10 best case with cooling fans

• Higher air flow to enhance cooling performance
• Economic solution for perfect performance
• RoHS compliance for protecting the environment
• 3 IN 1 Value Pack
• Ultra silent operation at 19 dBA

User questions & answers

Question:	are these at the fasted speed connected to the molex
Answer:	The fan has an arrow on it show the direction of the air flow. They can be mounted to blow out of or into the case.
Question:	do these need to use the molex power connector
Answer:	My take on these fans is vendor quality, as for air flow, that depends in part on your case.
Question:	pin connection
Answer:	Not right off, it’s just the standard screw size
Question:	Do the fans come with screws? Cause I dont have any
Answer:	12v

Product features

Product description

• Product Size: 120 * 120 * 25mm
• Pitch: 10.5cm
• Rated voltage: 12V
• Current: 0.12A
• Input power: 1.44W
• Speed: 1200RPM (constant speed)
• Air volume: 38CFM
• Static pressure: 58Pa
• Noise: 19DB
• Weight: 130g

• High performance cooling fan, 120x120x25 mm, 12V, 4-pin PWM, max. 1700 RPM, max. 25.1 dB(A), >150,000 h MTTF
• Renowned NF-P12 high-end 120x25mm 12V fan, more than 100 awards and recommendations from international computer hardware websites and magazines, hundreds of thousands of satisfied users
• Pressure-optimised blade design with outstanding quietness of operation: high static pressure and strong CFM for air-based CPU coolers, water cooling radiators or low-noise chassis ventilation
• 1700rpm 4-pin PWM version with excellent balance of performance and quietness, supports automatic motherboard speed control (powerful airflow when required, virtually silent at idle)
• Streamlined redux edition: proven Noctua quality at an attractive price point, wide range of optional accessories (anti-vibration mounts, S-ATA adaptors, y-splitters, extension cables, etc.)

User questions & answers

Question:	Does this come with a molex connector
Answer:	No
Question:	Will the pwm control on this fan stop it completely even with power to +12v/gnd
Answer:	I bought this as an accessory to the ring and my daughter said the bigger guys worked well. Sorry that's not more help. I think their figures were the 3" or 4" ones.
Question:	Is this an airflow fan or a static pressure fan
Answer:	They do break apart but are easily able to be put back together
Question:	How many cfm, or cubic feet per minute
Answer:	They're 6 inches

Product features

Proven NF-P12 design

Tens of thousands of quiet cooling enthusiasts around the globe swear by Noctua's classic NF-P12. Thanks to its impressive quietness, excellent performance and impeccable quality, the NF-P12 has become an established reference for quiet 120mm fans.

Pressure-optimised Nine-Blade Design

Specifically developed for high-impedance applications such as CPU coolers, water-cooling radiators or cases with tight fan grills, the NF-P12's nine-blade impeller provides outstanding pressure and airflow performance.

SSO-Bearing

Combining the proven concept of hydrodynamic bearing with an additional magnet that supports the self-stabilisation of the rotor axis, Noctua's time-tested technology has become synonymous with supremely quiet operation and exceptional long-term stability.

Vortex-Control Notches

Noctua's signature Vortex-Control Notches split up trailing edge vortices and thus spread the fan's noise emission over a wider range of frequencies. This measure makes the fan sound more pleasant to the human ear.

Colour-customisable with NA-SAVP1 anti-vibration pads

The fan’s frame can be outfitted with Noctua’s chromax line NA-SAVP1 anti-vibration pads. Available in black, red, blue, white, green and yellow, these pads not only damp minute vibrations but also allow the fan to be colour-customised in order to coordinate it with popular build colour schemes!

Product description

Thermaltake CL-F015-PL20BL-A 200mm Pure Series Quiet High Airflow Case Fan The Thermaltake Pure 20 fan comes with reliable, stable performance and gorgeous vibrant style. Available in 200mm, the Pure 20 fan offers the perfect balance of silence, style and efficiency. P/N: CL-F015-PL20BL-A Fan Dimension: 200 x 200 x 30 mm Started Voltage: 9. 0 V Rated Voltage: 12 V Rated Current: 0. 2 A Power Input: 2. 4 W Fan Speed: 800 R. P. M Max. Air Pressure: 0. 996 mm-H2O Max. Air Flow : 129. 639 CFM Noise: 28. 2 dBA Bearing Type: Sleeve Life Expectancy: 30, 000 hrs, 25℃ Connector: 3 PIN Weight : 304. 4 g

• High Performance: 200x30mm thick for high air pressure and airflow
• Enhanced Airflow: Fan blade designed to focus airflow and reduce noise, creating a torrent of air without creating excess noise
• Offers the Perfect Balance of Silence, Style and Efficiency
• Long Life Sleeve Bearing: long life bearing offers better reliability and extends life span
• Easy to install : Shaved frame allow more installation, specially the chassis from Thermaltake
• LED version available: Pure 20 series are available in LED version, adding cooling aesthetics to your chassis

User questions & answers

Question:	Will these fans work with a 3 pin fan controller to decrease or increase the speed of the fan, i am looking to use nzxt sentry mesh fan control
Answer:	It has 3 pins on my TT case.. however this case is approx 2 years old, has 3 identical 20 cm dia. fans, and the top one started to rattle. It was either faulty, or it failed prematurely but it did not sustain 30,000 work hours. THe rattling is not very persistent, but it is apparent there is some lose play on the bearing/shaft. The other 2 are still quiet. So I ordered a new one from Amazon for 14.99.
Question:	Is this a brushless fan
Answer:	Yes, this fan is indeed brushless and has sleeve bearings. Life expectancy is 30,000 hours. Hope this helped. So far it has exceeded my expectations. Seems to be a great addition to my case.
Question:	what is the length from screw hole to screw hole
Answer:	The center of the screw holes are exactly 6 and 1/16 inches apart according to my micrometer. I know as I've laser cut an acrylic case cover to fit the fan precisely.
Question:	Does this fan have a 3 pin connector or 4 pin
Answer:	It had a 3 pin coming out of the fan and then a 3 pin to 4 pin adapter

Product features

Thermaltake 200mm Pure 20 Series Black 200x30mm Thick Quiet High Airflow Case Fan with Anti-Vibration Mounting System Cooling CL-F015-PL20BL-A

Description:

High performance enduring case fan

The Thermaltake Pure 20 fan comes with reliable, stable performance and gorgeous vibrant style. Available in 200mm, the Pure 20 fan offers the perfect balance of silence, style and efficiency.

High Performance:

200x30mm thick for high air pressure and airflow . Pure 20 fan is designed to great silently, so user can keep his mind focused on the task at hand without bothering.

Enhanced Airflow:

Fan blade designed to focus airflow and reduce noise, creating a torrent of air without creating excess noise.

Features:

Long life sleeve bearing: Long-life bearing offers better reliability and extends life span.

Easy to install: Shaved frame allow more installation, specially the chassis from Thermaltake.

LED version available: Pure 20 series are available in LED version, adding cooling aesthetics to your chassis.

• 1.120mm fan for Low-Noise operation without sacrificing performance.
• 2.C8123-5 PC RGB case fan is compatible with all types of chassis and easy to install.
• 3.Unlimited color transformation, One key to change RGB color.With 8 ultra-bright RGB LED lights, provides full lighting for your build, achieving magical lighting effects with multiple-choice controls and multiple different modes.
• 4.The most commonly size(120mm) for computer case & radiators.C8123 is a perfect match for a RGB lighting computer system, The fan is designed to decorate your RGB systems, you can enjoy the performance with a beautiful setting.

User questions & answers

Question:	Can you purchase a replacement Fan Controller
Answer:	The short answer is that this device is not intended for that purpose. It's intended to do two things in the VHF/UHF frequency range: 1) measure the transmit power of your radio into a dummy load and 2) measure the Standing Wave Ratio (SWR) of your antenna using your radio as a frequency source. The device itself does not generate a signal - it uses your radio transmitter as a signal source. If all you're looking to do is measure continuity of your cable you can use a simple ohmmeter to do that. If you're looking to measure the impedance of your cable with connectors, google something like "measuring cable impedance" and you'll find a host of devices and techniques to do that.
Question:	Can i change fan speed with software
Answer:	The 5 watt dummy load is provided for use with the most common 5 watt radios. Very few users have 100 watt radios, so they only provide for most common use. You will need to buy your own 100 watt load, if you need one.
Question:	Will they work with msi b450 tomahawk
Answer:	Yes, it does come with a 50-ohm, 5-watt Dummy Load. The baggie is marked "Dummy Loads" but I only see one.
Question:	Does this work with nzxt software for the h500i
Answer:	NO

Product features

CAUTION:

• 1.Please power off the PC before connecting the cable to computer power supply.
• 2.Please confirm the interface firstly before connection or consult with us to confirm the interface.Please confirm carefully.
• 3.The fan not allow to mixed use of different brands of controller ,which may cause short circuit.

Specification:

• 5 xRGB LED case fan
• 1 x RGB Controller
• 1x Remote control board
• 20 x Installing Screws

• Unique Removable Top Cover Design, you can get in touch with the GPIO or Camera Connector Very Simple
• With 40mm Quiet Cooling Fan, it can drop the temps for your Pi
• Include Raspberry Pi 4 Heatsink, Better Cooling Experience
• Awesome Looking, it can make your Pi looks Cooler than others
• NOTICE: Updated version can compatible with Pi 4 Model B

User questions & answers

Question:	Do the fans make a lot of noise
Answer:	No this is very quiet, mine does not make any noise at all
Question:	Will this fit the Asus tinker board
Answer:	sorry, it cant
Question:	Why not b
Answer:	Because of the position of the Chip, the B+ version will be listed soon
Question:	Will this case be released for the B
Answer:	It will be listed very soon.

Product description

Sirius loop's larger blades and thinner frame allows the fan to generate more air, Which is efficiently pushed by the sickle-shaped blades. The large surface area creates more airflow and pressure. The center of the fan is also built with ventilation holes to cool the bearings and extend the fan's lifespan. The circular addressable lighting effect is complemented with black fan blades to add that solid touch of RGB lighting in PC builds. The dual-looped design provides users the option to install on either side. Connect Sirius loop ASL120 directly to the motherboard's addressable header. By simply connecting Sirius loop ASL120 to the Motherboard, the fan speeds can be automatically controlled through the signal sent to the Motherboard and effectively remove the heat from the chassis. Four shockproof rubber stands are strategically placed on the corners of Sirius loop ASL120 to keep its overall look and help reduce vibrations while in operation.

• Larger blades and thinner frame allows the fan to generate more air, Which is efficiently pushed by the sickle-shaped blades. The large surface area creates more airflow and pressure. The center of the fan is also built with ventilation holes to cool the bearings and extend the fan's lifespan.
• The circular addressable lighting effect is complemented with black fan blades to add that Solid touch of RGB lighting in PC builds. The dual-looped design provides users the option to install on either side.
• Connect Sirius loop ASL120 directly to the motherboard's addressable header. If your motherboard has an RGB header use the addressable RGB Controller provided (included with 3-pack only).
• By simply connecting Sirius loop ASL120 to the Motherboard, the fan speeds can be automatically controlled through the signal sent to the Motherboard and effectively remove the heat from the chassis.
• Four shockproof rubber stands are strategically placed on the corners of Sirius loop ASL120 to keep its overall look and help reduce vibrations while in operation.
• * The triple Pack includes an addressable RGB modular controller that allows fans to function without an addressable RGB motherboard. The lighting effect will function Independently though.

User questions & answers

Question:	Can i combine two kits for 6 fans somehow? i only want one controllers to control all 6 in the same case. (thermaltake core x71 case
Answer:	Yes you can. In most cases the controllers can removed and the fans can be combined with a hub. Whatever controls the hub controls all the fans
Question:	Is this actually 3 140mm addressable rgb fans? the price seems way off
Answer:	Yes it is.
Question:	Is this compatible with thermaltake tt sync sata powered 9 port addressable led controller tt premium edition
Answer:	The Thermaltake pure argb fans work very well with the sata powered controller, but you need an rgb header on your motherboard. Make sure you have that before you buy.
Question:	How would i get these to work with a z97 deluxe, i do not want to change color options through the controller
Answer:	Plug in the fans separately into the headers on the motherboard usually labeled "Fan 1, Fan2, etc" and that will supply power to your fans. As far as controlling the colors and timings, that is done through a controller that uses an addressable header to control changing of the colors. These fans are addressable. "Control fan lighting with select 5V addressable RGB motherboards. Supported motherboard software includes as US aura Sync, Gigabyte RGB FUSION, MSI Mystic Light Sync, and ASROCK polychrome.. Air flow - 56.45 CFM. Noise level - 30.4 decibels Analog ARGB controller - low-profile controller included for users without RGB Cable motherboards. Choose from 8 Preset colors (red, yellow, green, teal, blue, White, Purple, and rainbow), 7 LED modes and off mode (wave, full light, RGB spectrum, off, flow, ripple, pulse, and blink), and 4 LED speeds."

Product features

16.8 Million Colors LED Design

Featuring 9 addressable LEDs,great light coverage,and uniform color and brightness,the built-in LED ring can paint your build with 16.8 million colors

Synchronize Your Gaming Station

Pure ARGB fans are available in 12cm, 14cm, and 20cm to fit almost any case, radiator, or AIO cooler

InWin Sirius Loop

Sirius loop's larger blades and thinner frame allows the fan to generate more air, Which is efficiently pushed by the sickle-shaped blades. The large surface area creates more airflow and pressure. The center of the fan is also built with ventilation holes to cool the bearings and extend the fan's lifespan. The circular addressable lighting effect is complemented with black fan blades to add that solid touch of RGB lighting in PC builds.

Intelligent PWM Cooling

By simply connecting Sirius Loop fans to the motherboard, the fan speeds can be automatically controlled through the signal sent to the motherboard and effectively remove the heat from the chassis.

Shockproof Rubber Stands

Four shockproof rubber stands are strategically placed on the corners of the Sirius Loop fans to keep the overall look and help reduce vibrations while in operation.

Easy Cable Connection

Connect Sirius Loop fans directly to the motherboards addressable header and control the lighting effect through the motherboard software. Compatible with:

• ASUS Aura Sync
• GIGABYTE RGB Fusion
• ASRock Polychrome Sync
• MSI Mystic Light Sync

InWin Sirius Loop 3-Pack

Sirius Loop 120mm x 3

Addressable RGB Fan Cable x 3

Addressable RGB Y-Cable x 3

Addressable RGB Modular Controller x 1

Fan Screws x 12

Pins x 3

• 【Intelligent Speed Control】5 pcs 120mm full function PWM fans. The intelligent temperature controls the speed at 1000~1800±10% RPM, so the fan speed can be controlled and keep the fans quiet. There’s switch fan speed control by motherboard’s PWM signal. These fans are 4pin 5v ARGB connector that connect with RGB control box one by one. Please connect the fan 4Pin PWM connector with 1-to-5 strip cable’s female port, do not connect it with motherboard.
• 【Dual Light Loop Design - Controlled by RGB Remote Controller】Addressable RGB LEDs can be controlled by RGB remote controller - 12 lighting modes, 8 different colors and multiple RGB light speeds, provide colorful streamer lighting effects. Double-sided ring ARGB glare effect design, creating a practical and beautiful cooling system. You also can turn on / off the fan light effect and switch fan hub’s RGB signal to motherboard 5V ARGB / 12V RGB port by remote.
• 【Shockproof Design】The fan frame is fixed on both sides with 8 pieces of shock absorbing rubber pads. The rubber soft material which is not easy to peel off has good shock absorbing effect, which can make the internal operation of the computer case stably and reduce the noise output between the fan and the computer case. The maximum noise of the fan is only 31.4dBA.
• 【Top Bearing Technology】Hydraulic bearing with longer service life to reduce noise and improve heat dissipation efficiency. Lifetime 30,000 Hrs. Wireless RGB controller, more advanced wireless control dimming technology than infrared, you can still switch the light mode without aligning the light source.
• 【Sync with Motherboard’s RGB/ARGB Port】12V RGB sync and 5V ARGB sync connector, 4 pin PWM power connector. Please connect the fan ARGB connector with control box one by one. To avoid making reverse connector, please follow the silk mark instruction strictly when you insert the connector to the control box. Suitable for liquid cooler and support 120/240/360mm radiators. (CPU Cooler/Computer Case/GPU etc)

Product features

SilentPro 9 Fan Blades

9 fan blades and the surface airflow guide groove is used to process a large amount of air and concentrate the wind on the leading edge of the blade for higher wind pressure and quieter.

Hydraulic Bearing Technology

Hydraulic bearing with longer service life to reduce noise/oil overflow and improve heat dissipation efficiency. Life expectancy can exceed 30,000 hours.

Double-sided Silicone

The fan frame is fixed on both sides with 8 pieces of shock absorbing rubber pads which can make the internal operation of the computer case stably and reduce the noise output.

PCCOOLER: One of Top Leader in Case Fans

Please kindly read the quick install guide at first before installing the fans.

Support 120/240/360mm radiators, motherboard ARGB (+5V/3Pin) and RGB (+12V/4Pin)

Motherboard software synchronization mode to build your own lighting control system. The fan cable is 60cm, compatible with most computer case. The best choice for computer gamers.

These PWM pc cooling fans sync with ASUS, MSI standard motherboard and Gigabyte motherboard (there’s extra 5V-VDG adaptor cable).

Package Contents:

5 x Corona 120mm PWM Fan

20 x Fan Screws

1 x SATA Power Input Connector + Fan PWM Cable

1 x 12V-RGB Sync Cable (ASUS/MSI)

1 x 5V-ARGB Sync Cable

1 x Gigabyte 5V-VDG Adaptor Cable

1 x 1-To-5 Fan Strip Cable

1 x Quick Install Guide

Product description

Material: PVC



Use for: Keeps your Xbox Series X console clean, reduce fan dust



Package includes: 2 x Dust Filters for Xbox Series X



Note: Only for Xbox Series X console

• Exclusive Design: This dust filter is specially designed for Xbox Series X Console and keeps a good appearance of your console.
• Dust Prevention: The dust cover not only keeps your Xbox Series X console clean but also makes it in a good condition after you use it for a long time.
• Easy to Install: Just use adhesive double-sided tape to fix it, no need screws, easy and convenient installation.
• Durable and Convenient: Dust filter for Xbox Series X is made of high quality PVC, it can effectively reject the entry of dust and prolong the life of your fan, easy cleaning and replacement.
• Package includes: 2 x Dust Cover for Xbox Series X.

• Premium quiet fan, 200x200x30 mm, 12V, 4-pin PWM, max. 800 RPM, max. 18.1 dB(A), >150,000 h MTTF
• ATTENTION: 200mm diameter (7.8 inches) and a thickness of 30mm (1.18 inches). Please make sure you have sufficient space in your case.
• Award-winning A-series design with Flow Acceleration Channels and Advanced Acoustic Optimisation frame for superior quiet cooling performance
• Large 200mm diameter for high airflow performance at extremely low noise levels, three sets of mounting holes (154x154, 170x170 & 110x180mm)
• Includes anti-vibration mounts, fan screws, Low-Noise Adaptor, extension cable and y-cable for running two PWM fans on the same header

User questions & answers

Question:	How loud is this Fan, decibels
Answer:	Hi, currently the app and the smart lock has one to one relationship so transferring the ownership is not possible.
Question:	Do you think this creates enough airflow to mount under a desk to blow computer exhaust? It needs to blow the hot air about 4 feet
Answer:	The app shows the last known location of the smart lock on the map, regardless of whether the app and the smart locker are connected or not
Question:	I connected the nf-a20 pwm to a nf-fc1 controller on a 12v battery (yellow 12v +, black 12v ground). why no effect on the fan speed
Answer:	Maybe 4-6” - Nothing linger then a normal padlock
Question:	Is it compatible with the phanteks enthoo evolv itx case
Answer:	No - it is using Bluetooth

Product features

Award-winning Noctua quality in 20cm size

While more and more PC cases support 20cm intake, side-panel or exhaust fans, many of the bundled stock units and available aftermarket options are of questionable quality. By contrast, the NF-A20 is a true premium grade solution worthy of Noctua’s award-winning A-series.

Caution: As there is no fixed industry standard for the shape, thickness or hole spacing of 200mm, 220mm, 230mm or 250mm fans, compatibility can vary from case to case. Please check compatibily before purchase. A case compatibility list can be found on the Noctua website.

Flow Acceleration Channels

The NF-A20 impeller features suction side Flow Acceleration Channels. By speeding up the airflow at the crucial outer blade regions, this measure reduces suction side flow separation and thus leads to better efficiency and lower vortex noise.

SSO2 bearing

The NF-A20 features the further optimised second generation of Noctua's renowned, time-tested SSO bearing. With SSO2, the rear magnet is placed closer to the axis to provide even better stabilisation, precision and durability.

154mm, 110x180mm and 170mm hole spacing

In order to ensure broad compatibility with today’s PC cases, the NF-A20 features three sets of mounting holes: While the 154x154mm and 110x180mm spacing allow it to replace most 200mm fans, the 170x170mm spacing is used by many 230 and 250mm fans, which can thus also be replaced by the NF-A20.

Scope of delivery

• Low-Noise Adaptor (L.N.A.)
• 4-pin y-cable
• 30cm extension cable
• NA-AV3 anti-vibration mounts
• NA-AV4 anti-vibration mounts
• Fan screws

• The standard 120mm computer case fan, compatible with the different types of chassis. High-performance fan for the CPU heatsink and water cooling system.
• The design is user friendly interface: a 3pin 4pin two interface design, compatible with any motherboard, power supply plug or other devices.
• Super Silent PC Heat Sink: all copper motor and rugged. hydraulic press bearings with self-lubricating antifriction material, reduce operating noise, improve efficiency, and run the noise less than 25 decibels.
• High-speed and high-brightness LED design, easy to install and improve airflow to maximize airflow for High capacity cooling, let your PC more durable.
• The quality assurance: If you have any questions, please contact us. The quality of our products, and will do our utmost to quickly and efficiently resolve your issue.

User questions & answers

Question:	Does the wire harness include standard wall outlet cord
Answer:	Hello, there are only two interfaces: computer power interface and motherboard fan interface. Does not include USB interface and wall outlet interface.
Question:	Can you change the colors from the motherboard when plugged in
Answer:	Hello, this fan is fixed color, can't change color.
Question:	I plugged the fans into a working fan header and the lights turn on without the fans spinning. How do I fix this issue
Answer:	hello,The working voltage of the fan is 12v, please help connect the 3pin port of the fan to the sys_fan port of the motherboard (note: only use the 3pin port during the test, do not use the 4pin port). If the problem is still not resolved, please let us know and we will solve the problem for you in other ways. Thank you
Question:	The screws seem too thick for the fan. The holes are not or threaded. When securing most of the screws cracked the holes
Answer:	Hello, we provide self-tapping screws, which will have threads after being screwed in. These screws will not cause the screw holes to break, Please rest assured. If there are any problems during installation, please let us know.

Product features

Specifications:

Fan Size : 120mm*120mm*25mm / 4.7in*4.7in*1in

Speed : 1200RPM±10%

Input Voltage : DC12V

Current (Ampere): 0.25A

Input (Watt): 3.0W +/- 10%

Bearing Type : Hydraulic Bearing

Noise : <30dB

Connector : big 4 Pin & 3 Pin

Cable length: 30cm / 11.8in

Superior RGB LED illumination effect

The Conisy AL-120 LED case fan boasts 32 independent RGB LEDs light to create vibrant lighting and visual effects.Elegant and soften blue lighted effects perfect match your PC's theme.

Hydraulic Bearing Design

The hydraulic bearing self-lubricates with a high quality, friction-reducing substance which lowers operating noise and improves efficiency. The seal cap prevents leakage of the lubricant, and improves the lifespan of the unit, service life of more than 30,000 hours.

Created for Quiet

Unique 9 blades design is engineered to generate higher airflow without compromising on ultra-silent operation.Ultra-thin fan blades ensure less vibration, noise and turbulence.

Silent operation as an excellent choice for case cooling.

Two way installation:

Blow warm air out of the case. Draw cool air into your case.

They are ideal for mounting at the rear or top of your PC case as exhaust fans for your PC's motherboard and CPU, graphics accelerators, and other components that fill the case with heat.

and They are ideal for mounting at the front or bottom of your PC case as intakes fans.

Compatible:

3-pin power connector for powered by motherboard

IDE 4-pin power connector for powered by PSU power supply

IMPORTANT NOTE: Use ONLY One Type of Power Connection at a time. You may short circuit your motherboard if you connect both connectors at a time.

Support multiple fans through IDE 4-pin Concatenation.