11 best loading dock bumpers
Loading dock bumpers are essential components in the realm of Material Handling Products, specifically in the Industrial Scientific field. These bumpers serve a critical role in safeguarding loading docks, buildings, and vehicles during the loading and unloading of goods. Here is what you should know about them:
Purpose: Loading dock bumpers are designed to absorb and dissipate the impact energy generated during the loading and unloading of trucks and trailers at a loading dock. They act as a buffer between the vehicle and the building or loading dock, protecting both from damage.
Types: There are several types of loading dock bumpers available, including laminated bumpers, molded bumpers, and extruded bumpers. Each type is constructed using different materials and offers varying degrees of durability and impact resistance.
Materials: Loading dock bumpers are typically made from materials such as rubber, foam, or polyurethane. The choice of material depends on factors like the expected level of impact, weather conditions, and the specific application.
Installation: These bumpers are mounted on the face of the loading dock or on the vehicle restraint system.They are typically attached using mounting plates and anchor bolts. Proper installation is crucial to ensure their effectiveness.
Size and Design: Loading dock bumpers come in various sizes and designs to accommodate different types of vehicles, from small delivery trucks to large semi-trailers. Some bumpers are equipped with reflective strips to improve visibility in low-light conditions.
Durability: They are built to withstand repeated impacts, making them durable and long-lasting. However, their lifespan can vary based on factors such as the frequency and severity of impacts.
Protection: Loading dock bumpers protect not only the building but also the vehicles and goods being transported. They reduce the risk of structural damage and minimize the chances of injury to workers or damage to cargo.
Regulations: Depending on the industry and location, there may be regulations or guidelines governing the use of loading dock bumpers to ensure safety and compliance.
Cost: The cost of loading dock bumpers can vary depending on their type, material, and size. It's important to select bumpers that are appropriate for the specific loading dock and its usage.
Maintenance: Regular inspection and maintenance of loading dock bumpers are essential to ensure they remain effective. Damaged or worn-out bumpers should be replaced promptly.
In summary, loading dock bumpers are crucial safety components in material handling and logistics, providing protection to loading docks, buildings, and vehicles. They come in various types and materials, and their proper installation and maintenance are essential for ensuring workplace safety and efficiency.
Below you can find our editor's choice of the best loading dock bumpers on the market
Vestil 1024-4.5 Horizontal Laminated Dock Bumper, Fabric Reinforced Rubber, Rectangular, 4 Holes, 10" Height, 24" Width, 4-1/2" Depth
Vestil Manufacturing Corp
Product description
- Horizontal loading dock bumper for preventing damage by a vehicle to dock or building
- 4-1/2" rubber padding for elasticity and resistance to impact
- Fabric-reinforced for strength and dimensional stability
- Steel mounting and tie rods for strength and durability
- Welds to dock or bolts to dock for easy installation
User questions & answers
| Question: | Can you confirm the weight of the dock bumper |
| Answer: | I would guess between 10 or 12 lbs. Naturally you would need it mounted to something substantial so there shouldn't be a problem with weight. |
| Question: | Can they be turned either vertical or horizontal |
| Answer: | It's meant for horizontal, but i don't see why it wouldn't work vertical. |
| Question: | What are the measurements for the bolt holes? Side to side and up and down |
| Answer: | 6” vertical 24” horizontal Bolt size approx 5/8-3/4” diameter. |
BISupply Loading Dock Bumpers Dock Edge Bumper Rubber Trailer Bumper, Dock Rub Rail Rubber Bumper – 13in x 12in 1pk
BISupply
- PROTECT YOUR BUSINESS: The BISupply | Loading Dock Bumper Guards Rubber Dock Bumper 1-Pack is a rubber wall bumper that protects your loading dock and trailer from damage as it absorbs impact for a clean, neat, and attractive dock area
- KEEP WALLS SAFE FROM FORKLIFTS: Add this trailer rubber bumper pads guard to your warehouse walls for protection against forklifts and other material-handling vehicles in light traffic truck door loading dock areas
- PERFECT SIZE: 13-inch x 12-inch (33cm x 30.5cm) truck dock bumpers guard size with a 4-inch (10.2cm) thickness to provide maximum cushion for your property
- EASILY INSTALL: Pre-drilled 3/4-inch (1.9cm) countersunk mounting holes to accept 3/4-inch anchor bolts (mounting hardware not included); Each hole has a 1-inch (2.5cm) diameter with a 7.25-inch (18.4cm) distance between holes on the 13-inch long side and a 9.4-inch (23.9cm) distance between holes on the 12-inch short side (measured from center to center); Trailer bumper pads guard has an overall 4-inch (10.2cm) thickness with holes recessed 2 inches (5.1cm)
- BUILT TO LAST: Molded from a single piece of solid rubber for medium-duty applications; Maximum strength and longevity that will not warp, rot, or rust in any weather condition; 2-inch diameter x 2.5-inch deep (5.1cm x 6.4cm) holes on back side of dock guard allow for added grip and weather resistance without slippage
Vestil B-1213-4 Rubber Molded Dock Bumper, Rectangular, 13" Height, 12" Width, 4" Depth
Vestil Manufacturing Corp
Product description
- Loading dock bumper for preventing damage by a vehicle to dock or building
- 4" rubber padding for elasticity and resistance to impact
- Fabric-reinforced with nylon and polyester for strength and dimensional stability
- Pre-drilled countersunk mounting holes for easy installation
- Accepts 3/4" anchor bolts
User questions & answers
| Question: | Would be nice to know the measurements of C/L of holes |
| Answer: | 9 3/8" wide6 5/16 hight |
| Question: | what is the distance between the centers of the holes, and is it solid for all 2" depth in the back |
| Answer: | The holes are 8 inches apart. This is a solid piece of rubber. Thank you. |
| Question: | how absorbent is it? I'm thinking of using it on my dock in front of my jet ski floats. If someone comes in to fast they will bump the dock and damage |
| Answer: | I use it on my dock to protect the dock from pontoons. It isn't absorbant. Works great for dock protection. I installed them three years ago and they work great. Installed them on my neighbor's dock last year. |
Vestil 1224-4.5 Horizontal Laminated Dock Bumper, Fabric Reinforced Rubber, Rectangular, 4 Holes, 12" Height, 24" Width, 4.5" Depth
Vestil Manufacturing Corp
Product description
- Horizontal loading dock bumper for preventing damage by a vehicle to dock or building
- 4-1/2" rubber padding for elasticity and resistance to impact
- Fabric-reinforced for strength and dimensional stability
- Steel mounting and tie rods for strength and durability
- Welds to dock or bolts to dock for easy installation
Steel Faced Rubber Dock Bumper, Rectangular, Laminated, Vertical Mount, Flat Plate Both Sides, 20" Length, 11" Width, 8" Depth
Ideal Warehouse Innovations, Inc.
Product description
For protecting above low docks. Rub rails at the sides of truck wells. Special construction features to accommodate unusual anchoring conditions (i.e. flat plate on one side to weld to dock leveler curb angle.) Wall bumpers to protect against fork lift trucks. Fabric reinforced rubber pads cut from recycled truck tires. Rubber pads laminated between structural angles and secured with 3/4" rods. Manufactured under pressure exceeding 1,500 lbs. to absorb over 80 percent of the impact. 3/8" thick angles or flat plate are closed on each end with 3/4" tie rod. Anchor leg of angle extends a minimum of 3" beyond the rubber surface at either end and contains 2 or 3-3/4" anchor bolt holes as required (anchor bolts are not supplied) - finish for exposed metal parts is black shop primer.
- 8" Projection
- P2 denotes flat plate both sides
- Designed for use at medium to high traffic loading docks
- Can be used in factories, warehouses, docks
- Covered by a 1 year limited warranty
LUVERNE 2090616-2 20-Inch Universal Rubber Bumper Guard Protector Strips Loading Dock Rear Fender Pad Bump Stop, 2-Pack
LUVERNE
Product description
LUVERNE rear rubber bumper protectors are ideal for work vans, delivery vans, trailers and commercial trucks that frequently back into loading areas or work spaces. The 2-1/8-inch x 1-7/8-inch x 20-inch long rubber bumper strips help protect the vehicle's rear bumper, rear step, sides or even the front bumper. They are intended to be universal rubber bumper guards, featuring three pre-drilled holes to accept 1/4-inch hardware. Mounting hardware is not included with this package, and drilling into the attachment surface may be required for proper installation.
- EXTRA PROTECTION. These rubber bumper strips increase protection on your delivery van, work truck and a variety of commercial vehicles, as well as trailers
- TOUGH RUBBER. The rear bumper protector rubber is a tough black rubber to withstand bumps and abrasions from a loading dock, guard rail or pylon
- VERSATILE. These rubber bumper guards are great for protecting the rear bumper, front bumper, rear step and sides
- UNIVERSAL FIT. These rubber bumper protectors are 2-1/8 inches x 1-7/8 inches x 20 inches and can be mounted anywhere needed
- HARDWARE NOT INCLUDED. The three holes in each bumper come ready to accept 1/4-inch hardware (not included). Drilling may be needed on the mounting surface
Product features
LUVERNE Rear Cargo Van Steps
LUVERNE rear work van running boards are the ideal accessory for work vans, commercial vans, delivery trucks and other cargo vans. With a vehicle-specific design, LUVERNE rear steps mount onto the back of your cargo van and provide a 54-inch wide step for easier, safer access to the rear trunk and cargo area.
LUVERNE cargo van rear steps are available in multiple styles to perfectly match the attitude and needs of your business.
Dependable safety
LUVERNE rear van running boards offer a professional level of safety, providing a solid step at the rear of the cargo van. Each style of rear step is equipped with a non-skid surface to lock onto your boot and allow you to remain fully focused on the job.
Ergonomic access
Each LUVERNE rear step for cargo vans provides a 54-inch wide stepping surface that gives you easier access into the cargo area. This is perfect for work vans and jobs that require frequent entry and exit to access equipment, materials or packages.
Van-specific design
All LUVERNE rear van steps bolt onto the cargo van frame with vehicle-specific brackets and hardware. This ensures the easiest possible installation and the best integration with the existing layout of the vehicle.
Grip Step rear steps
These cargo van rear steps are constructed from durable, lightweight aluminum and feature expanded metal treads for unparalleled traction. The aluminum treads are long-lasting and allow dirt and debris to pass through, keeping the inside of your work van cleaner. Grip Step rear steps also come with a black powder coat finish for maximum corrosion resistance.
MegaStep rear steps
These rear van steps feature a dual construction of aluminum with a polished stainless steel trim piece. They are equipped with a full-length rubber tread that provides exceptional non-skid traction compared to plastic alternatives. MegaStep rear steps offer the safety and durability of professional-grade running boards with the style of classic nerf bars.
O-Mega II rear steps
These rear work van steps are constructed from aluminum, featuring aluminum running boards and aluminum step pads, making them lightweight, long-lasting and highly corrosion-resistant. O-Mega II rear steps provide dependable traction with raised aluminum treads, and they are available in two finish options to perfectly suit the look of your cargo van.
Vestil V-1130-6 Rubber Vertical Laminated Dock Bumper, 11" Width, 30" Height, 6" Depth
Vestil Manufacturing Corp
Product description
- Vertical loading dock bumper for preventing damage by a vehicle to dock or building
- 6" rubber padding for elasticity and resistance to impact
- Fabric-reinforced for strength and dimensional stability
- Steel mounting and tie rods for strength and durability
- Welds to dock or bolts to dock for easy installation
User questions & answers
| Question: | is it 6" in depth or |
| Answer: | It is a 6 inch depth |
Vestil L-1818-4 L-Shaped Specialty Molded Dock Bumper, Rubber, 18" Width x 18" Height x 4" Depth
Vestil Manufacturing Corp
Product description
- Loading dock bumper for preventing damage by a vehicle to dock or building
- 4" rubber padding for elasticity and resistance to impact
- Fabric-reinforced with nylon and polyester for strength and dimensional stability
- Plastic face for protection
- Pre-drilled countersunk mounting holes for easy installation
Vestil B-1213-4PF Rubber Molded Dock Bumper, Plastic Face, Rectangular, 13" Height, 12" Width, 4" Depth
Vestil Manufacturing Corp
Product description
- Loading dock bumper for preventing damage by a vehicle to dock or building
- 4" rubber padding for elasticity and resistance to impact
- Fabric-reinforced with nylon and polyester for strength and dimensional stability
- Plastic face for protection
- Pre-drilled countersunk mounting holes for easy installation
Vestil 1214-4.5F Horizontal Laminated Dock Bumper, Fabric Reinforced Rubber, Rectangular, Flat Plate One Side, 2 Holes, 12" Length, 14" Width, 4-1/2" Depth
Vestil Manufacturing Corp
Product description
Laminated style dock bumper provide durable, economical protection for your loading dock and trailers. Units are constructed of fabric reinforced rubber from recycled truck tires. Pads are laminated between painted structural angles and held together with 3/4" steel tie rods. Installation is quick and easy by bolting or welding units to dock. Width is bolt hole center to bolt hole center. Bolt holes are 13/16" in diameter. Dock bumper measures 14" width by 12" height by 4.5" projection.
- Manufactured with laminated sheets of rubber compressed between steel angles for strength and durability
- Designed for use on loading docks to protect trailers and dock area
- Bolt or weld bumper to the dock for quick and easy installation
- Made from recycled truck tires for long lasting use
Durable - M-DB13 Corporation Rubber Molded Bumper, Rectangular, Horizontal Mount, 2 Holes, 13" Length, 10" Width, 4-1/2" Depth
Durable Corporation
Product description
On January 24, 1923 P.J. Swanson and Chas. T. Lyons formed the Tire Mat and Bi-Products Company, Inc. to capitalize on the patent filed by P.J. Swanson for the invention of the tire-link mat. In July of 1924, Chas. T. Lyons, H.W. Bell and Howard R. Lyons formed a successor company called Durable Mat Company, Inc. and were shortly joined by C.L. Morris and Falcon Joslin, whom jointly comprised the management team that would established what is today Durable Corporation. Molded Rubber Loading Dock Bumpers are ideal for light traffic loading docks. Molded rubber loading dock bumpers provide great protection for any low traffic truck door. Molded bumpers are molded in one piece. Perfect protection for any low traffic truck door and in-plant wall protection from forklifts and other material handling vehicles. Makes for a clean, neat, attractive dock area. Molded in one piece and will not warp, rust, rot or harden. Compact size and immune to all weather applications.
- Medium duty wall protection
- Fabric reinforced high quality rubber compound
- Easy to install
- No maintenance
- Multiple sizes
User questions & answers
| Question: | Is this price each or do they come in a pair |
| Answer: | They are sold separately. The price is for (1). |
| Question: | How far apart are the bolt holes, center to center |
| Answer: | 7" CENTER |
Product features
Molded Rubber Dock Bumper
Molded Rubber Loading Dock Bumpers are ideal for light traffic loading docks. Molded rubber loading dock bumpers provide great protection for any low traffic truck door. Molded bumpers are molded in one piece. Perfect protection for any low traffic truck door and in-plant wall protection from forklifts and other material handling vehicles. Makes for a clean, neat, attractive dock area. Molded in one piece and will not warp, rust, rot or harden. Compact size and immune to all weather applications.
Durable Dock Bumpers
Durable manufactures a variety of premium loading dock bumpers that help protect your business. Our dock bumpers are shown to absorb over 80% of impact, providing plenty of cushion for your property.
Since every dock is different, Durable provides many different types of rubber dock bumpers in varying thicknesses. Each are designed with different benefits, from styles designed for heavy traffic to one-piece units for lighter conditions, allowing you to choose which option is best for your facilities. If you need help deciding which Durable dock bumpers would be best, our experts can help you order the right options for your business.
Latest Reviews
View all
Tape Measure With Rubber Jackets
- Updated: 26.06.2023
- Read reviews
Miniature Trumpets
- Updated: 15.06.2023
- Read reviews
Pail Refills
- Updated: 13.07.2023
- Read reviews
Exell Battery Rv Deep Cycle Batteries
- Updated: 13.06.2023
- Read reviews
Athena Changing Tables
- Updated: 19.04.2023
- Read reviews