13 best kanto full motion tv mounts

• FULL MOTION FUNCTIONALITY - The M300 full motion tv wall mount offers a wide range of functionality to maximize your television's capabilities and accommodate your life at home. Its articulating arm allows you to extend your TV 19.6" from the wall, swivel it up to 135 degrees left or right (depending on screen size), and tilt it 10 degrees forward to 2 degrees backward to achieve an optimal viewing angle. The tilt mechanism is easily accessible and uses a spring-loaded lever system that requires zero tools.
• EASY SETUP - Along with mounting hardware for wood stud and concrete walls, the M300 includes a wide selection of bolt and spacer sizes to ensure a proper fit with your TV. An easy-to-follow video is provided to guide you through every step of your installation, while a paper drill template helps to accurately mark your pilot holes. The M300's narrow wall plate also makes it easy to mount your TV to a pillar or close to a corner. NOTE: When pushed back against the wall, your TV will sit 5" to the left or right of the mounting bracket.
• HEAVY-DUTY CONSTRUCTION - Featuring solid steel construction, this heavy-duty articulating TV wall mount can safely support up to 80 pounds, even at full extension. Mount your 26 to 55 inch TV with confidence while enjoying all the flexibility the M300 has to offer.
• ENHANCED LIVING SPACE - Enhance the aesthetic of any household or professional space by freeing up floor area. The M300's minimalist design gives you a spacious and non-crowded living space, while its long-lasting powder coat finish looks great against any wall or surface. Detachable cable management clips are also provided, allowing you to route your power and video cables neatly from the TV back to the wall. No tools are needed in order to tuck your cables out of sight.
• MAXIMUM SUPPORT - With the addition of four TV bracked extensions arms, the M300 is designed to support TVs with VESA sizes: 100x100, 200x100, 200x200, 200x300, 200x400, 300x200, 300x300, 400x200, and 400x400. Simply configure the position of the arms to accommodate your particular mounting pattern.

• Extends from 3 inches to 20 inches from the wall
• Works with almost all VESA patterns (80-800mm horizontal) and (80-450mm vertical)
• Wall plate accommodates standard 16-inch and 24-inch stud spacing
• Tilt adjustment up to 15 degrees
• Full panning motion with heavy-duty wishbone arms
• Extends from 3.5” to 19.3” from the wall
• Fits flat-panel TVs from 37” to 80”

User questions & answers

Question:	Does this mount go straight back, i.e. when push to the wall is it centered on the bracket? Or is it off to one side or the other
Answer:	It has the capability of doing either. the two arms let it go straight back, or off to either side (or straight out)
Question:	What length of hdmi cables are best with this mount
Answer:	I'm using 15ft cables to run behind the wall. 10 ft are not enough. Wouldn't recommend less than 15 if you're planning on running them behind a wall
Question:	Do you think this will work for my 90'' Sharp
Answer:	I don't have a 90 in tv so it is hard to say for certain, but from my experience I can tell you that the mount is as good as you can get without spending a fortune, the install was quite easy had a mount replica on a paper card board and made the holes accordingly and everything that you will need is included that is a great feature of this product, mounting was easy and I would buy kanto again if I where to hang a 90 in tv. I have hung my 65 in UHD tv and I would recommend this product.
Question:	Could I mount this to a wall perpendicular/adjacent to my couch rather than diagonal or across from it? It would need to rotate at least 90 degrees
Answer:	Liz,As some other users have mentioned this will depend on the size of your TV. A larger TV will hit the wall before reaching the full 90 degrees. We did a quick measurement and found that the TV needs to be less than 42" in order for the mount to go completely perpendicular. Our FMC4 mount might be a better solution if you need the TV to rotate the full 90 degrees, it has an adjustable articulating arm that will give you more flexibility than the FMX3 can provide in this type of situation. Here's a link to it on Amazon:http://www.amazon.com/Kanto-FMC4-Adjustable-30-inch-60-inch/dp/B00C1MH7FGHope that helps, if you have any additional questions feel free to contact us at [email protected], thanks

Product features

FITS VESA SIZES TO 800x450

The FMX2 accommodates a wide range of VESA sizes from 75x75 all the way to 800x450. From small flat panel TVs to big screens, this mount gives you the convenience of compatibility so when you invest in a different TV, you won’t have to buy a new mount.

20 INCHES OF EXTENSION

The FMX2’s full reach extends a generous 20” from the wall to accommodate a variety of TV uses from simple viewing, to home exercise, to gaming, and more.

WIDE RANGE OF SWIVEL

Depending on the size of your TV and the amount of extension, you can swivel your TV up to 80° in either direction. Allow your TV to adjust to your lifestyle.

20 DEGREES OF TILT

The tilt mechanism is easily accessible and uses a swing-over lever system that does not require tools. Tip your TV forward 15°, backward 5°, or anywhere in between, and quickly tighten the head in place at your desired viewing angle.

SLEEK CABLE MANAGEMENT

An integrated cable management system allows you to route your power and video cables neatly between the TV and the wall. Keep your cables tidy and out of sight for a clean, organized look.

Product description

The PDC650 TV mount is specifically designed for inner and outer corner installations. Its two independent wall plates can be mounted to adjacent walls, allowing TVs up to 125 pounds to be safely positioned within a corner. Alternatively, turning the wall plates inwards allows for mounting to an outer edge, column or pillar. Depending on screen size and the distance between the wall plates, the articulating arms offer up to 40° of swivel in either direction. Further improve line-of-sight and reduce glare by tilting your TV 15° forward or 3° backward. The PDC650 also includes cable management clips and wall plate covers to ensure a professional looking setup.

• SECURE CORNER MOUNTING - Featuring two independent wall plates, the PDC650 allows for TVs weighing up to 125 pounds to be safely mounted to any corner, column or pillar.
• PAN AND SWIVEL - Swivel the articulating arms up to 40° in either direction to ensure your TV is properly positioned. Note that the range of movement will depend on the size of your TV and the location of the wall plates.
• ANGLED VIEWING - In order to improve line-of-sight with your TV and reduce glare, the VESA compliant TV brackets can be tilted 15° forward and 3° backward.
• TIDY SETUP - Cable management clips are provided to conveniently route your cables, while plastic wall plate covers hide any sign of installation.
• EVERYTHING YOU NEED - The PDC650 comes with a convenient bolt box containing all the lag bolts, anchors, washers and spacers you’ll need to safely mount your TV.

User questions & answers

Question:	Is this the most stable Kanto mount for hanging a 65 inch tv directly in the corner or would a full motion mount be better
Answer:	The top step of the 3 step ladder is 26 1/2 inches high. I don't have the 4 step ladder to measure, but its 4th step should roughly 35 1/4 inches high.
Question:	Will this fit a 65" sony bravia model:xbr65a8h specifically? not a general 65", not a general sony tv, this specifically. thank you
Answer:	22 1/4 inches tall. Great little step stool. Sturdy and looks great.
Question:	Will this work for a vizio px75-g1? it is below the weight limit, but
Answer:	this one is easy as peeling a banana
Question:	This says it can come 21” from the wall but if I put my 70” tv in the corner, the center is 32 inches from the corner — can someone explain
Answer:	the top width is 15" and the bottom width is 17", we have had this step ladder for 3 years and use it almost every day in our kitchen. It is very well made.

Product description

UNIVERSAL DESIGN TV MOUNT

TV wall mounts with strong dual arms fits for most 32-55 inch TVs up to 99 lbs. compatible with VESA (TV mounting hole pattern) from 75 x 75mm to 400 x 400mm, (Wall mount TV bracket specifically it fits VESA 75x75mm 100x100mm 200x100mm 200x150mm 200x200mm 300x200mm 300x300mm 400x200mm 400x300mm 400x400mm) fitting wood studs up to 16 inch center to center.



UPGRADE YOUR VIEWING EXPERIENCE

Full motion TV wall mount makes your viewing more comfortable. Wall mount TV bracket tilts TV backward 5° and forward 15° to reduce glare 45°, swivels and 3° levels adjustment for maximum viewing flexibility TV mounts with dual articulating arms with 15 2 inch extension and 3 inch depth to wall.



HEAVY-DUTY DESIGN FOR STABILITY AND SAFETY

The heavy-duty steel materials with a durable powder-coated finish and 100% welded by automatic robot. The technology of robot welding makes the whole TV mounting bracket unit sturdy and safe.



EASY INSTALLATION

TV mounts with clear instruction mounting template HDMI cable bubble level and all hardware are included in pre-labeled bags for your quick and safe installation.



HIGH-SPEED HDMI CABLE

TV mount package comes with HDMI cable supports 3D Ethernet 1440p and Audio Return conforming to the latest HDMI 1.4 standard.



Questions? Unsatisfied? Suggestions? Contact us. US-based customer support can solve your problems with the TV wall mounts ASAP.



NOTE1: PLEASE DO NOT INSTALL THE TV MOUNT ONTO DRYWALL WITHOUT WOOD STUDS.

NOTE2: PLEASE CONTACT US IF YOU NEED CONCRETE ANCHORS FOR YOUR INSTALLATION.

• 【UNIVERSAL TV MOUNT】 The TV wall mount fits for most 32-55 inch TVs up to 99 lbs., with max VESA of 400mm x 400mm/16" x 16" and 16 inch wood studs spacing. Not perfect? Please check MD2380-24K, MD2380-24 or MD2298 for your best idea.
• 【UPGRADE VIEWING EXPERIENCE】 This full motion TV mount tilts TV up 5° and down 15° to reduce glare, swivels TV left or right according to your seat position. Pulls out to 15. 2 inch and retracts back to 3 inch, making your TV alive to move.
• 【EASY INSTALLATION】 TV wall mounts with clear instruction and hardware in pre-labeled bags. +/-3° post-installation adjustment allows perfect TV leveling after installation. The paper template makes the installation of the wall mount TV bracket easier. The TV mounts with considerable design for Allen key storage.
• 【HEAVY-DUTY UNIT】 TV wall mount swivel and tilt designed with 6 articulating arms. The technology of robot welding makes this wall mount TV bracket sturdy and safe. This full motion TV wall mount has passed UL Test.
• 【US-BASED CUSTOMER SUPPORT】We are glad to answer your pre-purchase and installation questions about TV mounts. Mounting Dream TV wall mounts are NOT FOR DRYWALL INSTALLATION. Concrete anchors will be shipped if needed.

User questions & answers

Question:	What are the dimensions for the part that attaches to the tv
Answer:	The two vertical brackets are approximate 15 1/2 inches long by 1 inch wide. You fasten them to the TV then lift the TV into place. The horizontal 'H' shape piece that you lift you TV onto is approximate 18 inches by 5 1/2 inches. It is a well built easy to mount system I purchased 3 units for all my TV and I'm very happy that I did. I took a photo to upload but there's no place to do that. Then photo was to illustrate that my 55 inch Samsung curved screen is using that horizontal 'H' mount to its fullest extent. The curved screen has no effect on the install
Question:	distance from wall
Answer:	Dear Amazon Customer.Thank you for the interest and contacting us regarding the Mounting Dream Mount. We understand and we're glad to help. The MD2380 retracts to 3" inches flat against the wall, and extends up to 16" inches from the wall.Thank you!
Question:	My apartment has no studs. How can i mount this
Answer:	Answer to your question is this: There are always studs. They may not be wood, but they are there. Use a magnet or "stud" finder to locate them. All they do is find the nails that the drywall is screwed/nailed to. Studs are now made of aluminum which the stud finder won't detect....except for those pesky little nails which still show up! Next, don't make the mistake I made which is all studs are 16" apart. Find them first, if they are 24" you need to buy the extension are to accommodate a 24" stud spread, because this is a great product, but is only for 16" studs.
Question:	What are the base demons ions where you mount it to the wall
Answer:	Dear William.Thank you for the interest and contacting us regarding the Mounting Dream Mount. We understand and we're glad to help. The MD2380 base (wall plate) dimension is (LxH) 17" x 10.25" inches.If you should have any additional questions/concerns, please feel free to contact us again anytime!Thank you!

Product features

FULL MOTION TV MOUNT--TILTING ANGLE ADJUSTMENT

Want to reduce glare from lights？

• Pull TV to your desired angle, then fasten 2 tilting bolts with Allen key.
• This TV mount can tilt your TV forward/ backward to reduce most glare.

FULL MOTION TV MOUNT--EXTEND & RETRACT TV

Want to point your TV exactly where you want it?

• Hold TV’s two sides and extend it out.
• Pull out and retract back TV wall mount for better viewing experience.

FULL MOTION TV MOUNT--SWIVEL ANGLE ADJUSTMENT

Want to get a better view?

• It is easy and quick to swivel your TV with the articulating arms.
• This full motion TV mount can swivel for your special need.

FULL MOTION TV MOUNT--LEVEL AFTER INSTALLATION

Want to level TV anytime?

• Loosen 4 leveling bolts on the rear of the TV plate by maximum 2 turns and re-tighten to secure after adjusting.
• This wall mount TV bracket allows +/-3° leveling after installation.

SAY GOODBYE TO SCREEN GLARE

The TV mount can tilt your TV forward 15° and backward 5° to reduce the glare from light.

EXTENDABLE LIKE LUFFY THE MONKEY

The TV wall mount can fully extend 15.2” from wall to point your TV exactly where you want to view it from.

VIEW YOUR TV FOR MAXIMUM COMFORT

Want to watch movie with your family from any seat in the room? Now you can adjust your wall mount TV bracket left or right 45° for the optimal view.

• HORIZONTAL OFFSET – All PMX mounts feature a segmented design that allows the arm assembly to be easily removed and positioned, independent of the wall plate. This setup makes it easier to center your television, regardless of the location of the studs.
• EASY INSTALLATION – Installing a PMX TV mount is quick and easy. Weighing less than 10 pounds, the wall plate can be installed unassisted. The arm assembly can then be hooked into place before securing it with the provided hardware.
• TOOLLESS TILT – The PMX series features a specially designed tilt mechanism that allows for precise adjustments to be made without the need of tools. Set the tension to allow for finger-tip adjustments, or lock it in place at the desired angle.
• SUPERIOR EXTENSION – This wall mount is made from solid steel and has heavy-duty wishbone arms that allow maximum extension and support, even for larger televisions.
• CONVENIENT BOLT PACK – The PMX700, along with the other TV mounts in the PMX Series, is carefully packaged with all the lag bolts, anchors, washers, and spacers needed for both wood studs and concrete walls.

User questions & answers

Question:	Can this be mounted on three studs ie, are the main horizontal beams wide enuf for 3 x 16 inch separated studs
Answer:	No. It will mount on 2 studs on 16” centers. I mounted a 65” tv on a wall in the corner, so it’s hanging with side pressure also. It’s been hanging there without any problems for about 6 months now.
Question:	This is almost double the price of the kanto pdx series (one of the highest rated mounts on amazon). is it that much better
Answer:	Here are some things the PMX700 has that the PDX680 does not. Tool-less tilt with cam lever to adjust tilt on the fly, 7" more extension, horizontal offset which allows you to place your TV exactly where you need it, a higher weight capacity and larger compatible VESA range. There's more metal in the design which means you won't have any flex, bounce, or sag even with extremely heavy TVs. As of 2018 it's our flagship mount and outperforms the PDX series in nearly every way. Feel free to contact us directly using the support button on our website if you have any additional questions, thanks.
Question:	It says that this only offers -3 of tilt, which doesn't seem like a lot at all. I am mounting over a corner fireplace in a smaller room. Will it work
Answer:	The PMX700 will tilt your TV 12° forwards or 3° backwards, which would be more then enough tilt for above a fireplace. If you have any other questions, please feel free to email us directly through the support button on our website and we'll be happy to help.
Question:	Does this have horizontal leveling abilities in case of post install TV is not level
Answer:	The PMX680 does have horizontal leveling capabilities for any cases that the TV was not installed level. All of our mounts do have some degree of horizontal leveling. Please email Kanto Customer support directly if you have any other questions and we'll be happy to help.

• Ultra-low profile – achieve a minimalist Home theater setup without sacrificing the functionality of a full motion TV mount. The r500’s recessed in-wall design is made to fit securely between 16-inch stud centers. When fully pushed back, Its Articulating arm assembly allows your flat screen TV to sit almost flush with the wall.
• Better viewing experience – use the r500’s Articulating arm to ensure you always have the perfect viewing angle. Extend it out 27. 6. 5 inches and swivel to 90° in either direction, depending on screen size. An accessible tilt mechanism Also allows you to angle your TV 10° forward to further improve line-of-sight, or 5° backwards to reduce glare.
• Safe & secure – mount your TV with confidence. Constructed out of solid steel, the R500 recessed wall mount safely supports 46 to 80-inch flat panel TVs weighing up to 135 pounds. Its adjustable mounting brackets accommodate VESA sizes from 100x100 to 600x400 to ensure a perfect fit with your television.
• Sleek cable management – The recessed mounting box features multiple holes to allow you to easily run wires through your wall, keeping them safe and concealed. To complete your clutter-free setup while maintaining a tidy viewing area, secure your cables to the extension arm with the provided cable management clips.
• Easy installation – the R500 TV mount is carefully packaged with a variety of lag Bolt, washer and spacer sizes to ensure a hassle-free installation. A paper wall template is also provided to help determine where to cut your drywall, while an online, step-by-step installation video helps guide you through the entire installation process.

User questions & answers

Question:	What is the dementions of the wall mount
Answer:	Unit is already installed so the in-wall dimensions are an estimate. They are 14 1/4" wide by 23 1/4" high. Width is adjustable so if the gap between the studs is a bit over or under the usual 14 1/2" it will still fit OK. The flange portion outside the wall is 16 3/16" wide by 25 1/8" high. The skinny brackets that are screwed to the back of the TV are 1" wide by 17 3/4 high.
Question:	How far is the back of the mounted tv from the will surface? comparing with chief thinstall that in only 1.5 inches from wall
Answer:	It depends. I have my TV at an angle so the bottom is flush on the wall and top is about 3". If did not have TV angled It would only be about an inch which is the depth of the mount.
Question:	Is the flange removable to install in new construction
Answer:	No the flange is not removable. Your options are to cut it off with a metal hacksaw or install it as is between the studs then sheetrock over the flanges. As stated in other posts, make sure to paint inside of studs Matt black. There are to openings where studs are exposed. If new construction I would cover with 3" wide painter's tape to prevent dust and make clean up easier.
Question:	Can i mount an apple tv in the box behind the tv
Answer:	No, not enough room when in stowed position.

Product description

This mount does it all. 22” of reach from your wall, combined with swivel and tilt capabilities, lets your TV adjust to you – just the way it should be. The low-profile design means you can tuck it away when you want. With the PS300, you only need a single stud to get it up on the wall, yet still benefit from its many features. Solid steel construction equates to durability and reliability, while the cable management system will make you forget your input wires even existed in the first place. Available in black or white.

• SAFE & SECURE - Supports TVs weighing up to 88 lb, with VESA sizes up to 400x400
• WIDE RANGE OF SWIVEL - Swivel your TV up to 90° in either direction, depending on screen size
• EASY TILT - Tilts +12°/-2° to reduce glare and improve line-of-sight with your TV
• INTEGTATED CABLE MANAGEMENT - Route your cables neatly between your TV and devices
• EVERYTHING YOU NEED - Comes carefully packaged with all the lag bolts, anchors, washers and spacers you need for both wood stud or concrete installations

User questions & answers

Question:	Can this be mounted on a ceiling
Answer:	No, this cannot be mounted to a ceiling. Please email Kanto Living directly through the support button on our website if you have any other questions.

Product features

Easy Tilt

The PS300 allows you to tilt your TV +12° to -2° to reduce glare and find the most comfortable viewing angle. Its tilt mechanism comes pretensioned to allow you to easily tilt your TV. If you require more or less resistance, simply adjust the nuts on the top of the tilt mechanism.

Wide Range of Swivel

With its articulating arms, the PS300 allows you to swivel your TV up to 90° in either direction, depending on the size of your TV.

Integrated Cable Management

Route your cables neatly between your TV and devices for a clean and professional look

Everything You Need

The PS300 comes carefully packaged with all the lag bolts, anchors, washers and spacers you need for both wood stud or concrete installations

Safe & Secure

Supports TVs weighing up to 88 lb, with VESA sizes up to 400x400

• MADE FOR THE OUTDOORS – Assembled with stainless steel mounting hardware, the PDX650G Outdoor TV Mount features a galvanized steel frame designed to withstand rust, as well as a powder-coated finish to protect against the increased wear and tear associated with outdoor use. Mount your TV out on a patio, deck or balcony while enjoying the full range of motion it has to offer.
• BETTER VIEWING EXPERIENCE – Featuring two wishbone arms for maximum stability, this full motion wall mount can extend a remarkable 21.8” from the wall, giving you the freedom to pan and swivel your TV to accommodate a variety of viewing positions. Swivel it up to 80° left and right, depending on screen size, and tilt it 15° forward to further improve line-of-sight. If glare is an issue, the PDX650G can also tilt 3° backwards.
• CLEAN APPEARANCE – The PDX650G comes with magnetic wall plate covers to hide any sign of installation, as well as cable management raceways to keep your viewing area looking tidy. Its low-profile design allows you to push your TV back to sit 2 inches from the wall, while its highly durable powder-coated finish provides a premium look and feel.
• EASY INSTALLATION – A conveniently labeled bolt box provides all the necessary hardware for wood stud and concrete walls, while a precision drill template helps to accurately drill your pilot holes. This template is also designed to catch drill shavings, keeping post-installation cleanup to a minimum. The mount's 22-inch, dual stud wall plate accommodates up to 16" studs, and features multiple lag bolt slots to ensure your TV is properly positioned.
• SAFE & SECURE – Featuring a solid steel frame and 65mm lag bolts, this heavy-duty TV bracket safely supports up to 125 pounds, even at full extension. With today’s flat screen TVs being more susceptible to tipping over, the PDX650G lets you gain peace of mind by keeping your TV out of arm’s reach of children and eliminating any dangers of it falling over.

User questions & answers

Question:	Would this work with a 600x200 vesa pattern
Answer:	Yes it will! Feel free to contact us directly through the support button on our website if you have any other questions and we'll be happy to help.
Question:	How many degrees does it swivel with a 65 inch tv
Answer:	You will be able to get around 50 degrees of swivel with a 65" TV on the PDX650G. Please feel free to email us directly if you have any other questions and we'll be happy to help.
Question:	Does this swing on its own under heavy winds
Answer:	Thanks for your question. The Kanto PDX650 has provisions to adjust Arm Tension but provides no specification regarding use outdoors "under heavy winds." World Wide Stereo is 42 years old and a proud authorized Kanto dealer.
Question:	would it work on sunbrite tv
Answer:	Yes it worked with my Sunbrite TV. I did have to use the supplied spacers to make flush with the TV.

Product description

Full Motion TV Mount

The PDX650 from Kanto is a full motion TV wall mount that allows your flat screen TV to sit 2″ from the wall. Its generous tilt and swivel capabilities are complemented by 21.8” of extension, making it easy to place your TV in the most optimal position. Exceptionally strong yet lightweight enough to make installation a breeze, this TV wall mount will ensure your TV remains safe and secure.

The PDX650 from Kanto is a full motion TV wall mount that allows your flat screen TV to sit a mere 2″ from the wall.



LOW PROFILE DESIGN

With a unique tilt head designed to nestle into the frame, the PDX650 TV wall mount will let you push your flat screen TV within 2” of the wall. The H frame assembly provides maximum access for cable connections.



FITS VESA SIZES TO 600 X 400

With its adjustable bracket arms, the PDX650 accommodates VESA sizes from 100×100 to 600×400.



EXTENDS ALMOST 22 INCHES

Even with its low-profile design the PDX650 can extend almost 22” from the wall, giving you plenty of room for tilting and swivelling your TV, or for reaching out from alcoves.



SUPPORTS 125 POUNDS

With its solid steel construction, this durable TV wall mount is designed and tested to hold up to 125 pounds. Even at maximum weight and full extension, your TV will remain in place with no sag.



SWIVELS 80 DEGREES IN EITHER DIRECTION

The articulating arms allow you to pivot your TV up to 80° in either direction, depending on your TV size, allowing you to achieve the perfect viewing angle.



TILT MECHANISM

The accessible tilt mechanism makes it easy to angle your TV up to 15° forward or 3° backward. Once you’ve found the best viewing angle, tighten the nuts to secure your TV in place.

• Kanto PDX650 Full Motion Black Articulating TV Mount for 37 to 75 Inch TVs
• TV Size 37" - 75" | Max Weight 125 lb (57 kg) | Supports VESA 100Ч100 - 600Ч400 | Extends 2" - 21.8" (5 cm - 55.3 cm)
• BUNDLE INCLUDES: Kanto PDX650 Full Motion Black Articulating TV Mount for 37 to 75 Inch TVs | Beach Camera Universal Screen Cleaner

Product description

Mount your TV with confidence while enjoying all the flexibility this full motion wall mount has to offer. Offering an incredible 31 inches of extension, the PX720's heavy-duty articulating arms allow you to swivel your TV up to 90° in either direction to accommodate a wide range of viewing angles. On-the-fly tilt adjustments can also be made to reduce glare and improve line-of-sight when mounting above eye-level. Along with a drill template and an assortment of hardware for mounting to brick, concrete or wood-studs up to 24 inches apart, this professional-grade TV mounting solution comes with cable management and wall plate covers to ensure a clean and organized setup.

• FULL MOTION DESIGN - Heavy-duty articulating arms allow you to safely extend your TV 31" from the wall and swivel it up to 90° in either direction, depending on screen size. Maintain a perfect viewing angle wherever you’re seated.
• TOOLLESS TILT - An easy-to-use, toolless tilt mechanism allows you to angle your TV up to 15° forward or 3° backward in order to reduce glare and improve line-of-sight when mounting above eye-level. The tilt head can be tensioned to allow for on-the-fly adjustments or to lock your TV in place at the desired angle.
• HASSLE-FREE INSTALLATION - Use the provided drill template to accurately mount your TV to brick, concrete or wood studs up to 24" apart. A carefully organized hardware box is also included with all the lag bolts, anchors, washers and spacers you’ll need for a custom fit installation.
• SAFETY FIRST - The PX720's high-grade steel construction and heavy-duty lag bolts safely support 150 lb., even at full extension. Mount up to a 100" TV without hesitation.
• CLEAN SETUP - In addition to providing a low-profile solution for displaying your TV, the PX720 comes with wall plate covers and cable management raceways to ensure your viewing area remains tidy.

Product description

Mounting your TV in a corner can be a great way to deal with limited wall space or angled seating arrangements. While some full motion mounts achieve this by being installed on near-by studs, the FMC1’s unique 90° wall plate can be mounted squarely in a corner, ensuring a perfectly centered setup with far more flexibility. Suitable for wood stud and concrete walls, the FMC1 features a telescoping support arm that provides adequate space for TVs as large as 60”. It’s also capable of swiveling left and right, allowing your TV to be pushed up against adjacent walls, and tilting forwards and backwards to reduce glare and improve line-of-sight with your screen.

• SUPPORTS 88 POUNDS - Constructed out of steel, the FMC1 supports up to 88 lb (40 kg).
• SIMPLE CORNER INSTALLATION - The FMC1’s 90° wall plate can be easily mounted in the corner of any wood stud or concrete wall.
• TELESCOPING ARM - A telescoping support arm ensures a proper fit for TVs up to 60”.
• SWIVELS LEFT AND RIGHT - Swivel your TV left or right for a better viewing angle, or to place it against adjacent walls.
• 16° OF TILT - The FMC1 tilts +10°/-6° to reduce glare and improve line-of-sight with your TV.

User questions & answers

Question:	Will this fit a 40" Vizio television
Answer:	Yes
Question:	Vesa spec's
Answer:	Yes, VESA is the standard pattern for modern flat panel screens.
Question:	What’s the biggest tv that can be mounted in corner with this mount
Answer:	The largest TV that can be corner mounted is 60". Contact us directly using the support button on our website if you have any additonal questions, thanks.
Question:	Does this mount have to be mounted in a corner or can it be mounted on a flat wall
Answer:	Mine is mounted in the corner since that is what the bracket is made for. You could possibly mount it to flat wall but you would be missing the holding power of the other side of bracket. I wouldn’t recommend that

Product description

The SA21 gives you the ability to view your flat screen TV from the most optimal position. Its durable dual arms are capable of extending up to 20" and swiveling a full 135 Degree left or right, while its easy-to-use tilt mechanism allows for 13 Degree of tilt. Easily mount TVs from 32" to 47" while maintaining a clean appearance with the SA21's integrated cable management system.

• Fits flat panel TVs from 32" to 47"
• Extends up to 20” (50 cm) from the wall
• Pans up to 135 Degree to provide maximum viewing angle
• Easy to reach tilt system provides a +8 Degree/−5 Degree angle
• VESA hole patterns from 100 x 100 to 400 x 400

User questions & answers

Question:	Can this work as a corner mount
Answer:	Brandi, The SA21 could absolutely be used as a corner mount. Mounts with single arms like the SA21 are great for corners as you can get better angles from single arm mounts. I hope that helps, but feel free to contact us directly through our website if you have any other questions.
Question:	Does this mount come with the necessary screws for both the wall and the TV
Answer:	All of our mounts come with the appropriate hardware to install into wood or concrete walls. If you have any other questions, or require additional information please email us directly through the support button on our website and we'll be happy to help.
Question:	Will this fit a 200x300 TV
Answer:	I used this mount for my 32 inch TV and I love it.
Question:	Can this product be mounted on a steel stud wall
Answer:	We can only recommend the installation methods that are in our manual using the provided hardware to install into wood or concrete walls. Metal studs are hollow and do not provide the structure necessary for our lag bolts to grip into. For this type of installation we recommend consulting a professional installer to determine if your wall is able to safely hold the weight of the mount and TV, and how to install correctly. Contact us from the help tab on our website if you have any additional questions, thanks.

Product features

SA21 Full Motion TV Wall Mount

The SA21 gives you the ability to view your flat screen TV from the most optimal position. Its durable dual arms are capable of extending up to 20-inch and swiveling a full 135 degrees left or right, while its easy-to-use tilt mechanism allows for 13 degrees of tilt. Easily mount TVs from 32 to 47 inches while maintaining a clean appearance with the SA21's integrated cable management system.

If you have any questions or concerns about the installation process, don't hesitate to call us on the customer care number.

135 Degrees of Horizontal Motion

With two joining arms, the SA21 is capable of moving 135 degrees, left or right.

20-inch of Reach

The SA21 extends 20-inch from the wall to allow for optimal positioning.

Easy Tilting

The easy-to-use tilting mechanism allows the SA21 to tilt 8 degrees forwards and 5 degrees backwards.

Integrated Cable Management

In order to keep your living space tidy, the SA21 provides multiple points of concealment for your cables.

• IMPROVED VIEWING - Extending 27.6” from the wall, the articulating arm gives you the freedom to pan, swivel and tilt your TV exactly where you want it.
• LOW-PROFILE DESIGN - Achieve an exceptionally low-profile setup by pushing your TV back to sit 1.9” from the wall.
• CLEAN SETUP - Cable management clips are provided to conveniently route your cables, while plastic wall plate covers hide any sign of installation.
• VESA COMPATIBLE - Along with four extension arms for larger TVs, the PS400 ensures compatibility with a wide range of VESA sizes.
• EVERYTHING YOU NEED - Because every installation is unique, a carefully packaged bolt box is provided, containing all the lag bolts, anchors, washers and spacers you’ll need for wood stud and concrete installations.

User questions & answers

Question:	I would like to use these to mount speakers to the wall. Can someone tell me the size of the mounting plate with the wings off. Thank you very much
Answer:	You may be able to find your answer on the specification sheet for this unit. The spec sheet is on the Amazon web page just below technical details.
Question:	does this mount work for curved tvs
Answer:	Melissa,Most curved TV's do not mount any differently than flat TV's so you shouldn't have any issues as long as it's under the weight capacity and has a compatible VESA pattern (bolt pattern). If you wanted to confirm compatibility between our mount and your TV feel free to contact us directly using the support button on our site and pass along the full TV model number, thanks.
Question:	Checking to make sure that when fully retracted that the TV is centered with the wall plate
Answer:	If the mount is pulled fully away from the wall the TV will be centered with the mall mount. If theTV is pushed back close the the wall it will be offset a few inches.
Question:	how many inches long is the piece that is installed on the wall
Answer:	Hi Tanya, The wall plate is 6.7" tall, and 3.5" wide. If you have any other questions, please feel free to message us directly through the support button on our website and we'll be happy to help.
Question:	I realize this states up to a size of 42", but would a 43" TV also be okay to mount on it
Answer:	Thanks for your question. The weight limit specification is 40 lbs. A 43 inch TV will likely fit the vesa pitch but we cannot recommend using it without knowing the weight of the 43 inch TV. World Wide Stereo is 41 years old and a proud authorized Kanto dealer.