14 best xlr splitters

• PRO-GRADE XLR Y SPLITTER CABLE is designed for a microphone, professional recording, mixing, or studio equipment with standard 3 pin XLR connectors; Connect a wireless mic cable to 2 different inputs such as an amplifier and mixer with this microphone Y cable
• AMP Y SPLITTER CABLE with a soft PVC jacket in a flexible 18 inch length easily connects to equipment with a single XLR output such as a DAC or guitar amplifier; Connect to a guitar amplifier with single XLR output or a DAC with single XLR output
• BALANCED AUDIO OPTIONS with this bi-directional XLR splitter female to dual male; Split a mic stereo to L R signal with this XLR stereo to mono cable; Combine a left and right signal to a single channel with this XLR combiner cable; Combine two audio feeds into a single audio track
• RUGGED METAL CONNECTORS have easy-grip treads, molded strain-relief boots, and gold-plated contacts to provide maximum flexibility, durability and longevity; Braided shielding provides 97.5% coverage for maximum cancellation of hum and noise; Polyethylene insulation improves high frequency response; Constructed with oxygen-free copper (OFC) conductors for delivering pristine sound
• XLR FEMALE TO 2x MALE CABLE is compatible with a wireless microphone, PA mixing board, DAC mixer, guitar amplifier or other equipment with a 3-pin XLR connectors

User questions & answers

Question:	If my wife & I both have an interface as well as a shared mixer. Would 2 of these split our mic outputs to our interfaces & the mixer
Answer:	It will work. I used my iPhone to play music, 2 splitters end went to : 1- mixer 2- tivi
Question:	Im looking to hook this up to my inferface that will have one phantom powered condenser mic and an SM57 to be used at the same time, will it work
Answer:	It will work but the condenser mic will pick voice up stronger than the other one. Be careful.
Question:	Does the dual make portions transmit identical sound? Or does it split into left and right
Answer:	RESPONSE FROM MANUFACTURER-CABLE MATTERS: The XLR Splitter cable will transmit identical sound, not into left and right. Please feel free to let us know if you have any further questions by contacting us through Amazon's messaging center. Open the product page, click on "Sold by Cable Matters" and then "Ask a Question”. Cable Matters Support Team
Question:	Can I add phantom power with my two audio interfaces to a condenser
Answer:	RESPONSE FROM MANUFACTURER-CABLE MATTERS: Yes, it should work. Please feel free to let us know if you have any further questions by contacting us through Amazon's messaging center. Open the product page, click on "Sold by Cable Matters" and then "Ask a Question”. Cable Matters Support Team

Product features

Feature-Filled 18 Inch Splitter

1. Gold-plated XLR pins
2. Connector strain-relief
3. Easy-grip design

Superior Construction

1. Oxygen-free copper conductors
2. Individual wire insulation
3. Overall braided shielding
4. Flexible PVC cable jacket

Audio Signal Splitter

• Split XLR output to 2x XLR inputs
• Convert a stereo mic to a L & R audio track
• Connect to a DAC or guitar amp with single XLR output

• Professional series XLR plugs, designed for equipments with 3-pin XLR connectors such as shotgun microphones, studio harmonizers, mixing boards, patch bays, preamps, speaker systems, and stage lighting
• Balanced mic cable with soft PVC jacket, strong and durable, good thick, but flexible
• The housing for high strength zinc alloy die-casting polished black spray paint, attractive and durable
• High quality noise free performance, locks with worry-free 2-years warranty
• Package include: 1 x 0.3 meter XLR male to two female cable

User questions & answers

Question:	I have two condenser mics, but my interface only has one 48v supported port and I want to record stereo. Will this splitter allow me to do so
Answer:	At first glance, I will say, "NO", the purpose of this "Y" cable is really the opposite, i.e., take two inputs and BRIDGE them into one output. So, you COULD feed your two condenser mics into this, and they would be able to work from the 48v phantom power supplied, BUT, the audio will be a summary of the two mics, that is, a monaural representation from the two mics.
Question:	Need to split monitor output from mixer to powered monitor and venue wall plug. Will this work or do I need a splitter box
Answer:	Im not sure what a venue wall plug is but this is definitely for sending audio signal. If you have powered speakers dont they have signal THRU, in and out
Question:	Does it allow simultaneous use of 2 mics capturing both to 1 XLR port, or is it 1-mic use at a time
Answer:	Dear Customer, Yes, the XLR male to dual XLR female cable allows simultaneous use of 2 mics. Any further question, please feel free to contact us. Thanks!

Product features

Nickel-Plated Pins

Professional Nickel-Plated Pins, anti-corrosion and oxidation resistance. With multiple plug-and-pull tests, this mic cable is perfect for your daily use.

Durable PVC Jacket

Durable PVC Jacket make this XLR to XLR microphone cable flexible and fashionable enough.

Double Shielded

Foil shielded and Metal braided shield make the sound quality undisturbed by external signals.

Product description

Add an additional microphone to the POWERED HOT SPOT (or other powered monitor) when all inputs are in use Permits phantom power to go to both microphones if available from the console

• Galaxy JIB/C Jacks in The Box/XLR Combiner
• Permits phantom power to go to both microphones if available from the console
• These JIB Boxes are: Constructed with a metal case

User questions & answers

Question:	Can you use this to take a stereo signal from my mixer and send it to one speaker
Answer:	Yes, it just combines any two signals into one.
Question:	I want to use one dynamic mic and one guitar (classical electric). Would that work
Answer:	This unit is best for two microphones, preferably the same type. In your case, you could use one dynamic microphone, but I’m betting that you’ll have to use a Hi-Z to Lo-Z transformer for your guitar. If you want to use one dynamic mic and one guitar, going into one input, you’d be better off getting a small mixer.
Question:	Can this splitter be used to redistribute mono signals (i.e., could one hook up an instrument cable to it and run to multiple amps
Answer:	There is one Mono input and 4 outputs which will duplicate the mono input to 4 other sources...ex: 4 amps. I use these in my PA setup to run 4 other amps from my non amped mixing consolel. I hope this helps.
Question:	I need to take a single mic xlr output from my mixer and split to to right and left channel to my camera's two xlr inputs. will this work
Answer:	Yes, it will work. But remember that a single XLR output is mono. You can split a mono signal and have two mono signals, but that is not the same as a stereo signal.

Product features

Galaxy Audio JIB/Y

The Galaxy Audio JIB/Y allows you to split a microphone to 2 different inputs. One application is splitting your microphone, first to the monitor board or powered monitor on stage and second to the front of house board. This will split your signal, giving you control of your own stage mix without affecting the house volume. Phantom block circuitry prevents interference from two different phantom power sources.

A Brief History of Galaxy Audio

Galaxy Audio began in 1977 with Superior Sound, operated by Brock Jabara and his partner Jim Pearce. They both had eight years of concert sound experience, and their rental products flanked the stages of concert halls and arenas all over the country, providing sound for Aretha Franklin, The Bee Gees, Janis Joplin, James Brown and countless others.

Brock and Jim soon developed the Hot Spot Personal Monitor. It was immediately a hit among musicians who used them. It was obvious that with some refinement, the new products could fill a long-standing void in the marketplace. Superior Sound began to metamorphose from speaker rental company to speaker manufacturing company. Galaxy Audio was born.

Galaxy Audio began enhancing the performance and quality of their product and expanded to include many new products and categories. We have experienced growth in areas we never expected, and our goal remains to provide great products and service for many years to come.

Product description

This XLR Female to Dual XLR Male Y Splitter Cable is designed to connect an XLR output to two XLR inputs. Compatible with any XLR connection-microphones, A/V electronic equipment,mixers, home theater devices, camcorders, speakers, etc.



Specification:

1- Durable PVC jacket helps to protect the cable against wear and tear.

2- Oxygen-Free Copper (OFC) conductors for enhanced signal clarity, Shielded cable reduces interference and excess noise.

3- Fully screened cable (shielded) - This prevents interference and reduces noise and crosstalk from other sources that may be situated around the cable. The signal produced is a lot cleaner with fewer defects. By using this cable a purer filtered signal path will be achieved.

4- XLR connectors with internal strain relief for rugged reliability.

5- Extra durable and flexible long life construction.

6- True balanced Lo-Z shielded cable and high quality noise free performance.

7- Nickel-plated connectors provide reliable contact.

8- Free velcro cable wrap included.



Note: we advice for anyone using a splitter like this for use with un-powered microphones is to only activate the phantom power on one of the channels, not both. phantom power on both inputs that it might cancel each other out or possibly damage the microphone or recording device.

• 3 Pin XLR female to Dual XLR male Y Cable, This Y-cable is designed to connect an XLR output to two XLR inputs, It is ideal for assigning the signal from a microphone to two channels on a mixing console.
• Compatible with equipments with 3-pin XLR connectors such as shotgun microphones, studio harmonizers, mixing boards, patch bays, preamps, speaker systems, mixer, amplifier, equalizer, limiter, crossover, digital decodersand stage lighting.
• Nickel Plated Connectors With Metal Serviceable Ends, OFC spiral shields for effective EMI and RFI rejection and flexibility.
• Balanced Connection - pin 2 is connected to pin 2, pin 3 is connected to pin 3, pin 1 is connected to pin 1. A balanced connection will help reduce interferance and produce a much stronger un-distorted signal.
• This cable just splits mono into two mono signals, It does not combine signals to make a stereo signal.

User questions & answers

Question:	Are these sturdy, good quality
Answer:	Very sturdy.
Question:	Will these work with phantom power
Answer:	It should work with phantom power, but I haven't tried it.
Question:	Will this fix on sony Z150 video camera
Answer:	You don't need this for the Z150 since you can already assign the external XLR input channels on the camera to be combined or separate using the camera's internal menu. Look for the INPUT1/INPUT1 option which will set the audio input on channel 1 to record on both channel 1 and channel 2. The INPUT1/INPUT2 Option keeps them separate.
Question:	Im thinking of purchasing the behringer powerplay p1 and it has a l and r input xlr. can i use this cable as a splitter to get the full sound
Answer:	Yes but you'll end up feeding the same signal to both inputs on the P1. Since the P1 has a stereo/mono switch, there's really no need to feed the same signal to both inputs, just switch it to mono.

Product description

The Hosa YXM121 cable is designed to connect an XLR output to two XLR inputs. It is ideal for assigning the signal from a microphone to two channels on a mixing console.

From the Manufacturer

• This cable is designed to connect an XLR output to two XLR inputs. It is ideal for assigning the signal from a microphone to two channels on a mixing console
• XLR connectors with internal strain relief for rugged reliability
• Oxygen-Free Copper (OFC) conductors for enhanced signal clarity.
• Please refer the Specification sheet before use.

User questions & answers

Question:	Does this work the other way? I need to pull two separate mic outs from a Shure wireless handheld/lav combo into a single input for house sound
Answer:	I recommend you don't do this if the two inputs are used at the same time. This will cause a degradation of the sound from both of them due to patial signal cancellation. To do this, you need a combiner such as a Pro AV2. However, this device uses 1/4" inputs to a single 1/4" out but it properly combines the two signals. "Y" connectors such as the one you've asked about are designed as splitters; not combiners.
Question:	Can I use this to go from a R and L XLR into a single XLR out
Answer:	No. Not according to schematic on the Hosa Technology web site. http://hosatech.com/wp-content/uploads/2013/11/YXM-100_Pinout.pdf There are cables available to do what you want, this isn't one of them. look for "stereo XLR adapter" or "stereo XLR to mono XLR"
Question:	Can i use it for clippers like to put the male nd the female in the middle of the clipper's cable
Answer:	Actuality it works , I use it like that once .
Question:	Connecting a shotgun to Zoom h5. if mic needs phantom power, do you power from both channels or just one? Any risk of damaging your microphone
Answer:	Sorry, just re-read your question. I am not familiar with the Zoom h5. If it provideds phantom power, then I would only power the mic from one channel.

Product features

Hosa YXM-121

This cable is designed to connect an XLR output to two XLR inputs. It is ideal for assigning the signal from a microphone to two channels on a mixing console.

Hosa Technology, Inc. is the top choice for premium cables, adaptors, and other audio and video accessories. As one of the leading suppliers of analog and digital connectivity solutions to the musical instrument, broadcast, theater, and professional audio/video industries, our products are manufactured to meet or exceed the demands of today’s professional.

Promise of Quality

We are committed to providing high quality products that meet or exceed our customers’ expectations through unparalleled value, customer service, and continual improvement of our business processes.

Mission

At Hosa, we are passionate about providing solutions to fulfill our customers’ needs through excellent service and superior value.

History

Founded in 1984, Hosa Technology established itself by bringing to the industry something it sorely needed: adaptors, many adaptors. As we turn to the future, Hosa stands firm on the promise to serve you, the customer.

About Hosa Technology

Headquartered in Buena Park, CA, Hosa Technology, Inc. is one of the leading suppliers of analog and digital connectivity solutions to the musical instrument and professional audio industries. Since the company’s inception in 1984, Hosa Technology’s consumer-driven inventory has expanded to include a full line of audio, video, and computer products. Enthusiasts and professionals alike rely upon Hosa Technology to deliver good performance and value both on the stage and in the studio.

Product description

This Balanced XLR splitter cables are ideal for connecting one XLR signal to two sources or inputs. They can be used for connecting two inputs of an amplifier from one (mono) signal or splitting your signal to go to two separate mixers (main mixer and monitor mixer). Anywhere that requires the splitting of a low level XLR signal.



Specification:

1- Durable PVC jacket helps to protect the cable against wear and tear.

2- Oxygen-Free Copper (OFC) conductors for enhanced signal clarity, Shielded cable reduces interference and excess noise.

3- Fully screened cable (shielded) - This prevents interference and reduces noise and crosstalk from other sources that may be situated around the cable. The signal produced is a lot cleaner with fewer defects. By using this cable a purer filtered signal path will be achieved.

4- XLR connectors with internal strain relief for rugged reliability.

5- Extra durable and flexible long life construction.

6- True balanced Lo-Z shielded cable and high quality noise free performance.

7- Nickel-plated connectors provide reliable contact.

8- Free velcro cable wrap included.

• This cable is designed to connect two XLR outputs to one XLR input, Ideal for mixer, amplifier, equalizer, limiter, crossover, digital decoders and more for stage speaker, KTV, home theater, etc.
• Balanced audio cables utilize impedance balanced lines that reduce EM and RF noise and extend the effective range of the cable run. Our XLR cable feature thick, heavy gauge wires, and sturdy connector housings
• Compatible with XLR equipment AV audio components to deliver quality audio connectivity; molded connectors with strain relief ensure a solid high-quality connection between the connected devices.
• Nickel Plated Connectors With Metal Serviceable Ends, OFC spiral shields for effective EMI and RFI rejection and flexibility.
• It splits closer to the XLR female ends, the distance to the split point is about 7.5 inches.

User questions & answers

Question:	How long is the distance from end to end from the split on a 10 ft cable
Answer:	Back when I bought it, it was only 3ft. The didn’t have 10ft cables.
Question:	Will this work for my Xone 92 mixer to one studio monitor
Answer:	It will if you're using XLR cable
Question:	All the connectors are gold plated
Answer:	No, the description on Amazon says "Nickel Plated Connectors".
Question:	with the 1.6 footer, if strtched out, what is the cord length in inches, from one female conenector to the other female connector
Answer:	Probably 1. 8 inches total. I plug mine in to the input letting it hang and then attach two mic cables. Works great.

Product description

TISINO One XLR Female to Two XLR Male Y Splitter Cable is designed to connect an XLR output to two XLR inputs. Compatible with any XLR connection-microphones, A/V electronic equipment,mixers, home theater devices, camcorders, speakers, etc.



Specification:

1- Durable PVC jacket helps to protect the cable against wear and tear.

2- Oxygen-Free Copper (OFC) conductors for enhanced signal clarity, Shielded cable reduces interference and excess noise.

3- Fully screened cable (shielded) - This prevents interference and reduces noise and crosstalk from other sources that may be situated around the cable. The signal produced is a lot cleaner with fewer defects. By using this cable a purer filtered signal path will be achieved.

4- XLR connectors with internal strain relief for rugged reliability.

5- Extra durable and flexible long life construction.

6- True balanced Lo-Z shielded cable and high quality noise free performance.

7- Gold-plated connectors provide reliable contact.

8- Free velcro cable wrap included.



Note: we advice for anyone using a splitter like this for use with un-powered microphones is to only activate the phantom power on one of the channels, not both. phantom power on both inputs that it might cancel each other out or possibly damage the microphone or recording device.

• Balanced XLR female to Dual XLR male Y Cable, This Y-cable is designed to connect an XLR output to two XLR inputs, It is ideal for assigning the signal from a microphone to two channels on a mixing console. Compatible with equipments with 3-pin XLR connectors such as shotgun microphones, studio harmonizers, mixing boards, patch bays, preamps, speaker systems, mixer, amplifier, equalizer, limiter, crossover, digital decodersand stage lighting.
• Balanced Connection - pin 2 is connected to pin 2, pin 3 is connected to pin 3, pin 1 is connected to pin 1. A balanced connection will help reduce interferance and produce a much stronger un-distorted signal.(NOTE: This cable just splits mono into two mono signals, It does not combine signals to make a stereo signal.)
• 20 AWG 4N Oxygen Free Copper with shielding ensure high fidelity sound quality and provide maximum conductivity and signal clarity.great choice for music lover, It's especially great for studio or live performances.
• With Heavy Duty 24K gold-plated XLR connectors,it could eliminate signal loss and static noise,provide durability and improve the signal transmission, and the copper shell blocks any interference which prevents the loss of sound quality. It splits closer to the XLR male ends, the distance to the split point is about 10 inches(25 cm).
• Heavy Duty Flexible Rubber and Nylon Braid Jacket Protect Your Cable, the outer diameter of the cable is 6.0mm(0.24 inch),Top quality and made by environment-friendly material, Polyethylene insulation improves high frequency response,strong, flexible and durable.

User questions & answers

Question:	Can it be used with a phase flip connector on one side of a figure 8 side mic, in a Mid-Side configuration
Answer:	Dont know that one
Question:	Is this compatible with a condenser mic requiring phantom power
Answer:	Yes sir

Product description

New Professional Studio Series Noise Free Cables by GLS Audio. They have a 6mm thick, high quality, flexible rubber jacket (not that cheap stiff plastic jacket like others sell). They are heavy duty Noise Free "True Balanced LO-Z" and have 3 pin XLR connectors on each end. These cables have dual insulated copper conductors plus they are shielded. They are hand wired & hand soldered and have high quality metal ends. The XLR's have the famous GLS Audio internal Tri-Grip strain relief and external rubber booty. You'll notice the newly developed GLS Audio Y-Grip technology. This special injection molded piece was designed to allow 6mm cable to be joined in a Y connection. Normal Y-Cables can't use thick 6mm cable because the connectors can't accept 6mm cables. Typical Y-Cables use 2mm, 3mm or sometimes 4mm cable. Our Y-Grip technology allows 6mm cable with 21g Copper Conductors.

• High Grade 21g Dual Copper Conductors
• XLR Tri-Grip & Rubber Booty Strain Relief
• True Balanced Lo-Z Shielded Cable
• Y-Grip Injection Molded Technology
• True Shielded Copper 6mm Cable

User questions & answers

Question:	How should this splitter be used with condenser mics and phantom power? Such as when sending audio to both a recorder and mixer at the same time
Answer:	When dealing with phantom power and mic splits, you should really have an isolation transformer involved. The isolation transformer will pass audio, but provide DC isolation between the two systems. The transformer would have an XLR female input (going to the mic), and two XLR male outputs (one direct output, in parallel with the input, and one isolated output which is on the other side of the transformer). The console connected to the direct output of the splitter has phantom power turned on. The console on the isolated side of the splitter has phantom power turned off. Since the iso transformer provides DC isolation between systems, there is no risk of damage to either console.
Question:	Are the ends serviceable? I need to reverse polarity on one end for briding an old proceed amp
Answer:	I am not looking at my Y cables, but I am 99.9% sure they are removable just like any other good XLR plug. The Y cables I bought have 2 Male XLRs on them so you may already have what you need. These are good rugged cables, so much better than the ones I made for myself before I found & bought 5 of these. NOTE: If you do take one end off, you may want to un-solder the wires off the plug & onto the new plug so you don't lose any length. All you need is a steady hand and patience.
Question:	Can i use this to split a telex/audiocom ifb feed
Answer:	Yes, definitely.
Question:	I would think they would work in reverse, splitting a XLR output to two sources? Would there be any loss of signal
Answer:	I use them in forward and in reverse, there is normal splitter loss, these are very useful at gigs as a plug gender switcher for signal distribution for powered speakers, mixers etc. No extra hiss is heard when I use this product, good quality, I have many.

Product description

Use this handy box when you need to split a line level signal up to 6 times*. Features 1 female XLR input wired to 6 male XLR outputs. Perfect when adding extra amplifiers to a system, connecting multiple powered speakers, splitting intercom lines, etc. Line level outputs can usually be split 6 times without noticeable loss of signal quality. The actual number of splits that can be accomplished depends on the level of the source signal and the impedances of the source and destinations in a particular application. It is not recommended that the SPLIT 6 be used to split a microphone level signal to more than two outputs. Attempting to do so may result in poor frequency response and reduced signal level. The SPLIT 6 may be used to split microphone level signals in most applications if this limit is observed.

User questions & answers

Question:	Does the signal in have to be balanced for the line outs to be balanced? I ask since I have an unbalanced source plugging into the input
Answer:	Yes. It’s not a DI, only a 6 way split. There is no isolation or balancing between the input and outputs.
Question:	Would this work to split a monitor send signal from a mixing board
Answer:	Yes, this will split one line level signal six ways.
Question:	Will this work if I have a camcorder that only has to xlr connections, will this allow for me two use more then two xlr devices now
Answer:	I'm not sure of your application but essentially this device allows you to split 1 x XLR 6 times. So, whatever you put in to the input comes out of all 6 outputs.
Question:	Is this thing powered? 12V power cord
Answer:	No. No power cord needed. Just plug in a monitor feed input and split up to 6 monitor outputs from the same input feed.

Product description

Deivnal XLR Female to Dual XLR Male Balanced Y Splitter Cable



Devinal XLR Y Cable is is designed to connect an XLR output to two XLR inputs and it may now be your best choice for assigning the signal from a microphone to two channels on a mixing console.



Specification



Type: XLR Female to Dual Male, 1 Feet

Connector(s) A: XLR (3-Pin) Female

Connector(s) B: Dual XLR (3-Pin) Male

Material: PVC shielding + 100% Pure Oxygen-Free Copper Wire

Color: Black

Length: 30cm/1 Feet

Diameter: 4.0mm

Package Contents



2 x Deivnal Professional Balanced Microphone Cable



Warranty:One Year Warranty and Product Support

• MATERIAL : Oxygen-Free Copper (OFC) conductors for enhanced signal clarity; OFC spiral shields for effective EMI and RFI rejection and flexibility.
• DURABLE : 24K gold-plated plugs for rugged durability and efficient signal transfer,High Quality Flexible Rubber Jacket
• EXCELLET SOUND : Balanced solid conductors, Dual Shielding, Corrosion-resistant Gold-Plated connecters making the sound signal transmits with minimal signal loss.
• COMPATIBILITY : Compatible with XLR equipment AV audio components to deliver quality audio connectivity; Molded connectors with strain relief ensure a solid high-quality connection between the connected device
• SERVICE : Length: 1 Feet / 30 cm ; Lifetime Product Support And Customer Serivce.

User questions & answers

Question:	Will this work if sound goes either way? Ex; amp to amp
Answer:	Yes

Product description

DISINO Balanced XLR splitter cables are ideal for connecting one XLR signal to two sources or inputs. They can be used for connecting two inputs of an amplifier from one (mono) signal or splitting your signal to go to two separate mixers (main mixer and monitor mixer). Anywhere that requires the splitting of a low level XLR signal.



★Premium Material & Quality:



- Heavy duty components.

- High Grade Oxygen Free Copper (OFC) for effective EMI and RFI rejection and flexibility.

- Durable and flexible crystal-nylon outer sleeve.

- Cotton Yarn Wrap to reduce noise.

- Inside aluminum foil shielding layer to reduce interference, for a better fidelity effect.

- Nickel-plated connectors provide reliable contact.

- Low-Loss 98.5% Copper Braided Spiral-Wound Shield provides maximum cancellation of hum and noise.

- 4N Oxygen-free copper conductors are encased in bare copper braid shielding to provide pure sound that is noise free.

- Gold-plated provide superior signal transfer and sound reproduction.

- Free velcro cable wrap included.



★Product Specifications:



Connector A : 2XFemale XLR

Connector B : Male XLR

Cable Conductors : Bare Copper

Jacket Material : PVC

Cable Gauge : 20 AWG

Cable Body Outside Diameter : 6.0mm / 0.24 inch

Length : 0.5 m / 1.6 Feet



Package Contents:



1 x Female XLR to Dual 1/4 Y Splitter Cable

1* Free velcro cable wrap



Warranty:One Year Warranty and Product Support

• ★【Function Design】Professional Series XLR Plugs, designed to connect two XLR outputs to one XLR input. It may be used to connect two microphones to one channel on a mixing console when a second channel is unavailable. Give you the perfect sound quality!
• ★【Multipurpose】This cable is Ideal Compatible with equipments with 3-pin XLR connectors such as shotgun microphones, studio harmonizers, mixing boards, patch bays, preamps, speaker systems, mixer, amplifier, equalizer, limiter, crossover, digital decodersand stage lighting.
• ★【Excellent Sound】Nickel Plated Connectors for resist corrosion and offer a clear, smooth-flowing optimal signal, ensures minimum signal loss transfer.Multiple metal-wound shield to effectively isolate electromagnetic interference, no noise and current to restore original sound quality.It splits closer to the XLR ends, the distance to the split point is 7.5 inchs(20 cm) .This cable just splits mono into two mono signals, It does not combine signals to make a stereo signal.
• ★【Professional Quality】22AWG 4N Oxygen Free Copper with shielding, Foil shielding and metal braid shield eliminate interference, deliver pristine sound, No hum, no noise, crystal clear music. High quality noise free performance,great choice for music lover, It's especially great for studio or live performances.
• ★【Incredible Durability】Heavy Duty Flexible PVC JackeJacket Protect Your Cable, the outer diameter of the cable is 6.0mm(0.24 inch),high durability. The thick copper braid is highly elastic.Cotton Yarn wrap reduces noise.made by environment-friendly material, Polyethylene insulation improves high frequency response,strong, flexible and durable.

Product description

Hosa cables are built with the hard-working, hard-touring musician or audio professional in mind. Hosa cables are exceedingly popular, due in part to their reputation as being one of the most affordable and high-quality cable lines in the business. Hosa cables have also received praise for their durability and excellent performance. When it comes to audio cable design, Hosa keeps a steady eye on the basics, and you can hear this attention to detail in their sound. To make your next music experience extraordinary, pick up a Hosa cable today!

• This cable is designed to connect two XLR outputs to one XLR input. It may be used to connect two microphones to one channel on a mixing console when a second channel is unavailable
• XLR connectors with internal strain relief for rugged reliability
• Oxygen-Free Copper (OFC) conductors for enhanced signal clarity

User questions & answers

Question:	can i connect 2 power speakers into my sound system
Answer:	No, this allows you to connect the left and right channels outputs to one speaker.
Question:	Can you plug this directly to a PA speaker
Answer:	Yes you can I have a couple of them myself.
Question:	I'm trying to run 2 sm57s through a dual cloudlifter with a y xrl to an external behringer phantom power supply. would this work without signal loss
Answer:	The SM57 microphones are intended for instruments so if you are using the dual Cloud Microphones CL-2 Cloudlifter 2-channel Mic Activator to amp up your signal then it should work just fine. However, you will lose the individual sound control from each microphone as it is combined in the splitter cable. Since you are using 2 identical microphones it ensures balance as the signals are combined.
Question:	I have two condenser mics, but my interface only has one 48v supported port and I want to record stereo. Will this splitter allow me to do so
Answer:	No. This is a sum of two sources, or double mono. What is does, it takes two mics and sums them together into one input. All stereo signals need two inputs. This splitter would work if you had an extra tom on a drum kit. You could record or mix two toms into one channel, however panning would pan BOTH toms, not give you the option to pan them left and right.

Product features

Hosa YXF-119

This cable is designed to connect two XLR outputs to one XLR input. It may be used to connect two microphones to one channel on a mixing console when a second channel is unavailable.

Promise of Quality

We are committed to providing high quality products that meet or exceed our customers’ expectations through unparalleled value, an industry leading customer service, and continual improvement of our business processes.

Mission

At Hosa, we are passionate about providing solutions to fulfill our customers’ needs through excellent service and superior value.

History

Founded in 1984, Hosa Technology established itself by bringing to the industry something it sorely needed: Adaptors, many adaptors. As we turn to the future, Hosa stands firm on the promise to serve you, the customer.

About Hosa Technology

Headquartered in Buena Park, CA, Hosa Technology, Inc. is one of the leading suppliers of analog and digital connectivity solutions to the musical instrument and professional audio industries. Since the company’s inception in 1984, Hosa Technology’s consumer-driven inventory has expanded to include a full line of audio, video, and computer products. Enthusiasts and professionals alike rely upon Hosa Technology to deliver world-class performance and value both on the stage and in the studio.

Product description

New Home Studio Series Noise Free Cables by GLS Audio. They have a 4mm high quality flexible rubber jacket (not that cheap stiff plastic jacket like others sell). They are heavy duty Noise Free "True Balanced LO-Z" and have 3 pin XLR connectors on each end. These cables have insulated copper conductors plus they are shielded. They are hand wired & hand soldered and have high quality metal ends. The XLR's have the famous GLS Audio internal Tri-Grip strain relief and external rubber booty.

• True Shielded Copper 4mm Cable
• True Balanced Lo-Z Shielded Cable
• XLR Tri-Grip & Rubber Booty Strain Relief
• High Grade 24g Dual Copper Conductors & Shield
• High Quality Noise Free Performance

User questions & answers

Question:	Arrgh, why only 6 inches? How about 24 inches, is such available
Answer:	The longest I've ever seen them is 0.3m or 1 foot. Cable creations.
Question:	Can this splitter be used to bring two microphone signals in to a single mixer preamp input
Answer:	This is the one you need, at least this is what I used in multi mic depositions: 6" Y-Cable Cord Splitter XLR-M to Dual XLR-F
Question:	Hey, I want to have two different signals, 1 to the main mixer and 1 to the monitor mixer. Can I use this splitter
Answer:	If you are talking about studio monitors, you can go to from an out to left and right monitors if the have an XLR input. Live the Y cables work better for if you want to combine mic signal into 1 channel. I currently use a Y cable for overhead drums due to my limited channels in the board.
Question:	Are these good for recording in stereo
Answer:	This splits a mono channel into 2 mono channels. It is not related to a stereo use.

• Professional series XLR plugs, designed for equipments with 3-pin XLR connectors such as shotgun microphones, mixing boards, patch bays, preamps, speaker systems, studio harmonizers, and stage lighting
• Dual XLR Male to XLR Female Y Cable, This cable is designed to connect one XLR outputs to two XLR input. It can be used to distribute the microphone signal to two channels on the mixer
• This XLR Splitter Patch Cable is made of 99.99% high purity oxygen-free copper(OFC), high transmission rate, the signal loss is very small.
• Balanced audio cables utilize impedance balanced lines ,Enhanced internal noise suppression,that reduce EM and RF noise and extend the effective range of the cable run
• 3 pin XLR Female to Dual XLR male, high quality metal housing,Designed for accurate transmission of digital audio and DMX lighting control data