11 best arctic 12v fans

Product description

ARCTIC offers innovative solutions incessantly - changing impossible user requirements into new. Always focused on our customers, ARCTIC is devoted to deliver excellence through a strong dedication and a high sense of commitment. In light of the ever-changing consumer landscapes, we aspire to continue to expand and diversify our products and solutions. From computer cooling and peripherals to audio and digital home entertainment, we strive to enrich people's lives by creating innovative, user friendly yet affordable products with a great value of benefit. For us value for money is a key factor - a constant our customers rely on.

• INNOVATIVE DESIGN: Design of fan blades improves airflow and facilitates efficient ventilation, impeller was designed with a focus on minimzing the noise level yet delivering the desired airflow and pressure
• TWO WAY INSTALLATION: Blow warm air out of the case, draw cool air into your case
• LONG SERVICE LIFE: The Fluid Dynamic Bearing comes with an oil capsule that avoids lubricant leakage, thus this bearing is as quiet as a sleeve bearing but comes with a higher service life
• SAVE YOUR MONEY WITH THE FIVE PACK: By buying this product you will receive five F8 Standard Case Fans, thus saving your money
• TECHNICAL DATA: Fan speed: 2000 RPM, Airflow: 31 CFM/52.7 m³/h (@ 2000 RPM), Noise Level: 0.3 Sone (@ 2000 RPM), Pin: 3-pin

User questions & answers

Question:	would this fit on a dell 8100 xps desktop i7 chip set
Answer:	It depends on your water pressure. If you want to spray to a higher height, we recommend that you add a water pump to increase the water pressure so that our water guns can achieve the best results.
Question:	can this be run with two pin? I'm looking for a 3D printer replacement, and the current fan only has two pins, which I assume is ground and voltage
Answer:	It will not create pressure.This jet washer has a PSI of about 200-300 depending on the pressure of your hose.
Question:	How long is the cable
Answer:	Add detergent to the snow foam cannon firstly. Blue switch is turned on and the snow foam cannon wash indicator is turned to the arrow with the black spout to achieve a lather wash
Question:	without running the fan, which way does the air blow
Answer:	The bristles are medium stiffness. Today I scrubbed with them and they hold with slight give as you push, but hold enough to do well, cleaning without scratching.

Product features

Long Service Life

The Fluid Dynamic Bearing comes with an oil capsule that avoids lubricant leakage. Thus this bearing is as quiet as a sleeve bearing but comes with a significantly higher service life.

Innovative Design Enables Quiet and Efficient Ventilation

The innovative design of the fan blades improves the air flow and facilitates a highly efficient ventilation. The impeller was designed with a focus on minimzing the noise level yet delivering the desired airflow and pressure.

Two Way Installation

You can either blow warm air out of the case or draw cool air into your case.

Highly Efficient

The ARCTIC F8 Case Fan is the ultimate PC-Cooler solution.

Product description

ARCTIC offers innovative solutions incessantly - changing impossible user requirements into new. Always focused on our customers, ARCTIC is devoted to deliver excellence through a strong dedication and a high sense of commitment. In light of the ever-changing consumer landscapes, we aspire to continue to expand and diversify our products and solutions. From computer cooling and peripherals to audio and digital home entertainment, we strive to enrich people's lives by creating innovative, user friendly yet affordable products with a great value of benefit. For us value for money is a key factor - a constant our customers rely on.

• LOW MOTOR TEMPERATURE - 4 X LIFE SPAN: 10°C lower motor temperature doubles the life span, the BioniX gaming fans have a four times longer service life through low coil temperature
• NEW ARCTIC MOTOR: Extremely quiet operation through a newly developed motor guarantees long sessions without annoying noise
• 200 TO 1800 RPM: With a wide range of regulation and the PWM Sharing Technology (PST)
• OPTIMISED FAN DESIGN: We further optimised the fan blade design to get a higher airflow at lower noise generation
• TECHNICAL DATA: Fan speed: 200–1800 RPM, Airflow: 104 CFM/176 m³/h (@ 1800 RPM), Noise Level: 0.6 Sone (@ 1800 RPM), Pin: 4-pin

User questions & answers

Question:	Doesnt the white come in 120mm? (I can only find it in 140mm
Answer:	This item is not big enough for Tal water bottle. I have four Tal bottles and this lip does not fit any of them
Question:	Title is wrong: "arctic bionix f140-120 mm" is not a 120mm fan, but a 140mm
Answer:	No, it is not dishwasher safe! I am looking for a replacement one for my daughter because the rubber/silicone seal inside the lid melted in the dishwasher.
Question:	Would these hold up blowing cool air through my wood stove insert piping? Fans mounting location is barely warm to touch
Answer:	I have a 20oz wide mouth Hydro flask and it does not thread on evenly. It seems like sometimes it will seal properly, so maybe its a temperature thing.
Question:	How are these when inverted? I'd like to run them venting out the top of a case
Answer:	Yes, you can if you are using the large loose-leaves.

Product features

Maximum Quietness, Minimum Vibration

Extremely quiet operation through a specially developed motor ensures long sessions without annoying noise. ARCTIC's motor of the BioniX Fans eliminates vibrations directly at its source, in particular at the motor. Thus, there is no need for rubber spacers due to the steady torque and smoother switching of the magnet field.

200 to 1800 RPM

With a wide range of regulation and the PWM Sharing Technology (PST), the BioniX F140 fan speed can be controlled synchronously with all your other fans together and thus keep the noise at a minimum while ensuring maximum cooling performance when needed.

Optimised Fan Design

We further optimised the fan blade design to get a higher airflow at lower noise generation. This guarantees high pressure and highly efficient ventilation for your gaming case.

Enhanced Bearing

Due to a unique technology developed in Germany, the friction within the bearing is reduced and a greater efficiency is achieved. This way, there is less heat development as well as less bearing noise and you can enjoy a longer service life of your cooler.

Product description

ARCTIC offers innovative solutions incessantly - changing impossible user requirements into new. Always focused on our customers, ARCTIC is devoted to deliver excellence through a strong dedication and a high sense of commitment. In light of the ever-changing consumer landscapes, we aspire to continue to expand and diversify our products and solutions. From computer cooling and peripherals to audio and digital home entertainment, we strive to enrich people's lives by creating innovative, user friendly yet affordable products with a great value of benefit. For us value for money is a key factor - a constant our customers rely on.

• GREATER EFFICIENCY - LESS NOISE AT HIGHER AIRFLOW: At low fan speed, the motor noise is key, a motor developed in Germany with a new alloy/lubricant combination reduced friction and noise
• INNOVATIVE DESIGN: Design of fan blades improves air flow and facilitates efficient ventilation, impeller was designed with a focus on minimzing the noise level yet delivering the desired airflow and pressure
• TWO WAY INSTALLATION: Blow warm air out of the case, draw cool air into your case
• LONG SERVICE LIFE: The Fluid Dynamic Bearing comes with an oil capsule that avoids lubricant leakage, thus this bearing is as quiet as a sleeve bearing but comes with a higher service life
• TECHNICAL DATA: Fan speed: 800 RPM, Airflow: 46 CFM/78 m³/h (@ 800 RPM), Noise Level: 0.08 Sone (@ 800 RPM), Pin: 3-pin

User questions & answers

Question:	I want to use these fans to move air around my indoor hydroponic garden. Is there an adaptor/connection so they can be powered from an outlet
Answer:	The Seaflo 4" fan works excellent. The sound level is much lower than I expected. The air flow is tremendous. Your question: Will a 6 amp adapter power a fan who demands 6 amps. It will but for how long? Your power supply output should always exceed the maximum amperage drain of your device you wish to power. The power supply max. output should be at least 10% greater than the maximum draw of the device. Spend a little more and get a power supply with some margin. You will be glad you did both from a safety aspect and the longevity of the power supply. When you are pushing the power supply to it's maximum capability continuously, the temperature will rise in the power supply. As the temp goes up in the supply, the voltage goes down. When the voltage goes down, the fan speed goes down proportional to the voltage drop. Personally, I would buy a supply whose maximum output it 50% greater than the need of the device to be powered.
Question:	Is it a 4 pin connecter
Answer:	not I wanted too but I realized you couldn't do it. To be small, it does move a lot of air.
Question:	power wires are two, three or four
Answer:	About 24 watts when running. About 50 watts when it is kicking on.
Question:	Which wire is +12vdc and which is Gnd
Answer:	Italy. It is a very high quality product.

Product features

Greater Efficiency - Less Noise at Higher Airflow

At low fan speed, the motor noise is key. A motor developed in Germany with a new alloy/lubricant combination reduced friction and noise.

Long Service Life

The Fluid Dynamic Bearing comes with an oil capsule that avoids lubricant leakage. Thus this bearing is as quiet as a sleeve bearing but comes with a significantly higher service life.

Innovative Design Enables Quiet and Efficient Ventilation

The innovative design of the fan blades improves the airflow and facilitates a highly efficient ventilation. The impeller was designed with a focus on minimzing the noise level yet delivering the desired airflow and pressure.

Different Installation

Exhaust hot air out of the case, intake cool air into the case.

Product description

ARCTIC offers innovative solutions incessantly - changing impossible user requirements into new. Always focused on our customers, ARCTIC is devoted to deliver excellence through a strong dedication and a high sense of commitment. In light of the ever-changing consumer landscapes, we aspire to continue to expand and diversify our products and solutions. From computer cooling and peripherals to audio and digital home entertainment, we strive to enrich people's lives by creating innovative, user friendly yet affordable products with a great value of benefit. For us value for money is a key factor - a constant our customers rely on.

• INNOVATIVE DESIGN: Design of fan blades improves airflow and facilitates efficient ventilation, impeller was designed with a focus on minimzing the noise level yet delivering the desired airflow and pressure
• TWO WAY INSTALLATION: Blow warm air out of the case, draw cool air into your case
• LONG SERVICE LIFE: The Fluid Dynamic Bearing comes with an oil capsule that avoids lubricant leakage, thus this bearing is as quiet as a sleeve bearing but comes with a higher service life
• SAVE YOUR MONEY WITH THE FIVE PACK: By buying this product you will receive five F12 Standard Case Fans, thus saving your money
• TECHNICAL DATA: Fan speed: 1350 RPM, Airflow: 53 CFM/90.1 m³/h (@ 1350 RPM), Noise Level: 0.3 Sone (@ 1350 RPM), Pin: 3-pin

User questions & answers

Question:	Does these have PWM
Answer:	No, please consider F12 PWM Rev.2 or F12 PWM PST. -Justin@ARCTIC
Question:	Is it 4 pin or 3 pin? The earlier answer seems to be guessing. 3 pin is PWM, and 4-pin is both PWM and measured RPM (tachometer pulses) as feedback
Answer:	there are different versions of each type of fan (P or F series) and the different sizes. 3 pin (usually) means voltage control, 4 pin (most of the time) runs in pwm mode. no difference in operating (one better than the other), as long as the board/fan controller recognizes the fan properly, and 3 pins transfer rpm as well. but fan rpm controlled by voltage seems to be a bit smoother at the lower end (~500 rmpand lower), versus the pwm one. then again, the "normal" F/P fans with pwm (0.3 sone) usually allow for lower minimum rpm (down to ~200) versus the silent type about ~350 (0.08 sone)
Question:	What is the difference between Rev. 2 and Rev. 1 - I can't find the differences on their site. Thank you
Answer:	Hi,The Rev 1 is now the PWM PST fan and comes with a PST adapter to add more fans to the same PWM Signal. The Rev 2 is the same fan but without the PST adapter. Best regards,Jens
Question:	Static Pressure? can't seem to fine it any where online
Answer:	Air Flow: 74 CFM / 126 m³/h (@ 1,350 RPM)Noise Level: 0.3 Sone (@ 1,350 RPM)This is from URL: http://www.arctic.ac/us_en/arctic-f12-pwm-pst.htmlThe included manual / instructions say noting but "high static pressure"

Product features

Long Service Life

The Fluid Dynamic Bearing comes with an oil capsule that avoids lubricant leakage. Thus this bearing is as quiet as a sleeve bearing but comes with a significantly higher service life.

Innovative Design Enables Quiet and Efficient Ventilation

The innovative design of the fan blades improves the air flow and facilitates a highly efficient ventilation. The impeller was designed with a focus on minimzing the noise level yet delivering the desired airflow and pressure.

Two Way Installation

You can either blow warm air out of the case or draw cool air into your case.

Highly Efficient

The ARCTIC F12 Case Fan is the ultimate PC-Cooler solution.

Product description

Package include: 1 piece fan include mounting screws & nuts.

Dimensions: 80x80x10mm

Connector:XH2.54-2Pin

Rated Voltage: DC 12V

Rated Current: 0.1 Amp

Rated Speed: 2800 RPM

Air flow: 20.06CFM

Noise: 27 dBA

Bearing Type: Dual Ball Bearings

Life: 50000 hours

Cable Lenght: 30cm or 11.8 inches

Weight: 35g or 1.23 oz

• Dimension: 80mm( L ) x 80mm ( W ) x 10mm( H ) or 3.15''( L ) x 3.15''( W ) x 0.39''( H )
• Rated Voltage: DC 12V; Rated Current: 0.1 Amp; Rated Speed:2800RPM; Air flow: 20.06CFM; Noise: 27 dBA
• Bearing Type: Dual Ball Bearings; Life: 50000 hours
• Cable Lenght: 30cm or 11.8 inches; Weight: 35g or 1.23 oz
• Package include: 1 piece fan include mounting screws & nuts

Product description

ARCTIC offers innovative solutions incessantly - changing impossible user requirements into new. Always focused on our customers, ARCTIC is devoted to deliver excellence through a strong dedication and a high sense of commitment. In light of the ever-changing consumer landscapes, we aspire to continue to expand and diversify our products and solutions. From computer cooling and peripherals to audio and digital home entertainment, we strive to enrich people's lives by creating innovative, user friendly yet affordable products with a great value of benefit. For us value for money is a key factor - a constant our customers rely on.

• INNOVATIVE DESIGN: Design of fan blades improves airflow and facilitates efficient ventilation, impeller was designed with a focus on minimzing the noise level yet delivering the desired airflow and pressure
• TWO WAY INSTALLATION: Blow warm air out of the case, draw cool air into your case
• LONG SERVICE LIFE: The Fluid Dynamic Bearing comes with an oil capsule that avoids lubricant leakage, thus this bearing is as quiet as a sleeve bearing but comes with a higher service life
• TECHNICAL DATA: Fan speed: 1800 RPM, Airflow: 43 CFM/73.1 m³/h (@ 1800 RPM), Noise Level: 0.4 Sone (@ 1800 RPM), Pin: 3-pin

User questions & answers

Question:	What kind of connector? 2 pin? is this 12v? how many amps
Answer:	WHAW222BW
Question:	What is the max RPM of the 90mm (92?) connected directly to 12v
Answer:	Window width: 30" min / 41" max Minimum window height: 19.5"
Question:	How many amps will the f9 silent draw? same question for the f9 standard. assume 12vdc. thanks
Answer:	This unit requires a special 230V electrical Outlet and will not operate with a standard 115V household electrical Outlet. as the above description says! SO it would need a NEMA 6-15P Plug or maybe a NEMA 6-20P the NEMA 5-15 is a regular household plug for "120 Volt"
Question:	Does the fan turn off below 32C or just slow down to ~500rpm
Answer:	Hi there. I wouldn’t think so as this fit my 18 & 24oz Takeya bottles. This lid measures 2.75”. The round mouth (no lid) of my water bottle is 2.25” I hope this helps

Product features

Long Service Life

The Fluid Dynamic Bearing comes with an oil capsule that avoids lubricant leakage. Thus this bearing is as quiet as a sleeve bearing but comes with a significantly higher service life

Innovative Design Enables Quiet and Efficient Ventilation

The PWM function allows the motherboard to run the fan precisely at its necessary speed. This ensures the required cooling and minimizes the noise level.

Two Way Installation

Blow warm air out of the case, draw cool air into your case.

Highly Efficient

The ARCTIC F9 Case Fan is the ultimate PC-Cooler solution.

Product description

ARCTIC offers innovative solutions incessantly - changing impossible user requirements into new. Always focused on our customers, ARCTIC is devoted to deliver excellence through a strong dedication and a high sense of commitment. In light of the ever-changing consumer landscapes, we aspire to continue to expand and diversify our products and solutions. From computer cooling and peripherals to audio and digital home entertainment, we strive to enrich people's lives by creating innovative, user friendly yet affordable products with a great value of benefit. For us value for money is a key factor - a constant our customers rely on.

• OPTIMISED FOR STATIC PRESSURE: During the development of the new P12 PWM PST, special emphasis was placed on a focused airstream and thus a high static pressure
• 200 TO 1800 RPM REGULATED VIA PWM PST: Thanks to 4-pin connector, the RPM can be regulated in a broad spectrum via PWM, noise is kept at minimum while maximum cooling performance is given when needed
• MORE EFFICIENT TECHNOLOGY: The motor is powered by a Neodym-Iron-Boron-Magnet ring of the newest generation, which allows the new P12 PWM PST to run much more efficiently than its predecessors
• EXTENDED LIFE SPAN: A 10 °C lower motor temperature roughly doubles the life span of a fan, the new ARCTIC motor has a four times longer service life through its low coil temperature
• TECHNICAL DATA: Fan speed: 200–1800 RPM, Airflow: 56.3 CFM/95.65 m³/h (@ 1800 RPM), Noise Level: 0.3 Sone (@ 1800 RPM), Pin: 4-pin

User questions & answers

Question:	Do you have a whining noise on different rpm? my sounds unbearable
Answer:	made for wrestling action figures
Question:	Can it be connected to 3 pin fans
Answer:	yes they do
Question:	The pst connections has only 3 pins. Will the speed be the same has the main fan that has 4 pins connected on to the 4 pin motherboard ? Bios in pwm
Answer:	Ring is a decent size for toys.
Question:	Do these fans come with screws or rubber pins to mount the fans, or are those bought separately
Answer:	they are plastic

Product features

Optimised for Static Pressure

During the development of P12 PWM PST, special emphasis was placed on a focused airstream and thus a high static pressure. The fan ensures extremely efficient cooling, even with increased air resistance. Therefore, the P12 PWM PST is particularly suitable for use on heatsinks and radiators.

More Efficient Technology

The motor is powered by a Magnet ring, which allows the P12 PWM PST to run much more efficiently than its predecessors. This saves energy and lowers the coil temperature without comprimising the performance.

200 to 1800 RPM regulated via PWM

Thanks to the 4-pin connector, the RPM can be regulated in a broad spectrum via PWM. In this way, noise is kept at a minimum while maximum cooling performance is guaranteed when needed.

High Quality Bearing

Thanks to a special technology developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. As a result, there is less heat development as well as less bearing noise, which means you can enjoy a longer service life from your fan.

• ❤ HIGH SPEED 1600RPM :120 x 120 x 25 mm quiet 120mm power supply PSU RV fan pc computer fan 1600RPM (73CFM each 146CFM total) low noise 120mm fans for desktop pc computer power supply or other eletronics equipment heatsink radiator.
• ❤ 12V DC :Small Size 12v cooling fan for power supply rv refrigerator dc 120mm 0.25a cooling fan mini dc fan 120mm 1600RPM,With PBT material,good insulation and heat resistance,tough and durable quality .
• ❤ EASY 2PIN CONNECTOR:120mm 2Pin 2.54 connector fans with connection protection,easy installation and replace operation,even wrong connected,fan will not burn but just not work.
• ❤ LONG LIFE BEARING :Long Life Sleeving Bearing cooling fan,this makes sure the Required Cooling and Minimizes the Noise Level.
• ❤ 100% 90 DAY MONEY BACK : If you are not satisfied for any reason, simply return your product for a full refund, no questions asked. You have nothing to lose.

User questions & answers

Question:	Are wires color coded...Which wire is positive or negative
Answer:	Yes, they are. Red = positive, black = negative.
Question:	One of the fans i purchased failed to operate. How can I get a replacement
Answer:	Request a return authorization from Amazon.
Question:	Can I hook this directly to a 12 volt power sorce without a controller just a toggle switch
Answer:	Yes you can, I did and it ran all winter in the top of a door jam to move warm air. Works great.
Question:	Hi what amp are these
Answer:	.25 amp

Product features

ABOUT CONNECTOR (IMPORTANT!) NOT FOR PC CASE

2 Wire XH2.54 Connection with Reversing Connection Protection; This is 2pin XH2.54 connector cooling Fan ,normally for PSU ,power supply and other DIY greenhouse ,fish house,industrial cooling work ,can not compatible with 3pin or 4pin pc case fan port unless you want to do some revision work.

Professional Factory with Various Design and Size Optional

Our Own Professional Factory With Various Design and Size Optional and Customer-Made Service Provided for Large Qty order

• Premium quiet fan, 60x60x25 mm, 12V, 4-pin PWM, max. 3000 RPM, max. 19.3 dB(A), >150,000 h MTTF
• Award-winning 60x25mm A-series fan with Flow Acceleration Channels and Advanced Acoustic Optimisation frame for superior quiet cooling performance
• Ideal replacement for noisy or broken 12V 6cm fans in DVRs, NAS, network and storage devices, 3D printers, etc.
• 4-pin PWM version for automatic speed control via 4-pin PWM fan headers, broad 550-3000rpm speed range (2100rpm max. with supplied Low-Noise Adaptor)
• Includes anti-vibration mounts, fan screws, Low-Noise Adaptor, extension cable and y-cable for running two PWM fans on the same header

User questions & answers

Question:	Can you convert this from 4 pin to 2 pin
Answer:	yes, it can be. it is one CBB65 run capacitor for compressor or other single phase motor. of cause please check your old capacitor's parameter and size and shape. notice it is one oval capacitor.
Question:	Can this be mounted in place of a 50x50mm fan
Answer:	No, it doesn work with comfort-aire bg101p Following item can work with comfort-aire bg101p https://www.amazon.com/dp/B074BW4X5P
Question:	Can someone explain how this differs from the non-pwm version? Is it just the number of wires? IF so why would one select that over the alternative
Answer:	NO， it doesn't work with rads-121j， following item working with rads-121j https://www.amazon.com/dp/B074BW4X5P
Question:	Is this really a 4-pin pwm fan? the noctua site lists it as 3-pin
Answer:	Two vents that operate (manually) independently. Side to side is easy. Just checked, since you asked, with some pressure you can get them to angle somewhat up or down or straight ahead. Hope that helps.

Product features

AAO frame

Noctua's AAO (Advanced Acoustic Optimisation) frames feature integrated anti-vibration pads as well as Noctua's proprietary Stepped Inlet Design and Inner Surface Microstructures, both of which further refine the fan's performance/noise efficiency.

Reduced motor hub size

Thanks to its streamlined, compact motor design, the NF-A6x25's motor hub is smaller than with conventional 6cm fans. This allows for more blade surface area and thus contributes to the NF-A6x25's superior airflow and pressure performance.

SSO2 bearing

The NF-A6x25 features the further optimised second generation of Noctua's renowned, time-tested SSO bearing. With SSO2, the rear magnet is placed closer to the axis to provide even better stabilisation, precision and durability.

Flow Acceleration Channels

The NF-A6x25 impeller features suction side Flow Acceleration Channels. By speeding up the airflow at the crucial outer blade regions, this measure reduces suction side flow separation and thus leads to better efficiency and lower vortex noise.

Scope of Delivery

• Low-Noise Adaptor (L.N.A.)
• 4-Pin Y-Cable
• 30cm Extension Cable
• 4 Vibration-Compensators
• 4 Fan Screws

• The standard 120mm computer case fan, compatible with the different types of chassis. High-performance fan for the CPU heatsink and water cooling system.
• The design is user friendly interface: a 3pin 4pin two interface design, compatible with any motherboard, power supply plug or other devices.
• Super Silent PC Heat Sink: all copper motor and rugged. hydraulic press bearings with self-lubricating antifriction material, reduce operating noise, improve efficiency, and run the noise less than 25 decibels.
• High-speed and high-brightness LED design, easy to install and improve airflow to maximize airflow for High capacity cooling, let your PC more durable.
• The quality assurance: If you have any questions, please contact us. The quality of our products, and will do our utmost to quickly and efficiently resolve your issue.

User questions & answers

Question:	Does the wire harness include standard wall outlet cord
Answer:	Yes
Question:	Can you change the colors from the motherboard when plugged in
Answer:	The ones I received are both white.
Question:	I plugged the fans into a working fan header and the lights turn on without the fans spinning. How do I fix this issue
Answer:	Thank you for your interest in the Tea Forte Tea Tray. We do no have the Tea Tray black color option available on Amazon.
Question:	The screws seem too thick for the fan. The holes are not or threaded. When securing most of the screws cracked the holes
Answer:	No power supply. Cord plugs into a charging port; not wall.

Product features

Superior RGB LED illumination effect

The Conisy AL-120 LED case fan boasts 32 independent RGB LEDs light to create vibrant lighting and visual effects.Elegant and soften blue lighted effects perfect match your PC's theme.

Hydraulic Bearing Design

The hydraulic bearing self-lubricates with a high quality, friction-reducing substance which lowers operating noise and improves efficiency. The seal cap prevents leakage of the lubricant, and improves the lifespan of the unit, service life of more than 30,000 hours.

Created for Quiet

Unique 9 blades design is engineered to generate higher airflow without compromising on ultra-silent operation.Ultra-thin fan blades ensure less vibration, noise and turbulence.

Silent operation as an excellent choice for case cooling.

Two way installation:

Blow warm air out of the case. Draw cool air into your case.

They are ideal for mounting at the rear or top of your PC case as exhaust fans for your PC's motherboard and CPU, graphics accelerators, and other components that fill the case with heat.

and They are ideal for mounting at the front or bottom of your PC case as intakes fans.

Compatible:

3-pin power connector for powered by motherboard

IDE 4-pin power connector for powered by PSU power supply

IMPORTANT NOTE: Use ONLY One Type of Power Connection at a time. You may short circuit your motherboard if you connect both connectors at a time.

Support multiple fans through IDE 4-pin Concatenation.

• High performance cooling fan, 120x120x25 mm, 12V, 4-pin PWM, max. 1700 RPM, max. 25.1 dB(A), >150,000 h MTTF
• Renowned NF-P12 high-end 120x25mm 12V fan, more than 100 awards and recommendations from international computer hardware websites and magazines, hundreds of thousands of satisfied users
• Pressure-optimised blade design with outstanding quietness of operation: high static pressure and strong CFM for air-based CPU coolers, water cooling radiators or low-noise chassis ventilation
• 1700rpm 4-pin PWM version with excellent balance of performance and quietness, supports automatic motherboard speed control (powerful airflow when required, virtually silent at idle)
• Streamlined redux edition: proven Noctua quality at an attractive price point, wide range of optional accessories (anti-vibration mounts, S-ATA adaptors, y-splitters, extension cables, etc.)

User questions & answers

Question:	Does this come with a molex connector
Answer:	No
Question:	Will the pwm control on this fan stop it completely even with power to +12v/gnd
Answer:	I bought this as an accessory to the ring and my daughter said the bigger guys worked well. Sorry that's not more help. I think their figures were the 3" or 4" ones.
Question:	Is this an airflow fan or a static pressure fan
Answer:	They do break apart but are easily able to be put back together
Question:	How many cfm, or cubic feet per minute
Answer:	They're 6 inches

Product features

Proven NF-P12 design

Tens of thousands of quiet cooling enthusiasts around the globe swear by Noctua's classic NF-P12. Thanks to its impressive quietness, excellent performance and impeccable quality, the NF-P12 has become an established reference for quiet 120mm fans.

Pressure-optimised Nine-Blade Design

Specifically developed for high-impedance applications such as CPU coolers, water-cooling radiators or cases with tight fan grills, the NF-P12's nine-blade impeller provides outstanding pressure and airflow performance.

SSO-Bearing

Combining the proven concept of hydrodynamic bearing with an additional magnet that supports the self-stabilisation of the rotor axis, Noctua's time-tested technology has become synonymous with supremely quiet operation and exceptional long-term stability.

Vortex-Control Notches

Noctua's signature Vortex-Control Notches split up trailing edge vortices and thus spread the fan's noise emission over a wider range of frequencies. This measure makes the fan sound more pleasant to the human ear.

Colour-customisable with NA-SAVP1 anti-vibration pads

The fan’s frame can be outfitted with Noctua’s chromax line NA-SAVP1 anti-vibration pads. Available in black, red, blue, white, green and yellow, these pads not only damp minute vibrations but also allow the fan to be colour-customised in order to coordinate it with popular build colour schemes!