14 best cooler master 12v fans

Product description

Case cooling is becoming more essential these days. The better airflow inside your system, the cooler and more stable system you will get.

• Strong air flow to enhance cooling performance
• Silent operation for case cooling
• RoHS compliance for protecting the environment
• Voltag : 12 VDC ; Current (Ampere) : 0.09A (Max 0.11A)
• Fan Life Expectancy : 50,000 hours ; Input (Watt) : 1.2W
• Speed (R.P.M.) : 2000 R.P.M. ± 10%

User questions & answers

Question:	Can this fan be mounted horizontally? (i.e. blowing upward) Non PC use
Answer:	Hello,Right, as others have already answered you can mount this fan vertically or horizontally.Regards,PartsCollection
Question:	does it come with wires
Answer:	yes it does come with wires and an adapter if you have a 4 wire plug. the fan is already making noise though after a few months of use.
Question:	whats the L,W,H? thanks
Answer:	Hello,This is a 80x80x25mm fan or 3.15 inch x 3.15 inch x 0.98 inch.Regards,PartsCollection
Question:	How far apart are the diagonally opposite screw mounts? thanks
Answer:	this is a 80mm by 80mm fan, so the diagonal should be 113.13708mm approximately

Product description

Cooler Master 50mm x 50mm x 20mm Fan 3-Pin 12V 6000RPM High Speed

• 50x50x20mn 3-wire 3-Pin Fan
• 12VDC, 6000 RPM,
• 3-WIRE 3-PIN Tech Output Sensor
• Moves a lot of air, 18 CFM air flow.
• 3-Wire with Computer Connector (- / + / RPM)

User questions & answers

Question:	How is the separation of the bolt holes
Answer:	Hello,Its a standard 50mm size but do you need to know exact size of the distance of the mounting holes? Diagonally or just side to side?Regards,PartsCollection
Question:	Whats the CFM and db rating
Answer:	Yes, I fully understand that. What is the db and CFM rating? How loud is it in db, and how much air does it move in CFM's?

Product description

The 1-to-3 RGB Splitter cable allows users to extend multiple RGB LED fans and LED strips to build up aesthetically beautiful lighting systems. It is both capable of connecting with standard 4-pin RGB header and 5-pin RGBW header without an adapter.

• 1-To-3 RGB Splitter cable
• Extend multiple RGB LED fans and LED strips
• Flexible 58 cm or 22. 83 inches in length for cable routing
• 5-Pin and 4-pin RGB header compatibility
• Both 4-pin RGB header and 5-pin RGBW header without requiring any adapter

User questions & answers

Question:	I have a MasterLiquid ML240R RGB. Could I plug the water cooler and the 2 fans from the radiator into this, then just simply plug into RGB Header
Answer:	Hello Mike, The 240R is an addressable RGB unit. You can use this splitter and plug in the fans and pump into it, then plug it into an ARGB header. It won't work with a standard 12vdc 4 pin RGB header; ARGB and RGB are not the same technology. CM-PNguyen
Question:	How do i know when i need a rgb splitter? my mobo is gigabyte z390 ud and i want two rgb led strips
Answer:	If you are not going to be using a controller hub, and the total number of LEDs is under 300 per RGB port on your motherboard then you can use it like a extension cord of sorts. If you have more than one RGB port you can have the 2 strips on one port, and your fans (or heatsink RGBs) on the other port(s) with RGB Fusion you can select different colors to the different ports.
Question:	Can this splitter be used to power my cpu coolers rgb and splitting into my usb fan hub as well
Answer:	Yes it will work for that
Question:	Do i need an rgb controller or can i just plug one of these into an rgb header on my mobo
Answer:	Your preference I think, but depending on what rgb device you are using you may get more customizability with a controller (which, I think most of those use a usb header on the motherboard?) If you use the rgb header on the mobo you can control the rgb devices through the mobo software, instead of using a separate controller. But Corsair devices probably work best with a corsair controller, that brand has its own software too.

Product features

Cooler Master 1-to-3 RGB Splitter Cable for LED Strips

Long and flexible 58 cm in length and flexible material make it easy for cable routing. Keep it effortless and hassle free.

Daisy-chaining capability 1-to-3 ways splitting for your freedom to connect multiple RGB fans or LED strips. By daisy-chaining them the possibility increases even more.

Reliability Beyond the look , we provide quality. With highquality material, keep your build flawless and reliable

5-pin and 4-pin RGB header compatibility Special design connectors make it compatible with both 4-pin RGB header and 5-pin RGBW header without requiring any adapter.

Product description

The 80mm slim fan is designed for special application spot cooling in Cooler Master chassis. These slim fans are low profile and designed to fit better in CM 690, CM 590 and CM 690 II Advanced and Basic models.

• Efficient 11-blade fan design for increased cooling at lower speeds
• 24.2 CFM Higher airflow to enhance cooling performance. Fan Life Expectancy 35,000 Hours
• Silent operation at 20 dB-A for excellent case cooling
• RoHS compliance for protecting the environment
• Recommended for CM 690 / 590 / 690 II. 3 pin Connector. 2000 R.P.M. ± 10% Speed (R.P.M.)
• Efficient 11-blade fan design for increased cooling at lower speeds
• 24.2 CFM Higher airflow to enhance cooling performance

User questions & answers

Question:	Is the 92mm size a measure of the physical plastic, so that it's 90mm from screw to screw
Answer:	No. Fan blades are plastic
Question:	I would like to use this fan to help cool a rv fridge. which two wires should I use to connect it
Answer:	no mounting hardware
Question:	what is the cfm
Answer:	Probably not forcefully enough Nicely adjustable though
Question:	what adapter do i need to connect these to my power supply? and can i connect all on the single cable
Answer:	There is only one piece of assembly required (aside from plugging in plugs) and that involves screwing in four phillips screws to attach the wire protective cover over the front of the fan.

Product features

Cooler Master Sleeve Bearing 80mm Silent Fan

Features:

• Recommended for CM 690
• 24.2 CFM Higher airflow to enhance cooling performance
• Silent operation at 20 dB-A for excellent case cooling
• Fan Dimensions (L x W x H) 80 x 80 x 15 mm / 3.2 x 3.2 x 0.6 inch
• Fan Rated Voltage 12V DC
• Fan Rated Current 0.12 A
• Fan Power Consumption 1.44 W

Product description

SickleFlow 120 ARGB 3in1 is our signature cooling performance with a rejuvenated ARGB design to the Cooler Master Fan family, provides a specific air cooling solution ideal for CPU coolers and chassis in-take fans. Optimized blade design with updated curve that improves air flow and air pressure. Enhanced frame structure, reducing turbulent flow and noise and increasing overall work efficiency. Sealed and secured fan bearing, preventing dust and lubricating oil leakage while increasing the fan’s operation stability and life span.

• ARGB Lighting: Signature cooling performance with an ARGB design: a perfect choice for all of the users wanting lighting effects that are individually customizable.
• New Blade Design: Revised curve blade design to improve airflow and air pressure. A refreshed blade for improved lighting.
• Enhanced Fan Frame: Enhanced frame structure, reducing turbulent flow noise increase efficiency.
• Sealed Bearing Structure: Sealed and secured fan bearing, preventing dust and lubricating oil leakage while increasing the fan’s operation stability and life span.

User questions & answers

Question:	So how do these all connect? Does it have an rgb hub or are they all daisy chained? What do I need to buy extra to make them work
Answer:	I sorry for we have not 140mm, but the 140mm fan will have sample in May fans connector is 6PIN, the strip connector is 4pin, please know than
Question:	My motherboard does not support RGB and would like to know what controller would be recommended from the manufacturer
Answer:	yes
Question:	Will they fit the cooler master Q300L
Answer:	They pulse, they can stay constant, they can do all sorts of stuff with the colors i really enjoy them. I have bought multiple packs of them for people's builds, they look & work great.
Question:	Anyone have issue with leds? mine are not working. at all
Answer:	The quick answer is yes with most motherboards. It took a bit to get this working with everything (I have the z470) but basically you are connecting these into the hub that comes with this, and connecting that to your power supply/ pc. The RGBs have the 6 pin thing going on but the hub has the 4 pin and you can pretty much find connection pieces or hub that work with almost any motherboard, but yes definitely yours. My quick review is the one entitled "this can work several ways..." and you can see the MB in the back and in the video.

Product features

SickleFlow 120 V2 ARGB 3n1

SickleFlow 120 V2 ARGB, is our signature cooling performance with a rejuvenated ARGB design, provides a specific air cooling solution. Revised curve blade design to improve airflow and air pressure. A refreshed frosted blade to enhance light dispersion for a more vibrant and luminescent effect. Enhanced frame structure, reducing turbulent flow and noise. Sealed and secured fan bearing, preventing dust and lubricating oil leakage while increasing the fan’s operation stability and life span.

Sealed Bearing Structure

Two-tier sealing mechanism, preventing dust and lubricating oil leakage while increasing the fan’s operation stability and life span.

PWM Fan Control

Dynamically adjust the speed between 650 RPM to 1,800 RPM, minimizing noise or maximizing airflow.

Secure Connection

No more worrying about loose connections. The clip secures both ends in place for easier cable management.

Product description

When ultra-high performance Coolers demand additional performance, count on blade master PWM fan series to increase cooling efficiency. Blade master offers a balance of high Air pressure with balanced airflow and minimal noise levels. With the blade master family of 120mm, 92mm, and 80mm fans, unique wave-form blades create increased pressure that exceeds competitor fans at the same airflow. The highest air pressure allows blade master fans to blow directly through dense performance heat sinks for extreme cooling.

• Well-balanced cooling performance with fan airflow, air pressure, and noise; 10.9 - 40.8 CFM, 13-28 dba
• Wide PWM fan speed range between 600 - 2000 R.P.M.
• Anti-vibration rubber pads around the edges to decrease noise
• Distinguished blade shape for airflow improvement.

User questions & answers

Question:	why does the specs state wide range rpm 600-2000? Can the rpm be controlled
Answer:	a separate fan controller is required, but the fan itself does not have any speed control. the rpm range represents the rated range of speed. 600 being mininum, 2000 is maximum. lower than 600 the fan may stall, higher than 2000 overheat.
Question:	What is the air flow CFM
Answer:	Air Flow (CFM)21.2 - 76.8 CFM
Question:	Do these fans operate on 120v or 12v
Answer:	I believe these are 12v fans.
Question:	Are mounting screws included
Answer:	I only received the 4 screws but were too large to even be able to screw directly to the fan. Even if I take the fan out and try to screw in the 4 screws, none of them fit.

Product description

Up to 90CFM (maximum RPM), up to 90CFM (maximum RPM), RoHS compliance for protecting the environment, Recommended for V10, V8, Hyper 212, Hyper Z600, Gemini, cosmos, cosmos s, haf 932, haf 922, cm storm Scout and Sniper, 50, 000 long life hours.

From the Manufacturer

From the Manufacturer

R4 series fans offer a unity of maximum rotational speed and optimum airflow. Using a unique long-life sleeve bearing fan, the R4 series offers long life rating of 50,000 hours. R4 series fans perform at a maximum of 90CFM at 2000RPM.

Up to 90CFM (maximum RPM). 19 dB-A silent application for CPU cooling. RoHS compliance for protecting the environment. Recommended for V10, V8, Hyper 212, Hyper Z600, Gemini, Cosmos, Cosmos S, HAF 932, HAF 922, CM Storm Scout and Sniper. 50,000 fan life expectancy.

Model	R4-C2R-20AC-GP
Dimension	120mm x 120mm x 25mm
Voltage	12V DC
Current (Ampere)	0.35A
Input (Watt)	4.2W +/- 10%
Speed (R.P.M)	2000 R.P.M
Air Flow (CFM)	Up to 90 CFM
Air Pressure (mmH20)	2.94 mmH20
Fan Noise (dB-a)	19 dB-A
Weight	116g / 0.26lbs
LED Color	No LED
Bearing Type	Long Life Sleeve
Fan Life Expectancy	50,000 hours
Connector	3 pin
3 to 4 pin adapter	1 pcs
Screws	4 pcs

• 69CFM @ 2000RMP (max.)
• 19 dB-A silent application for CPU cooling
• 50,000 Hours Fan Life Expectancy
• 3-pin Fan Connector (3-pin to 4-pin Adapter included)
• 12V DC Voltage, 0.35A Current, 4.2W +/- 10%

User questions & answers

Question:	Will this fan fit in the front of a computer case
Answer:	Depends, my case fits a 200 mm fan. A 120 mm fan is about 4.75", and a 200 mm is just shy of 8".
Question:	Will this fit Mastercase 5 the ones on top
Answer:	Hello Jin,The MasterCase 5 supports a 120mm fan on the top and rear.CM Myke
Question:	Does the "Smoke" version emit any lights like the other versions
Answer:	I have two of the fans in the computer I'm building at the present time and neither one emits any light. I hope that helps you out.
Question:	Why are there three connections? Can I use two of them to plug this fan into a 12v battery
Answer:	No,this is not made to work with 12 volt battery. This is made to work with a computer only. The fan has a length of wire built into it with a 3 pin connector that plugs onto a fan header on the motherboard. The 3 wired included wire harness is to hook up to power the fan with molex power the 4 pin connectors. If you already have all the fan headers of the motherboard occupied by other fans,you can't use the 3 pin connector built onto the fan wire.This is where the 3 wired harness helps. The 3 pin connector snaps onto the 3 pin connector on the fan wire and then you use the molex power the 4 pin connectors to power the fan, and since there is a male on one end and female on the other you have the option to power the fan for the connection you have.

Product description

The ARGB LED small controller is a mini size controller that controls your addressable RGB fan for those who doesn't have an addressable RGB motherboard in hand. With 6 pre-set modes and 7 different single colors option, you can bring your rig to a colorful world.

• Led mode - 6 modes that you can choose from.
• Led speed adjustment - 7 different single colors.
• Thermal detection - when this mode is on, you can tell the temperature by different colors of your Fan.
• Countless colors and effects – certified compatible with as US, MSI, Gigabyte and ASROCK motherboards.
• Compatible devices: Desktop

User questions & answers

Question:	Does this work with the rog asus maximus xi hero wifi
Answer:	This unit does have the read from motherboard ARGB option, so yes. You would plug it into the ARGB uplink connection, and control the lighting with Aura. The question here is why you would need this controller if the Maximus XI already has an ARGB header? CM-PNguyen
Question:	I have msi b450 tomahawk max in a cooler master mb530p with 6 sikleflow argb fans. can i connect all 6 fans to this controller and then to the mb
Answer:	It’s possible with a 1 to 6 splitter to get them working. But to control them Only if your motherboard has an aRGB header then you can use the software. If not you only get the basic options
Question:	Does this support the front fans of the TD-500 case
Answer:	No. the TD500 has RGB fans. This controller is for ARGB devices. CM-PNguyen
Question:	What software does this work with? it seems to have a micro usb connection that goes to the mb usb header. however, what software can control it
Answer:	there is a hack using the h500m firmware https://www.coolermaster.com/catalog/cases/mid-tower/mastercase-h500m/#Downloads and the master plus software though I have to say the effects arent very good as there are no multicolor effects and you cannot customize any animated effects also since these havr 3 pin plugs you can hook up off brand ARGB fans even if they have their own controller as long as they support pass though. but honestly the effects that came with my fans were more interesting. I'm hoping to find other hacks for it. also I cannot find the stock firmware to go back yet, but im sure someone archived it as coolermaster pulled it down

Product features

Addressable RGB LED Controller

• Compact and Convenient
• Countless Colors and Effects
• Compatible with both ARGB and RGB Devices
• Thermal Detection Function

Addressable RGB LED Controller

Convenient and compact design-With built-in magnets, it can be attached to any metallic surface.

Thermal Detection Function

With Thermal Detection Cable, temperature can be monitored and displayed through color lighting effects.

Reset Button

Reset Button on your Case can also control the lighting.

Easy To Switch Between ARGB And RGB Lighting Control

1. LED Mode Adjustment
2. ARGB & RGB lighting Mode
3. LED Color Adjustment
4. LED Speed Adjustment

Product description

MasterFan MF120R ARGB, a new member of the MasterFan family, provides a specific air cooling solution ideal for CPU coolers and chassis in-take fans. Designed for Builders with Addressable RGB-enabled PCs, you can feel the flow with full color fun, and perfect match your PC's theme. MF120R series is fitted with multiple layers of our exclusive noise reduction technologies and a perfect blend of fan blade design that put together work in harmony to cool your entire case and its components in silence.

• Addressable RGB color - addressable RGB that achieves full Color customization. Certified compatible with as ASUS aura, ASROCK RGB, and MSI RGB. Air flow - 59 CFM. Noise level - 25. 0 decibels
• Silent cooling Technology - a mix of noise reduction technology and sound absorbing rubber pads for peace and quiet even when your PC is working overtime.
• Hybrid design - a combination of both Jet engine and helicopter blade designs gives you the static air reassure you need without sacrificing airflow.
• Smart Fan sensor for jam protection - never worry about your cables getting snagged or components being mucked up ever again.

User questions & answers

Question:	How are the mounting holes on the 200mm fans laid out? will they fit in cases with one screw per corner
Answer:	No you don’t need to use all 8 holes
Question:	Me gustaría saver si trae el juego de cables para conectarlos todos a una sola coneccion de corriente y rgb
Answer:	Trae el splitter para conectar el pwm de 3 a 1, y el rgb se conectan uno con el otro, y podes conectar al final a la mb o al controlador
Question:	Please clarify each fan cable distinctly; are the digital argb cables 3-pin and are the pwm power cables 4-pin
Answer:	ARGB is standard 3 pin [00_0] the RGB (non-addressable) option is 4 pin [0000] PWM is 4 pin
Question:	I know it is certified for "asus aura, msi" but can it work with gigabyte rgb fusion
Answer:	They will work with fusion if the motherboard you have has a compatible ARGB header. CM-PNguyen

Product description

Cooler Master, an industry leading chassis, thermal solution, peripheral, and accessory manufacturer, signals the rebirth of a household name in computing, the Hyper 212 EVO CPU Cooler. It comes packed with an improved tower fin design, heat pipe layout, and upgraded fans and fan brackets that provide an even more extreme value for end users of all types. Dents are created when the heat pipes are sealed. The cut and seal is not a damage, after the heat pipe is full, machine will crimp it. Fan Speed: 600-2000 RPM (PWM) ± 10%, 600-1600 RPM (PWM) ± 10% (EU Version).

• Air flow: 82.9 CFM; Noise level: 36.0 decibels
• Fan dimensions:120 x 120 x 25 millimeter (4.7 x 4.7 x 1 inches)
• Heat sink dimensions: 116 x 51 x 159 millimeter (4.6 x 2 x 6.2 inch)

User questions & answers

Question:	AM4 support
Answer:	Hello Mark, Yes, the 212 Black edition does have support the AM4 right out of the box. CM-PNguyen
Question:	Will this fit a AM3+ motherboard
Answer:	Here is a video of my AM3+ motherboard with this fan inside https://www.youtube.com/watch?v=rM34Jzi-6fg and here is a a video on the Noise Level https://www.youtube.com/watch?v=fTQ2dlrpEHI
Question:	Do you add thermal compound
Answer:	Hello, Yes you would apply thermal compound. There is a small tube included with the unit. CM-PNguyen
Question:	noise
Answer:	Much quieter than a dvd rom spinning up.. Only noise is when I’m playing a severely demanding cpu game. Even then it’s barely noticeable at 2500rpm

Product features

Hyper 212 EVO

The Hyper 212 EVO cooling systems are designed and optimized to provide the best user experience and cooling potential for a new generation of processors. The Hyper 212 EVO now features four Cooler Master patented Continuous Direct Contact (CDC) heat pipes that are tightly packed into a flat array on the CPU Cooler base. This acts as a virtual vapor chamber that dissipates a large amount of heat. The aluminum fin structure has been optimized to provide the perfect performance balance.

Product description

Addressable RGB 1-to-5 Splitter Cable  allow users to extend multiple addressable RGB LED fans to build up aesthetically beautiful lighting systems. With the length of 50 cm, you can get the lighting you want without any hassles

• 3 Pin 1-to-5 Addressable RGB connector Splitter Cable Addressable RGB Fans.
• Compatible with ASUS, MSI, GIGABYTE and ASROCK Addressable RGB motherboards.
• Total Length 58cm

User questions & answers

Question:	Would this cause any issues to my motherboard if i use this to connect 4 argb fans? my motherboard is asus tuf gaming x570-plus
Answer:	Should work just fine. I use it as a splitter to Asus ROG terminal. Daisy chaining for ARGB is pretty simple.
Question:	is this compatible with the a-rgb led cooler master small controller
Answer:	Yes, it is.
Question:	i have 5 fans with 8 leds each. Will I be able to address 40 leds or just
Answer:	The splitter will only duplicate one of the fans you have plugged in. CM-PNguyen
Question:	Does this let me address each led for every device attached or will all devices have the same effect
Answer:	It is a basic splitter, you would not be able to address each LED on each of the 5 connectors. CM-PNguyen

Product features

Addressable RGB 1-to-5 Splitter Cable

Connecting More of Your Devices.

3 Pin 1-to-5 Addressable RGB connector Splitter Cable for MasterFan Addressable RGB Fans. Compatible with ASUS, MSI, GIGABYTE and ASROCK Addressable RGB motherboards. Total Length 58cm.

Product description

Master fan Pro 140 Air Pressure RGB with Helicopter-Inspired fan blade, customizable colors, and noise reduction technology.

• 3 RGB fans and a RGB LED controller
• Customizable RGB colors with unlimited color options
• Silent cooling technology
• Smart fan sensor for jam protection
• Certified compatible with Asus Aura, ASROCK RGB, Gigabyte Fusion, MSI RGB

User questions & answers

Question:	Will this fit on any cpu cooler
Answer:	If you’re talking liquid coolers then as long as the radiator will fit a 140 mm fan then yes If you’re talking regular fan cooler then I’m not sure you would have to look at the owners manual for your cooler.
Question:	Does this connect to the rgb header also or just the 2 pin cpu fan on the mobo
Answer:	This fan has 2 4 pin connectors: one is the PWM connector, and the other is for RGB. They will both need to be plugged into the motherboard. CM-PNguyen
Question:	Do the non color fans and rgb fans have the same specs
Answer:	The non-RGB fans have a little more performance too them.RGB Model RPM: 650 - 1,550Non-RGB Model RPM: 650 - 2800
Question:	The description says it consists of 3 rgb fans and a controller. im wondering is this actually a triple pack or a single fan
Answer:	These are actually the single fans. I will has to get the Amazon team to correct this listing. CM-PNguyen

Product features

MasterFan Pro 140 Air Pressure RGB

The MasterFan Pro 140 Air Pressure RGB provides a specific air cooling solution ideally for CPU coolers and chassis in-take fans. Designed for Builders with RGB-enabled PCs, you can feel the flow with full color fun, and perfect match your PC's theme. The MasterFan Pro series is fitted with multiple layers of our exclusive noise reduction technologies and a perfect blend of fan blade design that put together work in harmony to cool your entire case and its components in silence.

Product description

MasterFan SF120P ARGB is our first square fan with addressable RGB lighting effect in Pro segment, provides a specific air cooling solution ideal for CPU coolers and chassis in-take fans. 24 Addressable RGB LEDs on the Fan Frames, you can feel the flow with full color fun, and perfect match your PC's theme. The square frame is designed to maximize area coverage and generate high pressure airflow. SF120P is fitted with multiple layers of our exclusive noise reduction technologies and a perfect blend of fan blade design that put together work in harmony to cool your entire case and its components in silence.

• Addressable RGB Frame Design: 24 Independently-Controlled Addressable RGB LEDS for full color customization.
• Square Fan Design - Sound absorbing rubber pad frame maximizes area coverage and airflow pressure.
• PWM Control: Dynamically adjust speed between 650 RPM to 2, 000 RPM, minimize noise or maximize airflow.
• Software Certified: Compatible with Asus Aura, ASRock RGB, Gigabyte Fusion and MSI RGB

User questions & answers

Question:	Questions. 1) Anything like this in 90~mm? 2) Is there a mounting bracket so I can mount this in one of the expansion slots
Answer:	1- No 2 - No Its just 3 fans wired together.
Question:	Will the RGB allow me to water cool with negative temperatures
Answer:	Yes, exactly like a NASCAR sticker on your car gives you 5 more HP.
Question:	Will this work with a 240 aio cooler? how well does it perform for static pressure
Answer:	It will work, since it's essentially 2 120mm fans wired together. I used one on a 240 and it was OK. Not the best pressure, but not much different than the fans that CM sends with their 24omm AIOs. if you're running a 240 now, you won't see much of a change in your temps, maybe 1-2 degrees or so
Question:	Does this come with an rgb splitter cable? i see it came with a controller, but i am specifically wondering about a splitter cable
Answer:	No, it does not need a splitter cable. This unit combined the cables into 2 cables for ease of installation. CM-PNguyen

Product features

Cooler Master MasterFan SF120P ARGB

MasterFan SF120P ARGB is our first Pro segment square fan with ARGB lighting effect, provides a specific air cooling solution ideal for CPU coolers and chassis in-take fans. ARGB LEDs on the fan frame for the most vibrant display of color. The square frame is designed to maximize area coverage and generate high-pressure airflow. Fitted with multiple layers of our exclusive noise reduction technologies and a perfect blend of fan blade design to cool your entire case and its components.

Square Fan Design

Signature cooling performance in a square frame design to maximize area coverage and generate high-pressure airflow for your case, cooler and liquid cooler.

ARGB Lighting

A perfect choice for all users wanting to individually customize the 24 ARGB LEDs on the fan frame for the most vibrant display of color.

Hybrid Blade Design

A blend of jet engine and helicopter blades, that delivers a non-compromising static airflow to your system or liquid cooler.

Silent Cooling Technology

Noise reduction technology and sound absorbing rubber pads create peace and quiet.

Simple Wires

Easy cable management a single PWM and ARGB header will not only make you less frustrated but also allows the system to run cooler and quieter.

Product description

High Air Flow for maximum cooling performance, quiet operation with low RPM, RoHS compliance for protecting the environment, Compatible with cosmos II, ATCs 840, haf 932, haf 922 and storm Sniper (no LED on/off function support), adds extra cooling for graphics cards when installed on side panels.

From the Manufacturer

Introduction



With the constant development of hardware getting better and better, the energy consumption of your computer rises because you want to get the full performance. Due to this the heat increases and so the requirements of your fan rise as well. To integrate several fans is not the right solution because your computer will get very, very noisy. Bigger fans are the optimal solution for modern high-tech systems. The MegaFlow fan has a diameter of 200mm and so it has a displacement volume of 184 m3/h - twice the volume of 140mm fans.



Application

• Cosmos S
• HAF 932
• HAF 922
• ATCS 840
• CM Storm Sniper

Recommended as a replacement or additional fan for:

HAF 932, HAF 922*, COSMOS S, ATCS 840, CM Storm Sniper*

*Fan and LED will operate but full LED ON/OFF function will not be compatible

Adds extra cooling for graphics cards when installed on side panels.

Specifications

Speed (R.P.M.) 700 RPM

Air Flow (CFM) 110 CFM

Air pressure (mmH2O) 0.595 mm H2O

Noise 19 dBA

Bearing Type Sleeve Bearing

Fan Life Expectancy up to 30,000 Hours

Rated Voltage 12 VDC

Current (Ampere) 0.16 A (Max 0.28 A)

Power consumption 3.36 W

Connector 3 Pin 3 to 4 pin

Adapter 1 pc

LED Color Blue

Screws 4 pcs

Unit Dimensions - 200mm W x 200mm H x 30mm D (7.87 W x 7.87 H x 1.18 D)

Weight - 266g (0.58lbs.)

• High air flow for maximum cooling performance.
• Quiet operation with low RPM.
• RoHS compliance for protecting the environment.
• Compatible with Cosmos S, ATCS 840, HAF 932, HAF 922 and Storm Sniper (No LED On/Off function support).

User questions & answers

Question:	Sorry if a newbie question, but how do the LED lights work, are they part of the connecter that goes to the psu/fan controller, or are they seperate
Answer:	Fan has only one wire that goes into motherboard or your fan control unit. LED will feed from that. If you need to disable it you will have to add a switch or cut translucent wires on the dan itself.
Question:	How many Amps or Watt
Answer:	I am not really sure as I have not measured the current drain - but Cooler Master say the Power Consumption is 3.36 Watt and Current (Ampere) is 0.16 A (Max 0.28 A)I have a 1050 PSU and it was not an issue.
Question:	Are these the fans used in the Cooler Master H
Answer:	They are not. The fans used in cases are actually case specific, but there are retail versions of the fans that are slightly different. The retail version of the fan in the H500 is the MasterFan Pro 200mm. MF200R. CM-PNguyen
Question:	Does it have a 3 pin or 4 pin connector
Answer:	I don't know why the guy's answer that says it's 4 pins is first on this. That's false and I ended up buying this incorrectly because he stupidly said that. Can an Amazon rep remove his answer or something so it stops misleading customers?

Product features

MegaFlow Blue LED

With the constant development of hardware getting better and better, the energy consumption of your computer rises because you want to get the full performance. Due to this the heat increases and so the requirements of your fan rise as well. To integrate several fans is not the right solution because your computer will get very, very noisy. Bigger fans are the optimal solution for modern high-tech systems.