11 best behringer mp3 players

Product description

High-Power 1000-Watt 2-way PA sound reinforcement speaker system for live and playback applications

• High-Power 1000-Watt 2-way PA sound reinforcement speaker system for live and playback applications
• Ultra-compact and lightweight system delivers excellent sound even at extreme sound pressure levels
• High-performance MP3 player included to play audio files via USB stick
• "Wireless-ready" for high-quality BEHRINGER digital wireless system (not included)
• 2-channel mixer with individual Mic/Line inputs, Volume controls and Clip LEDs

User questions & answers

Question:	Is there a way to control remotely the mp3 player? i tried connecting an mp3 player to the usb port, but i can only play the songs from the PA
Answer:	shure you can, just nead a 3.5 to 1/4 mono cable male or 3.5 to 3.5 male and adaptor to 1/4 mono
Question:	can I plug my Ipad or laptop to play and what kind of wire do I need
Answer:	If you want to run a stereo setup, you're going to have to run from your source with two cables. Depending on what your source audio is, (mp3 player, mixing console, cd or, some other other player ),you will need to use audio cables that terminate with 1/4 inch mono plugs on the speaker side, and the source side must have the male plug ,or plugs, necessary to connect to the audio source player. Hope this helps.
Question:	What cable do I need to connect two of these speakers for stereo sound
Answer:	No
Question:	i live in europe, so does it support 230V
Answer:	Sorry, I have not used the USB mic.

Product description

The ultra-compact XENYX QX602MP3 2-bus mixers six Inputs (2 mic, 2 stereo) allow you to effortlessly achieve premium-quality sound, thanks to its two onboard studio-grade XENYX Mic Preamps with available Phantom Power, and ultra-musical British channel EQs



Add to this a high-performance MP3 player for accessing audio files from a USB stick, and a built-in 24-bit, stereo multi-FX processor with presets for studio-class reverb and delay, and the QX602MP3 becomes an incredibly versatile and amazingly affordable mixer

• The ultra-compact XENYX QX602MP3 2-bus mixers six Inputs (2 mic, 2 stereo) allow you to effortlessly achieve premium-quality sound, thanks to its two onboard studio-grade XENYX Mic Preamps with available Phantom Power, and ultra-musical British channel EQs
• Add to this a high-performance MP3 player for accessing audio files from a USB stick, and a built-in 24-bit, stereo multi-FX processor with presets for studio-class reverb and delay, and the QX602MP3 becomes an incredibly versatile and amazingly affordable mixer
• Sonically Superior Mic PreampsThe XENYX QX602MP3 gets its name from our legendary, high headroom XENYX mic preamps, which have been praised by audio engineers all over the world
• These state-of-the-art mic pres represent a major step in the evolution of audio technology and they can easily hold their own, even when compared to the most expensive stand-alone mic preamps
• XENYX preamps offer a staggering 130 dB of dynamic range, with a bandwidth that extends from below 10 Hz to well above 200 kHz

User questions & answers

Question:	Does this work without an amplifier
Answer:	No, it doesn’t!
Question:	Does this work without an amplifier
Answer:	Yes it does, but I used powered speakers, so I didn’t need an amplifier.

Product description

Multi-purpose, 150-Watt, active speaker for vocal and keyboard monitoring, multi-media, press conferences and home recording studio, etc.

• Multi-purpose, 150-Watt, active speaker for vocal and keyboard monitoring, multi-media, press conferences and home recording studio, etc.
• High-performance MP3 player included to play audio files via USB stick
• Revolutionary Class-D amplifier technology: enormous power, incredible sonic performance and super-lightweight
• 6.5” premium-quality, full-range driver for excellent sound performance
• Ultra-low noise 4-channel mixer with 3-band EQ

User questions & answers

Question:	Has anyone tried using a USB mic with this
Answer:	Yes and no. We've used it for vocals in a band that did many different formats. More as a monitor than a amp though. It's loud, but it's not massively loud.
Question:	Has anyone used this for vocals in an R&B band and if so how did it perform
Answer:	Yes, standard power cord like a desktop computer or any other piece of sound equipment (3 prong grounded). You can play audio with a flash drive through the USB plug OR you can plug an mp3 player (or laptop, phone, etc) into the "CD INPUT" using a 3.5mm to stereo rca cable (http://www.amazon.com/s/ref=nb_sb_noss_1?url=search-alias%3Daps&field-keywords=3.5mm+to+rca&rh=i%3Aaps%2Ck%3A3.5mm+to+rca)Hope that helps! It's a nice speaker (best of all it's super portable). You can also save a few bucks and buy the Behringer EUROLIVE B205D. It's the same 150 watts only in a 5.5inch speaker, no usb input (if you don't plan on using that!) and 2 XLR-1/4" inputs instead of 3.
Question:	Does this have a standard power cord that plugs into the wall? Can you hook an external mp3 player up to it easily? HOw is that done
Answer:	I checked both guitar center and amazon. make sure to check the warranty prices
Question:	How do I buy it
Answer:	Yes. You need the patch chords that should come with it. We transferred it easily to the TV.

Product description

The ultra-compact XENYX QX602MP3 2-bus mixers six Inputs (2 mic 2 stereo) allow you to effortlessly achieve premium-quality sound thanks to its two onboard studio-grade XENYX Mic Preamps with available Phantom Power and ultra-musical British channel EQs

• The Ultra-Compact Xenyx Qx602Mp3 2-Bus Mixers Six Inputs (2 Mic 2 Stereo) Allow You To Effortlessly Achieve Premium-Quality Sound Thanks To Its Two Onboard Studio-Grade Xenyx Mic Preamps With Available Phantom Power
• Add To This A High-Performance Mp3 Player For Accessing Audio Files From A Usb Stick And A Built-In 24-Bit Stereo Multi-Fx Processor With Presets For Studio-Class Reverb And Delay And The Qx602Mp3 Becomes An Incredibly Versatile
• Sonically Superior Mic Preampsthe Xenyx Qx602Mp3 Gets Its Name From Our Legendary High Headroom Xenyx Mic Preamps Which Have Been Praised By Audio Engineers All Over The World
• These State-Of-The-Art Mic Pres Represent A Major Step In The Evolution Of Audio Technology And They Can Easily Hold Their Own Even When Compared To The Most Expensive Stand-Alone Mic Preamps
• Xenyx Preamps Offer A Staggering 130 Db Of Dynamic Range With A Bandwidth That Extends From Below 10 Hz To Well Above 200 Khz

User questions & answers

Question:	What can you play through this amp? I need 2 mics, plus guitar or CD player at the same time
Answer:	You can definitely play 2 mics. I would suggest you connect your Guitar cable through DI box and XLR cable to the third mic input. DI box is fairly cheap and concerts unbalanced signal to balanced signal. Finally the CD player can be connected to to the RCA connections via 1/8" stereo to RCA cable. Thus you can accomplish all connections you specified without any problem.
Question:	Does the speaker have any vocal enhancement settings like echo or reverb
Answer:	No, there are no effects. Just EQ.
Question:	Are the 3 mic plugins (shown) able to plug XLRs into
Answer:	Yes!

Product description

BEHRINGER PMP500MP3 Ultra-Compact 500-Watt 8-Channel Powered Mixer with MP3 Player, Reverb and Wireless Option

• Ultra-compact 500 Watt 8-channel powered mixer
• Enormous power, incredible sonic performance, and super-lightweight
• High-performance MP3 player included to play audio files via USB stick
• Studio-grade stereo reverb adds finishing touch to your sound
• "Wireless-ready" for high-quality BEHRINGER digital wireless system (not included)

User questions & answers

Question:	Can this be made to recieve bluetooth
Answer:	Probably yes but i did not test it for bluettoth use. You should try to use a bluetooth car stereo adapter: https://www.amazon.com/s/ref=nb_sb_noss_1?url=search-alias%3Daps&field-keywords=bluetooth+car+stereo+adapter&rh=i%3Aaps%2Ck%3Abluetooth+car+stereo+adapter You will need also a mini plug to male stereo 1/4 inch adapter: https://www.amazon.com/s/ref=nb_sb_noss?url=search-alias%3Daps&field-keywords=mini+plug+to+male+stereo+1%2F4+inch+adapter&rh=i%3Aaps%2Ck%3Amini+plug+to+male+stereo+1%2F4+inch+adapter
Question:	I can't find ohms anywhere. is this 500 watts @ 8 ohms? 4 ohms? 2 ohms
Answer:	The manual says 250 Watts per side Max with no reference to the resistance of the speakers. I'd guess 8 ohms, but I would check the manufacturer's website and ask them directly. It doesn't make sense that they wouldn't reference this in a user's manual. I run it into a single 8 ohm speaker for low volume rehearsal so power is never an issue.
Question:	What is the minimum load output (ohms) for this amp? Thanks - Terry Are the two output channels separate
Answer:	We had load issues with the first one of these we bought (not on Amazon). We blew the first one up twice. They rate this at 200 watts per channel, but I think this is built to play acoustic guitar and vocals in a small space. We are using their system that is rated at 1000 watts per channel which works great in clubs and larger venues.
Question:	Where can i find the stand for the behringer pmp500mp
Answer:	My pmp500mp3 came with a small adapter to use it with a "standard" stand.

Product description

Ultra-compact 50-watt PA/monitor speaker with MP3 player and Bluetooth Audio Streaming.

• Multi-purpose, 50-watt speaker for vocal and keyboard monitoring, multi-media, press conferences and home recording studio, etc
• MP3 player included to play audio files via USB sticks
• Connect your iPod*, iPhone*, iPad* or any other audio-streaming device via Bluetooth
• Ultra-low noise 3-Channel mixer with 3-band EQ
• Revolutionary Class-D amplifier technology: enormous power, incredible sonic performance and super-light weight

Product features

B105D

Ultra-Compact 50-Watt PA/Monitor Speaker with MP3 Player and Bluetooth Audio Streaming

• Multi-purpose, 50-Watt speaker for vocal and keyboard monitoring, multi-media, press conferences and home recording studio, etc.
• Revolutionary Class-D amplifier technology: enormous power, incredible sonic performance and super-light weight
• 2 "Invisible" Mic Preamps,1 Mic preamp with phantom power for condenser microphones and 1 instrument-ready input (no DI required)

Muli-purpose Speaker with MP3 and Bluetooth

Behringer B105D is a fantastic multi-purpose, 50-Watt speaker for vocal and keyboard monitoring, multi-media, press conferences and home recording studio use. Feel free to connect your iPod*, iPhone*, iPad* or any other audio-streaming device via Bluetooth for great sound.

Class-D amp and Super Light-Weight

Revolutionary Class-D amplifier technology provides enormous power, incredible sonic performance while also being super lightweight. With a 5" premium-quality and full-range driver, this product has ultra-low noise 3-channel mixer with 3-band EQ. 2 “Invisible” Mic Preamps comes with phantom power for condenser microphones and 1 instrument ready input.

Various inputs for keyboards and Mic use

Product contains a dedicated stereo input for keyboards, MP3, CD, and a Mic stand integration system for use with stand. In addition, it comes loaded with internal switch-mode power supply for noise-free audio, superior transient response and very low power consumption. Overall, this speaker is super-tough and have impact-resistant enclosure with integrated top carry handle great for a wide range of uses.

Product description

• High-definition bass and super-transparent highs
• Ultra-high dynamic range
• High-efficiency cobalt capsule
• Single-sided coiled cord with oxygen-free copper wires
• Round swiveling ear cups

User questions & answers

Question:	are these headphones wired or do they have a removeable wire
Answer:	If your old amp draws the same power then you'll be fine. If its larger than your pervious amp then absolutely!

Product description

• Professional, 7-channel, ultra-low noise DJ mixer with state-of-the-art phono preamps

User questions & answers

Question:	Hey ...does any 1 know what size Mixer box this mixer uses for desk top usage
Answer:	The mixer is slanted so I purchased: (https://www.bhphotovideo.com/c/product/585320-REG/Marathon_MA_M806E_MA_M806E_Flight_Ready.html) to house mine and it fits perfect. The specs of the mixer in the description is 100% accurate. 19" W x 6.25" H x Mixer (14.5") but needs to be larger to plug in jacks in the back.
Question:	Is this mixer dual voltage
Answer:	Yes it is .100 to 240v
Question:	will this 17.3" fit into a top slanted rack case which is
Answer:	With the rack ears mounted on the mixer, it will fit into a 19" rack. Great mixer BTW.
Question:	I can connect this mixing console to a onkyo receiver
Answer:	This was purchased as part of a sound system for a dance studio. I had a professional audio/video company install mine along with other equipment. I bought Behringer Pro Mixer at their recommendation, and it works beautifully for our needs.

Product description

The UCA202 provides two analog mono inputs and outputs (for monitoring), USB connectivity and an additional S/PDIF optical output for direct analog-to-digital conversion. The stereo headphone output features a dedicated level control and lets you listen to both the input and output. For a fraction of the cost of many USB audio interfaces, you can have state-of-the-art digital conversion, world-class recording and editing software, and hassle-free connectivity between your PC or Mac Computer and any piece of audio equipment.

Hassle-free connectivity between your PC or Mac Computer and any piece of audio equipment. Click to enlarge.

energyXT2 makes it easy to manipulate your audio and MIDI file.

Audacity is an easy-to-use audio editor and recorder for Windows, Mac OS X, and Linux operating systems.

Options Galore

When used as a professional interface between a mixing console and your computer, myriad options become available. Some of these might include connecting the UCA202 RCA outputs: to the TAPE INPUT jacks of your mixer; to powered monitors or to the input channels on the mixer. Connecting to the mixer input channels allows you to use the Aux Send feature of your mixer to build an extremely versatile monitor mix for recording sessions. These are just a few of the possibilities; let us know how you use your UCA202.

No Drivers Required

The UCA202 works with your PC or Mac computer without the need for any setup or driver installation.

Powered via USB

Because the UCA202 is powered by the USB bus, no external power supply is needed. That's one more outlet for all your musical toys.

High-End Audio Quality

The UCA202 features high-resolution 48 kHz converters for high-end audio quality, and the additional S/PDIF optical output allows for direct digital conversion.

Tons of Free Software

Behringer provides a heap of free software available via download, to let you get the most out of your UAC202 right out of the box.

• KRISTAL Audio Engine
  
  KRISTAL Audio Engine is a powerful multi-track recorder, audio sequencer and mixer--ideal for anyone getting started with recording, mixing and mastering digital audio.
• Audacity
  
  Audacity is an easy-to-use audio editor and recorder for Windows, Mac OS X, and Linux operating systems.
• energyXT2
  
  This amazing DAW (digital audio workstation) makes it easy to manipulate your audio and MIDI files, and turn song ideas into stunning CD or web-ready recordings. energyXT2 includes built-in synthesizers, a drum machine, and internal multi-FX processor.

What's in the Box

Behringer UCA202 U-Control Audio Interface, User's Manual

• Ultra-flexible audio interface connects your instruments, mixer, etc. with your computer for recording and playback

User questions & answers

Question:	tv has no audio out but has usb. Will this work
Answer:	You can use it as either. It has Left and Right 1/4 and XLR outputs for stand-alone, and a USB cable if you want to connect it to your computer. Keep in mind, if you do connect it to your computer it will only output a stereo track (2 tracks)
Question:	ASIO Driver
Answer:	I haven't tried it but I don't think it will work. It's made for PC and Android systems. I'm pretty sure the Xbox and ps3 won't recognize it as an input device.
Question:	I want to digitize reel to reel recordings and vinyl LP records. Will this work to input the sound to my laptop
Answer:	The signal strength is great. No direct line of sight necessary. U can actually control the TV box perfectly from another room.
Question:	bit
Answer:	Yes u can use it for quick typing on Ps4, it's not a pc keyboard which would be better fit 2 hand use like a pc keyboard, but if you're like me I prefer this small one it Also don't require a lot of table space like a full keyboard.

Product features

U-CONTROL UCA202

Imagine the Possibilities…

When used as a professional interface between a mixing console and your computer, myriad options become available. Some of these might include connecting the UCA202 RCA Outputs to the Tape Input jacks of your mixer or to your powered monitors. Connecting to the mixer input channels allows you to use your mixer’s Aux Send feature to build an extremely versatile monitor mix for recording sessions.

Tons of Free Software

To truly get the most out of your UCA202, you will need recording and editing software. So, we made it easy, providing a single place for you to download lots of free software including: Audacity is an easy-to-use audio editor and recorder for Windows, Mac OS X and Linux operating systems. With Audacity you can: Record live audio Convert tapes and records into digital recordings or CDs Edit Ogg Vorbis, MP3, WAV or AIFF sound files Cut, copy, splice or mix sounds together Change the speed or pitch of a recording And much more…

Compose. Record. Mix. Share.

Tracktion is one of the world’s fastest and easiest Digital Audio Workstations (DAW) for composing, recording, editing, mixing and sharing your music with the world. Featuring a single-screen interface, and pushing the envelope in design elegance, Tracktion brings together outstanding Pro DAW features, such as dynamic automation, unlimited track count, MIDI recording and support for VST and AU plug-ins. This powerful music production software gives you all the tools of an entire professional-grade recording studio. Learning a DAW has never been easier, thanks to their vast and readily available library of resources.

Value

For a mere fraction of the cost of an USB audio interface from other brands, you can have state-of- the-art digital conversion, world-class recording and editing software and hassle-free connectivity between your PC or Mac Computer and any piece of audio equipment. Bridging the gap between your music and the rest of the world—the Behringer U-CONTROL UCA202. Check one out at your local dealer today!

Product description

Looking for a simple, affordable way to get your music into the digital realm? Or maybe you'd like to connect your computer to an external effects unit or recorder? Want to transfer your old cassette tapes to CD before the oxide falls off the tape? The fastest, easiest way to get analog audio into your computer is with the U-CONTROL UCA222 Audio Interface.

The fastest, easiest way to get analog audio into your computer. Click to enlarge.

S/PDIF optical output and headphone out with volume control.

Includes software such as XT Software's energyXT for recording right out of the box.

PC and Mac Ready

This ultra-compact, USB-powered device lets you connect your PC or Mac computer to virtually any piece of audio gear. It gets its power from your computer's USB bus, so no external power supply or batteries are required. And the UCA222 requires no special setup or drivers--just plug it in to a free USB port and start recording.

Versatility

The UCA222 features two analog mono inputs for connecting any line-level device, such as a mixer or tape deck, and two analog mono outputs for connecting active speakers or studio monitors. On the digital side, the UCA222 provides USB connectivity and an additional S/PDIF optical output for direct analog-to-digital conversion. The stereo headphone output has a dedicated level control and allows you listen to either the input source or the computer output.

Plenty of Options

When used as a professional interface between a mixing console and your computer, myriad options become available. Some of these might include connecting the UCA222's RCA outputs to the TAPE INPUT jacks of your mixer or active monitors, or directly into the input channels of the mixer. Connecting to mixer input channels gives you access to equalization and allows you to use the AUX Send features of your mixer to build extremely versatile monitor mixes for your recording sessions.

Tons of Free Software

Because you'll want to take full advantage of the UCA222's podcasting and recording potential we've included a massive software package including Audacity, Podifier, Juice, Podnova and Golden Ear. You're ready to go live on your Mac or PC computer right out of the box! You also get more than 100 virtual instruments and over 50 effects plug-ins, turning your computer into a complete home-based or mobile recording studio from input to output.

When you're ready to take your recording projects to the next level, XT Software's energyXT is just the trick. This amazing DAW (digital audio workstation) makes it easy to manipulate your audio and MIDI files, turning song ideas into stunning CD or web-ready recordings. energyXT includes its own multi-FX processor, built-in synthesizers and a drum machine, both of which can be accessed directly via an external controller (such as our UMA25S or UMX25) or programmed in step-write mode.

Great Value

For a fraction of the cost of other USB audio interfaces, you can have state-of-the-art digital conversion, world-class recording and editing software, and hassle-free connectivity between your PC or Mac Computer and any piece of audio gear.

What's in the Box

U-CONTROL UCA222 Audio Interface,  User's Manual

• Ultra-flexible audio interface connects your instruments, mixer, etc. with your computer for recording and playback
• Compact music production software included with feature-rich audio/MIDI sequencer that loads almost instantaneously on all computer platforms
• Massive software bundle includes Audacity audio editor, comprehensive podcasting software and over 150 virtual instruments and effect plug-ins
• Works with your PC or Mac computer - no setup or drivers required
• Stereo Headphone output with dedicated Level control lets you monitor both input and output
• Revolutionary energyXT2.5 Compact music production software included with feature-rich audio/MIDI sequencer
• Bundle includes Audacity audio editor, comprehensive podcasting software and over 150 virtual instruments and effect plug-ins

User questions & answers

Question:	Will this device be able to take a stereo signal, have it processed by a linux machine and then output the modified stereo signal to it's RCA outputs
Answer:	If the device is plugged into the linux machine via the USB cable, it will do this for you. With this hookup, it will produce a 2 way signal, even simultaneously, 1 going into the computer, 1 coming out from the computer. If need be, it’s even capable of looping an output signal back in, say to a recording app on your computer. Just make sure you flip the little black monitor switch to the off position to eliminate distortion, and the signal looping back in will be crystal clear and strong.
Question:	Do I need to buy a separate cable to use this product? I'm not really sure how the I/O system works. Can someone explain? Thanks
Answer:	Not sure of your intended use for this product.I bought the UCA222 because the earphone jack on my Dell laptop went bad. It worked really well for my needs, it has a USB plug that connects to the standard USB port on my laptop. Then I connect my earphones to a standard plug on the device. No other cable required for me.
Question:	Can you connect to a USB power supply and use the analog to S/PDIF output
Answer:	I don't know about the S/PDIF but I suspect it won't work very well. I tried using the analog in to headphone jack using a USB power supply and it sounded terrible. I thought it would be a way around having to use a computer and it didn't work. Once I plugged the UCA222 into a laptop instead of a power supply it sounded way better.
Question:	Can I connect 5 of these to get 10 independent audio output channels generated by the computer via usb
Answer:	There's nothing technically preventing you from connecting 5 of these to get 10 independent audio outputs. If your software supports it, your computer will just see them as 5 individual audio cards. The problem your likely to run into is your computer does have a limit on how many USB devices can function simultaneously (USB Bandwidth). One way around this problem is to use a Quad USB PCI Card, that has 4 USB port and each one in it's own controller. The next thing you will need to consider is how many PCI lanes you have (will determine how many USB controllers your PCI bus can support) Hope this helps.

Product features

U-CONTROL UCA222

The U-CONTROL UCA222 allows you to connect instruments and other audio devices to your computer, effectively merging the analog and digital worlds.

It accomplishes this by providing two analog mono Inputs and Outputs (for monitoring), USB connectivity and an additional S/PDIF optical output. The stereo headphone output features a dedicated level control and lets you listen to both the input and output. We even give you all the software you’ll need to get started!

Tons of Free Software

To truly get the most out of your UCA222, you will need recording and editing software. So, we made it easy, providing a single place for you to download lots of free software including: Audacity is an easy-to-use audio editor and recorder for Windows, Mac OS X and Linux operating systems. With Audacity you can: - Record live audio -Convert tapes and records into digital recordings or CDs - Edit Ogg Vorbis, MP3, WAV or AIFF sound files - Cut, copy, splice or mix sounds together - Change the speed or pitch of a recording - And much more.

Imagine the Possibilities

When used as a professional interface between a mixing console and your computer, myriad options become available. Some of these might include connecting the UCA222 RCA Outputs to the Tape Input jacks of your mixer or to your powered monitors. Connecting to the mixer input channels allows you to use your mixer’s Aux Send feature to build an extremely-versatile monitor mix for recording sessions.

Compose. Record. Mix. Share

Tracktion is one of the world’s fastest and easiest Digital Audio Workstations (DAW) for composing, recording, editing, mixing and sharing your music with the world. Featuring a single-screen interface, and pushing the envelope in design elegance, Tracktion brings together outstanding Pro DAW features, such as dynamic automation, unlimited track count, MIDI recording and support for VST and AU plug-ins. This powerful music production software gives you all the tools of an entire professional grade recording studio. Learning a DAW has never been easier, thanks to their vast and readily available library of resources.

Value

For a mere fraction of the cost of an over-priced USB audio interface from those other guys, you can have state-of-the-art digital conversion, world-class recording and editing software and hassle-free connectivity between your PC or Mac Computer and any piece of audio equipment.

Bridging the gap between your music and the rest of the world – the U-Control UCA222. Check one out at your local Behringer dealer, or place your order online today.

Product description

BEHRINGER DIGITAL PRO MIXER DDM4000: Ultimate 5-Channel Digital DJ Mixer with Sampler, 4 FX Sections, Dual BPM Counters and MIDI. 32-bit digital DJ mixer with beat-synchronized sampler, 4 multi-FX sections, 2 BPM counters, digital crossfader and MIDI. 4 Phono/Line stereo channels allowing up to 8 signal sources to be connected simultaneously. 2 microphone inputs with Gain, EQ, Talk function and FX. 4 stereo channels with Gain, programmable parametric 3-band EQ with Kill function, fader curve control and flexible crossfader assignment. Fully featured MIDI controller for your DJ software. Sophisticated sampler with beat-controlled loop function, real-time pitch control, sampler FX and crossfader start option. 2 freely assignable and BPM-synchronized, high-quality FX engines (Bitcrusher, Resonator, Reverb, Flanger, etc.). Ultra-fast, and accurate BPM counters for automatic BPM synchronization of sampler, FX, crossfader and external drum machines, etc. via MIDI. Digital crossfader with flexible curve adjustment, reverse button and automatic, BPM-synchronized crossfading. Dual-mode crossfader with innovative frequency-selective crossfading. Dedicated headphones section includes PFL mix/split and bass/snare boost function. Recall your last mixer setting at the push of a button. Digital S/PDIF output for direct recording of your performance. Rack mount brackets included for ultimate flexibility. High-quality components and exceptionally rugged construction ensure long life. The DDM4000 provides top-level functionality for the experienced DJ, at a cost that will have you smiling all the way to the bank. Grab yourself a DDM4000 from your nearest authorized BEHRINGER dealer and start spinning sets that will catapult you directly to star status! Conceived and designed by BEHRINGER Germany. Please contact the Customer CARE department for any technical issues at 702-800-8290.

The DDM4000 is a state-of-the-art 32-bit digital DJ mixer, jam-packed with creative tools, yet its intuitive layout will let you feel at home in an instant. Editing, storing and recalling your settings is simply a breeze! Hook up your turntables and CD/MP3 players to its 4 stereo channels, each with fully programmable EQ and Kill switches. Put ultimate versatility at your fingertips with fully programmable beat-sync'able multi-FX modules, a pair of high-precision BPM counters and a digital crossfader with custom curve adjustment. And the super-cool BPM-sync'd sampler with real-time pitch control, loop and reverse functions will make your crowd go wild.

A state-of-the-art 32-bit digital DJ mixer jam-packed with creative tools. Click to enlarge.

Digital crossfader with flexible curve adjustment, reverse button and automatic, BPM-synchronized crossfading.

Two freely assignable and BPM-synchronized, high-quality FX engine.

Choose Your Channel

The DDM4000 struts 5 independent channels. Channels 1-4 are crossfader-assignable stereo channels, suitable for both vinyl and CD decks, and have appropriate phono/line level toggle switches at the input. All channels feature 3-band digital EQs with up to 12 dB of boost and infinite cut option, or "kill." Any channel can be monitored directly via headphones thanks to the PFL switch above the fader.

A dedicated Mic channel is provided in mono, with 2 XLR mic inputs. The vocal channel features a special "talk" feature that attenuates the volume of the other 4 channels, ensuring you will be heard over the music. The Mic channel also has its own FX section that can be applied with a single button.

Cross My Heart

The core functionality of any DJ mixer lays in its crossfader. The DDM4000's crossfader can be assigned to any of channels 1-4, and sports a 3-band EQ kill button on either side. The curve sensitivity of the crossfader is adjustable, and in the unlikely event that you wear it out, the crossfader itself is replaceable.

Step Up Your Sampling

The DDM4000's BPM-synced sampler is a sought-after addition. The sampler allows you to record a segment of incoming audio and loop it continuously without dropping the beat. Once your track is looping from the sampler, you can swap discs and queue up new tracks and mix them back in. The transition is seamless!

Effects

The DDM4000 features a stunning dual FX section that includes our patented BPM counting technology. This allows the mixer to read/display the BPM of 2 different inputs and to apply BPM-synchronized effects, such as an echo synced to the beat of the music. Effects such as bitcrusher, reverb, delay, pitch shift, and more are available, and can be assigned independently to multiple channels.

The DDM4000 is ideal for a club owner who has multiple working DJs performing on a recurring basis. User preferences like fader curve, FX settings, EQ, kill frequencies, etc., can all be set to various user accounts and recalled instantly. This feature can eliminate setup time between DJs altogether!

Swimming Upstream

When you combine the DDM4000's digital operation with MIDI functionality, the door to creative applications opens REALLY wide. For example, the mixer can be used as a MIDI controller for your favorite DJ software--or whatever else you like! Channel faders, EQ knobs, and button presses can all be configured to send customized MIDI data. The possibilities here are quite endless.

What's in the Box

Behringer DDM4000, Power Cable, Rack Mount Brackets, User's Manual

• 32-bit digital DJ mixer with beat-synchronized sampler, 4 multi-FX sections, 2 BPM counters, digital crossfader and MIDI
• 4 Phono/Line stereo channels allowing up to 8 signal sources to be connected simultaneously
• 2 microphone inputs with Gain, EQ, Talk function and FX
• 4 stereo channels with Gain, programmable parametric 3-band EQ with Kill function, fader curve control and flexible crossfader assignment
• Fully featured MIDI controller for your DJ software

User questions & answers

Question:	Is this compatable with self powered behringer dj speakers
Answer:	This mixer can store 2 samples (There are 2 banks for storing). The length of the sample can be between 1 and 16 beats. Or you can choose "Endless recording": in this case you will choose the length of the sample. I don't know what is the maximum length in seconds (I never tried to go to the limit), but because it says endless recording and this is a sample you want and not a full song to be recorded, it should not be an issue.
Question:	Does this mixer come with Traktor software
Answer:	Yes you can, whatever you are using As a MIDI you may need to go online and find the mapping for it, or you can map whatever the media is yourself, Google should be a great help on step by step setup
Question:	How many seconds of sample can this mixer store at a time
Answer:	It is my belief that this should work on all Chauvet Hurricanes. I use it with my 1300 and it works great! I wouldn't use any other juice with my machine!
Question:	can i use midi and analog at the same time? e.g. using channels 1 & 2 for computer and say 3 & 4 for cdjs
Answer:	Yes, it will but depends on how many watts your fog machine is rated for, mine is 900 watts and works great on a 30x40 x 14 ft walls, just buy the Chauvet 900 watts fog machine and you will not regrade

Product features

Choose Your Channel

The DDM4000 features 5 independent channels. Channels 1 - 4 are crossfader-assignable stereo channels, with Phono/Line Level toggle switches that make them suitable for your vinyl and CD/mp3 players. All channels feature 3-band digital EQs with up to 12 dB of boost and infinite cut option (Kill), and can be monitored directly via headphones thanks to the PFL switch above the fader. A dedicated Mic channel is provided in mono, with 2 XLR Mic Inputs and features a special Talk feature that attenuates the volume of the stereo channels (ducking), ensuring your announcements will be heard loud and clear over the music. The Mic channel also has its own FX section – which can be applied with a single button.

Crossfader

The core functionality of the DDM4000 can be found in its Digital Ultracurve Crossfader, which is equipped with Reverse Tap and Hold buttons, plus automatic BPMsynchronized crossfading. Smooth and ultra-responsive, this First-Class Crossfader can be assigned to any of channels 1 - 4, and sports a trio of 3-band EQ Kill buttons on either side. The curve sensitivity is adjustable, and in the unlikely event you ever wear it out, the Crossfader itself is easy to replace.

Step Up Your Sampling

DDM4000’s BPM-synced sampler is a highly sought-after feature, which allows you to record a segment of incoming audio and loop it continuously – without dropping the beat. Once your track is looping from the sampler, you can swap discs, queue up your new tracks and mix them back in – for totally seamless transitions!

Own the Night!

The DDM4000 is the ideal digital mixer for the DJ who is on the way to the top, or the club owner who has multiple DJs performing on a recurring basis. All preferences, such as fader curve, FX settings, EQ, Kill frequencies, etc., can be stored in individual user accounts and recalled instantly. This feature alone can completely eliminate the changeover time between DJs – so the party never stops! With the amazing DDM4000 in the hands of an experienced DJ, at a cost that will have you smiling all the way to the bank – you truly can own the night!

Compose. Record. Mix. Share.

Tracktion is one of the world’s fastest and easiest Digital Audio Workstations (DAW) for composing, recording, editing, mixing and sharing your music with the world. Featuring a single-screen interface, and pushing the envelope in design elegance, Tracktion brings together outstanding Pro DAW features, such as dynamic automation, unlimited track count, MIDI recording and support for VST and AU plug-ins. This powerful music production software gives you all the tools of an entire professional-grade recording studio. Learning a DAW has never been easier, thanks to their vast and readily available library of resources.