13 best thermaltake desktop computer cases

Product description

Bring out the modder within you. The Core P3 Tempered Glass Edition Open Frame chassis sets a new benchmark in groundbreaking open frame chassis design. With full support for liquid cooling and Thermaltake PCI-e X16 Riser Cable included - the Core P3 is built from the ground up to make even the most advanced PC customization and modification effortless and hassle free, making it a dream to build with. The open frame panel design is protected with a clear acrylic panel - behind which sits the chassis frame, with supports the latest PC hardware, AIO and DIY liquid cooling solutions. Specially designed dual GPU and PSU layouts, plus a 3-way stand placement (wall mountable, horizontal laying and vertical standing) allow users to position the chassis any orientation - and appreciate your artwork status worthy build.    P/N: CA-1G4-00M6WN-05 Model: Core P3 TG Snow Dimension (H x W x D): 512 x 333 x 470 mm (20.2 x 13.1 x 18.5 inch) Case Type: Mid Tower Net Weight: 11.3 kg / 24.91 lb Side Panel: 5mm Tempered Glass x 1 Color: White Material: SPCC Drive Bays: Accessible: 2 x 3.5" or 3 x 2.5" (Outside the chassis) Hidden: 2 x 3.5’’ or 2.5’’ (Inside the chassis) Expansion Slots: 8 Motherboards: 6.7” x 6.7” (Mini ITX), 9.6” x 9.6” (Micro ATX), 12” x 9.6” (ATX) I/O Ports: USB 3.0 x 2, USB 2.0 x 2, HD Audio x 1 PSU: Standard PS2 PSU (optional) Fan Support: Left Side: 3 x 120mm, 3 x 140mm Radiator Support: Left Side: 1 x 360mm, 1 x 420mm Clearance: CPU cooler height limitation: 180mm VGA length limitation: 280mm (With Reservoir & Radiator), 450mm (Without Reservoir & Radiator) PSU length limitation: 200mm 3 year warranty

• Open Frame Panoramic Viewing: 5 millimeter Thick Tempered Glass at Front
• 3 Way Placement Layout: Wall mount, Vertical, and Horizontal placement
• Vertical GPU Mounting: One PCI E Riser Cable included
• Vertical PSU Mounting: Vertical PSU layout when ITX Motherboard is applied
• Dismountable Modular Design: Freely Build the System from the Ground Up with Given Modular Panels, Racks, Brackets, and Pre Design Mounting Arrays

User questions & answers

Question:	Can i fit micro atx asus rog strix b360-g motherboard into thermaltake core p
Answer:	The specifications for what can fit are as follows: 6.7 in by 6.7 in mini ITX, 9.6 by 9.6 in Micro ATX, 12 inch by 9.6 inch ATX. This is directly from the book that comes with it.
Question:	Does the thermaltake core p5 allow for a corsair hydro cooler such as the h110i 280mm cw-9060026-ww
Answer:	I have the H110i and the Core P3 and the built-in lines are almost to short. The extra depth of the P5 will probably make it near impossible to get mounted.
Question:	Is the pcie riser included? if so, is it the same riser used in core p3 or core p
Answer:	According to the MFG site, it should come with the riser cable. However, I've seen many complaints about the P5 risers and possible damage to GPUs. http://www.thermaltake.com/products-model.aspx?id=C_00003030
Question:	How many hard drives can this hold
Answer:	room for 2 drives hidden in the back (either 2.5" or 3.5"), 3 visible 3.5" drives, and 4 visible 2.5" drives. the 3 visible 3.5" drives occupy the same space as the radiator/fan mounts though.

Product features

Thermaltake Core P3 Tempered Glass Edition

The new Core P3 Tempered Glass Edition Open Frame chassis comes with a 5mm thick tempered glass front panel to provide durability and a clear view of the inner components. Core P3 TG supports the latest PC hardware, AIO and DIY liquid cooling solutions. The Chassis is designed with dual GPU and PSU layout options and 3-way stand placements (wall mount, horizontal, and vertical placements) provide users unlimited flexibility when it comes to building the most advanced customized PC.

Built for Makers

By practicing the idea of “maker movement” as well as 3D printing, Thermaltake designs the open frame panoramic viewing chassis as users can do their own mods, as well as print out their ideas, using liquid cooling components, and manuals without boundaries. Users can download 3D printing accessory files on 3D Makers Microsite, printing them out to do a special mod.

5mm Thick Tempered Glass Window

The 5 mm thick front tempered glass panel guarantees the durability of the window and display your build with crisp clarity. Users can fully display every component of the system and show off their dedication and skill set with its exceptional viewing capability.

DMD – Dismantlable Modular Design

Gamers can freely build the system from the ground up with given modular panels, racks, brackets, and pre-design mounting arrays. No more unreachable screw corners or gaps and enjoys installation in a breeze with Dismantlable Modular Design.

3-Way Placement Layout

Designed for use in three different ways: Wall-mount, vertical, and horizontal placement. Users can hang it on the wall as decoration, take it to wherever they want and display the nice builds vertically or horizontally for the best viewing presentation while ensuring outstanding cooling performance.

Versatile GPU & PSU Orientation

Show off your graphic card and power supply with our special design bracket. Further, the Core P3 TG also has the support for vertical PSU layout when ITX motherboard is applied. Riser cable, AC-053-CN1OTN-C1, is Included.

Native AIO Support

The Core P3 SE is natively supported for all type of All-In-One liquid cooling solution without the need for extra bracket.

Supreme Hardware Support

Supports the mounting of 3.5” and 2.5” storage devices. Two 3.5”/2.5” drive trays are included and hidden in the back panel that offers 45mm of cable management space.

Advance Ventilation

Up to 3 120mm or 140mm fans or 420mm radiator at left side.

Product description

Title:

Thermaltake Versa N24 Black SPCC ATX Gaming Mid Tower with PSU Cover Computer Case CA-1G1-00M1WN-00



Product Description:

Perfect for the first build or the next one, the Versa N24 Mid Tower Chassis shows its horse power with a unique piping system ready for the starting line. Gain more with cooling performance, tool-free installation and options for both air and liquid cooling configurations at an affordable price. With extended GPU fitment up to 415mm lengths, build your next PC hot rod built for gaming. Designed for maximum ventilation from top to bottom the Versa N24 is a great choice, at the right price.



Key Features:

Case Type: ATX Mid-Tower Gaming Chassis

Case Dimension (H x W x D): 21” x 9.7” x 20.1”

M/B Type: ATX (12.0" x 9.6"), MicroATX (9.6" x 9.6"), Mini-ITX (6.7" x 6.7")

Side Panels: Window

Supports : Standard PS2 Power Supply

External Bay: 2 x 5.25"

Internal Bay: 2 x 3.5" or 2.5" (with HDD Tray), 1 x 3.5" (without HDD Tray)

Expansion Slots: 7

Front I/O Panel: 1x USB 3.0, 2x USB 2.0, 1x Headphone, 1x Mic Ports

Fans Included:

Rear (exhaust) : 120 x 120 x 25 mm

Clearance:

CPU Cooler Height: 155mm

VGA Length: 415mm (without front fan)

PSU Length: 200mm

Fan Configurations: (Optional)

Front:

1 x 120mm or 2 x 120mm or 1 x 140mm or 2 x 140mm

Top:

1 x 120mm or 2 x 120mm

Rear:

1 x 120mm



Radiator Configurations: (Optional)

Top:

1 x 120mm or 1 x 240mm

Front:

1 x 120mm or 1 x 240mm or 1 x 140mm or 1x 280mm

Rear:

1 x 120mm



Support

Please visit our website or search "Thermaltake Support" for any assistance.

• Top Mount I/O Ports: 1x USB 3.0, 2x USB 2.0, 1x Headphone, 1x Mic Front Ports
• Power Supply Cover: Streamline your cable management with the included Power supply cover to hide cable clutter
• Storage Options: 2x External 5.25 inches Drive Bays, 2 x 2.5 inches / 3.5 inches Internal Drive Bays (with HDD Tray) with back panel accessible hidden drive access
• Air/Liquid Cooling Configurations Options: 1 x 240mm radiator(Top/Front). 1 x 120mm radiator (Rear), 2 x 120mm or 2 x 140mm Fans locations (Top) with 2 x 120mm Fan locations (Front)
• Complete solution: Support up to 240mm radiator liquid cooling for ideal CPU cooling application, up to 415mm long graphic card (without front fan(s))

User questions & answers

Question:	Will 120mm fans fit
Answer:	Yes. Front, top, and rear.
Question:	I have a 360mm cpu cooler and a 120mm gpu cooler , both are liquid so will they fit
Answer:	The max allowed room for a liquid cooler is 240mm, so you could only fit one I suggest Lepa aquachanger 240mm. here is the link: https://www.amazon.com/gp/product/B00RDLKYIC/ref=crt_ewc_title_dp_12?ie=UTF8&psc=1&smid=ATVPDKIKX0DER
Question:	Does it come with brass standoffs and screws
Answer:	I've never owned this case before, but Thermaltake will always put standoffs. If it doesn't come with some, it would be because the location you bought it off of. I could practically guarantee they do come with them.
Question:	Is the rear exhaust replaceable? Like can you take it off and install a new one in there
Answer:	Yes. This case has 1 rear 120mm fan that can be changed out.

Product features

Versa N24 Hell Fire

Versa N24 Mid-Tower Chassis is designed for gamers to gear with the latest gaming component, offering not only style and personality but an exceptional combination of cooling, performance, versatility and adaptability to any configuration to ensure true enjoyment while in or out of the game.

Gaming-Oriented Concept

Designed for gamers, the glossy black front/top panels deliver stylish images. The heightened foot-stands at the bottom help enhance airflow, and a transparent side window offers a direct view of the inner system.

Tool-Less Drive Bay Design

The innovative 5.25” & 3.5” tool-free drive bay design minimized the hassles of installation/removal. The dual drive bay concept of “1 + 3 + 2” offers a good ratio for accessories and storage devices. 1 Accessible 5.25" + 2 Hidden 3.5" or 2.5" (with HDD Tray) + 1 Hidden 3.5" (without HDD Tray) + 2 Hidden 2.5" (with M/B Tray).

Handy I/O Port

The front-top control panel features one USB 3.0 data transfer port along with two standard USB 2.0 ports as well as HD microphone and headset jacks to grant direct access when needed.

Dust Reduction

In order to keep the interior dust free, all intake ventilation holes come with dust protection, including a removable dust filter at the bottom of the chassis.

Preinstalled 120mm Rear Fan

One 120mm rear fan preinstalled. Together with two 120mm front fan (not included) as well as two 120mm fans mounted on the top (not included) to optimize the system cooling performance for extreme airflow.

Outstanding Expandability

Users can simply build up a complete high-end water cooling solution with 240mm radiator and long graphic card up to 360mm without HDD cage. VGA maximum length is 415mm without front fan.

Advance Ventilation

Up to 2 120mm fans at front and top, and 1 at rear for maximum fan space selection.

Product description

Incorporating various high-quality components, The smart series - models are Rated from 500W to 700W - saves energy through its high efficiency of up to 86% and accommodates any mainstream build with the most demanding requirements. An embedded intelligent cooling fan delivers excellent Airflow at an exceptionally low noise level. Additionally, the single +12V rail design enables non-stop usage with stable and reliable performance. Smart Series adopt 120mm cooling fan delivers excellent Airflow at an exceptionally low noise level. Smart Series saves energy through its high energy efficiency of up to 86% and is 80 PLUS standard Certified. High quality components enable non-stop usage with stable and reliable performance, no more capacitor explosion and leakage. Single +12V output.



p/N: ps-spd-0500npcw-w short

model: sp-500ah2nkw

type: Intel ATX 12V 2. 3max.

Output capacity: 500w

color: black

dimension (H x W x D): 86mm x 150mm x 140mm pfc (power factor

correction: active pfc power

good signal: 100-500 msec

hold up time: 16msec (minimum) within 60% load input current: 8a max input frequency range: 50 Hz - 60 hz input

voltage: 100Vac – 240vac operating temperature: 5℃ to +40℃

operating humidity: 20% to 85%, non-condensing

operating temperature: -40 ℃ to +55 ℃ operating humidity: 10% to 95%, non-condensing cooling system: 120mm fan: 1800 R. P. M. 10%efficiency: 82-86% efficiency @ 20-100%

load mtbf: 100, 000 hrs minimum safety Approval: CE/CB/TUV/ UL/

fcc pci-e connector: PCI-E 6+2pin x 2

• Delivers 500 Watt Continuous output @ +40 degree. Compliance with Intel ATX 12 Volt 2.31 & EPS 12V 2.92 standards
• 80 PLUS Certified, 80percentage efficiency under typical load
• Supports PCI E 6+2pin Connectors. Active (PFC) Power Factor Correction, MTBF: 100,000 hours
• Industry Grade Protections: (OPP) Over Power Protection, (OVP) Over Voltage Protection, (SCP) Short Circuit Protection
• High Quality Components
• Equipped with a powerful +12 Volt rail, superior performance under all types of system loading
• 5 Year Warranty

User questions & answers

Question:	Will this power supply fit in a micro atx case such as a Rosewill Ranger-M case
Answer:	The best option would to grab a set of fan splitters to be safe but you should have no problems tuning 6 fans with 4 pin connectors
Question:	Will this work with US stardard 115V power
Answer:	I managed to put an Aresgame 500W PSU into an Optiplex 7010 MT (mini-tower) case. Although the mounting holes didn't match so it's not screwed in (it's kinda held in by that metal clip in the case). But yeah, 750W also might be overkill for an Optiplex 7010.
Question:	Does this power supply come with a 6 pin pci power ready to go
Answer:	ARESGAME AGV750 power supply comes with 2 pci-e cables that each with two 8pin connectors, total four 8pin pci-e connectors; and each 8pin can be split manually into 6+2pin, i.e, It can be effectively used as a single 8-pin or 6-pin pci-e connector. Please contact our customer service if you have any further question about how to get the 6 pin, we will offer you pictures/video technical support.
Question:	will this work on 220V or it's universal
Answer:	hey, dear friend, thanks for your question. our AGV750 watt power supply with 12 months full refund and 3 years limited warranty, and if you register as ARESGAME VIP on our official website and you will get: 24 months full refund and 5 years limited warranty and 10% off for your next order. looking forward to your purchase and establishing a long-term business cooperation relationship with us.

Product features

Smart 80+ White

Incorporating various components, the Smart Series – models are rated from 430W to 700W – saves energy through its high efficiency of up to 86% and accommodates any mainstream build with the most demanding requirements. An embedded intelligent cooling fan delivers excellent airflow at an exceptionally low noise level. Additionally, the Single +12V rail design enables non-stop usage with stable and reliable performance.

120mm Ultra Quiet Fan

Smart Series adopt 120mm cooling fan delivers excellent airflow at an exceptionally low noise level.

80 PLUS Standard Certified

Smart Series saves energy through its high energy efficiency of up to 86% and is 80 PLUS Standard Certified. Additionally, the Smart Series has been optimized to work with all generations of Intel’s processors to achieve maximum energy saving.

High-Quality Components

High quality components enable non-stop usage with stable and reliable performance, no more capacitor explosion and leakage.

Connectors Specification

Smart Series offers cable selection for users while powering the system at an advantageous voltage. The multiple connectors make cable installation an easy task.

Product description

Designed for PC builders who want a sleek, Custom looking case with great airflow and a crystal clear tempered glass panel – The Versa V200 TG RGB is the ultimate mid-tower. This Special RGB version comes with three 120mm 12V RGB front fans that are Dual-Mode controllable either through the front I/O panels, or by connecting to compatible ASUS gigabyte, MSI, as rock or BIOSTAR motherboards. The V200 TG RGB supports a huge range of air and liquid cooling hardware, high-end GPU and even a handy PSU cover in the basement. Specifications • Dimensions (H x W x D): 17.6 x 8.54 x 17 inch / 447 x 217 x 432 mm • Net Weight: 7.1 kg / 15.65 lb • Case Type: Mid tower • Color: Black • Case Material: SPCC • Side panel: 4mm tempered glass panel x1 • Drive Bays: Hidden: 2 x 3.5” • Expansion slots: 7 • Motherboards: 6.7” x 6.7” (Mini ITX), 9.6” x 9.6” (Micro ATX), 12” x 9.6” (ATX) • I/O port: USB 3.0 x 1, USB 2.0 x 2, HD Audio x 1, RGB button x 1 • Pre-installed fans: Rear: 120 x 120 x 25 mm fan x 1 Front: 120 x 120 x 25 mm fan x 3 • Fan Support: Front: 3 x 120mm, 2 x 140mm Top: 2 x 120mm, 2 x 140mm Rear: 1 x 120mm • Radiator Support: Front: 1 x 240mm, 1 x 280mm Rear: 1 x 120mm • Clearance: Maximum GPU length: 380mm Maximum CPU cooler height: 160mm Maximum PSU length: 170mm • Warranty: 3 years.

• Light up the system: 3 Pre-installed 120mm 12V motherboard Sync RGB fans (Sync with ASUS, Gigabyte, MSI, Asrock, and BIOSTAR 12V header Motherboards) + 1 Black fan at back
• Built-in dual-mode 12V Sync controller: Control light via I/O port, RGB Light button (16 LED modes/7 Color) or via 12V header RGB sync motherboard (Sync with Asus, Gigabyte, MSI, Asrock, and BIOSTAR 12V header Motherboards)
• 16 LED modes through I/O port RGB Light button: RGB mode, single color mode (7 Colors), breath mode (7 Colors), light off 7 Colors: red, yellow, green, cyan, blue, White, Purple]
• Clear view of PC gaming: 4mm thick Tempered Glass Side panel with standard mounting
• Built-in PSU cover: Cover all your cables for a professional look combined with a window to show off your colorful power
• Drive Bays: 3 x 2. 5" + 2 x 3. 5"
• Supports Mini ITX, Micro ATX, and ATX motherboard

Product features

16 Lighting Modes via I/O Port RGB Light Button

RGB Lighting: Mode 1

Single Color: Mode 2-8 (Red, Yellow, Green, Cyan, Blue, White, Purple)

Breath: Mode 9-15 (Red, Yellow, Green, Cyan, Blue, White, Purple)

Light Off: Mode 16

Handy I/O Port

Top-front panel features,

USB 3.0 x 1

USB 2.0 x 2

HD Audio x 1

RGB Light Button

Tempered Glass Side Window

More durable and less wear and tear, the 4mm tempered glass panel on the left side is designed to have thumb screws tightened at each corner.

Built-in PSU Cover

Full-length PSU cover with vent hole provides clean and tidy look hiding cables from view.

Tool-Free Installation HDD

Three 2.5” HDD with HDD bracket inside the case + Two 3.5” HDD with HDD tray below PSU shroud

Superior Hardware Support

Max height of CPU cooler: 160mm

Max length of dual expansion slot VGA: 330mm

Max length of PSU: 160mm

Fan Support Chart

Front: 3 x 120mm, 2 x 140mm

Top: 2 x 120mm, 2 x 140mm

Rear: 1 x 120mm

Radiator Support Chart

Front: 1 x 240mm, 1 x 280mm

Rear: 1 x 120mm

Product description

It's ideal for home-computer builders and gamers, with enough space for high-end hardware and expansion. The ample ventilation options, cleanable Air filter, and a perforated mesh bezel keep the entire system cool and dust-free. Versa H22 combines a manageable frame Size with extensive options to customize user's computer or gaming systems.



P/N: ca-1b3-00m1nn-00

Series: versa

Case Type: Mid Tower

Net weight: 4. 2 kg/ 9. 3 lb

Color: exterior & interior: Black

Rear (exhaust): 120 x 120 x 25 mm

Turbo fan (1000Rpm, 16dBA)

Drive bays: lcs upgradable: supports 1/2”, 3/8”, 1/4” water tube

I/O port: USB 3. 0 x 1, USB 2. 0 x 1, HD Audio x 1 PSU: standard PS2 PSU (optional)

Cpu cooler height limitation: 155mm

VGA Length Limitation: 315mm

• [Enhanced airflow] – perforated metal front and top panel, heightened food stands, and specially designed cable routing gap enhance airflow for maximum ventilation
• [3+3+3 drive bay] – 5. 25” x 3 + 2. 5”/3. 5” x 3 + 2. 5” x 3
• [Tool-free installation] – tool-free drive bay design minimizes the hassles of installing/removing. Tool-free mount fan can be clipped on the dust filter
• One 120mm rear fan pre-installed with the option of two 120mm front intake fans to optimize system ventilation
• Supports Mini ITX, Micro ATX, ATX Motherboard
• I/O port - USB 3. 0 x 1, USB2. 0 x 2, HD Audio x 1
• Max CPU cooler height: 155 millimeter / Max VGA length: 315 millimeter

User questions & answers

Question:	Is the power supply supposed to be included with the product
Answer:	no power supply is included
Question:	does it support optical drive
Answer:	How do you get access to the CD-ROM/optical drive with that cover on there?
Question:	Will the 980 ti which is 10.5 in long fit inside the case
Answer:	I don't have the case put I looked in to it for you. its 250mm (with HDD cage) 360mm (without HDD cage) your card is 10.5ins that 266.7mm So no it wont fit with the HDD case installed. but will fit if removed.
Question:	Is it red or blue
Answer:	Its all black, the front panel is see through. Those lights you see in the pictures are just examples of what you could add.

Product features

Versa H22

Ideal for home-computer builders and gamers, with enough space for high-end hardware and expansion. The ample ventilation options, cleanable air filter, and a perforated mesh bezel help to keep the entire system cool and dust-free. Versa H22 combines a manageable frame size with extensive options to customize user’s computer or gaming system.

Gaming Design

Designed for gamer, perforated metal mesh front and top panel to allow quick heat dissipation and rapid air intake for maximum ventilation. The heighten foot-stands at the bottom help to enhance airflow.

Tool-Free Drive Bay Design

Innovative 5.25” & 3.5” tool-free drive bay design minumized the hassels of installing/removing. Trio drive bay concept “3 + 3 + 3”, a perfect ratio for accessory and storage devices.Also, Tool-free mount fan can be clipped on the dust filter. Total 3 Accessible 5.25" + 6 Hidden 2.5" or 3 Hidden 3.5”.

Handy I/O Ports

The perforated front-top panel has implemented one data transfer SuperSpeed USB 3.0 port along with one standard USB 2.0 port, a HD microphone and headset jacks, to grand direct access when needed.

Preinstalled 120mm Rear Fan

One 120mm rear fan preinstalled. Together with two 120mm front fan (NOT included) to optimize the system cooling performance for extreme airflow.

Convenient Support

Pre-mounting holes to support motherboards up to standard ATX and CPU cooler installation, long graphic card also supported as well as Advanced Cable Management and Liquid Cooling System.

Product description

Thermaltake Level 20 MT ARGB is the premium mid tower synchronized with motherboard in the level 20 family. Level 20 MT ARGB features enlarged side panel window, ATX motherboard support and a power cover.

The Level 20 MT ARGB comes preinstalled with three 120mm 5V ARGB LED front fans and one 120mm rear fan. The front fans are addressable to deliver 16.8 million-color RGB illumination and unparalleled ventilation. This model comes ready to sync with RGB capable motherboards from ASUS, Gigabyte, MSI and ASRock.

The Level 20 MT ARGB takes our latest case innovations and wraps them in an ultra-modern style that’s utterly unique in the case market today. Stand out from the crowd with the Level 20.



P/N: CA-1M7-00M1WN-00

Case Type: Mid Tower

Dimension (H x W x D): 455 x 204 x 471mm (17.9 x 8.0 x 18.54 inch

Net Weight: 6.75 kg / 14.88 lb

Side Panel: 4mm Tempered Glass x 2 (Left & Front)

Color Exterior & Interior: Black

Material: SPCC

Cooling System:

Front (Intake): 120 x 120 x 25mm Addressable RGB fan (1000rpm, 27.2 dBA) x 3

Rear (exhaust): 120 x 120 x 25 mm fan (1000rpm, 26 dBA) x 1 Drive Bays:

Accessible: 1 x 2.5’’(HDD Bracket); 2 x 2.5”

Hidden : 2 x 3.5’’ or 2.5”(HDD Cage); 1 x 2.5”(HDD Bracket)

Expansion Slots: 7

Motherboards: 6.7” x 6.7” (Mini ITX), 9.6” x 9.6” (Micro ATX), 12” x 9.6” (ATX)

I/O Ports: USB 3.0 x 2, HD Audio x 1, RGB Switch x 1

Fan Support:

Front: 3 x 120mm

Top: 2 x 120mm, 1 x 140mm

Rear: 1 x 120mm

Right Side (In front of M/B Tray): 2 x 120mm

Bottom (On the power cover): 2 x 120mm

Radiator Support:

Front: 1 x 360mm

Rear: 1 x 120mm

Right Side(In front of M/B Tray): 1 x 240mm

Clearance:

CPU cooler height limitation: 170mm

PSD length limitation: 170mm

VGA length limitation: 260mm (With radiator on the right side), 366mm (Without radiator on the right side)

• Light up the system : 2 Pre installed 200 mm 5V MB Sync a RGB fans (Sync with as US, Gigabyte, MSI, ASROCK) +1 rear Black fan
• Built in dual mode 5V ARGB switch board : Control light via I/O port button (27 LED modes/7 Colors) or via 5V ARGB Sync motherboard
• 27 LED modes through I/O port button : Wave mode; flow mode; RGB lighting (single color); Radar mode (Red, yellow, green, cyan, blue, White, Purple); breath mode (8 Colors); full lighted mode; single color mode (7 Colors); light off
• Clear view of PC gaming : one 4 mm tempered glass with standard mounting
• Built in PSU cover : cover all your cables for a professional look
• Drive Bays : 2. 5 inches X 5 or 3.5 inches X 3 + 2.5 inches X 2
• Supports Mini ITX, Micro ATX, and ATX Motherboard

User questions & answers

Question:	what material is it
Answer:	The cable connecting the desktop to a monitor is normally not included.
Question:	I am a noob, but I don't see any slot where I can put the BD- ROM, Don't tell me it can't install an Internal Blue-Ray drive
Answer:	right out of the box this pc worked great, and the HDMI port on the video card functioned well
Question:	Do you have to turn off your computer to use HDD Docking Station, putting drives in and pulling them out, is it safe
Answer:	Yes, you can add more ram. SSD and HDD are also upgradeable.
Question:	Is this a full tower or mid tower. One part of description states full other part states mid tower
Answer:	3000 MHz DDR4
Question:	seems there is not standard speed reference? Does anyone know the max high speed? I can't compute the calculations
Answer:	Yes
Question:	does this work if i plug it in a usb wall charger, like the ones used to charge phones
Answer:	Mine came w/ 1 stick of 8GB and 1 empty slot.
Question:	How long do you think a 20,000MaH battery could power this
Answer:	This will not run Minecraft with ray tracing. You need a RTX series graphics card if you would like ray tracing in your games.
Question:	Which direction does the air flow? Does it come out the side where the VR knob is or does it enter by the VR knob
Answer:	Yes the pc comes with a keyboard and mouse

Product features

Thermaltake Commander C36 Motherboard Sync ARGB ATX Mid Tower Computer Chassis with 2 200mm ARGB 5V Motherboard Sync RGB Front Fans CA-1N7-00M1WN-00

Description:

Mid-tower case with tempered glass side panel and two preinstalled 200mm 5V ARGB front fans and one 120mm standard rear fan, supporting up to ATX MB.

Preinstalled with two 200mm 5V ARGB front fans featuring hydraulic bearing, 9 addressable LEDs and 16.8 million-color illumination to high airflow and custom system designs to show off your PC design skills.

Riser GPU Support Bracket:

Specially designed for dual GPU placement options, Commander C Series has the support for vertical graphic card layout with dual PCI-E slots design. Integrated riser GPU support bracket not only prevents the graphic card from sagging, but also helps to reduce the weight on the motherboard PCI-E slots.

Superior Hardware Support:

The Commander C36 TG ARGB has outstanding expandability with support for a tower CPU cooler with maximum height 180mm, a dual expansion slot VGA of up to 310mm in length with reservoir, and a power supply with length of up to 200mm.

Product description

View 37 ARGB mid-tower chassis involves a gull-wing window panel for a view from more than just one angle. Features to built-in two 200mm 5V ARGB LED front fans and one 120mm 5V ARGB LED rear fan which are addressable to deliver 16.8 million-color RGB illumination and unparalleled ventilation. This model comes ready to sync with RGB capable motherboards from Asus, Gigabyte, MSI and As Rock. The View 37 ARGB is built for our top-tier cooling and lighting hardware, supporting custom liquid cooling loops as well as vertical GPU layouts and RGB lighting.



Dimension (H x W x D): 525 x 261 x 538mm (20.6 x 10.3 x 21.2 inch)

Net Weight: 11.3 kg / 24.91 lb

Side Panel: L-shape transparent window

Color: Exterior & Interior: Black

Material: SPCC



Pre-installed Cooling System:

Front (Intake): 200 x 200 x 30mm Addressable RGB fan, (800rpm, 29.2dBA) x 2

Rear (Exhaust): 120 x 120 x 25 mm Addressable RGB fan, (1000rpm, 27.2dBA) x 1



Drive Bays: 3 x 3.5” or 2.5” (HDD tray) + 8 x 2.5” or 4 x 3.5” (HDD Bracket)

Expansion Slots: 8 + 2

Motherboards: 6.7” x 6.7” (Mini ITX), 9.6” x 9.6” (Micro ATX), 12” x 9.6” (ATX), 12” x 13” (E-ATX)

I/O Ports: USB 3.0 x 2, USB 2.0 x 2, HD Audio x 1

PSU: Standard PS2 PSU (optional)



Fan Support:

Front: 3 x 120mm, 3x 140mm, 2 x 200mm

Rear: 1 x 120mm, 1 x 140mm

Right Side (In front of M/B Tray): 3 x 120mm, 3 x 140mm

Bottom: 1 x 120mm, 1 x 140mm



Radiator Support:

Front: 1 x 360mm, 1 x 280mm

Rear: 1 x 120mm, 1 x 140mm

Right Side (In front of M/B Tray): 1 x 360mm, 1 x 420mm



Clearance:

CPU cooler height limitation: 180mm

PSU length limitation: 220mm

VGA length limitation: 410mm (Without Front Fan)



3 Year Warranty

• 2 WAYS LIGTING CONTROL : Press RGB Lighting Button for 3 seconds, fans will blink twice, to change the lighting control either by motherboard software or RGB Lighting Button in I/O port
• MOTHERBOARD SYNC LIGHTING : 3 16.8 million color ARGB 5V motherboard sync fans pre installed; 2 200 millimeter at front; while 1 120 millimeter at rear
• LIGHTING FROM I/O PORT : Lighting effect can be controlled by RGB Lighting Button; Total 27 modes
• GULL WING PANEL : Amazing views of the built from any angle through the enlarged transparent gull wing window panel
• VERTICAL GPU : Dual GPU vertical placement design prevents graphic card from sagging and reduces weight on motherboard PCI E slots
• VERTICAL RADIATOR VIEW : Show off RGB radiator fans with Vertical Radiator Placement Design, supporting up to 420 millimeter in length
• Supports Mini ITX, Micro ATX, ATX, E ATX motherboards

Product features

27 Light Modes via RGB Button

Mode 1: Wave Mode

Mode 2: Flow Mode

Mode 3: Single Color RGB Cycle

Mode 4-10: Radar Mode (Red, Yellow, Green, Cyan, Blue, White, Purple)

Mode 11-18: Breath Mode (Red, Yellow, Green, Cyan, Blue, White, Purple)

Mode 19: Full Lighted Mode

Mode 20-26: Single Color (Red, Yellow, Green, Cyan, Blue, White, Purple)

Mode 27: Light Off

* Press 'RGB Button' 3 seconds, fan will blink twice, to control lighting either by 'Motherboard RGB Software' or 'RGB Button'

Enlarge Gull-Wing Panel

Unique gull-wing window gives amazing views of the build from any angle.

Riser GPU Support Bracket

Dual GPU placement design prevents graphic card from sagging, as well as to reduce weight on motherboard PCI-E slots.

Outstanding Ventilation with Filters

With up to 8 case fans, View 37 ARGB has removable filter at front and bottom providing not only excellent reduction against dirt and dust, but also great airflow.

Fan Support Chart

• Front: 3 x 120mm, 3x 140mm, 2 x 200mm
• Rear: 1 x 120mm, 1 x 140mm
• Right Side (In front of M/B Tray): 3 x 120mm, 3 x 140mm
• Bottom: 1 x 120mm, 1 x 140mm

Radiator Support Chart

• Front: 1 x 360mm, 1 x 280mm
• Rear: 1 x 120mm, 1 x 140mm
• Right Side (In front of M/B Tray): 1 x 360mm, 1 x 420mm

Product description

Keep everything you love in the living room with the newest member of Thermaltake Core series – the Core G3 slim ATX chassis, specially designed for 4K virtual reality (VR) gaming system, offing an incomparable cooling performance and compatibility with style and personality. Enjoy your games, music, stream or movies all from one device.

 

Case Type: Slim ATX

Dimension (H x W x D): 454 x 140 x 371 mm (17.9 x 5.5 x 14.6 inch)

Net Weight: 4.2 kg / 9.3 lb

Side Panel: Transparent Window

Color: Black

Material: SPCC

 

Cooling System

Front (intake): 120 x 120 x 25 mm Turbo fan (1000rpm, 16dBA) x 2

 

Drive Bays: 2 x 3.5’’ or 2.5’’

Expansion Slots: 2

Motherboards: 6.7” x 6.7” (Mini ITX), 9.6” x 9.6” (Micro ATX), 12” x 9.6” (ATX)

I/O Ports: USB 3.0 x 2, USB 2.0 x 2, HD Audio x 1

PSU: SFX PSU (optional)

 

Fan Support

Front: 2 x 120mm

Top: 1 x 120mm

 

Radiator Support

Front: 1 x240mm

 

Clearance

CPU Cooler Height Limitation: 110mm

 VGA Length Limitation: 310mm (With Front Fan)

PSU Clearance Limitation: 130mm

• STAY SLIM A compact micro slim chassis design for the perfect fit at your desk or living room
• LAN PARTY READY Perfect for at home or on the go, the Core G3 includes GPU padded braces and travel foams to secure your hardware during travel
• DUAL PLACEMENTS LAYOUT Designed for horizontal or vertical layouts, the Core G3 takes both angles for even more
• FLOATING GPU DESIGN Bring your GPU power to the forefront with a custom GPU mount turning the GPU face front for an unprecedented look
• OPTIMIZE SYSTEM VENTILATION: Two 120 millimeter front fan pre installed
• HANDY I/O PORTS: USB 3.0 x 2 , USB 2.0 x 2 , HD Audio x 1
• EXPANDIBILITY : Two 3.5 inches or 2.5 inches drive bays with HDD Cage

User questions & answers

Question:	Whats the difference between the G3 and the G
Answer:	Assuming your motherboard layout is normal Yes, any size gpu will fit.
Question:	How many fans will this case come with, and what are the fan mounting options
Answer:	This case does not support CD drive installation, you would need to use a USB.
Question:	Does the side panel window seem high quality or does it look like cheap plastic
Answer:	No
Question:	Is it possible to remove the HDD and fit a 360mm rad
Answer:	it does not.

Product description

The View 31 TG Tempered Glass Mid-Tower Chassis features dual durable 4mm thick tempered glass window, riser GPU support bracket with optional PCI-e riser cable, two preinstalled 140mm Ring Blue fans with removable filters, and outstanding system ventilation. The View 31 TG supports the latest PC hardware and all high-end GPU solutions, guarantees on unparalleled expandability for high-end configurations and liquid cooling system to satisfy the market where users have opted for stylish PC chassis with advanced features and aesthetic appeal.



P/N: CA-1H8-00M1WN-00

SERIES: View

MODEL: View 31 TG

CASE TYPE: Mid Tower

DIMENSION (H X W X D): 497 x 250 x 511 mm (19.5 x 9.8 x 20.1 inch)

NET WEIGHT: 9.9 kg / 21.8 lb

SIDE PANEL: 4mm Tempered Glass x 2 (Left & Right)

COLOR: Exterior & Interior : Black

MATERIAL: SPCC

COOLING SYSTEM

Front (intake): 140 x 140 x 25 mm Riing LED Blue fan (1400rpm, 28dBA) x 1 (1000rpm, 22dBA with LNC)

Rear (exhaust): 140 x 140 x 25 mm Riing LED Blue fan (1400rpm, 28dBA) x 1 (1000rpm, 22dBA with LNC)

DRIVE BAYS:

Hidden: 3 x 3.5’’ or 2.5’’ (HDD Cage)

EXPANSION SLOTS: 8 + 2

MOTHERBOARDS: 6.7” x 6.7” (Mini ITX), 9.6” x 9.6” (Micro ATX), 12” x 9.6” (ATX)

LCS UPGRADABLE: Supports 1/2" , 3/8”, 1/4” water tube

I/O PORT: USB 3.0 x 2, USB 2.0 x 2, HD Audio x 1

PSU: Standard PS2 PSU (optional)

FAN SUPPORT

Front: 3 x 120mm, 2 x 140mm, 1 x 200mm

Top: 3 x 120mm, 3 x 140mm, 2 x 200mm

Rear: 1 x 120mm, 1 x 140mm

Bottom: 2 x 120mm, 2 x 140mm

RADIATOR SUPPORT

Front: 1 x 360mm, 1 x 280mm

Top: 1 x 360mm, 1 x 280mm

Rear: 1 x 120mm, 1 x 140mm

Bottom: 1 x 120mm, 1 x 140mm

CLEARANCE

CPU cooler height limitation: 180mm

VGA length limitation:

278mm (with HDD rack) 420mm (without HDD rack)

PSU length limitation:

180mm (With One Bottom Fan) 220mm (Without Bottom Fan)

• Tempered Strength: New Dual 4mm Thick Tempered Glass Window panels (No Holes) gives a new look with straight forward installation
• Go Vertical: Includes GPU Float bracket allows vertical mounting options for 2.5-slot GPU solutions. (Riser Cable AC-053-CN1OTN-C1 Sold Separately)
• Cool all your View: Includes 2x Ring 140mm Blue LED Fans (140mm) providing cooling and color right out of the box
• Extend the View: Dual Tempered Glass panels (both sides) Allows users even more viewing and customization for the ultimate in cable management bragging rights!
• Warranty: 3 Years

Product features

View 31 Tempered Glass

The View 31 Tempered Glass RGB / Tempered Glass Mid-Tower Chassis features dual durable 4mm thick tempered glass window, riser GPU support bracket, preinstalled 140mm Riing fans with removable filters, and outstanding system ventilation. The View 31 TG supports the latest PC hardware and all high-end GPU solutions, guarantees on unparalleled expandability for high-end configurations and liquid cooling system to satisfy the market where users have opted for stylish PC chassis with advanced features and aesthetic appeal.

4mm Thick Tempered Glass Window

With left and right 4mm thick tempered glass window, View 31 Tempered Glass guarantees the durability of the window. The enlarged window permits users to fully display and admire all components of the liquid cooling system.

Fully Modular Concept

The fully modular drive cages provide the ease of installation/removal and maximize the interior space for custom cooling loop.

Tool-less Drive Bay Design

Freely interchange the 3.5” and 2.5” hard drives to suit particular needs. Total 6 drive bays, 3 accessible and 3 hidden. The hidden drive bay guarantees expandability for more liquid cooling components.

Riser GPU Support Bracket

Designed with dual GPU placement, the riser GPU support bracket not only can prevent the graphic card from sagging, but also helps to reduce the weight on motherboard. PCI-E X16 Riser Cable (AC-053-CN1OTN-C1) is optional.

Dust Reduction

Magnetic fan filter on top simply attaches filter for dust filtration. Super fine fan filters at the bottom provides excellent protection and reduction against dirt and dust.

Outstanding Expandability

Cable management with maximum 50mm in width. CPU cooler maximum height 180mm. Dual expansion slot VGA of up to 420mm in length without HDD rack.

Preinstalled 140mm Riing LED Fans

TG RGB Version: 3 140mm RGB LED Riing Fan Pre-installed (Hardware Controlled).

3 Modes:

a. Solid Colors of Red, Blue, White, Green.

b. Cycle through 256 Colors.

c. Off.

TG Version: 2 140mm Blue LED Riing Fan Pre-installed.

Advance Ventilation

Up to 3 120mm or 140mm fans at front and top, 2 at the bottom, and 1 at rear for maximum fan space selection.

Product description

Thermaltake the tower 900 CA-1H1-00F1WN-00 no power supply ATX full tower (Black), 6X 3.5" or 2.5" (HDD cage), 2X 2.5" (HDD tray).It’s a great way for highlight components from all three sidesIn our quest for unique cases we have come across some oddities, but the Tower900 seems to be both odd and actually pretty functional at the same time.” - Hardware Canucks“The quality and craftsmanship of the Tower900 is excellent. The chassis is extremely well designed and expertly crafted. All the panels line up well, the paint is spot on and the fit and finish is very good. The color matching between the metal and plastic top panel is very good as well and the thick 5mm tempered glass panels have a very high quality look and feel to them.” -HardOCPDesigned in collaboration with Watermod France, The Tower 900 by Thermaltake represents Thermaltake’s passion for innovation, the spirit of Watemod France, and our vision to expand chassis design for enthusiasts to build into a new era of ESPORTS modding culture. The Tower 900 is the premium choice from TT Thermaltake supporting a vertical mounting design, high quality 5mm thick tempered glass panels, and unrivaled expansion capabilities for massive custom liquid cooling systems.Model: The Tower 900P/N: CA-1H1-00F1WN-00Case Type: Full TowerDimension (H x W x D): 752 x 423 x 483 mm (29.6 x 16.7 x 19 inch)Net Weight: 24.5 kg / 54 lbSide Panel: Tempered Glass x 3 (5mm thickness)Color Exterior & Interior : BlackMaterial: SGCCCooling SystemTop (exhaust) : 140 x 140 x 25 mm Turbo fan (1000rpm, 16dBA) x 2Drive Bays: -Accessible: 1 x 5.25’’ -Hidden: 6 x 3.5’’ or 2.5’’ (With HDD Cage) 2 x 2.5’’ (With HDD tray)Expansion Slots:8Motherboards: 6.7” x 6.7” (Mini ITX), 9.6” x 9.6” (Micro ATX), 12” x 9.6” (ATX) , 12” x 13” (E-ATX)I/O Port: USB 3.0 x 4, HD Audio x 1PSU: Standard PS2 PSU (optional)Fan Support Left Side: 4 x 120mm , 4 x 140mm Right Side: 4 x 120mm , 4 x 140mmTop: 2 x 120mm , 2 x 140mmRear: 2 x 120mm , 2 x 140mm HDD Cage: 1 x 120mm , 1 x 140mmRadiator Support Left / Right Side: 1 x 480mm , 1 x 560mmClearance CPU cooler height limitation: 260mmVGA length limitation: 400mmPSU length limitation: 220mm

• Supports Mini ITX, Micro VAX, ATX, E ATX Motherboard
• Dimensions: 16.7" W x 19" D x 29.6" H | Net Weight: 54 lb
• Designed for high end gaming system compatibility; I/O Port USB 3.0 x 4, HD Audio x 1
• 5 millimeter thick tempered glass window with Stunning Viewing. PSU : Standard PS2 PSU (optional)
• Eliminates the issue with “GPU SAG”. Vertical mounting of multi GPU configurations on an E ATX platform
• Dismantlable Modular Design: freely build the system from the ground up with given modular panels, racks, brackets, and pre design mounting arrays
• Supporting dual loop liquid cooling systems

User questions & answers

Question:	Does anyone have the dimensions for the glass panels? Trying to get creative with them
Answer:	Hello,Front panel glass is (LxWxD) 22 3/4 x 15 1/2 x 27 3/8 InchesSide panel glass is (LxWxD) 22 3/4 x 10 1/2 x 25 Inches
Question:	How do I get the liquid coolant system? And does it come with all the parts needed to put it together
Answer:	You buy the liquid coolant system you want that will fit in it. It comes pretty much put together... the cooling system in the photo doesn't come with the case.
Question:	where will optical drives be mounted
Answer:	I like this case but it is no go without at least 2 5.25" externally accessible drive bays for DVD/Bluray. In addition, there is no where to mount a USB 3.1 Gen 2 5.25 front panel. It's like they designed in everything and forgot about 5.25" accessories or something.
Question:	What all come with this tower what does it include
Answer:	It came with case screws and extra parts for the side panel release machanism (I think that's what it is). It works best with thermatakes reservoir and pump combo otherwise you will need to create a custom mount.

Product features

The Tower 900

Designed in collaboration with Watermod France, The Tower 900 by Thermaltake represents Thermaltake’s passion for innovation, the spirit of Watemod France, and our vision to expand chassis design for enthusiasts to build into a new era of Esports modding culture. The Tower 900 is the first close frame chassis but designed with an open view among Thermaltake’s case category. It is the premium choice from TT Thermaltake supporting a vertical mounting design, high quality 5mm thick tempered glass panels, and unrivaled expansion capabilities for massive custom liquid cooling systems.

5mm Thick Tempered Glass Window

The large tempered glass panels feature 5mm thickness, and serve to simultaneously protect and showcase all components in the build.

Dismantlable Modular Design

Enables user to freely build the system from the ground up with given modular panels, racks, brackets, and pre-design mounting arrays.

Modular Drive Bay Design

1+6+2 modular drive bay design allow users to easily install up to one 5.25”, six 2.5”/3.5”, (with HDD cage) and two 2.5” (with HDD tray) storage devices. The removable drive device racks give users plenty of flexibility to gain maximum interior space needed for maximum cooling performance and proper cable management improving overall case ventilation.

Handy I/O Port

The top-front control panel features four USB 3.0 data transfer port along with HD microphone and headset jacks to grant direct access when needed.

NO GPU SAG

The Tower 900 eliminates the issue with 'GPU SAG' allowing vertical mounting of multi-GPU configurations on an E-ATX platform.

Superior Expansion

The Tower 900 supports motherboards up to standard E-ATX, tower CPU coolers with a maximum height of 260mm, and multi-GPU configurations, vertically mounted, up to 400mm in length.

Unparalleled Cooling Ability

Supporting up to dual 560mm liquid cooling radiators, cooling possibilities just got real.

Extreme air/liquid cooling systems

The right side and left side of the case are designed with various mounting points for radiators to provide proper space and placement when building DIY/AIO configurations.

Product description

Redefine your cooling expectations with the Thermaltake Core W200 XL-ATX Super Tower Chassis. Double down with Dual-System Capabilities allowing users to install completely separate systems in a Back-to-Back configuration. Designed for a Premium level of expandability; for both Air and Liquid cooling configurations, with a distinctive design from standard chassis. With no screw unturned, the W200 is fully modular and comes fully unassembled allowing users flexibility for replacement of any panel. Gain more with extended motherboard support and extreme cooling options to accommodate users who need ideal clearance and cooling. Expand the limits with the stackable Core P200 Pedestal (Sold Separately) allowing externally-modular upgrades for even more cooling and power capabilities. Dive into a new world of possibilities with the Core W200 from Thermaltake.

• DUAL SYSTEM CAPABLE: Designed to accommodate completely separate systems/motherboards/power supplies/VGA cards/ main component in a Back-to-Back configuration
• FULLY MODULAR/ DISMANTLE DESIGN: Provides multiple configurations and flexibility for PC Enthusiasts with a fully breakdown construction design
• DUAL MOTHERBOARD & I/O PANELS SUPPORT: Covering a wide range from Mini ITX to XL-ATX motherboards/ 4x USB 3.0 with HD Audio ports for convenient front panel access for each system
• LARGE ARYLIC WINDOW: Equipped with a Large, 3/16" thick acrylic window improving overall structure support and crystal clear viewing
• EXTREME WATER COOLING SYSTEM: Support up to 2x 600mm radiator applications with various cooling configurations for full custom liquid cooling builds
• EXTREME STORAGE: Expand your cooling options even further with Hidden SSD/HDD back panel locations and perforated back side panel allows additional airflow.
• INTERCHANGEABLE LED LIGHTING: Designated LED strip mounting on Front panel offers interchangeable LED strips to match any color theme
• WARRANTY: 3 Years

User questions & answers

Question:	Can you fit x2 rtx 2080ti kingpin in sli
Answer:	No!
Question:	Can I swap window to any side of the case from thermaltake core w
Answer:	No, it did not come with a knife or any application tools. However, I did find it to go on easily without issue. The small bubble I did have I was able to push out with my finger.
Question:	Where can we order more hd trays and cages? (i think the tray is ps-d) can you put these inside the smaller add-on case
Answer:	Hi and good day Marie, Yes, they have a 1 year worldwide warranty. https://www.otterbox.com/en-us/faqs.htmlHave a nice day. Dennis
Question:	I should anticipate cutting the W100 if I want to do cable management in the actual cable management section correct? No word on if they fixed that
Answer:	Hi Jon, outside dimensions are,3 1/16" wide and 6 1/16" tall. These measurements are with case installed on phone. The case is great and of good quality. Highly recommended.

Product features

Core W200 Super Tower Chassis

Thermaltake presents the latest TT Premium product line which follows the core values of Excellent Quality, Unique Design, Diverse Combinations and Boundless Creativity. Under this product line is the new Core W Series – Core W200 and Core WP200 super tower chassis with the Core P200 pedestal chassis – to deliver versatility in different superior looks.

Core P200 Pedestal Chassis

Extend your cooling expectations with the Thermaltake Core P200 Pedestal. Designed for the Core W200 chassis, the P200 adds more expandability to users who is looking for additional cooling and power performance. Separate or super charge your system configurations with an optional PSU mount. Gain more cooling performance with fan/radiator brackets that offer the support for 8 x 120mm or 8 x 140mm solutions or isolate and free up the main chassis space with the storage rack support. Dive into a new world of possibilities with the Core P200 Pedestal from Thermaltake.

Core W100 Super Tower Chassis

Thermaltake presents the latest TT Premium product line which follows the core values of Excellent Quality, Unique Design, Diverse Combinations and Boundless Creativity. Under this product line is the new Core W Series – Core W100 and Core WP100 super tower chassis with the Core P100 pedestal chassis – to deliver versatility in different superior looks.

Core P100 Pedestal Chassis

Extend your cooling expectations with the Thermaltake Core P100 Pedestal. Designed for the Core W100 chassis, the P100 adds more expandability to users who is looking for additional cooling and power performance. Separate or super charge your system configurations with an optional PSU mount. Gain more cooling performance with fan/radiator brackets that offer the support for 4 x 120mm or 4 x 140mm solutions or isolate and free up the main chassis space with the storage rack support. Dive into a new world of possibilities with the Core P100 Pedestal from Thermaltake.

DMD - Dismantlable Modular Design

Being the first chassis with a ground up build it yourself design, the Core WP Series is a great new challenge for makers to start from zero by putting every piece together to complete a high-end system. Take advantage to include high-end, maximum capacity, cooling allotment without the reduction of GPU length limitations when incorporating liquid cooling expansion for the ultimate in cooling performance.

Workstation Concept

With more than 20 drive trays and 10 PCIe slots, the Core WP Series can be used as another workstation for technical or scientific purposes, holding data or hosting a number of different features between computers. Compatible with the latest Intel processors and AMD/Nvidia graphics cards, the Core W Chassis delivers exceptional performance and creates effective work environment.

Superior Expansion

Designed for high-end gaming systems and workstation compatibility, the Core WP Series modular drive racks allow makers to easily install up to more than twenty data storage devices, a dual slot VGA of up to 635mm in length, and a tower CPU cooler as high as 200mm. Even with a high-wattage PSU stretching to 220mm in length, there is still plenty of space for cable management. Moreover, a 360mm radiator can be installed in the front of the chassis, delivering superior cooling performance.

Outstanding Ventilation

The Core WP Series unparalleled cooling ability offers fan brackets with various mounting points to support any type of cooling you can dream of including DIY/AIO liquid-cooling systems and air-cooling units. Fans can be mounted anywhere inside the chassis: support for up to three 140mm fans at the front and a rear 140mm fan guarantees excellent airflow capabilities; three large 200mm fans on the top panel as well as three 140mm fans at the bottom, while there is still room for 120mm, 140mm, and 200mm fans on both sides.

W200 Super Tower

Radiator Supporting Diagram.

W200 Super Tower

Fan Supporting Diagram.

W100 Super Tower

Radiator Supporting Diagram.

W100 Super Tower

Fan Supporting Diagram.

P200 Pedestal

Radiator Supporting Diagram.

P200 Pedestal

Fan Supporting Diagram.

P100 Pedestal

Radiator Supporting Diagram.

P100 Pedestal

Fan Supporting Diagram.

Product description

The S100 Tempered Glass Snow Edition Micro Chassis combines sophistication, elegance, and simplicity and is built with modern steel construction. Based on the key features of S Series chassis TG, the S100 TG Snow is designed to be even more compact and is manufactured with one tempered glass window on the left for a stunning view and one preinstalled 120mm standard fan at the rear for fundamental ventilation. The flexibility is limitless for high-end components. The S100 TG Snow Micro Chassis is a great fit for users who are looking for a budget friendly and stylish chassis.P/N: CA-1Q9-00S1WN-00SERIES: S SeriesMODEL: S100 TGCASE TYPE: Micro CaseDIMENSION (H X W X D):411 x 220 x 441 mm(16.18 x 8.66 x 17.36 inch)NET WEIGHT: 6.1 kg / 13.45 lbs.SIDE PANEL: 4mm Tempered Glass x 1COLOR: Exterior & Interior: BlackMATERIAL: SPCCCOOLING SYSTEM:Rear (exhaust):120 x 120 x 25 mm fan(1000rpm, 16 dBA)DRIVE BAYS: -ACCESSIBLE: 2 x 3.5“ or 2 x 2.5” (HDD Rack)-HIDDEN: 2 x 2.5” (HDD Bracket)EXPANSION SLOTS: 4MOTHERBOARDS: 6.7” x 6.7” (Mini ITX), 9.6” x 9.6” (Micro ATX)I/O PORT: 1 x USB 3.0, 2 x USB 2.0, 1 x HD AudioPSU: Standard PS2 PSU (optional) FAN SUPPORT:Front: 2 x 120mm, 2 x 140mmTop: 2 x 120mm, 2 x 140mm, 1 x 200mmRear: 1 x 120mm,RADIATOR SUPPORT:Front: 1x 240mm, 1 x 280mmTop: 1 x 240mm, 1x 280mmRear: 1 x 120mmCLEARANCE: CPU cooler height limitation: 165mmPSU length limitation: 160mmVGA length limitation: 330mm

• [SLIM AND COMPACT] - Full metal construction around the body with sleek front panel design, demonstrating a slim and compact design style
• [4mm THICK TEMPERED GLASS PANEL] - Tool free door lock design, which s durability and style
• [BUILT-IN WINDOWED POWER COVER] - Equipped with a PSU cover with a ventilated design to improve airflow and hide those unsightly cables
• [DUST REDUCTIONS] - A handy magnetic fan filter on the top and on the base of the chassis to help dust filtration and particulate protection
• [DRIVE BAY] - 2 x 2. 5"/3. 5" with HDD Rack + 2 x 2. 5" with HDD Bracket behind MB Tray
• One 120mm Rear Fan Pre-installed
• Supports Mini ITX, Micro ATX Motherboards

User questions & answers

Question:	can you lay case on its side and place monitor on top of it
Answer:	It’s not designed that way no.
Question:	Can it fit the big 3 fan Graphics cards
Answer:	As long as it has a maximum length of 315mm
Question:	Can a powercolor red devil graphics card fit in this case
Answer:	If its a 3 fam card then see the length of it and the length capacity of this case
Question:	Does msi intel b250 work with this
Answer:	This case is designed to fit micro-ATX motherboard.

Product features

Slim and Compact Design

The Thermaltake S100 TG is constructed with steel panels offering lasting durability and timeless aesthetic.

Product description

Thermaltake CL-F015-PL20BL-A 200mm Pure Series Quiet High Airflow Case Fan The Thermaltake Pure 20 fan comes with reliable, stable performance and gorgeous vibrant style. Available in 200mm, the Pure 20 fan offers the perfect balance of silence, style and efficiency. P/N: CL-F015-PL20BL-A Fan Dimension: 200 x 200 x 30 mm Started Voltage: 9. 0 V Rated Voltage: 12 V Rated Current: 0. 2 A Power Input: 2. 4 W Fan Speed: 800 R. P. M Max. Air Pressure: 0. 996 mm-H2O Max. Air Flow : 129. 639 CFM Noise: 28. 2 dBA Bearing Type: Sleeve Life Expectancy: 30, 000 hrs, 25℃ Connector: 3 PIN Weight : 304. 4 g

• High Performance: 200x30mm thick for high air pressure and airflow
• Enhanced Airflow: Fan blade designed to focus airflow and reduce noise, creating a torrent of air without creating excess noise
• Offers the Perfect Balance of Silence, Style and Efficiency
• Long Life Sleeve Bearing: long life bearing offers better reliability and extends life span
• Easy to install : Shaved frame allow more installation, specially the chassis from Thermaltake
• LED version available: Pure 20 series are available in LED version, adding cooling aesthetics to your chassis

User questions & answers

Question:	Will these fans work with a 3 pin fan controller to decrease or increase the speed of the fan, i am looking to use nzxt sentry mesh fan control
Answer:	It has 3 pins on my TT case.. however this case is approx 2 years old, has 3 identical 20 cm dia. fans, and the top one started to rattle. It was either faulty, or it failed prematurely but it did not sustain 30,000 work hours. THe rattling is not very persistent, but it is apparent there is some lose play on the bearing/shaft. The other 2 are still quiet. So I ordered a new one from Amazon for 14.99.
Question:	Is this a brushless fan
Answer:	Yes, this fan is indeed brushless and has sleeve bearings. Life expectancy is 30,000 hours. Hope this helped. So far it has exceeded my expectations. Seems to be a great addition to my case.
Question:	what is the length from screw hole to screw hole
Answer:	The center of the screw holes are exactly 6 and 1/16 inches apart according to my micrometer. I know as I've laser cut an acrylic case cover to fit the fan precisely.
Question:	Does this fan have a 3 pin connector or 4 pin
Answer:	It had a 3 pin coming out of the fan and then a 3 pin to 4 pin adapter

Product features

Thermaltake 200mm Pure 20 Series Black 200x30mm Thick Quiet High Airflow Case Fan with Anti-Vibration Mounting System Cooling CL-F015-PL20BL-A

Description:

High performance enduring case fan

The Thermaltake Pure 20 fan comes with reliable, stable performance and gorgeous vibrant style. Available in 200mm, the Pure 20 fan offers the perfect balance of silence, style and efficiency.

High Performance:

200x30mm thick for high air pressure and airflow . Pure 20 fan is designed to great silently, so user can keep his mind focused on the task at hand without bothering.

Enhanced Airflow:

Fan blade designed to focus airflow and reduce noise, creating a torrent of air without creating excess noise.

Features:

Long life sleeve bearing: Long-life bearing offers better reliability and extends life span.

Easy to install: Shaved frame allow more installation, specially the chassis from Thermaltake.

LED version available: Pure 20 series are available in LED version, adding cooling aesthetics to your chassis.