12 best 3m flutes

Product description

Our Pneumatic 3M pistol grip tools are designed with operator comfort in mind and are ideal for intermittent use on non-production spot sanding and finishing applications as well as paint prep and weld burn clean-up.

• Powerful lightweight tools primarily intended for use in the automotive aftermarket and ideal for intermittent use on light duty spot sanding and finishing applications
• Pistol grip design allows sanding hard-to-reach areas such as those found in door jambs, bumpers, and headlight lenses with ease
• Durable composite body feels good in the hand and has less potential to mar if bumped against the work surface

Product description

3M finesse-it Polish - Purple is part of a line of specially designed compounds and polishes to be used on OEM and baked refinish paints to remove sand scratches or to remove swirl marks from previously compounded areas and is designed to produce best results when used with an air or electric buffer equipped with 3M finesse-it buffing pads.

• Removes swirl marks and micro grade sanding scratches
• Ideal for spot repair on oem clear coats
• Wax and silicone free formula
• Unit count: 1.0

Product description

3M Cubitron II Hookit clean sanding film disc 775L features 3M precision shaped ceramic grain, a revolutionary advancement in abrasive technology. The triangular shaped ceramic mineral is designed to slice through the substrate, rather than Gouging or “plowing” like conventional abrasives, resulting in a disc that cuts up to 2x as fast and lasts up to 6x as long as conventional abrasives.

• Revolutionary 3M precision shaped grain technology provides fast cut and long life
• Cuts up to 2X as fast as conventional abrasives
• Film backing for greater tear resistance and edge retention
• Ideal for a wide variety of substrates and applications focused primarily on stock removal
• Hook and loop attachment makes disc changes fast and easy

User questions & answers

Question:	How man discs of each grit are in this pack
Answer:	Okay, so I have had to drink Activated Charcoal in the hospital and I learned a lot! I would never use a capsule meant to be swallowed to make a toothpaste for my teeth. For teeth, I would buy a Charcoal toothpaste. The way this works is as it says but there is a bit more to it. It is not necessarily bad but you have to be careful. Activated charcoal is used to remove "toxins" from the body so they are not absorbed causing damage to your organs. However, even if you are a thin person, Activated Charcoal can also remove fat from the body (although it would not be recommended for weight loss for reasons I will explain later) and cause you to lose some weight. As you could see, they warn you about the possibility of effecting the absorption of medications so it should be taken 3-4 hours after eating. However, if you are taking an extended release medication, this could absorb some of that which would make it less effective. Activated charcoal does not just suck the "bad" stuff out of the body, it can also stop the absorption of vitamins and minerals that we need. It can even leech calcium out of bones, probiotics out of the intestines, and biotin used in the formation of healthy hair. Don't get me wrong. I am NOT saying that people should stop buying this. I am just saying that you should always follow the directions on the bottle and speaking with a doctor first may be a good idea. If you are not going to see your doctor, you should definitely be careful about taking this and make sure you eat right and, unless you eat perfectly everyday, you should probably take a multi-vitamin. Remember that while the capsule is meant to swallow, toothpaste usually isn't, and for a good reason. This also means that using what is in the capsule, might not be good for your teeth.
Question:	The 3m cubitron ii hookit clean sanding film discs 775l multi pack shows a hole pattern on the box. discs inside had no holes. is this common
Answer:	I contacted The manufacturer. The capsules used in this product are derived from bovine (beef) and porcine (pork).

Product features

3M Cubitron II Hookit Clean Sanding Film Disc 775L

3M Cubitron II Hookit Clean Sanding Film Disc 775L features 3M Precision Shaped Ceramic Grain, a revolutionary advancement in abrasive technology. The triangular shaped ceramic mineral is designed to slice through the substrate, rather than gouging or 'plowing' like conventional abrasives, resulting in a disc that cuts up to 2x as fast and lasts up to 6x as long as conventional abrasives. Revolutionary 3M Precision Shaped Grain technology provides fast cut and long life

Tackle a Variety of Substrates

These discs are ideal for a broad range of applications focused primarily on stock removal, and are effective on a wide variety of substrates, including metals, composites, gelcoat, and whitewood. The film backing offers greater tear resistance than paper discs, for additional durability and edge retention. For best results, pair with 3M Elite Random Orbital Sanders.

Hookit Disc for Easy Tool Attachment

3M offers a complete line of hook-and-loop style 3M Hookit discs for work spaces where adhesive backed discs may become contaminated by dust or dirt. They are often used in applications where a 3M Stikit disc may be too aggressive, as Hookit discs tend to leave finer finishes than adhesive backed discs. Hookit sanding discs conveniently attach to a hook-and-loop backup disc pad (sold separately), can be removed cleanly and easily, and can be re-used again and again for the extent of the abrasive life.

Ditch Dust with Load-Resistant Design

Sandpaper discs cut better and last longer when dust isn’t loading the cutting surface of the abrasives. Our proprietary multi-hole pattern on Clean Sanding products evacuates dust at a higher rate than 5- or 6-hole products. This hole design doesn’t require alignment of holes with the disc pad, making disc changes quick and simple. Open coat construction means the abrasive grains are placed with space between them to help evacuate dust and other sanding debris and avoid clogging the cutting edge of the grains. The load-resistant coating allows the disc to continue cutting even when sanding softwoods, paints, and other materials that would, otherwise, clog the disc and hinder sanding ability. All of this adds up to increased productivity and reduced material consumption. For maximum dust extraction, use this disc with a 3M Hookit Clean Sanding pad and a random orbital sander with vacuum (both sold separately).

Product description

Yamaha's 20 and 30 Series recorders are designed to provide a perfect start to anyone's musical education. They offer an ideal amount of air resistance for easy control, and feature an accuracy of intonation you would expect to find only one more expensive models. Though other maker's plastic recorders may have a similar appearance, Yamaha ABS recorders are truly superior instruments. Models are available with either 'German' or 'Baroque' fingering systems. The 20 Series, easy to play throughout their ranges, are primarily intended for beginners.30 Series recorders, which feature an arched wind-way for improved breath control and tonal expression, are for more advanced players. Note: The G stamp on the packaging indicates German style fingering (not the key).

From the Manufacturer

Yamaha 20 Series recorders are designed to provide a perfect start to anyone's musical education. They offer an ideal amount of air resistance for easy control and feature an accuracy of intonation you would expect to find only on more expensive models. Though other makers' plastic recorders may have a similar appearance, Yamaha ABS recorders are truly superior instruments. The 20 Series, easy to play throughout their ranges, are primarily intended for beginners.

• Excellent tuning and sound quality
• Made from durable and safe ABS plastic resin with no BPA
• Double holes for low C/C number and D/D number to improve tuning
• Simplified German fingering
• Includes cotton carrying bag and fingering chart
• Easy to play with a soft pure tone
• Ideal amount of air resistance for easy control and accurate intonation

User questions & answers

Question:	Where is this made
Answer:	The instrument is made in Indonesia and the little carrying bag case is made in India. Yamaha is a very durable brand.
Question:	the description states it is made in the US, but what does the packaging say
Answer:	made in Indonesia
Question:	does it come with case
Answer:	It comes with a cloth draw string bag.
Question:	has anyone compared this with the Yamaha YRS24B series ivory-colored models? Is this exactly the same, or different in feel and tone
Answer:	I teach a recorder class for high school students and we have about 20 models of the ivory recorders and about 15 of the colorful 20BG recorders. For whatever reason, the coloful models do seem to speak a little bit more easily, but both set the bar fairly high for plastic recorders-- way better than any of the other models we've purchased, including the more expensive brown and beige 302B Yamaha model (which looks great, but is quiet and does not hit the low notes as easily as this model.)

Product features

Start with great sound

Yamaha has been building musical instruments for more than 130 years, so we know what it takes to make a great sound. Our 20-series models produce a classic recorder tone that's pure and in tune across the whole instrument.

Easy for beginners

20-series recorders make it easy to play right from the start. The rectangular airway gives very little resistance, so even a light breath can make a clear note. A great choice for classrooms or beginners of any age!

Durable and safe

Made from the same kind of plastic used in countless popular toys, Yamaha 20-series recorders are built to last for years of reliable use. They can even be washed with soap and water, so keeping them clean is easy.

Colorful choices

Our see-through blue, green and pink models are playful, but produce the same great sound as our standard ivory colored models. Have fun with your music without sacrificing your tone.

Baroque vs German fingering - what's the difference?

The basic design of recorders was developed hundreds of years ago during the Baroque music period of the 1600's and early 1700's. This classical style is still preferred by many music teachers and schools, mostly because some specific notes play a little better in tune with this design.

In the 1920's, instrument designers in Germany felt that the standard Baroque recorder was too difficult for beginners to learn, since some notes put the player’s fingers in positions that can feel uncomfortable. Because of this, they made a small change to make those notes easier for a beginner to play. However, there's a trade-off – while the finger positions are easier, those same notes are harder to play in tune.

You can tell which version you have by looking at the 4th and 5th holes down from the top. If the 4th hole is smaller than the 5th, it's Baroque. If the 4th hole is larger, it's German. If you need a recorder to use in school, check with your teacher to make sure you get the right type!

Product description

NIOSH approved for protection against certain organic vapors, acid gases, chlorine, hydrogen chloride, sulfur dioxide, chlorine dioxide, hydrogen sulfide, or hydrogen fluoride. Use with 3M Half and Full Facepieces 6000, 7000 and FF-400 Series with a bayonet-style filter/cartridge connection or 3M Scott AV-3000 HT and AV-3000 SureSeal facepieceswith 3M Scott AV-632 Bayonet Adapter. Warning: Respirators help protect against certain airborne contaminants. Before use, the wearer must read and understand the User Instructions provided as a part of the product packaging. Follow all local regulations. In the U.S., a written respiratory protection program must be implemented meeting all the requirements of OSHA 29 CFR 1910.134 including training, fit testing and medical evaluation. In Canada, CSA standards Z94.4 requirements must be met and/or requirements of the applicable jurisdiction, as appropriate. Misuse may result in sickness or death. For correct use, consult supervisor and User Instructions, or call 3M Personal Safety Division (PSD) Technical Service in the U.S.A. at 1-800-243-4630. In Canada, call 1-800-267-4414. Disclaimer: 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, or death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.

From the Manufacturer

The 3M™ Multi Gas/Vapor Cartridge/Filter 60926 P100 may be used for respiratory protection from certain organic vapors, chlorine, hydrogen chloride, sulfur dioxide, chlorine dioxide, hydrogen sulfide, ammonia, methylamine, formaldehyde, or hydrogen fluoride, and non-oil and oil particulate concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with quantitatively fit tested full facepiece masks. This cartridge/filter is not for use in environments that are immediately dangerous to life or health (IDLH). Recommended applications for the cartridge/filter include petrochemical and chemical processing. Inventory needs and training requirements for safety equipment are reduced because this respirator cartridge selection works for many different applications. This cartridge/filter is commonly used in the following industries: utilities, pharmaceuticals, mining, and primary metals.

This multi gas/vapor cartridge/filter combination works with 3M™ Half and Full Facepieces 6000, 7000 and FF-400 Series with bayonet attachment holders. The cartridge/filter is NIOSH (National Institute for Occupational Safety and Health) approved for environments containing certain organic vapors, acid gases, ammonia, methylamine, formaldehyde and non-oil and oil particulates. The cartridge/filter has been assigned the color code “Magenta/ Olive” in the NIOSH system.

Breathing organic vapors, acid gases, ammonia, methylamine, formaldehyde and particulates can pose a risk to your health. NIOSH, a Federal government regulatory agency, has tested and approved the 3M™ Multi Gas Vapor Cartridge 60926 to help reduce exposure to certain organic vapors, acid gases, ammonia, methylamine, formaldehyde and particulates.

For more than a century, 3M has applied innovation and technology to improving our customers’ lives and supporting their business goals. Today the company, from its headquarters in St. Paul, Minnesota, serves industrial and commercial customers and consumers in nearly 200 countries. Personal Safety products, focused on worker safety, include respirators, hearing protection, air and noise-monitoring devices, eyewear, hard hats, welding shields, coveralls, fall protection, reflective material, and comprehensive training programs. The 3M brand, across thousands of products, represents consistency, superior quality, and value.

• Cartridge or Filter Type Cartridge / Filter Combo
• Gas & Vapor Protection Type: Organic Vapor/Acid Gas/Ammonia/Methylamine/Formaldehyde
• NIOSH Cartridge or Filter Assigned Color Coding: Magenta/Olive

User questions & answers

Question:	Why are they pink
Answer:	No. The quick latch would be #6503QL. Thank you for considering 3M products.
Question:	Would this work with cigarette smoke. I cant get a family member to quit and I don't want to breathe their carcinogenic smoke
Answer:	Blocks cigarettes sent the same way it blocks the occasional passing of gas. ...not well.
Question:	Can the filter be cleaned and reused
Answer:	Need to buy seperate
Question:	Will protect me against the zombie apocalypse
Answer:	Yes

Product features

3M Multi Gas/Vapor Cartridge

• Swept-back design allows an enhanced field of view and comfort
• Bayonet compatibility allows use with many 3M half and full facepiece designs
• Wide range of applications reduces inventory needs
• Simple installation and usage requirements reduce training needs

This multi gas/vapor cartridge/filter combination works with 3M Half and Full Facepieces 6000, 7000 and FF-400 Series with bayonet attachment holders. The cartridge/filter has been assigned the color code 'Magenta/ Olive' in the NIOSH system.

Product description

Enhance your drinking experience with clear plastic wine glasses. Our cups don’t just look good, they feel good. Rounded rims for a comfortable sip, stemless body prevents tipping and allows steady aerating of wine or drink inside. The shatterproof PET material makes it ideal for upscale events like holiday parties, formal dinner, catered celebrations or wherever you want to prevent the risk of broken glass. Versatile for water, cocktails, lemonade, juice, or even dessert, they’re light and easy to hold for kids too! What's Included? Set of 24 Plastic Stemless Champagne Glasses 9 Fluid Ounces Wine and Dine with Berevino!!

• Set of 24 shatterproof 9oz crystal clear coupes to display wines, champagnes, sparklings etc.
• Stemless body maintains stability whether glasses are sitting on a table, bar or tray
• Disposable. Reusable. Made of BPA-free, unbreakable, recycled PET plastic. Not dishwasher safe.
• Smooth rounded rims for easy sipping and slightly tapered sides for easy gripping
• For upscale weddings, caterings, banquets, cocktail parties and outdoor use like patio, pool beach etc. Provides the look of glass at the price of plastic

User questions & answers

Question:	What number recycling are these
Answer:	From reading other responses, I'm assuming everyone's understanding of stacking is something different. Based on my own view of stacking, I'd say they do stack. The taller cups fit so about 2 inches of the bottom fits into the top of another cup. The short cups fit about a 1/4 of an inch into the top of the other cup. You can stack to save space. We've only had them a few weeks, but we have not seen any scratches. We love them. They look like real glasses.
Question:	I was served champagne at an event with something similar and are looking for the same ones....Do these have a small indent for thumb while holding
Answer:	I've been washing mine in the dishwasher (top shelf only) for over 4 months now. Kids handling them (and dropping them) as well. I was afraid that 'plastic' would scratch/crack/get cloudy. None of this has happened to any of the 12 I bought last year (six 16oz and six 24oz). They've held up so well, I'm buying another 12 to replace the remaining pre-acrylic glasses I have. Very, very happy with them. They are also not 'slick' like glass can be.
Question:	Does anyone know are these reusable
Answer:	They'd definitely survive. My son has dropped one from about 4 ft, it landed heavy side down on tile and we got a little chip on the bottom, it is still fully functional just not perfect to the eye during inspection. Glass looking with the sturdiness of plastic.
Question:	What are the dimensions of the individual flute
Answer:	YES, they do collect water on the bottom in the washer. I have no idea what these other people are talking about, but they are simply dead wrong. It's seriously annoying. There's a pool of water on top of each upside down glass after my dishwasher gets done, even with the extended heated dry option.

Product description

The 3M Replacement P95 Particulate Filter 5P71 helps provide respiratory protection against a wide range of oil and non-oil based particulate contaminants. MUST BE USED with appropriate 3M 5000 Series Respirators or 6000 Series Cartridges for various applications including spray painting, lacquering, petrochemical and chemical manufacturing, and pesticide spraying and agriculture for concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces, or 50 times PEL with quantitatively fit tested full facepieces. When used with the appropriate respirator, the filter protects against: 1) solids such as those from processing minerals, coal, iron ore, cotton, flour, and certain other substances; 2) liquids or oil based particles from sprays that do not emit harmful vapors; and 3) metal fumes produced from welding, brazing, cutting, and other operations involving heating of metals. This filter has been rated P95, which means it filters at least 95% of airborne particles and is strongly resistant to oil. Warning: Respirators help protect against certain airborne contaminants. Before use, the wearer must read and understand the User Instructions provided as a part of the product packaging. Follow all local regulations. In the U.S., a written respiratory protection program must be implemented meeting all the requirements of OSHA 29 CFR 1910. 134 including training, fit testing and medical evaluation. In Canada, CSA standards Z94. 4 requirements must be met and/or requirements of the applicable jurisdiction, as appropriate. Misuse may result in sickness or death. For correct use, consult supervisor and User Instructions, or call 3M Personal Safety Division (PSD) Technical Service in the U. S. A. In Canada. Disclaimer: 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e. g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e. g., U. S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and limitations. Misuse of 3M industrial and occupational products may result in injury, sickness, or death. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.

• MUST BE USED WITH 3M 5000 Series Respirators or 3M Cartridges 6000 Series gas and vapor cartridges (also with 3M 501 Retainer when particles are also present).
• NIOSH APPROVED for environments containing certain oil and non-oil-based particles. Rated P95 filtering at least 95% of airborne particles and is strongly resistant to oil.
• REDUCE EXPOSURE TO PARTICULATES when used on top of 3M 603 Filter Holder and 3M 501 Retainer. Solids such as those from processing minerals, coal, iron ore, cotton, flour, and certain other substances
• REDUCE EXPOSURE TO METAL FUMES produced from welding, brazing, cutting, and other operations involving heating of metals.
• REDUCE EXPOSURE TO LIQUIDS OR OIL-BASED PARTICLES from sprays that do not emit harmful vapors.
• VARIOUS APPLICATIONS including spray painting, lacquering, petrochemical and chemical manufacturing, and pesticide spraying and agriculture when used with appropriate 3M 5000 Series Respirators or 6000 Series Cartridges.
• NIOSH approved for environments containing certain non-oil based particles

User questions & answers

Question:	Can these be washed and effectively reworn after washing
Answer:	Speaking for myself, I have a white medium long hair older nice cat and would not have his paws be black leaving the litter bin, could perhaps effect his stomach via grooming. H.C.
Question:	Where can I find P100 versions of this same pre-filter style that goes under the retainer/over a cartridge
Answer:	Hi there, while we can't guarantee this would be a good mix for springtails, other customers have had great success!
Question:	Will this stop me from smelling my queen's brapps
Answer:	No. Activated carbon adsorbs gas; it does not absorb it. Adsorb is correct in this case.
Question:	When replacing the p95 particulate filter, does one have to replace the 501 filter retainer as well
Answer:	The yellow bottle has 560mg tablets while the green bottle has 280mg tablets. Recommended dose from what I can see is the same. This bottle is just a little more powerful from what I can tell.

Product features

3M 5P71 P95 Particulate Filter

• Use with 3M Respirators 5000 Series or 3M Cartridges 6000 Series or 3M Filter Adapter 603, and 3M Filter Retainer 501
• For occupational use only

When properly fitted, use with appropriate cartridges for various applications including spray painting, lacquering, petrochemical and chemical manufacturing and agriculture for concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with full facepieces. Use with 603 adapter if only particulate protection is required.

Product description

NIOSH approved against certain organic vapors and non-oil and oil particulates. Use with 3M Half and Full Facepieces 6000, 7000 and FF-400 Series with a bayonet-style filter/cartridge connection or 3M Scott AV-3000 HT and AV-3000 SureSeal facepieces with 3M Scott AV-632 Bayonet Adapter. Warning: Respirators help protect against certain airborne contaminants. Before use, the wearer must read and understand the User Instructions provided as a part of the product packaging. Follow all local regulations. In the U.S., a written respiratory protection program must be implemented meeting all the requirements of OSHA 29 CFR 1910.134 including training, fit testing and medical evaluation. In Canada, CSA standards Z94.4 requirements must be met and/or requirements of the applicable jurisdiction, as appropriate. Misuse may result in sickness or death. For correct use, consult supervisor and User Instructions, or call 3M Personal Safety Division (PSD) Technical Service in the U.S.A. at 1-800-243-4630. In Canada, call 1-800-267-4414. Disclaimer: 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, or death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.

• NIOSH approved against certain organic vapors and non-oil and oil particulates
• USE WITH 3M Half and Full Face Pieces 6000, 7000 and FF-400 Series with a bayonet-style filter/cartridge connection or 3M Scott AV-3000 HT and AV-3000 SureSeal facepieces with 3M Scott AV-632 Bayonet Adapter
• SWEPT BACK DESIGN allows an enhanced field of view and increased comfort
• VARIETY OF USES: When properly fitted, use in a variety of applications including chemical clean-up, compounding, and transfer; laboratories; and pesticide applications as well as in the following industries: agriculture, chemicals, mining, oil and gas, pharmaceuticals, and primary metals.
• EASY TWIST ON AND OFF: Bayonet connection twist on and off easily for quick assembly and disassembly with many 3M half and full facepiece designs.
• For industrial/occupational use only. Not for consumer sale or use.
• Combined Organic vapor cartridge with P100 particulate filter

User questions & answers

Question:	Change out time is 30 days or 40 hours of use, and i opened my filters about 30 days ago but i have barley used them for an hour. do i need to change
Answer:	I change them as needed. I use mine infrequently as well, so change filters when I start feeling they are not effective anymore. Mine have lasted much longer than 30 days/40 hours.
Question:	How can i order another set of these for my husband's mask who is working directly with c-19 patients daily? he is wearing his own ppe
Answer:	If you can't get them here, try going directly to 3M. These things are twice as effective as ANY N95 mask. Good luck.
Question:	Will this filter out the hydrogen carboxylic acid, common name: formic acid, that is used in mite-away quick strips for bee hive mite treatment
Answer:	Thanks for your question. In the 3M Respirator Selection Guide (www.3M.com/respiratorselector) we suggest that either an acid gas cartridge (6002/60922) or a formaldehyde cartridge (6005/60925) may work better (longer service life) than the organic vapor cartridge (6001/60921) for filtering formic acid. Thanks!
Question:	Can these filters be washed in water without degrading their capability
Answer:	Absolutely not. The filters' main use is for filtering out organic compounds. This is achieved my means of activated carbon. The activated carbon will not work if made wet. For reference, I am able to use them pretty heavily for painting for about three months.

Product features

3M Organic Vapor Cartridge/Filter 60921

The 3M Organic Vapor Cartridge/Filter 60921 P100 helps provide protection against certain organic vapors and particulates in a variety of environments. The cartridge/filter combination may be used for respiratory protection from certain organic vapors and non-oil and oil particulate concentrations up to 10 times the Permissible Exposure Limit (PEL) with half face respirators or 50 times PEL with quantitatively fit tested full face respirators. This cartridge/filter is not for use in environments that are immediately dangerous to life or health (IDLH). Recommended applications for the cartridge/filter include chemical clean-up, chemical compounding, chemical transfer, laboratories, and pesticides application.

FEATURES:

• NIOSH approved for protection against certain organic vapors and particulates
• Swept-back design allows an enhanced field of view and comfort
• Bayonet compatibility allows use with many 3M half and full face respirator designs

Product description

Add Elegant to your party with the MUNFIX PLASTIC STEMLESS CHAMPAGNE GLASSES

The MUNFIX fancy toast champagne flute is perfect for catered events, parties, bars, nightclubs or any other event where you require an economical alternative to permanent glassware. This disposable cocktail glasses are made of durable clear hard plastic.

The Munfix Clear Plastic Flute are Elegant and practical, Premium Plastic Disposable Cups a must-have for the frequent party hostess! use it for wine cups, champagne cups, mimosa cups, or water cup. ideal for bridal shower, bachelorette engagement parties, weddings, sophisticated events and New Year's Eve parties.

PLEASE NOTE:The Munfix Stemless Flutes are not dishwasher safe

• Add elegant to your party with the Munfix Stemless Clear Plastic Champagne Glass Flute
• Ideal for catered events, parties, bars, nightclubs or any other event
• Perfect for Mimosas, Bloody Mary's, Wine Glasses, Sodas, Cocktail Cups, Parfaits, Sundaes and Other Desserts
• 9oz Shatterproof Wedding champagne flutes Made of durable premium hard recyclable plastic, BPA-Free, Not dishwasher safe!.
• Bulk Pack of 48 disposable champagne flutes plastic stemware save you time and energy

User questions & answers

Question:	What number are they for recycling? My area only recycles 1 and
Answer:	It is a little difficult to make out. But after checking a few glasses , they are # 1.
Question:	How big is the opening on top of the glass
Answer:	It's a standard opening like most champagne glasses. These worked perfect by the way for our mimosa bar.
Question:	Can these be reused
Answer:	Yes. I've bought them twice, once for a shower and again for a Christmas party. I could have reused but I was too lazy to wash and my dishwasher isn't working lol. I did keep a few just for personal use, washed them many times and they are still perfect. Great product.
Question:	How tall are these
Answer:	They are 6 1/2 inches tall and just under 3 inches wide at the smallest, the top of the flute and just over 3 inches at the widest section, at the base. I bought these for a champagne toast at my wedding. I think that they are the perfect size!

Product description

3M TEKK Protection Organic Vapor Replacement Cartridges, used by professionals for sanding and scraping of lead-based paint in certain projects, are NIOSH approved and provide at least 99.7% filter efficiency against solid and liquid particles that contain oil. Easy to use with 3M TEKK Protection 6000 Series Respirators, 3M TEKK Protection Organic Vapor Replacement Cartridges are great choice in respiratory protection for the pro when working on certain lead-based paint projects.

• Use for sanding and scraping of lead-based paint in certain projects
• Use for mold remediation in accordance with US-EPA Guidelines
• For workplace/occupational applications only

User questions & answers

Question:	will this protect from round up
Answer:	I would think so. I used these filters when I refinished my hardwood floors during the stain and oil based polyurethane coatings (very noxious fumes). The fumes were bad enough that even with windows open and fans running it kicked off my natural gas water heater due to combustion risk. Through out this hours long process over several days I used these and didn't have so much as a headache. About the 3rd day of use (~24 hours of use I'd estimate) I had to change the filters as I could start to smell the fumes through the mask. I would happily use these again and would feel safe using them for Plastidip.
Question:	Is this suitable for spraying Plastidip
Answer:	No. These do not filter the air leaving your mouth which is crucial to slowing virus spread. The air coming in would be filtered but this would be overkill and not any more effective than a N95 mask.
Question:	Will these work with the virus going round
Answer:	There is a cross-compatibility matrix for filters/cartridges and respirator models on the 3M website
Question:	Are all 3M filters and cartridges interchangeable on one of their standard respirators
Answer:	No. You need a supplied air system. Please contact the 3M Techline at 800-243-4630 to discuss options. Thank you for considering 3M products.

Product features

3M 6001PB1-1 Organic Vapor Replacement Cartridge, 1-Pair

3M Organic Vapor Replacement Cartridges, used for sanding and scraping of lead-based paint in certain projects, provide filter efficiency against solid and liquid particles that contain oil. Easy to use with 3M 6000 Series Respirators, 3M Organic Vapor Replacement Cartridges are great choice in respiratory protection for the pro when working on certain lead-based paint projects.

• Use for sanding and scraping of lead-based paint in certain projects
• Use for mold remediation
• For workplace/occupational applications only
• Fits 3M 6000 Series Respirators

• FEELS LIKE HEAVEN: There’s nothing more charming than sipping your favorite fizz from glass that nestles comfortably in your hand, instead of short fat champagne glasses. So that’s why we created a Crystal Stemless Champagne Flute that shines just like a stem one, and with that same tapered class.
• THE PERFECT BALANCE: Each stemless champagne flute features a slim bowl that’s perfectly weighted. Not so heavy it slips from your grip, but not so light to feel like plastic! 2” wide and 6.5” tall, with a perfect flat bottom, they stay sublimely balanced while balancing your bubble’s aromatic bouquet.
• LEAD-FREE CRYSTAL GLASS: Notice how thick, robust and slender your skinny drink glasses are. Strong crystal glassware like this is free from glass bubbles, easier to set down without worrying about breakage, and easier to clean. These tall champagne glasses are Dishwasher Safe and effortless to fit!
• BRUNCH. MIMOSA. REPEAT: Fill your cup! The JoyJolt Milo Set of 8 Stemless Glasses looks beautiful as a Mimosa Glass, and Prosecco Glasses, flowing with Cristal or Rose Sparkling Wine Glasses. If it’s worth toasting with, then it belongs in a cute bar glass set that adores the sound of a ‘clink’!
• SECURELY BOXED: The Milo 8 PC Stemless Flute Glasses Set comes securely bubble-wrapped in a thick box, so any plans for gifting will be success! Affordably priced for this type of quality, and with a 12 Month Guarantee, they’re an effortless and beautiful gift for anyone who likes to imbibe joy.

User questions & answers

Question:	how tall are these glasses
Answer:	It is 1 1/2 inches at the base, and ~2 1/2 inches at the widest point. It’s a narrow tulip-shape, so it’s wider a little further up the glass.
Question:	Are these microwave safe
Answer:	I am sorry I didn’t pay attention to that on the box. I was more concerned if any were damaged. They arrived as scheduled and nine were damaged. They have some weight to them compared to the stemmed flutes. I used them to bring in the new year and there were no tip overs.
Question:	Could anyone possibly tell me the diameter of the bottom of the glass? (I’m looking for glassware that specifically fits into a flight paddle I own
Answer:	I would guess a little more than 3 inches. It is well sized champagne flute and worked great for our event.
Question:	Where are they made
Answer:	No they are not stackable

Product features

Brunch. Mimosa. Repeat.

Nothing says “cheers” like a cork pop and the clink of crystal flutes . But listen, because not all barware is durable enough for a celebration!

Each Milo glass is 0.6oz and crafted from Lead-Free Crystal, mineralized for durability, and the rim is 2mm thick! So go ahead and enjoy a fancy toast! And, because we used this particular polished crystal, you’ll enjoy the bubble-less, diamond shine. Champagne’s display their golden tones, Rose’s blush, and Mimosa’s burst into a sparkling display of orange joy!

Easy to Hold

This 0.6oz glass is shaped with a slim bowl that’s perfectly weighted for effortless handling. 6.5” Tall and 2” wide, with classic taper, it’s easy to pick up and place down with and easy grip

Satisfying with Each Sip

Each glass holds 9.5floz of your favorite Bubbly and of course Mimosa’s! But before that first sip, remember to take a satisfying pic of how nice your drink looks in this instaworthy glassware

No-Wobble Base

Notice the gorgeous slender bowl, it adds extra allure to the glass. But unlike some others you’ve seen, we used precision machining to make each base perfectly flat and wobble-free

Dishwasher Safe

Just like all robust JoyJolt Glasses, these are dishwasher safe, and without a stem they’ll fit easily fit. There are no iridescent coatings to flake off and chip, so they’re easy to wash

Product description

1)Before delivery, our flute are tested by professional quality inspector again to verify that they meet our standards. 2)Made from Real CUPRONICKEL Closed Hole 16 Keys Design 3)Key of C with C Footjoint,High Quality Pads 4)Free Tuning Rod, Polish Cloth, Cork Grease,White Gloves

• Whether you want to buy a flute for yourself or for your friends or others, this flute is a product of choice as a result of its high quality and cost effective price
• The leather pad offers great water resistance and air tightness
• Made from Real CUPRONICKEL which contributes to high durability and wonderful tone.
• Closed Hole 16 Keys Design
• The high grade needle spring has a long lifetime and ensures good

User questions & answers

Question:	What’s the difference between $1000 and this one
Answer:	This flute is made from junk metal, cannot be repaired, isn’t in tune, cannot be sold if your kid stops playing and has closed holes. A $1000 flute is a professional instrument.
Question:	I wonder if the resonance (sound) is metal or plastic
Answer:	This Glory Flute is amazing for the price. Better than many double or triple the price. Nice mellow sounds. The flute is all metal and very polished.
Question:	How well does it play compared to an Armstrong flute
Answer:	There is a WORLD of difference between these flutes and even the entry level Armstrong, starting with durability but extending to tone, embouchure, key action, pads, springs, and serviceability - just to START. The ONLY time spending money on one of these is "worth it" is if there are no other options, in my opinion. Who am I to say so? I have played flute(s) for 46 years in marching bands; concert bands; orchestras; as a soloist & in ensembles; for festivals, weddings, and other events. I was chosen for a prestigious youth symphony, a nationally known marching band, and hired by a pro symphony orchestra at age 20. I have played Artley, Bundy, De Ford, Emerson, Selmer, Armstrong, Gemeinhardt, Pearl, Azumi, Yamaha, Muramatsu, Powell and Haynes flutes, in addition to nearly all of the recent Chinese imported brands like Sky, Glory, Mendini, etc. I have also played Artley, Armstrong, Gemeinhardt, Jupiter, and Yamaha piccolos (and tried the imports, too). I've taught flute lessons for over 30 years, and I've worked with flute techs, ad by myself, on almost every instrument brand over the last decade. The BIGGEST PROBLEM with cheap,imported flutes is that that are not fixable. Many techs will not work on them. The metal is soft/poor quality. They bend easily and the springs, keys and tome holes do not last. The companies do not stand behind them. (Try returning one for warranty work.) You MIGHT have time to learn the fingering for notes before your flute expires, or if you are exceptional, your instrument may last longer. You are, in my EXPERT opinion, far better off to spend a bit more and get even a USED Armstrong, Gemeinhardt, Yamaha, Emerson, Artley, etc. than to buy one of these. Silver, even plate, sounds MUCH different than "cupronickel metal" colored silver (or something else). A beginner won't hear it. A musician will.
Question:	How long does it take for the paint to start chipping off and what is the paint made out of
Answer:	At first it was awesome! After 2 weeks.. the color chipped off..