12 best dbi antennas

• WiFi Antenna 12dBi 2.4GHz with RP-SMA Connector 2-Pack( Screw-On Swivel) | high gain and long range wireless antenna
• Frequency：2.4GHz | VSWR≤1.5 | Polarization:Vertical Directivity: Omni Directional |Impedance:50 | Temperature:-55℃ ～ +200℃ | Weight: 70g
• Compliant with 802.11b/g/n/ac and wireless LANs,Bluetooth,Zigbee,Xbee and other WLAN applications.(2.4GHz)|It is ideally suited for close-in systems, typically found in apartment complex installations, neighborhood networks, industrial etc.
• If you do need to get distance from your WiFi connection such as a detached garage, This longer antenna can be a good option.-About how to choose WIFI antenna, please read the product description.
• Never worry about any security problems. We are confident in the quality of our Product and willing to provide 1 MONTHS Replacement Warranty and 100% Satisfaction Guarantee. If you unfortunately get a defective one, please contact our customer support.

User questions & answers

Question:	Need an antenna to receive, not transmit, a signal to a remote garage. Want to connect it as input into a repeater in the garage. Can this work
Answer:	yes, it will work. This WIFI antenna can be used well in repeater, Wireless Router, Extender etc. Pay attention to the connector connection, this is a RPSMA MALE (NO PIN)
Question:	will it work for trail camera stealth cam fusion
Answer:	This 2.4GHz WiFi Antenna with RP-SMA Connector is usually used for Wireless Network Router cameras, etc. Therefore, you need to pay attention to whether the connector of the device corresponds to the space usage, etc.
Question:	Is this antenna rated also for 5.8ghz
Answer:	Dear friend, this WiFi Antenna with RP-SMA Connector 12dBi 2.4GHz, is mainly used for Wireless Network Router
Question:	It says dual band, but doesn't mention 5ghz. Does this cover 5g
Answer:	yes very well

Product description

Proxicast's 24” easy-to-install permanent mount omni-directional antenna improves transmit and receive signals for all 3G and 4G/LTE, xLTE, AWS frequencies on Verizon, AT&T, Sprint, T-Mobile, US Cellular, Bell Mobility, Rogers, Telus, Sasktel, Telcel, Movistar, Digicel, IUSACELL and many other cellular operators worldwide.

This antenna is also suitable for unlicensed 900 MHz (ISM) radio applications and 2.4 GHz WiFi / ISM band and GPS use.

The omni-directional design provides high gain without the cellular tower location and alignment hassles of directional antennas.

Its compact size and gloss white finish blend into any environment and make it ideal for many outdoor applications, including building rooftops, utility poles, surveillance trailers, well sites, remote telemetry units, meters, homes and offices.

With the appropriate adapter cable (not included), this antenna is compatible with USB cellular modems and Mi-Fi Hotspots, external 3G/4G cellular modems, routers and signal amplifiers from companies such as CalAmp, Cisco, Cradlepoint, Digi, MoFi, Netgear, Novatel, Pepwave, Proxicast, Sierra Wireless, SureCall, weBoost/Wilson and ZTE.

Specifications

Frequency Range: 698 - 2700 MHz

Gain: 10 dBi

Radiation: Omni

Polarization: Vertical

Impedance: 50 ohms

Connector: N Female - bottom integrated

Material: Fiberglass & Stainless Steel - White poly-urethane coating

Height: 23.6 inches (600 mm)

Mount: Pole/wall (bracket and 2 inch diameter U-bolts included)

Requires a direct coaxial wired connection to an existing modem, router, amplifier/booster.



WILL NOT boost reception of cell phones – they require a powered booster/amplifier.

Is this compatible with my device? -- Email Proxicast to check before ordering.

Note: Use our XBOOM cross-over bracket (ASIN B079WTQ4CM) to install 2 identical antennas separated by at least 22 inches for best LTE MIMO results.

• IMPROVES SIGNAL STRENGTH & SPEED on Verizon, AT&T, Sprint, T-Mobile, Telus, Bell Canada, Rogers, DigiCel and all 2G 3G 4G LTE xLTE AWS GSM CDMA cellular broadband services
• COMPATIBLE WITH routers, modems & gateways from CalAmp, Cisco, Cradlepoint, Digi, MoFi, Netgear, Novatel, Pepwave, Proxicast, Sierra Wireless, SureCall, weBoost, Wilson, ZTE and many others
• INTEGRATED FEMALE N CONNECTOR - No additional ground plane needed
• WEATHER RESISTANT sleek high gloss white urethane and fiberglass finish. Includes pole/wall mounting bracket and hardware (mast sold separately)
• MUST BE CONNECTED VIA 50-OHM COAXIAL CABLE TO AN EXISTING CELLULAR MODEM/ROUTER/RADIO DEVICE. Does not improve signal for cell phones or other devices not directly wired to the antenna

User questions & answers

Question:	Can this be used on a boat, and if so does it work well enough to operate a hotspot
Answer:	You can mount this antenna on a boat but it does not mount in a standard "marine mount" fixture - you would have to screw it to the hull or mount it on a rail etc. Be sure to weatherseal the coax connection at the bottom of the antenna. Use our silicone coax sealing tape: https://amzn.to/2WusCHK I'm not sure what you mean by "operate a hotspot". You can connect this antenna to an existing hotspot with the right adapter cables and it will improve reception of cellular signals for the hotspot. Keep the cabling as short as possible.
Question:	Will it work with a gsm relay
Answer:	Yes as long as you have the correct coax cabling between the relay and the antenna. Check what type of external antenna connector is on your GSM device.
Question:	Does this need to be mounted vertically or horizontally
Answer:	You should mount this antenna vertically. If you intend to use 2 of these antennas for a MIMO setup, mount both vertically about 2 ft apart to achieve spatial diversity and avoid interference between them. Proxicast makes a cross-mount bracket specifically for mounting 2 antennas to a single mast: https://amzn.to/2Qz3j0y
Question:	Will this work with my netgear nighthawk mr1100 on att
Answer:	I am not familiar with this device. I am using it on a Cradle Point IBR 1100. The antenna comes with an N type connector so you would need a cable to connect it to your device. It is working great for me.

Product description

Wi-fi amplification antenna this is a high gain 8dbi whip antenna with a horizontal beamwidth of 360 °. it is suitable for indoor use and is an internal omni antenna. swivel sma antenna is a high performance monopole antenna. compared to other much larger antennas on the market, it has superior broadband high performance characteristics. this antenna is used by many of the world's leading wireless device suppliers. available with a fixed angle of 90 degrees, a fixed straight connector and a hinged. solutions include a carefully designed and optimized reliable solution for these products. the internal antenna is optimized and tuned for its housing and connector. provides maximum sensitivity to your device. terminal antennas are the best choice for external cellular communications, as they eliminate cable loss and various characteristics associated with the antennas supplied with the cables. they are designed for easy screw connection of sma to cellular terminals and cellular equipment. standard tips: 2 * antenna with cable and connector. 1 * plastic bag. we usually use an sma or n connector. if you need a different type of connector, please let us know. we will confirm whether we can do this or not. this is just an antenna. this does not work alone. you need a cell phone signal booster, repeater or router to work with this antenna. when the antenna is designed along with the cable to reduce signal loss. cable length is less than 15 meters. it can be easily installed. if you have problems installing, please write to us directly. the antenna consists of a connector, folds, cable, connecting rod and outer cover. pass the cable through the connecting rod. install the connecting rod into the plate. install the plate in the outer cover. use the instrument to check the reception of the antenna signal, adjust the azimuth of the antenna to obtain the maximum signal. 8dbi dual band omnidirectional antenna (2pcs) for verizon, at&t verizon, wireless network router and huawei 4g

• Significantly increases the range of your wireless device.
• After installing our antenna, you will get a highly effective coating.
• Superior pattern, directivity and variable tilt for best performance
• Works with all wireless devices equipped with an rpsma connector
• The omni-directional wifi antenna is an 8dbi omni-directional antenna that has a dual 2.4 ghz and 5.8 ghz band, has a high gain and helps extend the wireless range to the dead end!

Product description

TECHTOO is one of the most desired brand in North America, Europe and Asia.



*Note:

This antenna with RP-SMA Plug connector (Thread inside WITHOUT Pin).

It only match RP-SMA Jack connector (Thread outside WITH Pin)

DO NOT Support FOSCAM IP Camera (Connector type: Thread outside WITHOUT Pin)

Change ALL the Antennas into NEW TECHTOO 9dBi Antennas, If your old Device Have More Than One Antennas.



TECHTOO 9 dBi 2.4GHz Omni Antenna with RP-SMA Connector Can Increase The Range of Your Wireless Router/Access Point or Client.

Off the shelf equipment typically has a 2.0 dBi antenna. This antenna will increase your signal strength and therefore range.



The Rugged Polycarbonate Body Makes Them Suitable For Use In a Wide Variety Of Applications, Including Office LAN Environments

Factory Floors, Remote Telemetry And Other Environments.



The RP-SMA Connector Has Threads on The Inside And a Center Socket. The Tilt And Swivel Feature Allows The Antenna To Be Positioned At Practically Any Angle.

This Screw-on, Swivel Mount RP-SMA FEMALE Connector Is Compatible With Many Wireless Communications Systems Including: Dlink, GRE America, Linksys WET11, Maxtech, Netgear, Proxim, Siemens, SmartBridges, Waveaccess, Zcom, Netgate Wireless-Redy M1n1wall, RouterStation PRO Products And All USB Adapters With Screw on/off Antennas ,Such As The ALFA And EnGenius USB products.

• Increases the range of your wireless device
• Simply replace current antenna to increase signal strength
• Gold Plated RP-SMA Connector( Screw-On Swivel )
• 2 x 9dBi RP-SMA FEMALE (No Pole Inside Connector) Antenna for 2.4GHz For 802.11 B/G/N Frequency
• Extend Wireless Range to Dead Spot

User questions & answers

Question:	Has anyone used these with LTE modem devices
Answer:	Hi, this wifi antenna is designed for wifi frequency that is on 2.4GHz. It can not work on LTE frequency. You need to check with your LTE service company to find out what frequency they provided and then choose the correct antenna which can support that LTE frequency. One more thing, you need to idantify the connector type on the antenna to make sure it can match the connector type on your device. We have many antenna which can support 3G 4G LTE, you can check on our store front here: https://www.amazon.com/s?marketplaceID=ATVPDKIKX0DER&me=A3FOIJMNOEIRMM&merchant=A3FOIJMNOEIRMM
Question:	will this support wireless speed with 5.0Ghz or is it only for 2.4Ghz
Answer:	Hi, this antenna is for 2.4Ghz signal. but it can also transmit 5Ghz signal(signal maybe weak ). The best performance is under 2.4Ghz. We do not suggest to use for 5Ghz network device.
Question:	Is this compatable with awus051nh + 9dbi
Answer:	Hi, yes it compatable with awus051nh + 9dbi and most of the high power Alfa wireless network adapter.
Question:	Does this work with d-link dir-600 router? i'm guessing there's some kind of standard cause i bought a tp-link 5dbi antenna and it fit just fine
Answer:	Hi, this antenna can support d-link-600 router, they both work on 2.4Ghz and the antenna connector can match with the router.

Product description

Proxicast's dual polarized directional LTE MIMO antenna is ideal for signal enhancement in virtually any cellular application.

It is compatible with 4G/LTE data services from Verizon, AT&T, Sprint, T-Mobile, Bell Mobility, Rogers, Telus and most other cellular operators worldwide.

Two separately fed ultra wideband elements in a single housing focus radio energy enabling connection to distant cell towers. Cross-polarized elements enable multiple input / multiple output (MIMO) connectivity for LTE resulting in higher performance.

With appropriate adapter cables (not included), this antenna is compatible with cellular modems, hotspots and routers from Cisco, Cradlepoint, Digi, MoFi, Pepwave, Sierra Wireless and others.

The compact, light-weight rugged housing, heavy duty mounting hardware and corrosion-resistant materials are ideal for outdoor applications.

Electrical

• Frequency: 698-960/1710-2700 MHz

• Impedance: 50 Ohm

• Gain: 7 / 10 dBi freq. dependent

• Beam Width: Hz. 70/75 deg, Vrt. 75/60 deg

• Polarization: Vertical + Horizontal

• VSWR: < 1.8:1

Mechanical

• Connector: 2x N Female on 12 in RG58U pigtail

• Dimensions: 11.8 x 7.2 x 2.75 in

• Weight: 1.4 lb

**IMPORTANT

This antenna is for direct wired connection to cellular data devices with 2 antenna connectors

Includes Proxicast’s 12 month Warranty & US-based Technical Support.

DON’T

• Use RG59/RG6 coax (75 Ohm TV cable from the hardware store)

• Use a Y-splitter to connect 1 modem port to both antenna leads

• Focus on signal “strength” (RSSI or bars); optimize signal “quality” (SINR, RSRQ) instead

DO

• Ask provider if your tower is MIMO-enabled

• Use 50 Ohm coax cables. See part# ANT-140-020

• Keep cables as short as possible

• Weatherseal outdoor connections. Use Silicone Tape part# ANT-900-002

• Designed for 4G/LTE cellular networks such as Verizon, AT&T, Sprint, T-Mobile, Telus, Bell Canada, Rogers, DigiCel and more
• 10 dBi cross-polarized 75 degree directional beamwidth MIMO design increases signal strength and data speeds for remote sites with poor cellular signal coverage
• 2x Female N connectors with 12" pigtail *** REQUIRES 2 COAX EXTENSION CABLES ***
• Compact, light-weight, rugged weatherproof housing and corrosion-resistant materials
• Includes heavy duty pole mounting bracket and hardware (mast sold separately)

User questions & answers

Question:	Is the mounting mast metal or plastic? Are two lightning arresters needed? Thanks
Answer:	You can adjust 0 to 7 on the front knob of the freezer
Question:	Will this get the full advance lte -45 +45 mimo streams or will it only get two individual lte streams
Answer:	Minimum setting is still freezing on a "freezer". If it doesnt freez at minimum send it back. They sent you a refrigerator.
Question:	I have a verizon jet pack mifi 6620l will this work? i believe it has a ts-9 antenna port
Answer:	It is awkward but not that heavy. I muscled it from the front porch to the den and I am a 64 year old woman and not in great shape.
Question:	I'd like to connect this antenna to a netgear lb1120 (4g lte modem - has two ts-9 connectors). will this antenna work and what 50' cable can i use
Answer:	I put a gallon of water in the freezer and it took approximately 5 hours to freeze completely. I have my temp control at the half way point

Product description

Alfa AOA-2458-79AF is a new high quality, low cost TAA compliant dual band 9 dBi gain omni-directional 2.4/5 GHz Wi-Fi antenna with N-female connector. The gain is 9 dBi for 5 GHz and 7 dBi for 2.4 GHz. This has weather proof casing. This is a great antenna for boat or RV use. This does not come with a mounting bracket.



This is 12.5 inches tall.



This is an antenna only, not a standalone Wi-Fi radio and cannot be used by itself to pick up Wi-Fi signals. It must be connected to a compatible Wi-Fi radio or transmitter. To get dual band capability, you must connect it to a dual band capable Wi-Fi receiver or transmitter- this cannot transform a single band radio into a dual band device.



With its N-female connector, this can be connected directly to a variety of outdoor WiFi products including Alfa and Ubquiti products. Contact our sales team for more information about compatible extension cables and pigtails for use with your particular WiFi receiver or see below for links. This antenna was designed for direct connection to a WiFi receiver or transmitter and does not have a mounting bracket.



It has an N-female connector, and we do carry an antenna extension cable which will allow you to connect this to all of Alfa Network's popular line of Wi-Fi adapters that include RP-SMA connectors.

• Dual band 2.4/5 GHz antenna
• N-female connector (designed to connect to N-male connector on device)
• Strong material, durable and weatherproof for outdoor use
• ALFA Network is the name to trust in wireless networking
• Backed by 1 year factory warranty

Product description

TECHTOO is one of the most desired brand in North America, Europe and Asia.



*Note:

This antenna with RP-SMA Plug connector (Thread inside WITHOUT Pin).

It only match RP-SMA Jack connector (Thread outside WITH Pin)

DO NOT Support FOSCAM IP Camera (Connector type: Thread outside WITHOUT Pin)

Change ALL the Antennas into NEW TECHTOO 9dBi Antennas, If your old Device Have More Than One Antennas.



TECHTOO 9 dBi 2.4GHz Omni Antenna with RP-SMA Connector Can Increase The Range of Your Wireless Router/Access Point or Client.

Off the shelf equipment typically has a 2.0 dBi antenna. This antenna will increase your signal strength and therefore range.



The Rugged Polycarbonate Body Makes Them Suitable For Use In a Wide Variety Of Applications, Including Office LAN Environments

Factory Floors, Remote Telemetry And Other Environments.



The RP-SMA Connector Has Threads on The Inside And a Center Socket. The Tilt And Swivel Feature Allows The Antenna To Be Positioned At Practically Any Angle.

This Screw-on, Swivel Mount RP-SMA FEMALE Connector Is Compatible With Many Wireless Communications Systems Including: Dlink, GRE America, Linksys WET11, Maxtech, Netgear, Proxim, Siemens, SmartBridges, Waveaccess, Zcom, Netgate Wireless-Redy M1n1wall, RouterStation PRO Products And All USB Adapters With Screw on/off Antennas ,Such As The ALFA And EnGenius USB products.

• TECHTOO 9dBi Omni WiFi Antenna with RP-SMA Connector for Wireless Network Router/USB Adapter/PCI PCIe Cards/IP Camera/Wireless Range Extender
• Increases the Range of Your Wireless Device Such as Router, Access Point, Mini PCIe Network Card, Wireless Wan Range Extender
• Simply Replace Current Antenna to Increase Signal Strength, Extend Wireless Range to Dead Spot
• 1x 9dBi RP-SMA FEMALE (No Pole Inside Connector) Antenna for 2.4GHz For 802.11 B/G/N Frequency
• Gold Plated RP-SMA Connector( Screw-On Swivel )

User questions & answers

Question:	Is that a good replacement for the antenna that came on my master built smoker? It doesn’t seem to want to connect to WiFi from the garage
Answer:	It might work. It definitely improved my computer's wireless reception. Good luck.
Question:	Will this work with a Furrion observation camers outside on an RV
Answer:	Most likely it should.
Question:	Does this work with a Xbox one
Answer:	This will work with any router with a smaller antenna, you simply replace the smaller antenna with the new larger one. I was able to increase my wifi range by one bullet through out the house. If you need more range you can buy a wifi range extender.
Question:	Anybody use this for a wireless camera
Answer:	Hi, We can see from the review there are some buyer use this antenna on their IP camera and get a good result. But please note that this antenna can not work with FOSCAM IP camera, because FOSCAM use SMA connector and our antenna is RP-SMA connector.

Product description

Proxicast's universal wide-band Yagi antenna is compatible with all 4G/LTE/xLTE data services from all major cellular service providers. It can also be used with 2.4 GHz Wi-Fi access points and 900 MHz radio systems.

This small, light-weight, easy-to-install directional antenna improves transmit and receive signals across a wide frequency spectrum range and is ideal for many outdoor applications, including building rooftops, utility poles, surveillance trailers, well sites, remote telemetry units, meters, homes and offices.

With the appropriate adapter cable (not included), this antenna is compatible with USB cellular modems and MiFi Hotspots, external 3G/4G cellular modems and routers from companies such as Cisco, Cradlepoint, MoFi, Digi, Pepwave, Proxicast, and Sierra Wireless. It is also compatible with most signal booster/amplifiers.

Electrical Properties

• Frequency Range: 698-2700 MHz

• Impedance: 50 ohms

• Gain: 11 dBi

• Beam Width: Vert. 60/55 degrees, Horiz. 90/70 degrees

• Polarization: Vertical

• VSWR: ADGP < 1.5:1

• Max Input Power: 100 W

Mechanical Properties

• Connector: N Female on 12 inch LMR 195 pigtail (coax may be black or white)

• Material: ABS / Brass / Aluminum - RoHS compliant

• Operation Temp.: -40C to +60C

• Max Wind Load: 216 km/hr (134 mph)

• Weight: 794 g (28 oz)

• Dimensions: 290 x 200 x 120 mm (11.4 x 7.9 x 4.7 in) excluding 120 x 75 mm bracket

• Mounting: Pole or Wall (2.0 in dia. U-bolts & bracket included)

Directional antennas must be pointed toward a cell tower. For help locating your nearest tower, consult the OpenSignal or CellReception sites.

For MIMO applications mount 2 identical Yagi antennas at a 90 degree angle to each other.

Since 2000, USA-based Proxicast has been manufacturing innovative professional grade wireless equipment.

• Works with 2G, 3G, 4G, LTE, xLTE, AWS, GSM & CDMA cellular carriers such as Verizon, AT&T, Sprint, T-Mobile, Telus, Bell Canada, Rogers, DigiCel and more
• Also compatible with 2.4 GHz Wi-Fi and 900 MHz radio systems.
• High gain 11 dBi performance increases signal strength and data speeds in areas with marginal coverage
• Female N connector with 12" pigtail - Outdoor weatherproof enclosure protects antenna elements
• Includes pole/wall mounting bracket and hardware (mast sold separately)

User questions & answers

Question:	Can anyone answer how well this works with netgear nighthawk m1? if so what other components would i need to hook to my nighthawk? thank you
Answer:	You will need a TS9-SMA adapter cable: https://amzn.to/2XSlmpN to connect to 1 of the Nighthawk's external antenna jacks and an SMA to N coax extension cable: https://amzn.to/2YfEAoE If you plan to use MIMO, then you need 2 of everything (antenna + adapter + coax) to connect to each of the Nighthawk's 2 antenna ports (a "Y" cable defeats the purpose of MIMO). If you mount the antenna outdoors, you need to weatherseal the connectors with silicone tape: https://amzn.to/2YfEAoE
Question:	Can i use this to connect a remote Wifi Booster to a router
Answer:	This antenna supports 2.4 GHz WiFi (b/g/n). You will need a Reverse Polarity SMA Male to N Male 50 Ohm coax cable such as this one: https://amzn.to/2Ygz5CP
Question:	I have two ts9 connectors on my netgear lb2120, do i need to setup mimo or can i pigtal one connection to both ts9 ports? what connectors do i need
Answer:	Using a "Y" pigtail will not give you the benefit of MIMO technology. MIMO requires 2 independent antennas. For each antenna, you will need a TS9-SMA pigtail https://amzn.to/2RTdSih along with the appropriate length SMA to N coax cable: https://amzn.to/2PpxLMc Mount the antennas at +/- 45 degrees as shown in this picture: https://images-na.ssl-images-amazon.com/images/I/81MqWGGwHsL._AC_SL1500_.jpg
Question:	Plan to use with a zte warp connect. what is the max cable length that can be used before the gain drops noticeably with good cable
Answer:	The signal loss depends on several factors: - Frequency of the signal - Thickness (diameter) of the cable - Length of the cable - Number of connectors between the radio and antenna For short distances (10 feet or less), the signal attenuation at 3G/4G/LTE frequencies is negligible for most applications, so LMR100 or LMR195 sized coax is appropriate. At longer distances, thicker coax cables are required to minimize signal loss. To prevent excessive signal loss, shorter cables should NOT be linked together to make a longer cable. It is best to use a single cable whenever possible. It is also acceptable to use a thick cable for the long portion of a cable run and a short thin cable to connect to equipment or antennas, but always try to minimize the total cable length and number of connectors. We recommend LMR195 coax for assemblies up to 10 ft, LMR240 for lengths up to 25 ft and LMR400 for lengths up to 50 ft. Proxicast manufactures various coax cables for this purpose: https://www.amazon.com/gp/product/B00QZEQ5EA Below is a table showing the signal loss at various frequencies. Most US cellular systems operate between 700 and 2100 MHz. Total Cable Assembly Signal Loss: (Including 2 Connectors) 10 Feet 25 Feet 50 Feet Frequency LMR 195 LMR 240 LMR 400 700 MHz 1.1 dB 1.9 dB 1.9 dB 900 Mhz 1.3 dB 2.1 dB 2.2 dB 1700 Mhz 1.8 dB 3.0 dB 3.1 dB 1900 MHz 1.9 dB 3.2 dB 3.3 dB 2400 MHz 2.1 dB 3.6 dB 3.7 dB 2700 Mhz 2.3 dB 3.8 dB 4.0 dB 5000 MHz 3.2 dB 5.3 dB 5.6 dB 5800 MHz 3.4 dB 5.7 dB 6.1 dB Be sure to weatherseal any outdoor connections. Moisture in the cable will seriously degrade your signal. Consider our Silicone Weathersealing Tape for Coax Connectors: https://www.amazon.com/gp/product/B00K5GW67O

Product description

This Wi-Fi Dual Band Omni-Directional long range antennas will significantly increase the range and strength of your Wi-Fi signal. Our quality built Omni-Directional Dual Band antennas are a direct replacement for the antennas that comes standard with routers, access points, VOIP devices. Each Dual Band antenna is Omni directional, no aiming is required - it can send and receive Wi-Fi in all directions. Installation is very easy – just twist off the factory antennas and twist on our Antennas.

Wi-Fi Antennas will WORK WITH ANY ROUTER or Network Device with RP-SMA Female Connector. The KIT no soldering for Wireless Routers Linksys Cisco, E2000 E2500 EA2700 E3000 EA3500 E4200 EA4500 EA6200 WRT310N WRT320N WRT330N WRT400N WRT610N WRT54GS2 Belkin F7D8301 Netgear N600 N750 N900 WN2500RP WNDR3300 WNDR3400 WNDR3700 v.2v.3 WNDR3800 WNDR4000 WNDR4500 WNR834B v.1v.2 WNR2000 WNR2200 DGND3700 v.1v.2 D-Link DIR-655 Buffalo WZR-HP-G450H Mini PCIe Cards Network Extension Bulkhead Pigtail PCI Wi-Fi WAN Repeater. Use for mini PCI-E interface, do not use for M.2(NGFF) interface. Please check and confirm your cards interface before purchase.



PRODUCT SPECIFICATIONS:

- Product name/No.: 2.4GHz/5GHz Dual Band Omni-Directional Wireless Router Antenna/HSA-2458TE9;

- Gain-dBi: 9;

- Frequency Range: 2.4 Ghz & 5 Ghz (Dual Band);

- VSWR: < 2.0;

- Polarization: Linear Vertical;

- Impedance: 50 ohm;

- Direction: Omni-directional;

- Connector: RP-SMA Male;

- Dimension: 39cm x 1,5cm;

- Net Weight: 50g;

- Operating/Storage temperature: -20°С ~+60°С/ -30°С ~+75°С;

- Operating Humidity: 0% to 85% (non-condensing);

- Cable length/type: 7 inch(17.8cm) / RG178 low loss coaxial.



PACKAGE INCLUDES: Kit of 2 Omni-Directional long range Wi-Fi 9dbi Dual Band Antenna 2.4Ghz/5Ghz and 2pcs of RF U.FL Mini PCI to RP-SMA Female Pigtail Antenna Wi-Fi RG178 Low Loss RG178 Cable. Kit for miniPCIe cards.

• Package Includes: Set of 2 Omni-Directional long range Wi-Fi 9dbi Dual Band Antenna 2.4Ghz/5Ghz and 2pcs of RF U.FL Mini PCI to RP-SMA Female Pigtail Antenna Wi-Fi RG178 low loss cable
• Wi-Fi Dual Band Omni-Directional Antenna length: 15,35" (390mm); RP-SMA to U.fl/(IPEX/IPX) RG178 low loss cable length: 7"(17,8 cm)
• No aiming required: Omni-directional Wi-Fi Dual Band Antenna with +9 dB gain; RP-SMA Male antenna connector is compatible with most wireless routers and devices
• Use for MINI PCI-E interface, do not use for M.2 (NGFF) interface
• Brand New and High Quality, all antenna kits are tested and quality controlled prior to shipment

User questions & answers

Question:	Will these antennas work with existing M.2 wifi card cables that came with the motherboard
Answer:	Hi! The quantity of the antenna is three
Question:	Will this antenna work with the linksys ac3200 router
Answer:	This is not a WiFi router, but antenna. You cannot connect directly from a router using a network cable. Look for a Bullet M3 or something as an access point to connect to your router and then connect the antenna to that.
Question:	Does this support 802.11ac wifi
Answer:	I believe you will need a wireless router with appropriate adapters to connect the antenna to the wireless router.
Question:	Will this work with a pci-e wifi adapter? like asus ac
Answer:	yes

Product description

Wideband Directional Antenna,11 dBi Yagi 3G/4G/ LTE Directional Antenna for Cellphone Amplifier/Cellular Signalbooster with N Female Connector



Keep your mobile phones connected and be accessible wherever you are with this Wide Band Directional Antenna with N-Female Connector

Style:4G Wide-Band Directional Antenna

Mechanical

Connector: N-Female

Wind loading area (sq ft): ≤ 2.13

Rated wind velocity (mph): 90

Mounting mast diam. (in): 1.5-2.0 (not included)

Radiator material: aluminum

Radome material / color: ABS Anti UV / White

Water resistance: IPX Weather rated

Operating temperature (°C/F): -40 to +55 / -40 to +131

Electrical

Frequency range (MHz): 698-960 / 1710-2700

Polarization: Vertical / Horizontal

Gain (dBi): 8.5 Avg / 9.5 Peak

Half-power beam width (°): Low Band: 100-109 Horizontal, 65 Vertical

Half-power beam width (°): High Band: 70-85 Horizontal, 55 Vertical

Front-to-back ratio (dB): ≥ 10 AVG

Impedance (Ω): 50

VSWR: ≤ 1.6:1 / 1.4:1 avg

Maximum input power (W): 100

Lightning Resistance: DC Ground

Yagi Directional Roof Antenna Features

Direct at cell tower for best signal

UV stable white sealed radome

Rugged and waterproof for all weather operation



This signal booster lets you experience unmatched data speeds and unparalleled mobile signal strength in areas where you once had poor coverage, letting you make calls or send messages whenever you need to and connect to the internet in virtually any remote location. It boosts signals up to 32 times their current strength, giving you crystal-clear call quality, so no more dropped calls.

This signal booster has an weatherproof structure. It lets your mobile phone receive large volumes of data quickly. It can also capture exterior signals and amplify them in your car, home, or office.

Package included: 1x Cell Phone Signal Booster Log Periodic Cellural Antenna

• 1.COMPATIBILITY: Cell Phone 3G/4G/LTE Hotspot Compatible.This Yagi Directional Roof Antenna works with 2G, 3G, 4G,LTE,xLTE,AWS,UMTS,GSM & CDMA cellular carriers such as: AT&T, T-Mobile, Verizon, SPRINT, Straight Talk, Telus, Bell Canada, Rogers, DigiCel, U.S. Cellular and many more. *Government regulations in the U.S. prohibit boosting a particular frequency used by some of the Sprint network. Most Sprint customers still see performance improvement from ALHXGUSLO Wideband Directional Antennas.
• 2.VERSATILITY: Wide Range Multipurpose Log Periodic Cellular Broadband. The ALHXGUSLO Wide Band Yagi Directional Antenna supports multiple devices so that everyone can experience enhanced 4G LTE and 3G signals. It features up to +10.6 dB gain.
• 3. OUTSIDE YAGI CELLULAR ANTENNA FOR SIGNAL BOOSTERS: The main benefit of this wideband Yagi antenna is its ability to focus its signal in one direction leading to the greater gain figures. High gain 11 dBi performance increases signal strength and data speeds in areas with marginal coverage. The ALHXGUSLO Wideband Directional Antenna boosts your 4G LTE and 3G signal up to 32X for fewer dropped calls, higher audio quality, and faster uploads and downloads.
• 4. PREMIUM QUALITY: This Wideband antenna features an N-Female connector that facilitates the transfer of high-frequency information. The female connector can quickly receive large amounts of data and works at radio frequencies in the multi-megahertz range.IMPORTANT NOTE: This product is outdoor antenna only, it must work together with signal booster/repeater, It will need extension cable to connect the outdoor antenna to signal booster.
• 5. EASY SETUP: Yagi Cell Antenna is a roof antenna, it is designed for exterior installation and use on stationary objects such as buildings or houses. Female N connector with 12" pigtail - Outdoor weatherproof enclosure protects antenna elements, this Wideband directional antenna from features a rugged waterproof structure that’s designed to withstand damage from the elements. This package includes a tilt-and-swivel mast bracket for 1.25- to 2-inch pipe or mast (pipe& mast are not included)

User questions & answers

Question:	Is this all i need with an addition of a male coax to plug into my router
Answer:	No stacking- just 3 separate storage bins. I had to rest mine on top of food/packages, still a big help to organizing contents of chest freezer.
Question:	does it work and Band
Answer:	Yes. I use them in my chest freezer to organize items.
Question:	Do you run the cable into your house and connect it to your router
Answer:	33 inches tall 19.5 inches width 22 inches length
Question:	what is the range of enhancement of my cell service with this device
Answer:	It is 33 inches tall.

• Works on any 3G / 4G / LTE / GSM cellular network such as Verizon, AT&T, Sprint, T-Mobile and more
• Compatible with Modems and Routers from CalAmp, Cisco, Cradlepoint, Digi, MoFi, Multi-Tech, Pepwave, Proxicast, Sierra and others
• Dual Antenna MIMO Design Improves Performance - Flexible Magnetic & Adhesive Mounting Options
• 2.5 dBi Omnidirectional Gain - Similar to standard 6" tall antennas
• 0.6 inches high x 3.15 inches diameter - SMA Male connector with 6 ft coax pigtail - Perfect for kiosks, vending machines, control panels, ceilings and covert installations

User questions & answers

Question:	Does this antenna have to be mounted relative to a specific plain, ie. can it be mounted on a vertical surface or upside down
Answer:	For best results, the antenna should be placed so that the top faces upwards.
Question:	Will this also work with WiFi or is the frequency different
Answer:	This antenna is for 3G/4G only. It will not work on WiFi frequencies.
Question:	Is your antenna simply to allow us to combine main and div/aux leads into a single antenna
Answer:	You will connect the 2 leads of this antenna to the Main and Aux antenna jacks on your modem/router. Inside our antenna's radome are 2 isolated antenna elements which provide the separation required for MIMO operation.
Question:	what adapter is recommended to plug this antenna into my mifi8800l
Answer:	The 8800L has 2 TS9 external antenna ports. We make a version of this antenna with TS9 plugs - ANT-122-M09. See: https://amzn.to/2JHmB1Q

Product features

Inconspicuous

• Low Profile - 0.6 inches Tall
• Simple Geometric Shape
• Omnidirectional Coverage
• Paintable to Blend into Surroundings

MIMO Design

• Two Isolated Internal Antenna Elements
• Improves Signal Quality
• Maximizes Throughput

SMA Connectors

• Antenna's SMA Male Plugs Mate with SMA Female Jacks on LTE Modems/Routers
• SMA Jacks have External Threads and a Center Hole

Stick-On Installation

• Strong Internal Magnet
• 3M Permanent Adhesive
• Mount to Metal Surfaces
• Paired Coax Keeps Cabling Neat

Works on All 4G/LTE Networks

• AT&T
• T-Mobile
• US Cellular
• Verizon
• Canada
• Mexico
• Caribbean

Compatible with Any MIMO SMA Modem/Router

• Cisco
• Cradlepoint
• MoFi
• Pepwave
• Sierra
• . . . and many others

Vending Machines

• Inventory Levels
• Machine Status
• Advertising Updates
• Price Changes

Kiosks & ATMs

• Bank Machines
• Self Service Kiosks
• Digital Signage
• Alarm Systems

Machine Control Panels

• PLC's
• NEMA Enclosures
• Weather Stations
• Meters & Pump Houses

Vehicles

• Cars / Trucks
• RV / Campers
• Vans
• EMS

For Best Results

• Orient antenna vertically
• Do not extend coax cables
• Do not use a Y cable to connect the 2 antenna leads to 1 modem port
• Fully tighten coax connectors to modem antenna ports
• Stand 3+ feet away from antenna when testing
• Maximize signal Quality (SINR, RSRQ) not signal Strength (RSSI, RSRP, bars)

Product description

7 dBi gain antenna upgrade with heavy duty magnetic base and 11’ cable for BearExtender PC

This is a heavy duty magnetic antenna docking base with 11 feet of LMR-200 shielded coaxial extension cable and a detachable 7 dbi gain blade antenna. The connectors are RP-SMA. It is an optional upgrade for the BearExtender PC long range Wi-Fi USB adapter and will also be compatible with other brand equipment that has an RP-SMA antenna port.



Better placement = better signal

Because of the magnet base and cable, you can place this 7 dBi antenna up to 11 feet away from your BearExtender. A strong magnet in the base allows for easy positioning. Signals carry better when the antenna is higher up and in a more open area.



Premium shielded coaxial cable

Unlike cheaper base options, this includes 11 feet of LMR-200 shielded low loss extension cable built into the base to limit your signal gain loss. Simply unscrew the existing antenna from your BearExtender PC or compatible RP-SMA device and replace it with the cable from this magnet base.



What’s included:

• 1x heavy duty magnetic antenna docking base with integrated 11’ antenna extension cable
• 1x 7 dBi blade style RP-SMA high gain Wi-Fi antenna

Caution

The magnet base contains a very strong industrial class magnet. Some items including computer hard drives and magnetic strips on credit cards can be affected when this base is used nearby. Do not affix base directly to a computer

• RP-SMA antenna base with heavy duty magnet to keep it in place even in heavy winds.
• 11 foot premium LMR-200 shielded low loss coaxial extension cable built-in to magnet base.
• 7 dBi blade style omni-directional high gain antenna that is detachable from the magnet base.
• Cable includes RP-SMA connector for hookup to BearExtender PC Wi-Fi USB adapter or other Wi-Fi devices with RP-SMA port (such as long range USB adapter or router).
• Requires compatible Wi-Fi receiver like BearExtender PC USB adapter, or compatible router in order to function. This is an antenna and docking base package only, it does not include a Wi-Fi receiver.

User questions & answers

Question:	can you just buy the bass mag mount? the cable should be longer
Answer:	Thank you for your question. Currently, this item is only available in combo format with both base and antenna. The manufacturer understands that some buyers may need shorter or longer cables. Bearifi does not currently offer different length options due to the cost of manufacturing and warehousing all the different options. They determined that a shorter cable is often not useful because you cannot get the base very far away from the WiFi adapter or router you are using it with. As another commenter noted, going too long results in an unnecessary gain loss for users that don't need a longer length. What you can do if you need longer is buy a separate 200 or 400 grade shielded RP-SMA male to RP-SMA female extension cable to use in conjunction with this base.
Question:	Can you purchase this unit without the wi-fi antenna
Answer:	No. Wi-Fi antenna comes with the Magnet base and the extension cable.
Question:	What is the length of the antenna
Answer:	The length of the Bearifi BearExtender Antenna is 9 inches when in a straight position and turns to 8.25 inches when the antenna is bent. Meanwhile, the cable length is 11 ft (3.5 meters).
Question:	is the antenna base water resistant? Curious if I can leave it attached to the outside of my van if it starts to rain
Answer:	Hi,It is not rated for long term outdoor use. You should be fine with limited exposure. Long term exposure (weeks and months) will lead to corrosion to the connector. You can apply waterproof tape or silicon grease to the connector to prevent water from entering. However, it is not outdoor rated.Thanks,PAC Solutions