11 best pocket knife sharpeners

• 6 FUNCTION: 1. No. 1 V-Notch slot (Coarse CARBIDE)-Quickly set a new edge; 2. No. 2 (Fine CERAMIC)-Hone for a smooth finished edge; 3. Tapered diamond rod (Medium 400 Grit) for serrations & gut hooks; 4. Diamond rod with groove for fishhooks; 5. Ferro rod; 6. High-pitched emergency whistle
• A portable EDC field tactical knife sharpener with built-in lanyard hole, ideal for hunting, camping, outdoor survival use. It also works well for your kitchen chef knife.
• DURABLE ABRASIVES & SUPERIOR SHARPENING PERFORMANCE: The CARBIDE and CERAMIC abrasives pass 10,000 times field use test. NEVER WEARS OUT. Preset optimal sharpening angle.
• VERSATILE & EASY USE: This pocket knife sharpener not only quickly sharpens very dull or damaged blades, but also hone for razor sharp; Not only for straight edge but also serrated knife.
• 3 YEARS Warranty and Superior After-Sale Service: Sharpal headquarters in CA, US with overseas branches in Germany and Australia, aiming at providing consumers with an easy and cost-effective way to obtain a sharp edge. Manufactured and field-tested to the highest standards.

User questions & answers

Question:	Can this be used on Scandinavian grind
Answer:	Yes, it can. Thank You!
Question:	Can it sharpen a big knife
Answer:	Yes from large to small I have had no problems... Works best if used regularly & not wait til it rounded edge dull... Just a few swipes every week or two will keep the blade sharp... Remember do not over sharpen, a wire edge is super sharp but dulls very quickly, just keep sharpened to required cutting satisfaction....
Question:	What is the inclusive angle of this sharpener? The edge of my knife has a 30 degree inclusive angle 15 degrees on each side
Answer:	The Stage 1 (coarse sharpening-carbide blades) sets at 40 degrees total or 20 degrees per side. The Stage 2 (fine honing-ceramic blades) sets at 50 degrees total or 25 degrees per side. This item can sharpen your knife of 30 degrees total. However, to work perfectly on knives of approx. 30 degrees total, we suggest to use Sharpal 104N Professional 5-In-1 Knife & Scissors Sharpener (ASIN: B01L8QTE92) ASIAN slots. Thank you!
Question:	Can you buy replacment spark rods
Answer:	No, we don't sell replacements. However, you can get the replacement of fire starter if it fails within one year as we offer 1 Year Limited Warranty service.

Product features

SHARPAL 101N 6-In-1 Knife Sharpener & Survival Tool

Multifunction

6 Function

• Tungsten carbide blades: quick edge setting
• Ceramic blades: fine honing
• Fire starter
• High-pitched emergency whistle
• Tapered diamond rod (Medium 400 Grit): sharpening serrations, gut hooks
• Groove in diamond rod: sharpening fishhooks, pointed tools

Premium Abrasive Material

10000 Times Tested

1. Pull the knife blade through the two sharpening slots 10000 times each
2. No break found in both 1 tungsten carbide and 2 ceramic blade

Portable

It measures 3-1/2 inches long and 1-2/5 inches wide, and it weighs only 1.5 ounce.

Soft Grip

Soft rubber coated design for comfortable grip

Two Sharpening Slot

1. Insert blade fully and vertically into appropriate sharpening slot at a 90 degree angle to the sharpener.
2. Gently with light pressure pull the knife blade from heel to tip in direction of indicator arrows.
3. Repeat above action until blade is sharp

Tapered Diamond Rod

1. Put end of the rod against the cutting edge of the serration or gut hook. Match grind angle.
2. Push the rod through the serration or gut hook while applying moderate pressure and rolling the rod as you push. Repeat until cutting edge is sharp.
3. Hone the serrations by pulling blade through No. 2 ceramic slot

Fire Starter

1. Place the tinder in the middle of your clearing, on the ground or on a bed of dry twigs if the ground is wet.
2. Fully insert the fire stick into No. 1 carbide slot and pull the fire stick quickly through the slot in direction of indicator arrows.
3. Repeat pulling the fire stick through the No. 1 slot quickly until the tinder ignites

Emergency Whistle

Position lips over opening in upper left of product and blow vigorously.

Do NOT cover the air outlet on the top of product.

Product description

Smith’s “Pocket Pal” Multi-Functional Knife Sharpener features pre-set crossed carbides and ceramic stones, which provide the “Perfect Edge” every time. Carbides provide quick edge setting, and the specially shaped ceramic stones are designed to give you a razor sharp edge on either standard or serrated edges. A fold out, tapered round, diamond coated rod is designed for sharpening serrations and small gut hooks.  Unit is compact, lightweight, durable, and comes with a lanyard hole.

Carbide Blades (COARSE) - Set the edge. The carbide blades provide quick edge setting capability for dull or damaged knives. These blades are designed for use on straight edges only, and are reversible and replaceable.

Ceramic Stones (FINE) - Finish the edge. Ceramic stones provide a smooth, polished edge for already sharp knives and can be used on serrated or standard blades and are reversible and replaceable.

Abrasives: Tapered Diamond Rod: MEDIUM (400 Grit) /Carbide Pull-Through slot: COARSE/ Ceramic Pull-Through slot: FINE (800 Grit)

Sleek and slim, Smith's Pocket Pal multi-functional knife sharpener is ideal for backpackers, hikers, hunters, and fishermen who want to ensure their blades have the sharpest edge wherever they roam.

From the Manufacturer

Smith’s PP1 “Pocket Pal” Multi-Functional Knife Sharpener features pre-set crossed carbides and ceramic stones, which provide the “Perfect Edge” every time. Carbides provide quick edge setting, and the specially shaped ceramic stones are designed to give you a razor sharp edge on either standard or serrated edges. A fold out, tapered round, diamond coated rod is designed for sharpening serrations and small gut hooks. Unit is compact, lightweight, durable, and comes with a lanyard hole.

• Tapered Round Diamond Coated Rod for Sharpening Serrated and Standard Edges
• Carbide Blades (Coarse CARBIDE Slot) Quickly Set Your Edge; Ceramic Stones (Fine CERAMIC slot) Give You a Razor Sharp Edge
• Reversible and Replaceable Carbide and Ceramic Stones for Extended Sharpening
• Lanyard hole for Carrying
• Preset Sharpening Angles provide Guaranteed Results

User questions & answers

Question:	Will this change the angle of my knife? I have a Morakniv Classic no. 1. With this work and get it razor sharp like it came from the factory
Answer:	Yes it will that sharpener with static angle.Its good as emergency sharpener.If you need to keep original angle you should invest money for more expensive stuff with multy stones.Sry for my bad English.
Question:	Which side is the corse and which is the fine
Answer:	makes no difference thick or thin blade ,1st use sharpening rod then carbide ,then finish w/ ceramic . The sharpening rod must b used properly !!!
Question:	I have various knives wit different steels: SR 101, 1095, 1075, 420 HC, S30V. Will this sharpener be able to sharpen all of the steels above
Answer:	Hello Kyrylo,In my limited experience there are two principal factors in blade's sharpening. One and the most important is the hardness of the abrasive material (this is the material that you will use to abrade) the abrasive material must be harder than the metal of the blade, so it can erode the blade, until the blade takes a good edge. The other matter is the grain size of the abrasive material, if the size is small, the edge will be thinner and sharpen but it will take much longer to erode the steel, larger grain size will leave a coarse finish but the erotion part is considerably faster.If you are wondering if the carbide stone may abrade any of those steels... my answer will be a resounding yes. This material is one of the most hardest materials ever made and is almost or equal as hard as a diamond, there is no steel made by man that can achieve such hardness. But don't trust me, go and investigate about hardness. I recomend you to search the hardness tables of scales like Rockwell or Vickers, the manofacturer of the steel can provide you the info. You just need to compare the hardness of the steel and the stone.Finally I have a really good experience with this sharpener, as you may read in the description of it, the carbide stone sets the edge of the blade, and the ceramic stone finish the work, this is beacuse the ceramic stone has a smaller grain size than the carbide. And this is a pocket sharpener, to make quick repairs on the edge of modest knifes (like a bowie style and smallers) it's not for heavy duty. I hope I have been helpful. Best regards.
Question:	Does it work on Samurai swords? I do a lot of work with those with my friend Bill, they tend to dull fast and require frequent sharpening
Answer:	It should work fine on a Hattori Hanzō sword.

Product features

Be Sharp. Be Ready.

About Smith’s:

From our humble beginnings as a small Arkansas stone company to our current position as the market leader in the knife and scissor sharpening category, Smith's has become the fastest growing, full line supplier of great sharpening products. Our simple goal is to provide consumers with the best edge for whatever task they are performing, while also providing outrageously good customer service.

The Smith's Difference:

We have the broadest line of knife and scissors sharpeners available, ranging from simple, fixed angle pull through sharpeners for consumers that want quick and easy sharpening, to sophisticated Precision Kits designed for the knife sharpening enthusiast. Our offering includes both manual and electrical sharpeners that incorporate many different abrasive materials including diamond, carbide, ceramic, bonded synthetic abrasives and, of course, natural Arkansas stones.

Smith’s PP1 Pocket Pal Multifunction Sharpener

The Pocket Pal features a fold out, tapered round diamond coated rod for sharpening serrated and standard edges, pre-set carbide blades for quickly restoring a dull edge, and specifically shaped ceramic stones for a razor-sharp finish. The carbide blades provide quick edge setting capability for dull or damaged knives, blades are designed for use on straight edges only. Ceramic stones provide a smooth, polished edge for already sharp knives and can be used on serrated or standard blades. Both the carbide blades and ceramic stones are reversible and replaceable for extended sharpening life.

The Pocket Pal measures 3-1/2 inches long and 1 inch wide, and it weights just 1 ounce. Always clean your sharpener with a damp cloth after use and towel dry. Do not rinse with water.

Sharpening Slots:

1. Insert knife blade into the V-shaped slots at a 90-degree angle to the sharpening blades or stones.

2. Pull the knife blade straight back towards you while applying light pressure.

3. Repeat this action until blade is sharp.

Tapered Diamond Rod: Flat Edges

1. Always hold the unit with the rod facing down. Place heel of the blade on the diamond rod closest to the unit.

2. Hold blade at a 23-degree angle to the rod.

3. While applying light pressure, push the knife away from you towards the end of the rod. Draw knife down so that the tip of the blade comes off the end of the rod. Repeat this action until blade is sharp.

4. For the other side of the blade, you will need to switch hands holding the sharpener and the knife and repeat step 1 through 3.

Tapered Diamond Rod: Serrated Edges

1. Only sharpen the side of your knife edge with the serrations.

2. Hold rod at 23-degree angle to the blade and move it back and forth through each serration until sharp.

Product description

Great for field repairs on all types of blades. Works with standard blades, serrated blades , gut hooks, and fillet knives. Features a tungsten carbide sharpener, ceramic sharpening rods (1000 grit), serrated knife sharpener, and diamond tapered rod (600 grit).

• Imported
• Field repairs on all blades
• Works with standard, serrated, gut hook, and fillet knives
• Carbide, ceramic, and diamond sharpeners
• Tungsten Carbide-Three Or Four Strokes Will Restore Your Blade
• Ceramic Sharpening Rods-Polist To A Finished Edge In Three Or Four Strokes
• Serrated Knife Sharpener-Designed To Get Inside Even The Smallest Serrations

User questions & answers

Question:	Can I sharpened serrated steel knife with it
Answer:	Yes you can. The sloped edge of ceramic is the main sharpener for serrated knives. One can also use the diamond rod, if the serration needs a more aggressive approach.
Question:	Will this sharpen a ceramic knife
Answer:	The label "ceramic" on one of the slots does not refer to the type of blade the slot is intended to sharpen; it refers to the type of sharpening media in the slot. As Frazz stated, the slot is intended to sharpen steel blades.
Question:	is this better than the pocket pal 1 by Smith's....or about the same
Answer:	I haven't used the pocket pal so it wouldn't be fair for me to say but I've used several different lansky products & they are worth the money.
Question:	Knife noob here. What's the use of each 3 sharpeners? As in, which do I use and for when
Answer:	I just want to correct some misinformation in the answers here. Bob Graham - "The graphite (black) rods". LOL, the black material is not graphite. Graphite would disintegrate instantly and sharpen nothing. The black material is tungsten carbide and meant for reshaping a seriously dull blade or nicks and dings. "Tungsten carbide is approximately twice as stiff as steel, with a Young's modulus of approximately 530–700 GPa (77,000 to 102,000 ksi),[4][7][8][9] and is double the density of steel—nearly midway between that of lead and gold. It is comparable with corundum in hardness and can only be polished and finished with abrasives of superior hardness such as cubic boron nitride and diamond powder, wheels, and compounds." The stuff is used for coatings on industrial cutting tools and it is MUCH harder than any knife steel you will ever own. So why don't they make knife blades out of the stuff? Because it's also very brittle. Tungsten carbide is sometimes added as a thin coating on cutting tools. Henry H. - The long tapered ceramic piece mounted at a slope isn't just for serrations. That can also be used for freehand sharpening instead of or after you use the ceramic V-Notch. That's what I use it for. I find the V-Notch has trouble getting the full edge of the blade to and even sharpness and it will leave a thin strip of metal at the edge of the blade. On a bench you'd normally remove that thin metal at the end of the sharpening process by using a leather strop to work that thin waste metal back and forth until it just falls off. But in the field, you don't have a strop available. Hint, after you use the V-Notch run your thumb nail from the the top of the blade towards the bottom until your thumb nail runs off the bottom edge (away from the cutting edge). Do this on both sides in several spots. On one side or the other you'll feel a very slight "catch" as your thumb nail passes off the edge of the blade. That slight "catch" you're feeling is the little wavy sliver of waste metal at the very edge of the blade. That needs to be removed for a razor sharp edge. This is where the big ceramic honing stone comes in. CAREFULLY hold the sharpener with the ceramic pointing down and away from you and drag the blade down and away from the hand holding the sharpener. It doesn't take much pressure. Do one side and then flip the knife over and do the other side. Keep flipping it back and forth and polishing the edge with light strokes until you can no longer feel your thumb nail catch anywhere along the length of the blade. What you are doing is bending that waste metal back and forth until it falls off, leaving the blade at an almost perfect smooth point. That's about as sharp as you can get a blade. And this will get you to about 90% - 95% of the sharpness I can achieve with a whetstone, oil, and a strop on a bench. It sounds like it takes a long time but in reality it takes maybe a minute or two to keep a blade in shape using the ceramic V-Notch and the large freehand ceramic stone. That's why I love this thing in the field. It ain't perfect but it's quick and easy when you're miles away from a full sharpening setup and you need an edge NOW.

Product features

Blade Medic 4 in 1 Knife Sharpener

The first responder for field repairs on all types of knife blades. It’s like having an entire sharpening kit right in your pocket. Refresh regular or serrated blades, gut hooks, hunting, fishing, and more.

Tungsten Carbide V

Just three or four strokes will restore your blade.

Ceramic Finishing

Polish to a finished edge in three or four strokes.

Serrated Knife sharpener

Designed to get inside the smallest serrations.

Diamond tapered Rod

For fast reconditioning of gut hooks and serrations.

Product description

Smith’s 2-Step Knife Sharpener features two tungsten carbide blades with pre-set angles to ensure the perfect edge every time. Three or four strokes through the carbide sharpening slots will restore the edge on a very dull knife. The two crossed ceramic rods also have pre-set angles and provide a smooth finished edge to already sharp knives. It is lightweight, portable, comes with a lanyard hole, and has non-slip rubber feet for added safety. Excellent for use on all types of knives, especially filet knives.

From the Manufacturer

Smith’s CCKS 2-Step Knife Sharpener features two tungsten carbide blades with pre-set angles to ensure the perfect edge every time. Three or four strokes through the carbide sharpening slots will restore the edge on a very dull knife. The two crossed ceramic rods also have pre-set angles and provide a smooth finished edge to already sharp knives. Excellent for use on all types of knives, especially fillet knives.

• Crossed Carbide Blades Provide Quick Edge Setting
• Crossed Ceramic Rods Provide a Razor Sharp Edge
• Preset Sharpening Angles Provide Guaranteed Results
• Non-Slip Rubber Feet for Added Safety.
• Excellent for use on all types of knives, especially filet knives

User questions & answers

Question:	Can i use this on a karambit
Answer:	if the karambit has a narrow enough edge then this could be an ideal way to sharpen a curved blade. But if It looks like if the karambit has a thick blade, then perhaps the sharpener will not let the knife edge down into contact with the sharpening edges. The karambit on Wiki looks too thick to fit into this sharpener.
Question:	Is this good for regular pockey knife? Is the stone better
Answer:	This works great for knives. We're very happy with it. If you're after a professionally sharp edge, nothing can beat a stone. If you just want an excellent, sharp edge, this is fast and almost as good, IMHO.
Question:	Will this sharpen scissors
Answer:	When looking at only one of the blades of your scissors, only one side of that blade has an angled edge on it. This is made for blades with an angle on each side of the blade, like a normal knife. i would assume it would ruin the angle of the blade on the scissors.
Question:	what is the angle of the sharpener Thanks
Answer:	They are fixed at a 46 degree sharpening angle (23 degrees per side).See the blog @ http://www.edgeexperts.com/2010/12/21/2-step-knife-sharpener-sharpening-big-game-hunting-knives/

Product features

Smith’s

Smith’s has been a trusted name in the sharpening industry for over 125 years. Throughout our history, we have been focused on a single mission: Provide our customers and consumers with the best value in easy-to-use and effective sharpening and specialty tool products. Our continued focus on this mission has led us to top of our industry as the leader in the manufacture and distribution of manual sharpening products.

Smith's 2-Step Knife Sharpener

Smith’s 2-Step Knife Sharpener features two tungsten carbide blades and two ceramic rods with preset sharpening angles for the perfect edge every time. Three or four strokes through the carbide sharpening slots will restore the edge on a very dull knife in seconds. The two crossed ceramic rods are preset at the correct finishing angle after setting the edge and are also good for a quick touchup of already sharp knives.

This easy to use, pull-through knife sharpener is lightweight, compact, portable, and comes with non-slip rubber feet for added safety. It is excellent for use on all types of standard edge knives, especially fillet knives.

• 3-STAGE SHARPENING TOOL: Tungsten carbide blades for quick edge setting; Ceramic blades for fine honing; Special tungsten carbide blade for scissors grinding. 3 parts to meet all your sharpening needs.
• STRONG SUCTION BASE: The suction force of this product is twice that of other similar products. This increases your safety during the sharpening process.
• EASY TO USE: You just need to put it on a smooth desktop and press the black switch. It will suck very strongly on the table. Then you can start to sharpen the knife. You don't need to hold it with your hands. So your hand is very safe.
• SMALL SIZE: You can even hold it with one hand. This small size allows you to conveniently store it. It won't take up too much space in your kitchen.
• 3 YEARS Warranty and Superior After-Sale Service: Sharpal headquarters in CA, US with overseas branches in Germany and Australia, aiming at providing consumers with an easy and cost-effective way to obtain a sharp edge. Manufactured and field-tested to the highest standards

Product features

SHARPAL 191H Pocket Kitchen Chef Knife & Scissors Sharpener

• Tungsten carbide blades for quick edge setting; Ceramic blades for fine honing
• Specially designed tungsten carbide blade to sharpen scissors fast and easy
• Preset optimal sharpening angle
• High quality rubber base provides powerful suction

Multifunction 3 Slot

1. No. 1 V-Notch slot (Coarse CARBIDE)-Quickly sharpen and repair dull or damaged knife blade
2. No. 2 V-Notch slot (Fine CERAMIC)-Finely hone, polish and remove burrs for an already sharp knife. Use this only to sharpen serrated knife blade
3. Exclusive Design of Tungsten Carbide-Quickly and easily sharpen scissors

Powerful Suction Cup

The suction is two times stronger than other similar products for safer one handed use.

Premium Abrasive Material

10000 Times Tested

1. Pull the blade through all sharpening slots 10000 times each
2. No break found in all sharpening abrasive material

Compact Size

Measures Dia. 2.75inch / 7cm x H 2.32inch / 6cm.

Small enough to store anywhere

Household / Kitchen Straight Edge Knife

• Chef Knife
• Paring Knife
• Peeling Knife
• Utility Knife
• Slicing Knife
• Santoku Knife

Outdoor / Sporting Straight Edge Knife

• Pocket Knife
• Hunting Knife
• Fillet Knife
• Tactical Knife
• Fixed-Blade Knife

Serrated Knife

Use No. 2 CERAMIC slot only to sharpen your serrated edge knife.

• Steak Knife
• Bread Knife

Scissors

• Scissors (can NOT work on sewing scissors)
• Shears

Product description

Soft Arkansas (Medium): This is the coarsest, most versatile and most popular of the Arkansas stones. Soft Arkansas stones are used to quickly put an initial edge on dull or neglected knives or other cutting tools. This is a natural stone and color can vary from white to gray/black to pink/gray, or a combination of these colors in a single stone. Genuine Arkansas stones are 100% quarried in the Ouachita Mountains of central Arkansas. They are highly sought after worldwide for their superior ability to sharpen knives and woodworking tools, as well as to put surgical quality edges on a wide variety of instruments Arkansas stones produce these fine edges s with less wear that man-made stones. Arkansas stones are classified as Novaculite, which is extremely hard and fine grained rock containing almost pure silica. These stones are classified in 4 grades and progress from Soft to Hard to Translucent and finally to Black. Each grade is based on the specify gravity or density of the mineral and not the “grit” or particle size. The grades with more dense or tightly packed particles will produce a finer or sharper edge. In addition, stone grades are not determined by color, as color alone will not differentiate the hardness of different stone grades. Each grade may contain any of the following colors: black, blue-black, charcoal, grey, white, multi-color, brown, pink or red, or a combination of these colors in a single stone. These stones come in a leather pouch to protect them when not in use. All Arkansas stones work best with light mineral honing oil to suspend the metal particles produced by the sharpening process which prevents clogging of the pores of the stone.

• Soft Arkansas pocket sharpening stone is 3 inches long by 1 inch wide by 1/4 inch thick
• Coarsest, most versatile stone used to quickly put an initial edge on dull or neglected edges
• Color can vary from white to gray/black to pink/gray, or a combination of these colors
• Genuine Arkansas stone is 100% quarried in the Ouachita Mountains of Central Arkansas
• Come in a leather pouch to protect when not in use.

User questions & answers

Question:	what's the difference between the medium, fine, and ultra fine stones
Answer:	Thank you for checking in. The difference is how coarse the stone is. In the order you have them listed they are going from coarsest to finest. You'll use the coarsest stone to repair or create an edge - the finer stones refine the edge more making it sharper. The process is similar to what you do with sandpapers on wood. Hope that helps. Feel free to contact me via my sellers link if you have other questions I'm happy to help out.
Question:	Can it be used to sharpen a ka-bar knife? i just got one for christmas. it has a partial serration
Answer:	Yes. You can sharpen the NON-serrated portion of the blade well with this stone. You should not use a stone or any flat sharpener on the serrations you can round off the tips of the serrations if you’re not careful.
Question:	What grit is this stone
Answer:	Thanks for checking in. Dan's Whetstones lists this stone in the medium grit range which they say is 600-800. It is the most popular stone grade and it a good general purpose stone. It is important to note that Arkansas stones are not graded by grit but by their specific gravity. Less dense stones perform more coarse and more dense stones perform finer. You can read about how the stones are graded on Dan's Whetstones site - search for Stone Grades 101. Feel free to contact me if you have other questions, happy to help out.
Question:	I am a novice at sharpening pocket knives. i have a few i have found that need sharpening. which grade of stone should i use and does this purchase co
Answer:	I carry this stone in my truck for a quick sharpen of my knives if need be for hunting/fishing needs. If you have really dull knives that need to be re-sharpened you'll need a much courser stone to start. Also, if you're a novice, you may want to start with at least an 8" combo stone. This one is much smaller and takes more care to use to avoid injury. Check out a Norton course/fine stone for starters. That is what I use for my knives at work and it works very well. I do own several Arkansas stones that I use for finer edges for my fine edged knives though.

• ✅ 〖Whetstone Knife Sharpening Stone〗 The Whetstone Sharpening Stone is made from professional grade white corundum corrosion & heat resistant, it is also very durable. This stone only requires water, no expensive honing oil needed! It’s a great choice for someone looking for a stone they won’t have to replace.
• ✅ 〖DUAL SIDED SHARPENING〗 Double sided for both Grits both 1000 and 6000, choose the appropriate grit stone according to your knife blade. The Coarse side 1000 to make the edge very sharp, and reflective. The Fine side 6000 is a very fine stone and provides a very polished edge that will cut extremely well.
• ✅ 〖VERSATILE KNIFE SHARPENING STONES〗 This whetstone can be used as a one-stop shop for any item you want sharpened and polished. It can sharp ANY BLADE out there, be it kitchen knives, Hunting Knife Sharpener, Pocket Knife Sharpener, Scissor Sharpener, Chisel sharpener, Blade sharpener, Razor & it can even sharp a axe!
• ✅ 〖GUARANTEE THE SAFETY SHARPENING〗 Keeping that knife's edge fine will make cooking safer. We understand the importance of safety when dealing with sharpening tools. That’s why we include a nonslip rubber bases, a bamboo stone holder and angle guide in every knife-sharpening kit. Minimize your risk of hazardous slips with Our Knife Sharpener Set!
• ✅ 〖DESIGNED for ULTRA-PRECISE SHARPENING〗 Even the best knives will eventually lose its cutting edge, and it is important to have a set of sharpening stones that suit your sharpening needs. When you want to guarantee peak performance from top-quality kitchen knives, this is the stone to use—it's designed for ultra-precise sharpening.

Product features

Every quality knife needs a quality Sharpening Stone to go with it.

What sorts of knives will you be sharpening? Kitchen? Western or Japanese? Hunting knives? Pocket knives?

It doesn’t matter what type of knife you need to sharpen, a quality sharpening stone is convenient, and can be used on just about any blade.

If you are fed up with working with dull kitchen knives or other types of cutting tools that have lost their sharp edge, the AHNR whetstone will bring the blades back to life.

You can use it on your hunting knife, pocket knife, cleaver knife, sushi knife, steak knife, and just about any other type of blade.

Two Side Grit Whetstone

Dual grit combination, premium material fist-class white corundum nice touching, easier and faster honing.

Whetstone Stoning Angle Guide

You can clamp the guider on the back blade and against the sharpener to sharpen your knife

Non-slip bamboo holder

Custom bamboo holder with non-slip silicone base. Ease and safe to use, helpful for regularly honing

Non-slip silicone base

Non-slip concavity design, fixed whetstone in one place. safety sharpening, nice cooking

• ✅ DOUBLE-SIDED SHARPENING ✅ The portable RAXMIN Diamond Folding 5" Knife Sharpener 400/600 Grit features a coarse side, and a fine side. Coarse 400 grit (38 micron) for quick edge setting; Extra fine 600 grit (23 micron) for honing.
• ✅DIAMOND-ELECTROPLATED ADOPTION✅ Ensure efficient and sharp sharpening result. Sharpens knives and tools faster than conventional stones with DMT's monocrystalline diamond surface. No oil is needed-sharpen dry or with water.
• ✅INTIMATE & PERFECT DESIGN ✅Surface is honeycomb, the interrupted sharpening surfaces allow you to speed up your sharpening by collecting the metal filings that accumulate. Stripe is on the handle which can play a important role in anti-skid. The design of concave and convex ombining on the tail end of handle prevents handle dislocation when you use it, and avoid s folder your fingers. The fan-shaped and folding const ruction provides great protection to the stones, preventing from damage.
• ✅ PORTABLE& SPACE SAVER ✅ Compared to the traditional knife sharpening system, RAXMIN folding sharpening tool is small but functional. Only 4.9inch length and 1.2inch height. Fit well in your pockets and bags. Folding handle is also an excellent extra.
• ✅ WIDELY APPLICATION ✅ -- Swiss Army Knife, metal knives, ceramics knives, scissors, outside tools, garden tools, agricultural tools. Your camping or home kitchen necessity.

User questions & answers

Question:	Will this scratch my blades
Answer:	no
Question:	Can this tool be used to sharpen Santoku knives
Answer:	This sharpening stick has 400/600 Grit, Coarse 400 grit (38 micron) for quick edge setting, Extra fine 600 grit (23 micron) for honing. It has widely application in swiss Army Knife, metal knives, ceramics knives, scissors, outside tools, garden tools, agricultural tools. Your camping or home kitchen necessity. If you need an sharpener for your expensive kitchen Knife, we recommend that you purchase another of our products, which has 400/1000 Grit to handle kitchen knives more efficiently. This global knife sharpener can sharp ANY BLADE out there, be it any kitchen knife set.
Question:	What are the grits for the stones and the ceramic rods
Answer:	To sharpen knives or scissors
Question:	Does this come with a case? Or do I need to buy one separately
Answer:	It comes in a case but does not need one as the blade is covered by the sides that close over the file.

Product features

Product Introduction

• ✓ ADJUSTABLE SHARPENING ANGLE -- Sharpen all of your knives with a single sharpener. Western style and Asian style knives are both OK. Adjust between 14-24 degrees of sharpening.
• ✓ HIGH DENSITY ABS PLASTIC -- Durable and shaped for maximum control and safety while sharpening.
• ✓ DIAMOND & CERAMIC SHARPENING TIPS -- Sharpen using long life materials that won’t dull your knife over time.
• ✓ STURDY HANDLE & UNDERSIDE GRIPS -- Non-slip rubber grips improve stability during sharpening. The handle is contoured to allow for a comfortable yet sturdy grip.
• ✓ DESIGNED IN THE USA -- Built with high quality, durable, safe, and long lasting materials.

User questions & answers

Question:	Does the sharpener sharpen serrated edge blades
Answer:	Some serrated knives have a one sided serration 8 to 10 teeth per inch Razor Sharp will not work the best.Serreated knives with double sides works ok.I sharpened successfully double edge 24 TPI & also 4 TPI, but set dial to narrowist
Question:	Does this sharpener have an instruction manual? Will it sharpen scissors
Answer:	Will sharpen scissors . Has instructions on unit.
Question:	Made in the USA
Answer:	No. Made in China. I believe Smith's is an American company though. The sharpener says they have been in business since 1866
Question:	Most if not all reviews are about kitchen knives. How does it do with pocket knives
Answer:	It works well on my pocket knife. There is an angle setting for pocket knives.

Product description

The Original Knife & Tool Sharpener is the first knife sharpener designed to sharpen every knife you own. Using flexible abrasive belts, the sharpener is able to sharpen not just straight bladed knives, but also curved knives, tanto blades, filet knives, serrated knives, gut hooks and virtually any other shape of knife blade. The Knife & Tool Sharpener uses precision angle sharpening guides to ensure that you get the proper angle every time. Two guides are included: a 50° guide for hunting and outdoor knives (25° per bevel) and a 40° guide for thinner blades and kitchen knives (20° per bevel). Professional knife makers use flexible belts to put a razor sharp edge on their blades, and now you can have the same technology at home to use any time your knives get dull. You may already have other sharpening methods, but never before has a knife sharpener been able to quickly and easily sharpen this broad range of knives to such extremely sharp results. Sharpening scissors requires the use of the scissor guide. Freehand sharpening cannot create the consistent edge necessary for scissors to cut. The scissor guide is set at 65° based on the most common scissor edge angles. The guide is designed for common "household" size scissors, including kitchen and shop shears. A 60° angled scissor guide is available on the optional 40° Outdoor Knife Guide. It is possible to regrind damaged scissor blades to 65° or 60° angle regardless of the original angle of the edge

• Sharpen every knife you own like a pro quickly, easily and with repeatable, consistent results. Creates the sharpest blades you've ever had!
• Easily Replaceable Abrasive Grit Belts. Comes with premium abrasive belts to meet all your sharpening needs: Coarse (P80), Medium (P220) and Fine (6000). Abrasive belts won't burn or damage blade steel during sharpening.
• Precision sharpening guides provide fast, easy, repeatable and consistent results. Kitchen Knife guide sharpens blades to a 40° angle – Outdoor Knife Guide sharpens to a 50° angle.
• Can also be used to sharpen a wide range of bladed shop tools and lawn and garden tools such as Lawn Mower Blades, Garden Pruners, Shears, Shovels, Scrapers and more. Also makes the ideal hand held detail grinder
• 1-year warranty – warranty only valid for North American 110v power source applications. Use of power converters for 220V not recommended. Can be run with 12V power inverter (min. 150 watt) from car, truck, RV, boat, etc.

User questions & answers

Question:	how about sharpening gut hooks on hunting knives...how hard is this to sharpen
Answer:	Its very flat I use the coarse and extra coarse to flatten water stones all the time. I would recommend them to anyone for just water stone flattening it works great but in also use it to sharpen with great results
Question:	Will this sharpen Japanese chef's knives that have a 30° (15° per side) angle
Answer:	You only get one but they show the 3 different grits. These aren't stones but rather diamond embedded steel plates.
Question:	Anyone know how this model differs from the ken onion edition for $130? is this model nearly as good at
Answer:	Here's the "what for" on this item You absolutely can sharpen any metal on this stone, but you will be limited to the actual sharpness and bevel width. This stone is made with larger diamonds than most coarse stones. Because of this, as well as its length and width (and skid-free bottom), it can take nicked and out-of-true edges and get them back on track very quickly (use water only, no oils). It is a 2X coarse blade, and awesome doing what it is intended to do (this includes grinding down chisels, whittling tools, whetstones, iron, steel, etc). It could be used to put a decent edge on your blade, but it really is limited to coarse work needed to prepare it for the proper stone; I recommend soft stones from Arkansas, they make great whetstones for fine honing, but any quality soft stone is the next step. To make this long answer longer, the reason the DMT is mentioned and recommended to flatten whetstones is that, again, the large diamonds go to work quickly and grind down uneven, pocked, or dipped anomalies on the much softer soft stones which makes plumbing a straight edge on a fine blade much more effective. So, basically, you keep the DMT to grind the soft stone to level, use it to work the blade to rid it of abnormalities, and then let that rejuvenated hard and straight blade make woo with that fine Arkansas (or personal choice of) whetstone (water, spit, and oil are optional). Sorry for the long story, take care of the ones you love, thank a vet, prepare, prepare, prepare, and have a great September; especially those of you who have the privilege of experiencing the changing of the colors! Also, it's the time of year we wait for; muleys, white tail, wapiti, antelope, and turkey (plus whatever else ya'll get to hunt and stock in your territory). Prep them blades, clean and sleep with them guns, shake them cartridges to loosen up and distribute the powder, and keep field stones handy for quick edges for the cold, morning, field dressing...And thanks for the question!
Question:	How well does this work on mower blades
Answer:	Allene is correct re coarse, fine and extra fine. However, grit sizes can be confusing because of the different grading systems of the particles. Abrasives with the same grit number can actually have different particle sizes. It all depends upon the grading system. For example a 2,000 grit water stone would not have the same particle size as a 2000 grit wet dry paper. There is even a difference among the paper abrasives. The Europeans use the FEPA system. Their abrasive sizes are preceded by a P (e.g. P220). Americans use the CAMI system. CAMI just has the number (e.g. 220). Again identical numbers might have different size particles when measured in microns. Therefore, I always try to get a reading on the particle size in microns. A micron is 1/1,000th of a mm. DMT also makes Extra Extra Coarse which is a 120 mesh (thats 120 little openings per sq. in.) and particle size of 120 microns. Extra Coarse is 220 mesh and a particle size of 60 microns. The coarse grit is 45 microns. Fine is 25 microns. Extra Fine is 9 microns. There is also an Extra Extra Fine which is 8000 mesh that is a 3 micron particle size. > 50 microns is considered grinding material. 15 - 50 microns is honing material and less than 15 microns is considered polishing material. I hope this helps.

• 🔪 HIGH-QUALITY ELECTOPLATING DIAMOND: The coarse diamond plate is coated with high quality 400# diamond for quickly touch up the blade.
• 🔪 SUPER HARD & FLAT CERAMIC PLATE: Our extra fine ceramic plate provides a fine stage for polishing the blades.
• 🔪 PORTABLE: Size 3" x 1" x 1/4". Weight 54G. Easy to store in any place within reach. Can be an EDC sharpener carries everyday everywhere.
• 🔪 EASY TO USE AND MAINTAINCE: Simply use it dry or with water or sharpening oil. Either way is fine for sharpening. Please clean and dry the whetstone after sharpening to prevent getting rust.
• 🔪 GOOD CHIOCE：We offer 60-DAYS hassle-free 100% REFUND GUARANTEE and Lifetime diamond wear out WARRANTY.

User questions & answers

Question:	Do I use this like a whetstone running my blade up and down it or like a honing rod; moving the blade across the middle
Answer:	There are several ways to use it. Personally, I use two main ways. The white ceramic side just to touch up. I use a sharpie to mark the edge, then I keep the stone at the exact edge angle and slowly run the. Stone up and down sideways. Making sure i remove the sharpie on the edge angle. But not just one the edge. Nor behind the edge without touching the edge. Get the whole edge angle. Second way I use it is first with the diamond side to take out nicks, or Chips I’ve accidentally made on the edge. Then I use the white ceramic side to refine the edge. And I use a sharpie with this technique too. I love these stones. They are absoutley fantastic.
Question:	Which side do you use first
Answer:	The metal, diamond side is the courser side and should be used first. I bought this for sharpening hooks on trout flies. For that application, the fine, ceramic side is all that is needed unless I'm sharpening heavy, saltwater hooks.
Question:	Would this work to sharpen a v-style blade mandoline
Answer:	If you're extra careful not to hit the middle of the blade, it can do it. The ceramic is smooth and the diamond side is coarse. Just be careful as many of those blades are induction hardened and not meant to be sharpened/honed. Try on a small area at the top of the V with some fine (1200-1500) sandpaper first.
Question:	How many come with this, one or four
Answer:	Only one (1).

Product features

DMD Mini Double Side Whetstone

• SIZE: 3*1*1/4"
• GRIT: DIAMOND 400#/ CERAMIC 1000#
• USAGE: Simply use it dry or with water or sharpening oil. Either way is fine for sharpening. Please clean and dry the whetstone after sharpening to prevent getting rust.