14 best beer kettles

Product description

Sizes Includes: 40 Quart Brew Kettle. Size: 14" Width x 15.5" Height (Measurements for pot only) Includes Ball Valve and Thermometer. Center of bottom hole is 1.5" from bottom. Center of top hole is 5.5" from bottom.

• Brew Kettle is made from Commercial Quality Stainless Steel, Fully Polished.
• All Accessories included in this set are made from high quality 304 Stainless Steel.
• Lid is hangable on the side of kettle.
• Full weld less construction, so you can remove and clean as needed.
• Kettle (pre drilled) will come unassembled for safe shipping. Assembly takes less than 10 mins, only tool required is a wrench or strong hands :).

User questions & answers

Question:	Will the concord 13.25 mash tun flase bottom fit is this kettle
Answer:	30 QT/ 7.5 Gal: 12 LB 40 QT/ 10 Gal: 14 LB 60 QT/ 15 Gal: 18 LB 80 QT/ 20 Gal: 22 LB 100 QT/ 25 Gal: 25 LB 120 QT/ 30 Gal: 30 LB 160 QT/ 40 Gal: 36 LB 180 QT// 45 Gal: 40 LB All weight is approximates
Question:	how heavy is
Answer:	no
Question:	Is this pot tri-ply on the bottom
Answer:	I believe so. It is of good quality. I have used it several times and as of now is my back up kettle (or secondary kettle on big brew days). I invested in Clawhammer Supply's 1650v System and it is amazing to say the very least. I am on electric thus the thermometer is of high importance since it's a little harder to control a consistent temp. I have roughly about 2 to 3 gallon burn off so if you're using electric, make sure you account for the burn off. You could also get an insulation jacket for the pot (I got one off the Clawhammer Supply site) which should improve the efficiency of keeping the kettle at a more consistent temperature. Overall, I highly recommend this piece of equipment but if you think you are going to keep upgrading your system (like I did) then I would save the money and look into something like Clawhammer Supply's BIAB or Grainfather or Robobrew.
Question:	Are the pots themselves made from 304 stainless steel? it says the accessories are 304 ss, but it doesn't say the pot is
Answer:	Unfortunately item is not induction compatible

Product features

Also check out our 16" Deluxe Banjo Burner (sold separately)

ASIN: B0771WRDGT

Burner is made from Heavy Duty Cast Iron with Weather Proof coating, Will last a Lifetime. Size: 16.5"x16.5"x12".

Burner can burn up to 200,000 BTU. High pressure CSA Certified 20 PSI regulator, hose, and connector included.

Stand has detachable legs for easy storage.

Capable of supporting up to 400 LB or 200 QT pot filled with liquid.

Connect hoses with our 1/2" barbed hose fitting (sold seperately)

• 1/2" Barb to 1/2" NPT fitting; Great for attaching 1/2" inner diameter hose
• 1/2" NPT Male fitting; 304 Grade Stainless Steel. High Grade
• You get 2 units per pack

ASIN: B075VF861W

Step up your game with our quick disconnect fittings (sold separately)

CONCORD 304 Stainless Steel Quick Disconnect Barb Hose with MPT Set. Home Brewing Mash Tun. (Barb Female/MPT Male)

Quick Disconnect allows easy disconnecting and sanitizing with just a push of a lever.

High Temp silicon gasket in each QD fitting for a water tight seal

ASIN: B079J5X3XD

Reach every last drop with our pick up tube fitting (sold separately)

CONCORD 304 Stainless Steel Beer Brewing Dip Tube Pick Up

3/8" Opening to 1/2" NPT Male Fitting

3" Length and Dips down approximately 1.5"

Add this dip tube to your brew kettle to achieve maximum efficiency

ASIN: B077VXC1ST

Product description

HIGH QUALITY STAINLESS STEEL- Very easy to clean, Long lasting, Safe and durable, Good heat conduction, Sleek look

• HIGH QUALITY STAINLESS STEEL- Very easy to clean, Long lasting, Safe and durable, Good heat conduction, Sleek look
• TRI-PLY - Extremely strong, Fast and even heat distribution, dependable and well-constructed Will last for a very long time
• Scale Markings - Keep track of your measurements and brewing process with the scale markings that are read inside the Kettle Pot
• Welded Ergonomic Handles - Gas One's Erganomic Handles ensures a sturdy and safe brewing experience when dealing with high heat
• Contents Include: Stockpot, Lid, S/S Thermometer, Spigot, Mini Wrench, O-Ring, and Sealing Tape

User questions & answers

Question:	Does it come with the False Bottom
Answer:	Hello, You can find a false bottom for our pots here; https://www.amazon.com/GasOne-30540-Stainless-Brewing-Supplies/dp/B07DKYK3K4/ref=sr_1_5?ie=UTF8&qid=1540401091&sr=8-5&keywords=brewing+false+bottom&dpID=41obrchjh9L&preST=_SY300_QL70_&dpSrc=srch also, if you are looking for a Bazooka Screen or Mesh tube You can see it link below; https://www.amazon.com/GasOne-Bazooka-Screen-Homebrew-Beer/dp/B07DKNRX2M/ref=sr_1_17?ie=UTF8&qid=1540401199&sr=8-17&keywords=brewing+mesh+tube Please feel free to send us a message if you have any questions! Thank you -GasOne
Question:	has anyone seem any evidence of delamination of the triply bottom after reasonable use
Answer:	I have now used mine for a year. Approximately 50 brews on a Turkey burner type heat source. The bottom is good as new. I've been very impressed with this kettle.
Question:	Can the stainless steel thermometer be added where the bolt is
Answer:	Yes, the bolt is just a plug. You just need to add a weldless thermometer.
Question:	I noticed there was a warning about Potential cause of cancer. What material in particular forced the need for a label
Answer:	Brass, as in the brass body if the ball valve, usually has small amounts of lead added to improve the "manufacturability" of the brass. Without lead, brass is a much more difficult material to work with. The original 1986 California Prop 65 law requires that ALL products containing ANY amount of lead be labeled. The Federal Safe Drinking Water Act of 1974 has had several amendments, including a tightened restriction on lead that is pending in 2020 (0.25 % I believe). But it's important to keep in mind that many reactive/toxic elements like water, oxygen, molybdenum, etc. in tiny amounts, are actually necessary in human diets. Lead is not presently known to be necessary, and is currently assumed to NOT be needed. However, that could change as additional research is done. Finally, in spite of the dangers that are omnipresent on our planet, you CAN replace any brass components with their stainless steel counterparts. They cost more, but a 100% stainless steel system would lower lead exposure to minimum practical levels.

Product features

Brew Kettle Set

Constructed with heavy duty stainless steel and designed with a tri ply aluminum bottom, the BS Series Brew Kettle Sets are ideal for brewers of all experiences - from beginner brewers to seasoned pros all alike. Comes included is a ball valve & spigot as well as a heavy duty stainless steel thermometer.

Can Be Used with Commercial Induction Cooktops

A flat bottom designed with aluminum (tri ply bottom) that can be used with both stove tops as well as commercial sized induction cooktops.

Tri Ply Bottom

A layer of aluminum that's constructed within the bottom of the kettle to allow for better heat distribution and conduction.

Scale Markings

Specially engraved scale markings located on the interior portion of the kettle to provide accurate measurement of beer/liquid content.

Product description

From home-brewing to peanut-boiling, the Gas One Stainless Steel Kettle is the perfect fit for your needs. Durable, aesthetically appealing, and reliable, this pot will give you the tools you need to cook whatever your heart desires. With a satin finish, the Stainless Steel Kettle will both compliment your project area and do its job. Your 8-gallon Gas One Stainless Steel Kettle can handle anything you throw at it—whether it be turkey frying, crab-boiling, or simply just wanting to heat up a huge amount of water. This kettle is a great companion for your cooking!

• HIGH QUALITY STAINLESS STEEL- Very easy to clean, Long lasting, Safe and durable, Good heat conduction, Sleek look
• POLISHED FINISH STAINLESS STEEL- Classic, sleek look; Visually appealing and fitting of any setting, Does not show scuffing or marks, There is no staining and no rusting
• TRI-PLY - Extremely strong, Fast and even heat distribution, dependable and well-constructed Will last for a very long time
• COMES WITH LID - Makes the heat stay in pot, Ensures even levels of heat while cooking, Keeps moisture in pot, Fast cooking and boiling speed, Perfect for cooking Crawfish, Crabs, Home Brewing, Peanut Boiling, and all other cooking activities
• Includes - 1 x Stock Pot 1 x Lid x 1 Brew Thermometer x 1 False Bottom x 1 Bazooka Screen x 1 Set of Mini Wrench x 1 O rings x 1 Sealing Tape x 1 Spigot x 1 Ball Valve 1/2 FNPT

User questions & answers

Question:	We are having difficulty with set. It drips. We got no paperwork or instructions. Need help so can you show set up
Answer:	Forget the included silicone washers and go to your local hardware store and get some rubber ones. Wherever metal wil contact metal put in a washer.
Question:	Could someone give me the interior dimensions of this pot? Exterior dimensions are described but I need to know the interior. Thanks
Answer:	The interior dimensions are almost exactly the same minus the very small thickness of the pot wall.
Question:	I can’t use my spigot because of an oil smell. Any idea how to clean it? I’ve used dish detergent with a small brush and cleaned and rinsed many times
Answer:	Boil a gallon or so of water with dawn (cuts grease). Then flush water/soap through spigot to remove residual oils. Make sure you are not smelling the silicone gasket. That smell will not go away but is not hazardous.
Question:	Does this kettle have a flat bottom for stovetop or induction burner use? Also, does it work with induction
Answer:	It does have a flat bottom. I use it with a propane burner though. It’s probably a little large for stovetop use.

Product features

Brew Kettle Set

With all the various accessories that are included, it is no surprise that the BP series Brew Kettle Sets have become a favorite among beginner brewers and seasoned pros all alike. Constructed with thick stainless steel it has a built in tri-ply aluminum bottom which allows for efficient heat distribution and conduction. Comes included as a part of the BP series is Thermometer, Ball Valve + Spigot, False Bottom, and Bazooka screen.

Bazooka Screen

Designed with stainless steel, our bazooka screen serves a dual purpose. Can be used for the purposes of filtering your hops from the wort and can be used in a mash tun.

Tri Ply Bottom

A layer of aluminum that's constructed within the bottom of the kettle to allow for better heat distribution and conduction.

Scale Markings

Specially engraved scale markings located on the interior portion of the kettle to provide accurate measurement of beer/liquid content.

Product description

Size: 12.5" Wide x 17.5" Height. Weight: 14 LBS Brew Kettle Set Includes: Brew Kettle, Lid, False Bottom, Bazooka Screen, Thermometer, Ball Valve, Inner Connector, and all hardware

• Entire Brew Kettle is made with fully polished stainless steel
• Brew Kettle Set Includes: Brew Kettle, Lid, False Bottom, Bazooka Screen, Thermometer, Ball Valve, Inner Connector, and all hardware
• Dual Filtration maximizes efficiency and improves taste
• Stamped Volume markers ensures precision. Lid is hangable on the side handle for sanitation.
• Size: 12.5" Wide x 17.5" Height. Weight: 14 LBS

User questions & answers

Question:	Where is the clear rubber o ring supposed to go? also i read in the instructions that we are supposed to have two wrenches, but mine only has one
Answer:	Hi, This kettle is not induction compatible
Question:	Can this kettle be used with an induction burner
Answer:	It's got a false bottom and a bazooka screen. I can't think of a reason why you would need a grain hopper or basket or bag or anything else really.
Question:	Anyone use this with a grain hopper? What size would fit
Answer:	This is a brew KETTLE, if you are into brewing a bucket and carboy is not too much money to invest in
Question:	Can this be used as a fermenter
Answer:	It will fill all types of bottles

Product description

From home-brewing to peanut-boiling, the gas one stainless steel kettle is the perfect fit for your needs. Durable, aesthetically appealing, and reliable, this pot will give you the tools you need to cook whatever your heart desires. With a satin finish, the stainless steel kettle will both compliment your project area and do its job. Your 5-gallon ALPHA stainless steel kettle can handle anything you throw at it-whether it be turkey frying, crab-boiling, or simply just wanting to heat up a huge amount of water. This kettle is a great companion for your cooking.

• High quality stainless steel- very easy to clean, long lasting, safe and durable, good heat conduction, sleek look
• 1.0mm thickness- heavy- duty and thicker than competitors, commercial grade material, will last for an extremely long time, sturdy and durable
• Satin finish stainless steel- Classic, sleek look; visually appealing and fitting of any setting, does not show scuffing or marks, there is no staining and no rusting
• Heavy-duty- extremely strong, dependable and well-constructed, will last for a very long time
• Comes with lid - makes the heat stay in pot, ensures even levels of heat while cooking, keeps moisture in pot, fast cooking and boiling speed, for cooking crawfish, crabs, home brewing, turkey fry

User questions & answers

Question:	What is the diameter of the base of the pot
Answer:	It's 12 1/4" tall 12 7/8" wide on top 11"on the bottom an 35"round
Question:	is this national food safety certified
Answer:	I’m sure it meets the standards but I’m not seeing anywhere that states it’s certified.
Question:	just got this beast, looks fantastic ... however the bottom is slightly bowed, not flat. Is that normal
Answer:	Mine is bowed outward on the bottom. Wish I would have seen this in one of the reviews. It's a pain on a glass top stove.
Question:	Can this be used with induction cooktop
Answer:	Be careful. Mine does not work with an induction cooktop since the pot is made from non-ferro stainless steel. I am convinced its aluminum.

Product description

30 Quart Stock Pot. Size: Pot 13" Wide x 14" Height.

• Stock pot is made from Commercial Quality Stainless Steel, Fully Polished.
• Commercial Grade 1.0mm thick walls
• Riveted handles for sturdiness.
• This Stock pot is great for brewing beer
• 30 Quart Stock Pot. Size: Pot 13" Wide x 14" Height.

User questions & answers

Question:	Can I use this pot for mixing lye for cold press soapmaking
Answer:	Yes. Lye and water can be mixed in stainless steel. Additionally lye water and oils (as used in cold process soap making) can be mixed in stainless steel. A large portion of serious soapers do exactly that. If you are questioning the quality of the material that is another matter...
Question:	Do they come Manuel plug free and basket
Answer:	No
Question:	Dimensions for 30qt size
Answer:	Inside dimensions are 13 3/8 deep and 13 3/4 across. The handles and lid add 2 1/2 inches each. With the lid,it weighs about 10 1/2 lbs.
Question:	Can I use this pot for mixing lye for cold press soapmaking
Answer:	Yes. It is very heavy, though. And, tall.

Product description

Join the national rage of Home Brewing using affordable Bayou Brew Equipment. Bayou Classic 40 Quart Stainless Economy Brew Kettle is perfect for "Brew in a Bag", or malt extract home brewing. Also functions as a standard stockpot for most outdoor cooking needs. Stainless construction enables easier sterilization prior to brewing. It features side calibrations stamped to be read from inside the pot; gallons and quarts.

• 40 Quart/10 Gallon Max Capacity Brew Kettle
• Use for Malt Extract Home Brewing or "Brew in a Bag"
• Stainless construction enables easier sterilization prior to brewing
• Multi-purpose: Use as a standard stockpot for most outdoor cooking needs
• Stainless construction provides for easy clean-up

User questions & answers

Question:	What is the height this without the top. If the dimensions are 17.88 x 15.5 x 13.88 in. I assume this it 17.9" tall
Answer:	12 pound no problem.
Question:	will it fit a turkey
Answer:	For boiling the wort, yes. I mash in an Igloo cooler with a manifold at the bottom. (There are good YouTube videos on how to home brew using this method.) The marks on the inside of this kettle are very good for determining how much wort you are boiling. Hope this helps!
Question:	Has anybody used this for all grain brewing
Answer:	We use ours on the stove mostly, but we use it as an acid bath for dying. We have had no problems with any of the bayou classic pots we have purchased (3). Hope that helps
Question:	How well does this pot hold up for long term use? My current brew pot has many dents on the bottom from using on a propane burner
Answer:	I ordered this but after 2 or 3 weeks i never received it, i just got a refund.

Product features

Bayou Classic Steel 1440 Bayou Stainless Brew Kettle, 40 Quart

The Bayou Classic 40-Qt Stainless Brew Kettle is perfect for “Brew in a Bag” or Malt Extract Home Brewing. Featuring internal side calibrations, gallons and quarts, viewed from inside the pot. Stainless construction enables easier sterilization prior to brewing. Also functions as a standard stockpot for most outdoor cooking needs.

The Bayou Classic 40-Qt Stainless Brew Kettle can also be used for any other type of boils that you would like to prepare.

So join the national rage for Home Brewing and Outdoor Cooking using affordable Bayou Brew Equipment.

Product description

For home brewing masters and hobby winemakers: 6.6 Gallon fermentation kettle made ofstainless steel for fermenting beer mash and fruit juice.

 

Top Features:

• Hygienic and taste-neutral: fermenting kettle made of 304 stainless steel

• Food-safe: no reaction with the brewing, no taste changes

• Pressure equalization: includes plastic fermentation tubes with acrylic plugs

• Safe hold: lid with fixed spring clips

• Wine and beer: universal fermentation tank for fermentation and storage of fruit

juices and beer mash

Features:

• Volume: 6.6 gal

• Embossed scale in litres and gallons

• Drain tap for easy transfer / filling

• Stainless steel lid with overhanging rim and rubber seal for airtight fit

• Acrylic stopper for airtight fit of the fermentation tube

• Handles for moving the boiler

• Fermenting kettle for undisturbed fermentation of beer and wine

• deep-drawn kettle (one part, no joint between bottom and wall

Included:

• 1 x kettle

• 1 x lid

• 1 x fermentation tube with stopper

• Delivery without user manual

Dimensions:

• Dimensions: about 16.5 x 21.6 x 13.4" (WxHxD)

• Inner dimensions boiler: about 11.6 x 17.3 (ØxH)

• Weight: about 8.1 lbs

• VERSATILE: The universal beverage barrel for fermentation or storage: light or dark, dry or sweet, wine or beer, with the Klarstein Maischfest mash kettle you can turn fresh beech wort into delicious beer and turn fruit juice into the best wine!
• SECURE: Up to 6.6 Gallon of brewing contents can ripen peacefully in the large stainless steel kettle. Fixed clamps hold the lid and airtight sealing ring securely on the fermentation vessel, and prevent the disturbance of the fermentation process.
• EASY TO TAP: The supplied plastic fermentation tube ensures the necessary pressure equalization. Thanks to acrylic plugs, it fits airtight in the intended lid opening. When ready, the finished beer can be tapped directly via the built-in drain tap.
• QUALITY: Beer or wine could also mature in any other container, but the Klarstein fermentation kettle is made of taste-neutral 304 stainless steel: This means that the fermentation process is always hygienic, and after use it is very easy to clean.
• MAKE YOUR OWN BEVERAGE CREATIONS: Up to 25 litres of fresh beer from your own home brewery or fruit wine from your own garden? Nothing could be easier: with the Klarstein Maischfest fermentation kettle, your home brewery is complete. Bottoms up!

User questions & answers

Question:	Can you pressure transfer from this fermentor to a keg
Answer:	Yes. But even with only 1-2 psi, you have to clamp on the lid and keep the stopper from popping. Better off just doing a gravity with a CO2 purged keg back to the FV.
Question:	Is there a gasket between the lid and the top of the vessel walls
Answer:	Yes, there is a silicone gasket in a groove in the lid that seals down onto the sidewalls when the lid clamps are applied.
Question:	what type of thread on the discharge side of the ball valve. sae npt
Answer:	The ball valve has 1/2” NPS threads. These are parallel and not tapered. I added a quick disconnect to mine by using a few extra wraps of Teflon tape.
Question:	Is the 25 liter fermenting kettle also electric
Answer:	It does not heat. It is just a fermenting container like a bucket or a carboy.

Product description

The Brewer’s Edge Mash & Boil makes All Grain Brewing easy and affordable. No need for an outdoor burner, complicated brewing stand, or a 220 volt special circuit - it plugs into any 110 volt GFI household outlet. The Mash and Boil’s exclusive double wall stainless construction conserves heat to achieve a rolling boil with only 110 volts and 1600 watts, and its precise thermostat and internal sparging basket lets you mash and boil in the same vessel. The Mash & Boil features an adjustable thermostat (switchable from Fahrenheit to Centigrade) with an adjustable run time preset at 3½ hours for safety. It also features a delayed start timer, so you can program the Mash and Boil to turn on up to 24 hours after setting. For example, load it with strike water, and have it set to be hot when you come home from work to save time. A 5' power cord is included.

• Mash up to 16lb of Malt
• Maximum Capacity of 7.5 Gallons
• Double Wall, Stainless Steel Construction
• External Stainless Steel 1/2in Valve
• Plugs Into Standard Wall Outlet

User questions & answers

Question:	I just bought this item and when i was use the message e4 error dry appeared. what can i do to know this error code
Answer:	Four gallons of strike water takes about 20 minutes (depending on ambient temp) to reach 160 degrees. Once grains are cooked and sparging done, it takes about 15-20 minutes to reach boil.
Question:	How long does it take to heat 6 gal of water
Answer:	yes you can preset mash temp to your desired temp but there is a 6 degree swing for the thermostat. so it will drop to 143 then turn on and heat up to 155 then turn off. I'm very happy with mine it hold mash temp well because of the double wall design and if you insulated it you should be able to hold the temp you desire and not have to worry about the 6 degree swing on the termostat
Question:	Does it electeonically hold mash temps? Like a set temp of say
Answer:	The inside diameter is 11-1/2 inches.
Question:	what are the inside pot dimensions? I'm hoping my existing wort chiller fits in there
Answer:	Around 230 which is for the boil but even that's too high for boil

Product description

For home brewers: more precise, 7.9 gal. mash tun made of 304 stainless steel with

easy operation via LCD display and touch-screen.

1600 W strong mash and beer kettle with timer and thermostat for precisely accurate

heating and warming..

Top Features:

• Complete set for simple mashing at home: kettle, sieve insert, grain container,

circulation pump .

• 1600 W powerful heating element

• Stainless steel boiler for even temperature distribution

• Easy operation with clear LCD display and touch control panel

• Easy emptying by a secured drain tap

Features:

• Manual or automatic control of the mashing process

• Up to six programmable mashing steps

• Temperature, time and power adjustable

• Display of the current mashing step

• Drain tap with fine mesh filter

• Cover made of tempered glass

• Removable grain container for easy removal of the grains

• Circulation pump for easy stirring

• Includes sieve insert for filtering the mash

• Off switch on front of unit

• All metal parts made of 304 stainless steel

• Power supply: 110-120V ~ / 50-60Hz

Included:

• 1 x kettle

• 1 x sieve insert

• 1 x circulating pump

• 1 x grain container

• 1 x glass lid

• English language manual (other languages:Spanish)

Dimensions:

• Measurements: about 15 x 27.5 inches (ØxH)

• Weight: about 26.4 lbs

• VERSATILE: A beautiful mash tun for any brewing: light or dark, dry or sweet, wine or beer, with the Klarstein Mundschenk mash kettle you can turn create wonderful worts or must.
• SECURE: Up to 7.9 gal of brewing contents can mashed in the large stainless steel kettle.
• INTUITIVE OPERATION: A clearly arranged touch panel with LCD display makes it possible to set the temperature, cooking time and power on the device manually. The device's LCD display always shows the exact current temperature inside the boiler.
• QUALITY: Taste-neutral 304 stainless steel tank elements mean that the brewing process is always hygienic and after use the tank is easy to clean.
• EXPERIMENT: Make up to 30 liters of fresh beer or fruit wine from your home. Simplicity and thoughtful design means your home brewery is complete. Bottoms up!

User questions & answers

Question:	Is it double-walled stainless steel
Answer:	No. It is single walled. If the reason you're asking about it being double walled is for temp control purposes that is not a problem. I upgraded to this unit from a Mash and Boil without the pump. The M&B is double walled (which you would think would be a plus) but I was fairly disappointed with the temp swings during the mash process. The heating element wouldn't kick on until the temps were 5+ degrees below the set temperature and then it would always overshoot the temperature by as much as 10 degree too high. The mash would have 10-20 degree temperature swings. This unit is much more percise and the recirculation also plays a big part of that. The temperature always seems to stay within a couple degrees over or under the set temperature. I would not be concerned with it only being single walled.
Question:	What temp does this heat the mash to? (What is the max temp
Answer:	It will boil your wort, so 212 degrees. You can set it lower for whatever temp you want your mash to be.
Question:	Which wort chiller would you recommend for this brewing system? What is the internal diammeter for the kettle
Answer:	Even though it's not listed in the discription or pictured, it actually came with a stainless wort chiller. Just the actual chiller itself. No hose or fittings to hook it up. The chiller is also fairly short. It appears to be 25 feet of 3/8 inch stainless pipe. It would not be very efficient for chilling a full 5-6 gallon boil. The inside dimensions of the kettle are 16 1/2 inches deep and 13 3/4 inches internal diameter if you want to use a more robust chiller. I have been using the recirculation pump to push the wort through my plate chiller post whirlpool with great results.
Question:	Can this be used as a temperature controlled fermenter
Answer:	No. The title on Amazon's site suggests this can be used as a fermenter but this is strictly an all-in-one brewing system. It's for the mash and boil only. Attempting to use it as a fermenter would be extremely risky. There is no seal on the lid nor are there any sort of clamps to hold the lid on. The lid just rests metal on metal with nothing sealing it. Fermenting in it would surely expose your beer to oxygen and possibly contaminants.

Product description

Size: 1/2" Opening to 1/2" NPT. 3" Length, Dips approximately 1.5"

• 3" Extra Wide Nose 304 Stainless Steel Dip Tube
• 1/2" Opening to 1/2" NPT Male Fitting
• Fits into any 1/2" openings
• Dips down approximately 1.5"
• Add this dip tube to your brew kettle to achieve maximum efficiency

User questions & answers

Question:	Would this work In a 16 gallon bayou classic kettle
Answer:	It all depends on where you punch the hole in the kettle. It doesnt dip particularly low.
Question:	Is this a compression fitting? Can I screw it in to my ball valve and adjust the rotation angle of the dip tube
Answer:	No, this fitting is not adjustable once screwed in place
Question:	when installing, is it normal to only screw on about a turn and a half to my coupler? almost seems like the threads are not 1/2"NPT like the coupler
Answer:	I agree. It sounds like you are cross threaded or it's the wrong thread size. Test it with a known example and also from the other side of the bulkhead.
Question:	What is the distance from the bottom of the thread to the bottom of the tube
Answer:	Approximately 0.75 inches

Product description

Anvil brewing equipment 10 gal kettles are as durable as they get. This rugged kettle is constructed from high quality materials and designed for a lifetime of demanding use. Includes Clad bottom, etched level graduations, thermometer, Valve, and dip tube. Imported.

• Heavy 18 gauge 304 stainless steel with reinforced lip for durability and easy cleaning
• Induction capable tri-ply clad bottom
• Internal etched level graduations in gal and liters for accurate measurements
• A dual scale f/c thermometer – included standard
• Solid cast stainless steel handles for comfort and durability – no rivets to leak or harbor contaminations

User questions & answers

Question:	This is about 37L, right
Answer:	The Anvil web page just says "imported". I checked my kettle and there are no marking on it to indicate where it was manufactured.
Question:	Where is this kettle made
Answer:	It doesn’t come with one. One may be available as an add-on. This kettle changed my brewing life, btw!
Question:	Is there a false bottom available (better yet, does it come with one
Answer:	Anvil Kettles are made of 18 gauge 304 stainless steel.
Question:	What is it made of
Answer:	Any screen with a 1/2" male thread. Cheers!

Product features

Anvil Brew Kettle, 10 gal

Anvil Brewing Equipment’s 10 gal kettles are as durable as they get. This rugged kettle is constructed from high quality materials and designed for a lifetime of demanding use. Includes clad bottom, etched level graduations, thermometer, valve, and dip tube. Imported.

Product description

This small 5 gallon kettle is a great kettle for the beginning brewer to learn on, as it holds a manageable sized batch and it's available for a very affordable price. It is also perfect for the craft brewer who enjoys making several small batches instead of one large batch.



This brew kettle is high quality stainless steel. It features 0.5-mm thick sides and bottom, and riveted stainless steel handles. This 5 gallon kettle can safely hold up to 3 gallons of wort while boiling, making it the perfect size for extract brewing right in your own home!

• This small 5 gallon kettle is a great kettle for the beginning brewer to learn on, as it holds a manageable sized batch and it's available for a very affordable price
• It is also perfect for the craft brewer who enjoys making several small batches instead of one large batch
• This brew kettle is high quality stainless steel
• It features 0
• 5-mm thick sides and bottom, and riveted stainless steel handles

User questions & answers

Question:	Does it work on an induction cooktop
Answer:	Yes. I kept dye pot hot on my induction burner
Question:	what gauge stainless is this made of? what is the weight of the pot? is there an aluminum core
Answer:	Seems ok don't think has a core not real heavy though . But ok for price
Question:	What are the diameter and height
Answer:	It's 9 7/8" tall and 12 7/16" in diameter.

Product description

Anvil brewing equipment 7.5 gal kettles are as durable as they get. This rugged kettle is constructed from high quality materials and designed for a lifetime of demanding use. Includes Clad bottom, etched level graduations, thermometer, Valve, and dip tube. Imported.

• Heavy 18 gauge 304 stainless steel with reinforced lip for durability and easy cleaning
• Induction capable tri-ply clad bottom
• Internal etched level graduations in gal and liters for accurate measurements
• A dual scale f/c thermometer – included standard
• Solid cast stainless steel handles for comfort and durability – no rivets to leak or harbor contaminations

User questions & answers

Question:	May this kettle be used for Kombucha as well
Answer:	I am using it for Kombucha. It has been great to monitor the temperature. Be sure to clean the spigot well before adding your starter.
Question:	What is the diameter on the ball valve? will a 1/2" mpt fit the valve
Answer:	Yes. The valve is threaded for 1/2" pipe fittings.

Product features

Anvil Brew Kettle, 7.5 gal

Anvil Brewing Equipment’s 7.5 gal kettles are as durable as they get. This rugged kettle is constructed from high quality materials and designed for a lifetime of

demanding use. Includes clad bottom, etched level graduations, thermometer, valve, and dip tube. Imported.