14 best square nose end mills
Square nose end mills are cutting tools commonly used in machining and milling operations, especially in industrial and manufacturing settings.Here's what you need to know about square nose end mills:
Basic Design: Square nose end mills have a flat, square-shaped cutting end, which is often referred to as the "nose." This design allows them to create flat-bottomed grooves, slots, and pockets in a workpiece.
Material: These end mills are typically made from high-speed steel (HSS), cobalt, or carbide. Carbide square nose end mills are preferred for their durability and ability to cut through tough materials.
Cutting Applications: Square nose end mills are versatile tools used for a wide range of cutting tasks, including contouring, profiling, plunging, and slotting. They are suitable for cutting both ferrous and non-ferrous materials.
Cutting Geometry: The cutting edges of square nose end mills are sharp and perpendicular to the tool's axis. This geometry is ideal for creating square or flat-bottomed features in a workpiece.
Flutes: These end mills come with a varying number of flutes, which are the spiral or helical channels that help remove chips and coolant from the cutting area. Common options include two-flute and four-flute square nose end mills.
Coatings: Some square nose end mills come with specialized coatings like TiN (Titanium Nitride) or TiAlN (Titanium Aluminum Nitride) to improve tool life and performance by reducing friction and wear.
Shank Types: Square nose end mills are available with various shank types, including straight shank and tapered shank options. The choice of shank type depends on the specific milling machine and application.
Diameter and Length: These end mills come in a range of diameters and lengths, allowing machinists to select the appropriate size for their cutting needs.
Cutting Speed and Feed Rate: The cutting speed and feed rate for square nose end mills depend on the material being machined, tool material, and the specific machining operation. Proper selection and adjustment of these parameters are crucial for achieving optimal results.
Safety: When using square nose end mills, operators should follow safety guidelines and wear appropriate personal protective equipment (PPE) to prevent injury.
Square nose end mills are essential tools in metalworking and machining applications, and their versatility makes them suitable for various tasks. Machinists and manufacturers choose the right square nose end mill based on factors such as the material being worked on, the desired finish, and the machining equipment being used.
Below you can find our editor's choice of the best square nose end mills on the market
Niagara Cutter N88620 Cobalt Steel Square Nose End Mill, Inch, Weldon Shank, TiCN Finish, Finishing Cut, 30 Degree Helix, 4 Flutes, 3.6875" Overall Length, 0.438" Cutting Diameter, 0.375" Shank Diameter
Niagara Cutter
Product description
The Niagara Cutter SPC408 TiCN-coated cobalt steel square nose end mill has a 30-degree helix angle for milling a wide range of materials, including high-temperature alloys. The number of flutes varies; fewer flutes provide better chip-carrying capacity, while more flutes produce a finer finish. The TiCN coating offers increased hardness and greater abrasion resistance than uncoated or TiN-coated tools. The cobalt steel substrate can be run at faster speeds and stays sharp longer than high-speed steel tools, while offering greater resistance to heat and abrasion.
The 30-degree helix angle supports general-purpose applications. It balances lower angles’ strong cutting edge for difficult-to-machine materials with higher angles’ increased cutting action. The tool’s square end has straight cutting edges that create sharp, unrounded cuts, while the center-cutting design has cutting teeth at the end of the tool that support making pocket cuts, profiling, and slotting. Cutting diameter tolerance is +0.001” to -0.000”. The end mill has a Weldon shank.
End mills are designed to remove material and create multi-dimensional shapes and profiles. They have cutting edges along the outside diameter and flutes that remove chips from the cutting area and allow cooling fluids to enter. If heat is not reduced effectively, the tool’s cutting edges will dull and additional material buildup can occur. The number of flutes can range from two to eight. Two-flute designs offer the most efficient chip removal, but more flutes provide a smoother finish. The shank is the end of the tool held in place by a tool holder or machine. Center-cutting end mills can create three-dimensional shapes and profiles, and make plunge cuts similar to a drill bit. Non-center-cutting end mills are for applications such as peripheral milling and finishing, but cannot make plunge cuts.
Niagara Cutter has been designing and manufacturing precision cutting tools since 1954. Specializing in end mills, cutting mills, and saws, the company is based in New York and manufactures its tools at facilities in Pennsylvania and Massachusetts. This allows the company control over production, from substrate to coating, which is essential for customers in a variety of industries, especially aerospace and automotive.
- Number of flutes varies; fewer flutes have more chip-carrying capacity and more flutes produce a finer finish
- Titanium carbon nitride (TiCN) coating lubricates the end mill for high-temperature stability and offers better abrasion resistance than TiN coating
- Cobalt steel resists abrasion and high cutting temperatures, and has higher feed rates than high-speed steel
- Square nose end mills (also called square end) create sharp, unrounded cuts
- Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling
SpeTool 12411 4 Flutes Carbide CNC Square Nose End Mill, 1/4 inch Shank Diameter, 3 inch Long, Upcut CNC Router Bit with Coated
SpeTool
Product description
Solid Carbide Spiral Router Bit with 1/4 inch Shank and 1/4 inch Cutting Diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length;
Flat Top with 4-Flute, Material: HRC55 Carbide with TiAlN Coated;
For CNC,Engraving Machine. Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc;
The Route Bit Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet;
End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc.
YG-1 - 55901 E5065 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 6" Overall Length, 0.25" Cutting Diameter, 0.25" Shank Diameter
YG-1 Tool Company
Product description
- Suitable for general-purpose machining on hardened and high-alloy steel, steel casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic
- Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills
- Four flutes produce a better finish than fewer flutes
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials
6Pack 1/8",1/4",3/16",5/16",3/8",1/2" inch Imperial Units High Speed Steel HSS 4 Flute Straight Shank Square Nose End Mill Cutter
Product description
Material: HSS Flute, Straight Shank, Square Nose Suitable for aluminium, cast iron, copper, magnesium alioy, plastics, wood etc Square Nose Endmills Size: 1/8'' Cutter:Blade Diameter=1/8'', Shank Diameter=1/4'', Flute Length=7/16'', Overall Length=2-3/8''; 3/16'' Cutter:Blade Diameter=3/16'', Shank Diameter=1/4'', Flute Length=9/16'', Overall Length=2-3/8''; 1/4'' Cutter:Blade Diameter=1/4'', Shank Diameter=1/4'', Flute Length=3/4'', Overall Length=2-1/2''; 5/16'' Cutter:Blade Diameter=5/16'', Shank Diameter=5/16'''', Flute Length=7/8'', Overall Length=2-5/8''; 3/8'' Cutter:Blade Diameter=3/8'', Shank Diameter=3/8'', Flute Length=1'', Overall Length=2-3/4''; 1/2'' Cutter:Blade Diameter=1/2'', Shank Diameter=1/2'', Flute Length=1-1/2'',Overall Length=3-3/8''. Note: Due to the different measurement methods, the size may have 1-2mm error. Package includes: 6 x End Mill Cutter
- 1.Four flutes produce a better finish than fewer flutes.
- 2.Material: HSS ; Imperial Units, not Metric .
- 3.One Set of end mill bits Including: 6 Different kinds of Inch Size:1/8",1/4",3/16",5/16",3/8",1/2" end mills to meet your need,
- 4.Hardness of metal for above HRC 45 degrees,with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications.
- 5.End mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc.
User questions & answers
| Question: | Is there a breakage warranty on these cutters |
| Answer: | You’d have to check with the manufacturer. |
SpeTool 5PCS 2 Flutes Square Nose End Mill Set Carbide Upcut CNC Router Bits Tiain Coated, 1/4 inch Shank, 2 1/2 inches Long Overall
SpeTool
Product description
Solid Carbide Spiral Router Bit with 1/4 inch Shank and 1/4 inch Cutting Diameter, 3/4 inch Cutting Length, 2-1/2 inch for Total Length;
Flat Top with 2-Flute, Material: HRC55 Carbide with TiAlN Coated;
For CNC, Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc;
The Route Bit Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet;
End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc.
- Solid Carbide Spiral Router Bit with 1/4 inch Shank and 1/4 inch Cutting Diameter, 3/4 inch Cutting Length, 2-1/2 inch for Total Length
- Flat Top with 2-Flute, Material: Solid Carbide with TiAlN Coated for HRC 55
- For CNC Machine.Cutting Steel, Metal, Inconel, Stainless Steel, Titanium Alloy etc
- The Route Bit Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet
- End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc.
User questions & answers
| Question: | what is the quantity 1 or 5 as in the picture |
| Answer: | This would depend on many variables, including the type of plywood, depth of cut and RPM. I have used 10 cm per minute without issues, but your performance may differ. |
SPEED TIGER IAE5 Carbide Square Nose End Mill with ZrN Coating for Aluminum Applications - 2 Flute - IAE5-5/16"2T-ZrN - Made in Taiwan (5 Pieces, 5/16")
SPEED TIGER
Product description
Before you buy: Speed Tiger end mills require correct spindle speed / feed rate for best performance and to avoid breakage. Contact the seller for more info.
Speed Tiger IAE5 2-Flute Series
Square nose end mills with ZrN coating for excellent wear resistance. Fractional sizing.
Specification
Cutting Diameter: 5/16", Cutting Length: 5/8", Shank Diameter: 5/16", Full Length: 2-1/2”, 5pcs/package
SPEED TIGER PRECISION TECHNOLOGY CO., LTD. stands for High-Quality
Established in 1998, Speed Tiger specializes in the production of precision carbide end mills, inserts, and other tungsten carbide steel cutting tools. Speed Tiger crafts cutting tool at nanometer precision. The world's highest precision, ±2μm, enables users to achieve unsurpassed cutting quality and performance.
Advanced Production Facilities & Technology - Speed Tiger has 73 sets of grinding machines from Germany, Switzerland, Japan and Taiwan.
Professional Coating Facilities & Technology - Speed Tiger has its own coating facilities with equipment from Ionbond and Platit of Switzerland. This gives Speed Tiger the ability to develop specialized coatings based on customer requirements.
Precise Quality Control Policy - From raw materials to finished products, Speed Tiger insists on a strict inspection policy to make sure every product consistently meets exacting quality standards.
Identity Number - Speed Tiger created the End Mills Traceability System in order to ensure the accountability of each process participant. Each end mill has its own identity number on its shank.
- EXTRA DURABLE - Zirconium Nitride (ZrN) coatings improve wear and effectively reduce built-up edges when machining
- SUPERIOR CUTTING CHARACTERISTICS - Maintain excellent surface finish cut after cut
- MULTI-FUNCTIONAL - For roughing and finishing
- MADE IN TAIWAN - Superior quality control means great cutting performance every time
- QUALITY CONTROL - Flutes ground in a world-class ISO-9001 factory on equipment from industry leading manufacturers
SpeTool 2 Flutes 1/4 inch Shank, Extra Long(3 inches) Carbide End Mill TiAlN Coated HRC55 Spiral UpCut CNC Bits
SpeTool
Product description
Solid Carbide Spiral Router Bit with 1/4 inch Shank and 1/4 inch Cutting Diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length;
Flat Top with 2-Flute, Material: HRC55 Carbide with TiAlN Coated;
For CNC, Engraving Machine. Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc;
The Route Bit Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet;
End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc.
CGC Tools CEM14F3 Primate Square Nose End Mill, 3 Flute, 1/4" Diameter, 3/4" LOC, 2-1/2" OAL
Product description
"WEAPONS OF MASS PRODUCTION" Like their uglier cousins the "Gorilla Mills", Primate are standard 2, 3 and 4 flute carbide end mills recommended for machining applications in all materials. Primates have an emphasis on be very cost effective but are still GMP Edge Prepped to hone the cutting edge in a controlled environment to reduce the fracturing that occurs to the cutting edge during the milling process while greatly increasing tool life and enhancing finish. Completely resharpenable, and can be run dry or wet.
Gorilla Mill end mills and cutting tools and Gorilla Drills are manufactured and sharpened at our North American plant outside of Milwaukee, Wisconsin. Our modern facility has been producing and sharpening cutting tools for the aerospace, automotive, medical and manufacturing industries for well over 30 years. The marketplace is overwhelmed with variable helix end mills. Like the Gorilla Mill, some are patented, most are not. One thing that matters most is performance in the machine tools. Gorilla Mills will reduce chatter, decrease cycle times, extend tool life and create a superior tolerance and finish. Prepare for battle. Make sure there's a Gorilla Mill on board.
- USA, Flat, 3 Flute, 1/4'' Diameter, 3/4'' Length of Cut, 2-1/2'' Overall Length
- Highest Transverse Rupture Strength (TRS) nano-grain carbide substrate available and completely resharpenable
- Extremely versatile in various materials, center cutting, solid sub-micron carbide
- GMP Edge Prepped to hone the "ridges" to reduce fracturing during the milling process while greatly increasing tool life and enhancing finish
- This weapon of mass production destroy any competition
User questions & answers
| Question: | I need to mill a bolt end that broke and is naturally ragged/uneven now. No way to drill until the surface is flat. Will this work for that |
| Answer: | If you are planning on chucking this in a hand drill to try and cut the top of a ragged bolt flat I would advise against it. Endmills are made of extremely hard material that is also brittle. They are made to cut secured pieces at small increments (vibration excess force can cause blades to chip). Use a punch to make a center point and start with a small drill slowly to drill out bolt. |
| Question: | Would this work on hardened D2 steel |
| Answer: | Just pay attention to speed and feed rates for this material. I would also begin with very light cuts to avoid premature cutter wear. |
| Question: | The pack 2 is this ten enmills |
| Answer: | Looks like you can buy a single one, or a two-pack (2 end mills). |
CGC Tools CEM14F3TIALN Primate Square Nose End Mill, TiAlN Coating, 3 Flute, 1/4" Diameter, 3/4" LOC, 2-1/2" OAL
CGC Gorilla Mill
Product description
"WEAPONS OF MASS PRODUCTION" Like their uglier cousins the "Gorilla Mills", Primate are standard 2, 3 and 4 flute carbide end mills recommended for machining applications in all materials. Primates have an emphasis on be very cost effective but are still GMP Edge Prepped to hone the cutting edge in a controlled environment to reduce the fracturing that occurs to the cutting edge during the milling process while greatly increasing tool life and enhancing finish. Completely resharpenable, and can be run dry or wet.
Gorilla Mill end mills and cutting tools and Gorilla Drills are manufactured and sharpened at our North American plant outside of Milwaukee, Wisconsin. Our modern facility has been producing and sharpening cutting tools for the aerospace, automotive, medical and manufacturing industries for well over 30 years. The marketplace is overwhelmed with variable helix end mills. Like the Gorilla Mill, some are patented, most are not. One thing that matters most is performance in the machine tools. Gorilla Mills will reduce chatter, decrease cycle times, extend tool life and create a superior tolerance and finish. Prepare for battle. Make sure there's a Gorilla Mill on board.
Niagara Cutter - C330-0.375-D3-S.0-Z3 N86018 Carbide Square Nose End Mill, Inch, TiAlN Finish, Roughing and Finishing Cut, 30 Degree Helix, 3 Flutes, 2.5" Overall Length, 0.375" Cutting Diameter, 0.375" Shank Diameter
Niagara Cutter
Product description
The Niagara Cutter C330 TiAlN-coated carbide square nose end mill has three flutes and a 30-degree helix angle for general-purpose machining on a range of materials. The tool’s square end creates sharp, unrounded cuts, and the center-cutting design has cutting teeth at the end of the tool, so it can be fed into the workpiece like a drill bit. The end mill’s three flutes provide better chip-carrying capacity than four flutes and a finer finish than two. They efficiently remove excess material from the cutting area and provide a third cutting edge to create an improved finish that may eliminate the need for a second finishing cut in some applications. The 30-degree helix angle supports general-purpose applications. It balances lower angles’ strong cutting edge for difficult-to-machine materials with higher angles’ increased cutting action.
The TiAlN coating resists heat better than TiN and TiCN coatings, increasing tool life and performance. It also offers increased hardness for abrasion resistance and may reduce the need for lubricants based on the application. (TiAlN is suitable for a range of materials, but TiCN or uncoated end mills are recommended for machining aluminum.) The carbide substrate is harder than high-speed or cobalt steel, making it more wear resistant at high speeds and providing longer tool life. Cutting diameter tolerance is +0.000” to -0.002”. The round shank accommodates a variety of holders.
End mills are designed to remove material and create multi-dimensional shapes and profiles. They have cutting edges along the outside diameter and flutes that remove chips from the cutting area and allow cooling fluids to enter. If heat is not reduced effectively, the tool’s cutting edges will dull and additional material buildup can occur. The number of flutes can range from two to eight. Two-flute designs offer the most efficient chip removal, but more flutes provide a smoother finish. The shank is the end of the tool held in place by a tool holder or machine. Center-cutting end mills can create three-dimensional shapes and profiles, and make plunge cuts similar to a drill bit. Non-center-cutting end mills are for applications such as peripheral milling and finishing, but cannot make plunge cuts.
Niagara Cutter has been designing and manufacturing precision cutting tools since 1954. Specializing in end mills, cutting mills, and saws, the company is based in New York and manufactures its tools at facilities in Pennsylvania and Massachusetts. This allows the company control over production, from substrate to coating, which is essential for customers in a variety of industries, especially aerospace and automotive.
- Three flutes provide better chip-carrying capacity than four flutes and a finer finish than two, reducing the need for a second finishing cut in some applications
- Square nose end mills (also called square end) create sharp, unrounded cuts
- Titanium aluminum nitride (TiAlN) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds, offering better heat resistance than TiN and TiCN coatings
- Carbide can run at higher speeds than high-speed steel, resisting abrasion and high cutting temperatures
- Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling
User questions & answers
| Question: | Work well on aircraft aluminum |
| Answer: | Yes...I have used this is on several projects with no complaints. |
| Question: | What is the length of cut |
| Answer: | If you're asking how deep a hole you can drill/mill then it would depend on how much of the shank you can safely hold in your drill chuck. The overall length is 2.5-inches so in my case I had 1-inch in the chuck (almost to the cutting part of the bit) and so could have gone about 1.5-inches deep. Only had to go 0.75-inches deep so this bit worked for me. If you have to go deeper, then you need to find a bit with a longer shank. |
| Question: | How would the sides hold up against 1/4 mild plate steel and what speed is recommended, I'm looking at the 1/2 inch one |
| Answer: | Slow speed |
| Question: | B003BIEUZY is listed as 1/8" shank & cutting diameter. I review detail link and appears as 0.125" shank and cutting diameter. Please check out |
| Answer: | 1/8" = 0.125". shank and cutting diameter are the same. |
YG-1 - 19055 E1072 High Speed Steel (HSS) Square Nose End Mill, Extra Long Reach, Weldon Shank, Uncoated (Bright) Finish, 42 Deg Helix, 2 Flutes, 4.25" Overall Length, 0.375" Cutting Diameter, 0.375" Shank Diameter
YG-1 Tool Company
Product description
- Suitable for machining on aluminum and other nonferrous materials
- 42-degree helix provides increased cutting action compared to end mills with lower helix angles
- Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills
- Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool’s ability to remove material
- High-speed steel for general-purpose cutting
User questions & answers
| Question: | What is the length of cut / flute length please |
| Answer: | 2.5" |
| Question: | What country is this product made? Let me know. Thanks |
| Answer: | Made in South korea |
| Question: | What is the length of cut |
| Answer: | I was able to cut 2 1/4 inches of aluminum taking it very slow. |
Jarrow Tool Carbide Square Nose End Mill for CNC Machine Milling Tools, for Alloy Steels/Hardened Metels - 4 Flute - 55HRC TiAlN Coated (1Pcs, 1/2)
JARROW TOOL
- Industrial Quality - Made with Premium Raw Materials
- Made by Japan, Switzerland, and Germany Production Machines
- Long Service Life, High Cutting Speeds, High Precision
- Suitable for Most Steel, Titanium Alloy and Heat-Resistant Alloy
- 【SPECIFICATIONS】1/2" Diam, 1-1/8" LOC, 1/2" Shank Diam, 3" OAL
Favordrory HSS 4 Flute Straight Shank Square Nose End Mill Cutter (1/16" 1/8" 5/32'' 3/16" 1/4" 5/16" 3/8" 1/2")
Favordrory
Product description
【Specifications:】
- Color: Silver
- Material: HSS
- Flute: 4 Flute End Mill Bits
- Size: 1/8''+5/32''+3/16''+1/4''+5/16''+3/8''+1/2''
【Square Nose End mills Size】
1/16'' Cutter:
Blade Diameter=1/16'', Shank Diameter=1/4'', Flute Length=9/16'', Overall Length=2-3/8''
5/32'' Cutter:
Blade Diameter=5/32'', Shank Diameter=1/4, Flute Length=1/2'', Overall Length=2-3/8''
1/8'' Cutter:
Blade Diameter=1/8'', Shank Diameter=1/4'', Flute Length=7/16'', Overall Length=2-3/8''
3/16'' Cutter:
Blade Diameter=3/16'', Shank Diameter=1/4'', Flute Length=9/16'', Overall Length=2-3/8''
1/4'' Cutter:
Blade Diameter=1/4'', Shank Diameter=1/4'', Flute Length=3/4'', Overall Length=2-1/2''
5/16'' Cutter:
Blade Diameter=5/16'', Shank Diameter=5/16'''', Flute Length=7/8'', Overall Length=2-5/8''
3/8'' Cutter:
Blade Diameter=3/8'', Shank Diameter=3/8'', Flute Length=1'', Overall Length=2-3/4''
1/2'' Cutter:
Blade Diameter=1/2'', Shank Diameter=1/2'', Flute Length=1-1/2'',Overall Length=3-3/8”
【Notes:】
1, Widely used in hardness from aluminium, cast iron, brass, copper, magnesium alloy, plastics under HRC32(HRA66),or more processing soft materials.
2, Full grinded cutter offer obtain accuracy and fine finish than other substrates.
3, Make sure work piece and machine are stable, use hydraulic chucks, high quality collet chucks or shrink fit chucks.
4, Please adjust the speed, feed and cutting depth according to actual cutting conditions.
5, Tool overhang, please use the required amount of minimum size, amount of long overhang is high vibration, turn it to lower the number of feed.
6, Adapt to several kinds of cooling conditions, for example oil mist, air cooling.
- Material: HSS, Flute: 4 Flute End Mill Bits
- Size: 1/8''+5/32''+3/16''+1/4''+5/16''+3/8''+1/2'', total 8 sizes, different sizes can meet your different needs.
- Feature: 4 Flute, full grinded, high abrasion resistance, obtain accuracy and fine finish
- Wide application: Widely used in hardness from aluminium, cast iron, brass, copper, magnesium alloy, plastics under HRC32(HRA66),or more processing soft materials., not suitable for very hard metal.
YG-1 - 54558 E5026 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, Non-Center Cutting, 30 Deg Helix, 2 Flutes, 3" Overall Length, 0.125" Cutting Diameter, 0.125" Shank Diameter
YG-1 Tool Company
Product description
- Suitable for general-purpose machining on hardened and high-alloy steel, chromium-nickel steel, steel casting, malleable cast iron, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic
- Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills
- Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool’s ability to remove material
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials
Latest Reviews
View all
Pot Soils With Controls
- Updated: 03.04.2023
- Read reviews
Tools More Bidets
- Updated: 11.05.2023
- Read reviews
Grip Gloves For Fitness Gyms
- Updated: 02.01.2023
- Read reviews
Mac Cleaner
- Updated: 06.03.2023
- Read reviews
Comet Cb Radios
- Updated: 27.02.2023
- Read reviews