10 best oem 120mm fans

Product description

Gentle Typhoon 120x120x25mm 2150 RPM PWM fan #D1225C12B6ZPA



The Gentle Typhoon 120 mm fan series produce especially high static pressure combined with optimized fan blade design. They are fitted with double ball bearing and boast a life span of up to 100,000 hours at 35°C. To further reduce noise, a newly developed motor with drive train, disposing a special double vibration reduction structure, is deployed. Added dampening rings further reduce vibrations effectively.



High Performance

The Gentle Typhoon achieves high airflow volume and low noise with the newly designed impeller, enabling silent cooling of the latest devices which run very hot.



Silent Operation

The Gentle Typhoon has a different type of tone. The fan propeller is designed to reduce the disturbing frequency fan noise to human ears.



Innovative Technology

The newly designed motor and motor support mechanism of the Gentle Typhoon uses a double vibration reduction structure. The new support mechanism uses coil dampers to greatly reduce vibration.



Specifications

Fan Speed: 900 - 2150 RPM

Fan Noise: 15 - 34 dB max

Air Flow: 20 - 68 CFM

A: 0.13

Voltage: 12V

Bearing Type: Double Ball

MTBF: 100,000 @35C / 60,000 @60C

Connector: 4 Pin PWM

This is the OEM version, comes in standard non-retail box, fan only, no accessories.

• The GentleTyphoon achieves high airflow volume and low noise with the newly designed impeller
• The fan propeller is designed to reduce the disturbing frequency fan noise to human ears
• The newly designed motor and motor support mechanism of the GentleTyphoon uses a double vibration re
• OEM version, fan only
• 4pin PWM fan, 900-2150RPM

User questions & answers

Question:	how long is the cable (4 pin). Does the cable come with the plug for the motherboard or bare wires
Answer:	The cable is 12" and it does come with a (4 pin) motherboard connector.
Question:	I just bought this fan I would like to know if this is a good fan for my gpu radiator I find the stock very loud at full speed
Answer:	I really like these fans. Great air flow but quiet for the CFM being pushed. I have a box of other fans that didn't make the cut, but these did. Still, I'd recommend PWM control to keep quieter when max cooling isn't needed.
Question:	Are these fans 3-pin or 4-pin
Answer:	Connector: 4 Pin PWM
Question:	Are these legit gentle typhoons? I thought they were discontinued
Answer:	Yes, we get them direct from Nidec, Scythe USA used to sell them retail but no longer do.

Product description

Case cooling is becoming more essential These days. The better airflow inside your system, The cooler and more stable system you will get.

From the Manufacturer

From the Manufacturer



PRODUCT FEATURES



PRODUCT SPECIFICATIONS

• Air flow - 44.73 CFM. Noise level - 23.7 decibels
• 4 IN 1 Value Pack
• Higher air flow to enhance cooling performance
• Ultra silent operation at 19 dBA
• Economic solution for perfect performance
• RoHS compliance for protecting the environment

User questions & answers

Question:	Is the 92mm size a measure of the physical plastic, so that it's 90mm from screw to screw
Answer:	The size is the actual outside measurements of the housing. A 92mm fan has holes on 82.5mm centers and a 120 mm fan has holes on 105mm centers. I have a Thermaltake case with room for a 120mm fan, but the widest holes are on around 93mm centers that don't fit any readily available fan that I have found except these. My 120mm version of these has a second set of holes on the output side on about 93mm centers that work in this case. I stocked up while they are available.
Question:	I would like to use this fan to help cool a rv fridge. which two wires should I use to connect it
Answer:	Just remember your RV's (or car's) "12 volts" is actually higher than 12 volts. Case fans, LED lights, anything with a 12v wall-wart all take exactly 12volts. Depending on what it is, 13 to 14 volts plus might not be a problem, but to play it safe I'm using a "Buck Converter" to provide up to 3 amps of 12 volts for my LED's and a Blu-ray player. Not sure if it would be needed for these fans, my guess is they will work fine without it, but may not last as long being constantly fed higher voltages than they're rated for.
Question:	what is the cfm
Answer:	Newegg lists CFM at 44.73 for the 120mm case fan. I believe it's accurate.
Question:	what adapter do i need to connect these to my power supply? and can i connect all on the single cable
Answer:	I purchased the 140 mm, though I would assume they should be the same. the fans themselves are 3 pin if you are going to attach them directly to your motherboard but they also come with 3 pin to molex adapters (which I used) in order to connect them directly to the power supply. I was able to attach two fans in series to one of my power supplies molex strips.

Product features

Cooler Master Sleeve Bearing 120mm Silent Fan for Computer Cases

Features:

• Silent operation for case cooling
• Higher air flow to enhance cooling performance
• Fan Dimensions (L x W x H) 120 x 120 x 25 mm / 4.7 x 4.7 x 1 inch
• Fan Rated Voltage 12V DC
• Fan Rated Current 0.07 A
• Fan Speed 1200 RPM ± 10%

Product description

ARCTIC offers innovative solutions incessantly - changing impossible user requirements into new. Always focused on our customers, ARCTIC is devoted to deliver excellence through a strong dedication and a high sense of commitment. In light of the ever-changing consumer landscapes, we aspire to continue to expand and diversify our products and solutions. From computer cooling and peripherals to audio and digital home entertainment, we strive to enrich people's lives by creating innovative, user friendly yet affordable products with a great value of benefit. For us value for money is a key factor - a constant our customers rely on.

• INNOVATIVE DESIGN: Design of fan blades improves airflow and facilitates efficient ventilation, impeller was designed with a focus on minimzing the noise level yet delivering the desired airflow and pressure
• TWO WAY INSTALLATION: Blow warm air out of the case, draw cool air into your case
• LONG SERVICE LIFE: The Fluid Dynamic Bearing comes with an oil capsule that avoids lubricant leakage, thus this bearing is as quiet as a sleeve bearing but comes with a higher service life
• SAVE YOUR MONEY WITH THE FIVE PACK: By buying this product you will receive five F12 Standard Case Fans, thus saving your money
• TECHNICAL DATA: Fan speed: 1350 RPM, Airflow: 53 CFM/90.1 m³/h (@ 1350 RPM), Noise Level: 0.3 Sone (@ 1350 RPM), Pin: 3-pin

User questions & answers

Question:	Does these have PWM
Answer:	No, please consider F12 PWM Rev.2 or F12 PWM PST. -Justin@ARCTIC
Question:	Is it 4 pin or 3 pin? The earlier answer seems to be guessing. 3 pin is PWM, and 4-pin is both PWM and measured RPM (tachometer pulses) as feedback
Answer:	there are different versions of each type of fan (P or F series) and the different sizes. 3 pin (usually) means voltage control, 4 pin (most of the time) runs in pwm mode. no difference in operating (one better than the other), as long as the board/fan controller recognizes the fan properly, and 3 pins transfer rpm as well. but fan rpm controlled by voltage seems to be a bit smoother at the lower end (~500 rmpand lower), versus the pwm one. then again, the "normal" F/P fans with pwm (0.3 sone) usually allow for lower minimum rpm (down to ~200) versus the silent type about ~350 (0.08 sone)
Question:	What is the difference between Rev. 2 and Rev. 1 - I can't find the differences on their site. Thank you
Answer:	Hi,The Rev 1 is now the PWM PST fan and comes with a PST adapter to add more fans to the same PWM Signal. The Rev 2 is the same fan but without the PST adapter. Best regards,Jens
Question:	Static Pressure? can't seem to fine it any where online
Answer:	Air Flow: 74 CFM / 126 m³/h (@ 1,350 RPM)Noise Level: 0.3 Sone (@ 1,350 RPM)This is from URL: http://www.arctic.ac/us_en/arctic-f12-pwm-pst.htmlThe included manual / instructions say noting but "high static pressure"

Product features

Long Service Life

The Fluid Dynamic Bearing comes with an oil capsule that avoids lubricant leakage. Thus this bearing is as quiet as a sleeve bearing but comes with a significantly higher service life.

Innovative Design Enables Quiet and Efficient Ventilation

The innovative design of the fan blades improves the air flow and facilitates a highly efficient ventilation. The impeller was designed with a focus on minimzing the noise level yet delivering the desired airflow and pressure.

Two Way Installation

You can either blow warm air out of the case or draw cool air into your case.

Highly Efficient

The ARCTIC F12 Case Fan is the ultimate PC-Cooler solution.

Product description

Rosewill RFTL-131209B 120mm Blue LED Cooling Case Fan for Computer Cases

• Fan Size: 120mm
• Bearing Type: Fluid Dynamic
• RPM: 2000RPM +/- 10%RPM
• Air Flow: 59.8 CFM
• Noise Level: 36 dBA

User questions & answers

Question:	Is it a 3 pin
Answer:	Mine burned out after a week in my computer fan still works no light , ill never buy it again, chalked it up as a learning lesson.

• 1.Eight individually high quality red LEDs line Each fan hub, creating mesmerizing red lighting.
• 2.A translucent 120mm fan blade provides high airflow and static pressure while letting your red led lighting shine through.
• 3.Wide Compatibility:The most commonly 120mm size for computer case.Compatible 3-pin connector for mainboard and power supply that also works with 4-pin headers.
• 4.Hydraulic bearing with longer service life to reduce noise/oil overflow and improve heat dissipation efficiency.
• 5.What You Get:SR12-RD3 Case Fans, our worry-free 12-month warranty and friendly customer service.

User questions & answers

Question:	Hey so i bought the uphere rgb fans for $17.99 & they didn' come with a controller. all the reviews had a fan & remote on youtube & i'm just confused
Answer:	Yes, the lid can close with the label tabs on the hanging folders. This is a very sturdy file box. When the lid is closed and locked, the box can be easily picked up by the handle. I originally ordered 2 boxes and was so please with the quality that I ordered 2 more.
Question:	Can the colors be changed? made to a solid color? Software or a controller
Answer:	yes I do it all the time. Regular 8.5 X 11 inch will fit.
Question:	where do you connect the fan? to the mobo's 4pin connector or psu connector
Answer:	Plastic on the back hinges pivoting on a metal rod.

Product features

SR120 series blue LED case fan

• 1. Enhanced frame structure, reducing turbulence and noise while increasing overall efficiency.
• 2.8 silicone shockproof pads ensure that the fan will reduce the shock generated with the chassis when it is running.
• 3. Provides full blue lighting for your pc, achieving magical lighting effects.
• 4. Self-lubricating bearings and friction-reducing substances reduce operating noise and improve thermal efficiency.
• 5.The design of the fan frame reduces the noise output of the fan thanks to it's rigid frame.

Good heat dissipation performance

9 fan blades effectively improve the diversion effect, prevent vibration and keep silent. Diversion design for efficient heat dissipation.

High Quality Bearing

Hydraulic bearing with longer service life to reduce noise and improve heat dissipation efficiency.

Brightness LED

Red LED keeps your system cool. Maintain color and brightness uniformity. The lighting effect is visible from all directions and adds aesthetics to the chassis.

Specification:

• Model:SR12-RD3
• Size(mm):120*120*25mm
• Connector:3-pin+molex 4-pin
• Fan Speed:1150RPM
• Airflow:41.2CFM
• Acoustical Noise:19.9db
• Rated Power: 1.5W
• Weight:130g
• LED Color:Blue LED

Product description

Thermaltake Pure 20 ARGB sync radiator fan TT Premium Edition features compression blades, hydraulic bearing, and a 16. 8 million colors LED Ring with 9 addressable LEDs that is ready to sync with 5V RGB Capable motherboards from Asus, Gigabyte, MSI and as rock. Users can easily switch RGB lighting effects using the ARGB controller that is included in the packet, or by ASUS AURA Sync, gigabyte RGB FUSION, MSI Mystic Light Sync and as rock polychrome software. Pure 20 ARGB sync radiator fan delivers 16. 8 million-color RGB illumination and unparalleled ventilation.

• Synchronized your gaming station: Control fan lighting with select 5V addressable RGB motherboards; Supported motherboard software includes as US aura Sync, Gigabyte RGB FUSION, MSI Mystic Light Sync, and ASROCK polychrome; Air flow: 56.45 CFM; Noise level: 25.8 decibels
• Analog ARGB controller: low profile controller included for users without RGB Cable motherboards. Choose from 8 Preset colors (red, yellow, green, teal, blue, White, Purple, and rainbow), 7 LED modes and off mode (wave, full light, RGB spectrum, off, flow, ripple, pulse, and blink), and 4 LED speeds
• Rib LED Ring: Nine 16. 8 million colors addressable LEDs provide balanced lighting coverage and brightness
• 9 fan blade design: Designed for balanced air flow and static pressure, Perfect for case or radiator applications
• Cooling expansion: Maintain unified LED lighting when pairing with the water 3. 0 ARGB Series All in 1 coolers for push pull radiator configuration
• Silent & efficient: Feature hydraulic Bearing self lubricates with a friction reducing substance for quiet operation without sacrificing performance
• Anti vibration: Anti vibration rubber pads promotes silent operation and protection
• 3 year

User questions & answers

Question:	how do I use 3 fans and a thermaltake UX 100 on the same rgb controller
Answer:	Dear customer, Thanks for your quetion and letting us help you know our Radioddity GD-77S Digital / Analog Two Way Radio. if you need match with other radio , you need program it and change to the same frequency. Have a nice day! Best regards. Radioddity Support Team
Question:	This might be a bit of a stupid question but which part of all the fan stuff do i connect to the addressable rgb header on the motherboard? new to rgb
Answer:	Dear customer, Thanks for your quetion and letting us help you know our Radioddity GD-77S Digital / Analog Two Way Radio. Don't worry, all of our Radioddity ham DMR radio have hassle-free 12 month warranty. If there is any problem under warranty, please feel free to contact us by [email protected], we will take full responsibility. Have a nice day! Best regards. Radioddity Support Team
Question:	It is compatible with thermaltake sync controller? i mean the non plus version
Answer:	Dear customer, Thanks for your interest in our GD-77S ham radio. Two-Way Radio User Manual is available free at: ❤️❤️http://s3.amazonaws.com/s3.image.ro/download/Manual/Radioddity/GD-77/Radioddity%20GD-77S%20Manual-English%202018.02.13.pdf ❤️❤️ Please let us know if there are any question or concerns. Our customer support team is standing by to assist you. We always stand behind our products. Have a nice day! Best Regards Radioddity Support Team
Question:	Can i hook up 6 fans with one argb header
Answer:	This unit only measures swr and power output of the radio, it is not a tuner, use it to measure swr on each of the bands you use and if swr is good, you dont need to tune, if swr is bad you will need to buy a uhf vhf tuner to put between antenna and swr meter on your coax

Product features

16.8 Million Colors LED Design

Featuring 9 addressable LEDs,great light coverage,and uniform color and brightness,the built-in LED ring can paint your build with 16.8 million colors

Synchronize Your Gaming Station

Pure ARGB fans are available in 12cm, 14cm, and 20cm to fit almost any case, radiator, or AIO cooler

• Premium " SOLAR ECLIOSE " model Led case Fan for Computer Cases, CPU Coolers. led Double Ring Lighting Design.
• As a excellent LED cooling system, the fan can provide a very gentle and dreamlike expression by emitting soft, constant, and bright led light.
• The case fan With high quality Hydraulic Bearing, working life is up to 40000 Hrs under high speed rotation condition.
• Excellent noise cancellation design, 8 Anti-Vibration pads reduce resonance between fan blades and PC case,working noise is as low as 20 dBA.
• Easy to Install: easy to setup and operate without a second hand.

User questions & answers

Question:	Do these have molex connector or just the PWM connector
Answer:	it is at fixed speed 1200/m
Question:	Help! Led's only stay on for few seconds at startup and then go off??? Fan's still work but no lights
Answer:	No. I’m using the header connectors with no issues.
Question:	What is the color temperature for the blue
Answer:	These have 2 connectors attached. One is a 4pin molex passthrough (male/female). The other is a 3 pin header connector (.1"/2.54mm)
Question:	Do they blow either direction? Intake or outtake
Answer:	Mine came with 4 screws. Not enough for all fans but it's something i suppose. i wasn't expecting screws anyways. The price of screws is negligible so not a big deal.

Product features

Magical LED Ilumination

• Semi-transparent black fan housing with 12 White LED provides an excellent visual effect.
• Dual LED ring maintain color and brightness uniformity. The lighting effect is visible from all directions and adds aesthetics to the chassis.

High Quality Bearing

• Equipped with rubber pads and hydraulic bearing, which greatly reduce operating noise and improves efficiency.
• Long life sleeve bearing for longer life expectancy.

Superior Cooling Performance

• Balanced airflow and air pressure designed for perfect compatbility with your case or cooler.
• Provides improved performance over standard case fans.
• Strong air flow to fortify cooling efficiency.

Specification：

• Size:120*120*25 mm
• Weight:130g
• Cable length: 60cm

Product description

Bears Fan Adapter 140mm Black. Fan adapter 140mm is design to mount a 140mm fan to a 120mm pre-drill hole on the computer case. Or it can be used on a 120mm fan to mount on a 140mm pre-drill holes on the computer case. The adapter has a funnel design to channel airflow smoothly. Customer Service: Supportatbgears.com or call 510-657-7252. RMA Service: RMAatbgears.com or call 510-657-7252.

• Convert 140mm to 120mm mounting
• Convert 120mm to 140mm mounting
• The Fan Adapter funnel design will channel airflow through the 120mm ventilation hole on the chassis.
• 4 screws included

User questions & answers

Question:	Will this fit in my situation? 140MM fan + adapter + 120MM side panel on case. But I'm worried the thickness of adapter + fan will hit video card
Answer:	That all depends on the width of your case.
Question:	inches in depth
Answer:	Yeah.
Question:	will this support the weight of a radiator w/fan? I have a Storm Scout 2, which only has 120mm brackets. i want to get the Kraken x40, which is 140mm
Answer:	I have this and would not use it like that, would trust the 140mm mounting but not the 120mm on the plastic alone. Instead get a single 120mm fan shroud at least 1" thick and use the 120mm fan. This will eliminate any flat spots (center and outer) in cooling on the radiator. There are plenty of high quality 120mm fans.
Question:	Will this work for a 140mm hole and a 120mm fan? I have a 120mm heat exchanger from Koolance and the new case I bought has 140mm fans. I would like to use the same heat exchanger as it would be more expensive than a new fan or an adapter. Thank you
Answer:	Harty: The 120mm to 140mm adapter will work on a 140mm hole. I used it to adapt a Corsair H55 inside my case. The 140mm side will have to fit against the surface of the 140mm hole and will protrude a little, so make sure you have the room.
Question:	Link given for programmable version of your pre-set thermal controller is broken. Where do I find this
Answer:	Here you go: https://www.amazon.com/Coolerguys-Programmable-Thermostat-Controller-Standard/dp/B08FBTC2BR/ref=sr_1_2?dchild=1&keywords=programmable+thermal+fan+controller&qid=1608049168&s=electronics&sr=1-2
Question:	Will this fan work with a PWM controller on a processor cooling system
Answer:	It should because I use it to keep a air cooled engine on a four wheeler cool. It does a great job of that because the engine gets so hot because I use it for spraying and I’m not moving very fast
Question:	I just need it off or on at high speed. Can I wire it that way ? I just need positive and negative wire
Answer:	Hi! Yes. There are three wires, but they're painted black. Let us know if you're hard wiring it in and we'll send you a wiring diagram (the third is a tachometer speed sensor wire which you won't need).
Question:	Will this work as outer fan on Coleman cooler
Answer:	This fan provides substantial air flow, as well as protection against dust and water exposure. Please feel free to contact us at (425) 821-6400 with any other questions about your set up, or for more customized recommendations.

Product features

SPECIFICATIONS

• RPM: 3000 +/- 10%
• Rated Current: 0.36 Amp
• Airflow: 105 CFM
• Noise: 42 dB
• Rated Voltage: 12V DC
• Bearing Type: Dual Ball Bearing

PADDED CORNERS

Rubber guards keep the fan stable, reduce vibration noise, and protect your devices or machine from scratches when it is mounted.

AVAILABLE SIZES

• 140x140x25mm
• 120x120x25mm
• 120x120x38mm
• 25x25x10mm

Fan Adapter 140mm to 120mm

Features:

• This is designed for all 140mm fan installing in most PC cases that come with 120mm fan screw holes only.
• This will eliminate the unnecessary drilling on the chassis for 140mm fan.
• The Fan Adapter funnel design will channel airflow through the 120mm ventilation hole on the chassiss.
• 4 screws included / Available in UV Blue and Black Color.

Models / Colors and Accessories:

• Fan Adapter 140mm to 120mm / Black and UV Blue
• Include 4 screws

Applications

• 1.Uniquely light design,New Dual ring light effect,provides amazing stunning white lighting effects on the gaming computer case in the darkness.
• 2.HIGH EFFICIENCY, MUTE-Combination of high efficiency heat dissipation and mute,9 pcs bionic shark fin fan vanes,There is cut back processing on both external and internal of the fan frame to make a large amount of air and improve the heat transfer.In addition, the fan vanes have been polished, not easy to stick ash.
• 3.Perfect Cooling Performance:Tuned for high-airflow, large volume cooling, silent operation as an excellent choice for case cooling.Wear resistant hydraulic bearing construction makes the fan run noiseless and the air volume larger with an astounding service life of more than 40,000 hours.
• 4.ASEISMATIC DESIGN-Silent noise reduction,That 8 damping silicone pads fixed on both sides of the fan frame is to reduce the noise of the polarization motor vibration.The most commonly 120mm size for computer case.Compatible 3-pin connector for mainboard and power supply that also works with 4-pin headers.
• 5.What You Get: EN12WT3 White LED Case Fan, our worry-free 12-month warranty and friendly customer service.

User questions & answers

Question:	does this lightup from both sides , intake and outake sides
Answer:	Yes it does my friend. As a verified buyer I can tell you they do.
Question:	Do you need both the 3pin and the molex plugged in for the led to turn on
Answer:	You an use either molex or the 3 pin you don't need both , molex is there to provide another means of connection but is also wired to and is the same way as the 3 pin, if using one or the other the light will change by a percentage of power the fan is getting i.e there on the same line hope all this helps
Question:	can you daisy chain the connections
Answer:	You have to have 12 volts across each fan so wire in parallel not series, as long as power supply can handle the load. No daisy chaining.
Question:	where are the volts and watts specs located
Answer:	I looked on the ones I got and 12 v .16amps. These fans are rated at less that 50cfm, so they don't move much air but are very low noise.
Question:	How many amps do these fans draw
Answer:	On the front of each fan, it shows DC12V 0.16A, so, I would assume it draws 0.16 amps.
Question:	Does it come with screws
Answer:	Yes, We didn't even take it out of the box. There's 4 screws for each fan. Total of 4 fans.

Product features

Good heat dissipation performance

9 fan blades effectively improve the diversion effect, prevent vibration and keep silent. Diversion design for efficient heat dissipation.

High Quality Bearing

Hydraulic bearing with longer service life to reduce noise and improve heat dissipation efficiency.

Double-sided damping rubber

Double-sided damping rubber reduces the noise generated by resonance and is stable and quiet.

SPESCIFICATION:

• Size :120*120*25mm
• Fan Speed:1150RP±10%
• Noise Level:18dBA
• Airflow:40.58CFM
• Bearing:Hydro Bearing
• Interface：3pin+molex 4pin

• Designed for projects that requires cooling or ventilation; or as a replacement fan for various products.
• Terminal connectors, includes optional wire-leads cord adapter. For same kit with plug cord and grilles, see model HS1238A-X.
• UL-certified fan with dual-ball bearings has a lifespan of 67,000 hours. Can be mounted in any direction.
• High Speed: This model is designed to maximize airflow and can be too loud for some applications.
• 120 x 120 x 38 mm ( 4.7 x 4.7 x 1.5 in. ) | 100 to 120V AC | Airflow: 110 CFM | Noise: 47 dBA | Speed: 2600 RPM

User questions & answers

Question:	Where can i get the mounting hardware that comes with the other ac infinity fans
Answer:	Hi there, Thank you for reaching out to us! The mounting hardware will only be included with a select number of the axial fans, all of which will have the hinges pictured in the product picture. Kind regards, Kenny Ngo AC Infinity
Question:	What size screws do you need for the holes
Answer:	Hello, You would need a screw that is designed for a screw hole size of Ø 0.17 in. (Ø 4.3 mm). Thank you for your question. Kind regards, Andrew Avila AC Infinity
Question:	Web page (2015-12-15) says:"Does not include fan guards or power cord", but several reviews say that it does... what's up
Answer:	Hi Rich, Thank you for your inquiry. Here is the link for the fan and kit: http://www.amazon.com/dp/B009OWRMZ6 Please let me know if there are any questions or concerns and I'll be happy to help. Thank you and have a great day!Kind regards,Bernard M.AC Infinity
Question:	how many CFM do these move
Answer:	Bullet point on the listing says 110CFM that is 110 cubic feet per minute or if you like 3.15 cubic meters per minute, maybe 49500 gallons per hour, how about 1760 fluid ounces per second or........

Product features

Heavy-Duty Fan

Each fan is constructed of die-cast aluminum and suitable for various environments. Thermoplastic impeller has high flammability resistance.

Dual-Ball Motor

Dual-ball bearings rated at 67,000 hours allows the fans to be mounted flat or upright. Impedance protected motors have a high resistance to heat.

Quality Approved

Disclaimer: This fan is UL recognized under certificate E503903 on Oct 18, 2018 by Underwriter Laboratories. Verifiable on UL Online Certifications.

High Compatibility

This fan is engineered with terminal connectors and includes an optional cord adapter that allows you to connect it to AC wire-leads.