14 best kvm switch with remote controls

Product description

2 Port USB HDMI Cable KVM Switch



To help organize desks without sacrificing work space, this compact HDMI USB KVM switch has an integrated cable that can be directly connected to 2 computers,you can share 1 set console(Mouse & Keyboard) and HDMI monitor with both systems, while taking up very little space.

Features:

1.Exquisite appearance,easy installation.

2.Support Windows X,Apple,MAC,Linux,Netware,Unix operating system and so on.

3.Support different kinds of Digital Visual Recorder(DVR)

4.Support different kinds of mouse and keyboard(Mechanical keyboard/Wireless mouse and keyboard)

5.LED indicator or screen indicates the current PC status.

6.With PC auto scan function,the scan interval can be set by user.

7.Supports HD resolutions (4K*2K@30hz)

Installation Steps:

1.Connect the HDMI ,USB cable on the kvm switch to the PCs.

2.Connect the mouse and keyboard to the KVM console end.

3.Connect the monitor or TV to the HDMI port on the KVM console end.

4.Connect the Button to the KVM switch.

5.When the monitor connected to the KVM switch at the first time:Press and hold on the button for over 3 seconds,the two LEDs on the KVM switch wil be on,then off,then on again over 3 seconds,till the virtual monitor set finished,only one LED will be on.The Virtual monitor refreshed,set and restored.

6.Power on the PCs in sequence,after one PC booted(the mouse and keyboard can operate normally),boot the next one,till all the PCs botted.



NOTE:



If there is no signal from HDMI output，you need to do these:

Press and hold on the button for over 5 seconds, the two LEDs on the KVM switch will be on, then off, then on again over 3 seconds, until the virtual monitor set is finished, and only one LED will be on. The virtual monitor is now refreshed, set, and restored.

Disconnect the KVM from the monitor and the PCs.

Re-connect the KVM to the monitor and the PCs, then bootup the PCs in sequence, one by one.

• 2 in 1 out HDMI USB KVM Switch - 1 USB console(Mouse & Keyboard) and 1 Monitor control 2 HDMI interface computers /DVR/NVR with wire button switch,saving space on your desk and using your display.
• 4K KVM SWITCH - Support 4K*2K@30hz,1080P HD,1080i,720p,480p, 480i.Support HDMI Digital Monitor, Fully Compliant with HDMI1.4a ,HDCP.
• COMVENIENT WIRED REMOTE SWITCHING - A 1.25m long wired remoter which allows you to simply switch between 2 computers / laptops by a button without reaching out to a distance beyond arm’s reach.
• WIDELY COMPATIBLE - Support Windows X,Apple,MAC,Linux,Netware,Unix operating system and so on.
• EASY TO USE - Plug and play，no software to install; USB 2.0 Peripheral Sharing via mouse port.Package:1 x KVM Switch,1 x Wired Remote Switch.

• The Cable Matters 4 Port USB 3.0 Switch selector is the ideal solution for sharing up to four USB peripherals with up to four separate computers; Use the USB KVM to eliminate the need for swapping cables and peripherals between desktops, laptops, and other equipment; Four host buttons allows the USB switch selector to swap between hosts with a single button press of the USB toggle switch
• Remote controlled USB KVM switch includes a remote control for instantaneously switching USB peripherals between host computers; Store the 4 port USB switch behind a desk or in a crowded equipment rack and use the remote control to switch host devices; USB switcher remote control can be disabled for use in RF-sensitive environments
• USB switch 4 computers reduces cable and accessory clutter; Use the keyboard mouse switch to use one keyboard, mouse, printer, and USB hard drive with up to four computers; Eliminate the need for separate workspaces with the USB 3 switch; USB sharing switch ensures your devices are always ready to go with one push of a button; On Windows hosts only, connect monitors to the USB hub switch using a compatible USB 3.0 to HDMI adapter (sold separately)
• The 4 port USB hub supports USB 3.0 speeds of up to 5Gbps; Keyboard mouse switch is backward compatible with USB 2.0 peripherals and works as a USB 2.0 switch; USB C switch supports USB-C and Thunderbolt 3 hosts with the included USB C to USB-A adapter; Keyboard and mouse switch provides flexibility for USB-C and USB 3 hosts
• USB hub is bus-powered and supports most devices with no external power needed; AC adapter is included for optional external power for devices which may require more power; Built-in on/off switch on the keyboard switch for power cycling or power saving support without needing to disconnect cables

User questions & answers

Question:	Do I need to Eject this device (and attached thumb drives) when switching between each computer
Answer:	No, unfortunately I took good care of my Hunter boots. But, I had a friend tell me there was stuff to clean them and get the scuffs off. I ordered that product, which was authentic Hunter, and it has ruined my boots. I followed instructions perfectly.
Question:	Does this switch work with usb video adapters
Answer:	still looked cloudy and the kit I received had to be sent back because the expire date was out!! Olive oil still the best
Question:	If connected to usb-c power adapter does that power the usb hub ports
Answer:	Yes it keeps them moisturized so they don’t crack
Question:	So I am assuming this doesn't come with 4 usb to usb cables? Seems priced pretty high to also have to buy 4 separate usb to usb cables
Answer:	As long as the circuit is drawing at least .2 amps

Product features

The Ultimate Workstation Accessory

The Cable Matters USB 3.0 Switch is the ultimate accessory for a multiple-device workstation. Share high-speed USB 3.0 and USB 2.0 peripherals between up to four of your devices, eliminating the need for separate pairs of keyboards, mice, and printers for each computer. An included adapter adds support for USB-C or Thunderbolt 3 hosts. Easily swap laptops in and out of your workspace without having to unplug multiple USB cables.

Important Notes

• Connect the included AC adapter to use external hard drives or other USB devices with high power requirements
• Use the included USB 2.0 extension cable to connect wireless keyboard/mouse dongles or other wireless USB devices

Four Hosts, Four Peripherals

• Four micro-B 3.0 ports connect up to four computers or laptops to the switch with the included micro-B to USB 3.0 cables
• Four USB 3.0 ports connect up to four peripherals to the switch Set the active host with a push of a button, and all four connected peripherals will connect to the active host
• The included adapter adds support for USB-C or Thunderbolt 3 laptops

One-Touch Switching

• Unique design includes four LED-lit buttons to effortlessly swap between hosts with the push of a single button. No need to press a button multiple times to cycle between hosts
• Ideal button placement provides space to attach labels, so you can easily keep track of which button controls which host

Feature-Filled Switch

1. 4x laptop connectors
2. USB peripheral connectors
3. Source switching buttons with active source LED lighting
4. On/Off Switch
5. USB-C port for optional power (AC adapter included)

Remote, Not More Wires

• An included remote control allows for quick, easy switching of the host computer with the push of a single button
• Easily mount the USB switch in an equipment cabinet or behind the computer and still control it from your desktop. Wireless remote eliminates the need for a tethered pop-out switcher that just adds more cable clutter
• Remote control can be disabled in situations where RF interference may be an issue

Built-in On/Off Switch

• The switch includes a unique on/off switch to prevent power drain when the switch is not in use
• Reset the switch by power cycling it, eliminating the need for unplugging and reconnecting wires

5 Gbps Data Transfer

• USB 3.0 supports a transfer rate of 5Gbps
• Transfer a full-length HD movie to a USB 3.0 flash drive in under one minute
• 10x faster than USB 2.0 speed
• Plug & play, no driver required
• Universally compatible with all OS

Maximum Compatibility

• Compatible with computers with USB 2.0, USB 3.0, USB-C, and Thunderbolt 3
• Included USB-C adapter allows for connecting laptops with only USB-C or Thunderbolt 3 ports. Easily add more USB-C computers by purchasing additional cables or adapters

Package Contents

• USB sharing switch
• Remote control
• USB-C to USB-A adapter
• USB extension cable
• AC adapter
• User manual
• 4x Micro-USB 3.0 to USB-A cables

Product description

This 2 port DisplayPort KVM switch with audio and remote control switching lets you control two DisplayPort, USB equipped PCs with a single monitor, keyboard, mouse and audio peripheral set.

Compact Design

To help organize your desk without sacrificing work space, this compact DisplayPort USB KVM features integrated cables that can be connected directly to your system, while leaving a minimal footprint. This DP KVM switch is also designed with a remote push-button on a 5ft (1.5m) integrated cable that can be placed in an easily accessible location, as well as keyboard hot-keys, and PC or Mac compatible software for switching between systems.

To eliminate the need for a bulky external power adapter and wall outlet, the DP KVM switch is USB-powered.

Increase Your Productivity

This DisplayPort USB KVM switch offers dual system control for single user workstations which helps increase your productivity in the office or at home. This KVM switch is also the perfect solution for sharing computers and attached peripherals.

High Resolution Support

This KVM with DisplayPort video capability offers support for resolutions up to 2560x1600 for the ability to drive a large DisplayPort display for applications that require high graphical output.

This dual port KVM switch with audio and remote switching is backed by a StarTech.com 2-year warranty and free lifetime technical support.

• CONTROL TWO COMPUTERS: Create a simplified workstation with two computers with this 2 port DisplayPort KVM switch with audio and an integrated remote switch
• HIGH RESOLUTION SUPPORT: This cable KVM switch supports resolutions up to 2560x1600 @60Hz for the ability to drive a large DisplayPort display
• SPACE SAVING DESIGN: This dual port DP KVM switch is designed to be compact and features a small footprint to save desk space. It is powered by the USB port so no external power cords are required
• ULTIMATE COMPATIBILITY: The switching software on this KVM switch supports both PC and Mac platforms for broad compatibility
• RELIABLE SUPPORT: Backed by a StarTech.com 2-year warranty, this DisplayPort USB KVM switch has free lifetime technical support

User questions & answers

Question:	how does the usb work between computers? im confused
Answer:	On each computer you connect an HDMI, USB, sound out, and mic. These are the connectors on the end of the long cables. The switch box has an HDMI for your monitor, Sound connectors for speakers and mic, and 2 USB connectors for Mouse and keyboard. If you have a wireless keyboard mouse combo you only need one of the USB ports on the switch box. The USB doesn't work between the computers, it connects the keyboard/mouse to the computer you are using.
Question:	is this usb 2.0 or
Answer:	3.0
Question:	Will this work with an hdmi to display port converter? Like this one: https://www.amazon.com/dp/B0144NS4Z6/ref=psdc_3015395011_t1_B01BXMOREI
Answer:	It should, yes. I've been using an HDMI to ThunderBolt port converter to connect my MacBook Pro for years, and it's never had any problems.
Question:	Does this switch support a 2560x1440/144Hz G-sync monitor
Answer:	I currently have no problem with my #1 machine, but occasionally my #2 machine will come up in the next resolution down. It can be fixed on screen easily enough, but my last switch (same make & model) experienced the same pattern, but it grew more frequent over time until both machines were loading up in the lower resolution. Eventually I solved the problem by installing standalone graphics cards in both machines, but the switch eventually failed after about 3 years. I bought the same one because I saw nothing (switches) out there that was intended to support the 2560x1440 resolution as being native.

• 【2 Port HDMI KVM Switch】edola USB HDMI Kvm Switch supports control 2 computers by a mouse, a keyboard and a display. It is easy to operate, improves work efficiency, saves the cost of use, and is widely used in various fields.
• 【4K@60hz Resolution Supported】 Support HDMI Digital Monitor, Fully Compliant with HDMI 2.0, HDCP, Support 4K*2K@60hz (Please Note: NEED to using HDMI 2.0 AWG24 cable).
• 【3 Switching Ways & IR Remote Control】 The HDMI KVM Switch support 3 Switching Ways for easily switching: Key-press switch, Remote switching, and Control button switch. IR remote control will be more convenient and easier to use.
• 【Plug and Play】 Plug and play, no extra power required. Connect a powered USB Hub to expand your USB connectivity; Port switching via remote switch button. The product will have a very low delay when the transmission of high-definition pictures.
• 【Wide Application】 This HDMI KVM Switcher compatible with most operating systems including Windows, Apple, MAC Linux, Netware, Unix, Android, and other USB supported systems( not for video cards).

User questions & answers

Question:	What is the length of the supplied cable from the plug into the kvm till it separates into 2 cables (the hdmi & usb parts
Answer:	Yes. My mother-in-law loves the fit too.
Question:	Do I need a seperate power suppy to operate this splitter
Answer:	My patient used these diapers for fecal incontinence (diarrhea type) with no problem. Just remember to change often (urinary or fecal) and clean the affected body area with soap and water with every change.
Question:	For the ethernet cable, will it work with a power line adapter on the same network ? (such as the tp link
Answer:	I was so glad to see a size L I didn't notice it doesn't say for men or women like most do. We've used 1 pkg of these and, yes, they work for men, but I don't see why they wouldn't work for women too. Most of these pull-ups work nicely, but our problem has always been the L/XL was too loose around the legs so they leaked every time. These are much better. You also want to watch for absorbency factor, especially as the problem worsens.
Question:	I plugged everything in and there is no signal even though the usb switching works. What should I do
Answer:	No. Just difference in price. AmazonPrime usually costs more.

Product features

How to solve the problem that the mouse and keyboard cannot be switched when the computer restarts after hibernation?

1. Open "Control Panel" of the computer, and go to "Control Panel Home",
2. Go to "Systems and Security",
3. Go to "Change Computer Sleep Time",
4. Go to "Change Advanced Power Settings",
5. Select "Never" and then "YES".

Please Note:

• Do not support the Laser Mouse.
• Cannot switch when the computer is in standby, you need to wake up the computer first.
• Come with IR receiver and IR remote control, but Not include line control buttons.
• Can not be used in DP, and there is no EDI function.
• Please open the battery cover of the remote and take out the insulator before use.
• Does not support split-screen connection.
• Does not support UHD.

IR Remote Control

Plug and Play

Support 4Kx2K@60hz

HDMI KVM Switch with 3.9ft Cable

Product description

This 8 port KVM switch applied to 8 VGA interface devices share 1 set of keyboard and mouse and 1/2 displays duplication output, note: not supports extended display

For computers, game consoles, set-top boxes, DVD, TV, notebook, projector, monitor, etc.

What in the package:

1 pcs 8 port KVM switch

8 original KVM Cables

1 pcs User manual

1 pcs remote control

1 pcs 12V 1A power adapter

1 pcs IR extension cord

2 pcs Frame buckle

• Manual remote control Switch and Button Press Switch, Rack mount design.
• Supports 8 PCs vga input 2 vga duplication output(note: not supports extended display), max. resolution 1920x1440, a set of the keyboard and mouse sharing 8 PCs. Note: The BASIC keyboard and mouse is recommended to the kvm switch, Do not support any game/multimedia/mechanical keyboards or special keyboards!!!
• supports WIN DOWS9X, NT, WIN2000, WINXP, WIN7, LINUX, NOVELL and other operating systems.
• Easy to install and Operate, 8 USB+VGA combined KVM cables included (Audio cables not included), high quality and durable cables to offer security and stability in the process of access and operation.
• Applied to internet data center, information control center, telecom paging system, securities / futures trading system, data center industry Control environment, teaching environment, test center, video surveillance, power plant monitoring, etc.

User questions & answers

Question:	Does this support audio in addition to mouse, keyboard, and monitor
Answer:	No it is not mature in the way card against humanity. It has some clues that a child might not know or understand but it is appropriate for teens and older children.
Question:	How long are the cables
Answer:	I do not believe so - not at this time, anyway.
Question:	How does this device handle 240p and 480i inputs? Does it output the native input resolution or does it upscale to different resolution
Answer:	Hi there, thank you for your question! Unfortunately at this time we don't have any expansion packs/cards available, we apologize for the inconvenience.
Question:	Where can I download the manual for this device? I cannot find a good link anywhere on the net
Answer:	The game is appropriate, but I don't know if your 11 year old daughter will know how to draw 2001: A Space Odyssey.

• Share one monitor USB keyboard and Mouse between two USB-compatible computers using the Rosewill RKV-2UC 2-port USB KVM switch
• The built-in VGA connector supports monitors with resolutions of up to 2048 x 1536
• The Rosewill RKV-2UC 2-port USB KVM switch supports multiple platforms including Windows and Mac computers as well as sun Solaris workstations

User questions & answers

Question:	Anyone use this just for kb/mouse but not video? i use an hd tv as a monitor and have extra hdmi on the t.v. so only need the kb/mouse functions
Answer:	I donated it to the senior community
Question:	The switch fails about 1 of 100 switches and I can't recover mouse/keyboard function without restarting the system I am switching to. Any fixes
Answer:	Hi there, This brace is specifically designed to support the entire lumbar spine, all the way from the L1 to the L5 vertebrae. This area of the spine is often the culprit for any type of lower back pain.
Question:	Does it work with Linux
Answer:	Mark, thanks for your question and Amazon is doing some testing with some of their fields and if you click on the rectangle that states 1 Count (Pack of 1) this is the size Large. We are sorry for any confusion. Please let us know if you have any other questions. Thanks for asking!
Question:	Can you use a keyboard key/hot key to switch computers
Answer:	The quality is okay, but it is not the best brand. If you want a big brand and a suitable price, I recommend you to ZSZBACE. COM. I bought it. The Lumbar Supports quality is indeed much better, And it's discounting now

• Instant switching with button controller; switch between two DisplayPort computers and control them from a single keyboard, monitor and mouse
• Simply plug and play by connecting the PCs you want to control with your set of peripherals; supports any Windows, Mac, Linux system combination; does not require drivers or software installation
• 4K@30Hz Ultra HD video resolution; supports DisplayPort 1.1 and HDCP compliant monitors, USB keyboards and USB mice; includes connectors for audio and microphone

Product description

HDMI EXTENDER WITH KVM

Change the mode of audio and video signals for longer distance transmission, HDMI IN --- CAT X --- HDMI OUT.

Specifications:

1.Video

- Standards---HDMI 1.3

- Maximum pixel clock---165MHz

- Maximum data rate---6.75Gbps

- Resolution---1920X1080@60Hz

- Connector---HDMI-A

2.Ethernet

- Interface---RJ45

- Transmission distance---CAT6---50m/164ft; CAT5E---40m/130ft; CAT5-30m/100ft

3. KVM/USB

- Interface protocol---USB1.1

- Interface type --- PC: USB-B;  KVM: USB-A

- Signal type --- Digital signal

4.Others

- Power supply--- Input: 110~220V; Output: 12V/1A

- Power dissipation---MAX 3W

- Temperature---Operating: -5℃ ~ +70℃

- Humidity---Operating: 5% ~ 90%

- Dimension---94*71*26 mm

5. Packing list

- HDMI transmitter---1 pcs

- HDMI receiver---1 pcs

- USB-B Cable---1 pcs

- Power adapter---1 pcs

- User manual---1 pcs

Last but not least, if the signal loss or unstable, it may be caused by Ethernet cable compatibility, please adjust the 30M/50M switch on the receiver (RX) according to the length of the Ethernet cable. More questions? Please visit our store and click "Ask a question".

• TRANSMIT AUDIO/VIDEO LOSSLESSLY : Send HDMI signal to remote monitor as smooth as direct connection. Support 1080P@60Hz FHD, compliant with HDMI 1.3.
• HDMI OVER ETHERNET : Transmit up to 50m/164ft by Cat6/7 cable, 40m/130ft by Cat5e cable. For better audio&video quality and longer transmission distance, we recommend Cat6 or Cat7.
• USB&KVM: Easily control the signal source with keyboard and mouse, very suitable for computers, systems, etc.
• SIMPLER SETUP - Just connect a power adapter to the transmitter and it will start the device.
• Compatible With Most Operating Systems - Windows 2000/XP/Vista/7/8/8.1/10, Mac OS 9.1 & Higher, Linux 2.4 or Above.

User questions & answers

Question:	Do these units work on routers
Answer:	No, it is designed for car only. A 12-month warranty is included to ensure you have a worry-free experience. Please feel free to contact us if you need anything.
Question:	Does it lag when it is working
Answer:	You get exactly what is in the picture
Question:	Is there any limitation on its working voltage
Answer:	The dimension is 1 x 3 x 7.5 inches. For any further concern, we would request you to send us an email at [email protected] or can call us on 800-383-7323.

• 【2-Port DVI KVM Switch with Audio】One set of USB keyboard, mouse and monitor controls 2 DVI-interface computers. With audio, Microphone, cables and with wire remote push button switch.
• 【Easy to Use】 Kinan's 2-Port USB DVI Cable KVM switch is entirely plug-n-play solutions with no software to run, easily switch between two computers by hotkey or external switch button.
• 【Multiplatform support】This DVI KVM switch compatible operating system is Windows2000/XP/Vista，Linux，Mac and Sun.
• 【Superior video quality】Support Up to 1920x1200@60Hz resolution, compatible with 720P, 480P ,Support DDC and Automatic Identification high quality output.
• 【Hot pluggable& USB Power】Add or remove computers without having to power down the switch. No power required; this device is powered by the computer’s USB port.

User questions & answers

Question:	Does this product support keyboard and mouse dongle like Logitech unify or other ones
Answer:	The only ones that do anything (that I can tell) are the ones labeled 1/A, 2/B, 3/C, and 4/D (to select which computer is active). The rest don't make a beep or seem to do anything. No manual that I could tell. Also, it will come WITHOUT a battery for the remote, AND without telling you what kind of battery! It's a CR2025. I happily had some laying around.

Product description

Tripp Lite's 8-Port NetCommander Cat5 IP Console KVM switch is the optimal solution for controlling multiple computers from either a 19" LCD display console or a remote location. Simultaneous support is provided for up to one local and one remote user, allowing each to access a different port on the KVM at the same time. A single unit occupies a mere 1U of rack space, yet can control up to 8 directly connected computers. Each computer/server can be located up to 100 ft. from the KVM switch using Cat5e/6 cabling, with support for video resolutions up to 1366 x 768.

A full-screen graphical OSD with multi-level authentication (Administrator and User) allows you to quickly and efficiently manage your installation. Allows for remote authentication via RADIUS and LDAP/S, and supports both IPv4 and IPv6. The OSD includes a range of settings for system configuration that allow you to add accounts, customize account access, install a SSL certificate, backup and restore system settings, upgrade firmware, and more.

Accessing the connected computers is a breeze; a wide range of video and mouse sync settings ensure optimal remote session performance in any situation. In addition to ports for computers/servers, two serial ports are provided for the connection and control of serial manageable devices such as PDU's, firewalls, and routers. IP PDU's can be added as devices to be controlled by the KVM, and individual KVM ports can be assigned to a PDU port, giving you the ability to Power Cycle or Power Off/On the computer/server connected to that port. Additionally, Virtual Media allows an .iso file located in a Shared folder of a SAMBA or NFS server to be mounted to a Target Server and accessed as if it were directly stored on it. Virtual Media data transfer rates up to 12Mbps (B078-101-USB2 required) are supported. A B078-101-USB-1 can be used to provide Virtual Media support, but only at speeds up to 1Mbps.

• Combines 8-port KVM switch, 19” LCD screen, keyboard and touchpad in a single 1U rack-mountable drawer
• Control computers/servers locally or via LAN, WAN or Internet; Simultaneous support for 2 users – 1 local, 1 remote
• Cat5e/6/6a cabling lets you locate servers up to 100 ft. from the switch
• Use a plug-and-play Server Interface Unit, B078-101-USB-1(for USB) with each server that will be connected with Cat5 cable
• 1-Year Limited Warranty & TAA-Compliant. Mounts into 19”-wide rack, 27”-42” deep; can be mounted in 2-post rack with Tripp Lite’s B019-000

User questions & answers

Question:	Includes cables
Answer:	Should work for either sex. Being use for both sexes, no complaints. we are using the large size and they works well for stopping messes.

Product features

The Optimal All-in-One Network Management Solution for Critical Systems

Tripp Lite's B070-008-19-IP 8-Port, 1+1 User Rackmount Console Cat5 IP KVM Switch is the smart solution for controlling multiple computers and servers in IT applications. It combines a keyboard, touchpad, 19-inch color LCD and 8-Port KVM switch in a 1U rack drawer for compact storage and easy access without compromising control over connected servers. The B070-008-19-IP gives two users (1 local, 1 remote) simultaneous control of up to 8 servers/computers directly. It is compatible with both PS/2 and USB computers using inexpensive Cat5e/6 patch cables (sold separately). Built-in IP access capability enables servers/computers to be controlled from any location via LAN, WAN or Internet.

Supports Multiple Platforms, Flexible Network Management and IP Remote Access

The B070-008-19-IP supports both PS/2 and USB connections using inexpensive, readily available Cat5e/6 patch cables. Connected computers/servers can be located up to 100 feet from the switch. Because compatibility is based on common hardware standards rather than system software dependencies, almost any platform can be accommodated. Connect multiple versions of multiple platforms in any combination, including Windows and Linux operating systems.

The B070-008-19-IP is designed to ease multi-server management in data centers, server rooms and other high-density environments. BIOS-level access allows network administrators to solve complex problems efficiently and restore service before downtime affects productivity. An advanced on screen display (OSD) with high-resolution VGA video (up to 1366 x 768) provides a graphical user interface with management tools, including custom port labeling, auto-scanning and panel array mode. Users may also select a connected computer using on-console pushbuttons or keyboard hotkey commands. 2 LEDs per KVM port indicate when a computer is connected to a KVM port and powered on and when a computer is selected.

The B070-008-19-IP provides secure IP remote access to connected servers/computers without requiring additional rack space. IP remote access enables system administration, BIOS-level troubleshooting, GUI application installations, equipment reboots and more to be accomplished from any location using a standard Web browser or multi-platform client software.

Remotely Control PDUs, Secure Connection and Backed by One-Year Warranty

The B070-008-19-IP also works with IP remote access to control power distribution units (PDUs). For better power management, users can assign individual ports on the KVM to a PDU port to power cycle or power off/on the computer/server connected to that port.

The B070-008-19-IP offers 2 levels of password protection (administrator/user) to prevent unauthorized persons from gaining access to connected servers/computers. IP remote access is further protected with security features, including password protection, advanced 128-bit SSL and HTTPS encryption, bandwidth-optimized video and detailed activity logging.

The B070-008-19-IP comes backed by a one-year warranty.

Why Choose Tripp Lite?

Founded in 1922 in Chicago, Illinois, Tripp Lite is a leading manufacturer of products to power, connect and protect your equipment. With a large selection of connectivity products, Tripp Lite has everything from USB hubs and reversible USB cables to fiber-optic cables and over Cat5e/Cat6 signal extenders. Whether you need to connect high-speed networks to switches, routers and servers in your data center, or send high-resolution video signals to displays and digital signs, Tripp Lite has the complete solution. Plus, before and after your purchase, our Chicago-based, in-house technical support specialists are available to assist you by phone, email and live chat. With over 90 years of quality products and service, Tripp Lite is a brand you can trust.

• ♛Kvm Switch Dual Monitor HDMI+VGA 2 Port- The vga+hdmi dual monitor kvm requires each computer need two video output ports to connect and need dual video cards to get proper function; if some of laptop only support single-video cards,It CAN NOT get dual display proper function ,Please be aware of this before purchasing.
• ♛Plug and Play & No Driver Needed-Suitable for computers with 2 Port VGA+HDMI outputs interface port and support 2 screen or Multi-screen functions(It not support independent display+centralized display mode Low version laptop /computer)；If the computer only supports single-screen display , even if there are many output port, this product cannot help you get dual display function, Please be aware of this before purchasing.
• ♛Three Display Mode- In the premise that the computer Support Dual screen or multi-screen display function,computer's extended mode can output two different screens, and the copy mode can output two identical screens. VGA monitor resolution 1080 down compatible,HDMI monitor resolution 4k@30Hz down compatible
• ♛Ir Remote control dual monitor kvm switch -You can choose fast and convenient Ir Remote switch,You also can switch the two signal sources by the panel buttons, the status light tells you which port is active;Auto scan switch with adjustable interval (8-999 second)
• ♛Please Note-When using the dual monitor kvm at frist time or replacing a new display,The this kvm dual monitor should be initialized to match new monitor resolution ;Include all cables except cable for monitor ,Both VGAand HDMI+USB need connected with same a computer; Most importantly, if you have any questions about the product, you can contact us directly any time

User questions & answers

Question:	Will this support 1440p at 144Hz
Answer:	Yes, it still protects the screen. I’ve actually saw by toddler throw her Ipad down a couple of time’s and the screen didn’t crack.
Question:	Are there hot keys to switch between computers
Answer:	It is a one time fee for a 4yr warranty.
Question:	Does this kvm support apple hardware and macos without frame buffer problems
Answer:	Square Trade warranty runs concurrently with manufacturer's warranty.
Question:	Where are the mouse and keyboard outputs? Not shown in the pictures
Answer:	Page 1 paragraph 9, explains the coverage plan on what you’re asking it’s called ADH That stands for accidental handling.

Product features

Installation Diagram (Make sure all cable connection is correct for each input device)

When first time to use the dual monitor KVM switch, or whenever the monitor changed，Please must be need Initialize the virtual monitor

Press the number 1 button on the front panel and hold on for over 8-10 seconds Till all the LED’s on,

After the monitor information transmission finished, the KVM will switch to the current port.

Two “beep” sounds confirm the function

Wide Compatible & Plug and Play

1. Recommend computer support dual signal output of independent display card ( It not support independent display+centralized display mode computer )
2. Suitable for computers with dual HDMI or HDMI+DVI/VGA/DP outputs and

KVM Switch 2 Port Dual Monitor with EDID & HDCP

1. HDMI monitor compatible 3840x2160@30Hz, 1080P, 1080P 3D, 1080I, 720P, 576P, 576I, 480P, 480I
2. VGA monitor max resolution 2048*1536@60HZ, compatible downgrade resolution.

Ir Remote control VGA+HDMI kvm switch

1. You can choose fast and convenient Ir Remote switch,
2. You also can switch the two signal sources by the panel buttons, the status light tells you which port is active;
3. Auto scan switch with adjustable interval (8-999 second)

FQA :

Q1:Why cannot get it to recognize one computer or the monitor no display?

A1:a.please press the number 1 button on the front panel for over 8-10 seconds, the two LEDs on the KVM switch will be on, then off, then on again over 3 seconds, until the virtual monitor set is finished, and only one LED will be on. The virtual monitor is now refreshed, set, and restored.

b.Or If you connect the laptop,you can try to press"windows +P" simultaneously to copy the screen or extend the screen.

Q2:The mouse and keyboard or some other USB device does not work normally ?

A2: a.Wait 1-5 seconds for the operating system torecognize the device ;b.Switch to another PC,then switch back;c.Re-plug the mouse and keyboard once;d.Re-plud the KVM Switch.

Q3:Experiencing delayed and intermittent response time with mouse and keyboard ?

A3:Basic keyboard/mouse is recommended.The mechanical and gaming keyboards need more powerful, the switch will have insufficient power.

Product description

The Vertiv Avocent Autoview 3000 (AV3000) KVM over IP Switches provide local and remote management and control of up to 16 servers from a single console. Supporting up to two local users and one remote user, this series of rackmount KVM switches is flexible, secure and easy to use. The Vertiv Avocent AV3000 KVM over IP Switches deliver enterprise-class performance at a small business price. The series features virtual media for enabling out-of-band file transfers and OS patch deployments, as well as support for two-factor authentication using smart cards or Common Access Cards (CAC) readers. Session sharing allows for diagnostic or multi-user viewing from anywhere in the world. These solutions also include local USB peripheral support, support LDAP user authentication, and AES encryption.

• Provides integrated local or remote KVM over IP management capability - right out of the box
• Share a directly connected USB storage device to all servers connected to a KVM switch
• VGA: YesCAC/Smart Card Support enhances security for secure login (AVRIQ-VMC required for CAC support)
• Fast and easy upgrades to firmware switches and service interface modules.
• Compatible with Avocent DSView 4 Management for a centralized and secure management of IT assets.

• [Two PC shared with one set Keyboard and Mouse] Save your Room and Office Space, makes your mordern life much smart,simple
• [4K HDMI KVM Switch with USB2.0 port] Supports Connecting your usb 2.0 port device such as Scanner/USB driver/3D Printer/Monitor Camera
• [4K HDMI KVM Switch output stable picture]SUPERIOR VIDEO QUALITY. 3840x2160 @ 60hz with 4K source and capable monitor. EDID emulation to maintain resolutions and icons when switching
• [4K HDMI KVM Switch with remote control] Save your time and switch different PCs easily
• [4K HDMI KVM Switch is easy to operate and install]EASILY SWITCH INPUTS. Keyboard hotkeys, mouse gestures, push button, or remote control (CR2025 battery not included)

User questions & answers

Question:	Does the device emulate keyboard, mouse and display for the attached computers or does it see them "disconnect" when switching inputs
Answer:	No, there is only one HMDI-out and all HDMI is point-to-point connection so you cannot split one HDMI-out to 2 different monitors (i.e. "extend the display").
Question:	What type of battery does the remote need
Answer:	Same device except B1U has "ears" so that it can be mounted to a desk. Sor just a different form factor.
Question:	Does this device support dual monitor setup
Answer:	Hello, Our product is support 3840x2160@30Hz and 4 usb 2.0 port, come with 2 HDMI cbales and 2 USB cables, no need power adapter. If any further questions please contact us again, the service center is ready for you Best regards
Question:	What is the differences between the 2x1 a1u-black 4k@60hz and the b1u
Answer:	Hello, This product is not support hotkey switching, but you can use the button switch. It have 4 USB 2.0 port for faster response and can compatible more USB devices than usb 1.1. But the other KVM products in our store are support hotkey switching. If any further questions please contact us again, the service center is ready for you Best regards

Product features

TESmart 2 Port HDMI KVM Switcher – 4K 60Hz UHD - Audio Output and USB Sharing – 2x1

Ideal choice in the office and at home

Over time, there are more and more PCs/laptops and USB devices in the office and at home. Frequent connection between devices and PCs is very complicated and damages the connections. That's why sometimes you need a USB switch.

Overtake the many outlets for other similar products

Extremely durable: Full aluminum alloy case; Protects the interior and keeps the unit cool by helping to absorb and dissipate heat quickly.

System Requirements: Support for Unix / Windows / Windows / Debian / Ubuntu / Ubuntu / Fedora / Mac OS X / Raspbian / Ubuntu for Raspberry Pi and other Linux-based systems and more.

Note:

For the safety request by some express company，the remote control is not equipped battery by default. Please install the button battery CR2025 before using it.

Compatibility Information:

Dedicated keyboard/mouse ports have EDID emulation to achieve hotkey and gesture switching.

Basic keyboard/mouse is recommended for these dedicated ports.

If your devices are not recognized or do not fully work in the dedicated ports, use the USB port to achieve full functionality.

Multimedia keys will only work with the USB port.

Please note that the USB port does not support hotkey and gesture switching and a powered USB hub is recommended to expand USB connectivity.

If Could Not Get the Sound from L/R

1. What output interface is the computer equipped with? (DVI? HDMI?) If your computer is equipped with DVI output.

Normally that the DVI output does not carry audio signals, so the audio signal cannot be output to the speaker.

2. If the computer is an HDMI output, please follow the steps to set it up.

（Take Windows7 based as an example）

first of all, right-click the icon of "small speaker" in the bottom right corner of the desktop,

pop up the menu bar,and click "playback device (P)",At this time, we entered the sound control panel, and then select your (HDMI) monitor as the default output to solve the sound issue

If it doesn't display the monitor that is connected to the KVM switch,please Right-click in the blank to check if there is an option about"Show disabled devices".Maybe HDMI audio option was disabled

If you still can't find the options related to the monitor, please update your graphics driver and REBOOT your PC.

L/R Analog Audio Output

Extra audio output

Between PCs, it gets audio from HDMI, this has saved you from having to run additional audio cables on each PC

Remote control IR

Switching by infrared remote control (Battery model: CR2025)

About Used HDMI cable Length

• 1080P Resolution:Input within 33ft(10M) ,Output within65ft (20M)
• 4K@30Hz Resolution:Input within 16ft(5 M) ,Output within 33ft(10 M)
• 4K@60Hz Resolution: Input within 10ft(3 M) ,Output within 16ft(5 M)

What Is the Keyboard Commands to Switch Computers on a Mac Keyboard with No Scroll Lock Key?

Keep pressing "Selection" button in front of the KVM about 10 seconds until you heard a long beeping noise, release the button, turn off the power of the KVM and on again, the hotkey will be changed to from "Scroll lock" to "Right control" key

KVM Switcher with USB port

About the keyboard and mouse input Lag

The lag is because of the keyboard and mouse emulation, the emulation only provide 1000dpi sample rate. There is another option is don’t plug mouse to the emulation port, but to the USB2.0 hub port of the KVM instead, it is the same as you plug to computer directly.

Product description

Features:

Support infrared remote control switching, hotkey switching and remote control button switching. Support U disk read and write, can play video stored in U disk. Support LED switching channel indication, saving cost and improving work efficiency. This product is made of high quality ABS material, strong and durable. Supports most mouse and keyboard on the market, suitable for Windows/iOS/MAC/Linux/Netware/Unix/Android system.



Specification:

Material: ABS

Input Port: HDMI, USB-A

Output Port: HDMI

Control Port: USB-A

Read&Write Port: USB-A

USB Port Version: USB 2.0

HDMI Version: HDMI2.0

Maximum Support Resolution: 4K/60Hz

Power: 1W

Working Temperature: 15 to +55℃



Package List:

1 x KVM Switch

1 x Instructions

• Support infrared remote control switching, hotkey switching and remote control button switching.
• Support U disk read and write, can play video stored in U disk.
• Support LED switching channel indication, saving cost and improving work efficiency.
• This product is made of high quality ABS material, strong and durable.
• Supports most mouse and keyboard on the market, suitable for Windows/iOS/MAC/Linux/Netware/Unix/Android system.