12 best epoxy for plastic

Product description

PlasticBonder is a quick-setting, two-part, urethane adhesive system that provides strong and lasting repairs and works on thermoset, carbon fiber composites, thermoplastics, coated metals, concrete & more. PlasticBonder has a 1:1 mixing ratio, sets in 15 minutes and can be sanded after 30 minutes. With a tensile strength of 3770 PSI, PlasticBonder sets black in color and cures to a hard, permanent bond.

• J-B WELD PLASTICBONDER (Black): A quick setting and multipurpose two part urethane adhesive & gap filling system that provides a strong and lasting bond to many plastic surfaces J-B Weld PlasticBonder is great for DIY plastic repairs, filling dents, bumper repairs and more J-B Weld PlasticBonder now comes in a syringe allowing for an easy 1: 1 mix ratio The unique syringe has a re-sealable cap that prevents drying out and leaking, allowing for multiple uses
• CURE AND SET TIME: After mixing the two part formula with the included mixing tray and stir stick, PlasticBonder takes 15 minutes to set and 30 hours to cure J-B Weld PlasticBonder set and cure color is black
• STRENGTH: J-B Weld PlasticBonder has tensile strength of 3770 PSI
• SURFACE APPLICATIONS: Thermoset & Carbon Fiber Composites, Thermoplastics and Coated Metals, Plastic & PVC, Concrete, Ceramic & Tile, Fiberglass, and Aluminum
• DO IT YOURSELF: Big or small, you can DIY it with J-B Weld Our heavy duty epoxy and adhesives repair & restore it right the first time J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond

User questions & answers

Question:	Will this material self-level
Answer:	This Plastic Bonder Body Panel Adhesive is self-leveling, for a few minutes anyhow after mixing. This stuff dries to a very glossy surface even if disturbed immediately after application, so touchups are sorta possible. It is a two-part urethane and cures to a quite hard, durable, tough, and fairly strong plastic. It is almost more a solidifying liquid plastic than it is a glue, though it does seem to stick to stuff well. I look forward to making some casted plastic parts with this stuff by utilizing silicone molds that I make from 3d printed patterns There are many casting resins out there but sometimes I want small parts and this convenient two-part urethane should be a quick and easy application.
Question:	Would this product work for gluing a plastic speaker cover back onto a rear plastic door panel
Answer:	It depends on the plastic. I have had great success repairing a couple of "automotive" parts. It will either work or it won't. Make sure the surfaces are clean and free of dirt and oil. It helps to "ruff up" the surrounding surfaces with sand paper especially if the plastic surface is smooth and shiny.
Question:	does is repair a very thin crack from the sun on dashboards
Answer:	If you can get the bond inside the crack, i think it would work. I used it to repair a broken stained glass shade and a hanging plastic bug zapper roof. The bond dries hard and holds very well. It is glossy so it may show a little.
Question:	is this product ok for a gas can seam that is bad. or will the gas eat it away
Answer:	I would buy a new gas can or get a bigger insurance policy.

Product features

Quick Setting Adhesive

PlasticBonder is a quick-setting, two-part, urethane adhesive system that provides strong and lasting repairs and works on thermoset, carbon fiber composites, thermoplastics, coated metals, concrete & more. PlasticBonder has a 1:1 mixing ratio, sets in 15 minutes and can be sanded after 30 minutes. With a tensile strength of 3770 PSI, PlasticBonder sets black in color and cures to a hard, permanent bond.

Additional Attributes

All J-B Weld Syringes have a unique dispensing system allowing customers to re-seal the product, which prevents air from curing the epoxy or adhesive, so they can use it multiple times. J-B Weld also provides a mixing tray and stick in the package so you can get to work right away!

Product description

J-B Weld Plastic Weld Epoxy Putty Plastic Weld is a hand-mixable, fast-setting epoxy putty that forms a durable bond to most major plastic types. After mixing, it forms a polymer compound that can be molded or used to build up and repair just about anything made from plastic. When cured, it can be sawed, drilled, carved, sanded and painted. Plastic Weld has a 20-25 minute work life; functional cure occurs in 2-3 hours. Plastic Weld cures to an off-white color, is rated at a tensile strength of 350 PSI. Does not adhere to polyethylene, polypropylene or some other plastics. Test for adhesion first. Use on: AutomotiveCeramicFiberglassPlastic/Composite/PVCAnd more Instructions 1. Cut: Remove required amount of putty. 2. Mix: Thoroughly knead putty with fingers to a uniform color. 3. Apply: Press putty firmly to the surface to be repaired. J-B Weld is proudly made in the USA

• J-B WELD PLASTICWELD: A hand mixable two part epoxy putty stick that is formulated to repair and rebuild various plastic compounds and surfaces. J-B Weld PlasticWeld is designed for DIY plastic repairs on ABS, PVC & CPVC pipes and plastics, auto bumpers and more! PlasticWeld is certified by the NSF and is safe for contact with potable water.
• CURE AND SET TIME: After kneading the two part formula together by hand, PlasticWeld takes 25 minutes to set and cures in 3 hours. J-B Weld PlasticWeld set and cure color is off white.
• PRODUCT FEATURES AND STRENGTH: J-B Weld PlasticWeld has lap shear strength of 600 PSI. PlasticWeld can withstand continuous temperatures up to 250oF (121oC) and intermittent temperatures up to 300oF (148oC) when fully cured. PlasticWeld does not shrink and can be molded, shaped, sanded, drilled and cut.
• APPLICATIONS: ABS, PVC & CPVC pipes and plastics, auto bumpers and trim, vinyl surfaces and siding, marine repairs & fiberglass parts, plastic water tanks, and plumbing.
• DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond.
• Repair and rebuild any rigid and semi-flexible plastic including ABS, PVC and CPVC
• Bonds instantly

User questions & answers

Question:	Will this product repair broken plastic boat windshield inviisibly
Answer:	will this product repair a broken plastic door handle
Question:	Can it be used more than once, or is thrown away after one use
Answer:	Comes with a resealable cap, I opened mine at least two weeks ago and have still been able to use it (also used on multiple projects during those weeks). Just be careful to replace the cap in the same holes you removed it from or you will mix the two components and seal the lid.
Question:	Will it seal a PVC pipe that has a 1 inch slit? Must hold 75lbs of water press. Would put a rubber patch & 2 pipe clamps over it
Answer:	Yes, it is awesome! I've used it for years! It should work great!!
Question:	Is this product good for the broken plastic frame of eyeglasses? The eyeglasses is broken on the temple leg
Answer:	As an optician for over 30 years, sadly, nothing I've found short of a 2 part epoxy/resin will work...but only .temporarily. plus you'll probably get it everywhere including the lenses. I suggest visiting your local optician. I have tons of discontinued frames and can usually hand-edge the lenses if its a close fit . BTW, its the same with so-called scratch removers for eyeglass lenses:snake oil. hope this helps... John shameless plug follows: glassescontacts.com or FB.

Product features

Epoxy Putty

PlasticWeld is a hand-mixable, fast-setting epoxy putty that forms a durable bond to most major plastic types. *After mixing, it forms a polymer compound that can be molded or used to build up and repair just about anything made from plastic. When cured, it can be sawed, drilled, carved, sanded and painted. PlasticWeld has a 20-25 minute work life; functional cure occurs in 2-3 hours. PlasticWeld cures to an off-white color, is rated at a lap shear strength of 600 PSI. Does not adhere to polyethylene, polypropylene, or some other plastics.

Additional Attributes

• PlasticWeld NSF Certified - Safe for contact with potable water.
• PlasticWeld can resist continuous temperatures of 250°F (121°C) and intermittent temperatures of 300°F (149°C).

Product description

Easy-to-use self-mixing dispenser and precision applicator. High-strength formula bonds wood, metal, tile, ceramic, glass, plastic and more. Final bond is high strength and weather-, water- and solvent-resistant. Sand able and paintable.

From the Manufacturer

For over 50 years, Loctite has provided customers with advanced adhesive and sealing solutions. Loctite Epoxy 5 Minute Instant Mix is a two-part adhesive consisting of an epoxy resin and a hardener. When mixed in equal volumes, the resin and hardener react to produce a tough, rigid, high strength bond, which starts to set in 5 minutes and reaches handling strength in 1 hour. The static mix nozzle delivers a uniform mixture of resin and hardener every time. It can be used as an adhesive for a wide range of materials or as versatile filler for gap bonding, surface repairs and laminating. Loctite Epoxy 5 Minute Instant Mix does not shrink and is resistant to water and most common solvents. It can be tinted with earth pigments, cement or sand for color matching and can be sanded and drilled. Our uncompromising level of quality and innovation is achieved through a strong commitment to research and development. This commitment to innovation, quality and reliability has truly earned Loctite the reputation of delivering "Trusted Performance. Proven Results".

• Easy-to-use self-mixing dispenser and precision applicator
• High-strength formula bonds wood, metal, tile, ceramic, glass, plastic and more
• Waterproof, sand able and paintable
• It can be used as an adhesive for a wide range of materials or as a versatile filler for gap bonding, surface repairs and laminating.
• Loctite Epoxy Instant Mix 5 Minute does not shrink and is resistant to water and most common solvents.
• The static mix nozzle delivers a uniform mixture of resin and hardener every time.
• It can be tinted with earth pigments, cement or sand for color matching and can be sanded and drilled.
• Recommended for bonding metal, glass, ceramic, wood, many rigid plastics, china, tile, fiberglass, concrete and stone.

User questions & answers

Question:	Can this be used to repair scratches in quartz countertops
Answer:	I wouldn't use it to repair quartz since it is a porous solid when it cures.
Question:	does the Marine Epoxy come in another color other than white. And are any of your other products suited for constant outdoor use
Answer:	Thank you for your question about Loctite Epoxy Five Minute Instant Mix. This product is not the Marine variation, however that is currently only available in white through us. For any other questions about product specifications feel free to reach us at 800-453-0349. Thanks and have a great day!
Question:	Can this be used multiple times or only once before it dries out or otherwise becomes unusable
Answer:	Two times with the supplied nozels. You can use it more than two times but must mix epoxy by hand and apply with tooth pick or other device
Question:	where can i get extra mixing tips
Answer:	I’ve had good success just squirting it onto some cardboard, mixing with a popsicle stick, then applying to surface.

Product features

5 Minute Instant Mix Epoxy

Product description

Plastic Bonder is a quick-setting, two-part, urethane adhesive system that provides strong and lasting repairs and works on thermoset, carbon fiber composites, thermoplastics, coated metals, concrete & more. Plastic Bonder has a 1:1 mixing ratio, sets in 15 minutes and can be sanded after 30 minutes. With a tensile strength of 3770 PSI, Plastic Bonder sets to a tan color and cures to a hard, permanent bond.

• J-B WELD PLASTICBONDER (Tan): A quick setting and multipurpose two part urethane adhesive & gap filling system that provides a strong and lasting bond to many plastic surfaces. J-B Weld PlasticBonder is great for DIY plastic repairs, filling dents, bumper repairs and more! J-B Weld PlasticBonder now comes in a syringe allowing for an easy 1:1 mix ratio. The unique syringe has a re-sealable cap that prevents drying out and leaking, allowing for multiple uses!
• CURE AND SET TIME: After mixing the two part formula with the included mixing tray and stir stick, PlasticBonder takes 15 minutes to set and 30 hours to cure. J-B Weld PlasticBonder set and cure color is tan
• STRENGTH: J-B Weld PlasticBonder has tensile strength of 3770 PSI.
• SURFACE APPLICATIONS: Thermoset & Carbon Fiber Composites, Thermoplastics and Coated Metals, Plastic & PVC, Concrete, Ceramic & Tile, Fiberglass, and Aluminum.
• DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond.

User questions & answers

Question:	Work on battery
Answer:	Might work on the plastic case - but I would not use in contact with battery acid
Question:	Can this be used to fix a small crack in a dashboard
Answer:	Yes! I used it to repair the vacuum
Question:	Will this work on hdpe
Answer:	I used this on a PVC job and it worked well for that, but I mixed it on a plastic lid that was HDPE (#2 recyclable) before applying it. There was some left on the lid, and after it dried, it pealed right off the lid, so I'm not too sure about using this on HDPE.
Question:	I want to bond glass to polypropylene. Does this work? If not any good epoxy that works for this
Answer:	I did not know if the plastic bonder would stick to glass, so I tried it on some empty glass jars and old prescription pill bottles which were made of Polypropylene, (type 5 plastic). I cleaned and sanded both the plastic bottles and the glass jars. I applied the JB Weld Plastic Bonder to one sample and also tried PC-11 Marine Power Epoxy Paste on another, (the jars and bottles were put together bottom to bottom). After they had cured I tried to pull them apart. Both the Plastic Bonder and the Epoxy Paste held with light pulls and twists. Both came apart with a medium/heavy pull. Both the Plastic Bonder and the Epoxy Paste stuck tenaciously to the glass jar, and came off cleanly from the plastic bottle. So it does stick to glass rather well, while holding, but not bonding to the Polypropylene bottle. I would try some on your particular application, (a sample), and see if the medium holding power to the Polypropylene will work for you. The Plastic Bonder was much easier to mix and apply than the Epoxy Paste. The Plastic Bonder cured in about two hours while it took 24 hours for the Epoxy Paste to cure. Both had about the same results as far as the holding power, but the Plastic Bonder when mixed is like a gel, while the Epoxy is a much thicker paste, which means you could use it to fill gaps and holes. It was easy to file/sand the Plastic Bonder after it had cured, the Epoxy Paste could be worked after it had cured, but it was much harder to do so.

Product features

Quick Setting Adhesive

PlasticBonder is a quick-setting, two-part, urethane adhesive system that provides strong and lasting repairs and works on thermoset, carbon fiber composites, thermoplastics, coated metals, concrete & more. PlasticBonder has a 1:1 mixing ratio, sets in 15 minutes and can be sanded after 30 minutes. With a tensile strength of 3770 PSI, PlasticBonder sets to a tan color and cures to a hard, permanent bond.

Additional Benefits

All J-B Weld Syringes have a unique dispensing system allowing customers to re-seal the product, which prevents air from curing the epoxy or adhesive, so they can use it multiple times. J-B Weld also provides a mixing tray and stick in the package so you can get to work right away!

Product description

Gorilla takes epoxy to a new level—the Gorilla Tough level. With its superior solvent and water resistance, Gorilla Epoxy adhesive is incredibly strong and durable for household and automotive repairs alike. The easy-to-use syringe keeps the epoxy resin and hardener separate, so it is easy to dispense and won’t harden over time. The two-part, gap-filling formula easily bonds steel, aluminum, glass, wood, ceramic, tile and most plastics. Plus, it dries in an ideal, crystal-clear finish that makes projects look spotless. Directions: 1. Prepare Your Work Area and the Surface: It is recommended to use Gorilla Epoxy in a well-ventilated area. Prepare the surface: To improve adhesion, roughen smooth surfaces before gluing. Then clean and dry all surfaces to be bonded. 2. Mixing Gorilla Epoxy: Remove the black cap. With tip pointing upward, cut or snap the end from tip of the syringes. With the tip still pointing upward, eliminate air and ensure even dispensing by slowly pushing the plunger until both the resin and the hardener are at the tip. Push the plunger to dispense even amounts of resin and hardener onto a clean, disposable, contained surface. Mix the two parts for about 20 seconds, until the mixture is uniform. 3. Application: After mixing is complete, apply Gorilla Epoxy within 5 minutes. The epoxy mixture will continue to thicken and the bond strength will decrease the longer you wait to apply. 4. Clamping: To reach maximum bond strength, clamp project together and leave undisturbed. Important Cure Times: Set: 5 minutes to apply and position Handling: Allow to cure for 30 minutes undisturbed (no weight or handling) Final Cure: Allow 24 hours for load-bearing weight Storage: To close, pull plunger slightly back. Wipe tip clean with dry cloth and align notch on tip and cap. Close tightly. Click on the Gorilla link at the top of this page to see more fine products from the Gorilla Glue Company.

• Strong, permanent, fast and gap-filling; Great for multiple surface applications
• Best for tough repairs requiring a durable bond, gap-filling and solvent resistance
• Dries clear; Ideal for clean, easy finishing
• 5 minute set; Plenty of repositioning time for the perfect fit
• Easy-to-Use Syringe; Separate barrels of resin and hardener keep epoxy from hardening, plus syringe dispenses evenly and includes a cap for multiple uses

User questions & answers

Question:	Will Gorilla glue work on hanging something on ceramic tile
Answer:	I have zero doubt that it will work. I would prep the surface of the tile with sandpaper or steel wool at the least.
Question:	Will this work to fix an axe head
Answer:	I used this to fix a maul head to the handle. It was slipping thru extended use and looked like it would come off soon. First sanded and cleaned the fiberglass handle with acetone to created a rough and clean surface. Then wiped the inside of the mall head with acetone. Mixed up a big batch since I didn't want to fall short of product once I started filling. Applied it liberally to the handle then slipped the head on and used the rest to fill in around any crevice left around the head until it was one pool of epoxy flush with the head top. Let it sit for a day then used. Been over a year and it has not had any sign of slipping and looks the same as when I first glued it on.
Question:	I need a clear epoxy to cover and protect a circuit i made in a small box mod i made. its for a small 4- 6 volt device. is this ok
Answer:	Probably YES is your answer with NO guarantees, since I have never used an epoxy to cover ANY type of circuits. I HAVE HOWEVER, used a SILICONE SEALANT (marine grade) also available through AMAZON, to cover AND seal electrical circuits on several watercraft I have owned over the years. ALL with great success. The beauty of the silicone is that it dries clear and can easily be removed while the epoxy dries to an amber hue and is almost impossible to remove. Once it dries, it's there forever. MY suggestion is use a marine grade (waterproof) silicone sealant. GOOD LUCK!
Question:	I'm thinking of using this on ceramic cookware. Is it heat resistant up to 500 degrees F
Answer:	MamaO - researched question - Do NOT use Gorilla epoxy on food ceramics. For other ceramics other than food, should be ok up to 180. From 200-500, epoxy will de-compose. / Look for food safe stuff only, but best to not repair your ceramic for food use. What you want is hard to find !

Product description

1363118 Features: -Bonder. -Bonds nylon, polycarbonate, Mylar, PVC, acrylic, ABS, stainless steel and many other plastics. -Resistant to solvents, gasoline, diesel fuel and motor oil. -Extremely resistant to high humidity, moisture and impact. Product Type: -Plastic Adhesives. Dimensions: Overall Height - Top to Bottom: -3.88 Inches. Overall Width - Side to Side: -8 Inches. Overall Depth - Front to Back: -1.5 Inches. Overall Product Weight: -0.2 Pounds.

From the Manufacturer

For over 50 years, Loctite has provided customers with advanced adhesive and sealing solutions. Loctite Epoxy Plastic Bonder is an acrylic formula that is specially formulated to bond and repair plastic surfaces. The convenient double syringe dispenses equal amounts of each component every time. When mixed in equal volumes, the components react to produce a tough, rigid, high strength bond in 20 to 25 minutes. This 2-part acrylic is formulated to give structural strength to plastic projects and repairs, making it great for hard-to-bond plastics. Loctite Epoxy Plastic Bonder does not shrink and is resistant to water, most common solvents and shop fluids. It has high impact resistance and can be sanded and drilled. Our uncompromising level of quality and innovation is achieved through a strong commitment to research and development. This commitment to innovation, quality and reliability has truly earned Loctite the reputation of delivering "Trusted Performance. Proven Results". This item in non-returnable

• Bonder
• Bonds nylon, polycarbonate, Mylar, PVC, Acrylic, ABS, stainless steel and many other plastics
• Resistant to solvents, gasoline, diesel fuel and motor Oil
• Extremely resistant to high humidity, moisture and impact
• 0.85 oz

User questions & answers

Question:	Will this work on a small engine plastic gas tank
Answer:	Actually, the Data Sheet from Loctite states: Chemical and Solvent Resistance: Resistant to water, salt water, unleaded gasoline, diesel fuel and motor oilhttp://www.loctiteproducts.com/tds/EPXY_PLSTC_S_tds.pdfI'd be certain to follow all of the preparation instructions listed in that document though... cleaning, roughing-up. etc.
Question:	Depicted on the package is a white polypropylene lawn chair. Will this product do a repair of that item
Answer:	I haven't found many plastics to which it will bond, so I'd say no...it would not work. Especially something you expect to hold a person off the ground.
Question:	Will this bond hdpe to hdpe
Answer:	I disagree. HDPE is a slick nylon-like plastic and this stuff fails miserably on any of those compounds.
Question:	What color is it when it dries? Clear
Answer:	Hello, I would say it's more grey but one the clear side though. I am not sure if the percentages of the mix makes a difference. I mixed it 50/50. Hops this helps.

Product description

Want to give your surfaces a long-lasting crystal clear finish?



Applying epoxy resin to your tabletops or countertops will give them a clear, protective coat. Not all epoxy resins stay clear and bright at all times, though. Some resins can start looking dull, especially if it is exposed to elements.



If you are looking for an epoxy resin solution that mixes quickly, pours easily, and stays crystal clear for many years, this easy pour epoxy resin gallon kit is what you need.



Give your surfaces a stunning protective coating with the EasyPour Epoxy Gallon Kit.



When applied properly, epoxy resin can bring out the beauty and detail of different surfaces, such as wooden tabletops, sculptures, and art work. This epoxy resin solution pours smoothly, reducing the formation of bubbles and lumps in the mixture.



Forget about heading to your local hardware to purchase mixing materials. Each kit already includes 2 mixing cups, a silicone spatula, and a plastic spreader. Spend less time sourcing supplies and start working on your DIY projects right away.



Other epoxy resins tend to appear yellowish or lose their clarity under prolonged sun exposure. Our epoxy resin is formulated to withstand UV rays, so you can expect a crystal clear protective coating that lasts much longer.



Need more time to make a decision? Here are more reasons to love this epoxy resin gallon kit:



✔️ Plastic spreader, cups, bottles, and epoxy solution are made in the USA

✔️ BPA-free epoxy resin

✔️ Full-sized cups for quicker mixing

• ✅ START RIGHT AWAY - This Liquid Epoxy Resin Kit Comes With A 64oz Bottle Of Resin And Hardener (Totaling A Gallon Of Epoxy Resin When Mixed), 2 Mixing Cups, A Silicone Spatula, And A Plastic Spreader
• 💎CRYSTAL CLEAR FINISH - Unlike Other Epoxy Resin Crystal Clear And Hardener Kits That Yellow Over Time This Epoxy Resin Crystal Clear Coating Produces A Hard Gloss That Withstands Water And Scratches
• 💧BUBBLE FREE - Create And Culture Seamless Works Of Art. Our Epoxy Crystal Clear Resin Epoxy Is Designed To Mix And Pour Easily, Reducing Bubbles To Deliver A Clear Laminating Finish
• 🔨 ALL YOUR CRAFTS - This Clear Epoxy Resin Art Kit Can Give A Glass-like Glaze To Your Plywood, Floor, Paint, Coffee Table, Countertops, Jewelry, Coasters, Tiles And Marine Boat Fiberglass Projects
• 😄 PERFECT FINISH - This Gallon Of Resin Epoxy Kit Is Self-leveling Epoxy Resin Creates An Amazing, Clear Coating On Wood, Granite, Ceramic, Porcelain, Marble, Laminate, Metal, Canvas, And Much More.

User questions & answers

Question:	what is the heat tolerance? I would like to use this for coasters but have to know if this will tolerate the heat from a hot cup
Answer:	Yes. It is up light sealed or torched. It can withstand the heat from a mug
Question:	Estimated time this product takes to harden
Answer:	Three hours
Question:	can a roller be use to apply
Answer:	I can’t imagine the need for a roller. This product is heavier than paint but self leveling. Pour and if needed, use the tool that comes with it to move it.
Question:	Can I use this to glass a surfboard
Answer:	Yes

Product description

THREE Gallon Kit (2 Gallon Base Resin & 1 Gallon Curing Agent) For River Tables, Large Castings & Deep Pour Applicaions

Your embedding and casting projects deserve only the CLEAREST and best casting resin.



Incredible Solutions Pourable Plastic Deep Pour Casting Resin is the perfect solution for RIVER TABLES, CASTING FIGURINES, JEWELRY, EMBEDDING APPLICATIONS & more.



Key Features Of Our Deep Pour Epoxy:



★Crystal Clear, clear as water finish, minimal bubbles & shrinkage

★Slow Work time, adequate time to mix, pour and work material before hardening

★Made In USA with UV Inhibitors To Resist Yellowing

★Mixes well with colored & metalic mica pigment powders

★UV Resistant:

★Easy 2:1 BY VOLUME mixture, two part (Base Resin & Curing Agent)



Kit Includes: 2 Gallon Resin + 1 Gallon Curing Agent = 3 Gallon KIT



Food Safe: Epoxy is possible to be food safe when fully cured. However, because the customer is mixing/pouring we cannot say this is food safe. Each mixture/application would have to be assessed individually.

• ✔ Deep Pour 2" Thick For River Tables, Live Edges, Casting & Embedding Applications
• ✔ Colored Epoxy Compatible, Mixes Well With Mica Pigment Powders Or Cures Crystal Clear
• ✔ Low Exotherm & Low Viscosity, Long Working Times, Minimal Shrinkage
• ✔ 2 Gallon Resin + 1 Gallon Curing Agent = 3 Gallon KIT
• ✔ MADE IN USA With Added UV Inhibitors To Help Resist Yellowing

User questions & answers

Question:	can you send the epoxy through the planer once it has cured
Answer:	Absolutely! Once it is fully cured you can do that.
Question:	I used (a lot!) of this resin for a river table for a client. They're wondering how to best keep the surface clean. What do you suggest
Answer:	Definitely nothing harsh. We normally suggest Windex or mild soapy water and rag.
Question:	Im making a table 3×3 2 inchs thick how much woukd i need to cover it
Answer:	Length X Width X Height = the volume needed, then convert it to gallons or liters. 36"x36"x2"=2592 cubic inches which equals 11.22 gallons if my math is correct. If you have any material inside of the table like wood or metal that will have to be subtracted from the volume. Hope that helps.
Question:	How long do you wait between pours for a thicker project
Answer:	I have poured between 2-3 inches successfully. More than that and you can do one of two things: 1) wait about15-20 hours and pour while the first coat is still tacky yet firm so that it can chemically bond. 2) Wait 36-48 hours for it to harden, sand it lightly and then pour sonit can mechanically bond

Product features

Crystal Clear Finish

High gloss, ultra clear finish makes our Pourable Plastic Epoxy Resin perfect for River Tables, Live Edge Tables, Jewelry, Figurine, and other Castings. However, epoxy is not flexible. River tables must be supported to prevent flexing which could cause cracking.

*Do not pour over oil-based paint or stain.

Common Question: My project is painted or stained with an oil based product, what can I do?

A: You can apply a water based clear coat (must be water based). Once the water based clear coat has fully cured, you can apply the epoxy. If the clear coat leaves a shine/gloss you may want to scuff the surface to ensure the epoxy properly sticks. We recommend using 320 grit sandpaper. If you do sand, be sure to thoroughly clean the surface prior to applying the epoxy. We recommend using Isopropyl Alcohol 99% (be sure it is 99%) to clean.

UV Resistant

Although most epoxies will yellow over time, some resist yellowing caused by exposure to ultraviolet light better than others. Our epoxy contains UV Inhibitors which helps to resist yellowing. *Although our epoxy is UV resistant, which resists yellowing, we do not recommend leaving finished projects in direct sunlight or for permanent outdoor applications.

Common Question: Can I use this on a table that will be outside on a covered patio?

A: It is possible to leave the epoxy outdoors if not exposed to direct UV exposure. If the epoxy is exposed to direct UV, the epoxy can yellow. This will be more noticeable on white or lightly colored substrates/surface. We recommend exercising caution when considering use over white or light-colored surfaces.

It is also important to consider temperature fluctuations. Materials such as metal and glass can expand and contract at a different rate from the epoxy. This could cause glass to crack or the epoxy to peel away from a metal surface.

Deep Pour 2" Thick

Many coating epoxies require thin pours of no more than 1/8-1/4 Inch per application. Our Pourable Plastic Deep Pour is capable of pours up to 2 Inches Thick. This is a very slow curing product allowing for longer work times and low heat exotherm. Be sure curing products are kept in a clean, dry, dust-free environment.

Common Question: Does your epoxy require specific temperature environment to mix/pour epoxy?

A: The ideal working temperature is around 77°F. Best results can be obtained at temperatures between 75°F and 85°F, in a clean, dry, dust-free environment. Avoid working in high humidity. It is important you keep your project in this environment throughout the entire curing process. We recommend using this product on a leveled and flat work surface so that it can flow and self-level properly.

Colored Epoxy Compatible

How To Color Epoxy: Our epoxy mixes well with mica pigment powders for colored epoxy applications. River tables, resin art canvas and more may require tinted epoxy. Epoxy is not meant to be mixed with or poured over oil-based products. Do not pour over oil-based paint or stain.

Common Question: What type of pigment or dye should I use with this epoxy.

A: We do not recommend mixing epoxy with paint or anything oil based. Many of our customers use mica pigment powders. Mica pigment powders come in many different colors, glitters, metallics, and even glow in the dark.

Common Question: How Much Pigment Powder Should I Use?

A: This is a subjective answer as it depends on the certain hue and level of opacity desired. We suggest starting with a very small amount and adding more until the desired color is achieved. We also always suggest testing a small scrap piece of material to understand how the epoxy will flow and how the color will cure in the epoxy.

Easy To Use 2:1 By Volume Mixture

Impact Resistant & Superior Air Release

Popular uses include river tables, embedding pictures or embedding solid objects into a desired surface, casting figurines, jewelry making and more. Because this is a thick pour epoxy resin, it cures very slowly. Cure times can be 36-48 hours depending on temperature, which is quite a bit longer compared to a coating epoxy like our Table Top & Bar Top Epoxy.

Family Owned Business, Made In USA

VARIETY OF APPLICATIONS

For Uses On

• Wood
• Jewelry
• Bottle Caps
• River Tables
• Live Edge Tables

Low Oder, Zero VOC, Low Heat

• 100% Solids
• Low Oder
• Zero VOCs
• Low Exotherm
• Minimal Shrinkage

TOP QUALITY

Incredible Solutions Table Top Epoxy is proudly MADE IN THE USA.

Knowledgable Technical Support helps plan and troubleshoot even the most complicated projects.

Product description

1405604 features: -epoxy.-Can be applied underwater and cures underwater.-Will not shrink or expand.-Resists solvents, moisture and impact.-Bonds metal, glass, ceramic, plastic, tile, PVC pipes, copper pipes, brass pipes and galvanized pipes.-Sets in 50 minutes.-0.85 oz.-Carded.

From the Manufacturer

For over 50 years, Loctite has provided customers with advanced adhesive and sealing solutions. Loctite Marine Epoxy is a permanent, waterproof adhesive. This unique 2-part formula is ideal for projects requiring high bonding strength on surfaces exposed to water immersion. The adhesive can be applied and will cure underwater. Use Loctite Marine Epoxy for a permanent bond on glass, metal, wood and other common materials. Our uncompromising level of quality and innovation is achieved through a strong commitment to research and development. This commitment to innovation, quality and reliability has truly earned Loctite the reputation of delivering "Trusted Performance. Proven Results".

• Machinable, won't crack when drilled
• Water and solvent resistant, highly durable
• Does not shrink, one-time application
• Convenient syringe dispenses equal amounts of each component every time
• Apply and cure under water, eliminates the need to drain out water before fixing

User questions & answers

Question:	I need to seal a steel carburetor crack do resist gas
Answer:	I would use J. B. Weld for that.
Question:	Is this non-toxic? or food safe
Answer:	Definitely not. I'd use 100% silicone for repairs where food safety is a requirement.
Question:	Would this work for a hairline surface crack in an acrylic bathtub
Answer:	Sure try it, I had some on a crack in a Dishwasher tub bottom for 2 years before the rest of the dishwasher gave out. It was on a hole about the size of a pea.
Question:	What is the working temperature
Answer:	I have used it from 40 degrees F up to 110 degrees F. No appreciable difference.

Product features

Marine Epoxy

Product description

Permatex's Permapoxy Black Plastic Weld is a structural adhesive designed for general purpose bonding of a wide variety of materials. Black Plastic Weld forms a tough, durable bond to most plastics, composites, ceramics, and wood in any combination. It is a fast-curing product with gelling of mixed adhesive in 5 to 6 minutes and fixturing in 9 to 10 minutes. Bonds hard and soft plastics to specified surfaces, and requires no primers. Sets in five minutes at room temperature, with a temperature range of -60 degrees Fahrenheit to 250 degrees Fahrenheit (-51C to 121C). Permanent strength up to 3500 PSI, and gap filling to 0.125 inches. This epoxy is water resistant, with good chemical resistance. Suggested Applications: Bonds rigid materials including ABS, acrylic, fiberglass, FRP, glass, PVC, SMC, steel, styrene, vinyl, and wood. NOTE: Permatex Black Plastic Weld will not bond polyethylene and polypropylene plastics.

• Structural adhesive designed for general purpose bonding of a wide variety of materials
• Forms a tough, durable bond with a permanent strength up to 3500 PSI
• Fast-curing product sets in five minutes at room temperature
• Bonds most plastics, composites, ceramics, and wood in any combination
• Gap filling to 0.125 inches

User questions & answers

Question:	can this be used to fill in deep scrapes in a bumper
Answer:	I don't think I would use it for that. This epoxy will harden to a durable hard plastic, much like ABS. Although it does have some elasticity it's really designed for more rigid applications than a typical bumper cover. This is great for repairing things like cracked or broken plastic as might be found in car dashboards or appliances. It could even be used to rebuild areas that have missing areas.
Question:	Is this product heat resistance? I need something to repiar holes in a plastic solar water heater
Answer:	I used this on some hub covers of my truck lug nuts. it is very hard when cured. Only good if fresh shelf life bad. make sure you ruff things up to bond to your piping or what ever.
Question:	My hardshell bag was slit during handling - 2", sides could be fitted together. The shell has give in that spot. Will it hold up to baggage handling
Answer:	If the hardshell has some good years of use ahead, I would give it a try. My experience with the product is that it held up very well in repairing a cracked door that gets a good deal of use. How it will hold up depends on how well the material is applied and how much rough handling the bag gets, among other things. Good luck.
Question:	Is the final color actually black
Answer:	Yes. A matte black

Product features

Permatex Permapoxy Black Plastic Weld

A structural adhesive designed for general purpose bonding of a wide variety of materials. Black Plastic Welder forms a tough, durable bond to most plastics, composites, ceramics, and wood in any combination. It is a fast curing product with gelling of mixed adhesive in 5-6 minutes and fixturing in 9-10 minutes.

NOTE: will not bond polyethylene and polypropylene plastics.

Automobile Suggested Applications: Bonds rigid materials including ABS, Fiberglass, PVC, Vinyl, FRP, Acrylic, Glass, Styrene, Wood, and SMC.

Product description

J-B Weld is The Original Cold Weld two-part epoxy system that provides strong, lasting repairs to metal and multiple surfaces. Mixed at a ratio of 1:1, it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing. At room temperature, J-B Weld sets in 4-6 hours to a dark grey color. A full cure is reached in 15-24 hours. J-B Weld has a tensile strength of 3960 PSI and sets to a hard bond overnight. It can withstand temperatures up to 550ºF when fully cured.

• J-B WELD ORIGINAL: The Original Cold Weld two-part epoxy system that was designed as an alternative to torch welding. J-B Weld Original provides strong, lasting repairs to multiple surfaces and creates a bond stronger than steel. Perfect for DIY household, automotive, marine, craft repair and much more.
• CURE AND SET TIME: After mixing the tubes at a 1:1 ratio, it takes 4-6 hours to set and 15-24 hours to cure. Once cured, J-B Weld Original can be tapped, filled, sanded, molded and drilled. J-B Weld Original’s set and cure color is dark grey.
• VERSATILE & DEPENDABLE: J-B Weld Original is steel reinforced, has a tensile strength of 5020 PSI and can withstand temperatures up to 550 degrees Fahrenheit (287 degrees Celsius). When fully cured, J-B Weld Original is waterproof and resistant to petroleum, chemical and acid.
• SURFACE APPLICATIONS: Metal, Plastic & PVC, Wood, Concrete, Ceramic & Tile and Fiberglass.
• DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond.
• Will set in 4-6 hours, and cure in 16-24 hours
• Waterproof, petroleum, chemical, and acid resistant when fully cured

User questions & answers

Question:	Could this be used to fix a small (1 x 1/4 inch) crack in a dryer drum? Is there danger it will come off on the clothes
Answer:	When I have had questions about JB Weld products I have called JB Weld & they have answered with good information. Your problem is special because of the temperature that the drum attains. Ask JB Weld.
Question:	Is this product electrically conductive
Answer:	It is NOT electrically conductive. JB Weld is classified as an insulator my the manufacturer (see JB Weld FAQs). In fact it's rated to be microwave safe. Metallic conductors should never be used in a microwave oven, but JB Weld is OK for microwave use.
Question:	I have a number of small leaks in an older aluminum boat-- would JB work for a repair on this as a weld/filler for small punctures? thanks
Answer:	This is a general purpose epoxy that worked great for me on cast iron. It does say you can use it for marine purposes, however you might also consider their product made specifically for water:http://www.amazon.com/J-B-Weld-8277-Water/dp/B000BRQ0TW/ref=sr_1_5?ie=UTF8&qid=1392730373&sr=8-5&keywords=jb+weldor look into the Permatex product made specifically for metalshttp://www.amazon.com/Permatex-84109-PermaPoxy-Minute-Multi-Metal/dp/B000ALDXV2/ref=sr_1_1?ie=UTF8&qid=1392730252&sr=8-1&keywords=metal+epoxy
Question:	block crack between cyls 5 & 7 against the head, at the narrowest point between cyls. both cyls are sleeved. will jb hold the temp without breaking do
Answer:	thanks gpower. was looking online at the temp ratings of different epoxy products, actually found one @2100F, but with low tensile strength. I would like to stay away from welding as the crack is five eights long and sleeved at each end. just now pressure testing and the waterjacket has held 30 lbs for 12 hrs. I may also entertain some of the hi-tech block sealers, if it continues to hold pressure. thanks again for your input, and wish me luck putting life back in this old hemi. Dean

Product features

Original Twin Tube Epoxy

J-B Weld is The Original Cold Weld two-part epoxy system that provides strong, lasting repairs to metal and multiple surfaces. Mixed at a ratio of 1:1, it forms a permanent bond with tensile strength of 5020 PSI after curing. At room temperature, J-B Weld sets in 4-6 hours to a dark grey color and fully cures in 15-24 hours.

Additional Attributes

• Can withstand 550°F/287°C
• After curing, J-B Weld Original can be drilled, tapped, filed, sanded, molded and shaped.
• J-B Weld Original is waterproof, petroleum, chemical and acid resistant once fully cured.
• Surface Applications: Metal, Plastic & PVC, Wood, Concrete, Ceramic & Tile and Fiberglass.
• Use On: Household, Automotive, Marine, Plumbing, Crafts, Outdoor Equipment, Agricultural Equipment, Motorcycle, Toys, Boats, Personal Watercraft, In/Outboard Engines and Deck & Hull Accessories.

Product description

What do an art painter and a cook have in common?

They both need a tool to measure and mix their materials and ingredients!

Prepstor’s disposable clear plastic mixing cups can be used by both a painter and a baker, to mix paint, stain or epoxy resin and to measure liquid or dry ingredients respectively.

How is that possible?

Our graduated plastic cups have 3 absolutely accurate measurement unit designs on them, so that you can measure ounces (up to 8oz), cups/pints and ml (up to 250ml).

Additionally, the practical shape provides you with easy access and the crystal clear plastic walls provide you with an excellent visibility of the color and consistency of the content.

In this way, you can control the amount of the ingredients you use while you cook or bake. At the same time, you can reduce your paint waste and mix paint without making a mess.

Prepstor is the best choice for you!

Why? Because our food-grade resin mixing cups are made with premium quality plastic that is incredibly durable, so it can be used repeatedly.

However, this plastic material is also recyclable, so you can use the paint measuring cups just once and throw them away without feeling guilty.

Save time, effort and money with one click!

Buying these reusable plastic measuring cups will save you time, effort and money all at once! We’re absolutely serious and here’s why:

The three measuring scales will help you measure ingredients accurately and in no time.

The clear plastic walls and wide shape will help mix paint, stain, epoxy, and resin and control their color and consistency effortlessly.

Finally, our 20- pack will help you save money, since you won’t have to buy new resin paint mixing containers anytime soon.

Don’t waste another minute!

Click “Add to Cart” and get Prepstor’s durable plastic mixing cups NOW!

• MESS-FREE PAINT MIXING: Whether you’re a professional painter or you simply create art just for fun, Prepstor can make things much easier and less messy for you. Our 20-piece set of clear mixing plastic measuring cups will help you mix colors and painting materials, and reduce paint and resin waste at the same time!
• 3 MEASURING SCALES THAT SAVE YOU TIME AND EFFORT: The most practical feature of the Prepstor plastic paint cups is their measurement scale design. More specifically, each one of the 20 graduated mixing cups has 3 accurate measurement scales on them that help you measure ounces, cups, or even ml volumes.
• ABSOLUETLY USEFUL FOR MEAL PREPARATION AND BAKING: These durable plastic mixing containers are not used only for paint, stain and epoxy resin. In fact, the multipurpose 8oz measuring cups allow you to measure any liquid or dry ingredient with high accuracy when you prepare a meal or delicious baked goods.
• USE THEM ONCE OR OVER AND OVER AGAIN: Prepstor’s graduated clear cups are made with top quality plastic that is recyclable and very durable. The premium material makes it possible to either use the calibrated measuring cups for resin just once and then throw them away, or use them over and over again.
• SPEND LESS AND GET MORE: Are you still trying to decide which disposable resin mixing cups to buy? Prepstor does not only give you the most durable plastic cups on the market, but we also give you a 20-piece value pack that saves you money and allows you to always be prepared, whether you’re cooking or painting.

User questions & answers

Question:	If I let paint dry in these will it peel out of the cup easily
Answer:	I have not tried that. But they seem to be a plastic that would do that. Sorry for the vague answer.
Question:	Are the measurement marking on the inside or outside of the cup? As in, is the inside perfectly smooth
Answer:	Printed on the outside, inside is smooth. The bottom does have a structure ring like most plastic cups.
Question:	How do you clean them? Soap & water? Happy pouring & Thanks
Answer:	Honestly.... they are so thin that they are not worth cleaning... I typically leave a popsicle stick that I used for stirring in the cup so that when it dries I can just get it out with the dried resin... but these are disposable for a reason for sure! Super thin...not worth re-using.
Question:	Where are these made
Answer:	The bar code prefix (first three numbers) on my order received is 860 which means Serbia & Montenegro by GS1. Upon reading up on bar codes/ UPC labels, that identifies the country of origin where the manufacturer handles the product but, may not actually make the product. Confusing, I know.