8 best vxb turntables

Product description

TROOPS BBQ Lazy Susan Turntable Ring, 16 Inches



This heavy-duty aluminum Lazy Susan ring includes the ring and pads only, mounting hardware (screws) are sold separately. Rolling ball bearings with integrated spacers ensure a smooth rotation while reducing rotational friction to support heavy radial and axial loads.



The 16-inch swivel base can handle heavy radial loads up to 300 lbs. and has a single-row of pre-lubricated ball bearings. The ball bearings and internal spacers provide a quiet turn. Loads can increase the sound the bearings make when you turn it but nothing that is unmanageable.



Pre-Drilled Mounting Holes



The Lazy Susan turntable ring comes with four 5mm pre-punched holes on the inner ring to make installation easy.



Nearly Endless Practical Applications



You can use this heavy-duty round ball-bearing ring indoors or outdoors. It’s great for a wide array of DIY projects. Use the aluminum ring for cake decorating, food serving trays, spice rack organizer, electronics repair, pantry storage, swivel chairs, science projects, arts and crafts, dental equipment, sculptures, and much more.



Important: Please keep in mind that all HD (heavy-duty) turntables use internal spacers to provide smooth operation and decrease noise when turning. The spacers do not allow the ring to turn as freely as ring's without the spacers, like the MD (medium-duty) designs.



About Troops BBQ



Troops BBQ Lazy Susan’s were developed after many years experience with woodworking. Brothers David and Dirk Troop grew up in Southeastern Pennsylvania and learned the craft from their father. Our Lazy Susan’s came about from dissatisfaction with the quality of turntables that were commercially available several years ago. We believe our product is the best quality found anywhere and will be perfect for your project.

• LOW PROFILE & HEAVY LOAD CAPACITY – The aluminum Lazy Susan ring measures 16 inches in diameter with a low-profile 0.98 inch height. It can safely handle loads up to 300 lbs.
• SMOOTH TURNING WITH LESS NOISE – Each Lazy Susan turntable comes with a lubricated, single-row of ball bearings. They also have spacers between the bearings to ensure smooth rotation and act as a muffler to mute noise when rotating. Important: Not as "free turning" as Lazy Susan's without the spacers.
• PRE-DRILLED HOLES FOR SCREWS – We did the “heavy lifting” for you. Every swivel base comes with pre-punched 5mm screw holes with tapered edges on the inner ring for rapid installation.
• DESIGNED FOR USE INDOORS & OUTDOORS – This Lazy Susan hardware is highly resistant to corrosion and rust, making it an excellent choice for indoor and outdoor applications.
• WIDE VARIETY OF PRACTICAL USES – Use the aluminum rotating ring for cake decorating, food serving trays, spice rack organizer, electronics repair, pantry storage, swivel chairs, science projects, and much more.

User questions & answers

Question:	Could i use the 12inch with a 20inch barrel top, or is it too small
Answer:	If you secure the top it could work. The only concern would be tilting, if you have a lot of weight toward the edge and not centered it could possibly tilt.
Question:	What is inner diameter
Answer:	The inner diameter is 12- inch
Question:	May I have information on how to buy the feet/hardware that is not included
Answer:	Hi Maria - Any hardware store will have an assortment of rubber feet and mounting hardware you will need. Once you receive the lazy susan ring take it to your local store and they can help.
Question:	Do you have any bearings like this that will stay together and spin while mounted in a vertical orientation with very little weight
Answer:	All of the Troops BBQ Lazy Susan Rings are designed to be used in the horizontal position.

Product description

• 12" inch Circular plate : Circle
• 1000 lbs. max
• 15" inch to 30" inch turntable diameter
• Zinc plated
• 5/16" inch Thick

User questions & answers

Question:	can this product be used with 20.5 inch square shelves that are 65 inches tall? Will it be stable? 1000 pounds is more than enough. thank you
Answer:	As long as you fix the bottom to a base. It will not be stable enough on its own. Its also metal, so would mark your floor too without a board under.
Question:	For those that have attached it to furniture, is the furniture on carpet? And how does it turn on the carpet
Answer:	I posted several pictures. We sandwiched the bearings between wood, and the wood sits on our large rug. The wood is also attached to the bottom of the recliner. This design works wonderfully, we are pleased with the result. I don't think we would have changed anything in this design.
Question:	how do i attached it to 2 pieces of wood
Answer:	Let's consider that the Lazy Susan has a top and bottom. I used the larger side as the bottom......it has the large holes. Use those holes to drill that size hole through one piece of wood. Now attach the Lazy Susan to "that" piece of wood using the small holes. (The disc bottom has both large holes and small holes. The top of the disc has only small holes.) Now to attach the "top" of the Lazy Susan to the other piece of wood, use the large holes you drilled through the bottom wood to locate the small holes in the top of the disc. Using a long screw driver (always drill pilot holes) and screws, attach the disc to the other piece of wood. In doing a recliner, I attached a piece of wood to the metal frame of the chair and the other was a round piece of plywood to form the base or support for the chair. I then found the center of the round plywood base, attached the bottom of the Lazy Susan to it (via small screws in the small holes) then drilled large hole through the plywood via the holes in the Lazy Susan, turned it over and using the large holes found the small ones in the "top" of the Lazy Susan and put in screws to hold the whole thing to the chair. It worked like a charm. And it will support a person and chair if that's what you are doing. RHF
Question:	Can I attach this with a piece of wood on top and add my recliner on top of the wood. Or can I sandwich it between two pieced of wood and put recline
Answer:	I used 3/8 inch plywood above and below the bearing (sandwiched) and attached the top to the recliner base and it works fine on a heavy recliner.

Product description

2 Ton Heavy Duty 23 inch Diameter Large Turntable Bearings430mm x 580mm x 65mm 2 Ton Heavy Day 23 inch Diameter Extra Large Turntable Bearings for any heavy loads rotation Item: Extra Large Turntable Bearing Load Capacity:2Ton Type: Angular Contact Heavy Duty Bearings Size: 430mm x580mm x 65mm Bearing Inner Diameter: 430mm Bearing Outer Diameter: 580mm Bearing Width: 65mm Lubrication: Self Lubricated (Grease) Quantity: One Bearing Item A B C D E f h H d 2 Ton Heavy Duty Extra Large 23inch Turntable Bearing 580 580550550 452 43014 65 15.875 2 Ton Heavy 23 inch Duty Extra Large Turntable Bearings 430mm x 580mm x 65mm2TON-23-HEAVY-DUTY-TURNTABLE

• Item: 2 Ton Heavy Duty Extra Large 23inch Turntable Bearing Lazy Susan
• Type: Turntable Bearing
• Size: 430mm x580mm x 65mm
• Bearing Inner Diameter: 430mm
• Bearing Outer Diameter: 580mm

User questions & answers

Question:	Could I build a playground merry go round with this? Does it spin freely enough and would it seize up in the elements
Answer:	I would be careful. The one we purchased was being used on a hay bail wrapper that had a hydraulic drive. It was really "stiff" when we got it, (full of grease and one spot in the 360° did not turn as easy). Think you might do better with two bearing spaced about 2' apart on the center pole. Might have to have a thrust bearing on the lower one also. Good luck my friend!

Product description

• Zinc-plated for resistance to corrosion
• Load capacity of 500 pounds
• Six-inch square plate
• Ball bearing raceway for smooth rotation
• Mounting screws not included

User questions & answers

Question:	I need to make several 30" lazy susans for some corner cabinets.....will these work
Answer:	These are very sturdy and easy to work with. We used ours on an OT aid board which was 18" by 24" which kids would sit on and rotate. We have really liked ours and recommend them to anyone who needs a very sturdy device. You will need access to the ball bearing to apply a drop of oil every six months or so or else the can get a little noisy. Hope this helps.
Question:	What is the diameter of the inside circle
Answer:	The diameter of the inner circle is 4 & 5/8".
Question:	Which surface of the turntable is mounted to the piece and which rests on the table
Answer:	The turntable is constructed in such a manner that both surfaces are the same, either side may be mounted flush to either surface. In other words there is not a top or bottom.
Question:	Can this be used for making a diy chair? will it hold 200lbs for several hours in hunting conditions
Answer:	I don't see why it wouldn't work. It has been holding up just fine for our use and we have 300 lbs on it constantly

Product features

Shepherd Hardware 9548 6-Inch Square Lazy Susan Turntable

The Shepherd Hardware 6-inch wide 5/16-inch thick lazy susan turntable bearings are for turntables with a diameter between 15 and 30 inches. The bearings are zinc-plated for corrosion resistance, and have a load capacity of 500 pounds. It has a 6-inch square plate.

Features

• Zinc-plated for resistance to corrosion

• Load capacity of 500 pounds

• Six-inch square plate

• Ball bearing raceway for smooth rotation

• Mounting screws not included

Product description

VXB? Brand, 176 lbs Capacity 5.5" Lazy Susan Bearing 5/16"

Thick Turntable Bearings





176lbs Capacity 5.5" Lazy Susan Bearing 5/16 Thick

5.5" Circle plate

Load Capacity: 110-176 lbs

5.5" turntable diameter

Materiel: Steel Zinc Plated

5/16" Thick









176 lbs Capacity 5.5" Lazy Susan Bearing 5/16" Thick Turntable Bearings

5-5NCH-LAZY-SUSAN

• 5.5" Circle plate
• 176 lbs. max
• 5/16" Thick
• Material: Zinc Plated
• Quantity: One

Product description

VXB Brand, 500 lbs Capacity 6" Lazy Susan Bearing 5/16 Thick





500 lbs Capacity 6" Lazy Susan Bearing 5/16 Thick

6" square plate

1/4" ball bearings

500 lbs. max

mounted piece can be 15" to 30" in diameter

Zinc plated

5/16" Thick









500 lbs Capacity 6" Lazy Susan Bearing 5/16 Thick Turntable Bearings

Kit8883

• Item Weight :
• Item model number :
• Date First Available :
• Manufacturer :
• ASIN :

User questions & answers

Question:	Can this be used in a vertical position? Or will it come apart if the weight is not on it? Thinking of making a spinning prize wheel with it
Answer:	Hello, thank you for your email. I would not recommend this bearing in a vertical position. The ball bearings on this mechanism will jam with one another.
Question:	Can i use this with a 15" round ?or is it too small
Answer:	Hello, yes that will be good. We typically recommend 5-7" over hang on each side.

Product description

VXB Brand, 5 1/2"=140mm inch pink Cake Stand lazy susan

For cake decorating

Rotating cake stand, outer diameter is 140mm, and Thickness is 15mm

Item: 5 1/2" Dia. pink Lazy Susan Cake stand

Type: Baking Tool

Width: 15mm

Material: Plastic

Quantity: One

Cake is not included

5 1/2" Inch Dia. PINK Lazy Susan Turntable Bearing cake stand

LAZY-SUSAN-CAKE-STAND

• Item: 5 1/2" inch Lazy Susan Bearing
• Type: Cake Stand Decorating Tool
• Color: Pink
• Width: 15mm
• Quantity: One

Product description

450mm Lazy Susan Aluminum Bearing 500 lbs Turntable Bearings VXB Brand New ;supply_from:home-gallery

• i'd love to solve all problems, pls send message with name: - 450mm Lazy Susan Aluminum Bearing 500 lbs Turntable Bearings VXB Brand New ;supply_from:home-gallery

User questions & answers

Question:	Which one can I use for a 500lb round hay bale
Answer:	Hello, I would consider the 600mm lazy susan so you have weight room for your hale bale.