11 best tv wall mount full motions

• 👍【UNIVERSAL DESIGN】This full motion TV mount fits for most of 26-55inch TVs with VESA size 75*75mm to 400*400mm available and perfect center design.
• 👍【ADJUSTABLE VIEW COMFORTABLE】This TV bracket with dual articulating arms includes +5° /-15° tilt, ±90°swivel( maximum swivel angle depends on your TV), +/-5° post-installation adjustment allows the perfect TV leveling. All these will make your TV flexibility and better view based on your seat in the room.
• 👍【EASY TO INSTALLATION】Easy installation with detailed instruction and all included hardware in pre-labeled bags(Remarks can help you distinguish which screw you should use). 🌞Warm tips: In order to avoid customer misusing concrete anchors onto wood studs or drywall directly causing any safety issues, we removed concrete anchors from our package. If you need concrete anchors, please contact us to get it for free which be sent from USA.
• 👍【SAVING SPACE】This full motion tv wall bracket can pull out to 18.95” and retract back to 2.81”, which save some valuable space for you and make your house look neat.
• 👍【PRODUCT INCLUDES】Come with bubble level, 3 pieces pack of cable ties and all standard mounting hardware(►TV Screws: M4*12mm 4pcs, M4*30mm 4pcs, M6*12mm 4pcs, M6*35mm 4pcs, M8*25mm, M8*45mm. ►Spacers: M6*17mm 4pcs, M8*22mm 4pcs, 10mm 4pcs, 2.5mm 8pcs. ►Washers: M4 4pcs, M6 4pcs.), 10-year friendly US-based customer service.

Product description

The Pipishell Articulating TV wall mount has been designed with strength and versatility in mind. The ultra slim design allows the TV to be folded flat against the wall when pushed back and then from a central position can be extended outwards maintaining its centralised position, tilted and turned in any direction you require.

Will the TV wall mount fit my TV?

First, please check your wall for wood studs, it cannot be used on concrete wall or drywall alone. Anchor needed is for concrete wall installation.

Next, the weight of your TV should be less than 132lbs (60kg).

Then, mounting holes distance on the back of TV must be less than 24" (600mm) horizontally and 16" (400mm) vertically.

Your TV should be at least 37 inch. Otherwise, you will see the bracket.

In addition, please check the area inside the 4 mounting holes to make sure there are not any plugs. Otherwise, the plate may block the plugs.

Finally, please check possible blocked cable/input.

Specifications:

• Fits 37" to 70" flat panel TVs
• Supports TV weight up to 132lbs / 60kg
• Fits VESA mounting hole patterns: 200x100/200x200/300X200/300x300/400x200 400x300/400X400/500x300/600x200/600x400
• Tilt adjusts 12 degrees forward or 3 degrees backward
• Swivel up to 60 degrees
• Extends up to 15.4" and folds 3" from the wall to save space
• Wall mounting studs distance up to 16"
• Rotate 3 degrees for perfect TV level adjustment

Package includes:

• 1x TV wall mount
• 1x Standard mounting hardware
• 1x 3-Axis magnetic bubble level
• 5x Cable ties
• 1x User manual

• ✅ ULTRA STRONG TV WALL BRACKET - Our TV wall mount is constructed from high quality steel materials and fits most 37-70" TVs weighing up to 132lbs like Samsung, Sony, Panasonic, Thomson, Toshiba, Sharp, LG, Philips, JVC etc. Solid and sturdy TV bracket with compatible faceplate that fits VESA patterns from 200x100mm to 600x400mm. Please check the VESA pattern, weight, size of your TV before purchasing.
• ✅ ADJUSTABLE OPTIMAL VIEWING - This premium TV wall mount tilts +10°/-10°, swivels +/-60° (max swivel angle depends on TV size) and level adjusts +/-3° for maximum viewing flexibility. Easily customize your TV watching experience to find the most comfortable and healthiest viewing position.
• ✅SAVE MORE SPACE - Built with dual articulating arms that retract 3 inch from the wall in home position to save space and also extends up to a maximum 15.4 inch from the wall. Saving you some valuable space and adding a nice, neat appearance to your household.
• ✅30 MIN FAST AND EASY INSTALLATION - Comes with all the required mounting hardware needed, a detailed English graphical installation guide that is actually useful (and even funny) which helps you to install this full motion TV wall mount without any hassle.
• ✅AFTER-SALES SERVICE - Our TV wall mount brackets includes an incredible 5 years friendly customer service. If you have any issues whatever, pls feel free to email or call us anytime rain or shine.

Product features

Pipishell - Make your life better!

The Pipishell Heavy-Duty Articulating TV wall mount has been designed with strength and versatility in mind. The ultra slim design allows the TV to be folded flat against the wall when pushed back and then from a central position can be extended outwards maintaining its centralised position, tilted and turned in any direction you require to accommodate normal TV shows, video gaming, fitness programs, video chats and more.

Will the TV wall mount fit my TV?

• First, please check your wall for wood studs, it can’t be used on concrete wall or drywall alone (Need to be installed with the anchor).
• Next, the weight of your TV should be less than 132lbs/60kg. Your TV should be at least 37 inch.
• Then, mounting holes distance on the back of TV must be less than 24" (600mm) horizontally and 16" (400mm) vertically.
• Finally, please check the TV back area inside the 4 mounting holes to make sure there are not any cables outlet. Otherwise, the plate may block the plugs.

Specifications:

• Fits 37" to 70" flat panel TVs, supports TV weight up to 132lbs / 60kg
• Can use with your existing TV. Also use together with SONY/SAMSUNG/VIZIO/LG/Hisense/TCL/SHARP/Toshiba/Panasonic/philips/SKYWORTH and more.
• Fits VESA mounting hole patterns: 200x100/200x200/300X200/300x300/400x200 400x300/400X400/500x300/600x200/600x400 (8"x4"/8"x8"/12"x8"/12"x12"/16"x8"/16"x12"/16"x16"/20"x12"/24"x8"/24"x16")
• Tilt adjusts 10 degrees forward or 10 degrees backward
• Swivel up to 60 degrees meets different viewing needs, rotate 3 degrees for perfect TV level adjustment
• Extends up to 15.4" and folds 3" from the wall to save space, wall mounting studs distance up to 16"

Package includes:

1x TV wall mount / 1x Standard mounting hardware /1x 3-Axis magnetic bubble level / 5x Cable ties / 1x User manual

Product description

Universal TV Mounts



This full motion TV wall bracket includes all features you need. Extend out 16.49" and swivel +/-45° to give any seat in the house the perfect viewing angle. Even above the fireplace, you can tilt it up 5° or down 15° to find the perfect position you want. Also, this mount sits only 2.40" from the wall when retracted in, ideal for those large TV.



More Wall Mounting Options



Concrete wall, 12inch, 16inch wood studs spacing with one piece of wall plate, you have no worries with this mounting system.



Easy Installation



Install it in 3 Easy Steps: Install this TV mounting bracket on the wall – Mount the brackets on TV – Hang the TV and Screw tight! The job is done!



Accessories and More Included



Everything you need out of the box (Hardware Set, HDMI) Labeled hardware set helps get install the mount hassel free. Leveling torpedo included to achieve the perfect angle. Extend the power of your TV with our free high quality 6 feet long HDMI



Customer First, Quality First



Customer first and quality first are our business principle. Our US-Based customer support are always ready to help. If you have any concerns before you purchase or any installation problems, you can feel free to contact us. 10 years Guaranteed!



Your Safety is Our Priority



We have over 20 years TV mounts manufacturing experience. All of our TV brackets are designed, produced and tested with the highest international standards. Trusted by thousands of families and companies who have installed our safe mounts into their spaces.

• 👍【UNIVERSAL DESIGN】This full motion TV mount fits for most of 47-84inch TVs up to 16" Wood Stud with VESA size 200*100mm to 600*400mm available.
• 👍【ADJUSTABLE VIEW COMFORTABLE】This TV bracket with dual articulating arms includes +5° /-15° tilt, ±45°swivel( maximum swivel angle depends on your TV), +/-3° post-installation adjustment allows the perfect TV leveling. All these will make your TV flexibility and better view based on your seat in the room.
• 👍【EASY TO INSTALLATION】Easy installation with detailed instruction and all included hardware in pre-labeled bags(Remarks can help you distinguish which screw you should use). 🌞Warm tips: In order to avoid customer misusing concrete anchors onto wood studs or drywall directly causing any safety issues, we removed concrete anchors from our package. If you need concrete anchors, please contact us to get it for free which be sent from USA.
• 👍【SAVING SPACE】This full motion TV wall bracket can pull out to 16.49 and retract back to 2.40”, which save some valuable space for you and make your house look neat and Max weight 132lbs.
• 👍【PRODUCT INCLUDES】Comes with 6ft HDMI, bubble level, 3 pieces pack of cable ties and all standard mounting hardware, 10-year friendly US-based customer service.

User questions & answers

Question:	Will this work for a 600×200 vesa pattern
Answer:	Dear Amazon customer， Thanks for the interest and contacting our USX MOUNT Products. We are always here and glad to help. Currently this model fits most 47-84" TVs up to 132 LBS, with VESA size available from 200*100mm to 600*400mm. Currently your VESA is 600*200mm，within the rated product range. So long as your TV weight and size is within this range, it will be no problem to fit your TV. If you still have concerns, you can send your FULL TV model number or the clear picture from back side of your TV via email [email protected] or call the Toll Free Number: 800-460-0956 for us to double check. Wish you a great shopping experience! Thank you! Best regards, USX MOUNT Service Team
Question:	What is the return policy on this tv wall mount
Answer:	if its not what need then you can return it
Question:	Are there screws in the kit that are 43-45mm? This is the correct size to mount brackets on the back of my tv
Answer:	Yes they are all there
Question:	Will this item https://www.amazon.com/gp/product/b07cxf452p/ref=ask_ql_qh_dp_hza fit tv tcl series 6 75' vesa 300 vs
Answer:	Dear Leandro， Thanks for the interest and contacting our USX MOUNT Products. We are always here and glad to help. Currently this model fits most 47-84" TVs up to 132 LBS, with VESA size available from 200*100mm to 600*400mm. Currently for your TV, your weight is 78.3lbs, VESA is 300*300mm, within the rated product range. Generally speaking, it will be no problem to fit your 74.5" TCL Series 6 TV. If you still have concerns, you can send the clear picture from back side of your TV via email [email protected] or call the Toll Free Number: 800-460-0956 for us to double check. Wish you a great shopping experience! Thank you! Best regards, USX MOUNT Service Team

• Universal TV Bracket: TV mount fits for most 32"-65" TVs including 32”, 39”, 40”, 42”, 43”, 49”, 50”, 55”, 60", 65", etc. Compatible with SAMSUNG, SONY, LG, VIZIO, TCL, ELEMENT, SCEPTRE, HISENSE, etc. With VESA pattern 75x75, 100x100, 150x150, 200x200, 200x300, 200x400,300x300, 300x400, 400x300, 400x400. Fits wood studs 8"/12"/16", brick and concrete walls(anchors included).
• Unique Height Setting: Wall mount TV bracket with 2 levels height setting design allows you to lower or lift your TV 4" at ease. Always provide you with better viewing experience no matter what kind of TV size you own.
• Upgraded Viewing Experience: TV mounting bracket tilts TV up 3° and down 15° to reduce glare; Swivels TV left or right according to your seat position; ±3°adjustment allows perfect TV leveling; Pull out up to 14" and retract back down to 2.65" for maximum flexibility.
• Effortless Installation: Full motion TV wall mount comes with clear instruction manual and mounting hardware in individual sealing bags to help you properly install the mount. 3-step installation process makes mounting a breeze.
• What You Get: Standard mounting hardware, 6 ft HDMI cable, 3-Axis magnetic bubble level, 3 pieces pack of cable ties, 10 years warranty and friendly customer service. Any question or suggestion for our TV wall mount, please contact us! We can solve it in 24 hours!

Product features

Swivel for Better Position

Swivel up to ±60° to meet your different viewing needs. Rotate your TV to a optimal position according to seat position rather than sit directly in front of the TV.

Tilt for Reducing Glare

Tilts TV 3° up and 15° down to eliminate annoying glare and reduce neck or eye strain for better viewing experience.

Low Profile for Saving Space

Articulating design makes the TV wall mount extend up to 14" and retract down to 2.65" from wall. Customizes your viewing experience and also makes a slim appearance.

Level After Installation

Found your TV is not level? Turn the 4 leveling bolts then correct it with included bubble level. No need to remove your TV from wall. Angle can be adjusted from +4° to -4°.

Product description

Product description

 

Designed for 50-90" TVs

PIXF2 full motion TV wall mount Fits most 50" to 90" flat curved screen TVs and supports TV weight up to 154lbs / 70kg.

 

Compatibility:

This large tv bracket is compatible with, but not limited to the following TV models: LG 86UN8570PUC; Sharp LC-90LE657U; Hisense 65-Inch; TCL 65R635; LG OLED55CXPUA; TCL 55R635; Samsung UN55RU7300FXZA; Samsung QN50Q60TAFXZA; Sony X800H 65 Inch; Sony X800H 75 Inch

 

It Fits VESA mounting hole patterns: 800x400/600x400/500x400/400x400/400x200/400x300/300x200/200x200/200x100( In inches: 32"x16"/24"x16"/24"x16"/16"x16"/16"x8"/16"x12"/12"x8"/8"x8"/8"x4")

 

What type of wall can I install this 90 inch tv mount?

This long arms TV wall mount works on three types of wall: 16" to 24" wood studs, concrete wall and brick walls.

 

What can this tv wall mount 90 inch bring us?

This large tv mount allows ±90° swivel (The actual swivel degree depends on the TV size), ±10° Tilt and ±3° level, which allows you to view TV from multiple seating areas in a room.

• ✨ Full Motion for Immersive Viewing Experience: 29 Inches of long and ultra-strong arms makes this articulating TV wall mount an ideal home for larger TVs 50-90 inch, also with 3.78”pulled against wall to save space. The dual arm tv wall mount maximizes your flat or curved TV's positioning and visibility and allows to view your TV from multiple seating areas in a room.
• 🏷️Multifunctional and Exquisite Design: This extra long arm TV mount is equipped with three pivot points: ±90° swivel, ±10° Tilt and ±3° level, which allow you to view TV from multiple seating areas in a room (max swivel angle depends on TV size). With the supportive and safe end cap and lock design, your TV can firmly stay in its right place without any risks of falling off.
• 💪Universal TV Wall Mount: This full motion TV mount works for TVs with VESA pattern from 200x100mm-800x400mm. It is compatible with most 50-90 inch TVs (maximum weight 154lbs), such as Samsung, LG, Sony, TCL, Vizio, Sharp, Panasonic, Toshiba, Philips, JVC, Thomson and all the other brands as long as VESA is compatible, therefore please check the VESA pattern, weight, size of your TV before purchasing.
• 🛠️ Easy Installation with No Worries: Pipishell large tv wall mount bracket can be mounted on 16" to 24" wood studs, concrete wall and brick walls. This large full extension TV mount also comes with a mounting template, a level gauge and detailed step-by-step installation guidance to help you complete your installation process.
• 📧 Thoughtful Customer Service: Pipishell is dedicated to providing professional customer service before and after sales for 5 warranty years. What you can get are high quality large tv wall mount with swivel and tilting function, sufficient assembly hardware, qucik-responsed and friendly customer service.

Product description

Mounting Dream TV Mount for Most 26-55 Inch TVs, Full Motion TV Wall Mount Bracket with Perfect Center Design on Single Stud Articulating Mount Max VESA 400x400mm up to 77 LBS, MD2413-MX



Specifications:



Fits 26" to 55" LED, LCD, OLED and flat panel TVs.

Supports TV weight up to 77lbs.

Fits VESA mounting hole patterns: 400X400/400x300/400x200/300x300/300X200/200x200/200x100/100x100/75x75 mm ( In inches: 16"X16"/16"x12"/16"x8"/12"x12"/ 12"x8"/8"x8"/8"x4"/4"x4"/3"x3").

Tilt adjusts 15 degrees forward or 5 degrees backward.

Swivel up to 180 degrees.

Extends up to 16.7" and folds 2.7" from the wall to save space.

Single stud installation.

Rotate ±4 degrees for perfect TV level adjustment.



Package includes:



TV Wall Mount, User Manual, Hardware Pack, Bubble level, Bubble Level



Sturdy TV bracket :



Made of heavy-duty aluminum and steel for reliable strength. Technology of robot welding makes whole TV wall bracket unit sturdy and safe.

• TV MOUNT COMPATIBLITY: TV wall mount with perfect center design fits for most of 26-55" TVs up to 77 lbs, and fits VESA 75x75mm – 400x400mm mounting patterns.
• FULL MOTION & SPACE SAVING: TV bracket tilts TV up 5° and down 15°, say goodbye to screen glare. Swivels TV left or right according to your seats position. Pull out to 16.7” and retract back to 2.7”, making your TV alive to move. This full motion tv mount also enables you to mount your TV in the corner.
• EASY INSTALLATION: TV mount with decent instruction and all included hardware in pre-labeled bags. +/-4° post-installation adjustment allows perfect TV leveling. Comes with cable ties and bubble level as gifts. Concrete anchors will be sent per request.
• HEAVY DUTY UNIT: Made of heavy-duty aluminum and steel for reliable strength. Technology of robot welding makes whole TV wall bracket unit sturdy and safe.
• 100% PURCHASE GUARANTEE: US based customer support team answers your pre-purchase and installation questions. Our TV mount is 10-year warranted!

Product features

Easy Installation wall mount -- meet your needs

Full motion TV wall mount comes with Installation instructions, mounting template and all the necessary hardware is provided.

Use our provided socket wrench to easily install wall plate.

Tilting TV Wall Mount- reducing glare

After installing,when you want to pull TV to your desired angle, fasten 2 tilting bolts with Allen key;

The full motion TV mount can tilt +5°/-15°.

Low-profile Full Motion Wall Mount - space saving

2.7" to 16.7" wall distance adjustment for flexible movement and space-saving.

TV Wall Mount - level your TV perfectly

Loosen 2 leveling bolts on the rear of TV plate, turns, adjust to level, and retighten to secure.

The full motion TV mount can level +4°/-4°.

• 30 INCHS LONG ARM TV Mount: Fits most 32"-70" flat/curve TVs like Samsung, Sony, Panasonic, Thomson, TCL, Hisense, Toshiba, Sharp, LG, Philips, JVC etc VESA patterns from 200x100 up to 600x400mm, weighing up to 99lbs
• CORNER TV WALL MOUNT FULL MOTION: Designed with offset wallplate and long arm to allow installation to a corner. Utilize the dead corner space by installing your flat/curve television on the wall.Even 70 inch TVs can be installed at a corner with room to adjust angles.
• Complete Range of Adjustment: Extends, articulates, tilts, swivels, levels and collapses on this long arm full motion TV bracket.it can be adjusted to fit your any rooms and ensure the best viewing angle, cable management is included.
• Durable and Reliable: This long arm TV mount is build with heavy duty carbon steel construction, unsplit wallplate and arm design to support TVs up to 99 lbs, and it is passed 310Lbs loading test.it has wide appaction: home,office,hospital,school，shopping mall,restaurant..
• Easy Fast Installation: This TV bracket comes with pre-set drill hole template and variety of screws and easy to follow instruction manual to accommodate any brand of Television. This TV wall mount can be used in 16" wood stud wall and solid concrete wall.

User questions & answers

Question:	Have a cutout with deep shelf over a fireplace, will this work in a deep inset so I can mount a bigger tv
Answer:	Dear Amanda, Thank you for the interest and contacting us regarding the FORGING MOUNT TV wall mount. We understand and we are glad to help. For your questions, yes this is a long arm tv mount, the MAX extension is 30 inch from wall plate to tv brackets, so if you cutout depth is below 30 inch, so this tv mount will work with a bigger tv. if you have any questions please let us know via email: [email protected]. Thanks! HY Bracket service team
Question:	Any recommendation similar to this that will fit a 24" stud for a sony xbr-65x900F with Vesa hole pitch of 300mmx300mm
Answer:	Dear Customer, First this long arm tv mount is fit 300x300mm vesa hole TV. Second this tv mount is designed to install on 16" wood stud wall, but we have a solution for you, you can attach two lumbers(2"x4",length more than 24") to your 24" stud, then install this tv mount to the lumbers, if you need more help and detail asssembly drawing, please contact us via: [email protected] Thanks! HY Bracket service team
Question:	What side are the outlet/ports on
Answer:	No sure what you mean by outlet.ports. The mount is symmetrical. If there is such as thing as oulet/ports on the mount, they are on both sides, it being symmetrical.
Question:	What are the lengths of each arm? What is the full extension
Answer:	Hello Roger, Thank you for choosing our product(Single stud full motion tv wall mount) The length of back arms is 10.5 inchs and the length of front arm is 7.5 inchs. the full extensions is 18.5 inchs. if you have any other questions please contact us via : [email protected] Thanks! HY bracket service team

Product features

30 inchs long extension TV mount

30 inch Extends

This long arm TV wall mount has a long mounting arm for maximum reach with bigger heavier TVs and screens with bigger diagonals. When you fully extend TV wall mount you can easily swivel your big screen TV up to 180 degrees.

Fully motion Adjustable

Tilt up 5 degrees and tilt down 15 degrees. Swivel left and right on 3 pivot joints (180 degree base swivel and 360 degree arm joints swivel). +/-5 degrees of screen level adjust for maximum viewing flexibility. Provides smooth adjustment for all directions so gives you plentiful opportunities to find the best viewing angle from anywhere in the room.

Corner Installation

Designed with offset wallplate and long arm to allow installation to a corner. Utilize the dead corner space by installing your flat/curve television on the wall.Even 70 inch TVs can be installed at a corner with room to adjust angles.

Product description

Wall mounting is the best way to get the most from your new large TV. Not only will it keep your investment safe, but will drastically enhance your viewing experience. You'd swear Charlie Sheen came over with all the winning you'll be doing once that 4k 75" inch beauty is on the wall.

So how will mounting your TV improve the viewing experience? So glad you asked.

1. Your 86 inch screen will be at eye level

If you set your TV on an entertainment center, the screen is often below the best viewing angle. By mounting, you can hang the TV in the sweet spot, with the middle of the screen lining up with your eye level. That gives you a better picture plus reduces fatigue during your Overwatch gaming marathons. Dibs on Zenyatta.

2. Point the TV almost anywhere

This is the biggest benefit of full motion mounts. By extending from the wall, you have space to swivel the screen to point at any seat. Now you can get the perfect picture while sitting in that comfy recliner you found on the side of the road. Trust me, watching the Fast & Furious movies from your favorite spot enhances the enjoyment tenfold. Man, the Rock is so bad-ass.

If you're feeling wild, you could even point the TV to a different room, like the kitchen. That means catching up on Silicon Valley while pan-searing that delicious bass you caught.

3. Eliminate screen glare

The only thing more annoying than screen glare is Carl clicking his pen at the office all day. If you pick a full motion mount, tilting the screen will lessen or completely eliminate your screen glare issues. Without needing tools, you can tilt the screen down and get the best viewing possible.

Not to mention all the safety improvements putting your TV on the wall gives you. Rather than your flat screen dangerously wavering every time you touch it, you can keep the screen securely connected to the wall and eliminate the risk of a tip-over. Model: EGLF2

• We never skip leg day. Our heavy-gauge steel supports TVs up to 86" or 125 lbs. 75" Samsung? No problem. 85" Vizio? Easy money.
• Pull your TV out 22" away from the wall and point it anywhere in the room with 130º of smooth swivel. Retracts back 2.4" from the wall for the real slim shady look.
• Designed to accommodate almost any VESA pattern, this mount is compatible with all major TV brands including LG, Sony, Vizio, and Samsung.
• Use the included drilling template & extensive hardware pack to get your TV on the wall in under 30 minutes. That'll give you plenty of time to watch Ruth be badass in Ozark before going to bed.
• Add some Echogear in-wall cable management or soundbar mount for that real sexy finish with your EGLF2. Hit a snag? Our product nerds are available 7 days a week to help out.

User questions & answers

Question:	Echogear, how overconfident are you in your weight rating ? my 79" lg weighs in at 125.7 lbs, and i want to use this mount bolted to a floor stand
Answer:	Hi There Lee, While we are confident in our weight rating (it has been tested to hold up to 4x its recommended weight limit), we do not recommend bolting this to a floor stand. This has been tested and is under warrantee for wall mounting only. If you need any suggestions on mounts that will work with your set up, please give our experts a ring at 855-428-2490. Kathryn @ECHOGEAR
Question:	The length betwe bolt holes/mount brackets on my screen measures 27", which exceeds the width of the extensions. Are longer extensions arms available
Answer:	Hello, There are not extensions available, but to get a mount that will work with your TV, just check out our handy dandy mountfinder tool on our site. Or give us a call with the model # of your TV at 855-428-2490. We've got real live product experts standing by 7 days a week til 7pm CST. Kathryn @ECHOGEAR
Question:	I have a samsung model # un60f6300af will this mount work for this tv
Answer:	Hi Gary! Thanks for checking in here. The mack daddy EGLF2 will totally support your Samsung. We're super pumped for this new mount so let us know how it works for ya! Kathryn @ECHOGEAR
Question:	My studs are slightly off-center compared to where i want my tv mounted. is lateral adjustment possible
Answer:	Could not center a 200x200 TV with this mount. Studs were 18" apart and off center about 5". The mount doesn't have any adjustments from the back plate attached to the slotted mounting plates. So basically yes you can move the mount over to reach the slots for the studs, but TV is still 5" off center. If that back plate could slide over, that would help.

Product features

You Can Have It All

Take 'I wish my TV could do that' out of your vocabulary. Now you can adjust your TV for the best view from any seat in the room. Tilt, swivel, and extend until you're tired of tilting, swiveling, and extending. Just sit down already

The Ultimate Extension

No really, 22 inches is a lot of inches. Extend your TV out from the wall with ease, just point your TV exactly where you want to view it from and it will stay perfectly positioned. Unlike that picture you hung the other day.

Just Say No To Glare

Tilt your TV screen forward to reduce glare from lights and windows. You don't need that negativity in your life.

Product description

Specifications:

Fits 26" to 55" flat panel TVs

Supports TV weight up to 99lbs (45kg)

Fits VESA mounting hole patterns: 100x100mm/200x100mm/200x200mm/300X200mm/300x300mm/400x200mm/400x300mm/400X400mm

Low-profile design with a scratch-resistant finish, offers a stylish look and save your space. Tilts downwards from 0° to 8° for enjoy a comfortable view of your show.

Open wall plate enhances cable management options. Click, lock and release offers seamless adjustment, safely and easily place your TV where you want it most.

Wall mounting studs distance up to 16".

Package includes:

1x TV wall mount

1x Standard mounting hardware

1x User manual

• Ultra strong double arms: Articulating TV mount are sophisticated engineered and tested with 4 times load-bearing to eliminate the risk when fully extended. It has a reinforced wall panel to give you confidence of TV installation (max weight 99lbs).
• Universal TV compatibility: TV mount is compatible with 26-55 inch TV with VESA mounting holes from 100x100 - 400x400mm. Please check VESA pattern, weight, size of TV before purchasing. Can be mounted to max 16in wood stud and concrete/brick walls.
• Optimized viewing experience: Eliminate annoying glare with vertical tilt angle ranging from +5 to -12 degree and customize viewing angle with +/-45 degree full motion swiveling left to right and rotates +/-3 degree to enhance viewing experience.
• Save space and long extension: The stable and sturdy TV wall mount allows TV to be closer to the wall at 3.2 inch saving valuable space and extends out 14.9 inch without bending. so you can move your TV into the perfect position when needed.
• Easy installation: Our wall mount is easy to install and includes a full step by step installation guide and all the standard mounting hardware. And comes with 5 years friendly customer service.

Product features

Swivel to Bring You Optimal Viewing Angle

Swivel up to ±45 degrees can meet your different viewing needs. The humanized wider rotation angle allows you to enjoy clear TV video without sitting directly in front of the TV. Even if you just want to lie lazily and comfortably in the soft chair on the corner of the room, you will get the best view by swivel your TV to watching the Game of Thrones.

Slim Design to Save Your Space

With a low profile design that allows TV to be folds 3.2 inch from the wall for a modern look, keeping your environment in harmony. This mount will save you extra space when you want to have a birthday party at room or play games with a few friends sitting in front of the TV at living room.

Extension to Customize Your Viewing Experience

Extends up to 14.9 inch so you can move your TV into the perfect position when needed. When you are in the kitchen to make delicious food, but a little distance from the instructional video of the TV you want to watch, the wall mount can support the TV to make the extension you want.

Tilts to Enjoy Your Video Better

Tilts TV 5° up and 12° down to eliminate glare & reduce neck or eye strain. Whether you want to stand or lie down for watch TV, or when you want to do yoga in a soothing manner or learn to aerobics with video, the adjustable pitch angle can help you achieve these activities comfortably.

Pipishell - Make your life better!

Our TV wall bracket is built to last and comes with a number of useful accessories and all the required hardware you need to make the installation process as simple as possible! As with all our Pipsshell products, this heavy-gauge TV wall mount has high standards, it has been tested to hold 4 times the weight it's rated to based on UL standard.

How can I check if the mount is suitable for my TV?

• First, please check your wall for wood studs. Of course! It can be mounted on concrete wall and brick wall, but you need to use additional anchors when installing. Please pay attention to the wall mounting studs distance is 16 inch maximum.
• Next, the weight of your TV should be less than 99lbs/45kg and your TV should be at least 26 inch.
• Then, please check the VESA pattern, VESA = horizontal × vertical. Mounting holes distance on the back of TV must be less than 16" (400mm) horizontally and 16" (400mm) vertically.
• Finally, please check the TV back area inside the 4 mounting holes to make sure there are not any cables outlet. Otherwise, the plate may block the plugs.

Specifications:

• Fits 26" to 55" flat panel TVs and supports TV weight up to 99lbs / 45kg.
• Can use with your existing TV, also use together with SONY/SAMSUNG/VIZIO/LG/Hisense/TCL/SHARP/Toshiba/Panasonic/philips/SKYWORTH and more.
• Fits VESA mounting hole patterns: 100x100mm/200x100mm/200x200mm/300X200mm/300x300mm/400x200mm/400x300mm/400X400mm ( In inches: 4"x4"/8"x4"/8"x8"/12"x8"/12"x12"/16"x8"/16"x12"/16"x16").
• Tilt adjusts -12 degrees forward or 5 degrees backward. Swivel up to 45 degrees meets different viewing needs. Rotate 3 degrees for perfect TV level adjustment. Extends up to 14.9" and folds 3.2" from the wall to save space. Wall mounting studs distance up to 16".

Package includes:

1x TV wall mount / 1x Standard mounting hardware /1x User manual

Product description

UNIVERSAL DESIGN TV MOUNT

TV wall mounts with strong dual arms fits for most 32-55 inch TVs up to 99 lbs. compatible with VESA (TV mounting hole pattern) from 75 x 75mm to 400 x 400mm, (Wall mount TV bracket specifically it fits VESA 75x75mm 100x100mm 200x100mm 200x150mm 200x200mm 300x200mm 300x300mm 400x200mm 400x300mm 400x400mm) fitting wood studs up to 16 inch center to center.



UPGRADE YOUR VIEWING EXPERIENCE

Full motion TV wall mount makes your viewing more comfortable. Wall mount TV bracket tilts TV backward 5° and forward 15° to reduce glare 45°, swivels and 3° levels adjustment for maximum viewing flexibility TV mounts with dual articulating arms with 15 2 inch extension and 3 inch depth to wall.



HEAVY-DUTY DESIGN FOR STABILITY AND SAFETY

The heavy-duty steel materials with a durable powder-coated finish and 100% welded by automatic robot. The technology of robot welding makes the whole TV mounting bracket unit sturdy and safe.



EASY INSTALLATION

TV mounts with clear instruction mounting template HDMI cable bubble level and all hardware are included in pre-labeled bags for your quick and safe installation.



HIGH-SPEED HDMI CABLE

TV mount package comes with HDMI cable supports 3D Ethernet 1440p and Audio Return conforming to the latest HDMI 1.4 standard.



Questions? Unsatisfied? Suggestions? Contact us. US-based customer support can solve your problems with the TV wall mounts ASAP.



NOTE1: PLEASE DO NOT INSTALL THE TV MOUNT ONTO DRYWALL WITHOUT WOOD STUDS.

NOTE2: PLEASE CONTACT US IF YOU NEED CONCRETE ANCHORS FOR YOUR INSTALLATION.

• 【UNIVERSAL TV MOUNT】 The TV wall mount fits for most 32-55 inch TVs up to 99 lbs., with max VESA of 400mm x 400mm/16" x 16" and 16 inch wood studs spacing. Not perfect? Please check MD2380-24K, MD2380-24 or MD2298 for your best idea.
• 【UPGRADE VIEWING EXPERIENCE】 This full motion TV mount tilts TV up 5° and down 15° to reduce glare, swivels TV left or right according to your seat position. Pulls out to 15. 2 inch and retracts back to 3 inch, making your TV alive to move.
• 【EASY INSTALLATION】 TV wall mounts with clear instruction and hardware in pre-labeled bags. +/-3° post-installation adjustment allows perfect TV leveling after installation. The paper template makes the installation of the wall mount TV bracket easier. The TV mounts with considerable design for Allen key storage.
• 【HEAVY-DUTY UNIT】 TV wall mount swivel and tilt designed with 6 articulating arms. The technology of robot welding makes this wall mount TV bracket sturdy and safe. This full motion TV wall mount has passed UL Test.
• 【US-BASED CUSTOMER SUPPORT】We are glad to answer your pre-purchase and installation questions about TV mounts. Mounting Dream TV wall mounts are NOT FOR DRYWALL INSTALLATION. Concrete anchors will be shipped if needed.

User questions & answers

Question:	What are the dimensions for the part that attaches to the tv
Answer:	The two vertical brackets are approximate 15 1/2 inches long by 1 inch wide. You fasten them to the TV then lift the TV into place. The horizontal 'H' shape piece that you lift you TV onto is approximate 18 inches by 5 1/2 inches. It is a well built easy to mount system I purchased 3 units for all my TV and I'm very happy that I did. I took a photo to upload but there's no place to do that. Then photo was to illustrate that my 55 inch Samsung curved screen is using that horizontal 'H' mount to its fullest extent. The curved screen has no effect on the install
Question:	distance from wall
Answer:	Dear Amazon Customer.Thank you for the interest and contacting us regarding the Mounting Dream Mount. We understand and we're glad to help. The MD2380 retracts to 3" inches flat against the wall, and extends up to 16" inches from the wall.Thank you!
Question:	My apartment has no studs. How can i mount this
Answer:	Answer to your question is this: There are always studs. They may not be wood, but they are there. Use a magnet or "stud" finder to locate them. All they do is find the nails that the drywall is screwed/nailed to. Studs are now made of aluminum which the stud finder won't detect....except for those pesky little nails which still show up! Next, don't make the mistake I made which is all studs are 16" apart. Find them first, if they are 24" you need to buy the extension are to accommodate a 24" stud spread, because this is a great product, but is only for 16" studs.
Question:	What are the base demons ions where you mount it to the wall
Answer:	Dear William.Thank you for the interest and contacting us regarding the Mounting Dream Mount. We understand and we're glad to help. The MD2380 base (wall plate) dimension is (LxH) 17" x 10.25" inches.If you should have any additional questions/concerns, please feel free to contact us again anytime!Thank you!

Product features

FULL MOTION TV MOUNT--TILTING ANGLE ADJUSTMENT

Want to reduce glare from lights？

• Pull TV to your desired angle, then fasten 2 tilting bolts with Allen key.
• This TV mount can tilt your TV forward/ backward to reduce most glare.

FULL MOTION TV MOUNT--EXTEND & RETRACT TV

Want to point your TV exactly where you want it?

• Hold TV’s two sides and extend it out.
• Pull out and retract back TV wall mount for better viewing experience.

FULL MOTION TV MOUNT--SWIVEL ANGLE ADJUSTMENT

Want to get a better view?

• It is easy and quick to swivel your TV with the articulating arms.
• This full motion TV mount can swivel for your special need.

FULL MOTION TV MOUNT--LEVEL AFTER INSTALLATION

Want to level TV anytime?

• Loosen 4 leveling bolts on the rear of the TV plate by maximum 2 turns and re-tighten to secure after adjusting.
• This wall mount TV bracket allows +/-3° leveling after installation.

SAY GOODBYE TO SCREEN GLARE

The TV mount can tilt your TV forward 15° and backward 5° to reduce the glare from light.

EXTENDABLE LIKE LUFFY THE MONKEY

The TV wall mount can fully extend 15.2” from wall to point your TV exactly where you want to view it from.

VIEW YOUR TV FOR MAXIMUM COMFORT

Want to watch movie with your family from any seat in the room? Now you can adjust your wall mount TV bracket left or right 45° for the optimal view.

Product description

Pipishell Full Motion TV wall mount is perfect for mounting in corners, with optimizing extension, tilt, swivel, and rotation movements. It is designed for 23”-55” displays weighting up to 88lbs, with VESA mounting patterns up to 400x400mm. It is a fully articulating mount, which means that it can swivel 90° to either side, tilt from +6°~ -16.6°. Additionally, you can push the display in to the wall so it extend only 2.36” or pull it out to the full 19.68” extension, freely use the full swivel range.



Will this TV wall mount fit my TV?

First, please check your wall for wood studs, it can be used on single wood stud, concrete wall and brick wall, please avoid mounting it on drywall alone. Anchor needed is for concrete wall installation.



Next, make sure your TV weight less than 88lbs(40kgs).



Then, mounting holes distance on the back of TV must be less than 400mm horizontally and 400mm vertically.



Finally, please check the TV back area inside the 4 mounting holes to make sure there are not any plugs. Otherwise, the plate may block the plugs.



Specifications:

1. Fits 23”-55” TVs, supports TV weight up to 88lbs(40kgs).

2. Can use with your existing TVs including Samsung, LG, Sony, TCL, Vizio, Philips, Sharp, Dell, Acer, Asus, HP, BenQ, Hisense, Panasonic, Toshiba and more.

3. Fits VESA mounting hole patterns: Max 400x400mm, Min: 100x100mm.

4. The myriad of angles (tilt up 6° and tilt down 16.6°, left to right 90°) can help your screen adapt to different situations: sitting, standing, working, laying down, avoiding unsightly sun glare, keeping your screen secure, and reducing neck or back strain.

5. The arm collapses flat sitting just 2.36” from the wall for a low profile, and can be extended 19.68” from the wall.



Package included: 1 x TV wall mount / 1 x Standard mounting hardware / 1 x User manual

• 🛠️Height Adjustable TV Brackets: With 3 levels height setting design of tv brackets, you can adjust the height of the TV after it is installed, so you can get the most comfortable viewing position and better viewing experience.
• 🤗Universal Compatibility: This full motion TV mount is suitable for TVs with VESA pattern from 100x100mm-400x400mm. It is compatible with most 23-55 inch TVs, such as Samsung, LG, Sony, TCL, Vizio, Sharp, Panasonic, Toshiba, Philips, JVC, Thomson and all brands as long as VESA compatible. Please check the VESA pattern, weight, size of your TV before purchasing.
• 👉Flexible Viewing Experience: This full motion tv mount can tilt TV +6°~-16.6° to eliminate annoying glare with ± 90 ° horizontal swivel feature to customize your viewing angle from anywhere in the room and rotate ±3 ° to enhance the viewing experience.
• 💪Stable and Reliable Choice - This TV bracket is constructed with premium steel materials, ultra strong arms more sturdy and flexible. It has been stress tested to hold 4 times its weight based on Ul standards. We are so confident in the construction, strength and durability of this wall bracket. It will keep your new TV safe.
• 📧Excellent Customer Service: Pipishell is dedicated to providing professional customer service before and after purchase. What you can get are high quality TV wall mount up to 55 inch, sufficient assembly hardware, effective solutions and friendly customer service.