14 best 3d printer mainboard

Product description

This new upgraded silent mainboard does not currently come pre-installed on our Ender 3, Ender 3 Pro, Ender 3 v2 or Ender 5 printers. At this point, the silent mainboard is a separate upgrade for all 3 Ender’s series 3D Printer.



The firmware for the Ender 3 comes pre-installed, but this mainboard works excellent for the Ender 5 as well! For Ender 5, you will need to install the.HEX file yourself.



For the Ender 3 Ender 3 Pro , you just plug them in and start printing!

• Creality new release silent motherboard V4.2.7（V4.2.2） ，32bit, compatible with Ender 3.
• Super quiet by TMC2225 drivers , Bootloader installed,copy the firmware file to a formated SD card with no other files in it. Turn off the printer and unplug the power cord. Insert the SD card & power cord, and turn on the printer. Wait 10s to complete the firmware updating process., easier to flash the firmware.
• Thermal runaway protection is enabled. The Board is Optimized by Circuit, effectively solve Heating Problem.
• Firmware comes pre-installed, pre-configured for the Ender 3, makes it totally plug & play.
• This silent mainboard preinstalls the Ender-3 firmware. If you want to install it in your Ender 3 Pro/Ender3 v2/ Ender-5, need to flash the Ender 3 Pro/Ender 3 v2/Ender5 firmware.

User questions & answers

Question:	Does this board lock the stepper motors during a filament change M
Answer:	Yes, this Artillery Genius 3D Printer has auto bed levelling port. For more detailed operation, you can check the product manual.
Question:	Why does this come shipped with Firmware 1.0.1 instead of 2.X
Answer:	The seller obviously doesn't understand your question. The power supply is 24 volt.
Question:	Is is possible to install the bigtreetech btt-tft35-e3 touch screen lcd with this
Answer:	Querido cliente, Esta impresora sólo se aplica a la electricidad de 110v.
Question:	is power interruption enabled or do you have to install Marlin 2.0.x to get that
Answer:	La impresora llegó de 110v. Con su sticker de 110v en la placa.

Product description

Product description

Aiming at the problems exist on the open sourced controller board such as Ramps 1.4, the developers in Makerbase specially optimize and develop a new product, MKS Gen L, which provides more flexible choices for users.

1.Support a variety of stepper drivers such as A4988, DRV8825, TMC2100 and LV8729, available to change the stepper drivers and motors as users like.

2.Use specific power chip, support 12V-24V power input, and resolve the problems of chip heating and power shortage.

3.Stable and reliable filter circuit greatly reduces interference and avoids crashes as possible in the process of printing.

4.Use CH340 serial port chip, more easily install the drive than 16U2.

5.Run Marlin firmware, the configuration is completely same as Ramps 1.4, and available to directly replace the Ramps 1.4.

6.Support Ramps 1.4, 2004LCD,12864LCD, TFT28 and TFT32.

7.Available to input 24V, the heated bed current can be reduced to 1/4 at the same system power which effectively resolves the problem that the MOSFET of heated bed heats.

8.The stable and reliable filter circuit greatly reduces the possibility of interference, and the most likely to avoid the phenomenon of dead machine and running in the printing process.

9.Please do not insert or pull the motor and driver under the condition of power-on, which may cause the driver to burn out. Also do not adjust the current during the operation of the motor.

10.You need first disconnect the power, remove the motor, and then re-power, adjust the potentiometer, measure the voltage on the potentiometer until the measured voltage is the same as expected. Do not insert the reverse drive, otherwise it will burn out the drive and even burn the motherboard.

Package Contents:

1 X MKS GEN L V1.0 Board

1 X USD Cable

5 X A4988 Stepper Motor Driver

5 X Heat Sink

• Integrate 2560 and Ramps1.4 one PCB,which designed to avoid complicated connections, easier wiring and more stable Use high-quality 4 layer PCB&Use special power chip,support 12V-24V, also Use Run Marlin firmware,same as configuration way as Ramps1.4, it can replace Ramps1.4 directly.
• Use high quality MOSFET tube,better cooling and more stable.Use special power chip,support 12-24V input,reduce the heated bed current to 1/4 that slove the Mosfet heat problem efficiently and power shortage.
• Support a variety of stepper drivers: A4988,DRV8825,TMC2208 and TMC2100, and available to work with LCD2004,LCD12864,MKS TFT24/28/32/35 & Available to connect external large stepp drivers, A4988 driver board widely used in 3D printers and small CNC machines.
• Support functions: Non-trace resumption after power off, run out filament ,and auto shut down, XTZ axis with different color terminal controls the motors and end stop,which is convenient to wire.Use high-quality 4 layer PCB&Use special power chip.Retail Servos,AUX-1 and AUX-2 interface of Ramps1.4 provide three 5V output and three 12V output interfaces.
• Five different step resolutions: full-step, half-step, quarter-step, eighth-step, and sixteenth-step.Adjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor's rated voltage toachieve higher step rates.Use the configuration file to set the driving current mode, avoid manual adjustment of the current to cause the burned drive, convenient, safe and reliable.

Product description

1. Why Creality Ender-3/Ender-3 Pro changed its 8-bit motherboard to 32-bit motherboard?

To better meet customers' requirements, Creality will upgrade the 8-bit motherboard to a 32-bit motherboard. The new 4.2.2 32-bit motherboard is matched with the STM32F103 master chipset and HR4988 driver chipset and supports Marlin 2.0 firmware.

The V4.2.2 motherboard is for Creality Ender series 3D printers. Later on, there will be a V4.2.7 silent motherboard sold as an accessory.

2. Are there any effects brought by the motherboard change?

The 32-bit motherboard works for the same functions as the 8-bit motherboard. In other words, it won't affect the printing performance of the machine.

3. If any firmware problems caused by the motherboard change, you can download the latest version firmware on our official website.

Ender-3 Latest Firmware for 32-bit Motherboard Download Link:

https://www.creality.com/download/32

If you have any other issues with the firmware update, please refer to our firmware flash videos available on YouTube.

Note: If you want to update the latest firmware, please check which motherboard your machine is equipped with.

If your machine comes with an 8-bit motherboard, please flash the 8-bit motherboard firmware.

If your machine comes with a 32-bit motherboard, please flash the 32-bit motherboard firmware.

Please refer to the link below to get further information about V4.2.7 silent board,

https://www.creality.com/blog-detail/ender-3-motherboard-change-notification

• Driver - TMC2208 driver & Marlin 1.1.8 for V1.1.5 board while TMC2225 driver & Marlin 2.0.1 for V4.2.7 board. Bootloader preinstalled on both version boards.
• Update Firmware - If the board you received is V1.1.5 please flash firmware with ISP cable. If the board you received is V4.2.7, please copy the firmware file to a formated SD card with no other files in it. Turn off the printer and unplug the power cord. Insert the SD card & power cord, and turn on the printer. Wait 10s to complete the firmware updating process.
• Thermal runaway protection is enabled. The Board is Optimized by Circuit, effectively solve the Heating Problem.
• Any issues or questions about our product please feel free to contact us at any time. We have professional technical Team to provide technical supports for you as soon as we can.

User questions & answers

Question:	If I choose the Ender 3 option, is this a 32bit board? First pic shows 8bit and others show 32bit
Answer:	You will need Capricorn ptfe tube as the stock ptfe tube will fail at higher temperatures. This filament is ok. I’ve had issues with delaminates now issues on taller prints even when running with no fan and lower layer heights. I recommend rain PETG.
Question:	Does this come with the ability to do auto bed leveling when the appropriate hardware is added
Answer:	Generally not that long. Literally set it outside for an hour and brought it in a dark room. Glows real well from the direct sunlight but only holds for maybe 30min. You can flashlight it if you got a powerful light to recharge the glow but it’s 30min at best.
Question:	Where can i find the pinout of the exp1 and exp2 lcd connectors
Answer:	Recommended temperature is a range from 195 to 210. I have found that printing at 205 works best for me. Just try a few prints until you find a temperature that works best for your printer.
Question:	Does this work in a Sovol SV
Answer:	It’s 1Kg or 2.2 lbs of filament the shipping weight is something like 3.2 lbs so the spool & box are about 1lb.

• 📌【Ultra Large Print&Matrix Automatic Levelling】 300x300x400mm ultra large print volume. Auto measures 25 points across the print platform for heat bed leveling. An induction sensor can probe the bed in a grid and apply mesh-based compensation that ensures you print on a level bed every time, all without the time-consuming and labor-intensive leveling tasks.
• 📌【Filament Sensor&Power Outage Recovery】 The filament sensor detects the filament end and sends reminders to the screen to avoid air-printing. Resume printing and recover from exactly where it left off. No worries about unexpected power outages.
• 📌【Auto Filament Assignment&Assembled In No Time】 Automatic load and unload the filament with just a click.Pre-assembly and modular design with quick assemble in 10min. Solid Wire Connection,Distributor connector for solid wire connections.
• 📌【Dual Z-axis, More Accurate Print&Stable Y-axis Movement】 ET5 applies dual Z-axis rods and motors to make sure the smooth and accuracy of every slight movement. Dual Y axis guideway for a more stable and level moving stage of the build platform. Intuitive Touchscreen.Colorful LCD touch screen, allowing you to control the movement of X/Y/Z axis, leveling and printing with ease.
• 📌【Safe Designed Control Board】 You can connect your ET5 online or offline to any configuration for your convenience. You could print via SD card or USB flash drive. Self-developed industrial-grade 32bit control board with MCU STMF407. Stable operation with high precision. The mother board has thermal runaway protection. If the printer fails to detect the temperature for a certain time, it would automatically power off.

User questions & answers

Question:	Can a usb cable be used to connect printer to computer printing program
Answer:	Yes, but it is not recommended. Using the micro sd card is more of a stable print with any 3d printer.
Question:	Can I upgrade the extruder to all metal? Is there somewhere I can look to get one that is compatible
Answer:	I think you can. Thought I saw a all metal extruder on Amazon
Question:	What software would I need to use this with my Mac
Answer:	Cura or simplify3D
Question:	Does it come with filament
Answer:	Sorry，this 3D printer doesn't come with filament.

Product description

☞【BIGTREETECH SKR V1.3 motherboard】 is R&D by Shen Zhen Big Tree Technology CO.,LTD. .

The BIGTREETECH SKR V1.3 motherboard not only with a high cost-effective but especially suitable for small and medium-sized 3D printers. 

※1. Support file format: g-code

※2.Supported machine architecture: XYZ, Delta, Kossel, Ultimaker, Corexy



===============================================================================

☞【TMC2130 SPI Mode】 The TMC2130 is a high performance 2-phase stepper motor driver chip with standard SPI interface and simple step / dir interface.

Very low noise, high load driver will not lose steps

===============================================================================



 ☞【TFT35 V2.0】

※1) Appearance size: 110*60mm

※2) Installation size: 105*55mm

※3) Microprocessor: ARM Cortex-M3 CPU

※4) Power interface: DC5V TFT3.5 V2.0 After the main board is powered on, the D3 blue light in the lower left corner will light up, indicating that the power supply is normal.

※5) External flash storage

※6) External EEPROM

※7) Passive buzzer alarm

※8) Onboard serial port wifi interface

※9) SWD programming debug interface





===============================================================================

☞【Notes:】

※1. The 5V SEL of the motherboard must be connected with INT and + 5V pins before printing (that means there must using the 12V-24V power supply to the motherboard for printing.

※2.If you want to replace the configuration file, please backup the factory configuration file to record the pin number of each part of the chip, and then make changes to th e new configuration file!



Any questions within using, pls fell free to QA us:)

• ※1.【SKR V1.3 Motherboard Parameters:】 ※Appearance size: 110*85mm ※Mounting size: 102*76mm ※Microprocessor: 32 Bit ARM cortex-M3 LPC1768 CPU ※ Motor driver: support TMC2208, TMC2130, ST820, LV8729, DRV8825, A4988, can be independently external motor drive ※ Driver working mode support: TMC2130 SPI, TMC2208 UART ※ Display: TFT28, TFT35, LCD2004, LCD12864
• ※2.【TMC2130 V3.0 Parameter description:】 Maximum resolution 256: microsteps per full step Step / Dir Interface: Microstep interpolation micro Player SPI interface spread Cycle : Extremely dynamic motor control chopper cool Step : current management for energy savings of up to 75%
• ※3.【SKR V1.3 Usage instructions:】 https://github.com/bigtreetech/BIGTREETECH-SKR-V1.3
• ※4.【BIGTREETECH TMC2130 V3.0 Manual：】 https://github.com/bigtreetech/BIGTREETECH-TMC2130-V3.0

User questions & answers

Question:	Can I use this thing with a cr
Answer:	All 3D printed objects are porous by nature and will harbor a ton of bacteria so I wouldn't reccomend using anything you print for food.

Product description

AnKun is the officially authorized seller of Creality and 3d printer accessories. We are devoted to provide high quality and economical 3D printer and 3d printer accessories, excellent after-sales to all customers. Our Creality authentic BLTouch sensor made in South Korea! The 3d printer auto leveling is a touch-based 3D printer bed leveling probe which enables automatic bed leveling on your 3D printer.

✔ Our Upgraded Creality BL touch V3.1 fits for Creality Ender 3 V2 / Ender 3 / Ender 3 Pro / Ender 3S / Ender 3 MAX / Ender 5 / Ender 5 Pro / CR-10 with 32 bit V4.2.2 or V4.2.7 mainboard.

✔ In standby mobe, no matter whether it is pulled out or retracted, the standby current of solenoid valve without current flow is less than 15ma, while in working mode, it suddenly rises to 100ms/300ma. Low power consumption and avoiding heating problems.

✔ Compatible with ABS, PLA, glass, metal, plastic and all meterials. Support more filaments and apply to every control board of 3D printer.

NOTE:

➤Only applicable to the above 3d printers with 32-bit motherboard.

➤No more need to use the ISP burner, which is more convenient to use.

➤Please move to the Creality Official Website to download the firmware.

➤Please keep away from magnetic components such as strong magnet motor and fan for installation.

Intelligence and Easy to Use:

Self-test: The push pin operate two times in a test when the power is on.

Alarm: The LED light blinks if a problem was found on a self-test or during operation

Wiring defect indicator: Blue and Red LED for indicating wiring defects.

Package Included:

BL-Touch leveling Module x 1

Spare Plastic Probe x 1

Mounting Bracket x 3

5 Pin Cable x 1

Screws x 4

Strip x 4

If you encounter unsolvable problems during installation and use, please feel free to contact us, our after-sales technical team will provide you with detailed solutions within 24 hours.

• WIDELY APPLICATION: Our Upgraded Creality BL Touch V3.1 fits for Creality Ender 3 V2 / Ender 3 / Ender 3 Pro / Ender 3S / Ender 3 MAX / Ender 5 / Ender 5 Pro / CR-10 with 32 bit V4.2.2 or V4.2.7 mainboard.(Note: Only applicable to the above 3d printers with 32-bit motherboard)
• LOW POWER CONSUMPION: In standby mobe, no matter whether it is pulled out or retracted, the standby current of solenoid valve without current flow is less than 15ma, while in working mode, it suddenly rises to 100ms/300ma. Low power consumption and avoiding heating problems. Please keep away from magnetic components such as strong magnet motor and fan for installation.
• HIGH-PRECISION: BLTouch auto bed leveling sensor fulfilled simple structure and high precision by using progressively designed solenoid and Hall Effect control. BLTouch's Standard Deviation in repeatability is around 0.005mm that make it easier to use and to increase the success rate of shaping. Therefore, the platform board can be selected at will. Compatible with ABS, PLA, glass, metal, plastic and all meterials.
• STRONG COMPATIBILITY: With 3 different mounting brackets can be installed on multiple 3d printers. 3D printer auto level is small in size and simple in structure, printing when connected. it can accurately measure the inclination of the hot bed and automatic compensation of Z axis, easily avoid the printing failure caused by uneven hot bed, so as to stable print. If you have any question, please feel free to contact us!

User questions & answers

Question:	Is this compatible with the CR-10 v
Answer:	Hi, I’m fairly new to 3d printing, but I’ll try to help. I’ve posted to several message boards in the past only to get nothing, and I hate that... First, please include your printer type. I have a CR-10 v3, and I didn’t have to adjust the x or y offsets. It may have been included in the firmware update I installed after adding the BLTouch. Part of my installation required flashing the firmware of the printer to include auto bed leveling commands/options. I would suggest finding your printer’s firmware with the modifications for the BLTouch. Unless you have an obscure brand, it should be available for download from the internet. I hope this was helpful.
Question:	is this a genuine bltouch or a clone, from my research this is something that will determine settings when setting up the firmware
Answer:	not the cable. but the the skr mini e3 is running marlin. you need the split end to connect it to the board with no cutting. you should be able to find the firmware without issue. but you will need to purchase the bltouch that has 2 connectors at the end of the cable and not 1
Question:	Is it possible to program the firmware as needed for the bl to work using a mac? or windows only
Answer:	I used the most current stable release of smith3d firmware. Works a treat.
Question:	I have the cr-10 v3, but i have seen installations with have different wiring order to the pins. which color is which connection on the 10 v2/v3 vers
Answer:	I bought my Ender 3 in June 2020, it arrived with a V4.2.2 board installed which is a 32bit board. If you have a MINI USB connector on your printer, it is an 8 bit board, but if it's a Micro USB then you already have the 32 bit board installed. The V4.2.7 board being sold here is a 32bit board. This board also has a socket specifically for the BLtouch, and a filament out sensor.

Product description

Note:



The firmware for the Ender 3 V2 comes pre-installed, but it also works excellently for the Ender 3/Ender 3 Pro/Ender 5/Ender 5 Pro as well.

You can move to Creality Official Website and download firmware: https://www.creality.com/download.



After sale service and technical support

If you have any issue, please kindly contact us. We will reply as soon as possible within 24 hours. We will offer you professional customer support and strive our best to offer your solutions.

• 【Super Quiet】The V4.2.7 mainboard comes with low decibel and silent TMC2225 driver,which makes the sound of the printer running below 50 dB.
• 【Plug and Play】Marlin 2.0.1 and firmware for Ender-3 V2 comes pre-installed on this board. You just plug in and start printing. With USB port, it can be worked with E/Z/Y/X Axis Motor. It comes with a bootloader pre-installed to for easy firmware updates.
• 【More safe】 Thermal runaway protection is enabled, if the temperature rises out of control, the printer will stop heating and halt automatically. The Board is Optimized by Circuit, effectively solve the heating problem. Bullet Point
• 【Easy to Operate】Flashing firmware is not a nightmare anymore. Prepare an SD card less than 8GB, save the firmware in SD card and delete other files, only firmware reserved. Then replug the SD card into the card slot and wait to 10s, when progress bar and interface appear, the firmware has been sucessfully updated. Support BL-Touch auto leveling and filament sensor. Bullet Point
• 【Compatibility】It can work with Ender 3, Ender 3 Pro, Ender 3 Max, Ender 5 and Ender 5 Pro 3D Printer. PLEASE NOTE: You need to flash firmwre for your printer if you install this board on those printers. Please contact us for related firmware.

User questions & answers

Question:	Bricked mine while trying to update the firmware. as i also updated the display, i'm afraid it wont be compatible. what firmware version does it have
Answer:	No, it comes with silent drivers... not sure which ones, but that negates the need for smoothers.
Question:	What firmware version does it have
Answer:	No... the holes drilled pretty much line right up. If you can put IKEA furniture together, you can put this printer together.
Question:	Is this compatible with the Ender 3 V
Answer:	Ender 5 Pro 3d printer with upgraded V1.1.5 silent Mainboard, TMC2208 drivers
Question:	Is this compatible with the Ender 5 Plus
Answer:	Pla,abs,tpu,petg

• 1) Using 32-bit 120MHz ARM-class Cortex-M3 series LPC1769 main control chip, the performance is greatly improved;
• 2) Equipped with highly modular open source firmware Marlin 2.0, which is convenient for users to DIY and secondary development;
• 3) Support 2.4, 2.8, 3.5-inch color touch screen, support LCD2004 screen, LCD12864 screen; Upgrade configuration firmware through SD card, simple, convenient and efficient operation;
• 4) On-board TMC-driven SPI working mode and UART working mode, and the on-board DIAG function pins are convenient for customers to use, eliminating the complicated wiring process, which can be used by simply removing and inserting the jumper cap; Functions such as continuous power on, material detection, shutdown after power off

User questions & answers

Question:	Can this run reprap or just marlin 2.0 (apologize if that's stupid question)? Compatible with Ender 3 Pro
Answer:	Hi there Thanks for your support of our store, if your mainboard is V4.2.2, download the firmware of 4.2.2 without adapter, if your mainboard is V1.1.4/V1.1.5, you should download the firmware of with adapter,if have any other question, feel free to ocntact us ahead of time Thanks
Question:	Is this uart tmc
Answer:	Hi Thanks for your support of our store. There is a replacement probe in the package This Creality Bl touch works with 32 bit mainboard (V4.2.2/V4.2.7) 3d printer perfectly. feel free to use , download the firmware from creality official website and download the matched firmware( with words no adapter), if have any other question, feel free to contact us ahead of time Thanks
Question:	Funciona con los driver de serie de la artillery sidewinder x1 los tmc
Answer:	yes you can
Question:	Purchased, and the f0 (part fan pinout) does not work. fans work on other pins, so they are not the issue. how do i contact tech support
Answer:	/Duration 0:06Loaded: 0.00%Stream Type LIVESeek to live, currently playing liveLIVERemaining Time -0:06 Playback Rate1xChaptersChaptersDescriptionsdescriptions off, selectedCaptionscaptions off, selectedAudio TrackFullscreenThis is a modal window. .noScriptDisplayLongText { display : none; } .noScriptNotDisplayExpander { display : none; } .noScriptDisplayLongText { display : block; } Hi~32-bit cables are all plugged into one interface (please refer to the wiring diagram), the actual compensation value range is -2.6~-3.3.

Product description

Warm Tips:

1.This Creality BL Touch just for Creality Ender3 V2,Ender 3,Ender3 Pro,Ender5, Ender5 pro with 32bit V4.2.2 or V4.2.7 mainboard.

2.Creality Official Website to download firmware:https://www.creality.com/download



After sale technical support

We strive to offer professional customer support and will reply to any concern or question within 24 hours.

• Widely Application: Creality BL Touch works for Creality Ender3 v2/Ender3/Ender3 Pro/Ender5/Ender5 Pro with 32 bit v 4.2.2/4.2.7 mainboard.(Require 3d printer with 32 bit V4.2.2 or V4.2.7 motherboard )
• Easy Firmware Installation: Simply download the BLTouch firmware from the Creality Official Website and save the file to your printer’s memory card. Insert the card in to your printer. Turn on the printer and wait a few seconds for the firmware to install.
• Easy to Install and Use: 3 different mounting brackets allows for installation on several of our printers.
• High-precision: Enhanced leveling with precision of +/- 0.005mm. This allows for easy leveling with pinpoint accuracy.
• Genuine High Quality Set: Our package was included 1 set of auto bed Leveling Kit and an another replacement probe. Simple, smart and easy to install.

• 【Wide Application】New upgraded Creality BL Touch V3.1 works for Creality Ender 3 V2/Ender 3/Ender 3 Pro/Ender 3S/Ender 3 MAX/Ender 5/Ender 5 Pro/CR-10 with 32 bit V4.2.2 or V4.2.7 mainboard (Note: Only applicable to the above 3d printers with 32-bit motherboard).
• 【Easy Firmware Upgrade】Download the BL-Touch firmware and copy it to the TF/SD card from the Creality official website, directly insert into the 3D printer card slot to update the program. No more need to use the ISP burner, which is more convenient to use.
• 【Easy Installation And Usage】With 3 different mounting brackets can be installed on multiple 3d printers. BL-Touch sensor is small in size and simple in structure, printing when connected. it can accurately measure the inclination of the hot bed and automatic compensation of Z axis, easily avoid the printing failure caused by uneven hot bed, so as to stable print.
• 【High-precision】The standard deviation of BL-Touch is only 0.005mm, making leveling more convenient. BL Touch is an auto leveling sensor for 3D Printers that can precisely measure the tilt of Bed surface and automatically adjust. It could work with any kinds of bed materials, such as ABS, PLA, glasses, woods, metals, plastic and so on.
• 【Genuine High Quality Set】Our package was included 1 set of auto bed Leveling Kit and an another replacement probe. Simple, smart and easy to install. If you encounter unsolvable problems during installation and use, please feel free to contact us, our after-sales technical team will provide you with detailed solutions within 24 hours.

User questions & answers

Question:	What would a stock ender 3 v2 offset be? / the wire connector is different from others. is this because the v3.1 version doesnt need it split
Answer:	of course it is, sad to say
Question:	what are the x and y offsets for mounting bracket
Answer:	Can’t speak for the ender 5 pro but it works great on my ender 3. Make sure to surf the internet for the best settings. Petg can be tricky to print.
Question:	does this work on an ender 3 pro with an skr mini e
Answer:	Box and manual states it was made in the Netherlands.
Question:	what is the firmware needed for V3.1? Seems Creality keeps changing their download website when compared to youTube tutorials released months ago
Answer:	If your dremel hotend can handle 1.75mm filament and can run at 240 degrees than it should work fine. A heated bed is recommended for PETG.

Product features

Mounting Bracket-1

For Ender 3/3S/3Pro, Ender 5/5S/5 Pro, CR-10

Mounting Bracket-2

For Ender 3V2

Mounting Bracket-3

For Ender-3 MAX

Easy Firmware Upgrade

Download the BL-Touch firmware and copy it to the TF/SD card from the Creality official website, directly insert into the 3D printer card slot to update the program.

No more need to use the ISP burner, which is more convenient to use.

Intelligence and Easy to Use

Self-test： The push pin operates two times in a test when the power is on.

Alarm：The LED light blinks if a problem was found on a self-test or during operation.

Wiring defect indicator：Blue and Red LED for indicating wiring defects.

Genuine High Quality Set

Our package was included 1 set of auto bed Leveling Kit and an another replacement probe. Simple, smart and easy to install.

• BL-Touch leveling Module x 1
• Spare Plastic Probe x 1
• Mounting Bracket x 3
• 5 Pin Cable x 1
• Screws x 4
• Strip x 4

Why Choose Tresbro?

Tresbro is the officially authorized seller of Creality 3D. We are devoted to provide high quality and economical 3D printers/3D printer accessories, excellent after-sales service to all customers. For any problem and concern, Our after-sales technical team will provide you with detailed solutions within 24 hours.

Product description

If you encounter any problems, please write us via Amazon as soon as possible. We have professional technical after-sales personnel to solve your problems.

SKR Mini E3 V1.2 Control Board Features:

1) Using 32-bit main frequency 72MHz ARM level Cortex-M3 series STM32F103RCT6 main control chip;

2) It is equipped with Marlin2.0, a highly modular open source firmware, which is convenient for users to do DIY and secondary development, avoiding the worries that they cannot master the core code;

3) Use powerful development tools, Visual Studio Code integrated development environment: support online debugging, more helpful for product development and performance optimization, using C language development, low development threshold;

4) The PCB board wiring is rigorous and beautiful, and has been specially optimized for heat dissipation;

5) A dedicated power chip is used to support 12-24V power input;

6) 24V input can be accepted. The current of the hot bed can be reduced to 1/4 under the same power, which effectively solves the problem of heat generation of the MOS tube of the hot bed.

7) Support 2.8 inch, 3.5 inch color touch screen and original LCD12864 screen of Ender3 printer;

8) Upgrade configuration firmware through SD card, easy to operate;

9) Use firmware to set the drive current to avoid burning the drive by manually adjusting the current, which is convenient, safe and reliable;

10) Support BLtouch, RGB color lights, locked rotation detection, shutdown after shutdown, etc.;

11) The integrated UART mode of TMC2209 makes the debugging of the motherboard and driver simple and integrated;

12) The expansion ports of some pins of TMC2209 are reserved to facilitate users to use DIAG instead of Endstop;

• 1) If you encounter any problems, please write us via Amazon as soon as possible. We have professional technical after-sales personnel to solve your problems.
• 2) Display screen: 2.8 inches, 8.9 cm color touch screen and Ender3 LCD12864 printer screen;
• 3) Compatible with BLTouch, RGB color lights, occlusion detection, stop and other functions.
• 4) Integrated UART mode of TMC2209 to simplify the debugging of motherboard and driver. The expansion port reserved for the TMC2209 pin is used to facilitate the use of DIAG instead of Endstop.

User questions & answers

Question:	Where can i purchase the wifi module for this
Answer:	6.5 mm
Question:	Can this setup be used in other printers besides the Ender
Answer:	Yes, it's perfect for GarageBand. I bought it especially to use with my iPhone or iPad and it also works well with Logic Pro too.
Question:	How do I get the color touch screen. Mine looks like an old dos computer monitor
Answer:	Plug this into your laptop, and headphones into your laptop as well, that should work!
Question:	is this compatible with the e3 pro
Answer:	Yes, you need a computer to use this keyboard. Thanks

• Meanwell Power Supply: Ender 3 Max comes with UL Certified power supply which with a stable output ensuring the temperature fluctuations are minimized and protecting your printer from unexpected power surges. It can heat the hot bed to 110℃ in around 10 minutes.
• Tempered Carborundum Glass Platform: Enable the hotbed heat up quicker and prints adhere better without the warping. Ultra smoothness even on the first layer.
• All Metal Extruder, Filament Detector, Dual Cooling Fans in Hot End Kit 2 Sides : promotes better printing result, prevent filament wasting and reduces filament blockage
• Silent Motherboard. Backed by TMC2208 silent driver, reduce noise and wobbling during printing, smoother motion and quieter printing process.; BL touch installation also is available(not included in package, you can buy one if you need. Please flash firmware first if you use a BLTouch).
• Quick Installation: Creality ender 3 max comes almost assembled, which is much easier to assemble than Ender 3. You only need to spend few minutes to attach the gantry with four screws, the screen, filament spool holder, portable handle and plug in some wires.

User questions & answers

Question:	what motherboard is in this one 4.22 or
Answer:	I can not speak specifically on the MakerBot since I don't have one but I will say that this kits components have become a standard used in all types of printers around the world in my opinion... The 2560 and ramps board setup has been a proven option in the 3D Printer community for a long time now. I am using mine on a large format printer build from scratch and I am recording the progress on YouTube. You can see how I am using the kit at PaPaw'sProjects... I don't think you can go wrong... Good Luck!
Question:	Which bl touch works for this
Answer:	if you are using Marlin, you need to define the display correctly and include the display library. If you think you have that right in the firmware, try switching the cables. If you have them backwards, the display will take two to three seconds for the backlight to turn on but you will get a blank screen. Power down, switch them, and power back up. If your backlight comes on almost immediately but the display is still blank, you have the cables right need to fix something in the firmware.
Question:	How hot can the hotend get
Answer:	Ramps1.4 3D printer circuit connection graph: http://osoyoo.com/2016/07/03/reprap-3d-printer-circuit-connection-graph/RAMPS 1.4 3D printer board Marlin firmware installation guide: http://osoyoo.com/2016/06/29/ramp1-4-board-for-reprap-3d-printer-firmware-installation-guide/
Question:	Is it prebuilt
Answer:	Arduino based Marlin firmware

Product features

Generous Print Volume

300*300*340mm printing size is larger ender 3, ender 3 v2 and ender 5.

Branded Meanwell Power Supply

Safe and secure. 350W-24V meanwell power supply ensure fast heating up the hot bed.

Models Are Removed More Easily

Add a tempered glass plate above hot bed. Better adhesion, easier removal after cooling and less wrapping.

DIY BLTouch Installation

It has reserved room for BLTouch bed-leveling probe, you can install it yourself if you wish. NOTE:BLTouch is not included in package. Please flash firmware version first if you need to use BLTouch.

Foldable Filament Holder

This filament mount can be rotated 90 degrees in one direction, can save space and make your desktop utilization higher.

Resume Printing Function

The machine can automatically resume printing after power-offer or filament breakage. Less worries on print failure.

Product description

New Upgraded ender 3 silent board

Creality V4.2.7 32-bit silent motherboard printing smoother and the running speed is obviously accelerated.

Package included:

Creality New Upgrade 32 bit V4.2.7 Silent Mainboard

Specifications:

Version: V4.2.7

Voltage: 24V Input/12V Output

Firmware: Based on Marlin 2.0.1

Motor Driver Stepper: TMC2225

Bootloader installed (ISP/USB Arduino)

TMC2225 drivers.Marlin 2.0.1 and bootloader installed. 

Support 24V input voltage.With USB Port, can be Worked With E/Z/Y/X Axis Motor.

IMPORTANT NOTES:

1. For ender 3 and ender 3 pro printer, you just plug in and start printing.

2. For ender 3 v2/ender 5, please update the corressponding firmware. Please go to the Creality official website to download:(https://www.creality.com/download)or contact us to acquire. DO NOT TRY RANDOMLY.If you have any other issues with the firmware update, please refer to our firmware flash videos available on YouTube.

Update Firmware:

You can copy the firmware file to a formated SD card with no other files in it. Turn off the printer and unplug the power cord. Insert the SD card & power cord, and turn on the printer. Wait 10s to complete the firmware updating process.

Thermal Runaway Protection:

Optimized circuit, enabling thermal runaway protection to effectively solve heating problems.

Note:

If you want to update the latest firmware, please check which motherboard your machine is equipped with.

If your machine comes with an 8-bit motherboard, please flash the 8-bit motherboard firmware.

If your machine comes with a 32-bit motherboard, please flash the 32-bit motherboard firmware.

• ❤【New Upgraded ender 3 silent board】Germany imported TMC ultra-quiet motor drive chip, ultra-quiet system design, so that the machine is always running at low decibels (<50dB). When you are in a quiet environment, you can safely and boldly perform 3D printing operations without apologizing, and you never need to worry about noise disturbing others.Creality V4.2.7 32-bit silent motherboard printing smoother and the running speed is obviously accelerated.1 Year Warranty.
• ❤【HUMANIZED DESIGN, EASY TO REPLACE】The 3D printer models compatible with the Ender-3 silent motherboard are: Ender-3/Ender-3 Pro/Ender3 v2/Ender-5.We can choose a silent motherboard for any of these products. Because these models are all DIY models.PLEASE NOTICE: It only pre-installs the Ender-3 firmware, if you want to install it in your Ender-3 Pro/Ender3 v2/Ender-5, you need to install the corresponding firmware.DO NOT TRY RANDOMLY.If you need the firmware, please contact us freely.
• ❤【DRIVER】TMC2225 drivers.Marlin 2.0.1 and bootloader installed. You can copy the firmware file to a formated SD card with no other files in it. Turn off the printer and unplug the power cord. Insert the SD card & power cord, and turn on the printer. Wait 10s to complete the firmware updating process.The Board is Optimized by Circuit, effectively solve the Heating Problem.Support 24V input voltage.With USB Port, can be Worked With E/Z/Y/X Axis Motor.
• ❤【SUPER SILENT DESIGN,WIDE RANGE OF USAGE SCENARIOS】The design of the Ender-3 silent motherboard extends the application scenarios of 3D printers, starting from ordinary manufacturing to indoor places such as homes, offices, research institutes, and especially some relatively quiet public areas.The use is very wide.
• ❤【AFTER SALE GUARANTEE】365 days 100% money back guarantee - For whatever reason, you are not satisfied, you can request a replacement or a full refund. Customer satisfaction is our tireless pursuit. If you are dissatisfied with the product, don't be too quick to leave a negative comment. Contact us! we will get back to solve any issue for you within 12 hours. We will show you a sincere attitude and satisfactory solution.

User questions & answers

Question:	It says to contact for firmware...I need ender 5 pro with BL touch, it says to "contact us
Answer:	This Ender-3Pro mainboard and ordinary motherboards have the function of resuming power off, not all of them need to be installed marlin2.0.X
Question:	I ordered this for my ender 3 v2, and started beeping as soon as i connected. is this because the firmware needs to be updated? or why
Answer:	1.5 to 2 liters, depends on how big the pieces are that you want to wash
Question:	I just ordered it for my ended 3v2 can you send me the firmware
Answer:	I use isopropyl alcohol. I believe denatured would work. You just cant use a water based cleaner (simply green, Mr Clean, etc) because the bearing will rust.

Product description

Warm Tips:

1. This Creality BL Touch is just for Creality Ender 3 V2, Ender 3, Ender 3 Pro, Ender 3S, Ender 3 MAX, Ender 5, Ender 5 Pro, CR-10 with 32 bit V4.2.2 or V4.2.7 mainboard.

2. If you have updated the firmware more than once, you have to rename the firmware file to something like Firmeware002.bin as the mainboard will not update its firmware if it detects you are using the same firmware name as the last update.

3. Creality official website to download firmware:

https://www.creality.com/download

• 【Compatiblity】This new upgraded Creality BL Touch works for Creality Ender 3 V2/Ender 3/Ender 3 Pro/Ender 3S/Ender 3 MAX/Ender 5/Ender 5 Pro/CR-10 with 32 bit V4.2.2 or V4.2.7 mainboard (Note: ONLY for 32 bit motherboard 3d printers mentioned above). With 3 kinds of install racks for different model's printer.
• 【Easy Firmware Upgrade】Copy the firmware file to a formated SD card with no other files in it. Turn off the printer and unplug the power cord. Insert the SD card & power cord, and turn on the printer. Wait 10s to complete the firmware updating process.
• 【Awesome Upgraded BLTouch Kit】Unlike the inductive probe, our Creality BLTouch is a touch-based 3D printer bed leveling probe which enables automatic bed leveling on your 3D printer, regardless of print surface. This bltouch sensor works perfectly with any surface, from glass to blue tape or woods, metals and so on.
• 【High Precision】The standard deviation repetition accuracy is about 0.005mm. After installing this bltouch, your printer will automatically detect the bed height at multiple locations around the surface of the bed and automatically adjust so that the hotend will always be the perfect distance away from the bed.
• 【Genuine High Quality Set】Our package was included 1 set of auto bed leveling kit and an another replacement probe. Return or replacement for any quality problems. We strive to provide the best experience for our customers.