12 best tools supply bed rail

Product description

Note: Bed Assist Handle/Rail does not require both box and mattress to work. However it will work only with mattresses greater than 5 inches in height. It will not work on low/platform beds with height clearance less than 14" from floor to frame.

• FALL PREVENTION & MOBILITY INDEPENDENCE - A safe and secure grip to help you get in and out of bed safely. Allow seniors, disabled individuals, pregnant women or anyone with physical limitations or injuries to get out of bed unassisted
• SAFE & DURABLE - Heavy-duty powder-coated steel provides a strong, Can hold up to 300lbs
• SLIP-RESISTANT FOAM PADS - Slip resistant handle, foam padding, horizontal stabilizer bars and floor standing legs work to provide increased stability for user
• MODERN DESIGN UNIVERSAL BED RAIL - Adjustable bed rail height and width allows product to fit onto any sized beds (twin, full, double, queen, king) and on either side of the bed (right or left). Modern bed rail design will blend in nicely in any bedroom. Note: Bed Assist Handle/Rail works only with mattresses > 5 inches in height. It will not work on low bed/platform bed with height clearance less than 14" from floor to frame.
• TOOL-FREE ASSEMBLY & EASY TO CLEAN - Assembles in minutes without tools. To use: simply slide under your mattress. To clean: Wipe and let dry

User questions & answers

Question:	It says the bed assit hand/rail works if the measurement from floor to bottom of mattress is 17.5". ours measures 17"? will that work
Answer:	Should work fine. On lowest setting, the bottom of the bar that rests on the boxspring measures 16". My parents' boxspring is only 14.5", so the bar does not quite rest on it, but it's still solid & works well.
Question:	Cakn you pull on is in order to sit ip in bed
Answer:	Yes you can. It’s an easy way to sit up in the morning
Question:	Can you use two of these for both sides of a queen bed
Answer:	Yes. I actually use two of them on one side of a king bed so my husband can use both to get in and out of bed. I think they are wonderful.
Question:	Is the leg adjustable
Answer:	Yes. It came alreadt at the right leg height for my mattress/bed setup, but it has spring-loaded locking buttons for other situations. I love this thing. My physical therapist recommended it, with much appreciation to her.

Product features

If getting in and out of bed presents a challenge, the solution is simple.

The Medical Home Bed Assist Handle/Rail provides a safe and secure grip to help seniors, disabled, or anyone with physical limitations or injuries to get in and out of bed unassisted. Equipped with a slip-resistant handle, foam padding, horizontal stabilizer bars and floor standing legs, this unit provides the ultimate support and stability for its users.

This modern handrail design will blend in nicely in any of your bedroom. It promotes mobility independence and the prevention of bedside falls; a common problem among seniors and patients.

Independence & Fall Prevention

Offers safe and secure grip to help you get in and out of bed safely.

Safe & Durable

Heavy-duty powder-coated steel provides a strong, sturdy frame with a maximum weight capacity of 250lbs.

Slip-resistant Foam Pads

Slip-resistant handle with foam padding and horizontal stabilizer bars provide stability for users.

Product description

The multipurpose EZ Adjust Bed Rail from Stander gives you independence, balance, and support while functioning as both a bedside support handle and bed rail. The EZ Adjust Bed Rail is perfect for those that lack mobility, suffer from loss of balance, or simply fall out of bed during the night. As the only bedrail in the world that adjusts in length after installation, keep you or your loved one safe from rolling out of bed during the night. Easily get in and out of bed by using the rail as a bedside grab bar. When not in use, fold the bed rail down and out of the way. The included organizer pouch is perfect for keeping your remote, book, or medications close by. The EZ Adjust Bed Rail is not intended for use on adjustable beds.

• PREVENT FALLS: The EZ Adjust Bed Rail adjusts in length from 26 to 34 to 42 inches, helping to prevent nighttime falls; the EZ Bed Rail provides independence, balance, and support while sleeping or transitioning out of bed; supports up to 300 pounds
• FOLDS OUT OF THE WAY: Fold the support rail down and out of the way when not in use or while making your bed; simply release the 2 round knobs from their locked position to collapse the rail; use with most 12 to 18 inch mattresses
• VERSATILE: The EZ Adjust Bed Rail is compatible with most traditional and platform beds sized from twin to California king, not intended for use on adjustable beds; the rail can be installed on either side of your bed with the included dual safety strap
• MODERN DESIGN: The bed handle and organizer pouch will blend with the style and comfortable feel of your home, making it the perfect bedroom addition; keep your remote, glasses, book, or medications close by in the machine washable 3-pocket pouch
• HIGH QUALITY AND EASY TO ASSEMBLE: Easily assemble and securely install the rail to your bed frame; each bed rail includes all of the needed equipment for assembly, no additional tools required; please reference our assembly instruction video

User questions & answers

Question:	Does it install well with a queen size bed
Answer:	You will have no troubles installing the EZ Adjust Bed Rail on your queen size bed. There is a quick assembly and installation video on the product page. Click on one of the images and then a media box will appear. One of those videos is the Stander Assembly video. If you still have questions after that feel free to call us at 1-800-506-9901!
Question:	Does the strap have to go around a bed frame or can you secure it around a mattress
Answer:	Bed frame would be the most secure, however, around the box spring under your mattress would work. I don't have a box spring under my mattress so I secured the strap around the opposite side of my wooden frame.
Question:	Will this work with customatic "privia" adjustable bed frame with no box spring, mattress only
Answer:	I looked up what a privia bed was. Not sure this would work. It has two pipe arm to slide under the mattress and straps that go around the box springs to keep it secure. It is a good product in the correct application. I feel you should keep looking.
Question:	We have a Craftmatic adjustable bed. Does the EZ Adjust Bed Rail work on this type of bed
Answer:	Should be able to, but you must install differently than the enclosed instructions. The rail is secured to the bed by straps that are supposed to loop around the bed's foundation. With the automatic bed, you must loop and tie the straps around the moveable base directly under the mattress NOT the foundation. This keeps the bed rail secured to the bed without interfering with operation and movement of the mattress and base. We are using it on a Tempurpedic adjustable twin bed and works great for what we need. The mattress base is metal on this model, so straps are very secure, just had to fiddle with excess length for a while. No problems with it all.

• ** PATENT PENDING bar that slides to adjust to most bed sizes for a Perfect Fit. Comes with Free Safety Strap.
• ** THE MOST STABLE & STURDY Bed Railing Available - That helps adults, elderly, seniors & handicap people get in and out of bed. Helping you transfer safely and get your mobility back.
• ** LIMITED LIFETIME WARRANTY - Made of Premium High Quality Steel & Materials ensuring stability and preventing falls when using handle and amazing grip. The absolute must have in home medical supplies, assistive devices and disability aids category.
• ** FITS Most Bed Sizes, ADJUSTABLE & NO TOOL ASSEMBLY- California King, King, Queen, Full, Twin & Medical
• *** Not Made for Height Adjustable Beds. Minimum bed height 11": The bottom of the mattress must be at least 11 in. from the floor & Maximum bed height 17.5": The bottom of the mattress must be no more than 17.5 in. from the floor

User questions & answers

Question:	The top of my box spring is 13" from the floor; the mattress is then another 9 1/2" thick. Will this product fit
Answer:	They are slightly over a 1/2 inch
Question:	Can this bed rail be used on an adjustable bed
Answer:	From tips of bristles to opposite side of bristles is 2 1\2 inches.
Question:	Will this works on a sofa with 3 cushions of 32" deep and the distance from floor to the sofa frame is 12". Thank you in advance
Answer:	The diameter of the medium brush is 1”.
Question:	I am not using bed frame- just 9" box springs with 14" mattress - will this work
Answer:	Thank you for your interest in our brushes. The base of the brush head is ceramic.
Question:	Will this come with 1 or 2 barrel heaters
Answer:	Molded, not tips, part of the molded bristle
Question:	Can this boil water inside of the barrel
Answer:	The actual brush part, not including the handle, is about 5" x 3.5". The handle is 5" long. I am petite also and have always had smaller brushes, so it took a little getting use to. I love this brush though. I am use to the size now and it does not bother me.
Question:	According to the picture, are 2 heaters needed for a metal drum? 1 won't work to get max temp
Answer:	no, there are nylon bristles mixed in with the boar bristles. (wish they made a pure boar paddle brush :-{ this one is ok even with the nylon bristles, but they are harder and less flexible if you have tangles, so that may be a consideration if you have fine/tangle-prone hair like mine...)
Question:	What is the Operating wattage do these run to keep water in a full 55 gal plastic drum from freezing at 20 degrees F with no insulation
Answer:	No, however, I do wash my on the paddle and let it air dry.
Question:	Do you have to fill up the 15 gallon tank? Or can you put the feed in my oil 55 drum
Answer:	It is 1*8.00*2.41 .
Question:	I paint cars in my shop and need a dry heat. is this a radiant heat or open flame heat
Answer:	I measured this brush and it's longer then 8 inches. Not sure what the product details are talking about. But I can't find this brush in stores. It's the only thing that will get through my spring curls.
Question:	will this burn all my vegetable oil from my restaurant
Answer:	Yes, this is a full sized brush.
Question:	Does it have to be light every time or just to start it
Answer:	It is 6 inches around the barrel, including the bristles.

Product features

Patent Pending Sliding height adjustable Bar makes for "Perfect fit”

Liberty Bed Assist Rail with a patent pending sliding bar for height adjustments delivers the perfect fit for every bed.

Just slide the middle bar along the main rods for a custom fit.

The most stable and sturdy handle available

Liberty Bed Assist Bar has a sliding middle bar that slides along the main element to ensure a perfect fit for any bed—this bar won’t just fit “close enough,” it is customizable to any bed.

Our engineers knew that by creating the perfect fit, physics and superior manufacturing would create incredible stability.

Top bar is removable for easy cleaning and making of bed

When it comes to daily tasks, we don't believe in making life harder.

So we spent the extra time to engineer a way for someone to clean and make their bed , without having to completely remove the bed assist rail.

Assemble in minutes with NO TOOLS

• Weight Capacity is 300 LBS
• FITS ALL BED SIZES - California King, King, Queen, Full, & Twin
• Minimum bed height: The bottom of the mattress must be at least 11 in. from the floor
• Maximum bed height: The bottom of the mattress must be no more than 17.5 in. from the floor

Don’t wait any longer, get the help you need to get in and out of bed. Simply click the buy button at the top of this page and know you will have a bed assist bar to meet your needs.

Product description

DMI Bed Assist Rail This bed rail features a padded handle that provides a safe and secure grip. Height of the bed rail can be adjusted from 30. 5 to 38 inches to meet your personal needs. It can support up to 250 pounds and offers tool free assembly NOTE: Requires the height from top of box spring to floor to be between 16. 5 to 20. 5 inches. Features Provides additional support when getting in and out of bed Padded handle gives you a secure grip Designed for use on any size two-piece bed (box spring and mattress) Lightweight, powder-coated steel construction Tool-free assembly! Adjustable height: 30. 5 to 38 inches Size: 32. 75 x 19. 75 x 30. 5 to 38 inches Product Weight: 8 pounds Weight capacity: 250 pounds 1-year limited Requires the height from top of box spring to floor to be between 16. 5 to 20. 5 inches

• PROVIDES A RELIABLE GRIP THAT ALLOWS YOU TO EASILY GET IN AND OUT OF BED: Rails allow easy mobility as well as fall prevention
• SAFE AND SECURE: Comfortable padded handle provides additional grip while the slip resistant tips provide added stability for bed safety
• ADJUSTABLE HEIGHT BED RAIL: adjusts from 30. 5 to 38 inches. Install requires the height from the top of the box spring to floor to be between 18”-22” (5 adjustment holes approx. 1” apart)
• EASY, TOOL-FREE ASSEMBLY: Three easy to assemble all steel sections simply slide together – no tools required. Designed for use on any size two-piece bed (box spring and mattress)
• SIZE: 32. 75 x 19. 75 x 30. 5 to 38 inches. Weight capacity: 250 pounds

User questions & answers

Question:	does it come assembled
Answer:	They need more velcro to hold too the bed rails. Patiens can rip them off now.
Question:	how does one get into bathtub from seated position
Answer:	Thank you for your inquiry. The pads are about 60" long.
Question:	What is the clearance measurement under bench? I have a tall tub and I want to be sure this is tall enough
Answer:	They velcro on, I just remove them each time and replace them when in position.
Question:	Can you make it left or right sided
Answer:	That depends on the type and length of rail that you have on the bed. The Bumper pads are long enough to work on a full or queen size bed.

Product features

RELIABLE MOTILITY

Provides a reliable grip that allows you to easily get in and out of bed, as well as fall prevention.

SAFE & SECURE

Comfortable padded handle provides additional grip while the slip resistant tips provide added stability for bed safety.

ADJUSTABLE HEIGHT

Adjusts from 30.5 to 38 inches. Install requires the height from the top of the box spring to floor to be between 18”-22” (5 adjustment holes approx. 1” apart).

EASY, TOOL-FREE ASSEMBLY

Three easy to assemble all steel sections simply slide together – no tools required. Designed for use on any size two-piece bed (box spring and mattress).

MEASUREMENTS

32.75” x 19.75” x 30.5” to 38 inches. Weight capacity: 250 pounds.

LIGHTWEIGHT

This bed assist rail only weighs 8 pounds! It's easy to take with you on the go and when visiting friends and family.

Product description

Safe and easy to install, this half rail by Drive Medical was designed specifically to comply as part of the FDA Hospital Bed System Dimensional and Assessment Guidance to Reduce Entrapment. Its width adjusts tool free in 2" increments from 36" to 42" and fits most beds with a steel frame. It is ideal for protection when bed is elevated but not for use with "Pan-Style" bed surfaces. These half rails are constructed of 1" steel and finished in an attractive brown vein. Chrome finish on second and fifth bar allows for scratch-proof movement of adjustment bracket.

• FALL PREVENTION: Helps prevent falls and assists in getting into/out of bed
• HEAVY DUTY FRAME: Bedside assist rail made from lightweight, durable steel with a handsome brown finish; Dimensions (L x W x H): 38 x 20 x 6 inches
• UNIVERSAL FIT: Designed to fit most steel bed frames (not for use with Pan Style bed surface)
• ADJUSTABLE WIDTH: Adjusts tool-free in 2-inch increments between 36- and 42-inches
• SAFETY FIRST: Compliant with the FDA Hospital Bed System Dimensional and Assessment Guidance to Reduce Entrapment

User questions & answers

Question:	Does this fit on a regular adjustable bed frame
Answer:	It is only going to work on hospital or home care style bed with a metal frame to attach to.
Question:	How wide is the clamp that fits to the frame
Answer:	The clamp is adjustable in width. Here is the instructions manual that shows how the clamp works. http://cdn.drivemedical.com/media/files/125/15208BV_hangtag.pdf
Question:	If no tool needed for installation, and rail rises with position of bed, how does it stay on? To what does it connect
Answer:	It connects to the frame of the bed via a pair of clamps that you adjust with a knob. They're a little awkward at first but they worked very well for us and were sturdy as long as they're clamped down nice and tight.
Question:	Is the $98.03 the price for a pair
Answer:	Hello, thank you for your interest in Drive Medical! This item is sold as a pair of rails.

Product description

Carex Bed Assist and Support Bar Bed Rail for Elderly Adult

The Carex Bed Rail for eldery, seniors, and toddlers is designed to help users get in and out of bed as well as, prevents you from falling out of bed. Safe and secure grip fromthe handles to the non-slip foot pegs, you can be sure the Carex bed side rails for seniors provides you with the ultimate support and safety and the best elderly assistance products on the market.

Features and Benefits:

• Slip resistant foam hand pads on the rail handle that adds more comfort, ease of use, and stability.
• Fully adjustable in height and depth to fit most beds. Maximum dimensions are 45" x 20" x 37" (L x W x H).
• Doubles as a fall prevention bed rail to prevent you or your kids from rolling out of bed. Place one on both sides of the bed for added safety.
• Strong and durable adjustable steel frame that can hold up to 300 pounds. Easily adjust the height of the bed rail with the simple snap buttons
• Get yourself out of bed without relying on someone else or trying to grab hold of your surrounding furniture. Our bed rail bar will keep you sturdy and confident to get out of bed quickly.
• Safe and built to last with heavy-duty and durable materials with sturdy legs to keep the rail in place
• Included safety strap to secure the bed rail to your bed frame. Prevent the bed rail from moving and falling when in use.

Elderly Bed Rails That Don't Require Tool Assembly

Will fit most standard sized beds! Twin, full, queen, king

With the included assembly instructions, you will have the bed rail ready to use within minutes. Once assembled, simply place the rail under your bed frame, secure with the strap, and adjust the height accordingly. Trust Carex, a leader in disabled products and home health care equipment for seniors, handicap, and those home bound.

Press "Add To Cart" to purchase

• ADULT BED RAIL– Safe and sturdy bed rails for elderly adults, seniors, toddlers, or handicap to get in and out of bed with ease. Simply place your hand on the padded hand assist bar and push yourself up to relieve tension off your back and legs
• PREVENTS FALLS – 2-in-1 bedrail for elderly that can prevent falls for people who may roll out of bed. The durable and securely built bed cane be sure to keep you safe and secure in bed. Great as bed assist bar for seniors at risk for falling
• EASILY ADJUSTABLE – Adjust the height and depth of the bed rail assist bar in seconds. Will fit most standard sized beds and can be installed on both the left or right sides of the bed. Get 2 bed rails to be extra safe and secure
• SAFE AND DURABLE – Built with a heavy-duty steel frame that can support weights up to 300 pounds. Sturdy non-slip foot pads to keep the bed assist rail secure. We include a safety strap that secures the bedside rail in place
• NO TOOL ASSEMBLY – A bed cane for seniors with snap buttons and secure twist knobs that allow you to assemble the bed rail in just minutes without tools. Trust Carex, a trusted leader in manufacturing bed rails for adults and bed bars for seniors

User questions & answers

Question:	how tall is the rail from the floor to the part that goes under the mattress
Answer:	Not sure but it is sturdy and very helpful
Question:	will it work with a bed base that is only 10" high
Answer:	Yes
Question:	work with tempurpedic
Answer:	There is a hook on each standing rail and you attach the 2 top side of the bag to. Then you use the 4 straps to hold entire bag in place by wrapping around the rails.
Question:	Do the foam hand rails contain any latex
Answer:	Firstly, good luck with the phase. The smallest size is 36" x 80", which is larger than a standard baby crib

Product features

Carex Bed Support Rail

The Carex Bed Rail is designed to provide a safe and secure grip and non-slip foot pegs. Bed rail is easily adjustable with simple snap buttons to fit most beds. Its strong and durable steel frame holds up to 300 lbs and its sturdy legs will keep the rail in place. For extra protection, a safety strap is included as well to secure the bed rail to your bed frame and prevent it from moving and falling when in use. Its ultimate support and safety features make it one of the best elderly assistance products on the market.

Independent living is easier when you have the right tools

Get yourself in and out of bed without having to rely on anyone else for assistance - or worse - grabbing hold of surrounding furniture, which could be dangerous. Our bed rail bar will keep you sturdy and confident to get out of bed quickly.

Bed rail can also be used to prevent you or your kids from rolling out of bed. Place one on both sides of the bed for added safety.

Get into and out of bed safely with the Carex bed support rail

Quick, easy adjustments with the push of a button

Adjustable height and width can be adapted to fit most beds

Product description

Bed Rails for Elderly Adults Seniors Assist Bar Bed Guard Railings Bedside Grab Bar Cane Assist Handle Half Bed Rail Hospital Safety Fold Down Rails



Material: iron, aluminum

Colour: wine red wood grain

Specification: 37 × 18 × 1.5 inches

Applies to: with mattress measuring between 2 to 12 inches thick

Recommendations: use with plywood for better stability



MODERN DESIGN 一 WINE RED WOOD GRAIN:

This railing looks like an exquisite mahogany furniture, very comfortable and natural to blend into your room, making it the perfect bedroom addition.



FOLD DOWN BED RAILS:

Simply press the red button to collapse the rail.

Easily swing the bed rail down and out of the way when not in use.

37 INCH LONG bed assist rail can effectively protect your family from rolling off the bed during the night.



EASY TO ASSEMBLE:

Each package includes all of the needed equipment for assembly, no additional tools required.

Allow you assemble and securely install the rail to your bed frame easily.

• FOLD DOWN BED RAILS: Simply press the red button to collapse the rail. Easily swing the bed rail down and out of the way when not in use.
• MODERN DESIGN 一 WINE RED WOOD GRAIN: This railing looks like an exquisite mahogany furniture, very comfortable and natural to blend into your room, making it the perfect bedroom addition.
• BEDSIDE GUARD 一 PREVENT FALLS: 37 INCH LONG bed assist rail can effectively protect your family from rolling off the bed during the night.
• EASY TO ASSEMBLE: Each package includes all of the needed equipment for assembly, no additional tools required. Allow you assemble and securely install the rail to your bed frame easily.
• NOTE THAT: Recommended to use with plywood for better stability; use with any mattress measuring between 2 to 12 inches thick.

User questions & answers

Question:	How to choose the size
Answer:	Thank you for your interest in Goody Products. This item comes in black, red or pink. You could receive any of those colors depending on what is available.

Product description

The Medical Family Bed Auxiliary Handle / Railing provides a secure and reliable handle to help elderly, disabled or anyone with a physical impairment or injury helplessly get out of bed.

This modern armrest design will fit perfectly into any of your bedrooms. Promoting mobility independence and preventing bedside drops are a common problem among the elderly and patients.



Name: Bed rail auxiliary handle

Material: thick stainless steel

Color: Chrome color

Overall size: 60cm × 33cm, 90cm × 33cm

Long steel plate size: 40cm × 5cm

Short steel plate size: 20cm × 5cm

Packaging: bed rail * 1, necessary accessories, long and short steel plates

Installation instructions: thick mattresses over 19cm thick (foldable bed rails need a bed height of 16cm)

                   Medium-thick mattress 10-19cm (foldable bed rail requires bed height 25cm)

                   Thin mattress thickness 5-10cm (foldable bed rail requires bed height 30cm)

                   Lightweight mattresses 0-5cm thick (foldable bed rails require bed height 35cm )



Service: If there is anything unclear about the product, please feel free to contact us via email and we will resolve your confusion within 24 hours.

• 【Fall prevention and Strong support】 - safe and secure to help you get out of bed safely. Allow seniors, people with disabilities, pregnant women or anyone with a physical disability or injury to get out of bed without help.
• 【Thick material】 - stainless steel pipe, precision welding, smooth and tough, comfortable grip, solid steel support base and alloy die-casting fixator, durable, maximum load capacity is 250lbs.
• 【Modern design universal bed rail】 - the bed rail can adjust the height according to the thickness of the mattress, as shown in Figure 4, there are 4 ways to adjust, as shown in Figure 5, Is a variety of thickness of mattress installation renderings, you can compare your home mattress to install.
• 【Folding method 】- When not in use or when making a bed, the support rail can be easily folded down. Simply release the 2 circular knobs from the locked position to fold the slide rail.
• 【Toolless assembly and easy cleaning】-No need to punch holes, assembly in minutes without tools. (If the mattress is too thin, it can be fixed on the bed board with the prepared screws).

User questions & answers

Question:	Si compro el de 60 cm son dos piezas de 60 cm cada una
Answer:	Thank you for your interest in Goody products. This brush has a metal core around the bristles.

• SAFE BEDSIDE SUPPORT — Does your elderly loved one need a little assistance when getting out of bed in the morning? Our Bed Assist Rail promotes independence by providing the assistance they need to pull themselves up and lowering themselves into bed. While this is perfect for seniors, it’s also helpful for those recovering from hip replacement surgery or suffering from back pain. It also helps with changing positions while in bed.
• SLIP-RESISTANT — Our rails are made of a slip-resistant material specifically for those who suffer from limited hand strength or arthritis. The removeable, padded handle provides a comfortable grip and helps stabilize your loved one as they enter and exit their bed. Instead of your loved one relying on their nightstand, bed frame or nearby chair to rise from their bed, they'll be gripping a sturdy, padded handle attached to our heavy-duty steel Assist Rail — reducing their fall risk.
• DURABLE & PORTABLE — The Adjustable Assist Rail is made of durable steel to hold up against regular, everyday use. Unlike other assist rails, made from PVC pipe or other forms of plastic, that bend and even snap over time, ours safely holds up to 300 pounds. Modeled after the Bed Rails used in hospitals, ours is perfect for both medical facilities and home use. Plus, the handle folds flat for convenient storage and allows for easy transport to make it great for travel!
• UNIVERSAL FIT — One size does not fit all. That's why we designed our Assist Rail to easily adjust, in both height and width, to securely fit any bed! Simply push in the buttons on the legs you wish to adjust and slide the leg up or down to lengthen or shorten the bar. The base bar easily adjusts from 34–44.5 inches, while the height can also be adjusted from 13–21 inches to fit any bed from a twin to a California King!
• EASY TO CLEAN & ASSEMBLE — Ever order something that claims it's no-assembly required only to find out there's loads of assembly required? Not our Assist Rail! You won’t fumble around with a bunch of screws, loose pipes and missing pieces. Our rail is truly a tool-free-assembly product and requires absolutely no screwdrivers, hammers or wrenches. Follow along with the easy-to-understand assembly guide and it’ll be ready to use within minutes. To clean just wipe and let dry.

User questions & answers

Question:	I need assembly instructions for pivit by Waymo adjustable bed rail
Answer:	The barrel is 1"; including bristles, it is 1 3/4".

Product features

Help Your Loved One Maintain Their Independence with the Pivit Bed Assist Rail

Our Bed Assist Rail will help your loved one safely and securely get into or out of bed with little to no outside help. The rail easily adjusts to fit any bed, while providing additional stability for seniors, those with unsteadiness, and those recovering from surgery or injury. Follow the easy-to-understand assembly guide and you’ll have a reliable Bed Assist Rail ready to use within minutes.

• Safe Bedside Support — The safety rail is perfect for seniors, those recovering from hip replacement surgery, or suffering from back pain, other injuries or arthritis to get out of bed independently.
• Get A Grip — The bed rail doesn’t slip after installation, providing a secure unit with anti-slip handles for user stability.
• Durable & Portable — The hospital-grade construction is durable and also folds flat for convenient storage and travel portability.
• Universal Fit — Adjustable bed rail width fits onto any-sized beds (Twin, Full, Double, Queen, King, California King) on either side and adjusts from 34” to 44.5” under the mattress, and the height is also adjustable from 13” to 21”.
• Easy to Assemble & Clean — Easy, tool-free assembly only takes a few minutes, and then it simply slides under a mattress. It can be easily removed for cleaning the unit, making the bed and changing the sheets.

What’s in the Box?

• 1 Bed Assist Rail

Product description

Built to last, the Medline Bed Assist Bar provides help getting in and out of bed. It features a soft grip for comfort, pocket for handy storage and straps for added safety. This sturdily constructed bar offers quick and easy tool-free assembly. Includes a nylon bag for storage.

• Easy to use steel rail slides under a bedroom mattress. Allows for a safe assistance to getting in and out of bed independently. The strap allows for a secure fit.
• Bed safety bar can be placed on either side of the bed. The rail helps users get in and out of bed and allows for storage of small items.
• Quick and easy, too-free assembly. Latex-free, sturdy construction. No tools are needed and reduces number of pieces to assemble.
• Height adjustable legs and grip bar. Designed not to slip and to increase stability. Disassembles for easy storage and portability. Curved gripping surface is padded
• Overall product dimensions: 36"-44" Height x 14" Width x 28" Depth. Weighs 6 lbs. Bed assist rail fits most home beds.

User questions & answers

Question:	How do I connect the pocket
Answer:	Can anyone else answer this question? There is no snapping in place mechanism on my pocket and it is evading all logic how it’s supposed to work. The otherwise great instructions don’t give any details on the pocket attachment.
Question:	What is the difference between the 6800BA and the BAH
Answer:	Hello,The 6800BA is for a quantity of 3 and the 6800BAH is just for a quantity of 1.Thanks
Question:	What is the overall HEIGHT of this bedside assist when installed
Answer:	Depends on the height of your mattress. It comes about 15 inches over the top of our mattress. I has been a literal lifesaver for us as my husband can hold on to it to pull himself up and to get his balance before standing up. Before the Medline Assist Bar he slid out of bed many times and had a very hard time getting us without assistance. Now he can do it himself! Saves straining my arms to help him. A real lifesaver!
Question:	One person said this would fit a queen size bed, another noted extra stapping was needed. Which is it
Answer:	We have this on a king size bed, my husband says he didnt use any extra strapping to attach it to the bed. Hope that helps! There are times we have to push it back in because depending on how much, how often and which way you use it it can start to slide out from between the box spring and mattress. Its not a big deal though though im only 5'1" and have no problems getting it back in place by my self.

Product features

Medline Bed Assist Bar

Whether recovering from surgery like a hip replacement, dealing with back pain or arthritis, or just coping with general unsteadiness, the Bed Assist Bar offers added stability for greater confidence and peace of mind.

The Bed Assist Bar fits most beds from twin to queen, as well as most bed heights. It can be placed on either side of the bed, sliding easily between the mattress and box spring. Safety straps are included that wrap around the mattress for extra reinforcement. A simple push-button adjustment lets you slide the legs and soft grip handle up and down to provide a custom fit.

Step 1:

Open the box and remove the contents. Layout all parts on a flat surface area to simplify the assembly process.

We highly recommend you to review Medline's step-by-step user guide (included in box).

Step 2:

Assemble the Bed Assist Bar as instructed in the user guide.

Attach the Storage Pocket to the outside of the Assist Bar.

Step 3:

Take the mattress off the bed. Place the assembled bed assist bar at a desired location on your bed. Wrap the safety strap around the box spring or bed frame from your location to the opposite side of the bed and back again. Tighten. Place the mattress back on the bed.

Step 4:

A simple push-button adjustment lets you slide the legs and soft grip handle up and down to provide a custom fit.

Comfortable Hand Grip

The durable constructed Bed Assist Bar features a soft grip handle for comfort and strong steel design providing you the with added confidence.

Organizer and Storage Pouch

Included with the Bed Assist is a convenient 13 x 9 inches nylon pocket, great for keeping personal items handy.

Height Adjustable

The Bed Assist Bar offers two locations for height adjustment. The hand grip height adjusts up and down to fit various heights of different beds. Legs from the ground up provide extra support for an even more secure fixture.

What's in the box?

Bed Assist Bar, Legs , Support Frame , Base Frame, Brace Bar, Safety Strap, and Storage Pocket.

Product description

The Adjustable Height Home Bed Assist Handle from Drive Medical provides assistance for getting in to and out of your home-style bed. You won't have to worry about the fit since the handle attaches to either side of the bed. It simply slides underneath the mattress and includes an added feature on the base bar, "no-slip foam" that helps hold the bar in place. The removable handle is part of an all steel, chrome-plated construction that is strong, solid and easy to clean. The unit arrives in three pieces and can be assembled quickly and tool-free, and it also can be adjusted flat for easier storage.

• Simple to use handle slides under mattress to provide a safe and secure grip for assistance getting into and out of bed
• Comes in three easy to assemble pieces; No tools necessary. Height adjustment 15 - 20 inches
• No slip foam on base board for increased stability
• Folds flat for easy storage and portability
• Rail dimensions: 32.75"(D) x 19.75"(W) x 13.5 16.5" (H); Weight capacity: 250 pounds

User questions & answers

Question:	It look like the distance between the horizontal rails and the grab bar is fixed. What is the distance between the horizontal rails and the grab bar
Answer:	The grab bar height is actually adjustable. It looks like the grab rail is ABOUT 34" - 39" from the floor. I do not have it installed, so that may be off a little. I can't install it because the legs (even though ajustable) are too tall for my older box spring & frame. Before it can work at my house it would have to fit between the box spring and mattress. My mattress is a little over 14" off the ground. The legs are about 16" tall at their lowest, so installed, the stabilizing bar lifts the mattress off the box spring top. That is a rough measurement because I can't lift the mattress by myself to get the stabilizing bar back in there. Lost my helper to the surgery for a while yet - so I can't be exact. No lifting here at all for a couple more weeks. Sorry about that. It would be a good idea for the right bed. Maybe the manufacturer can give the exact measurements. The adjustable ranges are not printed in the documentation. Unfortunately I tossed it all as well as the box so I can't help with manufacturer's name either.
Question:	What is the weight capacity for this and will it prevent falling out of bed as well as help getting up
Answer:	I don't know what the weight capacity is, my husband is 6'3" and weighs 215 lbs and it works for him. As far as falling out of bed, it depends on where you place it. It definitely helps getting in and out of bed. My mom is 91 and we have one for her as she falls out of bed frequently and she hasn't fallen out singe installing it on her bed.
Question:	Is it possible to place this with the legs inside the bed frame instead of the outside? I'm concerned my dad would trip over the legs
Answer:	The legs do not stick out but sit right up next to the bed frame if you put the device up under the mattress far enough. My mom loves hers. Helps her turn over and sit up on the edge of the bed. She uses a walker also and there is no problem with the device interfering with the walker.
Question:	What is the lowest it can be adjusted to? How far does it insert under the mattress
Answer:	The lowest adjustment to the handle height is sixteen inches (16") from the floor to the box mattress, the highest is 20 plus inches (20" plus). We have a low profile box mattress (13" from floor) so it didn't work. It goes under the mattress 32" to 40". I could see where this item would work very well with a higher box mattress (16" plus from the floor) and therein lies the problem for us.

Product features

Assistance for getting in and out of home-style bed

The Adjustable Height Home Bed Assist Handle from Drive Medical provides assistance for getting in to and out of your home-style bed. You won't have to worry about the fit since the handle attaches to either side of the bed. It simply slides underneath the mattress and includes an added feature on the base bar, "no-slip foam" that helps hold the bar in place. The removable handle is part of an all steel, chrome-plated construction that is strong, solid and easy to clean. The unit arrives in three pieces and can be assembled quickly and tool-free, and it also can be adjusted flat for easier storage.

Product description

The Endurance Hand Bed Rail is designed to help users get in and out of bed. Unit includes a securing strap to attach rail to bed frame. Will break down for travel and will fit in most large suitcases. Easy to install between mattress and box spring with tool free assembly. SPECIFICATIONS: User Weight Limit: 300 lbs. The product is not designed for use in any other type of adjustable bed

• Designed to prevent falls by helping the user to get out of the bed without using a nightstand or other furniture. Non-Slip Hand Grip
• Adjustable height to meet the need of almost any home bed; Made of Chrome Plated Steel
• Will fit any size (twin, double, queen, king) bed with extendable bar that slips between the mattress and box spring
• Includes strap that secures it to the other side of the bed and prevents movement of the rail
• Will support up to 300lbs. 20 inch wide. Extends 3 feet under bed with non-slip sleeves to keep it in place. Height adjustable from 17 to 21 in inches

User questions & answers

Question:	does this assist have a strap to hold it to the springs or bed frame
Answer:	I don't recall it having a strap. If it came with one, we didn't feel a need to use it. The frame attached to the bed rail goes far enough across between the mattress & box springs that a strap isn't necessary. My MIL has a queen size bed, and this rail has worked great.
Question:	Does anyone have direct experience with using this with a sleep number bed? There are different answers here. Thank you
Answer:	I do not have a sleep number bed. However, I can not imagine any problem, unless the bed/ mattress folds. Then, there might be a problem, if you want the bar to extend over the fold. If you place the entire bar on the level part of the mattress, it might more difficult to get out of bed.Some other responders say they have Sleep Number Beds and there is no problem in using this product. If their beds fold upward raising your head and upper torso, then there would be nothing for you to worry about. This bar is a great help. However, it is more difficult to make the bed then than without the bar structure.
Question:	My platform bed is 14 inches from floor to bottom of the mattress. Does this adjust to that low
Answer:	My bed is approximately 14 3/4 inches from the floor to the bottom of the mattress. There is some adjustment available on the legs when you set it up. I think it should be fine.
Question:	Is the part that goes under the mattress a solid piece or is it an open frame like the visible part
Answer:	The piece that goes under the mattress is a tubular frame. Your body weight holds it down. I'm a big guy, yet this bed rail is very strudy. Overall, a great product.