13 best nux bass distortion pedals

• Reissue Series as a heavy distortion sound with tight bass response.
• Pure analog circuit to simulate that typical American pre-amp high gain tone from the 90's
• Extra amount of gain boost to the higher frequency for more "in-your-face" distortion effect
• Bass and High Passive EQ
• True-bypass Hardware Switching

User questions & answers

Question:	Does this include the power supply
Answer:	The answer is no. Does not come with a power supply, very few effects do. I use Trutone One Spots. They're about 20 bucks and they're great little adapters for effects.

• A bass guitar preamp, DI box, impulse response (IR) loader and audio interface for practicing, gigging and recording in the box.
• 3-Band Equalizer with Middle Frequency Selector.
• Drive with blend control.
• Built-in noise reduction. XLR DI output.
• Micro B USB input for firmware update, software control, IR loading, and audio stream

User questions & answers

Question:	Does it include a power supply or does it run on 9v battery? DonInnwes to buy a power supply for it is what I need to know
Answer:	No. You need to buy a 9V AC/ DC power adapter, I recommend low noise AC / DC 9v adapter NUX ACD-006A.

Product features

A bass guitar preamp, DI box, impulse response (IR) loader and audio interface for practicing, gigging and recording is in one

Closer Look NBP-5 Bass Preamp + DI features fully sweepable mid-range frequencies in addition to Bass and Treble controls. Melvin L. Davis is proficient at 4, 5, 6 and 7 string basses, so, MLD Bass Preamp has a wide range of frequency control. Volume Knob Adjusts the overall output volume of the pedal. Ideal for fine-tuning the output on clean tone, it also controls the DI output volume. Blend Knob Adjusts to blend between the clean signal and overdrive signal. The clean signal remains as unity gain, allowing for fine control of the blend ration. Drive Knob Adjusts the Gain level and sets the saturation level in the overdriven signal. 3-Band Equalizer with Middle Frequency Selector Bass : +/- 12dB @40Hz Middle : +/- 17dB @160Hz to 1000Hz Freq. : 160Hz ~ 1000Hz Treble : +/- 12dB @8000Hz

NUX Bass Preamp + DI Software

You can connect the pedal to your Windows / MAC computer to use the editor software. You can load your own IR files and control various other settings. Supported IR file: 48 kHz / 24-bit, 1024 Samples

Bass Amplifier Models

Bass Preamp + DI pedal comes with 2 amplifier models, you can select and control the amps and the Noise Reduction on the software easily.

Speaker Cabinet Models (IR)

There are 8 IR presets (4 factory / 4 user) in the Melvin Lee Davis Bass Preamp + DI, and the pedal comes with the selection of speaker cabinet IR files created by NUX. Also there is an independent volume control for the cabinet simulation to adjust the IR level.

Recording With Melvin Lee Davis Bass Preamp

You can record your bass guitar without using any audio interface. MLD Bass Preamp + DI has a built-in audio streaming function, so you can connect the pedal directly to your computer with a Micro B USB cable, and it is ready to play and record. A driver free* solution that helps you to produce music with direct connection. You can use the headphones output for monitoring, you will hear both your guitar and the audio from your computer.

• Roctory is a word mixed with Rotary speaker simulator and polyphonic Octave effects
• With NUX original TSAC Technology, it faithfully recreates the lush swirling sound of the rotating lower speaker and the treble rotor horn in 3 Dimensions.
• It even captures the characters of the over-driven tube amp to the speaker!
• TSAC Technology Rotary Speaker Effects Slow/Fast Switch with Adjustable Rising Time
• Built-in Overdrive Accurate Polyphonic Octave Effects: +1 Octave and a -1 Octave FET

User questions & answers

Question:	how well will this work on Bass
Answer:	Pretty swell, so long as it doesn't conk out like mine did. Barely lasted a month...
Question:	Can I use this pedal with a battery
Answer:	Noninternal battery connection. And since The mfg specs say it needs 200 mA current. , I donT know if one of those snap on battery plugs would work. Many common 9v pedal power supplies provide less than 200., and will not work.
Question:	Does pedal include AC adapter
Answer:	No, the 9V (center negative) power supply is sold separately.
Question:	Can a normally open spst switch be plugged into the exp. input and function like the fast/slow switch on the pedal
Answer:	Beats me. Why, if the button is already on the pedal???

Product features

Polyphonic Octave and Rotary effect with rotary speaker simulator

There are many great guitar players remembered with their guitar sound as their guitar skills. And most of them have incorporated the rotary speaker into their rigs.

The Roctary is a tribute for that legends and their sounds.

Slow Breathe

Fast Horn

Blues' Organ

Lead Organ

• NUX Cerberus multi-effects pedal,can be used as a stand-alone device or 4 cable method connection
• including Inside Routing, IR loader, Analog Overdrive,Distortion and Digital Effects
• MIDI control to organize your own effect pedals
• 16 effects,128 presets (32 banks x 4 presets)
• An integrated loop switcher, IR loader, kill dry function, 0 to 20dB volume boost and an accurate tuner

User questions & answers

Question:	What are the dimensions
Answer:	12.6 x 4.3 x 2.5 inches
Question:	I see it has 2 outputs, but are the modulation effects in stereo
Answer:	Hello, Yes, this unit has 2 stereo outputs.
Question:	Is it battery operated
Answer:	No, and as a matter of fact you have to supply your own AC adapter. Its a Pig/Hog 9v. It's the only device I've bought that does not come with its own AC adapter.
Question:	What other ir's are available for this unit? are you able to create your own ir's? does it have the abilty to download 3rd party ir's from other site
Answer:	you can download other 7 IR from the website in the Manual Book. it is ok to download 3rd party ir's from other site, and you need to change the format as the IR inside.

Product features

You can connect your all-time-favorite gear to Cerberus by placing it between analog and digital sections.

An integrated loop switcher, IR loader, kill dry function, 0 to 20dB volume boost and an accurate tuner into a simple-to-use floor unit. Great tone, ultimate flexibility, easy control, and extreme portability make Cerberus ideal for all players. It also has an additional foot control switch for the selected functions of your choice and you can also connect an expression pedal while it becomes a volume control option before the digital section.



Control switch can be assigned as Reverb, Mod FX, Drive Section Bypass or Clean Boost (0dB - 20dB)

Overdrive/Distortion

Well-Selected Modulation Effects

Delay,Reverb and IR Loader

60’s Delay (Tape Delay) 55ms - 550ms

70’s Delay (BBD) 40ms - 400ms

80’s Delay (Digital Delay) 80ms - 800ms

TAP TEMPO

TAP TEMPO delay range is 125ms -1500ms for all delay types.

Product description

A tons of bottom and aggressive high make Metal Core is suitable a hardcore player! Bass and high controls the tone very easily. Voice1 and voice 2 have big different from old school to a modern thresh metal!

• 2 high-gain tone circuit positions and 2 great tones.
• Built-in Noise Gate with an adjustable gate parameter.
• Level,Gain, Bass and Treble controls that allow you to fine-tune any tone.

User questions & answers

Question:	Item page picture is the old model which sells for $29, not the deluxe model. the illustrations are of the flanger core pedal. what's going on here
Answer:	now only metal core deluxe in the market. we will update the pictures. thanks for your message.
Question:	Im using 9v battery to power my amp and no sound is coming out. The light is on so is this product defective or am i doing something wrong
Answer:	I use the adapter on mine and it works fine. Are you sure the battery is good? There may be enough juice to light the LED light, but not power the pedal. It is a cheap pedal. It may be defective???
Question:	Can I use this on a bass
Answer:	You can use practically any guitar pedal on a bass. But, because of the lower frequency, I would get a pedal designed specifically for bass guitar to ensure you don't get a "muddy" sound.

• Solid Studio comes with 8 speaker cabinet simulations. All the cabinet models inside the Solid Studio are sounds great as original as the way it feels.
• 8 microphone models you can combine with any cabinets. You can adjust microphone position for fine tuning.
• Power Amp Simulation produces a warm tube-like sound and you can choose one of three power tubes for your essential sound needs.
• STEREO Output and DI Output, and a Bypass "THRU" Output
• You can capture any of your favorite amplifiers sound and create your own IR file by Solid Studio. Place the microphone to the front of the speaker and adjust the capturing position as you desire.

User questions & answers

Question:	Does this have true bypass
Answer:	Yes
Question:	Mine also as mentioned has a noise and customer service was no help so i have a $200 paperweight
Answer:	Hi, Numark support here! Yes, your DVS license and the supplied software can be obtained by registering your product on the Numark website.
Question:	Is it line level output or still connect to hi-z
Answer:	Numark support here! With the RCA inputs on the back, you can use this as a standalone mixer also. If you have any other questions, please call or email us using the contact information on numark.com/support.
Question:	Can this be plugged straight into a speaker
Answer:	This is an analog mixer you need an interface (I'm using the Denon DJ DS1 DVS interface) to run Serato. You will also need timecode vinyl if you are using turntables.

Product features

NUX Solid Studio Microphone Simulation

There are 8 microphone models you can combine with any cabinets. Also, you can adjust microphone position for fine tuning.

Power Amp Simulation

Solid Studio Power Amp Simulation produces a warm tube-like sound and you can choose one of three power tubes for your essential sound needs.

• Gold and Silver modes,2 independent pedal sound in one mini stomp box
• Gain, Treble and Output Controls
• Voltage Converter
• True Bypass / Buffer Bypass
• Power：9V Negative Tip

User questions & answers

Question:	Does the nux horseman come with a 9v power supply? I received one and it has no power supply
Answer:	there is no 9v power supply in the original package. any 9v power adapter for guitar pedal is ok for Horseman.

Product features

Two in One Overdrive Pedal

One of the most sought-after dual overdrive pedals produced in the mid '90s is now in one unique pedal design-with a pocket size. NUX Horseman pays homage to the legendary Centaur pedal. There are 3 dials for primary settings and 2 modes: Gold and Silver, and it offers massive headway usually requiring an 18v input.

Gold Mode mimics its>

NUX Unique Design

The sound is based on the Centaur's voltage converter circuit. But the Horseman's characteristic design is crafted with a built-in OP-AMP voltage-converter driving the 18V to OP-AMP. Higher voltage-supply orders-up more harmonics, and convincingly reproduces the sound of this unique pedal.

Clean Boost Another “classic” way to use the NUX Horseman. Very useful when used in combination with the amplifiers drive channel (or any other drive pedal). And, depending on the Gain - Output adjustment, it lets the Horseman be used as a clean boost. Dial-up a low-gain with a high output setting, and it adds mostly volume and minimal color to your sound.

Natural Distortion

Additionally, the controls can be set to distort the sound signal in the pedal, where two Schottky diodes can perform a waveform clipping. ( The germanium diodes are discontinued, we especially select the Schottky diodes to replicate the waveform clipping ) The "gain" knob is a double potentiometer (a "dual-ganged gain pot"), which controls bass and middle frequencies. Treble and volume are each controlled with separate knobs.

True/Buffer Bypass

NUX Horseman has an optional bypass mode. You can use the pedal in True Bypass mode to keep your signal untouched when the pedal is OFF in the chain. We highly recommend to select buffer bypass mode if you have more than 4 pedals connected together; switch to Buffer Bypass mode and there will be no signal loss in your pedal chain!

Push and hold the footswitch and power-up the pedal; the LED indicator will show which bypass mode is activated; RED - True Bypass / GREEN - Buffer Bypass.

Product description

The MG-100 has so many features, its hard to name them all. But, here we can list: 13 classic amp models via NUX's TS/AC technology, vintage 3-band passive EQ modeling for every amp model, 6-band graphic EQ designed specifically for electric guitar (120hz,250hz,750hz,1.6khz,3.2khz,6.4khz), 11 cabinet models, seamless and quick preset switching , loop sounds can be played with drum machine, rhythm beat synchronously. The aux in jack makes it easy to practice along with MP3, CDs and other inputs. Large color TFT LCD panel (160 x128), graphic interface making the overall operation easy and intuitive. A total of 72 presets, 36 factory + 36 user presets.

• A total of 58 effects ; up to 8 can be used simultaneously
• Up to 40 seconds phrase loop with sound on sound adds more playability
• Built-in drum machine with CD quality PCM sounds
• Large color TFT LCD panel (160 x128), graphic interface making the overall operation easy and intuitive
• Six AA/LR6 alkaline batteries all up to 8 hours of continuous use

User questions & answers

Question:	Can you record the drum beat in the loop
Answer:	There's no WAH mode. Instead, the NUX MOD Core DELUXE offers chorus, flanger, phaser, tremolo, U-Vibe, Vibrato, and rotary effects plus Pan with High and Low Cut effects.
Question:	Does this have a metal construction or a plastic construction, if it has both which parts are metal and which are plastic
Answer:	Using the stereo outputs it will pan left to right, but you won't have control of this.
Question:	Would the amp settings(bass,mid,high)be left in a neutral position with this
Answer:	It should work just fine... A 9V DC center-negative power supply is the standard for pedals. (make sure this is the case)Be careful, mine unit lasted only a couple of days before becoming into trash...
Question:	have you this adresse of the manual of NUX MG100, please
Answer:	You can output to a mixer, soundcard, or full-range speakers. You can check out the user manual on how to set up the NUX Loop Core Deluxe with studio monitors at [t. ly/zey8].

Product description

Specifications:

Input: 1/4 inch monaural Jack(impedance: 1MΩ)

Output: 1/4 inch monaural Jack(impedance: 10KΩ)

Power Supply: DC 9V AC adapter (center minus plug)(not included)

Working Current: 20mA

Item Size: 4.2 * 9.2 * 3.5cm/ 1.7 * 3.6 * 1.4in

Item Weight: 170g/ 6oz

Package Size: 11.5 * 6.5 * 7.5cm/ 4.5 * 2.6 * 3in

Package Weight: 260g/ 9.2oz



Note:

Power adapter is not included.

Please use the power adapter whose polarity is positive pole outside and negative pole inside. Otherwise, the product may not work properly.



Package List:

1 * Effect Pedal

2 * Stickers

1 * Users' Manual(English & Chinese)

• 【 2 Working Modes 】 Gold mode(mimic of the classic gold centaur overdrive pedal); Silver mode(a powered version with an extended gain range).
• 【3 Control Buttons】 TREBLE(adjusts the high frequency level to make the sound dark or bright), OUTPUT(adjusts the output level), GAIN(adjusts overdrive effect under the gold mode; adjusts near-distortion effect under silver mode).
• 【True Bypass/ Buffer Bypass Modes】For running the pedal. Push and hold the footswitch and power up the pedal to select the True(Red LED indicator) or Buffer(Green LED indicator) bypass mode.
• 【Built-in OP-AMP Voltage-Converter 】Driving the 18V to OP-AMP. Higher voltage-supply orders-up more harmonious and more various sound effects.
• 【Clean Boost】The Horseman can be used as a clean boost via the gain and output controls. Dial-up a low-gain with a high output setting, and it adds mostly volume and minimal color to your sound.

Product description

NUX Solid Studio was created and designed to address: limited gear availability, and the cumbersome transport reality of physical amp/speaker cabinets.

NUX is proud to introduce the new Verdugo series Solid Studio IR & Power Amp simulator, a pedal version of the most classic amp/cabinet scenarios including microphones and power amp tubes. Over many years of research, Solid Studio was specifically developed to fill the essential needs of discerning musicians and sound technicians, including the art of mic-ing instrument amplifiers on stage or in the studio. Solid Studio provides ease-of-use, reliability, versatility, and, above all, incredible audio quality.

Virtual mic-ing is achieved by choosing 1 cabinet and 1 microphone, and fine-tuning the position of the microphone using the mic position switch. Plus, you can add the tube sound by engaging the power amp simulation.

• Solid Studio comes with 8 speaker cabinet simulations. All the cabinet models inside the Solid Studio are sounds great as original as the way it feels.
• 8 microphone models you can combine with any cabinets. You can adjust microphone position for fine tuning.
• Power Amp Simulation produces a warm tube-like sound and you can choose one of three power tubes for your essential sound needs.
• STEREO Output and DI Output, and a Bypass "THRU" Output
• You can capture any of your favorite amplifiers sound and create your own IR file by Solid Studio. Place the microphone to the front of the speaker and adjust the capturing position as you desire.

User questions & answers

Question:	Is there a headphone out for silent practice with your pedalboard
Answer:	There is no hole to plug in the earphone. You can directly connect the earphone with a 6.5mm plug to convert

• An analog acoustic preamp with digital effects and looper function.
• with Reverb and Chorus effects and, each effect designed to control by only one-knob.
• Versatile Preamp,you can optimize the preamp input according to your guitar pickup type, you can set Piezo or Magnetic for better signal processing.
• 3-band EQ (Bass, Middle and Treble),60 Seconds Looper
• Notch Filter ON/OFF Toggle Switch with Precision Adjustment Control,XLR DI Output

User questions & answers

Question:	Phantom power
Answer:	No.
Question:	Can this pedal mute its output? (For example, when tuning
Answer:	this pedal has no mute switch.
Question:	Does this come with power supply
Answer:	this pedal is without power supply. Any power supply for guitar effects is ok for it.
Question:	where are they manufactured
Answer:	Cherub Technology in China,

Product features

Improved Clarity,One-Knob Control High-Quality Effects

Improved Clarity

NUX Stageman Floor is an analog acoustic preamp with digital effects and looper function. Preamp featured with a highly sensitive 3-band EQ with MID scoop toggle switch, adjustable notch filter, and input gain control. And it provides a ginormous headroom which delivers the sound all natural.

One-Knob Control High-Quality Effects

It equipped with Reverb and Chorus effects and, each effect designed to control by only one-knob, when you tweak the chorus or reverb knob from 0 to 10 it adjusts multiple parameters with a perfect balance. And the chorus switch is a momentary footswitch, while you push and hold, it will activate the freeze effect until you release it.

Notch Filter

You can turn ON the notch filter and adjust the frequency to clean the notch sound caused by a guitar pick or nails.

Versatile Preamp

Also, you can optimize the preamp input according to your guitar pickup type, you can set Piezo or Magnetic for better signal processing. And it has the FX Loop input, you can use a TRS cable and connect any effect unit to Stageman Floor. When you push both footswitches, Stageman Floor turns into a looper pedal with 60 seconds recording capacity and unlimited overdubs.

Its also the best choice for various acoustic instruments like the violin, mandolin, banjo and many more.

Connections

Stageman Floor has all the useful input/output connections.

Product description

This metal core features in its tone lock function which will ensure preset won't change during performance by disabling knobs function. True bypass design minimizes loss of tone. Get one and rock it. Diagram of Metal Core: 1.Power in 2.Gain knob: Control the gain of metal 3.Bass knob: Adjust the bass of metal 4.Out jack: Connect core to guitar's amp 5.On / Off switch 6.Tone lock & variable toggle switch: Select Voice 1 or Voice 2; freeze current by switching it to middle position 7.Level knob: Control the level of metal 8.Treble knob: Adjust the treble of metal 9.Indicator LED: Indicate status of effect - On / Off 10.Input jack: Connect core to guitar Specifications: Presets: 1 storable user preset Sampling frequency: 44.1 kHz A/D converter: 24-bit Signal processing: 32-bit Frequency response: 20Hz-20000Hz ±1dB THD+N: 93dBu (<0.003%) A-Weighting Dynamic range: 100dB Input: -20dBV 1M? Output: -10dBV (output load impedance of 10k?or more) Power: 9V DC (9V Battery or ACD-007A Adapter)(neither included) Product size: 12.1 * 6.5 * 3.3cm/ 4.8 * 2.6 * 1.3in Product weight: 293g / 10.3oz Package size: 12.9 * 9.5 * 5.9cm / 5.1 * 3.7 * 2.3in Package weight: 348g / 12.3oz Package List: 1 * Metal Core 1 * User Manual(English & Chinese)

• Value not found

Product features

Metal Core Deluxe

Key Features:

Guitar Effects Stompbox with Built In Noise Gate

Metal Core Deluxe is a digital distortion pedal that offers you ultimate metal guitar tone! The new algorithm with NUX original TSAC Technology nails the tone from extremely hard pushed tube amplifiers.

With its two metal voices and sensitive EQ, you are able to get the tone for old school metal or modern metal with tight low end. Its built in Noise Reduction keeps the pedal quiet even at very high gain setting.

Product description

Features: 1) Up to 6 hours recording time. 2) Mono or stereo recording (stereo input only via aux-in jack). 3) 99 user memories. 4) 40 built-in drum patterns with tap tempo. 5) Change the playback tempo of your recorded phrases without changing the key. 6) The recorded phrases can be input into and backup in your pc. 7) Aluminum alloy housing, good durability. 8) Durable jacks and foot switch. 9) Powered by 9V batteries or AC adapter.

• Record and overdub as many layers as you need;up to 6 hours recording time;mono or stereo recording
• 99 user memories;built-in drum patterns with tap tempo
• Change the playback tempo of your recorded phrases without changing the key
• Switching phrases without latency;Extensional pedal (optional) for more control
• Import and backup phrases with pc;runs on batteries and ac adaptor

User questions & answers

Question:	Does the aux in save to stereo? I have a jam man solo xt with aux in and it converts to mono
Answer:	Yes you can, but you need to mic the guitar first in order to input sound into the pedal, otherwise the pedal will not record as it does not have an embedded mic.
Question:	Can the nux loop core unit use Nimh recahargable batteries, can it work with a Mac, does it use wave files
Answer:	absolutely. You probably figured this out already, but for anyone with the same question, put your multi pedal first if you want the effects to be loopable, and run the cable off the Nux into the input of the amp. If you have an effect loop amp you are in luck, because you can run your multipedal into the front of the amp and the looper in the effect loop. This way you can turn off all your effects, or only turn on certain ones, play a loop that way and keep it clean or only affected by what you want, then change the settings on the amp or whatever, and play over the top of the still unchanged loop with the new settings. You can only do this if you use the ME20 for all your effects. If you try to run effects etc on both the amp and the pedal, when you change your amp settings you affect everything. Run your amp on a clean setting for stuff like this. If you run everything into the front of the amp (no effect loop amp, for example) you have a problem then with your loops changing every time you change settings on the amp unless you keep the amp clean always, OR only use amp effects and no use the multi pedal for that song/songs. Its a bit mind boggling at first. It took me a while to get my head around it all with cables and pedals and what signal goes where in the amp (or not). My suggestion is that if you have an amp with effects, use those first and not a multi pedal or effect pedals. If you have pedals, run the amp clean and use the pedals. Its only when you try to combine the two that it starts to get confusing! Then, ye old trial and error is your friend.
Question:	can you use with a non electric acoustical guitar
Answer:	Probably no. It does not have a MIDI interface, which would be useful when recording.
Question:	I have a boss me - 20 pedal, could you connect each other? i mean, could you connect the nux looper with others brands? thank you
Answer:	Yes it does come with an ac adapter!

Product features

Nux Loop Core Pedal

Loop Core allows you to record and create music phases and play back as loops.

Whether you practice, compose or play live gigs, you will inspired by the well-considered functions.

Solo Artist and producer

Build-in Drum machine with 40 patterns drives you play with the gear, The drum rhythm's are really helpful to strum along with, Operation is simple- adding and deleting layers was easy to learn and being able to save loops.

Compact size but powerful

Maximum 6 hours recording time and unlimited layers of overdubs, provide you powerful energy to compose your own music.

Save your recordings to Computer.

You can even connect a microphone to the ‘Aux in’ and record yourself singing along with your strumming and drums. Save your recordings to one of the 99 empty slots or save it to your computer by USB port.