11 best wall mounts for tcls

Product description

Will the TV wall mount fit my TV?

First, please check your wall for wood studs, it cannot be used on concrete wall or drywall alone. Anchor needed is for concrete wall installation.

Next, the weight of your TV should be less than 99lbs (45kg).

Then, mounting holes distance on the back of TV must be less than 16" (400mm) horizontally and 16" (400mm) vertically.

Your TV should be at least 26 inch. Otherwise, you will see the bracket.

In addition, please check the area inside the 4 mounting holes to make sure there are not any plugs. Otherwise, the plate may block the plugs.

Finally, please check possible blocked cable/input.

 

Specifications:

•     Fits 26" to 55" flat panel TVs
•     Supports TV weight up to 99lbs (45kg)
•     Fits VESA mounting hole patterns:100x100mm/200x100mm/200x200mm/300X200mm/300x300mm/400x200mm/400x300mm/400X400mm
•     Low-profile design with a scratch-resistant finish, offers a stylish look and save your space.Tilts downwards from 0° to 8° for enjoy a comfortable view of your show.
•     Open wall plate enhances cable management options. Click, lock and release offers seamless adjustment, safely and easily place your TV where you want it most.
•     Wall mounting studs distance up to 16"
•    

  Package includes:

  
  
  

  1x TV wall mount

  1x Standard mounting hardware

  1x 6ft high speed HDMI cable

  1x magnetic bubble level

  3x Cable ties

  1x User manual

  • ☞ UNIVERSAL DESIGN - our ultra strong TV mount fits most 23-55" TVs weighing up to 99lbs like Samsung, TCL, LG, Sony, Vizio, Panasonic, Thomson, Toshiba, Sharp, Philips etc. Solid and sturdy TV bracket with compatible faceplate that fits VESA patterns from 100x100mm to 400x400mm. Can be conveniently mounted on 8" or 16" wood stud walls and concrete/brick walls. Please check the VESA pattern, weight, size of your TV before purchasing.
  • ☞ SAVE SPACE & ANTI-GLARING - our TV wall mount is fixed a mere 1.3“ to the wall to save space in your living room and home. Comes with a built-in tilt feature that allows you to tilt down 0-8°, so you can choose the most comfortable position while reducing glare and neck/eye strain.
  • ☞ SAFE & CONVENIENT: this tilt TV wall mount has an open wall plate design allowing it to be mounted directly over electrical outlets for a super clean installation. Pulling straps can help you locks and releasesTV breezily and the elegant panel edges prevent your TV from slipping off.
  • ☞ EASY INSTALLATION - comes with all the required mounting hardware needed, a detailed english graphical installation guide that is actually useful (and even funny) which helps you to install this TV wall mount without any hassle.
  • ☞ FRIENDLY AFTER-SALES SERVICE - our TV wall mount is constructed from high quality steel materials, we are so confident in the construction, strength and durability of this wall bracket. Please feel free to contact us anytime, rain or shine:-)

User questions & answers

Question:	Will this work for a element elefw408 tv
Answer:	Ya you should have no issue just make sure your tv is not bigger then the wall mount recommends. Which is 26"-55" tv and up to 99lbs my tv is 55" and it fits perfectly
Question:	Does this 55 tv wall mount come with the M6 screws for my samsung TV
Answer:	Dear Customer, Thanks for your question. Yes, our 55 tv wall mount PIMTK1 comes with the hardware for your samsung TV. It is including the M4.M6.M8 screws. If you have any other questions, please feel free to contact us at [email protected]. Best regards Helen Customer Service Center
Question:	Do I have to use a drill
Answer:	Yes you do
Question:	How many watts does this use? Want to use with solar
Answer:	0 watts. Just like every other TV mount in the world. I have my TV mount attached to a generator, just in case though.

Product description

Specifications:

TV size range: 50" 55”60”65”70”75”80”85”90"

Weight rating: 165lbs

Supported VESA patterns: 800x400mm/600x400mm/400x400mm/400x300mm/400x200mm/300x300mm/300x200mm/200x200mm

Swivel: ±60º

Extension: 23.62"

Profile from wall: 3.07"

Tilt: 15º down, 5º up

Post install leveling: 3 degrees

Compatible stud width: 16”-24”

 

Note:

1.This TV wall mount fits for wood studs or concrete wall installation only, not for drywall. The required anchors for concrete wall installation are included in package.

2.As a full-motion TV wall mount, PSXFK1 can work with most of the brands like SAMSUNG/SONY/LG/TCL/VIZIO/Hisense/SHARP/Toshiba/Panasonic/Philips and more. Your TV brand has not been listed? Never mind. Our US-based customer support on call 7days a week to help you out!

 

Package includes:

1x TV wall mount

1x Necessary mounting hardware

1x User manual

• Enormous Capacity For Lagre TV: Heavy-gauge TV mount is strong enough to support TV screens up to 90" or 165 lbs, plus tested with up to 4x the rated weight limit, which makes the whole TV mounting bracket sturdy and safe. Fits both flat and curved TVs with max VESA of 800mm x 400mm.
• Maximum Flexibility: Articulating TV wall mount is designed with tilt TV toward 15° and backward 5° to reduce reflections from lights and windows. +/-60° swivel allows to view your TV from multiple seating areas in a room. No worry about poor seat.
• Unbelievable Extension: Is the screen hidden by the cabinets in the entertainment center? This TV mount extends up to 23.6" and sits 3" from the wall. Swinging it out to whatever angle you'd like to watch from, then easily tuck it back when you're not using it.
• Easy To Use: It comes with all required mounting hardware and we believe in it's easy to installation follow the manual and installation video. TV mount is heavy-duty and safe but not bulky. Large TV can achieve flexible movement and easy to use.
• US-based Customer Service: We are ready to provide the awesome TV wall mount at a great value and glad to answer your pre-purchase and installation questions. If you run into questions, our US-based customer care team 7 days a week to help you out.

• HEAVY DUTY DESIGN TV MOUNT: Our TV wall mounts are constructed from high quality steel materials and fit most 42-70 inch TVs up to 100lbs, with VESA 200x100mm to 600x400mm available. Images on the left side will help you see if this TV wall mount perfectly fits your TV in the aspects: VESA, studs spacing and possible blocked input. Not perfect? You can check other Mounting Dream TV mounts for options.
• ADJUSTABLE VIEW COMFORTABLE: This full motion TV mount allows ±4°post-installation adjustment for perfect TV leveling, +5°/-15°tilt for reducing glare, ±45°swivel (maximum swivel angle depends on TV size) for optimal viewing angles. Easily customize your TV watching experience to find the most comfortable and healthiest viewing position.
• CABLE MANAGEMENT & SPACE-SAVING: The swivel TV wall mount comes with 4 cable clips for cable management, the wires will never mess up again. This flat screen TV wall mount supports to pull your TV out 16.6" away from the wall for ultimate viewing and place back 2.5" from the wall for space-saving.
• EASY TO INSTALL: The wall TV mounts for flat screens can be installed on 12-16” wood studs or concrete walls. Please DO NOT install on drywall alone. This articulating TV mount full motion will come with clear installation instruction and all hardware in pre-labeled bags (Remarks can help you distinguish which screw you should use). Concrete anchors will be sent per request.
• CUSTOMER SERVICE: Our US-based customer service experts are available every day to help. If you have any problem or concern about the TV wall mount, please contact us anytime. Our TV mount is 10-year service.

Product features

TILTS YOUR TV TO DESIRED ANGLE

The full motion TV mounts allow to tilt TV 5°up and 15°down to eliminate glare & reduce neck or eye strain.

EXTENSION TO CUSTOMIZE YOUR VIEWING POSITION

TV mount can be extended to 16.6” from the wall to meet your viewing needs and retracted to 2.5” from the wall for space-saving.

ENJOY BEST VIEWING EXPERIENCE ANYWHERE

The TV wall mount TV bracket with ±45 degrees of swivel will give you the best viewing experience from anywhere.

• UNIVERSAL FIT TILT TV MOUNT: Universal design fits virtually all flat-panel TVs with 32, 37, 40, 42, 45, 47, 49, 50, 55, 60 and some up to 70 and 75 inches in screen size. VESA compatible 200x200, 300x300, 400x200, 400x300, 400X400, 600x200, 600x300, 600x400, 700x400, 750x450. Fits TVs with installation holes up to 29" apart horizontally and 17.5" apart vertically.
• HEAVY DUTY TV WALL MOUNT: Do not trust your precious TV to a flimsy and cheap wall mount. This heavy duty TV mount has carrying capacity of 175 lbs. Constructed from 2 mm thick Reinforced Steel.
• NO GLARE TILT FUNCTION: Continuous tilt motion of up to 15 degrees without the use of tools. Easy one touch tilt to reduce glare.
• LARGE CABLE ENTRY OPENINGS: Back of the TV stays 3 1/4" away from the wall. 30 inch wide wall plate supports block wall installation or installation on either 8", 12", 16" or 24" wall studs. Back Plate features three large openings to pass cables through. The openings allow installation over plug sockets and Ariel plates.
• EASY INSTALL: Very simple to install. Includes complete hardware kit, integrated bubble level for alignment and installation instructions.

User questions & answers

Question:	I don't see 200x200 listed. will this fit a vizio e55-c2? (55 in tv
Answer:	Are you sure a 55-inch TV has only a 200x200 mm (about 8x8 in) bolt pattern? That doesn't sound right. I would double-check those measurements first.
Question:	what is the degree of tilt
Answer:	15 degree angle up and down is my guesstimating only because I only did it once with mine when it was first put up just to see what it looked like but a 70 inch doesn't look good tilted when it takes up practically the whole wall. I wish I could be more helpful but it is a Great Wall mount!
Question:	my Vizeo has a 200 x 200mm bolt pattern. Specs do not state this small. Will this mount fit 200 X 200mm
Answer:	This tv wall mount is compatible with VESA 200 x 200 mm pattern.
Question:	will it hold a 50 inch 4k samsung tv
Answer:	This is a universal TV wall mount with adjustable arms to fit various TV models. Please check the bolt hole pattern behind your TV. If the mounting holes are up to up to 30" apart horizontally and 17.7" vertically this mount will work with your TV.This mount can carry 175 lbs, so the weight of the TV should not be an issue.

Product features

Mount-It! Tilting TV Wall Mount

Premium Tilt TV Wall Mount

MI-303B safely secures your precious flat screen television to any wall. This sturdy TV mount has sleek design that sits a few inches away from the wall, with two adjustable brackets that tilt up to 15 degrees. It is great for improving the appearance of any room, with the convenience of tilting your TV screen to a comfortable viewing angle. 



Universal Design

MI-303B is VESA compatible and works with virtually all TV brands and screen sizes. Just check the bolt hole pattern of the TV to ensure the bolts are located at a maximum of 24 inches wide and 16 inches high. This VESA pattern covers most larger TVs up to some 65 or even 70 inches in screen size. VESA compatible 100x100, 200x100, 200x200, 300x300, 400x200, 400x300, 400X400, 600x200, 600x300, 600x400.



Heavy-Duty

Don't risk your TV with the cheaper models! Cheaper mounts use lower grade and thinner materials. MI-303B is made from 2mm thick cold-rolled high-grade steel. With its rigid reinforced wall plate and two adjustable brackets it can safely hold your flat screen TV up to 175 lbs. 



Easy Installation

MI-303B is easy to install and comes with all the necessary hardware and easy-to-follow instructions. Install in 3 simple steps:



1. Locate the the studs on your drywall, or the appropriate mounting position on a brick wall and secure the wall plate to the wall. 

2. Connect the two vertical brackets to the back of the TV.

3. Hang the brackets and the TV to the wall plate and lock in the safety latches. ...and you are done!!!



Tilting Design

MI-303B features easy-to-turn adjustable tilt knobs on the brackets to securely tilt your TV up to 15 degrees both up and down to optimize your viewing angle from your seating area. Tilting the TV down helps reduce glare. 



Join the millions of happy Mount-It! customers that enjoy their wall mounted TVs. 

• Fits Monitor with VESA 100x100mm 75x75mm
• High grade steel material offers loading capacity to 44lbs
• Post-installation level adjustment allows the monitor to perfectly level; Detachable VESA plate makes for one-person installation
• Adjustable +/-5 degree tilt, 180 degree swivel, 360 degrees rotate. Retracts to 2.4"save space, extends up to 15" from the wall
• Common hardware pack included in the package

User questions & answers

Question:	can this be mounted on dry wall without studs
Answer:	No, there is only a sleeve that just barely fits a full-size iPad.
Question:	What’s the measurements of the back plate that screws to the wall
Answer:	Yes, I had about a month of purging, but just small pimples in areas that I typically have hormonal breakouts. If you are having breakouts worse than usual, or in areas you don’t usually have them, it may be a reaction and not purging.
Question:	Dose it come with all the mounting screws
Answer:	The label shows 500,000 IUs. I am no expert but I believe this is a reasonably high dose for a non prescription product.
Question:	Does this fit a 32-inch 720p roku smart led tv
Answer:	I think one is a serum and the other is a lotion. I don't think it was worth the price. I bought the serum and the brightener, did not see any improvement.

Product description

Fits 37-70" Tus this mount fits most of 37-70" Tus sold today. It fits TVs with mounting holes as close as 8"x4" Or as wide as 24"x16" (In TV terms - VESA 200x100mm to 600x400mm). low 1. 5" Profile flush-tilt design is only 1. 5" From wall yet still tilts to improve viewing and reduce glare. Heavy duty steel construction and automatic robot welding technology This mount is constructed with heavy duty steel materials and with durable powder coated finish, and 100% welded by automatic robot, this advanced welding technology makes the mount sturdy and ensures mounted TV stable and secure, supports TV weight up to 132 lbs. Fits 16", 18'' Or 24" Studs plus concrete wall This mount fits for 16", 18'' Or 24" Studs plus concrete wall typical in us homes. Not for dry wall alone application. All installation hardware included. Torpedo bubble and 6' High Speed HDMI cable It comes with Torpedo level and 6' Hemi cable. Hemi cable supports 3D, Ethernet, 1440p and audio Return conforming to latest HDMI 1. 4 standard. Includes all Necessary mounting hardware This mount ships with hardware for both wall and TV mounting. Rosh certified This product is robs certified, RoHS is the European Union Directive standard of restriction of Hazardous substance, aiming to protect human health and environment. Prevents falling off from both sides of Horizontal bar you can slide the TV Assembly Left and right over the horizontal bar of the wall plate but still can prevent the TV Assembly from falling off from the horizontal bar because of the stop plates at both ends of the bar. Universal for: 37”, 39”, 40” 42”, 49”, 55” 65” 70” Sony, Samsung, LG, Vizio, Toshiba, Philip, TCL and more TVs. This TV wall mounts is perfectly compatible but not limited to the following TV models: 40S325, 43S325, 43S425, 49S325, 50S425, 55R617, 55S425, 55S517. Toshiba 32LF221U19, 43LF621U19, 50LF711U20, 55LF711U20. RCA UN43J5200. LG 43LJ5500, 43UM7300PUA, 49UM7300PUA, 55SK9000, 55UM7300PUA, OLED55B8PUA, OLED55C7P, OLED55C8P, OLED55C9PUA, OLED55C9PUA, OLED55E8PUA. Samsung QN43Q60RAFXZA, QN49Q60RAFXZA, QN49Q6F, QN55Q60RAFXZA, QN55Q60RAFXZA, UN32M4500, UN43NU7100FXZA, UN43RU7100FXZA, UN50RU7100FXZA, UN55B7100, UN55D7000, UN55MU6490FXZA, UN55MU8000FXZA, UN55MU8500FXZA, UN55RU7100FXZA, UN55RU8000FXZA.

• Patented design Tv mount: TV wall mounts fit most 37-70" Up to 132 lbs, with max VESA 600 x 400mm. Images on left side will help you check VESA, TV weight, wood studs spacing and possible blocked input. Not perfect? You can check other Mounting Dream TV mounts for an ideal match. Patent no. 29/639, 502
• Save space: low profile TV wall mount place your TV close to wall 1. 5” flush profile, This TV mount saving space greatly with stylish appearance
• Reduce glare: tilt your TV forward up to 8 degrees to reduce glare for better viewing
• Easy to install: 3-step easy installation TV mount with decent instruction, wall mounts can be taken off for easy installation by one person. Comes with a 6 ft. Hdmi, Torpedo level and cable ties for cable management. Concrete Anchors available on request. All our TV mount are not for dry wall alone installation!
• WORLD-CLASS CUSTOMER SERVICE: Our US based customer service experts are available Every day of the week to help, backed up by our leading 10-year ! Newest model with sliding feature, please go to ASIN: B07F9VYT5G

Product features

Tilting TV wall mount - Freely adjustable tilt 0°～8°

Pull TV to your desired angle then fasten 2 tilting bolts with Allen key.

Low-profile TV mount - 1.5'' Slim profile for saving space

To keep TV in vertical position, please use two pins to insert the holes on two brackets respectively.

Easy for TV centering - TV can easily move to be centered

This TV mount fits for solid concrete wall/ wood stud (16"/18"/24" spacing ). Easy centering with 24" wall plate (lateral adjustment).

Open wall plate design for outlets

The wall plate of this TV mount is open design which will not block the outlet.

• 👍【UNIVERSAL DESIGN】This full motion TV mount fits for most of 26-55inch TVs with VESA size 75*75mm to 400*400mm available and perfect center design.
• 👍【ADJUSTABLE VIEW COMFORTABLE】This TV bracket with dual articulating arms includes +5° /-15° tilt, ±90°swivel( maximum swivel angle depends on your TV), +/-5° post-installation adjustment allows the perfect TV leveling. All these will make your TV flexibility and better view based on your seat in the room.
• 👍【EASY TO INSTALLATION】Easy installation with detailed instruction and all included hardware in pre-labeled bags(Remarks can help you distinguish which screw you should use). 🌞Warm tips: In order to avoid customer misusing concrete anchors onto wood studs or drywall directly causing any safety issues, we removed concrete anchors from our package. If you need concrete anchors, please contact us to get it for free which be sent from USA.
• 👍【SAVING SPACE】This full motion tv wall bracket can pull out to 18.95” and retract back to 2.81”, which save some valuable space for you and make your house look neat.
• 👍【PRODUCT INCLUDES】Come with bubble level, 3 pieces pack of cable ties and all standard mounting hardware(►TV Screws: M4*12mm 4pcs, M4*30mm 4pcs, M6*12mm 4pcs, M6*35mm 4pcs, M8*25mm, M8*45mm. ►Spacers: M6*17mm 4pcs, M8*22mm 4pcs, 10mm 4pcs, 2.5mm 8pcs. ►Washers: M4 4pcs, M6 4pcs.), 10-year friendly US-based customer service.

Product description

UNIVERSAL DESIGN TV MOUNT

TV wall mounts with strong dual arms fits for most 32-55 inch TVs up to 99 lbs. compatible with VESA (TV mounting hole pattern) from 75 x 75mm to 400 x 400mm, (Wall mount TV bracket specifically it fits VESA 75x75mm 100x100mm 200x100mm 200x150mm 200x200mm 300x200mm 300x300mm 400x200mm 400x300mm 400x400mm) fitting wood studs up to 16 inch center to center.



UPGRADE YOUR VIEWING EXPERIENCE

Full motion TV wall mount makes your viewing more comfortable. Wall mount TV bracket tilts TV backward 5° and forward 15° to reduce glare 45°, swivels and 3° levels adjustment for maximum viewing flexibility TV mounts with dual articulating arms with 15 2 inch extension and 3 inch depth to wall.



HEAVY-DUTY DESIGN FOR STABILITY AND SAFETY

The heavy-duty steel materials with a durable powder-coated finish and 100% welded by automatic robot. The technology of robot welding makes the whole TV mounting bracket unit sturdy and safe.



EASY INSTALLATION

TV mounts with clear instruction mounting template HDMI cable bubble level and all hardware are included in pre-labeled bags for your quick and safe installation.



HIGH-SPEED HDMI CABLE

TV mount package comes with HDMI cable supports 3D Ethernet 1440p and Audio Return conforming to the latest HDMI 1.4 standard.



Questions? Unsatisfied? Suggestions? Contact us. US-based customer support can solve your problems with the TV wall mounts ASAP.



NOTE1: PLEASE DO NOT INSTALL THE TV MOUNT ONTO DRYWALL WITHOUT WOOD STUDS.

NOTE2: PLEASE CONTACT US IF YOU NEED CONCRETE ANCHORS FOR YOUR INSTALLATION.

• 【UNIVERSAL TV MOUNT】 The TV wall mount fits for most 32-55 inch TVs up to 99 lbs., with max VESA of 400mm x 400mm/16" x 16" and 16 inch wood studs spacing. Not perfect? Please check MD2380-24K, MD2380-24 or MD2298 for your best idea.
• 【UPGRADE VIEWING EXPERIENCE】 This full motion TV mount tilts TV up 5° and down 15° to reduce glare, swivels TV left or right according to your seat position. Pulls out to 15. 2 inch and retracts back to 3 inch, making your TV alive to move.
• 【EASY INSTALLATION】 TV wall mounts with clear instruction and hardware in pre-labeled bags. +/-3° post-installation adjustment allows perfect TV leveling after installation. The paper template makes the installation of the wall mount TV bracket easier. The TV mounts with considerable design for Allen key storage.
• 【HEAVY-DUTY UNIT】 TV wall mount swivel and tilt designed with 6 articulating arms. The technology of robot welding makes this wall mount TV bracket sturdy and safe. This full motion TV wall mount has passed UL Test.
• 【US-BASED CUSTOMER SUPPORT】We are glad to answer your pre-purchase and installation questions about TV mounts. Mounting Dream TV wall mounts are NOT FOR DRYWALL INSTALLATION. Concrete anchors will be shipped if needed.

User questions & answers

Question:	What are the dimensions for the part that attaches to the tv
Answer:	The two vertical brackets are approximate 15 1/2 inches long by 1 inch wide. You fasten them to the TV then lift the TV into place. The horizontal 'H' shape piece that you lift you TV onto is approximate 18 inches by 5 1/2 inches. It is a well built easy to mount system I purchased 3 units for all my TV and I'm very happy that I did. I took a photo to upload but there's no place to do that. Then photo was to illustrate that my 55 inch Samsung curved screen is using that horizontal 'H' mount to its fullest extent. The curved screen has no effect on the install
Question:	distance from wall
Answer:	Dear Amazon Customer.Thank you for the interest and contacting us regarding the Mounting Dream Mount. We understand and we're glad to help. The MD2380 retracts to 3" inches flat against the wall, and extends up to 16" inches from the wall.Thank you!
Question:	My apartment has no studs. How can i mount this
Answer:	Answer to your question is this: There are always studs. They may not be wood, but they are there. Use a magnet or "stud" finder to locate them. All they do is find the nails that the drywall is screwed/nailed to. Studs are now made of aluminum which the stud finder won't detect....except for those pesky little nails which still show up! Next, don't make the mistake I made which is all studs are 16" apart. Find them first, if they are 24" you need to buy the extension are to accommodate a 24" stud spread, because this is a great product, but is only for 16" studs.
Question:	What are the base demons ions where you mount it to the wall
Answer:	Dear William.Thank you for the interest and contacting us regarding the Mounting Dream Mount. We understand and we're glad to help. The MD2380 base (wall plate) dimension is (LxH) 17" x 10.25" inches.If you should have any additional questions/concerns, please feel free to contact us again anytime!Thank you!

Product features

FULL MOTION TV MOUNT--TILTING ANGLE ADJUSTMENT

Want to reduce glare from lights？

• Pull TV to your desired angle, then fasten 2 tilting bolts with Allen key.
• This TV mount can tilt your TV forward/ backward to reduce most glare.

FULL MOTION TV MOUNT--EXTEND & RETRACT TV

Want to point your TV exactly where you want it?

• Hold TV’s two sides and extend it out.
• Pull out and retract back TV wall mount for better viewing experience.

FULL MOTION TV MOUNT--SWIVEL ANGLE ADJUSTMENT

Want to get a better view?

• It is easy and quick to swivel your TV with the articulating arms.
• This full motion TV mount can swivel for your special need.

FULL MOTION TV MOUNT--LEVEL AFTER INSTALLATION

Want to level TV anytime?

• Loosen 4 leveling bolts on the rear of the TV plate by maximum 2 turns and re-tighten to secure after adjusting.
• This wall mount TV bracket allows +/-3° leveling after installation.

SAY GOODBYE TO SCREEN GLARE

The TV mount can tilt your TV forward 15° and backward 5° to reduce the glare from light.

EXTENDABLE LIKE LUFFY THE MONKEY

The TV wall mount can fully extend 15.2” from wall to point your TV exactly where you want to view it from.

VIEW YOUR TV FOR MAXIMUM COMFORT

Want to watch movie with your family from any seat in the room? Now you can adjust your wall mount TV bracket left or right 45° for the optimal view.

Product description

Specifications:

Fits 26" to 55" flat/curved panel TVs and supports TV weight up to 88lbs.

（eg. 26" 29" 30" 32" 36" 40" 42" 43" 45" 46" 48" 49" 50" 55" TVs & monitors ）



As a full-motion TV wall mount, PSMFK1 can work with most of the brands like SAMSUNG/SONY/LG/TCL/VIZIO/Hisense/SHARP/Toshiba/Panasonic/Philips and more. Compatible with the following TV models(not limited):



SAMSUNG UA55ES6100, UA55ES6700, UA55ES7000, UA55ES6800, UA55ES6700 LG 50PA4900, 50PA4700, 50PM9700, 50PM6700, 55LA6970, Sony KDL-55W800C, XBR-55X900C, KDL-50W800C, KDE55XBR950, KDL52S4100 etc.



Your TV model has not been listed? Never mind. Our US-based customer support on call 7 days a week to help you out!



Fits VESA patterns:

400x400/400x300/400x200/300x300/300x200/200x200/200x100/100x100/75x75mm

( In inches: 16"x16"/16"x12"/16"x8"/12"x12"/12"x8"/8"x8"/8"x4"/4"x4"/3”x3”)



Package includes:

1x TV wall mount

1x Necessary mounting hardware

1x User manual



If you have a TV larger than 55" that you still need to mount, check out the PERLESMITH compare chart. We are ready to provide the awesome product at a great value, let your TV mounted to improve the viewing experience

• UNIVERSAL DESIGN: Our TV bracket fits most 26 - 55 inch TVs weighing up to 88lbs/40kg. Removable extender brackets forms different combinations achieving one stop solution for most medium TVs, compatible faceplate fits VESA 400x400mm/400x300mm/400x200mm/300x300mm/300x200mm/200x200mm/200x100mm/100x100mm/75x75mm. Note: Not suitable for VESA 200x300mm, 100x200mm
• SWIVEL, TILT & LEVEL ADJUSTMENTS: This TV wall bracket comes with a +6.3°/-16.6°tilt, +/-90°swivel (max. swivel angle depends on TV size) and +/-3°level adjust for maximum viewing flexibility and customize your special viewing experience.
• ULTRA STRONG ARM HOLDS UP TO 88lbs: Tested to hold 4 times the weight they're rated to based on UL standard and made with high grade steel, our heavy-duty swivel TV mount is supposed to hold LED, LCD, OLED flat screen TVs up to 88 lbs.
• SLIM DESIGN: This articulating TV wall mount is built with an arm that retracts a mere 2.3" from the wall for out-of-the-way convenience extends up to a maximum of 19.5" from the wall.
• US-based Caring Customer Service: We are ready to provide the awesome TV wall mount at a great value and glad to answer your pre-purchase and installation questions. If you run into questions, our US-based customer care team 7 days a week to help you out

Product features

PERLESMITH - UNIVERSAL FULL MOTION TV WALL MOUNT

Product description

Description:

The tilting wall mount is for 23"- 55" flat-panel TVs, its tilting system provides easy adjustment of viewing angle. Adjustable TV brackets offer lateral shift movement to allow perfect TV placement.

Its TV brackets click into place on the wall plate for added safety and security. TV is positioned just 1. 2" / 3. 04 cm from the wall for a clean, low-profile appearance. Comes with 3 pcs cable ties saving you money!



Please check whether the mount is suitable for your TV:

Please check your wall for wood studs, it can’t be used on concrete wall or drywall alone.

Please check the weight of your TV. It must be less than 115 lbs / 52 kg. Look at the back of your TV, find the mounting holes and measure the width and height, if the width is within 16", height is within 16", the bracket will work perfectly for you.



Specifications:

Fits 23" to 55" flat panel TVs. Supports TV weight up to 115 lbs (52kg). Wall mount studs distance up to 16". Low-profile design mounts your TV just 1. 2" from the wall. Tilts up to 7 degrees for an optimal viewing experience.



VESA Mounting Standard: 75 x 75mm, 100 x 75mm, 100 x 100mm, 200 x 100mm, 200 x 200mm, 300 x 200mm, 300 x 300mm, 400 x 200mm, 400 x 300mm, 400 x 400mm.



Features:

We engineered structure made with Less Metal - Green design makes the mount sturdy and stronger with less metal. The design ensures TV mounting stability and security. Convenient quick-release tabs design which you can easily pull down to unlock the TV from the wall plate. Horizontal movement adjustment for perfect TV positioning.



Package Contents:

1x TV wall mount

1x Standard mounting hardware

1x User manual

• ▶UNIVERSAL DESIGN: Tilted TV wall mount for 23" - 55" TVs weight up to 115lbs / 52 kg. Our TV tilt mount has a compatible faceplate that fits VESA 75X75mm (3"x3") 100X75mm (4”x3”) 100X100mm (4"x4") 200X100mm (8"x4") 200X200mm (8"x8") 300X200mm (12”x8”) 300X300mm (12"x12") 400X300mm (16"x12") 400X400mm (16"x16"). Please check VESA (Mounting hole pattern on the back of TV), TV weight, wall stud location and possible blocked cable/input
• ▶SAFE TO USE: High quality steel construction ensures safety. This wall mount TV bracket has high standards. It has been tested to hold 4 times the weight they're rated to based on UL standard so you can rest assured that it will hold the weight of your TV. It also comes with a locking mechanism with quick release which easily secures your TV to the wall
• ▶EASY INSTALLATION: Hang your television like a pro! Easy to install on 16 inch wood studs with standard hardware. Get rid of the irritating glare from your screen and conveniently tilt your TV up to 7 degrees forwards or backwards as well as the ability to shift your baby laterally for perfect centering on your wall (Maximum tilt angle depends on TV size and the distance from the wall )
• ▶SAVE SPACE: Keep your TV close to the wall to save space. Our low profile tilting mount holds the back of the TV just 1. 2" away from the wall for a sleek and tidy appearance
• ▶US BASED CUSTOMER SUPPORT: Patent No. : 29709935. Standard mounting hardware, 3 pieces pack of cable tie, and friendly customer service. We provide what you need to make installation as easy and convenient as possible!

Product features

PERLESMITH Tilting TV Wall Mount Bracket for 23-55 Inch TVs

PERLESMITH Mount -- Make Your World Better

The tilting wall mount is suitable for 23" - 55" flat-panel TVs. Its tilting system makes it easier to adjust the viewing angle. The design ensures TV mounting stability and security. Adjustable TV brackets offer lateral shift movement to allow perfect TV position, even with off-center wall wood studs. TV is positioned just 1.2" / 30.4 mm from the wall for a clean, low-profile appearance. Comes with 3 pcs cable tie, to save you time and money!

Please check whether the mount is suitable for your TV:

First, please check your wall for wood studs. Our mount can also be used on concrete walls however, concrete anchors are not included. It can't be used on drywall.

Next, the weight of your TV should be less than 115 lbs (52kg).

Finally, look at the back of your TV. Find the mounting holes and measure the horizontal and vertical distance. If the horizontal distance is within 16" and the vertical distance is within 16", then the bracket will work perfectly for you.

Please Note : Only fit the mounting hole is 400mm/16" or less. Can't fit VESA 600X200mm and 600X400mm and TCL 55S405 / Vizio GV46L / Samsung hp-t5054 / Samsung LN46A650 / Samsung HP4253 / LG 50PC5DC / Philips 42HFL5860D.

Features:

Well engineered structure made with Less Metal - Green design makes the mount sturdy and stronger with less metal. The design ensures TV mounting stability and security. Convenient quick-release tabs design which you can easily pull down to unlock the TV from the wall plate. Horizontal movement adjustment for perfect TV positioning.

Specifications:

Tilts up to 7 degrees for an optimal viewing experience.

Fits 23" to 55" flat panel TVs.

Supports TV weight up to 115 lbs (52kg).

Tips: Please adjust the tilt angle first and then put on your TV (Maximum tilt angle depends on TV size and the distance from the wall).

Product description

▶Specifications:

TV size range: 32" - 55" （Such as 32" 40" 42" 43" 49" 50" 52" 55" TVs)

Weight rating: 99lbs

Supported VESA patterns: 400x400/400x300/400x200/300x300/300x200/200x200/200x100/100x100/75x75mm

( In inches: 16"x16"/16"x12"/16"x8"/12"x12"/12"x8"/8"x8"/8"x4"/4"x4"/3”x3”)

Swivel: ±90º

Extension: 16.53"

Profile from wall: 3.15"

Tilt: 12º down, 5º up

Post install leveling: 3 degrees

Compatible stud width: 12” or 16”



▶Note:

1.This TV wall mount fits for wood studs or concrete wall installation only, not for drywall. The required anchors for concrete wall installation are included in package.

2.As a full-motion TV wall mount, PSMFK9 can work with most of the brands like SAMSUNG/SONY/LG/TCL/VIZIO/Hisense/SHARP/Toshiba/Panasonic/Philips and more.

Your TV brand has not been listed? Never mind. Our US-based customer support on call 7 days a week to help you out!



▶Package includes:

1x TV wall mount

1x Necessary mounting hardware

1x User manual

• Universal TV Mount - Our TV bracket fits most of 32”-55” TVs VESA pattern 75x75mm(3”x3”) to 400x400mm(16”x16”), such as Samsung Sony Vizio LG TCL Sharp and more. It can be mounted on 16” wood studs, concrete/brick wall and concrete anchors are included. Have a TV larger than 55"? Check PSLFK1
• Easy to Assemble - One piece design TV wall mount allows you mount your TV a breeze, and precise installation like a professional. Come with all required hardware, decent manual and video guide so you will have your TV on the wall in no time. Ah, the open wall plate also leave more space for wall outlets
• Ultimate Viewing Experience - With tilt TV toward 12° and backward 5° to reduce reflection from light or windows and avoid muscle and neck pain. Extends up to 16.53", +/-90°swivel allows to view your TV from multiple seating areas in a room.
• Heavy-duty & Safety Tested - PERLESMITH TV wall mount is tested with up to 4x the rated weight limit and it can hold your TV easily up to 99 lbs. As a product for home use, with a safe and stable structure, and 8.8-level wall-securing screws for more safety, we always make customer safety our top priority.
• US-based Customer Service: We are ready to provide the awesome product at a great value and glad to answer your pre-purchase and installation questions. If you run into questions, our US-based customer care team 7 days a week to help you out