13 best satellite tv receivers
Satellite TV receivers, also known as satellite television receivers or satellite set-top boxes, are electronic devices used to receive and decode satellite television signals for viewing on a television set. These receivers play a crucial role in enabling users to access a wide range of television channels and services via satellite broadcasts. Here are some key points about satellite TV receivers:
Signal Reception: Satellite TV receivers are designed to capture signals from communication satellites orbiting the Earth. These signals typically include a variety of television channels, radio stations, and other multimedia content.
Dish Antenna: To receive satellite signals, users need to install a satellite dish antenna on their property, typically on the roof or a suitable outdoor location.The satellite dish collects signals from the satellite and directs them toward the receiver.
Decoding and Descrambling: Satellite TV signals are usually encrypted or scrambled to prevent unauthorized access. The receiver decrypts and descrambles these signals, allowing viewers to watch the content on their television.
Channel Selection: Satellite TV receivers come with a user-friendly interface that allows viewers to browse and select channels. Most receivers come with a remote control for convenient channel switching.
Electronic Program Guide (EPG): Many satellite TV receivers feature an EPG, which provides on-screen listings of current and upcoming programs, making it easy for viewers to schedule recordings or find content of interest.
HD and 4K Support: Modern satellite TV receivers often support high-definition (HD) and 4K Ultra HD resolution, providing viewers with a superior picture quality for compatible televisions.
DVR Functionality: Some satellite TV receivers come with built-in Digital Video Recorder (DVR) functionality. This allows users to record TV shows and movies for later viewing, pause live TV, and even schedule recordings in advance.
Internet Connectivity: Many satellite TV receivers are equipped with internet connectivity features, enabling access to online streaming services, on-demand content, and interactive features.
Conditional Access Modules (CAM): Some satellite TV receivers support CAMs, which are devices that can be inserted into the receiver to decode additional channels or services that may require conditional access cards.
Compatibility: Satellite TV receivers are often compatible with specific satellite providers or services, such as DirecTV, DISH Network, or regional satellite TV providers. Users need to ensure that their receiver is compatible with their chosen satellite service.
Audio and Video Outputs: Receivers typically offer a range of audio and video output options, including HDMI, component, and composite outputs, to connect to a variety of television models.
Installation: Installing a satellite TV receiver and dish antenna typically requires professional installation to ensure proper alignment and signal reception.
In summary, satellite TV receivers are essential components for accessing satellite television services. They receive, decode, and descramble satellite signals, allowing viewers to enjoy a wide range of TV channels and services. The features and capabilities of satellite TV receivers can vary, so it's important to choose one that meets your specific needs and is compatible with your chosen satellite TV provider.
Below you can find our editor's choice of the best satellite tv receivers on the marketProduct description
Note:
Users please select BLIND SCAN, it can scan download all channels. Some, not built-in satellite list can choose to add manually.
Specifications:
Standard: HD DVB-S/S2 + T/T2
Switch protocol:DiSEqC1.0/1.1/1.2/USALS Motor fully support, 13/18V DC @ 400mA MAX,Overload Protection, 0/22K
Video Decode : Supports multiple formats including H.265 10-bit, H.264 and AVS+FHD 1080p 60fps HW encoding
Audio Decode:MPEG1 layer I, MPEG1 layer II, MPEG1 layer III, MPEG2 AAC, MPEG4 HE-AAC,EAC-3
USB:2xUSB 2.0 High Speed Host
Wifi:Support USB Wifi dongle (MTK7601 and RT5370)
Power Supply: Input DC 12V/1.5A
PAL/NTSC: Automatic PAL/NTSC conversion
Channels Number: 6000+ channels TV and Radio programmable
Favorites:16 different favorite groups selection
OSD Language:OSD Multi-language for options(Arabic,Catalan,Czech,Dansk,Deutsch,Eapanol,English,Euskar,Farsi,French,Finnish,Galego,Greek,Hrvatska,Italian,Magyar,Nederlands,Polska,Spanish,Slovakian,Svenska,Portuguese,Russian, Ukrainian,Turkish,Thai and etc.)
EPG:Fully support to 7 days Electronic Program Guide(EPG)
Picture:JPEG,BMP,PNG Supported
OSD Color:128 color/8bit On Screen Display
Channel Search: Supports NIT Search ,Automatic network search for newly added transponders
Channel Edit: Various channel editing function(favorite,move,lock,skip,delete,rename,find,sort)
Parental Ctrl: Parental control for channels
Easy Menu:Plug and Play installation, with an easy to use Menu System
SoftUpgrade: Software upgrades through USB port and RS232 upgrade.
Time Set:Time set by GMT offset automatic and manual,Summer Time support
Timer:5 event timers,off/Once/Daily/Weekly Mode
Subtitle: Support DVB EN300743 and EBU
Teletext: Support DVB ETS300472 by VBI and OSD
Packing
GTMEDIA V7 PLUS satellite receiver, US plug Power Supply, Remote control, HDMI Cable, User Manual, USB Wifi antenna
- ★ 1080P Full HD DVB-S/S2+T/T2 Satellite Receiver Support H.265 HEVC, Built-in Galaxy 19 97W satellite, enables you to enjoy plenty of HD TV programs. Connect the satellite dish correctly, adjust the antenna orientation, Auto-scan or Blind-scan support.
- ★ This FTA satellite receiver comes with a WIFI antenna, it supports USB 3G at full speed, you can watch YouTube, CCcam, Newcam, PowerVu, DRE and Biss, etc, without problem. (Codes are NOT provided)
- ★ 6000+ channels TV and Radio programmable, fully support to 7 days Electronic Program Guide (EPG), NIT Search, Automatic network search for newly added transponders, Various channel editing function(favorite, move, lock, skip, delete, rename, find, sort)
- ★ GT MEDIA V7PLUS satellite decoder Plug and Play installation, with an easy to use Menu System, has 2 * USB ports, connect a USB flash drive, support USB PVR Ready, TIMESHIFT, playback of multimedia files. (USB Disk FAT / FAT32 / NTFS)
- ★V7PLUS FTA Satellite Receiver supports the upgrade, we will constantly improve its function. Please download and upgrade the latest firmware to the device.
User questions & answers
Question: | Cual es la diferencia con el gt media v7s hd |
Answer: | Elpluses mejor por trae el H265 |
Question: | Does this product support encryptions like bisskey, powervue, dre, etc |
Answer: | Yes, go to the Network menu, press 6666 via remote control, the CS protocol will display. Thanks |
Question: | Funcionara en peru |
Answer: | Es receptor funciona muy bn en cualquier territorio del mundo |
Question: | Does this device record to an external drive through the usb ports in the back? (or is a separate pvr required |
Answer: | Yes it does. |
Product features
GT MEDIA V7 PLUS
Free to air Digital Satellite Receiver and Digital Terrestrial Receiver combo TV Converter Box. Integrated lists of the main popular satellites such as Galaxy 19, Eutelsat, Hispasat, etc. It pre-installed YouTube, supports CCcam, Newcam, PowerVu, DRE and Biss, etc. Not only can save 6000 channels TV and Radio programmable but also have 16 different favourite groups selection, automatic PAL/NTSC conversion, Plug and Play.
H.265 1080P Full HD
- H.265 can transmit 720P ordinary HD audio and video with a transmission speed of 1~2Mbps. With the same picture quality and same bit rate, H.265 takes up 50% less storage space than H.264.
EPG
- Fully support to 7 days Electronic Program Guide (EPG).
- Supports NIT Search, Automatic network search for newly added transponders.
- Various channel editing function (favorite, move, lock, skip, delete, rename, find, sort).
PVR
- USB 2.0 for PVR, TIMESHIFT, media files playback.
- Recording one channel, can view another channel under the same TP.
- Support FAT/FAT32/NTFS big capacity hard disk.
Product description
As United States TV was NTSC Format
when you get the Box,if it show on your tv was Black and White screen
Going our TV Box Main menu page>>>System>>AV Setting>TV System;
change the AV Out was NTSC or Auto.
this order was come with USB Wifi antenna,so it can only working wifi function.
the 3G and Lan function was not active.
Package list:
1 * DVB-S2 Receiver
1 * Remote controller (Not including Battery)
1 * RCA cable
1 * USB Wifi Antenna
1 * Power adapter
1 * User manual
Features:
USB 2.0: Embedded Two Host.
Fully comply with DVB-S/S2, MPEG-2/4 H.264 Standard.
Supports single / multiple or blind search satellite search. Automatic PAL / NTSC conversion.
Support DiSEqC 1.0 / 1.1 / 1.2/1.3 (USALS) Motor protocol.
Various channel editing function (favorite, move, lock, skip, delete, rename, find, sort).
Channel Search:Channel Search by automatic, manual and fastest blind scan.
Support teletext/subtitle/multi-language.
Powerful and highly effective 7-day EPG function.
Media Supporting:USB media player to playback the media in USB flash disk or USB HDD or USB card reader with memory card
Favorites Channel:8 different favorite groups selection,Channel edit function including Favourite, Move, Delete, Lock,Skip,Rename
AUTO, 16:9 Pillar Box, 16:9 Pan G Scan, 4:3 Letter Box, 4:3 Pan G Scan, 4:3 Full, 16:9 Wide Screen.
USB 2.0 for PVR Channel Records, TimeShift, software upgrade and media files playback, multimedia playback.
Video output resolution: 480i/576i/480p/576p/720p/1080i/1080P.
Frequency Range: 950MHz-2150MHz.
Sensitivity Level: - 10~ - 81dBm.
H.264 MP#L3(10Mbps).H.264 HP L4.1(25Mbps).
Audio Decoder: AC3,WMA,MP3,AAC (wma,.mp3,m4a).
- 【Built-in Galaxy 19 97W Satellite Channel List】You Need Ready Dish Antenna and LNB to used.And Support Auto Blind search,can Blind Scan your dish Signal Channel.
- 【USB 2.0 High-Speed Host】Media player to playback the media in USB flash disk or USB HDD or USB card reader with memory card, PVR with USB HDD, Time shifting with USB HDD.
- 【Support CS Protocol,Bisskey and PowerVU Function】but without Account and Key code on sale(Account and code Need get it by yourself)
- 【Support IPTV Customer customization Function】You can import your iptv m3u channel list on our receiver,IPTV List name need was "custom_url.m3u"
- 【It not working Dish Network!!!】(US DISH carriers,such as DirecTV at 119.0°W / at 110.0°W)
User questions & answers
Question: | Does yahsat 52 works in usa |
Answer: | No, you can not get it. It is real low in the eastern sky at 52.5E you need to get it on this satellite is below horizon in Mountain City, United States. The EIRP values are for Nashville, Tennessee, United States which EIRP in KU/KA Freq. radiant power. You better stay with Galaxy 19 at 97W. Look EIRP on Internet and it will explain what it means. Need to use a big C-Band dish to bring International programming or 90CM/30" or bigger for KU freq. off set dish to work with Galaxy 19. I told you lot of stuff, you got to stay with 97W location with KOQIT Receiver it will work. |
Question: | Will it Receiver C Band or only ku |
Answer: | ku only but not worth the money we had one and it died in just a few hours replacement died too not worth the hassle |
Question: | Is there a way to increase the audio output level?...even at maximum volume it is much lower than my other sources |
Answer: | Hello dear. our this TV Box not have Audio Amplifier. if the volume was lower,you can add your audio Amplifier on the RCA Output. thank you |
Question: | Can not get a signal |
Answer: | Hello dear. this item was building with Galaxy 19 97W Satellite channel data. if your dish antenna was pick up Galaxy 19 97W Signal. this TV Box can plug and play. |
Product features
Support Dolby AC3 Audio,But Not Support EAC3 / AC3 Plus Audio
When Your Youtube app show "No Valid Information" or "Data Error"
- - on PC, copy the website and open on the Browser, download the latest firmware and save on the USB flash drive,
- - unzip it,
- - connect the USB drive to the device, the USB port,
- - access the "TOOLS" menu, choose "USB Upgrade"
- - start the update with ALL mode.
- This was Digital FTA(Free To Air)Satellite recevier.You need Ready Dish Antenna and LNB to used.(Not Normal Antenna.Not Cable Antenna.)
- This Koqit DVB-S2 Digital Satellite Recevier,Full / Blind Search on Single / Multiple Satellites. Can Auto Blind Scan DVB-S/DVB-S2 Channel.
- Fully comply with DVB-S/S2, MPEG-2/4 H.264 Standard,AC3 Dolby Channel Decoder;
- Support DiSEqC 1.0 / 1.1 / 1.2 (USALS) Motor protocol.
- It can working all over the world FTA Satellite HD/SD Clear FTA Channel.
- But Not working DirecTV Dish network(Such as DirecTV at 119.0°W / at 110.0°W and other...);
Live channel USB Recroding
USB Decode
- PVR: Support;
- USB: PVR with USB HDD, Time shifting with USB HDD;
- Media Supporting: USB media player to playback the media in USB flash disk or USB HDD or USB card reader with memory card
Built-in Galaxy 19 97W Satellite Channel List
Plug and play when your dish device pick up 97W Satellite signal.
Easy to Use
- After plugging all cables of machine in a Correct way, go to the interface of satellite list.
- If there are no satellites you need, don’t worry, just freely choose one sat, correctly set up the LNB Frequency and other parameters.
- Then you can choose the “Blind Scan” on this sat, some free and encrypted channels will show up.
- After scanning, all channels will automatically Save into the channel list
Full HD 1080P H.264 Decoder
- Fully comply with DVB-S/S2, MPEG-2/4 H.264 Standard.
- Video output resolution: 480i/576i/480p/576p/720p/1080i/1080P.
- Compliant with: MPEG-4 part10/MPEG-2 ISO/IEC 13818.
- H.264 MP#L3(10Mbps).H.264 HP L4.1(25Mbps).
Firmware Upgrade Support
- CPU:Montage CS8001-T
- Memory:64X16Mbit DDR2
- Flash:8M Bytes
- Constellation: QPSK, 8PSK, 16APSK.
- Fully DVB Compliiant and Compliant with: MPEG-4 part10/MPEG-2 ISO/IEC 13818.
Internet Video share
- Build-in Youtube app,can watch fascinating youtube video
- If your Youtube app show Date erro.going koqit.com firmware support center Download the latest Firmware upgrade
- or sent us message get newest Firmware update.
Product description
GT MEDIA V7S2X HD Satellite Receiver FTA DVB-S/S2/S2X Full HD 1080pwith USB WiFi Antenna (GT MEDIA V7S updated)
Standard: Fully comply with DVB-S/S2/S2X, AVS+, VCM/ACM/Multi-stream/T2MI, MPEG-2/4
Symbol Rates: DVB-S2X QPSK/8PSK/16APSK/32APSK/64APSK
Video Decode: 1080P main profile@level 4.1 and main10 [email protected],High tier
Audio Decode: MPEG-1/2 Layer 1/2/3, MPEG-2/4 LC-AAC, MPEG-4 HE-AAC, Dolby AC3/AC3+, DRA CH/5.1CH
Aspect Ratio: Auto, 16:9 Pillar box, 4:3 Pan & Scan, 4:3 Letter Box
Automatic PAL/NTSC conversion
5000+ channels TV and Radio programmable
16 different favorite groups selection
OSD Multi-language for options (English, Spanish, French, Russian, Portuguese, Polish, Indonesian, Arabic, Turkish, German, Italian, Persian, Thai)
Supports NIT Search, Automatic network search for newly added transponders
Various channel editing function (favorite, move, lock, skip, delete, rename, find, sort)
Parental control for channels
Recording one channel can view another channel under the same TP
Support FAT/FAT32/NTFS big capacity hard disk
Package list:
1*V7 S2X Satellite Receiver
1*IR Remote Control(Batteries not included)
1*US Power Supply
1*HDMI Cable
1*USB WiFi Antenna
1*User Manual
- V7S2X HD is an upgraded version of V7S HD, mainly add DVB-S2X, BISS auto roll, Full PowerVu, Multi-stream/T2MI, support full-speed USB 4G dongle, other functions are the same.
- Plug and play, built-in many satellite lists, such as Galaxy 19, Astra, Hotbird, Eutelsat, Türksat etc. choose Auto-scan or Blind-scan to search channels. a satellite dish or antenna is necessary, the orientation of satellite dish is very important to receive signal.
- Come with a USB WiFi antenna, plug-in, connect to the wifi, support watching YouTube, CS protocol, CCcam, Newcam Mgcam etc. Paid programs must enter the code (code not provided).
- USB 2.0 for PVR, TIMESHIFT, media files playback, upgrades latest firmware through USB flash drive.
- Please download and upgrade the latest firmware, add a new Mobile Tethering Hotspot and improve Multil-Stream PLSN function.
User questions & answers
Question: | Is it ku band compatible |
Answer: | Yes it is |
Question: | will this work with a outside tv antenna no satellite dish |
Answer: | No. This receiver is used only with a satellite dish antenna. It does not receive off-air TV channels. |
Question: | Have a dish satalite, will this work with their equipment |
Answer: | With the dish, probably. But not with the lnb. You'll need a linear lnb. They're about 11$. |
Question: | Does wifi antenna alone allows you to watch the channels from different satellite or you need a satellite dish |
Answer: | You need either a Ku band or C band antenna with their respective LNBs to point to your desired satellite and then get the free to air cannels and radios |
Product features
GT MEDIA V7S2X FTA Satellite Receiver
---- How to upgrade the latest firmware,
Please follow the steps,
1- on PC, copy the website and open on the Browser, download the latest firmware and save on the USB flash drive,
2- unzip it,
3- connect the USB drive to the device, the USB port,
4- access the "TOOLS" menu, choose "USB UPDATE"
5- start the update with ALL mode.
---- Quick steps to search for satellite channels.
1- access the "INSTALL" menu, choose the satellite list,
2- choose Galaxy for example, press the Blue button (SCAN) by remote control,
3- search for channels with auto scan mode or blind scan mode,
4- automatically save programs.
DVB-S2X
Compared with DVB-S2, DVB-S2X has higher spectrum efficiency, greater access rate, better mobile performance, more robust service capabilities, give you more high-quality satellite channels.
USB WiFi Antenna
- Plug in the USB WiFi Antenna, allow you to connect to the WiFi.
- Support Full speed USB 3/4G dongle.
- New add function: mobile Internet access - "Mobile Tethering Hotsport"
YouTube
Pre-install, connect to the WiFi, allow you to watch more video on YouTube.
Package List
- GT MEDIA V7S2X FTA SATELLITE RECEIVER
- HDMI CABLE
- POWER SUPPLY (US Plug)
- REMOTE CONTROL (batteries not included)
- USB WIFI ANTENNA
- MANUAL
Product description
Designed exclusively for DISH Network satellite TV programming, the Pathway X2 antenna offers a whole new look at automatic satellite TV acquisition. Powered through the DISH receiver, the Pathway X2 requires no separate power cord. Simply activate the receiver through an existing DISH account or subscribe to a new Pay-As-You-Go programming package that doesn?t require any activation fees or 2 year agreements. A unique feature to the Pathway is the ability to point to either Western or Eastern arc satellite orbitals, offering the most programming available. The larger reflector size also provides superior signal performance compared to other automatic portable satellite systems. Lightweight yet rugged, the Pathway X2 antenna offers the fastest and easiest set up. Features 2 coax inputs to allow for multiple receiver hook-up, an easy grip carry handle, and a security eyelet molded into the base so the antenna can be locked up. Includes one 25? coax cable. Stores to 15? x 21?. Weight 16 lbs. Compatible with Carryout tripod mount (sold separately). Not compatible with Carryout ladder mount. Made in the U.S.A. Antenna Directivity - Directional
- Dual Arc technology receives both Western and Eastern arcs for maximum SD/HD DISH programming throughout the US in all weather conditions
- Optimized for 2 TV seamless viewing, receives programming from satellite 72.7 when connected to 2 receivers
- Receives standard and high definition DISH programming and is compatible with DISH pay-as-you-go programming.Clean the reflector cover with a soft cloth, water, and dish soap to avoid scratching the cover
- 100% automatic, set your state and the X2 will do the rest! Powered through the coax, just one wire with no power cable needed
- Includes DISH Wally HD receiver, Single Tuner, RF Remote with Remote Finder, Built in Apps (Netflix)
User questions & answers
Question: | Does it come with the necessary cables |
Answer: | No idea. It is nice & strudy |
Question: | does anyone make a carry bag for this antenna |
Answer: | This is made in the USA by Warp Brothers, a veteran-owned company. It’s a great product. I’ve had mine for almost 9 years and all I do is wash it when it gets dirty. Looks brand new! |
Question: | Do the receivers record |
Answer: | The ribbed side goes up. |
Question: | For people who own this... what is the highest signal strength you've seen for each satellite? Do you lose signal easy in the rain |
Answer: | It is easy to wipe souls up. Since it does not stick hard you can also take it out, wash it and put it back after drying it. |
Product features
Automatic and Simple to Use
The Pathway X2 is 100% automatic and self installs quickly. Just set your state and the X2 will do the rest!
Pathway antennas are powered through the coax cable from the satellite receiver. Just one wire, no power cable needed.
Total Coverage
Pathway X2 accesses all Dish satellites everywhere in the United States. Uses both the Western Arc (110°, 119° and 129°) orbitals and the Eastern Arc (61.5°, 72.7° and 77°) orbitals.
Bundle and Save
The Pathway X2 PA6002R comes bundled with the Dish Wally high definition single-tuner receiver that is perfect for mobile use and supports pay-as-you-go programming.
Technical Specifications
- Satellite Acquisition: Automatic
- Compatible Satellite Providers: Dish
- Dish Satellites: 110°, 119°, 129° or 61.5°, 72.7°, 77°
- Maximum Receiver Compatibility: 2
- Dish Receivers: Solo HD receivers. (Examples: Dish 211z, 211k, 211, 411 and Wally receivers.)
- Stationary Use Only
- Multiple receivers must watch programming from the same satellite
Frequently Asked Questions
Q: What satellite providers and satellites work with the Pathway X2 antenna?
A: The Pathway X2 antenna is exclusively compatible with Dish programming. The antenna can receive programming from Dish eastern or western arcs. Dish eastern arc includes satellites 61.5°, 72°, and 77°; Dish western arc includes satellites 110°, 119°, and 129°.
Q: Does the Pathway X2 antenna automatically toggle between satellites?
A: Yes. As you change the channel, the Pathway X2 antenna will automatically toggle to the corresponding satellite with no manual adjustments.
Q: Can I get HD service with the Pathway X2 antenna?
A: HD programming is available. Keep in mind that in order to receive HD programming, you must have an HDTV as well as an activated HD receiver with an HD programming package (sold separately).
- DVB combo box. 1080P Full HD. GT MEDIA V8 TURBO is a combination of a satellite decoder and a digital terrestrial signal. Soporta DVB-S/S2/S2X + DVB-T/T2 + DVB cable/J.83B, AVS+, VCM/ ACM/ T2-MI, Multi-PLP, HEVC main profile 10 (10bit). Supports 1P Web TV, CCCAM, etc.
- 【Smartcard slot】V8 TURBO is compatible with smartcards such as TIVUSAT, ALBERTIS and BBC Satback. At the same time, reception and viewing of FRANSAT and TNTSAT channels is supported without inserting a smart card. (Smartcard is not included in the accessories)
- 【Multi-room】The "Multi-Room" function of GT MEDIA V8 TURBO can share the smart card channel decoded by V8 TURBO with other receivers in the family, regardless of whether other receivers have a smart card inserted.
- 【ANT-WIFI Booster】The ANT-WIFI booster is included in the accessories. Make sure that the ANT WIFI is connected to the WIFI ANT connector of the unit. This will make the WIFI signal stronger and more stable.
- 【T2MI, Multi-PLP】 Many West African countries broadcast local DVB-T2 programmes to satellites. Watching DVB-T2 programmes via DVB-S features will promote local programmes to some extent. If there is a similar provider or programme in your area, you can be sure to buy a GT MEDIA V8 TURBO unit that can watch local DVB-T2 programmes via satellite signals.
User questions & answers
Question: | Will this box work in usa |
Answer: | Satellite channels can be received with the satellite dish pot. However, the V8 TURBO does not support ATSC, so it cannot be used in the USA with digital terrestrial signals. |
Question: | Does it has peruvian channels and bein sports |
Answer: | This depends on the signal you receive. |
Question: | Will it convert digital to analog in the USA |
Answer: | The V8 TURBO only supports DVB-T/T2, not ATSC, so it cannot be used in the US with digital terrestrial signals. |
Product features
Striking Multi-Room Function
About Multi-Room:
Function introduction: With the "Multi-Room" function of GT MEDIA V8 TURBO, the smart card channel decoded by V8 TURBO can be shared to other receivers, regardless of whether other receivers have a smart card inserted.
Introduction to function usage:
1. Open the "Multi-Room" function of V8 TURBO, in this path: "Network" - "Multi-Room" - "Mode", select "Server" - click "Apply"
2. Then fill in the "account name, service address, password" in the "Multi-Room" application page of V8 TURBO into the "CS Protocol" in other receivers.
CA CARD SLOT
- 1. V8 TURBO has a smart card slot, which supports direct insertion of a smart card. Currently only supports Tivusat, Albertis and BBC Satback, and subsequent firmware upgrades will support more smart cards.
- 2. V8 TURBO also supports receiving and watching the FRANSAT smart card channel of 5.0°W satellite and the TNTSAT smart card channel of 19.2°E satellite without inserting a smart card.
- (Smart card is not included in accessories)
ANT-WiFi : WiFi Signal Booster
- 1. The accessories are equipped with ANT-WIFI, WiFi signal booster.
- 2. V8 TURBO can not only connect to the network through the wired network port, but also through the built-in WIFI. And ANT-WIFI can optimize and improve the network connected through WIFI, thereby making the network signal stronger and watching the channel more stable.
Full HD 1080P & H.265 & 10bit
- 1. V8 TURBO supports up to Full HD 1080P resolution.
- 2. V8 TURBO supports HEVC H.265 decoding. The H.265 standard is designed to transmit higher-quality network videos under limited bandwidth, and only half of the original bandwidth can be used to play videos of the same quality. Save more bandwidth and capacity on the basis of the same video quality.
- 3. V8 TURBO uses 10bit video encoding. The color level of each color channel has been increased from 256 levels of 8bit to 1024 levels, and the screen colors will be more delicate and the picture quality will be more refined.
PVR
After V8 TURBO is inserted into the U disk, it supports PVR recording. And it supports to watch other channels under the same frequency while recording a program.
AUTO BISS KEY
When V8 TURBO is connected to the network, it supports automatic acquisition of KEY, no need for users to search and import manually.
Product description
Highlight:
1.Measurements of DVB-S/S2/S2X signals, H.264 Hardware decoding;
2.Digital satellite finder meter for quick setup of satellite dishes,
3.3.5 Inch High Definition LCD Screen,
4. Li-Ion battery (7.4 V /3000 mAh) for up to 4-hour operating time.
5.Support AV in and AV/HDMI out function,
6.Support 13V / 18V / LOCK status panel LED display directly,
7.Support for DiSEqC1.0/1.1/1.2/USALSand 22 kHz Tone
8. LNB short circuit protection
9.Support battery power display
Accessories:
1 × Digital satellite meter,
1 × Adapter,
1 × AV cable,
1 × Car charger cable,
1 × Carrying bag 8.strap of carrying bag,
1 × User Manual
Standard:
System capabilities: DVB-S/S2/S2X system standard:ETS 302 307
LNB Input:
Connector: F type, male
Frequency range: 950MHZ-2150MHZ
Input Impedance: 75Ω
Input Signal level: -65dBm~-25dBm(average power)
Active Ant Power: 13/18V DC @ 400mA MAX,Overload Protection
DiSEqC: DiSEqC1.0/1.1/1.2/USALS Motor fully support
LNB switch control: 22K
Demodulator:
Front end: QPSK, 8PSK
Symbol rate: 2Mbps~45Mbps
SCPC and MCPC Capable: Yes
Spectral inversion: Auto conversion
Sortware Features:
OSD Language: OSD Multi-language for options (English\ German\ French\ Portuguese\ Spanish\ Italian\ Russian\ Turkish\ Polish\ Arabic \ Farsi\ Espanol\ Deutsch)
Channel Search: Channel search in automatic, manual and network search
Easy Menu: Plug and Play installation, with an easy to use Menu System
PAL/NTSC: Automatic PAL/NTSC conversion, and 4:3 or 16:9 display form
SoftUpgrade: Software upgrade through USB
- 🥰【3.5-inch LCD screen】The newly upgraded golden version of the V8 satellite finder supports DVB-S / S2 / S2X signal measurement, H.264 multi-standard demodulation and decoding. The V8 satellite finder has a 3.5-inch LCD color screen and a 16-bit OSD with anti-flicker function. It can watch satellite channels in real time and view the channel list list. It is easier and more intuitive to view satellite signals and quickly configure satellite antennas.
- 🥰【Search all satellites】SAT digital locator. Supports complete satellite selection and fast blind scan. Built-in part of the European satellite list, you can directly select search. It also supports users to manually add satellite lists to quickly search for satellites that users want to locate. Supports DiSEqC1.0 / 1.1 / 1.2 / USALS and 22 kHz tones.
- 🥰【High performance】 Lithium-ion 3000mA battery can work normally for up to 4 hours. Support battery power display. Blinking red means charging, and steady green means it is fully charged. Support LNB short-circuit protection, safe and secure to use.
- 🥰【Beginners are also suitable】V8 FINDER METER is a useful outdoor signal detector for TV satellite antennas, suitable for the adjustment and installation of satellite parabolic pans. When searching for satellites, a beep sounds for signal prompts. The stronger the signal, the quicker the sound. If you have any questions about operation, please feel free to contact me.
- 🥰【Professional after-sales service】GTmedia official shop, providing professional after-sales service. If you have any questions, please contact me.
User questions & answers
Question: | Will this work to find and align to eutelsat 9b (AFN |
Answer: | Yes,it is work with it. |
Question: | Can this work in Ghana? Please need your reply |
Answer: | Hi, of course you can, no matter where you are, as long as the satellite is in C-band or KU-band. |
Question: | Can it work in Nigeria |
Answer: | yes sure its work |
Question: | does this work in the usa? I order another and it only worked in Europe...i need to point a dish network sat...is this the item |
Answer: | It works very well in the USA. Start at dishfinder.com to identify the longitudes of the satellites you want. Add a couple on each side. Enter the menu system of the V8. Delete as many satellites from the arc as you want to enter; then enter the names and longitudes of the satellites you want. Since dish network uses a scrambled signal you will not see a picture on the display, but you will capture signal strength, and be able to lock it in. |
Product description
Standard: Fully comply with DVB-S/S2/S2X + DVB-T/T2, VCM/ACM/Multi-stream/T2MI, Multi-PLP, MPEG-2/4 H.265 HEVC main 10
Symbol Rates: DVB-S2X QPSK/8PSK/16APSK/32APSK/64APSK
LNB Power: DiSEqC1.0/1.1/1.2/USALS Motor fully support, Unicable, 13/18V DC @ 400mA MAX, 22KHz±0.4KHz(0.6V±0.2V)tone
Video Decode: HEVC main @level 4.1 and main10 @L4.1, High tier MPEG-2 MP@ML H.264 BP, MP&HP@L3/L4.1/L4.2
Audio Decode: MPEG-1/2 Layer 1/2/3, MPEG-2/4 LC-AAC, MPEG-4 HE-AAC, Dolby AC3/AC3+, DRA CH/5.1CH
Aspect Ratio: Auto, 16:9 Pillar box, 4:3 Pan & Scan, 4:3 Letter Box
Automatic PAL/NTSC conversion
6000 channels TV and Radio programmable
16 different favorite groups selection
OSD Multi-language for options (English, Spanish, French, Russian, Portuguese, Polish, Indonesian, Arabic, Turkish, German, Italian, Persian, Thai)
Supports NIT Search, Automatic network search for newly added transponders
Various channel editing function (favorite, move, lock, skip, delete, rename, find, sort)
Parental control for channels
Recording one channel can view another channel under the same TP
Support FAT/FAT32/NTFS big capacity hard disk
Package list:
1* V7 Pro FTA Satellite Receiver
1* IR Remote Control (Batteries not included)
1* US plug Power Supply
1* HDMI Cable
1* WiFi Antenna
1* User Manual
- V7 PRO FTA Satellite Receiver, mainly add DVB-S/S2/S2X, HEVC main 10 (10bit), BISS auto roll, Full PowerVu, VCM/ACM/Multi-stream/T2MI, Multi-PLP, Smart card slot, support full-speed USB 4G dongle.
- Come with a wifi antenna, plug-in, connect to the wifi, support watching YouTube, CS protocol, CCcam, Newcam Mgcam etc. Paid programs must enter the code (code not provided).
- Plug and play, built-in many satellite lists, such as Galaxy 19, Astra, Hotbird, Eutelsat, Türksat etc. choose Auto-scan or Blind-scan to search channels. a satellite dish or antenna is necessary, the orientation of satellite dish is very important to receive signal.
- USB 2.0 for TIMESHIFT TV program, PVR video recording, multimedia playback image (JPG, BMP, PNG, GIF), audio (WMA, MP3), movies (TS, Mkv, MP4, Avi, Flv, f4v, m2ts, MOV, 3gp) and USB firmware update.
- V7PRO FTA satellite receiver support upgrades the latest firmware, fix errors and improve device performance, please contact seller for the website or scan the device information.
User questions & answers
Question: | Will this box work in usa fta |
Answer: | Yes if u change the sat list |
Product features
V7 PRO FTA Satellite Receiver
--- How to upgrade the latest firmware,
Please follow the steps,
1- on PC, copy the website and open on the Browser, download the latest firmware and save on the USB flash drive,
2- unzip it,
3- connect the USB drive to the device, the USB port,
4- access the "TOOLS" menu, choose "USB UPDATE"
5- start the update with ALL mode.
--- Quick steps to search for satellite channels.
1- access the "INSTALL" menu, choose the satellite list,
2- choose Galaxy, for example, press the Blue button (SCAN) by remote control,
3- search for channels with auto scan mode or blind scan mode,
4- automatically save programs.
CA CARD Slot
How to insert the smartcard,
with the chip upward, gently insert it into the CA slot, the machine will show "card in", go to the "Tools" menu, access the "Condition Access" submenu to check the card informatio.
PVR recording
- USB 2.0 for TIMESHIFT TV program, PVR video recording, multimedia playback image, audio, movies.
- Support FAT/FAT32/NTFS big capacity hard disk.
- Recording one channel, can view another channel under the same TP.
EPG
- Fully support to 7 days Electronic Program Guide(EPG).
- 16 different favorite groups selection.
Package List
- GT MEDIA V7 PRO FTA SATELLITE RECEIVER
- HDMI CABLE
- POWER SUPPLY (US Plug)
- REMOTE CONTROL (batteries not included)
- USB WIFI ANTENNA
- MANUAL
Product description
Accessories:
1 * Gift Box,
1 * Adapter,
1 * IR remote control,
1 * HDMI Cable,
1 * User Manual
Highlight:
1.DVB-S/S2/S2X,DVB+T/T2/Cable(J83.A/B/C)/ISDBT.
2.Support Full PowerVu, DRE &Biss key
3.Support FULL HD 1080P (AVS+ ,H.265)
4. Support DLNA, SAT To IP
5.Support Built-in WIFI module, Ethernet,Full speed 3G usb dongle
6.Support IP TV, Youtube, Youporn, Redtube; Weather forecast, Jamendo, Yahoo news, Picture etc.
7.Support Network Sharing Cc cam, New cam, Mgcam.
Sortware Features:
Standard: Fully comply with DVB-S/S2 (SCPC and MCPC receivable from C/Ku band satellite), DVB-T/ T2/ Cable (J83.A/B/C)/ ISDBT, MPEG-2/ 4 H.265 Standard
Switch protocol: DiSEqC1.0/1.1/1.2/USALS Motor fully support, 13/18V DC @ 450mA MAX, Overload Protection, 0/22K
Channels Number: 10000 channels TV and Radio programmable
Favorites: 31 different favorite groups selection
OSD Language: OSD Multi-language for options
EPG: Fully support to 7 days Electronic Program Guide(EPG)
Channel Search: Supports NIT Search ,Automatic network search for newly added transponders
Channel Edit: Various channel editing function (favorite, move, lock, skip, delete, rename, find, sort)
Parental Ctrl: Parental control for channels
Easy Menu: Plug and Play installation, with an easy to use Menu System
PAL/ NTSC: Automatic PAL/ NTSC conversion
SoftUpgrade: Software upgrades through USB port, or RS232 for PC upgrade.
Channel: Recording one channel, can view another channel under the same TP, Various channel editing function (favorite, move, lock, skip, delete, rename, find, sort)
Teletext: support DVB ETS300472 by VBI and OSD
USB 2.0: Support FAT/ FAT32 big capacity hard disk
PVR Option: USB 2.0 for PVR, TIMESHIFT, media files playback
- 😉【DVB-S2 & T2 & Kabel & ISDB-T Four-in-One】 HDTV standard DVB-T / T2 / ISDBT, DVB-S / S2 / S2X, DVB-Cable (High efficiency video encoding).
- 😉【Built-in WIFI】 V8 PRO2 has a built-in WIFI module, it is not necessary to buy the WIFI antenna separately. Support for shared networks CC cam, New cam, Mgcam, IP TV, Youtube. Supports Ethernet, 3G full speed USB dongle. Let you experience the perfect channel viewing experience.
- 😉【HD TV / H.264 / HEVC H.265 / AVS. +】 Full HD 1080P TV receiver, which supports multiple audio formats. The picture signal is output via HDMI (up to 1080p). Plug and play installation, easy-to-use menu system. Up to 10,000 channels or broadcast programs can be programmed.
- 😉【DVB-S / S2 / S2X】 Can be used as DVB-S / S2 / S2X, decode unencrypted satellite signals and watch programs, add CC CAM and other accounts to watch encrypted TV channels, it is used together with satellite antennas. Support for Full PowerVu, DRE and Biss keys. Unicable support, XML EPG and Satellite EPG.
- 😉【Conversion PAL / NTSC Conversion】 Automatic PAL / NTSC conversion. it has an aspect ratio of 16: 9, box pillars, 4: 3 Pan & Scan and 4: 3 mailbox.
User questions & answers
Question: | como se actualisa |
Answer: | Debes ingresar a la página oficial de gt media y descargar el archivo en una USB en Youtube hay varios tutoriales |
Question: | Funciona en colombia? actualmente tengo funcionando un dec (az america silver en configuracion hacia amazonas) asi mismo son free los canales |
Answer: | funciona perfecto con Amazonas y con star one |
Question: | Sirve para cuba |
Answer: | Saludos estimado El dispositivo sirve para toda America, hay que utilizar una antena satelital apuntada a undatelite en este caso al satelite Amazonas o Hispasat que está presente para America más una IKS que se encuentra de venta por internet, de no tener IKS se puede recuperar solo los canales gratuitos |
Question: | El decodificador. gt media v8 pro2, es compatible en chile para satelite amazonas |
Answer: | Si claro, es compatible para toda America latina yo lo uso en Colombia y va perfecto es la mejor opción ya que trae el códec h265 donde están migrando los canales |
Product description
Please be advised some of the receiver may say re-manufactured but all receiver come straight from Dish.
- SOME ITEMS ARE NEW FACTORY REMAN DISH NETWORK CERTIFIED*
User questions & answers
Question: | is this the same thing as a vip211k |
Answer: | This product do not support PC programming by user. |
Question: | Is remote rf? or is it wifi |
Answer: | yes, us plug for united states |
Question: | Would this work with a 15 year old tv |
Answer: | there is two ways 1.connection via HDMI cable or RCA cable 2. use WIFI dongle to connect wifi |
Question: | Does this reciever work with a winegard carryout |
Answer: | Yes, it does. It takes about two minutes to scan Galaxy 19, 97W in the US. |
Product description
Description:
Item type:Smart Digital Satellite TV Receiver DVB-T2+DVB-S2
Hardware:
CPU: Montage VT6000
ME-MOry: 32X16Mbit DDR2 f #400MHz, Flash: 4M bytes
Demodulator Type: M88DM6000
S2 TUNER: M88TS2022
T2 TUNER: MaxLinear MXL 608
Front Panel: USB 2.0 Embedded One Host,
4-digit LED display on front panel
Red LED Standby,green LED Lock
Panel KEY, POWER, CH+ ,CH-
Rear Panel: S2 LNB IN input connector IEC60169-2
T2 ANT input connector IEC-162-2(IEC Female)
HDMI V1.3, RCA CVBS AL AR Connector x1
Ypbpr RCAx1, Coaxial x1, Power AC100~240V 50Hz/60Hz
DVB-T2 Demodulation :
Terrisal Receiver StandardDVB-T2/T(EN_302755 V1.3.1/EN 300744)
Input RF Frequency 48~866MHZ, Bandwidth6MHz,7MHz,8MHz
Constellation QPSK 16-QAM 64-QAM and 256-QAM
FEC 1/2, 3/5,2/3, 3/4,4/5,5/6
Guard Interval1/128 1/32 1/16 19/256 1/8 19/128 1/4
FFT Mode 2K/ 8K/32K, Support Single and multiple PLPS
Input level -83~ -5dBm
DVB-S2 Channel Decoder :
Frequency Range 950MHz-2150MHz, Sensitivity Level - 10~ - 81dBm
Aspect Mode: Auto / 4:3LetterBox / 4:3PanScan / 16:9
Video Output Resolution: 480i/576i/480p/576p/720p/1080i/1080P
Support Audio Description (Thailand Standard)
Support Teletext, Subtitle
Support Find / Zoom
Support Parental Lock
Support Software Upgrade by OTA/USB
USB 2.0 Host Support (Time Shift, PVR, MP3 Player & Picture Viewer Media Player)
AAC 5.1
Powerful Multimedia Features
Media Codec mpeg2, m2ts, ts, avi, mkv, asf, 3g2, 3gp, mp4, mov, flv, f4v, vob, dvix
Audio Codec wav, mp3
Photo Codec jpeg, gif, bmp, png
Package Include:
1x Smart Digital Satellite TV Receiver DVB-T2+DVB-S2
Note:
The colors deviation might differ due to different monitor settings.
- Fully DVB Compliant and H.264/MPEG?2/MPEG?4/AVS.
- Support Full / Blind Search on Single / Multiple Satellites.
- Support Auto / Manual Search on Terrestrial Network.
- Support DiSEqC 1.0 / 1.1 / 1.2 / USALS / Unicable.
- Powerful Service Control by Favorites, Lock, Skip, Move, Rename & Delete.
Product description
Highlights
1. DVB-S/S2/S2X, DVB+T/T2/ISDB-T/Cable(J83.A/C)/ATSC-C(J83.B). Support DLNA, SAT to IP.
2. Support Multi-format 4K HD display and video decoder, Dual-core MIPS74Kf processor.
3. Time set by GMT offset automatic and manual, summer time support. 8 event timers, Off/Once/Daily Mode.
4. Can switch to other channel while recording the channel. Various channel editing functions: favorite(32 different groups’ selection), move, lock, skip, delete, rename, find and sort.
6. Can open STB to enter play auto standby, also support regional weather.
7. Software upgrades: USB port or FTP upgrade.
Specifications
Multi-core CPU architecture: MIPS 74Kf core operating frequency up to 1GHz, 16KB I-cache, 16KB D-cache and 1 Register File
CPU: Ali M2662
Flash: 64MB SPI
DDR3: 4Gb RAM(128M*16*2)
Sound Mode: Left/ Right/ Stereo/ Mono
Power Supply: AC100V~250V, 50/60Hz
Power Consumption: 12W in operation, ≦1W standby mode
Hardware Specifications
Panel Display: 8-digit white LED display, with multiple function indicators
LED Indicator: Power ON: Green; Standby: Red
Rear Panel: ANT IN(EC-type IEC169-2 Female), LNB IN(Frequency Range 950MHz to 2150MHz), HD OUT(HDMI2.0, up to 4kx2kp50/60output ), SCART OUT, 1*Coaxial(RCA: black), 1*USB2.0, 1*RJ45(For 10M/100M MAC), 1*CA card slot, DC IN(DC12V/1.5A)
Software Specifications
Standard: Fully comply with DVB-S/S2/S2X(SCPC and MCPC receivable from C/Ku band satellite), DVB-T/T2/Cable(J83.A/B/C)/ISDBT, MPEG-2/4 H.265 Standard
OSD Language: English, French, German, Italian, Spanish,Portuguese, Russian, Turkish, Polish, Arabic, Persian, Thai, Vietnam, Czech, Armenian,Georgian, Ukrainian, Albanian, Hungary, Malay, Indonesian, Dansk, Greek, Serbian
Accessories
1x V8 UHD Satellite Receiver
1x Adapter
1x IR Remote Control
1x HDMI Cable
1x Use Manual
- [4k UHD Display and Decoder] Fully comply with DVB-S/S2/S2X/DVB-T/T2/Cable (J83.A/B/C)/ISDBT, built-in 2.4G WIFI modules, supports Ethernet and IEEE 802.1.1b/g/n. V8 UHD satellite receiver supports full powerVU, DRE&Biss key.
- [CA Smart Card Reader and Multi-room] allows you to share your CA card with other receivers on the same network, which means that if you insert one CA card into our satellite receiver, then the receiver in your other rooms can also use the card at the same time, but they need to be on the same network.
- [DLNA and Sat to IP] DLNA function supports transmitting the video in your phone and tablet on a large TV screen. Sat to IP function supports satellite TV program transmit to your mobile phone, tablet and other device via GTShare.
- [Multiple Chanel Options] There is 6000+ channels TV and Radio programmable for you. You can add your favorite or move channel with this receiver, which equipped various channel editing functions. Supports parent control and EPG. V8 UHD satellite receiver not only supports automatic network search for newly added transponders but also support NIT search for DVB-T/Cable.
- [Dual-core MIPS74Kf processors] Support Multi-format ultra-high definition video decoder. V8 UHD satellite receiver supports regional weather display, timer and time setting. You can get software upgrading through USB port or FTP upgrade. USB ports also support PVR and media files playback. You can switch to any other channels while recording the channel.
User questions & answers
Question: | Will it Receiver C Band or only ku |
Answer: | yes, both bands with no problem thanks. |
Question: | Can this receiver transmit the tv signal to a remote projector via wifi network |
Answer: | Hi, dear. There are two ways to transmit the tv signal to a remote projector. 1. If your projector is an android projector, you can download our GTShare app and transmit the tv signal to your remote projector via wifi network. 2. You can connect your projector to this receiver via HDMI cable to transmit the tv signal to a remote projector. Welcome to contact us if there are any other questions. |
Product description
DIRECTV H24 High Definition 3-D Ready Receiver DIRECTVs H24 receiver is small, fast, and smart. This HD receiver works with all DIRECTV systems including legacy dish systems. It works quickly and quietly and is excellent for bedroom installations where a small receiver is desired. The H24 is designed for wall mounting without a separate kit and is RF-remote capable without an external antenna. Features: This receiver is NEW Energy star Compliant Wall Mountable Get access to over 265 channels of movies, shows, and sports Add wireless ethernet support for services like On Demand by purchasing the DIRECTV HPTurbo High definition (mpeg-2, mpeg-4) and standard definition (mpeg-2) enabled. View the best in both HD and SD programming. Integrated Deca technology Parental controls/locks: Enjoy peace of mind over what your children are watching by locking out objectionable programming. DECA Compatible Multi-Room Viewing Compatible MRV Compatible H24 and HR24s installed on systems that DO NOT have a SWiM Switch require B-Band Converters 3D Ready Receiver See whos calling with on-screen Caller ID. View and log Caller ID info provided by your local phone company. Faster guide surfing, and channel changing DIRECTV requires a 24 month (lease) commitment on all activated receivers H24 Dimensions: Width 12.5" Height 1.8" Depth 9.4" Weight 6 lbs. H24 comes with the RC64 IR Remote Control.NOTE THAT SINCE 01.01.2019 DirecTV DO NOT ALLOW CUSTOMERS TO SELF ACTIVATE RECEIVERS PURCHASED ONLINE. THEREFORE YOU WILL NEED A DIRECTV AUTHORIZED DEALER TO CREATE AN ACTIVATION ORDER FOR YOU.
- NOTE THAT SINCE 01.01.2019 DirecTV DO NOT ALLOW CUSTOMERS TO SELF ACTIVATE RECEIVERS PURCHASED ONLINE. THEREFORE YOU WILL NEED A DIRECTV AUTHORIZED DEALER TO CREATE AN ACTIVATION ORDER FOR YOU.
- Fully compatible with All RV Directv Dishes.
- Required to be activated as a Leased Receiver as per DirecTV policy change.
- DirecTV sells us receivers at their own discretion whether it is a new or reconditioned model. We have no control over this. Please assume you are getting a reconditioned model.
- In The Box - Receiver, Power Cable, Access Card, 6-Foot HDMI Cable, RC66RX IR / RF Compatible Remote Control.
User questions & answers
Question: | Hola, funciona para Venezuela |
Answer: | No, solo en USA |
Question: | is this receiver what you would use in an rv to get television |
Answer: | This is Directv's high def receiver for up to 1024presolution. You can use it in an RV fine but you needan automatic dish that seeks and locks in on thesatellite as you travel. Hi def quality is awesome !!! |
Question: | Wil I have any problem getting receiver activated without an authorized dtv installer |
Answer: | I had no problem getting the receiver atvivated. Called direct tv and had it running in minutes. |
Question: | How do you mount it to a wall without a bracket |
Answer: | You can use a small shelf or by a mount at best buy if the box is visibleor if you are mounting behind a tv on a wall you can zip tie to the back of TV |
Product description
Feature:
Fully DVB Compliant and H.264/MPEG-2/MPEG-4/AVS.
Support Full / Blind Search on Single / Multiple Satellites.
Support Auto / Manual Search on Terrestrial Network.
Support DiSEqC 1.0 / 1.1 / 1.2 / USALS / Unicable.
Powerful Service Control by Favorites, Lock, Skip, Move, Rename & Delete.
Support 7-day EPG, Event Recording by EPG.
Support Multi-Language (OSD & Menu).
Description:
Item type:Smart Digital Satellite TV Receiver DVB-T2+DVB-S2
Mode IFFT:2k,8k
Decode:
Video Decoder: MPEG2 MP@ML for SD
Audio Decoder: MPEG-1 LayerI & Layer II Musicam
Powerful Multimedia Features
Media Codec:mpeg2, m2ts, ts, avi, mkv, asf, 3g2, 3gp, mp4, mov, flv, f4v, vob, dvix
Audio Codec:wav, mp3
Photo Codec:jpeg, gif, bmp, png
Package Include:
1X Smart Digital Satellite TV Receiver DVB-T2+DVB-S2
1X AV cable
1X IR remote control
1X User Manual
1X gift box
1X adapter (EU to US plug)
Note:
The colors deviation might differ due to different monitor settings.
- Fully DVB Compliant and H.264/MPEG-2/MPEG-4/AVS.
- Support Full / Blind Search on Single / Multiple Satellites.
- Support Auto / Manual Search on Terrestrial Network.
- Support DiSEqC 1.0 / 1.1 / 1.2 / USALS / Unicable.
- Powerful Service Control by Favorites, Lock, Skip, Move, Rename & Delete.
Latest Reviews
View all
Humidifier Plants
- Updated: 18.07.2023
- Read reviews

Hair Steamers
- Updated: 26.02.2023
- Read reviews

Nutro Canned Cats
- Updated: 30.03.2023
- Read reviews

Commercial Dust Cloths
- Updated: 02.07.2023
- Read reviews

Travel Mouses
- Updated: 23.01.2023
- Read reviews