12 best tile removal tool

• Trim Saving - The trim removal tool has a larger, flatter and wider contact area than clumsy traditional tools and features an integrated wedged center that provides increased removal efficiency and prevents damage to both the trim and wall
• Revolutionary Tool - Our Trim Puller is a very beefy tool. The Build-in spring design assists in separating trim from wall freely and quickly. The 15 degree wedged center for easy extraction of trim and baseboards
• Durable Pry Bars - Our trim puller are made from 65 Mn steel with black electrophoretic and polished finish which protect against corrosion and give our pry bar added durability and strength. So the Trim Puller is a very beefy tool, and it will hold up well to repeated whacking
• Multi-Function - Ideal for commercial work, repair and remodel projects where care and precision are needed including cabinets, countertops, flooring and many more. It can be used on a kitchen remodel, removing a couple of sections of baseboard, a countertop from some base cabinets, and pulling up a ceramic tile floor. The very edge can also used to pry up the staples
• Ergonomic Handle - All our trim puller is built with an ergonomic, comfortable and textured dipped handle. An impact absorbing FPR handle makes it comfortable to hold, though

User questions & answers

Question:	After 2-days of pulling trim, a weld spot came undone and this tool is now useless, what can be done or who can I return it to
Answer:	You probably could I’m not sure
Question:	Has anyone compared this to the Zenith brand trim puller
Answer:	You can definitely reheat the wax! It’s specially made for you to use over multiple sessions. Simply adjust your heating time accordingly to the amount of wax left in the pot so you don’t overheat the wax and burn yourself.
Question:	Can this be used to remove wooden cedar fence boards from an old fence
Answer:	Hello, I would suggest doing a search on YouTube. There are many great videos explaining the different types, etc. Hope this helps.
Question:	Can this be used for window trim
Answer:	Hello, we are Amazon FBA shipping, thank you!

Product features

Goldblatt Trim Puller Save Your Trim, Baseboards and Walls from Damage

Step 1

Use a utility knife or painters 5-in-1 tool to score the top of seam where the trim meets the wall. This will prevent tearing the paint from the wall.

Step 2

Position the Trim Puller's front face against the wall with the sharp edge on the seam where trim meets the wall. For best results start at the end of baseboard strip.

Step 3

Strike the top of the Trim Puller with a hammer or hard mallet, driving the Trim Puller between the trim and the wall. The wedge will begin to separate the trim from the wall automatically.

Step 4

Once the Trim Puller is wedged between the trim and wall, gently pry the trim away from the wall by twisting the handle creating a gap. Repeat steps 2-4 and the gap will increase with each pull until removed.

Product description

The Zenith Floor Lifter was designed to bring the same utility and performance of the Trim Puller combined with the common and practical hand work of a chisel. The integrated wedge of the Floor Lifter has a larger angle for more aggressive extractions on bigger jobs. The Floor Lifter is excellent for wood flooring, wooden or vinyl siding, oversized boards and planks. Wood, ceramic tile, just about any surface can be worked efficiently with the Floor Lifter. It has the same integrated center wedge as Trim Puller that increases removal efficiency and prevents damage to both trim and wall. Its longer design provides for a deeper plunge on wider baseboards and trim. Its Z shape design is also ideal for crown molding removal. Great at scraping textured ceilings with its ability to accept standard extension handles, it also can be used as a hook to rip off vinyl or aluminum siding or hanging ceiling planks. And a Zenith specially designed extension handle allowing for aggressive tapping to extend your reach, just screw it into the end of the handle. The new extension handle will allow you to remove flooring and other materials reducing time spent on your knees. The 48Rc heat treated steel and a comfort handle insure great performance and durability. The Floor Lifter has more uses than any other tool in the category. Pull, Pry, Lift and Scrape. More uses, less tools, saves you money.

• IDEAL FOR REMOVING HARWOOD AND TILE FLOORS: The Zenith Floor Lifter is designed specifically for safely removing hardwood floors, ceramic tile, trim, nail or glued countertops and it’s great to scrape off popcorn ceilings. IT’S THE ULTIMATE DEMOLITION AND REMODELING MULTI-TOOL!
• INTEGRATED CENTER WEDGE TACKLES LARGER REMOVAL PROJECTS WITHOUT DAMAGE: The Floor Lifter has a larger angle with the integrated wedged center that provides increased removal efficiency for more aggressive extractions on bigger jobs and its longer design provides for a deeper plunge on wider baseboards and trim; eliminating the need for a shim or small board spacer.
• PULL IT, PRY IT, LIFT IT, AND SCRAPE: The Floor Lifter has more demo and remodel uses; it does all the work of a wrecking bar, flat pry bar or claw eliminating the need for a shim or small board spacer, which means less tools, saves time and money. ADD THE EXENTION HANDLE (sold separately) which will allow you to remove flooring and other material reducing time spend on your knees and is great for scraping ceilings.
• COMFORT GRIP, SHOCK-ABSORBING EDPM HANDLE: This trim puller is capped off with an EDPM handle that feels comfortable in the hand while offering exceptional shock absorption.
• DURABLE STEEL CONSTRUCTION-BUILT TO LAST: The 48Rc heat treated steel construction provides lifetime durability with a ground bevel on the edge which allows tool to easily be driven between trim and wall and also allows tool to be used as a shim for leveling cabinet bases.

User questions & answers

Question:	can this be used with gypsum board
Answer:	You can apply an appropriate amount of aloe vera gel to the hair removal area when using IPL hair removal to help shrink pores and smooth the skin.
Question:	What is the functional difference between this and the Zenith Trim Puller
Answer:	The razor is for shaving the area before IPL. If you don't shave the IPL won't be able to get to the hair roots. Yes, its usable on the bikini area.
Question:	I need to remove about 4' x 4' engineer wood flooring glued to concrete slab. Would this tool be helpful? Was going to buy some standard chisels
Answer:	You heat it for one min, without the lid and remove the plastic spatula as well, in most cases it will be ready ( even if you see the top still hard). Mostly depending on the microwave. After you heat it for 1 minute, make sure you stir it with the plastic spatula and mixed it all together, if is not ready to use, you can put it back in intervals of 20 sec.
Question:	Why is it cheaper for one that's $29 but when you buy two it's $115 it would be cheaper to buy one at a time
Answer:	No strips are not require, this is stripless was, you just apply it directly on your skin and wait for it to hardens and then pull back in a quick motion.

Product features

Floor Lifter by Zenith Industries

The Zenith Floor Lifter is true to its name. Wood flooring, ceramic tile, wooden or vinyl siding, oversized boards and planks, just about any surface can be worked efficiently with the Floor Lifter. The Floor Lifter has more uses than any other tool in the category.

The Floor Lifter was designed to bring the same utility and performance of the Trim Puller combined with the common and practical hand work of a chisel. Its longer design provides for a deeper plunge on wider baseboards and trim.

Lift

Strike top of Floor Lifter with hammer between sub-flooring and tile. The wedge will begin to separate the materials. Once the Floor Lifter is wedged pry the tile away from flooring.

Pull

Use a utility knife to score where trim meets the wall. Position Floor Lifter’s front face against the wall with the sharp edge on the seam. Start at the end of baseboard strip. Drive the Floor Lifter between the trim and the wall. As the wedge separates the trim gently pry the trim away from the wall. Repeat steps

moving the Floor Lifter along the wall in 12” increments.

Pry

Strike top of Floor Lifter with hammer between sub-flooring and wood planks. The wedge will begin to separate the materials. Once the Floor Lifter is wedged pry the plank away from flooring.

Scrape

Especially designed to accept standard thread extension poles for scraping. A specially designed striking extension handle to increase your reach for flooring and trim removal jobs will be available by Zenith Industries in the spring of 2020.

Product description

This 2200 Watt electric jack hammer delivers 1800 impacts per minute at 55 ft/lbs which can break up the hardest of surfaces. Since an air compressor is not required, this is one of the most portable jack hammers in the market. Adjustable 360° foregrip provides extra control and comfort during extended use. Our jack hammer is perfect for breaking up concrete, asphalt, mortar, hard clay, rocks, bricks and more! This jack hammer is perfect for home renovations or stone masonry project.

Features:

• It is perfect for demolition, trenching, chipping, breaking holes in concrete, block, brick, tile stucco, housing foundation removal, concrete slab, oil chimney and much more!
• Adjustable 360 degree foregrip provides extra control that makes it easy to conveniently adjust based on the positioning you need for the job at hand
• Available for Home and Commercial with the voltage of 110v/60 HZ, it's suitable for you to use it at home and business
• Excellent heavy-duty drilling power makes your work more efficient, use it at ease
• It accepts 1-1/8 in. hex shank bits
• Delivers 1800 BPM for fast demolition
• Including Electric Demolition Jack Hammer with 16" bull point chisel, 16" flat chisel, pair of protective gloves, protective goggles, hex wrenches and carrying case

Specifications:

• Color: Red
• Power Type: Electric
• Voltage: 110V/60Hz
• Motor Power: 2200 Watts
• Chuck Size: 1-1/8 In.
• Chuck Type: Hex
• No Load Speed: 1900RPM
• Speed: 1800 Impacts Per Minute

Package Contents:

• 2200 Watt Electric Demolition Jack Hammer
• 16" Bull Point Chisel
• 16" Flat Chisel
• Protective Gloves
• Protective Goggles
• Oil Bottle
• 3 x Hex Keys
• Wrench
• Carrying Case with Handle

• It is perfect for demolition, trenching, chipping, breaking holes in concrete, block, brick, tile stucco, housing foundation removal, concrete slab, oil chimney and much more!
• Adjustable 360 degree foregrip provides extra control that makes it easy to conveniently adjust based on the positioning you need for the job at hand
• Available for Home and Commercial with the voltage of 110v/60 HZ, it's suitable for you to use it at home and business
• It accepts 1-1/8 in. hex shank bits; Delivers 1800 BPM for fast demolition
• Including Electric Demolition Jack Hammer with 16" bull point chisel, 16" flat chisel, pair of protective gloves, protective goggles, hex wrenches

User questions & answers

Question:	Tool weight=35lb, compared to 70lb for a similar tool with less amperage. Does this result in more handle vibration and less impact force at chisel
Answer:	No you cannot see the whole coin at once which is explained in the listing itself. A magnifying glass would do that but this is for serious up close viewing/ out farthest you can see most of the head on coin or in god we trust etc /but if looking for defects and double strikes this works very well and am happy that I got it....
Question:	does it last ?? is the life of the tools good
Answer:	biggest pixel is 1080 FHD 50-1200 is the magnification
Question:	One reviewer stated this item was 5o lbs but the product description says 35 lbs, which is correct
Answer:	Is not any chemical with the microscope.
Question:	will this accept bosch 1 1/8" bits
Answer:	Yes

Product features

Heavy Duty Electric Demolition Jack hammer

• Durable material and forceful impact provides maximum removal for all day demolition

• Anti-vibration system actively improves users comfortness

• Innovative design offers better weight distribution in both vertical and horizontal applications

• Rotating chisel locks into different positions to optimize work angles

• Speed control allows for various jobs, protection, and maintains constant speeds

Dress Properly

Do not wear loose clothing or jewelry. Rubber gloves and non-skid footwear are recommended.

Plastic Handle

The Plastic handle is designed to prevent users from electricity shock.

Do Not Abuse Cord

Never carry tool by cord or yank it to disconnect from receptacle. Keep cord away from heat, oil and sharp edges.

Product description

The D25263K 1-1/8-inch D-Handle SDS Rotary Hammer with SHOCKS offers 3 Joules of impact energy for fast drilling and chipping speed. It has a 8.5 Amp high performance motor for all your needs, and also features SHOCKS active vibration control and regulation, resulting in reduced vibration felt in the handles - a Perform & Protect feature. This Rotary Hammer has a rotating brush ring which delivers full speed/torque in forward and reverse, along with an integral clutch that reduces sudden, high torque reactions if bit jams. Includes: Rotary Hammer, 360 Side Handle, Depth Rod, Kit Box.

• 3 Joules of impact energy
• 8.5 Amp high performance motor
• SHOCKS - Active Vibration Control, reduced vibration felt in the handles. A Perform & Protect feature
• Integral clutch reduces sudden, high torque reactions
• Rotating brush ring delivers full speed/torque in forward and reverse

User questions & answers

Question:	No torque rating? Does anyone know the torque rating or max hole saw size in wood and steel
Answer:	I don't know that I would use it for wood, though I guess you could. It can be set to drill, to jack hammer, or to drill and jackhammer combined. Also, don't know about torque, but I found it to be sufficient for all applications I've tried it in. It is surprisingly powerful and durable for a snall handheld unit.
Question:	Does this have a 3rd setting to drill w/o hammer option so can core drill
Answer:	It has 3 options: 1: drill without hammer, only spining, 2: drill with hammer, 3: hammer only for chisel. No spinning...
Question:	Does this unit have the option of variable positions for chisel bit
Answer:	Yes, it can lock in position either horizontally or vertically, as I have used it in both positions. It may lock in other angles, but I have not tried it in angles other than parallel or perpendicular to the handle. I also will mention that this unit has performed admirably and I have absolutely no regrets with my purchase. I was able to remove old tile (put down in the 1950's with thick-set. I found it works best at lower speeds and sharp angles of attack. Take your time and you won't work up any sweat, letting the tool do the work. Hope this helps.
Question:	How do you place the drill bit in the hammer drill, I have been working on this task for a few hours,it do not grip the bits at all
Answer:	This drill does require the special SDS carbide drill bits that have three slots in the shank. I pull the nose piece back and press a little on the bit and it will slip into the drill. I then rotate the bit to ensure that it is locked into place. The slots in the SDS drill bits allows then to transfer the drills hammer action to the drill point. With this drill only bits that are marked SDS Plus will work.

Product description

LUVRD Trim Puller - Time Saving, Easy Removal, Shock Absorption, Noise Reduction, Baseboards and Walls from Damage.



About our trim puller:

◆Durable:

Trim Puller is made of heat-treated steel that surfaces with black electrophoretic and polished, which anti-corrosion, provides firmness and durability.



◆For prying and pulling:

The tile removal tool has a notch for pulling nails to remove nails, screws, fixing devices, and pry open dry walls, self-adhesive floor tiles, ceramic tiles, trim bar, etc.



◆Will not damage the wall:

15-degree Integrated center wedge design, large and flat contact area of baseboard trim puller disperses the force without damaging the plasterboard, veneer, and walls.



◆Damping rubber handle:

The baseboard pry bar handle made from an EPDM absorbs vibrations from hammered metal. It is safe and comfortable to hold and reduces hand fatigue.



◆Widely applicable:

Easily remove baseboards, decorative strips, door frames, and decorative panels, baseboard tool remover is very suitable for maintenance and renovation projects that require careful budgeting, including cabinets, countertops, floors, etc.



◆Easy to use:

Pry the skirting board from the wall, the Trim Puller notch only needs to knock the tool down to help separate the skirting board from the wall instead of wedging the tool between the wall and the skirting board.



◆Noise reduction felt cloth cover:

Equipped with a black felt cloth cover to reduce the noise cased by the hammer when hitting the steel plate.



Specification:

1 x Trim Puller + 1 x Black Felt Cloth Cover

• Damage Reduction - The large contact area of the trim puller tool can disperse the force without damaging the wall, trim, and bottom plate. This set of baseboard pry bars and nail pullers are perfectly coordinated with the house renovation project
• Labor-saving operation - The trim puller tool has a non-slip EDPM rubber handle, which is comfortable to use and can be quickly disassembled under ergonomic synergy, saving time
• Noise Elimination - Equipped with a noise-reducing felt cloth cover to reduce the noise caused by the hammer when hitting the steel plate of the baseboard pry bar. Owing to the unique and friendly design, it could reduce working noise to 50 decibels, no horrible noise any more
• Hardened Steel Material - The baseboard removal tool is made of 48Rc hardened steel which is heated to temperature up to 900℃ for developing the optimum combination of hardness, strength and toughness. Hence, the trim bar is a very sturdy tool, and it will hold up well to repeated whacking
• Wide Application - 15-degree wedge-shaped centre, complete all the work of the crowbar, claw and trim bar. Luvrd trim puller tool is ideal for extracting baseboards, decorative strips, bottom plates, door frames and decorative panels

User questions & answers

Question:	I need a tool that can remove nails from panels or metal without causing too much damage. Does this trim puller work for me
Answer:	Yes, you can
Question:	Does the tile removal tool damage the plaster walls of my home
Answer:	It is recommended to use each part once a week.
Question:	Does this baseboard trim puller and hammers make a loud noise sound while using
Answer:	You should clean the skin before use any products you use I would wait and use them after the treatment like the next day if it irritates your skin. It usually leaves it rather sensitive and creams can add additional irritation .
Question:	Does this baseboard trim puller can be used with a gypsum board
Answer:	Yes, it's effective if you insist on using, bikini line is safe, but pubic hair removal is not recommended.

• SDS Plus Shank, compatible with electric or cordless SDS plus system impact drill and rotary hammers, like Dewalt, Bosch, Milwaukee, Makita, Hitachi
• Firecore bent tile chisel with ergonomically angled working end, designed for easy removal of tiles from floors and walls
• Special hardened alloy steel and special surface treatment for universal removal of material on a larger scale
• Slightly angled working end, Shank Type: SDS Plus, Length: 165 mm (6.5"), Width: 75 mm (3")
• Designed for removing tile, rust & weld spatter and concrete splatter

User questions & answers

Question:	Does this bit work with the bosch rh1255vc roto hammer
Answer:	It could be but a easier way would be to use a12 inch flatbar. This tool is designed to remove trim while also protecting drywall.
Question:	Will this work to remove 8” ceramic old tile on floor? sds max chisels seems wider
Answer:	Dear Customer, Thank you for your inquiry. Yes, this tool is ideal for interior window trim and any trim, molding or baseboard. Please feel free to contact us if you have any question.
Question:	I bought this but it's far too small for sds max rotary hammer, anyone know what the sizes are? thank you
Answer:	It is recommended not to use it on areas with tattoos.
Question:	Do all sds bits fit all sds drills and are sds- plus and sds- max mean different sizes
Answer:	Yes, it won't do any harm to your eyes.

Product features

Firecore SDS Plus Angled Bent Tile Chisel

Firecore FS18365 tile chisel constructed from special hardening of the high-quality tempered steel, with additional surface protection of the chisel effectively minimize wear and reduce notch sensitivity. This processing allows longer service life and a higher material removal rate. The extra wide 3 inch blade removes more thinset per pass. This scaling chisel is the perfect choice for clearing tile, thinset and other stubborn adhesives.

• SDS Plus Tile Chisel is not intended for concrete, but works great for remove the concrete splatter
• Please double-check the specs and the size to see if the hammers connection or the slot can comfortably fit

Compatible with All Standard Powerful Percussion Hammers and Drill Hammers

Firecore SDS Plus Shank works with all common SDS plus drills and impact hammers of Bosch, Hilti, AEG, Atlas Copco, DeWalt, DUSS, ELU, Hitachi, ITW split, Kango, Kress, Makita, Metabo, Milwaukee and other brands.

• SDS Plus shank, compatible with all standard SDS Plus rotary hammers
• SDS Plus looks similar to SDS-MAX but is much smaller
• SDS Plus shanks are usually made from 1/2" diameter steel and the shank end is only .394" in diameter

Optimized Geometry & Curved Shape

This bent tile chisel is designed to sit flat on the surface of the area that is being scraped or cleaned to work at a convenient angle to the floor. The angled head makes it easier to loosen tiles from wall and floor surfaces, designed for easy handling.

• Single Bevel for Maximum Material Removal
• High wear resistance to extented service life
• Tempered for long life and extended durability

• ALL-in-ONE: This multifunctional 6-piece chisel set includes a tile chisel, grooving chisel, scrapping chisel, flat chisel, point chisel, and scaling chisel so that you're ready to work on any material from ceramic tile to concrete, brick and masonry to real and artificial stone, even granite
• SDS PLUS SHANKS: These drill bits slot perfectly into your SDS Plus hammer drill regardless of manufacturer, whether Bosch, DeWalt, Makita, Milwaukee, Hilti, or other
• NON-SLIP: Our handles are crafted for tight non-slip use, with powerful torsion resistence to give you a longed service life even under punishing use
• HEAVY-DUTY: This SDS Plus drill bit set is made from high-quality chromium steel that has been drop forged and then heat tempered to give you strength and long-term corrosion resistance
• SATISFACTION GUARANTEED: Order with peace of mind, thanks to CO-Z's strong warranty and friendly 24/7 customer service

User questions & answers

Question:	What is the diameter of the shank
Answer:	One unit to do all three if you. are sharp enough to understand it ,otherwise save your money ,like I didn’t !!,
Question:	Will these work in a dch133b rotary hammer drill
Answer:	I tried to use it for Schmetz microtex 8/60 needle and after half an hour or more I have to changed the needle to 10/70 (I was using gutterman 100% polyester) and it was ok
Question:	Will these work for a Milwaukee better hammer drill
Answer:	Using this threader certainly doesn't require clearly seeing thing as fine as thread and the thin aluminum wire of the traditional threader. But I have two concerns: (1) I believe this threader is intended for threading sewing machine needles so it wouldn't be of much use for ordinary sewing needles; and (2) if one's eyesight is bad enough, one might have to depend a great deal on the sense of touch to position the thread correctly and the position the threader properly against the sewing machine needle, and that could be tricky for an older person whose manual dexterity and tactile senses are diminished. Something that has a more automated operation would probably be better, e.g., the Infila Auto Needle Threader sold on Amazon: http://www.amazon.com/MAGNIFYING-AIDS-Infila-Needle-Threader/dp/B001D1KLHC/ref=sr_1_20?ie=UTF8&qid=1407271931&sr=8-20&keywords=needle+threader
Question:	Where are these made
Answer:	This device does TWO things; a) holds sewing needle so it's easier to change the needle, and b) helps thread the needle after it's in the machine. Therefore, it is a "needle inserted & threader."

Product description

Industrial-ground carbon steel blades and big, beefy scrapers can take on practically any scraping job. Tools are designed to deliver maximum leverage on wall and floor surfaces. Multipurpose scrapers tackle anything from wax buildup to dried adhesives.

From the Manufacturer

Introducing Warner Tool Products a family owned company – 85th Anniversary in 2012, (Est. 1927). Research Driven Innovation: Pioneered the Soft Grip Putty Knife Handle in 1992, (ProGrip),Originated the color coding of Putty Knife handles to identify the flexibility of the blade. (Patented), Developed Dura Cap TM – more comfortable light weight hammer head, Developed Dura Cap TM – more comfortable light weight hammer head. Warner greatly improves the Paint Tool Shopper Experience: Job Specific labels that aide the consumer with knife selection. The product sells itself! Warner means Quality and Value: For 90 years, Professionals and Consumers have trusted the Warner name for quality products that perform. Warner is an industry Leader in Product Design & Innovation: ProGrip Putty Knives with color coding flexibility, Carbide Paint Scrapers, Soft Grip Taping Knives, Drywall Stilts & Benches. Our Competition Follow Us! As we continue our quest for innovation, Warner will provide the Amazon consumers with products that are at the envy of the market!

• Delivers maximum leverage on wall and floor surfaces
• Tackle any project, from wax buildup to dried adhesives
• Take on practically any scraping job
• Use Warner replacement blade 595, 599

User questions & answers

Question:	Would this remove paint from a deck outside
Answer:	Absolutely yes, the unique design and strength of the tool is great for prying loose anything. I watched the demonstration on YouTube and knew I needed it for flooring and walls.
Question:	Is it strong to scrape paint off on back of radiator by the window
Answer:	That would be seller setting that price, and not like can't up quantity on single tool.
Question:	What are the exact dimensions of this blade
Answer:	How about Amazon...they are great to work with
Question:	Will this scrape off glued down rubber-backed carpet? Carpet peeled off leaving glued rubber
Answer:	They both function the same and they are both imports. Neither one is better than the other.

Product description

• This is a Very Heavy Duty type floor scraper, CONTRACTOR GRADE. 
• The Bolt-On 2.5mm Thick Blade Gives Long Life
• 6 Inches Wide
• The Blade edge is chamfered and SHARPENED. 
• SDS Max 

• SDS Max
• Floor Scraper
• SDS Max Floor Scraper

User questions & answers

Question:	Will it work with a dewalt 1-1/8 hammer drill
Answer:	Hello Customer, thank you for asking. Our trim puller tool comes with a black felt cloth cover which could effectively reduce the noise to 50 decibels while a hammer hitting on our trim puller. The black felt cloth is an innovative items for the trim puller.
Question:	Is there a chance this product can be defective? I have a 20lb makita jackhammer and it doesnt lock, it slides right out
Answer:	Hello, Thank you for asking. The trim puller can be used on gypsum board because our pry bar is made of heat-treated durable steel, which very hard. The trim puller tool is perfect for removing baseboards, trim, tile, wood floors, nail pulling, crate opening, and more. We sincerely hope this information is helpful. If you have any further queries, please contact us via [email protected] Thank you!
Question:	I'm looking for a scraper floor for a 32 MM hammer drill can someone could tell me wich size I should order because I order one and it's too big
Answer:	Yes, it can be used on gypsum board. It will work well because has a large contact area and wedge, that will help extracting a board. This tool has a sharp blade and is very rigid, what will help inserting it, and removing board easier.
Question:	What's the width of the blade
Answer:	This has an additional pry bar on the handle, the center wedge part is closed instead of open, and it's a few inches longer and also about an inch wider. The trim puller was designed to be used with side to side torque ("pulling the puller"), whereas you would be mostly whacking this with a hammer on the back.

• ✔️【POWERFUL MOTOR】 12.5Amp industry motor with 5.2 feet /lbs（7 joules)impact energy is designed to complete heavy duty concrete and metal working projects with ease and precision. Heat dissipation design and anti-dust bottom structure can extend the hammer’s use life.
• ✔️【HUMANIZATION DESIGN】 Safety clutch protection designed to guarantee your wrist When the hammer is subjected to high torque force. 360° adjustable handle and upgraded double layer anti-vibration system are helpful for better and stable holding.
• ✔️【THREE FUNCTIONS】 Three different functions of drill,hammer and hammer drill function adapt to variety of work scenarios which are easy to switch. The double function switch design can extend 100% service life compared with single function switch design.
• ✔️【DRILLING CAPACITY】 The max drilling diameter for concrete is 1-1/4 inch and for metal is 1/2 inch. ENRH3203 rotary hammer drill can reach 880 r/min no-load speed and 4350bpm max impact frequency.The sds Plus chuck allows for easy and secure bit changes to keep your project going.
• ✔️【WHAT YOU WILL GET】 ENRH3203 rotary hammer*1;drill bits*3(5/16*6-Inch ,3/8 X6-inch,12/2 X 6-inch);5/9*10-inch point chisel*1,5/9*10-inch flat chisel*1;Auxiliary handle*1；Replaceable carbon brush 1 set;；329Grease*1；Dust proof cap*1；24 Months Defect Free Warrenty and Customer Support.

User questions & answers

Question:	is enrh3203 better than enrh
Answer:	It expands to 3" (or approximately 3.3" inside a 0.35" thickness). So if your phone is 3" or less in width, it will hold it. The bracket swivels, so the phone can be orientated in any desired position.
Question:	How wide is the chisel bit that comes with this drill
Answer:	I wouldn't even call it an installation....it just has two prongs that hold onto a vent louvre. If you want to remove it, just pull and it slips right off, but stays put when in use.
Question:	Can this drill be used with a smaller 3/16 sds plus bit
Answer:	Yes it fits iphone 4 and all manufacturers that my family uses.
Question:	what type oil should I use
Answer:	We are using it with a 7plus and it works great. Our case is not bulky.

Product features

ENRH3203 Rotary Hammer:

ENRH3203 heavy-duty hammer is your wise choice. It can reach 880 r/min no-load speed and 4350bpm max impact frequency applies to various working like dismounting walls, breaking floors, decorating houses, etc. With a good heat dissipation system, ENRH3203’s motor will not be at high temperature even after a long time working.

The safety clutch system protects users’ safety when the machine is overloading. Double layers anti-vibration control effectively reduce the vibration force during operation and avoid injury. Three different functions of drill, hammer and hammer drill function adapt to a variety of work scenarios that are easy to switch.

Heavy Duty Motor:

200℃ resistant copper wire motor allows long working hours without burning the machine. 1500W motor with a safety clutch is designed to complete heavy-duty work easily and safely.

Dustproof System:

Complete motor protection structure designed to prevent dust coming into the motor during working. It allows our users to work in a dusty working situation.

360 Degree Adjustable Handle:

Auxiliary handle designed to reduce the fatigue of our users during longtime working. Provides accurate and convenient strike in some relatively narrow places.

SDS-PLUS Keyless Chuck:

Patented SDS-Plus keyless chuck is designed to improve your work efficiency. You never need any tool to change bits in-between jobs. Accurate control provides the maximum impact energy transfer.

Upgraded Vibration Control:

Upgraded Double Layer Vibration Damping Technology(VDT) effectively reduced injury during working. And soft-grip handle designed for less fatigue and more precise control.

Heat Exhaust:

The efficient cooling system provides a continuous supply of fresh outside air for protecting the motor from burning due to excessive temperature. Extended service life.

Product description

✅ Grout Removal Tool, Scraper, Scrub Brush, Tile Joint Cleaning Brush, Remove Grout or Cleaning for Tile Joints and Seams✅



Remove

- Grout

- Thinset

- Mortar

- Caulking

- Dirt

- Surface residue

For tile Joints and Seams



With around 13 inches length to clean hard to reach spots and with ergonomic soft comfort grip handle to minimize fatigue under large jobs

• ✅ VERSATILITY: Remove unwanted grout, thinset, mortar, caulking or dirt from tile joints and seams, fits any width of tile seams or deeper tile joint
• ✅ TOP HARD TIPS: Made from super hard metal Tungsten Steel, it is harder than tile and any other metal include carbide and stainless steel, durable
• ✅ HIGH EFFICIENCY: Provides eight sharp scraping edges, based on this feature, for anyone with weak hands, it is easy to remove grout or scrape away grout, thinset, mortar, caulking, dirt, and surface residue
• ✅ GO DEEPER: Provide fine tip, moderate tip and big tip, fit any width of tile seams or deeper tile joint, good for cleaning crack tiles and getting into corners and up against walls
• ✅ USER FRIENDLY: With around 13 inches length to clean hard to reach spots and with ergonomic soft comfort grip handle to minimize fatigue under large jobs

User questions & answers

Question:	Replacement blades for reetree tool
Answer:	This is a sds plus chisel bit, probably need a sds plus rotary hammer if you want use it
Question:	hi need to get replacements blades where can i get them
Answer:	SDS-Plus looks similar to SDS-MAX but is much smaller. SDS-MAX shank bits will not fit any SDS Plus rotary hammer
Question:	does the grout removal tool comes with extra heads? Where one can get replacement heads when it’s worn
Answer:	Hello. Thank you for asking. The trim puller tool also functions as a nail puller. The thin blade surface can jam the nails well, and it can pull the nails out without excessive damage.
Question:	is there a warranty on this tool? mine broke about an hour into use
Answer:	Hello. This trim puller tool is exactly what is designed to remove the baseboard from a plaster wall and does a great job on keeping the plaster wall in place. It does not damage the plaster wall if following the correct instructions.

Product description

Medium barrel length with built-in power regulator, professional touch trigger. Designed for exhaust work, cutting metals, chipping and scraping surfaces. Specs: Delivers 3,500 BPM., 11/16" bore diameter, 2-5/8" stroke length, 4 CFM, 1/4" air inlet, 3/8" minimum hose size. Includes chisel shank size .401.

The Ingersoll Rand 114GQC standard-duty air hammer is handy whether you're cutting panels, fixing exhaust systems, or making general repairs. Powered by compressed air, this tool delivers a 2-5/8-inch stroke and 3,500 blows per minute (BPM) and is equipped with a quick-change retainer that makes it easy to swap chisels. Its rugged design sports an alloyed steel barrel and a heat-treated piston. A three-piece chisel set is included.

Efficient Design with Quick-Change Retainer

Delivering a 2-5/8-inch stroke and 3,500 BPM, and designed for maximum efficiency, the Ingersoll Rand 114GQC standard-duty air hammer is great for cutting metals, chipping and scraping surfaces, and working on exhaust systems. A quick-disconnect retainer allows you to change chisels quickly and easily so you can finish jobs faster.

Lightweight Yet Sturdy Construction

Like all of Ingersoll Rand's Edge series impactools, the 114GQC standard-duty air hammer is exceptionally rugged, compact, and lightweight. It comes equipped with a medium-length, alloyed steel barrel for a longer life and is powered by a heat-treated piston. Other highlights include a built-in power regulator, a professional touch trigger, a 0.401-inch shank, and a diffused exhaust at the bottom of the handle.

Award-Winning Ergonomic Design

The Ingersoll Rand 114GQC standard-duty air hammer features an award-winning ergonomic design that delivers exceptional torque accuracy along with increased productivity and safety. The tool's contoured grip offers greater comfort while you're working.

This product measures 8.5 inches long and weighs 4.1 pounds. Included is a three-piece chisel set featuring a tapered punch, a panel cutter, and a flat chisel.

About Ingersoll Rand

Ingersoll Rand is a global, diversified firm providing products, services, and solutions to enhance the quality and comfort of air in homes and buildings, transport and protect food and perishables, secure homes and commercial properties, and increase industrial productivity and efficiency. Driven by a 100-year-old tradition of technological innovation, Ingersoll Rand enables its customers to create progress and a positive impact in their world.

What's in the Box

Ingersoll Rand 114GQC standard-duty air hammer and a chisel set containing a tapered punch, panel cutter, and flat chisel.

From the Manufacturer

The economic air hammer for fast cutting action, especially for medium exhaust system, panel cutting, and general repair work. Part of Ingersoll Rand's Edge Series line of air tools: legendary performance at an affordable price.

• Includes 3-piece chisel set
• Quick change chisel retainer
• Longer life alloyed steel barrel and heat-treated piston
• Diffused handle exhaust
• Ergonomic grip

User questions & answers

Question:	Can it be used on tie rods and ball joints
Answer:	Yes, has plenty of power to handle suspension parts.
Question:	Where is it made
Answer:	This Ingersoll Rand Air Hammer and Chisel Set is made in Taiwan.
Question:	How do I assemble it out of the box? This is my first air hammer and it doesn't tell me anything in the printed materials
Answer:	The "tip" if you will is basically a quick (dis)connect attachment for the tips that came with it. Put that on and use the allen screws built into it to tighten it really good. Then you just grab it and slide it down towards the hammer itself, which allows you to insert the tips, then let go and they should be locked in. They won't be locked in tight, because otherwise the hammer isn't able to do it's job and move them, but you should be unable to pull them back out without sliding down the collar again.
Question:	I've got a 2cfm @ 90 psi porter cable compressor. will that be sufficient to power this tool enough to loosen the fan clutch (3 seconds?)on my truck
Answer:	Nope it will not. The specs say "average consumption 4cfm." This means at zero load basically holding it in your hand and pulling the trigger it'll use 4cfm at 90psi. Under load like chiseling out a stuck wheel bearing I've measured mine using 15cfm at 90psi. My 80 gallon continuous duty Ingersoll Rand compressor runs it fine but it's 7.5hp at 240v and is rated for 20cfm at 175psi which I regulate down to 90. My Ingersoll Rand gas powered dual tank "contractor" compressor barely runs it at 11cfm at 90psi. The truck bed mounted gas compressor is the only other one that runs it very well. Manufacturers will never tell you what tools use under load and will deceive the uninformed with specs like "average cfm consumption". I'm not knocking Ingersoll though as they have top notch products it's an industry practice / standard.

Product features

Ingersoll Rand Edge Series 114GQC Quick Change Air Hammer

This standard-duty air hammer is handy whether you're cutting panels, fixing exhaust systems, or making general repairs. Powered by compressed air, this tool delivers a 2-5/8-inch stroke and 3,500 blows per minute (BPM) and is equipped with a quick-change retainer that makes it easy to swap chisels. Its rugged design sports an alloyed steel barrel and a heat-treated piston.

Product Advantages

- Includes 3 piece chisel set featuring a tapered punch, a panel cutter, and a flat chisel.

- Efficient design with quick-change chisel retainer that allows you to change chisels quickly and easily

- Longer life alloyed steel barrel and heat-treated piston

- Diffused handle exhaust

- Award-Winning ergonomic grip that offers greater comfort while your're working

Efficient Design with Quick-Change Retainer

Delivering a 2-5/8-inch stroke and 3,500 BPM, and designed for maximum efficiency, the Ingersoll Rand 114GQC standard-duty air hammer is great for cutting metals, chipping and scraping surfaces, and working on exhaust systems. A quick-disconnect retainer allows you to change chisels quickly and easily so you can finish jobs faster.

Award-Winning Ergonomic Design

The Ingersoll Rand 114GQC standard-duty air hammer features an award-winning ergonomic design that delivers exceptional torque accuracy along with increased productivity and safety. The tool's contoured grip offers greater comfort while you're working.

Lightweight Yet Sturdy Construction

Like all of Ingersoll Rand's Edge series impactools, the 114GQC standard-duty air hammer is exceptionally rugged, compact, and lightweight. It comes equipped with a medium-length, alloyed steel barrel for a longer life and is powered by a heat-treated piston. Other highlights include a built-in power regulator, a professional touch trigger, a 0.401-inch shank, and a diffused exhaust at the bottom of the handle.

About Ingersoll Rand

Ingersoll Rand has stood at the vanguard of industrial innovation for over 100 year. From air compressor systems to power tools and beyond, the company manufactures products that offer best-in-class quality, reliability, durability, and performance. Ingersoll Rand is also deeply committed to building a better future. At every level of business, the company promotes environmentally sound practices to achieve progress that is truly sustainable. With offices and plants across the globe, Ingersoll Rand strives to meet the world's growing need for clean and comfortable air, safe and fresh food, energy efficiency, and sustainability.