• Adopts latest Bluetooth 5.0 technology. Comparing to most BT 4.2 amps on the market, our product can provide lossless transmission and higher sound quality. Its high quality acrylic shell can also reduce transmission losses and achieve longer distance.
• Many special designs. It is equipped with a colorful LED sound level / VU meter. You can watch them dancing with your music. Much fun and enjoyment. Its newly designed knob can achieve volume control, input mode selection and power on/off.
• Multi-Functions. Our products support multiple inputs (AUX/USB/Bluetooth). Its USB port is compatible with both PC (can be used as PC sound card) and phones with OTG function.
• Though it has very mini size, it can provide 100W (50W each channel) high power, which can drive most home speakers. Its optimized circuit can provide Hi-Fi clear sound with totally no background noise even at its maximum output.
• This may be the most cost effective amplifiers you can find.

User questions & answers

Question:	Can i hook a preamp
Answer:	Hello. Yes, of course. It has RCA input and 3.5mm input. You can connect your preamp with it.
Question:	Does it have any way to adjust bass/tone like on the ns-10g
Answer:	It dose not. But I have to say this. I am VERY impressed with this small amp. I searched for weeks on Amazon for just the right one. I considered the one with the separate bass and treble controls but it was quite a bit more. I have it connected to a pair of outdoor Polk Audio speaker mounted on my patio and I know I made the right choice. When I first hooked it up in my garage I had it connected to a pair of older Realistic speakers and it sounded marginal. So pairing to a set of high quality speakers made a difference on the final install. I just use a free equalizer app to control the audio sound. If you do decide on getting one with the audio controls look for a model that has a sub out. If I could put a separate stand alone powered sub on my patio the system could compete with my garage set up, which is impressive.
Question:	Is this bridgeable? (1 speaker w Left-positive and right negative
Answer:	While the amplifier chip inside this unit can be configured in a number of ways (including "bridgeable"), inexpensive units like this one usually do not allow the user to make that decision (and they often warn against paralleling their stereo outputs lest the amp be damaged or destroyed). Whatever bridging of the multiple on chip amplifiers in this device has already been done by the circuit designer--and is not left as an option for the user. (By contrast, some "higher end" amps with the same or similar, but yet more powerful, amp ICs at their "hearts" do expose multiple bridging option to the user. As always, read the manufacturer's instructions or scan for terms like BTL (Bridge-Tied Load) and PBTL (Parallel BTL).
Question:	Can i hook a preamp
Answer:	07:44 PM Thursday May 30, 2019 … Sure, but it is not required, the preamp just make the Amps power available to other audio components by providing common audio interconnects.

Product features

Nobsound 100W Hi-Fi Bluetooth 5.0 Power Amplifier; Home Stereo Lossless Wireless Audio Receiver

① Bluetooth 5.0 Lossless Transmission

Stable signal, long transmission distance (up to 15m), intelligently compatible with 99% of devices

Pure copper gold-plated terminals to strength the stability and accuracy of audio transmission signal

② Proper size and attractive appearance

Compact size suits very well for home and desktop use. Not only as a power amplifier but also a PC sound card.

Integrated plastic case with LED display, unique design makes it smooth and textured. No visible screws on the surface to ensure its solidness and clean appearance, the VU meter will dance with the music, beautiful and practical.

③ Multi-function and amazing performance

Supports multiple inputs (AUX/USB/Bluetooth). The USB port supports both computers (no driver is required) and phones (with OTG function). It can provide you almost all methods that you want to enjoy your music.

Tone offers you great listening experience even at a very low cost, the volume knob adopts expensive encoders instead of normal potentiometer to avoid noise when adjusting volume.

④ Hi-Fi sound and Powerful

Hi-Fi clear and clarity sound, no audible noise, our engineer spent a lot of time and efforts to optimize the circuit to ensure it has no noise even at the maximum output power.

100W (50W*2) MAX output power, which can drive most home speakers.

Parameters:

• BLUETOOTH AUDIO RECEIVER - Make any stereo a Bluetooth sound system capable of wirelessly playing music from your Smartphone or PC
• PLUG & PLAY - Pairs to your Bluetooth device simply and swiftly, no hassle required
• Aptx LOW LATENCY - Unlike other Bluetooth receivers, the MR230 uses the latest Bluetooth Codec, aptX Low Latency, eliminating perceptible audio delay
• STEREO PHONO CABLE - Transform your HiFi speakers and stereos into Bluetooth Enabled devices
• RECHARGEABLE BATTERY - The MR230 can work anywhere and can easily be recharged using a USB port

Product description

Wireless Update: Upgrade your home stereo, fancy wired speakers, or wired headphones with Bluetooth technology, and free yourself from the tangle of audio cables. Put the Bluetooth function of your phone to good use - Stream your music wirelessly to existing stereo systems at home or in your car. Easy to Use: Simply plug the AUKEY Receiver dongle into your wired headphones or stereo with the included 3.5mm audio cable, and pair with any Bluetooth enabled devices to start streaming your tunes. Hands Free: If your phone receives an incoming call while connected to the BR-C1 Bluetooth Receiver, just press the function button to answer. The built-in microphone delivers crisp, clean sounding calls anywhere.

• Wireless Audio Stream: the Bluetooth 5 receiver allows you to wirelessly stream audio from your Bluetooth enabled devices to your existing wired home or car stereo system, speakers, or headphones
• Long Playtime: Built-in rechargeable battery supports 18 hours of continuous playback and 1000 hours of standby time
• Dual Device Link: Connect two bluetooth devices simultaneously; free to enjoy music or answer phone call from either of the two paired devices
• Easy Use: Navigate your music on the receiver with built-in controls which can also be used to manage hands-free calls or access voice assistant.
• Package Contents: AUKEY BR-C1 Bluetooth Receiver, 3.5mm Audio Cable, 3.5mm to RCA Audio Cable, Micro-USB Cable, User Manual, 45-Day Money Back Guarantee and 24-Month Warranty Card

User questions & answers

Question:	My setup is stuttering, any fixes
Answer:	Check to see if have a battery in the receiving device and if it's still got power.
Question:	Mine beeps at the end of a song the. It reconnects and beeps and misses the beginning of the song, I keep it plugged in. Why does it doing this
Answer:	mine works fine with tv mp3 and my laptops.
Question:	If it is receiving constant power via USB (power never goes off) does the device stay "active" (i.e. I do not have to turn it back on to connect
Answer:	It will power off even if you keep it plugged in to power. Very stupid design as a Bluetooth receiver
Question:	does it turn off automatically once i disconnect my BT device from it? and 2) how do i wake it back up/turn it back on? Thanks
Answer:	Turns off after 15 mins or so of not being connected. Hold the one button for 5 secs as it will make a sound/flash a light signal when on

Product features

Audio Freedom

Upgrade your wired headphones or speakers with wireless connectivity. Output clear, crisp audio up to 33ft from your device.

Simple Setup

Just connect to a wired stereo and pair with your device to start streaming audio wirelessly.

Dual Device Connection

Your phone and computer can be connected at the same time, so there's no need to manually switch connections.

Bluetooth for Your Car

Wirelessly stream audio or take calls through your car stereo system.

Cables Included

3.5mm Audio Cable, 3.5mm to RCA Audio Cable, Micro-USB Cable.

18-Hour Battery

Enough power for listening all day or on a long road trip.

Product description

Pyle Model : PT272AUBT

Hybrid Amplifier Receiver System

Hybrid Amplifier Receiver - Home Theater Stereo System, Bluetooth Streaming, MP3/USB/SD Readers, AM/FM Radio, 300 Watt

Features:

Home Theater Amplifier Receiver System

Ability to Connect External Devices & Speakers

Built-in Bluetooth for Wireless Music Streaming

MP3 Digital Audio File Support

USB Flash & SD Memory Card Readers

AM/FM Radio with LCD Display

1/4’’ Microphone Inputs

RCA (L/R) Audio Input/Output

Banana Binding Post Speaker Output Jacks

Front Panel Button Control Center

Echo, Bass, Treble, Sub, Mic Volume Adjustable

Includes Remote Control & Power Cable

Bluetooth Connectivity:

Instantly Receives Wireless Music Streaming

Works with all of Your Favorite Devices

(iPhone, Android, Smartphone, iPad, Tablet, etc.)

Bluetooth Version: 3.0

Bluetooth Network Name: Pyle Speaker

Bluetooth Password Required: ‘0000’ (4 Zeroes)

Technical Specs:

MAX Power Output: 300 Watt

30 Watt x 2 @ 8 Ohm

60 Watt x 2 @ 4 Ohm

Frequency Response: 40-15kHz (+/-2dB)

T.H.D.: <1%

Signal-to-Noise Ratio: 76dB

Input Sensitivity: 400mV Aux, 6mV Mic

Radio Station Memory: 50 Presets

Tuner: Quartz Synthesizer

Maximum USB/SD Card Support Size: Up to 32 GB

Digital Media File Support: MP3, WMA

Power: 110/220V, Switchable

Dimensions (L x W x H): 19.0’’ x 11.8’’ x 3.2’’

The Pyle Hybrid Amplifier Receiver - Home Theater Stereo System, Bluetooth Streaming, MP3/USB/SD Readers, AM/FM Radio, 300 Watt - Home Theater Amplifier Receiver System - Ability to Connect External Devices & Speakers - Built-in Bluetooth for Wireless Music Streaming - MP3 Digital Audio File Support - USB Flash & SD Memory Card Readers - AM/FM Radio with LCD Display - 1/4’’ Microphone Inputs - RCA (L/R) Audio Input/Output - Banana Binding Post Speaker Output Jacks - Front Panel Button Control Center - Echo, Bass, Treble, Sub, Mic Volume Adjustable - Includes Remote Control & Power Cable - Bluetooth Connectivity: - Instantly Receives Wireless Music Streaming - Works with all of Your Favorite Devices - (iPhone, Android, Smartphone, iPad, Tablet, etc.).

• 3.5 millimeter network adapter wire powered subwoofer switch small tv smart iPhone 4.1 dj voice hdmi phone mono antenna indoor auto radio watt amplify compact ipod bass tube signal pc supply automotive cord house transmitter sub
• 6 INPUTS: The personal digital amp box supports SD / MMC card, USB, MP3, AM FM tuner, AUX, CD player, 2 microphone input w/ echo for karaoke or event hosting, RCA, AUX, and Bluetooth inputs
• BLUETOOTH ENABLED: The integrated hybrid amplifier is equipped with Bluetooth for wireless music streaming. Works with today’s latest devices including smartphone, tablet, laptop, computer, etc.
• A/B SPEAKER SELECTOR: The professional integrated stereo receiver has A/B speaker selector enabling you to choose b/w speaker set. Use either A or B speakers or both. Note that when it is turned on initially it uses both speakers as default
• EQ CONTROLS: The sound amplifying device has crisp buttons for the audio sources and selectors, rotary knob for equalization and master volume adjustments. Includes remote control for distant audio adjustments and a power cable. Note :Refer to the PDF attached below in Technical Specification for Manual
• NOTE: Please refer to the user manual before use and for trouble shooting

User questions & answers

Question:	How do you ajust balance on speakers
Answer:	No it does not. You either have to be using a device which already has Bluetooth. . . or. . . purchase a "dongle" separately.
Question:	Can this amplifier be used as a PA system by connecting a mic
Answer:	When I think of a "full-size" keyboard, I think of 3 sections (left w/ letters & numbers, a middle section w/ Home, End, PgUp, arrows, etc, and a right 10-key section w/ arithmetic symbols.On this keyboard, each of these sections IS as they are on full-sized keyboards, but there is not space between the sections. So the arrows, for example, are immediately under the "Enter" button.Dimensions: 4.5" x 15"
Question:	Why does every speaker I hook up get blown
Answer:	Yes. However, it doesn't work as you'd expect. The FN key must be held down or toggled ala Caps-lock to invoke the function keys F1 through F12. The top row of keys combine function keys and other specialty keys. For example, F1 and speaker mute share the same key. The FN key is held down to invoke F1 unless FN has been locked down. Otherwise, the shared keys are dedicated media controls - a real handy feature. Beware, however, that the lettering (e.g. 'F1') is super subtle on the face of the keys. So even with the FN-lock capability, finding the right function key is a hunt-and-peck operation even in the best of light.
Question:	How do you save radio stations
Answer:	I returned it as it didn't sync right.

Product features

Pyle Hybrid Amplifier Receiver

Home theater amplifier receiver system with the ability to connect to external devices and speakers, via Bluetooth v3.0, for wireless music streaming:

- Bluetooth Network Name: Pyle Speaker

It supports MP3 digital audio format and comes with USB flash & SD memory card readers.

It has AM/FM radio with LCD display, 1/4’’ microphone inputs, RCA (L/R) audio input/output, banana binding post speaker output jacks and front panel button control center.

• UPGRADE YOUR EXISTING STEREO SYSTEM: bluMe HD Bluetooth Music Receiver is a premium Hi-Fi Bluetooth adapter that streams the highest quality audio wirelessly from your phone, tablet or computer to any home stereo system. Easy setup, connects in seconds.
• STUNNING HIGH QUALITY AUDIO: Featuring the latest Bluetooth 5.0 and support for Qulacomm aptX HD, aptX Low Latency, aptX and AAC decoding, bluMe HD adds high definition Bluetooth to any home stereo system.
• BEST-IN-CLASS SOUND: Built-in true Hi-Fi 384kHz/32-bit upsampling Audiophile Digital to Analogue Converter DAC allows bluMe HD to decode and play audio files in all their lossless glory.
• LONG RANGE BLUETOOTH: Employs special circuitry and precision-tuned antenna to extend the wireless range to up to 100+ feet, providing glitch-free performance that works through multiple walls.
• DIGITAL & ANALOG CONNECTIVITY: bluMe HD provides ultimate compatibility with your existing stereo equipment with audiophile-grade Analog (RCA) and Digital Optical (SPIDIF) outputs.

User questions & answers

Question:	Will this playback in true Hi-Res quality?...24-bit/192kHz
Answer:	Yes -- I have one in a Dance studio; it sounds awesome and it's range is incredible.
Question:	Will this work with older Denon Dra 865 receiver
Answer:	Yes, it will work with the Denon DRA 865 receiver.
Question:	How is the range? Can I hook this up to my living room stereo and take my phone outside, through wall, 40 feet away and still have a good connection
Answer:	I would check specs for exact range, but I have no problems with connectivity-zero dropouts even through walls. The sound on this unit is phenomenal, you won't know it's wireless. Just needs a power off button.
Question:	If I plug this into my receiver, and I want to stream from my computer, doesn't my computer need to have bluetooth built in
Answer:	You need blue tooth to stream to this device. It does not work via a network. I use an external blue tooth usb to stream from my laptop which does not have blue tooth built in.

Product features

bluMe HD | Premium Hi-Fi Bluetooth Music Receiver with 32-bit DAC and aptX HD

Designed to connect traditional Hi-Fi stereo systems to the world of streaming audio and Internet radio, bluMe HD instantly breathes new life into your decades-old stereo equipment.

Featuring an audiophile grade DAC, high-end audio codecs - aptX HD / aptX LL / aptX / AAC and wireless range to 100+ feet, bluMe HD is a true high fidelity premium Bluetooth Music Receiver that streams the highest quality audio wirelessly from your phone, tablet or computer to any music system or powered speakers.

Make Any Stereo System Wireless

The advent of digital music has transformed the way we listen to music today. bluMeHD has been designed to connect your aging amplifier, a long-forgotten receiver or powered speakers to the ever expanding world of streaming audio and Internet radio. The bluMe HD Hi-Fi Bluetooth Music Receiver allows you to seamlessly stream stunning wireless music from your smart device to any stereo music system, making your favorite components sounding better than the day you brought them home.

Unlimited Streaming

bluMe HD can play any audio source a Bluetooth enabled device can access, opening up a virtually unlimited universe of music to enjoy through your Hi-Fi audio system. So you’re always in control not just of the music that’s stored on your device but also access premium high-res music services like Tidal, Spotify Qobuz and Pandora, internet radio stations, podcasts and even music libraries connected to a wireless home network...all instantly, wirelessly in Hi-Fi quality.

Sounds Better Than Wired

Vast majority of us tend to hard wire our smart devices to an audio system by either using a dock that pulls analog out of the device or by hooking up to the headphone output jack. In both cases the digital signal is processed by cheap low fidelity DAC used in all smart devices. With bluMe HD the digital signal is processed by its high-end DAC and high-definition audio decoders. No wonder bluMe HD sounds better than wired hookups!

Advanced Wireless Technology

Featuring the best in class Bluetooth 5.0 technology and Qualcomm CSR8675 Bluetooth audio chip which is a premium low-power solution designed to deliver high quality wireless audio performance, bluMe HD ensures a stable and superior Bluetooth audio experience.

High Quality Bluetooth Codecs

With state-of-the-art Qualcomm aptX HD, bluMe HD can easily support 24-bit streaming directly from your phone or tablet, resulting in a ‘better-than-CD’ listening experience. Also, with support for high quality audio codecs like aptX Low Latency, aptX and AAC, bluMe HD provides an enhanced wireless listening experience for all your music via Bluetooth.

Premium Hi-Fi DAC

Equipped with the best in class true Hi-Fi 384kHz/32bit upsampling audiophile DAC - PCM5102A by TI that sports a high SNR of 112dB and is well regarded for its impressive low noise and low distortion characteristics. In short, this means that the sound you hear is crystal clear, rich and retains a wonderfully full dynamic range.

Enhanced Wireless Range

Employs special circuitry and a precision-tuned external high gain antenna ensuring consistent, strong and glitch-free performance for 30 meters (100 feet), providing much more versatility than other Bluetooth receivers.

Digital and Analog Connectivity

Connect with high-quality gold-plated RCA Analog outputs or Digital Optical (SPIDF) output for true high resolution sound through your sound system.

Premium Finish

Encased in premium anodized aluminum housing, the compact and lightweight bluMe HD is a premium product in every sense which completely blends while sitting next to even the costliest and most attractive home audio components.

TECH SPECS | Technical Specifications

Wireless Input: Bluetooth

Bluetooth Version: v5.0

Supported Codecs: aptXHD, aptX LL, aptX, AAC & SBC

Bluetooth Range: 30 meters, 100 feet

Audio

DAC: PCM5102A

PCM Support: 384kHz / 32bit

SNR: 112dB

TDH+N: -93dB

Frequency Response: 10Hz - 20kHz (+/- 0.5dB)

Connections

Outputs: Stereo Analog RCA, Digital Optical (SPDIF)

Materials

Body material: Aluminum

Colors: Black & Silver

• ♥【2-IN-1 Transmitter & Receiver Mode】With Upgrade Bluetooth 5.0 technology, transmits data twice as fast as Bluetooth 4.2, more stable connection NEVER cutting in and out.◆In TX mode connect Bluetooth transmitter to Audio output devices, make your TV, computer, iPod stream audio to your Bluetooth speaker, Headphones ◆In RX mode stream audio from your phone to non-Bluetooth device(home stereo system, speakers). Make your old-fashioned home stereo become a smart speaker in seconds.
• ♥【Pair One with Two + NO LIP-SYNC DELAY】Can connect 2 Bluetooth headsets / speakers simultaneously to your TV in transmitter mode, or pair 2 devices to your home stereo system to stream music in receiver mode at the same time. Automatically connect to your previously paired devices at power-up. Supports HD low latency to virtually eliminate bluetooth audio lag. Note: ①In Low Latency mode, Bluetooth headphones / speakers are also required Low Latency.
• ♥【Built-in Microphone】Built-in microphone, this is a special point different from the other adapters on the market, you can enjoy hands-free calling,pick up or hang up a phone call by click the play/pause button,easily switch between music and call mode. The wireless distance is up to 20 meters (no obstacles).
• ♥【LED Indicator Status & 24H Long Battery Life】 The indicator light design allows you to clearly identify the contents and connections way, make it easier for you to use. With built-in 600mAh battery, it can provide up to 24 hours working time after about 2.5 hours charging.
• ♥【Easy to use】What you get:1 x ELEGIANT BTI-066 Bluetooth adapter,1 x Micro USB Charging Cable,1 x 3.5mm Audio Cable,1 x 3.5mm Jack to 2 RCA Plug Cables,1 x Digital Optical Toslink Audio Cable,1 x User Manual, compatible with 99% of the TVs, car stereo and other devices.

Product features

Transmitter Mode

1. Transmitter Mode

In TX transmitter mode, the Bluetooth Adapter can be plugged into the audio output jack on TVs, PC, computers, iPods, AV receiver and other non-Bluetooth audio sources, and paired to Bluetooth headphones / speakers,e.g. Bose, Beats, Sony, Plantronics, Apple AirPods headphones.

2. Receiver Mode

In RX Bluetooth receiver mode, the Bluetooth Adapter can be paired to cellphones, iPads, or other Bluetooth audio sources, and plugged into wired speakers headphones to stream audio from cellphones to the wired stereos.

Receiver Mode

Specification:

Bluetooth Version: Bluetooth 5.0

CODEC (RX): HD, LL, SBC, AAC

CODES (TX): HD, LL, SBC

Bluetooth range: 20M

Working time: 24 hours

Charging time: 2.5 hours

Batteries: 600mAh

Delivery content:

1 x ELEGIANT BTI-066 Bluetooth adapter

1 x Micro USB charging cable

1 x 3.5mm audio cable

1 x 3.5mm jack to 2 RCA plug cables

1 x Digital Optical Toslink Audio Cable

1 x user manual

1. Enter "Sound Settings"

2. Select "Expert Settings"

3. Set "Digital Output Audio Format" to "PCM"

Built-in Microphone

Our wireless audio adapter has built-in microphone, this is a special point different from the other adapters on the market. With built-in microphone, you can enjoy hands-free calling, pick up or hang up a phone call by click the play/pause button, easily switch between music and call mode.

Smart LED Light

Indicator light design allows you to be more clear about the product connection content and way, which is more convenient for you to adjust when using. Multiple modes are available for you to choose, making it easier to use.

Up to 24-hours Playing Time

With built-in 600mAh battery, this adapter can provide up to 24 hours playing time, and take about 2.5 hours for full charging.

More Audio Connection Option

ELEGIANT Bluetooth adapters equipped with the digital optical and AUX interface, Optical Fibres TOSLINK, 3.5mm AUX and RCA audio cable, provide you more options.

Product description

The iStream Universal Bluetooth Audio Receiver is the perfect solution to stream music wirelessly from your digital device to any device with an RCA or auxiliary IN port. It nearly Bluetooth enables any speaker or receiver with crystal clear results! Pair your desktop, laptop, smartphone or tablet to the iStream and you will be able to stream music up to 33 feet away to the iStream and through you audio device’s speakers. You can even connect the iStream to your car auxiliary port and stream Pandora, iTunes or your favorite audio books wirelessly through your car speakers with amazing clarity. Or, connect a RCA cable with the iStream to connect to your home stereo receiver and stream audio to your home theater system. Free your phone from its dock while enjoying the benefits of wireless Bluetooth audio streaming with the iStream Universal Bluetooth Audio Receiver. No doubt, this little device will change the way you think about streaming music

• Features Bluetooth v2.1 + EDR for superior wireless performance
• Receives signal up to 33 feet away and remembers up to six paired devices
• Play music wirelessly from your Smartphone, iPod Touch, iPhone, iPad, PC or Mac laptops
• Works with any phone or device capable of transmitting the Bluetooth stereo (A2DP) protocol
• Up to 12 hours playback using internal Lithium-ion battery

User questions & answers

Question:	Will this work on my Sony Bravia tv so I can use my ear bud
Answer:	I don't know as I only use one strand
Question:	Will this work with an RCA stav-3870 receiver
Answer:	Not really hot. They are nice lights. I recommend
Question:	will this work with alexa
Answer:	Tag reads broom/outdoor use
Question:	Would it be possible to set it up so that it will pass the sound through the (3.5 mm) input port to the output? and use bluetooth when connected
Answer:	No quite 6’ from end to end.

Product features

Aluratek

Since 2006, Aluratek has enabled the streaming of your favorite audio content with the latest in Bluetooth technology. Bluetooth solutions include receivers, transmitters, TV streaming kits, headphones, earbuds and speakers.

Bluetooth Enable Home Stereos

Stream internet radio wirelessly up to 33' (10 m) from your computer or mobile device to any audio device with an AUX IN (3.5mm) port like boomboxes, stereos and home stereo receivers.

Bring Old Speaker Docks Back To Life

No need to throw out your old speaker docks. If they have a AUX IN (3.5mm) port, dust ‘em off and start streaming podcasts wirelessly from any Bluetooth enabled audio device with crystal clear results.

Stream Music Through Your Vehicle’s Speakers

Connect the iStream to the AUX IN (3.5mm) port on your dashboard to easily play your favorite tracks wirelessly from your smartphone or tablet.

Stream Audio For Hours

Features a built-in rechargeable battery so you can enjoy wireless audio receiving up to 15 hours on a full charge. The iStream will even allow receiving while charging with the included USB charging cable.

Product description

Avoid running inconvenient cables throughout your home. Avoid additional cable/satellite box fees. Easily watch your satellite or cable box signal in another room, garage or man cave with the Nyrius Wireless Transmitter & Receiver System. Seamlessly broadcast your satellite/cable box, DVD player, gaming console or any other audio/video device with standard RCA composite connections to any TV or projector.



Powerful Long Range Signal

This wireless system broadcasts real time audio and video up to 225ft (maximum transmission is under clear line of sight). It also transmits through walls, ceilings, and floors (range/signal quality will decrease based on environment). Watch TV in any room wirelessly with crystal clear sound and video. The directional antennas ensure an optimal radio frequency signal and minimize interference from other devices.



Control Your Device from Another Room

Not only can you watch your video source remotely, you can also control it. The IR (infrared) remote extender will send your device's remote control signals to the NY-GS10 receiver. Change channels, pause your movie - any function available on your remote will work using the remote extender.



4 Channel Frequencies to Avoid Interference

There are 4 channel frequencies to choose from on this system. Matching the channel buttons on the transmitter and receiver will ensure both devices are on the same frequency.



Expandable System

You can easily add additional receiver units to the NY-GS10 system depending on your needs. Purchase any number of additional receivers to broadcast audio and video to even more TVs.



Easy to Set Up and Use

This wireless sender can be set-up in just minutes. Neatly organize all your audio/video components by keeping them out of sight without installing inconvenient cables throughout your home. No software required - simply plug in the included RCA cables to your TV and audio/video device.

• Easily stream your satellite/cable, DVDs, gaming console and more to any TV wirelessly using RCA connections - Not compatible with HDMI. Product not intended for audio specific usage such as speakers or subwoofers, rather for transmission of audio/video signal from source device to display.
• Transmit standard definition audio and video seamlessly from one room to another without the hassle of installing messy cables
• Powerful long range 5.8 GHz signal transmits video and audio up to 225 ft (clear line of sight for maximum range, obstacles such as walls can reduce range to approximately 50-65ft). Transmit through walls, ceilings, and floors (range/signal quality will decrease based on environment)
• Change channels, pause your movie - control your device from another room with the remote extender
• 4 selectable channels to avoid interference with other wireless devices

User questions & answers

Question:	Can I use this product to send a signal from the cable box to the tv, mounted above the fireplace on the opposite wall
Answer:	If your cable box has RCA plugs out available and your tv on the wall has RCA plugs in it will work. You still have to have wires running to the TV from the Receiver of the Nyrius but it is a good solution if your wiring for the cable is not near where your TV is mounted. Signal will not be HD.
Question:	In my Motor Home I would like to transmit a TV signal from one TV (connected to cable but there is no cable box) to another TV. How would I do that
Answer:	The first two answers are correct: you need a video (yellow) and audio (red/black) output to use for transmitting the signal and the 2nd TV needs to have those inputs. If you don't have that, here are a couple of cheap alternatives: for the transmitting (1st) TV, you can add a cheap VCR that has those signals. For the receiving (2nd) TV, you can add a cheap RCA to Coax converter box if that TV doesn't have RCA inputs. Those can be purchased on-line or at Radio Shack.
Question:	Does this work well with multiple walls between the transmitters
Answer:	I don't know about multiple walls. But mine works across one large room and through a wall and no interference problems. I am thinking that it would if the walls are just regular interior drywall . But again, I don't really know for sure.
Question:	For audio use only I received two contradictory answers. What is this about the units having no amp
Answer:	There is a transmitter and receiver. You must run receiver signal through something (amp) to display/hear it.

Product features

NY-GS10 SPECIFICATIONS

IR Frequency: 38/56khz Switching

Signal Range: Up to 225 Feet (Obstacles/Interference Decrease Transmit Distance)

Transmitter Connections: RCA Audio/Video Composite Jacks, External IR Extender Jack

Video Resolution: 480i

Product description

***Why Choose Us***



LAKETO company is dedicated to the development and production of music equipment, providing professional music equipment or accessories for music lovers.





Wireless Guitar System:



Whether you are conquering big stages or small venues, the guitar wireless system that meets your needs .



The wireless guitar system will let you cut the cord between your instrument and your amp in the most reliable way.



Sets will give you superb audio clarity and amazing ease of use.



The greatest thing about these systems is definitely the convenience.





Features:



ISM Band, High frequency Wireless Guitar System



48K/24bit high quality signal acquisition/playback



Superior 110 dB dynamic range



More than 100-feet range indoors



Less than 6ms latency, no lag or signal lose



Simultaneous broadcasts on 4 channels



Up to 5 hours playing time per charge





Specifications:



Input Impedance: 220k



Delay: <6mS



Distortion: <0.02%



Battery: Rechargeable lithium battery 600mAh



Frequency response: 10Hz-22KHz



Frequency response: 10HZ-22KHz +-1dB



Quantity of signal channel: 46, in 4 channel banks



Built-in lithium battery: Over 5 hrs battery life once fully charged





Package List:



1 * Wireless Guitar Transmitter 



1 * Wireless Guitar Receiver 



1 * USB Cable 



1 * User Manual 





Note:



Please make sure the transmitter and the receiver keep distance away from wireless router or other wireless equipments during use.



Eliminate interference from surrounding magnetic fields.



If you have any problem can feel free to contact us and customer service team will reply you within 24 hours

• 🎸Clear Signal Transmission : Wireless Guitar System with 24-bit 48KHz high quality audio broadcasting. High Frequency ISM band is optimal for guitar wireless approved for use in Europe, South America,Asia and Australia.
• 🎸 No-interference : The wireless guitar system utilizes UHF technology, high frequency which less than 6ms latency, no lag or no signal loss. effective range is about 100 meters. supports simultaneous broadcasts on 4 channels.
• 🎸 Convenient Charging : Built-in rechargeable lithium battery, working time is up to 5 hours after fully charged, and comes with a USB cable for convenient recharging, which ensures good performance for your every show.
• 🎸 Plug and Play : Long press the signal key to match transmitter and receiver at the same time, no other operation is required. If Transmitter & Receiver can not connect with each other, they need ID Pairing to Reset before first using, please see User Manual.
• 🎸 Widespread Use : 220° rotatable plug design, available for most electric guitars, bass, electric-acoustic guitars, even. Most popular electric music instruments, electric Guitar, bass, Bakelite guitar and other musical instruments with pickup.

User questions & answers

Question:	Can you use more than 2 of these on same stage
Answer:	I have an acoustic with active pickups and it works fine. Works fine on my passive electric pickups too.
Question:	Can I use this from mixer to powered speakers for audio and live voice? Wanna get rid of cables to speakers
Answer:	Never tried that before and not sure it will work, but worth a try.
Question:	Do they work with a guitar with active pickups
Answer:	We do not suggest to leave them in charging too long, because this will harm the battery, and also there is a safety risk as always. Actually speaking, there is power indicator LED lights on the back side, which will remind you when it is in lower power and need charging, or it is full and no need charging any more, so that you will not forget to charge them, or over-charging them.
Question:	can you use 4 sets of these at same time? when we try more than 3 we get interference
Answer:	The manual shows an example of 1 receiver and 4 guitar pedals (w/transmitter), implying a practical multi transmitter setup. If 1 receiver is used, and multiple transmitters are connected on the same channel (ex, 1 bass, 1 uke, 1 violin all on channel 3) as long as they're not used simultaneously, would they function properly?

Product description

Function & Features:

1.Support multiple channels to choose,effectively avoiding interference from wireless signals such as wireless routing.

2.Our transmitter supports 1 channel AV signal input,and the receiver supports 1 channel AV output.

3.Our transmitter is supported to use with multiple receivers if the transmitter and receiver are in the same channel.

4.Support infrared remote control,and it is compatible with 36KHZ/38KHZ/56KHZ infrared carrier remote control signal(optional).

5.Support PAL/NTSC audio and video transmission,wireless receiving image are clear and stable,colorful;the sound is also clear and without noise.

6.2.4GHZ module has passed the FCC and CE certificate,and our wireless application is safe and reliable.

Package:

-1*Transmitter(TX)

-1*Receiver(RX)

-1*Power Adapter

-1*Audio and Video cable

-Infared Signal Extension Cable(Optional)

-User Manual

• 【Wireless RCA Audio/Video Transmitter & Receiver】 PAKITE wireless TV transmitter and receiver can stream your satellite/cable,DVD,gaming console and more to any TV using RCA connections easily.(NOTE:Can not support TV with HDMI port and only used for TV with RCA interface under 40 inch.)
• 【VIDEO TRANSMISSION,656FT TRANSMISSION DISTANCE 】Our wireless transmitter and receiver can support SD 720*480P video & Audio.Besides,the powerful signal transmits video and audio up to≤200m (maximum transmission is under clear line of sight).The transmission distance may be decreased to 15-20m/49ft-65ft when transmit signal through walls,ceilings or floors.Images received by means of radio are vivid and stable,the color is flamboyant,and the sound is clear.
• 【2.4GHz Frequency Modulation Technology, Strong Anti-interference】Using 2.4GHz frequency modulation technology, digital transmission effectively avoids the interference of various wireless signals, and has strong anti-interference. At the same time, the transmitter and receiver should be set in the same channel and used in pairs. The colors are gorgeous, the sound is clear, and the picture is stable.
• 【IR Remote Control - Truly Plug AND Play,】you just need to connect our wireless transmitter and receiver instead of setting up or download anything from any driver.You can easily control source device at the receiver only by using this AV IR transmitter and receiver.Please pay more attention the position of the device when using the IR function.(NOTE:Please put the transmitter bulging "set-top box" 1-2cm.)
• 【100% Risk Free Service】One year manufacturer warranty and lifetime technical support.If you have any questions or concerns with this product, please do not hesitate to contact with us 24 hours,and we will try our best to help you solve the problem.

User questions & answers

Question:	Hello, is your wireless audio transmitter and receiver susceptible to interference from other devices
Answer:	Use WiFi channels higher than 11 (the 5.0GHz wavelength)

Product features

Eliminate Cables Without Sacrificing SD Quality

Transmits High Definition Video and Audio up to 656ft

Supports resolutions of up to 720p @ 60Hz

Supports Infrared (IR) Remote signal transmission to control source device

Plug-N-Play solution

WPA security protection - already paired

Applications:

living room, patio, garage

man/lady cave

sporting events

Product Acessories

The wireless HDTV connection kit comes with everything you need in the box to get started quickly. The kit includes compatible cables, so there is no need to worry about purchasing the correct cable. Connect the cable between the source video device and the transmitter and between the receiver and the TV. Plug in the power source and you can enjoy the video content.

Best Choice for You

Plug and Play + IR Remote controller + No Wires :Plug in power, and you are ready to enjoy your video content.On the other hand,connect the cables between your source video device and the transmitter and between the receiver and your TV,you can switch and choose what you want to watch.

Installation Is Very Simple

The installation of this kit is very simple and does not require a Wi-Fi network or complicated security configuration. The included transmitter and receiver are security-enabled and can be paired to create an independent wireless network connection.

Requirements: RAV source equipment