12 best behringer amplifier

Product description

Ultra-Lightweight, High-Density 12000-Watt Power Amplifier

• Delivers 2 x 6000 Watts into 2 Ohms, 2 x 3400 Watts into 4 Ohms, 2 x 1700 Watts into 8 Ohms and weighs less than 26.5 lbs / 12 kg

User questions & answers

Question:	Do this amp drive 4 sub of precision devices pdn
Answer:	USB is limited to 2 channels each way (total of 4 channels) and is not configurable beyond that. This, in your case, you could have two mics panned to the right and the other two to the left, or any combination thereof, but there's only ever going to be 2 distinct channels going from mixer to PC (or Mac) via USB.
Question:	How to buy 240v input of this amp
Answer:	No, they won't plug into this in the way *I think* you want them to. There's a USB port on the back of this, but it's for interfacing with a computer, not for plugging USB microphones into it. Side note: I have an AT2020 USB, and I like it... but to use this mixing board with three AT2020s, you would need the XLR-type interface AT2020 mic, not the USB type. (Search for "AT2020 side address" on Amazon.)
Question:	Does it come with power supply cord
Answer:	It depends on two things - 1: what kind of mics you have and 2: if you need all of the audio recorded into separate channels on the computer. If you have 6 mics that are XLR or need phantom power, then this will not suit your needs - this can only power 4 XLR mics. (If you have what are called dynamic mics with 1/4" plugs - or self powered condensor mics that can use 1/4" jacks - then you are fine). For the second part (about separate channels) it really depends what you want to be able to do. The USB part of this mixer records just two separate channels into the computer - the same as the left and right main output of the mixer. So if you were to use 6 mics you would have them all recorded, but all together. (Thus, if someone was too quiet, you could not just turn them up after the fact.) You can use the panning to get two completely separate tracks, but that's clearly not enough for what you're trying to do. If you want to record all 6 tracks independently you will need something more expensive. I hope this helps!
Question:	I have rcf 18" subwoofer 1800w,so would this amp work on 8ohms
Answer:	One possible way to use the usb mic with this mixer ( and most mixers, due to interfacing) would be to run the usb mic into a PC, change the pc settings to mic monitoring, and run the audio out from the PC back into a channel on the mixer. Currently no one manufactures a USB female input to XLR Male output audio interface, to make the mic run with the board. You also may be able to link the mixer to your PC via the on-board USB mixer interface. Through the Behringer software you should be able map the USB mic to a bus in the mixer software for output. That would prevent you from having to run audio out of the PC with microphone monitoring enabled. Let us know if you have anymore questions. Thanks Dave @ DC Music Store

Product description

2-channel Power Amplifier, 3,000W Peak/ch at 4 ohms, with Stereo Crossover, SmartSense Loudspeaker Impedance Compensation, Zero-attack Limiters, Thermal Overload Protection, Twist-lock Speaker Connectors, and LED Meters

• Delivers 2 x 3000 watts into 4 ohms; 2 x 1600 watts into 8 ohms and weighs less than 13 lbs/ 5.9 kg
• Ultimate reliability through revolutionary cool-running high-density Class-D technology with "near-zero" Thermal buildup
• Ultra-efficient switch-mode power supply for noise-free audio, superior transient response and low power consumption
• Built-in stereo crossover with low-cut, high-cut and full range Mode
• Smartsense loudspeaker Impedance compensation features fully Linear frequency response at any speaker load Impedance

User questions & answers

Question:	What is rms of this amp
Answer:	I emailed behringer and they said to multiply the peak power rating by .7 and that gives you the rms rating. So this amp give 2,100 watts rms at 4 ohms and 1,100 watts rms at 8 ohms
Question:	What is the watts rms at 8ohms per channel
Answer:	2 x 1600 watts 8 Ohms peak
Question:	This amplifier can run into 240v input
Answer:	No
Question:	Is this amp similar to the I nuke
Answer:	Hi, It is an improvement over the I-nuke. I use the 6000's and each makes full use of a 120V power source (you can not get more than that out of anything that plugs in) at high levels. The improvements lead to better speaker protection and lower distortion. -R

Product features

NX6000

Ultra-Lightweight 6000-Watt Class-D Power Amplifier with SmartSense Loudspeaker Impedance Compensation

NX6000

The NX6000 power amplifier packs 6000 Watts (2 x 3000 Watts @ 4 Ohms; 2 x 1600 Watts @ 8 Ohms) into exceptionally lightweight (13 lbs / 5.9 kg) and rack-mountable packages. And because the NX6000 is so much more efficient than conventional designs, it runs cooler and doesn’t require the massive heat sinks and heavy toroid transformers typically associated with its conventional counterparts. Thanks to our “Zero-Attack” limiters that offer maximum output level with exceptionally-reliable overload protection and SmartSense Loudspeaker impedance compensation, which provides fully linear frequency response at any speaker load impedance, you can run the NX6000 full-out for hours on-end. Our revolutionary high-density Class-D technology, combined with an ultra-efficient, switch-mode power supply ensure this feather-light powerhouse will drive your rig effortlessly for many years to come.

Class-D - Massive Power, Perfect Sound

Thanks to our High-Density Class-D amplifier Technology, we are able to provide you with enormous power and incredible sonic performance in an easy-to-use, ultra-portable and lightweight package. Class-D amplification makes all the difference, offering the ultimate in energy efficiency – and eliminating the need for heavy power supplies and massive heat sinks. This amazing technology makes it possible to design and build extremely-powerful products that are significantly lighter in weight than their traditional counterparts, while using less energy and protecting the environment.

Sublimely Simple Operation

The front panel controls and indicators provide your system’s vital signs at a glance. After pressing the Power button, the Power LED lights to show the amp is ready for action. All channels feature positive-detent Gain controls with Signal LEDs that light when a signal is present, as well as Limit LEDs to indicate when the amplifier is running at full capacity. Just as elegant as the front, the rear panel is home to the combo XLR and 1/4" TRS Input connectors, making the NX6000 compatible with virtually any source, balanced or unbalanced. Professional twist-lock speaker sockets are provided to ensure every drop of output power gets to your loudspeakers. The NX6000’s built-in Crossover switch sets the amp to Full-Range mode, where the output is sent unfiltered to your loudspeakers, or Bi-amp mode, which sends only the low-frequency content (<100 Hz) to passive subwoofers, while the high-frequency content (>100 Hz) is channeled to your full-range loudspeakers.

Sound Value

Sporting massive output ratings, lightweight Class-D technology and an equally lightweight price tag – plus all the amenities a professional audio engineer could ask for – the BEHRINGER NX6000 power amplifier is a serious amp for your most demanding applications.

Experience the BEHRINGER NX6000 amplifier at your local dealer, or get yours online today, and find out why more and more professionals are turning to BEHRINGER amplifiers for their superb performance and extraordinary value.

Product description

Behringer A800 professional 800 Watt reference class power amplifier. You deserve the very best when it comes to your studio power amplification. Experience 800 Watts of love at first sound. Audiophile-grade performance, ultra-reliable and undeniable affordability – the Reference Amplifier A800.

• Ultra-linear power amplifier for recording studios, post-production, live sound and HiFi application
• 2 x 400 watts into 4 ohms, 800 watts into 8 ohms in Bridged mono operation
• Ultra-low Impedance design can drive virtually any passive speaker such as studio monitors, etc
• Advanced convection-cooling for absolutely noise-free and stable operation
• Precise level meter and clip indicators for accurate performance monitoring

User questions & answers

Question:	Is this amplifer 120v
Answer:	Yes
Question:	how wide is it not accounting for the rack mount mounts
Answer:	Not including the rack mounts, the case is 17" wide; but about 1/2" behind the rack mount is a set of round screw heads in the case on both side, so to be safe, I would say that width is 17.25" .
Question:	Can I use a bass preamp to drive this amp
Answer:	I'm using the amp in a home environment but it sounds great. Not sure how rugged it will be as a gig amp. Has inputs for RCA jack, Phone plug, and XLR, and outputs on Binding Posts and Speakon connectors. Should be good to go. Just make sure you don't overload the input.
Question:	Bridged watts rms vs peak? Looking to hook up a big sub is the 800 watts peak or rms
Answer:	This amp doesn't deliver 800 watts. As close as I can tell it's about 275 watts 4 ohm x 2 . So maybe around 550 watts bridged.

Product features

A800

Professional 800-Watt Reference-Class Power Amplifier

• Ultra-linear power amplifier for recording studios, post-production, live sound and HiFi application
• 2 x 400 Watts into 4 Ohms, 800 Watts into 8 Ohms in bridged mono operation
• Ultra-low impedance design can drive virtually any passive speaker such as studio monitors, etc.
• Advanced convection-cooling for absolutely noise-free and stable operation

• Independent DC, LF and thermal overload protection on each channel automatically protects amplifier and speakers
• Ultra-efficient switch-mode power supply for noise-free audio, superior transient response and low power consumption

Reference Amplifier

The Reference Amplifier A800 is the ideal choice for home and professional recording studios, post-production suites, or anyone seeking audiophile-grade performance – without the audiophile-grade price tag! A professional 800-Watt ultra-linear power amplifier, the A800 provides stunningly-accurate audio reproduction – without the slightest hint of distortion or artificial coloration common to many competing products. Thanks to its ingenious servo-controlled design, and the high-level components used throughout, the A800 boasts remarkable specs and unrivaled sonic performance.

The A800 Really Delivers

Professional audio engineers the world over are impressed by the A800’s performance – and surprised by its affordability. Capable of delivering 2 x 400 Watts (4 Ohms) and 800 Watts 8 Ohms in bridged-mono mode, the A800 exhibits massive headroom for the utmost in pristine audio reproduction. The A800’s advanced convection-cooling technology ensures stable, noise-free operation – while the servo-controlled design allows it drive virtually any passive speaker system.

Metering and I/O

A precise level meter with input clip and channel protection LEDs are provided for accurate performance monitoring. Input connections are provided in the form of balanced XLR and 1/4" TRS connectors, as well as unbalanced RCA sockets, ensuring you have loads of input options. Plus, the speaker outputs give you the choice between professional twist-lock and binding post connectors.

Class-D - Massive Power, Perfect Sound

Thanks to our High-Density Class-D amplifier Technology, we are able to provide you with enormous power and incredible sonic performance in an easy-to-use, ultra-portable and lightweight package. Class-D amplification makes all the difference, offering the ultimate in energy efficiency – and eliminating the need for heavy power supplies and massive heat sinks. This amazing technology makes it possible to design and build extremely-powerful products that are significantly lighter in weight than their traditional counterparts, while using less energy and protecting the environment.

SmartSense Impedance Compensation

Our new SmartSense Technology puts the punch back into Class-D amplification, providing vastly improved full-range frequency response with more powerfully-dynamic bass, and smoother high-frequency reproduction. The resulting output is no longer dependent on the actual load, but is rendered perfectly ruler flat via impedance compensation. A800's design also incorporates a significantly-higher damping factor that yields better amplifier control over the loudspeaker for stronger audio reproduction – especially in the LF area.

Superior Sound Quality

You deserve the very best when it comes to your studio power amplification. Experience 800 Watts of love at first sound. Check out the A800 at your authorized BEHRINGER dealer, or place your order online today!

Audiophile-grade performance, ultra-reliable and undeniable affordability – the Reference Amplifier A800.

Product description

Behringer NX6000D 6000W power amplifier - The NX6000D power amplifier packs 6000 Watts (2 x 3000 watts @ 4 Ohms; 2 x 1600 watts @ 8 Ohms) into exceptionally lightweight (13.2 lbs/ 6.0 kg) and rack-mountable packages. Plus, the built-in DSP and 24-bit/ 96 kHz converters ensure the ultimate signal integrity with an extremely broad dynamic range. And because the NX6000D is so much more efficient than conventional designs, It runs cooler and doesn't require the massive heat sinks and heavy toroid Transformers typically associated with its conventional counterparts. Thanks to Behringer “zero-attack” limiters that offer maximum output level With exceptionally-reliable overload protection and SmartSense loudspeaker impedance compensation, which provides fully linear frequency response at any speaker load impedance, you can run the NX6000D full-out for hours on-end. Behringer revolutionary high-density Class-D technology, combined with an ultra-efficient, switch-mode power supply ensure this feather-light powerhouse will drive your rig effortlessly for many years to come. - thanks to Behringer high-density Class-D amplifier technology, they are able to provide you with enormous power and incredible sonic performance in an easy-to-use, ultra-portable and lightweight package. Class-d amplification makes all the difference, offering the ultimate in energy efficiency – and eliminating the need for heavy power supplies and massive heat sinks. This amazing technology makes it possible to design and build extremely-powerful products that are significantly lighter in weight than their traditional counterparts, while using less energy and protecting the environment.

• Delivers 2 x 3000 watts into 4 ohms, 2 x 1600 watts into 8 ohms and weighs less than 13.2 lbs/ 6.0 kg
• Ultimate reliability through revolutionary cool-running high-density Class-D technology with "near-zero" Thermal buildup
• Ultra-efficient switch-mode power supply for noise-free audio, superior transient response and low power consumption
• High-performance DSP and 24-bit/96 kHz converters deliver ultimate signal integrity and extreme dynamic range
• Dsp section features sophisticated delay, crossover (3 filter types, up to 48 dB/octave), EQ (8 parametric, 2 dynamic), dynamics processing and lockable security settings

User questions & answers

Question:	Como hago para comprar aqui. Los precios son en dolar americano? O dolar tt
Answer:	Amazon está en dólares estadounidenses pero solo enviamos en los Estados Unidos Estados BNC Electronics
Question:	Is this amp stable into 2 ohms a channel
Answer:	The specs specifically place a line on the table in the 2 ohm per channel column, indicating that it’s not compatible, unlike other bridged versions of the amp, so I don’t think so. Being an engineer, I believe it would probably work up to a point but I wouldn’t want to push it too hard otherwise it could screw up the output stage. Hope this helps...
Question:	I have an inuke with dsp, can i control this nx amp with it? or do i need to download different software
Answer:	Ok, if you're asking if the NX GUI is the same as the INuke Gui, it is the same. Hope this helps. Jeff
Question:	Is this designed fro 120 V or 120-240 V
Answer:	I believe these amplifiers do not have a universal power supply so they are design to operate in the 110V and 120V range.

Product features

NX6000D

• Delivers 2 x 3000 Watts into 4 Ohms, 2 x 1600 Watts into 8 Ohms & weighs less than 13.2 lbs / 6.0 kg
• Ultimate reliability through revolutionary cool-running High-Density Class-D technology
• Ultra-efficient switch-mode power supply for noise-free audio, superior transient response
• High-performance DSP and 24-bit/96 kHz converters deliver ultimate signal integrity

NX6000D

The NX6000D power amplifier packs 6000 Watts (2 x 3000 Watts @ 4 Ohms; 2 x 1600 Watts @ 8 Ohms) into exceptionally lightweight (13.2 lbs / 6.0 kg) and rack-mountable packages. Plus, the built-in DSP and 24-bit/ 96 kHz converters ensure the ultimate signal integrity with an extremely broad dynamic range. Thanks to our “Zero-Attack” limiters that offer maximum output level with exceptionally-reliable overload protection and SmartSense Loudspeaker impedance compensation, which provides fully linear frequency response at any speaker load impedance, you can run the NX6000D full-out for hours on end.

Class-D - Massive Power, Perfect Sound

Thanks to our High-Density Class-D amplifier Technology, we are able to provide you with enormous power and incredible sonic performance in an easy-to-use, ultra-portable and lightweight package. Class-D amplification makes all the difference, offering the ultimate in energy efficiency – and eliminating the need for heavy power supplies and massive heat sinks.

NX DSP

For sound engineers requiring high-level control capability, the NX6000D amplifier comes ready for action right out-of-the-box. The built-in DSP and 24-bit/96 kHz converters ensure the ultimate signal integrity with an extremely broad dynamic range. DSP section features sophisticated delay, crossover (3 filter types, up to 48 dB/octave), EQ (8 parametric, 2 dynamic), dynamics processing and lockable security settings. A convenient front panel LCD display allows you to setup and make adjustments directly at the amplifier, without the need for a PC.

NX EDIT Remote Control Software

You can also set up, control and monitor your NX6000D amplifier using your computer via USB – and immediately gain access to a whole new level of amplifier control. NX EDIT is the ideal way to manage installed systems, and to create custom presets for live sound and production environments.

Product description

The rackmountable EP2000 EUROPOWER power amp from Behringer delivers up to 2 x 1,000 watts at 2 ohms, 2 x 750W at 4 ohms, and 2,000W at 4 ohms in bridge mode. Its Precise Power, Signal, and Clip LEDs let you monitor performance, and its XLR and 1/4" TRS jacks allow for compatibility with any source. Selectable low-frequency filters let you remove distracting infra-sound frequencies, and its independent DC and thermal overload protection on each channel automatically protects your amp and speakers without stopping the show. The Behringer EUROPOWER's professional speaker connectors and "touch-proof" binding posts support most speaker wiring systems.

• 2 x 1,000 Watts into 2 Ohms; 2 x 750 Watts into 4 Ohms; 2,000 Watts into 4 Ohms (bridge mode)
• ATR (Accelerated Transient Response) technology for ultimate punch and clarity
• Switchable limiters offer maximum output level with reliable overload protection
• Detented gain controls for precise setting and matching of sensitivity
• Precise Power, Signal and Clip LEDs to monitor performance

User questions & answers

Question:	Can you hook up 4 8-ohm speakers to this ep2000? if so, in parallel or in series? is the 2,000 watts rms or peak
Answer:	yes
Question:	I got the ep2500 version. manual states bridged 4ohm=2400w. will this drive a kicker comq 15" 2 ohm cwq15 (1100rms) in sealed 6ft^3 box in my garage
Answer:	check sticker or buy uk version
Question:	is this product 120 volt or
Answer:	Technically, it does not. I will paste the statement of 1 reviewer (Nathan) that pretty much sums it up. "You have to make your own power cord given the supplied Neutrik connector. A few feet of 10 gauge wire and a 20 or 30 amp end to plug it into 120v or 220v respectively and you are set."
Question:	If i have 2 passive speakers (250w cont/1000w peak) will a 2000 watt amp be cutting too close? Should i go with a 4000 watt model
Answer:	Yes it will

Product description

The rackmount EP4000 EUROPOWER power amp from Behringer delivers up to 2 x 2,000W at 2 ohms, 2 x 1400W at 4 ohms, and 4,000W at 4 ohms in bridge mode. Its Precise Power, Signal, and Clip LEDs let you monitor performance, and its XLR and 1/4" TRS jacks allow for compatibility with any source. Selectable low-frequency filters let you remove distracting infra-sound frequencies, and its independent DC and thermal overload protection on each channel automatically protects your amp and speakers without stopping the show. The Behringer EUROPOWER's professional speaker connectors and "touch-proof" binding posts support most speaker wiring systems.

The EP2000 and EP4000 represent everything musicians love about Behringer's popular EP1500/EP2500--excellent sound quality, road-worthy toughness and reliability, low-noise operation and incredible power. With 2,000 and 4,000-Watts respectively, the EP2000 and EP4000 amplifiers are perfect for medium-sized club gigs, mobile PA systems, church services or public spaces.

Excellent sound quality, road-worthy toughness and reliability, low-noise operation and incredible power. Click to enlarge.

Professional speaker connectors and "touch-proof" binding posts support most speaker wiring systems.

XLR and 1/4" TRS input connectors for compatibility with any source.

Everything You Need, Nothing You Don't

The über-simple front panel controls of these amps give you all of your sound's vital signs at a glance. After flipping the MAIN switch, the POWER LED will light when the amp is ready for action. Both channels have independent gain dials as well as clip LEDs that indicate when the signal is distorted and you need to reduce the gain. There are also SIGNAL LEDs that light up when a signal is present at the input.

Panel Discussion

A panel of switches found on the back panel offers an array of cool options to apply to both channels of the EP2000 and EP4000. The Clip Limiter lets you get even more out of the amplifier without overdriving either it or your speaker system. Built-in circuitry automatically senses when the EP2000 or EP4000 is being overdriven into "clipping" and then momentarily reduces the input level to avoid clipping distortion. This all happens in a few thousandths of a second, so it's an inaudible way of avoiding audible clipping distortion. Of course, you can turn the Limiter off if you're feeling lucky.

Ultra-low frequency sounds (infrasonics) are caused by rickety stage vibrations, mic thumps and wind noise. While technically inaudible, they can cause a huge drain on amp power, potential damage to your speakers and a sludgy sound in the audible bass ranges. Both EP models feature a defeatable Low Cut Filter that chops off unwanted frequencies below 50Hz or 30Hz (depending on your PA system's capabilities).

The same panel contains the switches that allow you to put these amps to work in either stereo or bridge (mono) mode. Both the EP2000 and EP4000 can be linked to additional power amps by switching into parallel mode.

These Amps Have Guts

There's plenty of awesome features on the outside of the EP2000 and EP4000, but there's also a team of cool components on the inside helping it work its magic. They come loaded with famously reliable Toshiba/Fairchild power transistors as well as a high-current toroidal transformer for ultra-high transient response and further reliability. Independent DC and thermal overload protection on each channel automatically protects the amplifier and speakers from any show-stopping meltdowns. There's no need for fuses, giving you one fewer potential mid-gig headache.

The EP2000 and EP4000 have both XLR and 1/4" TRS inputs. Even the outputs are totally flexible, consisting of Speakon-compatible outputs and five-way binding posts. Whether you're dealing with bare wire or boutique audiophile cabling, the EP2000 and EP4000 are right at home.

The exhaust fan, visible on the back panel, is the final stage of an internal front-to-back cooling system that keeps these amps working in the mild temperatures they love, even through periods of extended use. Finally, an impact-resistant, all-steel 2U rackmount chassis helps these workhorses stand up to all the rigors of the road.

Accelerated Transient Response Delivers the Knock-Out Punch

It takes huge pulses of energy (current and voltage) to propel a woofer cone out fast enough to match a bass beat. That's called Transient Response and it's the holy grail of amp designers. By carefully selecting transistors with extremely highslew rates and optimizing other proprietary parts of our circuitry, our amps are able to react instantly to even the most demanding electronic bass impulses. If the woofers in your PA system can keep up, your audience will hear a tighter, crisper, more natural sound.

The Legend Powers On

If you read the reviews of the EP2000 and EP4000's older brothers, the EP1500 and EP2500, and it's clear that those amps are renowned not only for their performance and durability, but also their astoundingly low price tags. The EP2000 and EP4000 extend that legacy to the next level.

What's in the Box

Behringer Europower EP4000, Power Cable, User's Manual

• 2 x 2,000 Watts into 2 Ohms; 2 x 1,400 Watts into 4 Ohms; 4,000 Watts into 4 Ohms (bridge mode)
• ATR (Accelerated Transient Response) technology for ultimate punch and clarity
• Switchable limiters offer maximum output level with reliable overload protection
• Detented gain controls for precise setting and matching of sensitivity
• Precise Power, Signal and Clip LEDs to monitor performance

User questions & answers

Question:	How many libras weighs
Answer:	That's exactly what I use it for.
Question:	Input power 120v or 230v
Answer:	It has a USB interface and comes with a USB cable.
Question:	Can someone explain the clip limiter switch & why I'de want it on or why I'de want it off? How's this setting related to the clip light on the front
Answer:	Yes!
Question:	Can this be used for just powering the front left and right speakers rated at 10-250 watts rms and 600 max? or stick with onboard avr
Answer:	I am very happy with the reverb and echo effects. I have the 1202FX. you have total control, I have a much bigger control and cost more but I like the control I have with the 1202FX reverb. I ran a 5 piece band with big equipment and this mixer could have ran the whole show. Wish I could have had it in the day. I would consider myself a pro, made a living at it for several years.

Product description

The ULTRATONE K900FX specializes in clean, powerful sound. With this 90-Watt workhorse in your rig, your keyboards will sound their best gig after gig.

Your keyboards will sound their best, gig after gig. Click to enlarge.

Full 3-channel operation with separate Volume and FX Send per channel.

Plenty of connectivity, including a subwoofer out and RCA input.

Channel Your Sound

The K900FX gives you three channels, each with separate volume and FX SEND controls, plus Channel 1 has an additional XLR mic input for direct connection of a dynamic microphone. So, if you're the kind of keyboardist with multiple instruments at your disposal, the K900FX is ready to handle up to three independent signals. It is also ideal for use as an all-in-one solution for keys and vocal applications.

The MAIN Section gives you separate controls for FX RETURN, MASTER VOLUME, PHONES and SHAPE.

Built-In Effects

The onboard 24-bit digital FX processor, with 100 amazing presets, adds a high-tech dash of reverb, chorus, flange, delay, pitch shift and other effects to your sound.

CD Input/Headphone Out

A CD input allows you to play recorded music through the K900FX during performance breaks (or just for playing along), great for CD players, MP3 players, or anything else you want to hook up. A separate headphone output is perfect for quiet practicing.

Stand Mountable

The K900FX also features an integrated 35-mm pole socket for stand mounting and use as a PA system.

Big, Beautiful BUGERA

A 12" BUGERA woofer, made completely in-house by our own skilled artisans, works in connection with a custom-made 1.0" driver for awesome, full-range sound. The K900FX also features a subwoofer output, as well as a line output for direct connection to your mixing console.

Be EQ'd and Feedback-Free

Use the K900FX to bring out the best in your sound via its 5-band graphic EQ with our proprietary FBQ Feedback Protection System. This incredible audio solution immediately pinpoints frequencies that cause feedback, so you get perfect sound every time.

What's in the Box

Behringer K900FX, Power Cable, User's Manual

• Ultra-flexible 90-Watt 3-channel PA System / Keyboard Amplifier
• Powerful 12'' BUGERA woofer and custom-made 1'' driver for ultimate sound reproduction
• Integrated digital FX processor with 100 awesome presets including reverb, chorus, flanger, delay, pitch shifter and various multi-effects
• Revolutionary FBQ Feedback Detection System instantly reveals critical frequencies
• Full 3-channel operation with separate Volume and FX Send per channel

User questions & answers

Question:	can you use sep. effects petals, i have a volcal harminizer effects petal,can that be hooked up to my mic
Answer:	Yes! It gives a clean sound, easy to carry, and loud enough for medium size places. I used these for church and they were perfect.
Question:	Can I use it on 220V
Answer:	600 watts !!! No way, try to compare this with another amp such as Roland keyboard amp.I own a Behringer K1800FX, rated at 180 watts, same look and physical size as this one and I would say it delivers about 80 watts at most. This kind of output rating gives me lot of doubts about the manufaturers of lower quality brands (such as Behringer, Pyle, etc...). ROLAND, FENDER don't do that.
Question:	Can I use this as a vocal amplifier/PA
Answer:	I know this is an old question but my answer will apply to just about any amp with a stereo link. A stereo link allows you to connect another amp. The output sends the signal to another amp and the input receives the signal from another amp. Adding another KXD12 using the stereo link would give you a total of 8 channels to work with. I can also say that this will also function as a built in effects loop because I have used it that way.
Question:	Is this amp mainly used for keyboards or acoustic guitars? What is it best suited for
Answer:	Yes, this amp sounds nice for that. However, if you are looking for a LOUD amp this one might not be enough. I recommend you use a preamp or boost your output signal to the KXD12 for best results. It also works good when connected to a PA system. On a side note, I have had intermittent issues with the built in effects unit and the eq sliders are a bit delicate. Overall, for the money I paid, I’ve been happy with the KXD12.

Product description

Delivers 4 x 1600 watts into 2 ohms, 2 x 3000 watts into 4 ohms and weighs less than 13.4 lbs/ 6.1 kg Ultimate reliability through revolutionary cool-running high-density Class-D technology with "near-zero" Thermal buildup Ultra-efficient switch-mode power supply for noise-free audio, superior transient response and low power consumption Built-in stereo crossover with low-cut, high-cut and full range Mode Smartsense loudspeaker Impedance compensation features fully Linear frequency response at any speaker load Impedance

• Delivers 4 x 1600 watts into 2 ohms, 2 x 3000 watts into 4 ohms and weighs less than 13.4 lbs/ 6.1 kg
• Ultimate reliability through revolutionary cool-running high-density Class-D technology with "near-zero" Thermal buildup
• Ultra-efficient switch-mode power supply for noise-free audio, superior transient response and low power consumption
• Built-in stereo crossover with low-cut, high-cut and full range Mode
• Smartsense loudspeaker Impedance compensation features fully Linear frequency response at any speaker load Impedance

User questions & answers

Question:	Hi.. does the behringer power amplifier nx4-6000 come in 220-240 v electrical power
Answer:	No, for that you need a power-amp/mixer. This is just a mixer.

Product description

BEHRINGER AIR 12 CH DIGITAL MIXER. Free iOS, Android and PC/Mac/Linux apps available for remote operation via Ethernet, LAN or WiFi

• iPad*/Android* tablet controlled 12-input digital mixer for studio and live application
• 4 award-winning MIDAS-designed, fully programmable mic preamps for audiophile sound quality
• Built-In Tri-Mode Wifi router for direct operation—no need for external routers.40-Bit floating-point DSP features "unlimited" dynamic range with no internal overload and near-zero overall latency
• Revolutionary Dugan*-style Auto-Mixing automatically manages microphone gain sharing
• USB connector for uncompressed stereo WAV recording and playback
• Computer Connectivity: Wi-Fi, Ethernet

User questions & answers

Question:	saludos es compatible con windows o con una laptops
Answer:	I am not familiar with that particular amp. The purpose of this product is to model a wide variety of amps and pedals. It does this quite well, and it is very easy to operate both programming and using it to play (I use it on stage). I run it to a passive board and then to powered speakers. So, running it through a modeling amp isn't necessary. That being said, if you set the amp to play without effects, the sound quality will likely reflect the quality of that amp. This product will only make it sound better.
Question:	Does this unit retain its mix settings after it powers off and back on again
Answer:	Prolly... I think the screens are plastic... not actual glass. Mine is holding up pretty well tho... I've has it at least a year now and no scratches, but I am pretty careful with it.
Question:	Is the Dugan enabled on this yet
Answer:	I'm not a professional musician but friend of mine who are are very impressed with it, and believe it would work well live. mine is used mainly in a studio inviroment
Question:	When recording will it be in separate channels
Answer:	I ordered it, but stillI did not get it. They said that “ get it before Christmas “ but I did not get it. I bought for gift. May be I will return it. If I can not get by tomorrow. Thank you.

Product features

X AIR XR12

The BEHRINGER X32 completely changed the game by rethinking what is possible from a digital mixer. Now, that same incredible technology has been incorporated into a small, but incredibly powerful, rack-mountable mixer that will forever change both the way you record – and the way you play live music.

The revolutionary XR12 is a powerhouse 12 input portable/rack-mountable mixer for iPad and Android tablets, and is ideally suited for both live and studio applications, thanks to its 4 MIDAS-designed mic preamps, convenient integrated Wifi module for wireless control, USB connectivity for file storage, system updates and uncompressed stereo recordings via the USB Stereo Recorder.

MIDAS – The Legend in Sound Quality

BEHRINGER is proud to incorporate MIDAS designed mic preamps for the ultimate in high-quality audio reproduction in both live and studio environments.

Built-In Tri-Mode Wifi Router

Designed for the ultimate in mobility, the XR12 comes with an integrated Wifi module for direct control of your mixer’s functions–without the need to setup and configure an external router. The XR12 gives you the freedom to focus on your mix, while allowing you to move about the venue to experience what every part of the audience is hearing. Plus you can adjust live monitor wedges from the artist’s perspective – or better yet, let them mix their own IEMs and floor monitors via their own tablets.

1. Access Point is the easiest way to connect up to 4 clients directly and concurrently (i.e, iPad, Android smartphone/tablet or laptop). This mode should have your remote control up and running in less than a minute.

2. Wifi Client allows you to add your mixer to the existing wireless network where the controlling apps and devices are connected.

3. Alternately, wired connections can be made directly to your PC, to a local area network (LAN), or when connecting to a dedicated Wifi router.

Revolutionary Auto-Mixing

When your application calls for a multiple-microphone setup, such as an onstage panel discussion, press conference or courtroom proceeding, etc., it can become a challenge to maintain so many open mics – and preserve maximum gain and priority for the moderator.

A major first for compact audio mixers, our revolutionary X AIR Gain Sharing technology can easily manage fully automated mixes with several live microphones. Based on the Dan Dugan automix system, the XR12’s gain sharing paradigm automatically controls the levels of all selected microphones in real time, without any gating artifacts or noise modulation.

This function dramatically reduces the typical feedback, studio noise and comb filtering challenges that can occur when two, or more mics are in close proximity of each another. X AIR Gain Sharing technology provides a consistent system gain structure, even when multiple speakers are talking at the same time.

4 Onboard X32 Effects Engines

Equipped with FX engines, the onboard virtual FX Rack provides access to four true-stereo (8 mono), multi-effects processors including delay, chorus, dynamics – plus the XR12 can run production-quality, true-stereo reverbs concurrently with 31-band EQ on the main and aux buses, all without the need for any additional hardware.

You can select any combination of high-end simulations of legendary studio effects, such as the Lexicon 480L and PCM70, as well as the EMT250 and Quantec QRS reverbs. Onboard processing means your computer doesn’t have to do the heavy lifting during a mixing session with DAW plugins as the XR12 has a whole studio of FX under it’s hood.

Custom-designed, and physically modelled after some of the most iconic processors, all effects run inside the low-latency environment of the X32 mix engine, ensuring flawless performance, flexible routing and the end of cable faults!

USB Connectivity and Stereo Recording

The front panel USB type-A connector makes the XR12 not only an amazingly powerful digital mixing solution, but also allows recording your live stereo tracks directly to attached USB flash media or hard drives. Dial in the perfect live mix with effects and zero-latency, while sending a dedicated stereo mix to your thumb drive for recording, or play background music in a break.

Whether you’re making rock history in the studio, or you want to capture intimate live performances – it’s never been easier to record stunning tracks with exceptional clarity.

Product description

Behringer HA8000 V2 8-Channel High-Power Headphones Mixing and Distribution Amplifier

• Professional, multi-purpose headphones amplifier system for stage and studio applications
• Highest sonic quality with virtually all types of headphones even at maximum volume
• 8 totally independent stereo high-power amplifier sections in one rack space
• 2 stereo Main inputs for two independent mixes, accessible from all 8 output channels
• 8 independent Direct inputs provide up to 8 individual stereo mixes

User questions & answers

Question:	Does this come with cables or do I need to purchase anything extra
Answer:	good
Question:	lookingfor a surround sound amplifier to handle 6 speakers or 5 speakers+ 1 woofer
Answer:	This is not a powered mixer. It only outputs a signal
Question:	Can I use both phone outs at once? Any changes in decibels when both are used
Answer:	amazon
Question:	Can i listen to a mono mix in both ears with this amp? i would be coming out of a behringer x32 with xlr mono output & convert to 1/4 in. mono input
Answer:	Unless you purchase a premo mixer a bit of hum is to be expected. I even have a bit of channel bleed thru, but you get what you pay for.

Product description

BEHRINGER KM750 Professional 750-Watt Stereo Power Amplifier with ATR (Accelerated Transient Response).

• 2 x 400 Watts into 4 Ohms; 2 x 200 Watts into 8 Ohms; 750 Watts into 8 Ohms (bridge mode)
• ATR (Accelerated Transient Response) technology for ultimate punch and clarity
• Switchable limiters offer maximum output level with reliable overload protection
• Precise power, signal and clip LEDs to monitor performance
• XLR, 1/4'' TRS and RCA input connectors for compatibility with any source

User questions & answers

Question:	Can i drive Bose Acoustimas 5 stereo speakers with this power amp
Answer:	The Acoustimas speaker system utilizes a built in amplifier within the bass speaker that powers the smaller satellite speakers. Essentially any power from this amplifier is filtered by the Acoustimass bass speaker before powering your smaller speakers. You would be better off exploring stereo receiver/amplifiers from Onkyo, Denon, Sony, etc, that have more features than a simple amplifier such as this.
Question:	Can this be used as bass amplifier with a head as preamp
Answer:	I'm guessing you are asking about a bass guitar? & yes it should be fine if the speaker "cab" is not going to ask for more than 3-400 watts? You are in the pro category & can find help from the pro's @ Sweetwater which is where I bought mine from.
Question:	Can i plug an rca device and an xlr device in the input at the same time? can the xlr be a mic, or do i need a preamp
Answer:	technically yes, but i wouldnt recommend it. part of the signal will go through, but it will be massively distorted and far quieter than it should be. it might also damage the amp and/or your devices plugged into it. as far as using it for a mic, you will almost certainly require a pre-amp unless youre going through an EQ or effects chain before the amp, in which case youll probably be fine.
Question:	I have a Crown cdi1000. Each channel driving 4 x 8-ohm speakers - too complicated. Will this work in place
Answer:	Yes

Product features

BEHRINGER KM750, Black

• 2 x 400 Watts into 4 Ohms; 2 x 200 Watts into 8 Ohms; 750 Watts into 8 Ohms (bridge mode)
• ATR (Accelerated Transient Response) technology for ultimate punch and clarity
• Switchable limiters offer maximum output level with reliable overload protection
• Precise power, signal and clip LEDs to monitor performance
• XLR, 1/4'' TRS and RCA input connectors for compatibility with any source
• Professional speaker connectors and "touch-proof" binding posts support most speaker wiring systems
• Independent DC and short circuit protection on each channel automatically protects amplifier and speakers
• High-current toroidal transformer for ultra-high transient response and absolute reliability
• Active cooling on heatsink
• "Built-like-a-tank" impact-resistant, all-steel 2U rackmount chassis

KM750

The remarkable KM750 packs a heart-stopping 750 Watts of output power into a lightweight (18.7 lbs/8.5 kg) package, thanks to our Accelerated Transient Response (ATR) technology. Ample power (750 Watts in Bridge mode; 2 x 400 Watts @ 4 Ohms; 2 x 200 Watts @ 8 Ohms) and high-tech efficiency combine, giving you a supercharged workhorse

Accelerated Transient Response Delivers the Knockout Punch

It takes huge pulses of energy (current and voltage) to propel a woofer cone out fast enough to match a bass beat. That’s called Transient Response and it’s the holy grail of amp design. By carefully selecting transistors with extremely high slew rates and optimizing other proprietary parts of our circuitry, our amps are able to react instantly to even the most demanding electronic bass impulses. If the woofers in your PA system can keep up, your audience will hear a tighter, crisper, more natural sound.

Instead of operating relatively continuously like most power amps, the KM750 features rail tracking for effectively modulating the power supply rails with only the peaks of the input signal. This technology has revolutionized pro audio amp designs with its outstanding performance and efficiency.

Sublimely Simple Operation

The front panel controls and indicators provide your system’s vital signs at a glance. After pressing the Power button, the Power LED lights to show the amp is ready for action. All channels feature positive-detent Gain controls with Signal LEDs that light when a signal is present, as well as Clip LEDs that alert to reduce the input signal.

Just as elegant as the front, the rear panel is home to balanced XLR and ¼ " TRS, plus unbalanced ¼ " TS and RCA connections. Take your pick of professional locking speaker Outputs or touch-proof binding posts to securely connect speakers. The same panel contains the switches that put the KM750 in Mono, Stereo (two channel mode) or mono Bridge mode. Flick the Limiter On/Off switch to activate the built-in overload protection.

Product description

The POWERPLAY P1 Personal In-Ear Monitor (IEM) Amplifier puts control where it' most useful right at the artist' fingertips. Whether on stage or in the studio, the P1 provides performers and recording artists with a dependable and affordable personal monitoring solution. Drummer-Proof Output The P1' high-power headphone output ensures that as the band gets louder, you'll still be able to hear every nuance of your performance. And the P1' simple user interface makes it easy for everyone to dial in a perfect mix every time. Using the P1 also helps protect your hearing in two ways. First, thanks to a built-in current limiter, unexpected peaks in signal level won't get to your ears. Second, the simple act of wearing headphones or earbuds helps isolate your ears from loud stage volume of instrument amps and monitor wedges. With the P1, you can clearly hear your own performance and blend in the ideal amount of the rest of the band. The Perfect Monitor Mix Dual XLR inputs allow 2-channel, mono or stereo operation with a convenient mix function which allows you to run two sources into the P1 and dial-in exactly what you want to hear as you perform. Two simple controls, Level and Balance, help you achieve the perfect mix in an instant. The P1 lets you take control of what you hear and allows the engineer to concentrate on providing the audience the best listening experience. Plus, setup is so fast and easy, letting you concentrate on putting on the best performance when you hit the stage. Power to Last One little 9 V battery lasts up to 12 hours, so the P1 will go as long as your next show or studio recording session! Or, use the optional PSU-SB DC power supply for the ultimate in dependable power. And the P1's metal chassis is built like a tank to handle even your most- demanding and energetic performance. Small enough to hang on your belt or mount on a mic or drum stand.

• In-ear monitor amplifier for personal monitor applications
• High power and "drummer proof" headphones output
• Dual XLR inputs allow for 2-channel mono or stereo operation
• Switchable stereo/mono operation with mix function
• Level and Balance/Mix controls

User questions & answers

Question:	Will this work if you run just one xlr cable to the input? will i get sound in both ears of my in ear monitors
Answer:	51.39 Libras If your question refers to the ancient Roman Libra... 1 pound = 1.40431074 libra
Question:	Could i plug the p1 into a monitor mix (using a speakon -> male xlr cable) that's already powered via an amp? or would this blow things up
Answer:	120v
Question:	For my monitor mix, would I come from the boards AUX channel? Or should I come from a power amplifier? Looking to not blow up my new toy
Answer:	The Clip lights on the front relate to the output levels and their distortion of the the sound coming out of the amp. From the manual: "Should distortion occur, reduced the input level so that the CLIP LED stops lighting up." The Clip limiter switch on the back is related to the input level being fed to the amplifier and allow the amp to "automatically recognize distortion and lower amplification until distortion is reduced to a tolerable level." (also from the manual). It states that at moderate distortion it reduces the input level moderately, and at higher levels of distortion it reduces the audio level more. It seems to be weighted more to reduce the levels on the higher frequencies to protect tweeters (which DO tend to be more fragile) as opposed to woofers. Since I'm running mine in a three way system and the Behringer is only on the low end (~160 Hz and below) I have not engaged the input limiter using the back panel switches, but your application might benefit from that which is why I think they include that as a feature.
Question:	Can i intercept some of the vocalist microphone audio and amplify for an earpiece? My vocalists needs to hear themselves but my mixer is far a way
Answer:	It's a 2 ohm stable stereo power amplifier @ 2000 watts. It can also be bridged to mono @ a 4 ohm load. So, it sounds like it can be used in your application

Product features

Powerplay P1

The Powerplay P1 Personal In-Ear Monitor (IEM) Amplifier puts control where it’s most useful – right at the artist’s fingertips. Whether on stage or in the studio, the P1 provides performers and recording artists with a dependable and affordable personal monitoring solution.

Drummer-Proof Output

The P1’s high-power headphone output ensures that as the band gets louder, you’ll still be able to hear every nuance of your performance. And the P1’s simple user interface makes it easy for everyone to dial in a perfect mix every time.

Using the P1 also helps protect your hearing in two ways. First, thanks to a built-in current limiter, unexpected peaks in signal level won't get to your ears. Second, the simple act of wearing headphones or earbuds helps isolate your ears from loud stage volume of instrument amps and monitor wedges. With the P1, you can clearly hear your own performance and blend in the ideal amount of the rest of the band.

The Perfect Monitor Mix

Dual XLR inputs allow 2-channel, mono or stereo operation with a convenient mix function which allows you to run two sources into the P1 and dial-in exactly what you want to hear as you perform. Two simple controls, Level and Balance, help you achieve the perfect mix in an instant. The P1 lets you take control of what you hear and allows the engineer to concentrate on providing the audience the best listening experience. Plus, setup is so fast and easy, letting you concentrate on putting on the best performance when you hit the stage.

Power to Last

One little 9 V battery lasts up to 12 hours, so the P1 will go as long as your next show or studio recording session! Or, use the optional PSU-SB DC power supply for the ultimate in dependable power. And the P1's metal chassis is built like a tank to handle even your most-demanding and energetic performance. Small enough to hang on your belt – or mount on a mic or drum stand, the P1 puts complete balance and volume control in your hands.

More Power to You

With rock solid monitoring, your performance naturally will be at the top of your game. Get the power to hear what you want to hear – with the Powerplay P1. The whole band will thank you!