7 best cooler master computer cases

Product description

The N is a member of Cooler Master all-new N series Computer cases. All members of the N series feature a mesh front panel that provides modern styling and optimized ventilation. Water cooling is fully embraced as N can support a 240mm radiator in the front for extreme cooling performance. A removable dust filter located under the chassis makes system maintenance simple and convenient.

• Edgy, asymmetrical design with full mesh front panel
• Mini tower with great expandability that supports up to three 3.5" HDDs and four 2.5" SSDs
• Supports a 240mm liquid CPU water cooling kit in the front of the case
• Supports high-end graphics cards with a length of up to 355mm (14 inches)
• Supports CPU air coolers with heights up to 160mm (6.3 inches)
• Supports SuperSpeed USB 3.0
• Removable dust filter under the power supply mount area for easy maintenance

User questions & answers

Question:	Which end is ground on power & reset switch cables, is it the side with arrow mark or side without the arrow mark
Answer:	Arrow mark on the cables from the front of the case is always positive.
Question:	what can you put under the dvd drive
Answer:	I'm pretty sure it's a typical 5.25" bay so you should be able to put fan controllers or anything else you could fit in a typical bay of that size. If you meant what's underneath the internals, then there is a stack of 3.25" bays for your hard drive so those are the only things really going there.
Question:	can this case fit the hyper evo
Answer:	Yes, it supports coolers up to 160mm tall. The 212 evo is 159mm tall.
Question:	Does this case require a matx power supply, or will a normal atx power supply fit
Answer:	The NR600 case is but a horrendous abomination if you are talking about place where you put PSU. The smaller PSU, the more chances you will have less problems. I have EVGA 650W, and it was mission impossible to make the module cables go into the PSU.

Product features

N200

The N200 is the latest addition to Cooler Masters brand new N Series - compact mainstream cases with extensive water cooling support and improved air cooling performance wrapped in subtle and simplistic designs. The N200 not only supports 120mm radiators at the back, but is the first mini tower that supports installing 120mm or even 240mm radiators in the front of the case!

Product description

The Cooler Master HAF XB EVO takes the famous high Air Flow Series to a revolutionary new form factor with extreme cooling performance. The removable horizontal motherboard tray and large mesh top and front panels with two 120mm trifle front fans create a powerful front to back airflow. There is plenty of space for even the tallest high Performance tower heat sinks, thick liquid cooling radiators and up to 3 of the high-end graphics cards. A case quickly and easily transforms into a test Bench. C ideal for enthusiasts and over clockers. Two durable trifle fans included in the front (also supports a 240mm radiator) for powerful airflow. Supports a tower CPU coolers up to 180mm tall and high-end VGA up to 334mm long. Supports up to 4 HDD or SSDs by removable HDD cages. Motherboard tray can be removed to install, remove or swap components. Dual USB 3. 0 Super Speed ports and X-Dock slots in the front for Lightning fast plug-n-play I/O. Rigid carry handles on the side panels.

• A case quickly and easily transforms into a test bench ideal for enthusiasts and over clockers
• Two durable trifle fans included in the front (also supports a 240 millimeter radiator) for powerful airflow
• Supports a tower CPU coolers up to 180 millimeter tall and high end VGA up to 334 millimeter long
• Supports up to 4 HDDs or SSDs by removable HDD cages
• Motherboard tray can be removed to install, remove or swap components
• Dual USB 3.0 SuperSpeed ports and X dock slots in the front for Lightning fast plug n play I/O
• Rigid carry handles on the side panels

User questions & answers

Question:	Does this come with a power supply? If not, what would be recommended
Answer:	Does not come with a power supply, but it's very flexible. Just make sure if you get an ATX motherboard that you get an ATX power supply (or micro, mini power supply). I'm using a non-modular that will require a lot of cable hiding, but there's plenty of space to hide cables out of the way.
Question:	Can someone give me the exact specs to this case like width length and hight and also how much room is there for a CPU cooler
Answer:	Everything you request is listed in the manufacturer's info above for the Cooler Master Cosmos II, but some of it conflicts with these answers. For example, CPU cooler height is shown as 190mm/7.48" (not 6.5mm/2.5"), which is more consistent with the large size/width of the case itself. It seems like these comments are not all about this case, so I suggest anyone considering it do his/her own research.
Question:	To anyone who built in this case, and installed a non modular psu, how was it? I was thinking about buying a non modular sfx
Answer:	I did. A PC&Power Cooling 1KW SR PSU that's about 12-15 years old and still going strong. The unused cables, just folded each cable and zip ties them and tucked them behind it. The PSU is huge too. It almost reaches the bottom HDD cages. Another benefit of this case as it won't fit in a lot of cases.
Question:	Can this support three(3) red LED 80 mm fans? thanks
Answer:	I believe it will only support two 80mm in the lower rear section of the case. The other rear fan on the upper section is a 120mm fan, as are the front two (or four if you double up with a radiator.) There is also a 240mm fan mounting on the top.

Product features

HAF XB EVO

The Cooler Master HAF XB EVO takes the famous High Air Flow series to a revolutionary new form factor with extreme cooling performance. The removable horizontal motherboard tray and large mesh top and front panels with two 120mm XtraFlo front fans create a powerful front to back airflow. There is plenty of space for even the tallest high performance tower heatsinks, thick liquid cooling radiators and up to 3 of the high-end graphics cards.

Product description

The E-ATX MasterBox TD500 Mesh takes airflow performance and turns it into an art form. Powered by three pre-installed ARGB fans, airflow is fed through a geometric, three-dimensional mesh front panel into a system viewed from a crystal-clear tempered glass side panel. The Crystalline Tempered Glass side panel is precision engineered for both its toughness and its aesthetics through CNC machining. Polygonal Mesh takes its form from Cooler Masters Fine Mesh technology, simultaneously providing high airflow, dust filtration, and a strengthened structure. With advanced technology set firmly into fine art, the MasterBox TD500 Mesh Black carves its own path to the bleeding edge.

• Polygonal Mesh features a 3-dimensional contour and is also capable of simultaneously providing high airflow and dust filtration.
• A crystalline tempered glass side panel dons a crystalline design, precision engineered for strength as well as aesthetics
• Three included addressable RGB fans flood the build with lighting while providing considerable airflow.
• For enthusiast-grade cooling, 2 360 millimeter radiators are supported on the top and front panel to keep the most extreme systems cool.
• Support for up to 7 120 millimeter fans and front, top, and rear liquid cooling ensure the utmost in performance.

User questions & answers

Question:	Is the PSU bay removable
Answer:	Yes it will indicate it’s full and needs to be dumped out
Question:	Does this have dust filters on front and top pane
Answer:	I guess you could
Question:	What is the max size of cpu water/liquid cooler can this case fit in
Answer:	Yes it stops running and light blinks indicating time to empty the water bin.
Question:	Does the power supply shroud have mounts to put any intake fans to blow on the gpu
Answer:	Mine just pulls out

Product features

Cooler Master MasterBox TD500 Mesh

The MasterBox TD500 Mesh E-ATX PC chassis turns high airflow performance into an art form with a geometric, three-dimensional mesh front panel and a tempered glass side panel plausibly cut from crystal ore. Raw performance is powered by three pre-installed ARGB fans mounted in front to light up every intricate angle of its structure.

Polygonal-Mesh

Crafted from Cooler Master’s Fine Mesh technology, Polygonal Mesh features a three-dimensional contour and is also capable of simultaneously providing high airflow and dust filtration.

Crystalline Tempered Glass

A crystalline design spans the edges of the tempered glass side panel, precision-engineered for strength as well as aesthetics.

Triple ARGB Fans

Three addressable RGB fans flood the Polygonal Mesh front panel with lighting while providing considerable airflow to the system.

Versatile Cooling Options

Open Airflow design, Fine Mesh front and top panel supporting up to seven 120mm fans and 360mm radiator.

Roomy Interior

The spacious interior fits all standard ATX and Micro-ATX motherboards configuration. Support for up to a 410mm graphics card, a 165mm CPU cooler, and up to a 180mm PSU in length provides room for upgrades.

Product description

The Master Box Q300L is your straightforward option in the lineup of the brand new Master Box Series from Cooler Master. A Series that might be small in size but excels in functionality and modularity without compromising on the thermal performance. Although the size wouldn't tell, the Master Box Q300L supports a standard ATX PSU which we don't see often in the market with this size. Based on the different system setup, the I/O panel can be adjusted to six different locations, three options at each side of the case. You can decide which setup fits your system best. Due to the cube design of the frame and special pattern design on the magnetic dust filter will make the chassis stand out from the rest. The combination of a practical design and the unique customizable outlook makes the Master Box Q300L The perfect choice for office and home.

• I/O panel can be adjusted in 6 different locations and the Case can be positioned: Vertical or horizontal
• Edge to edge acrylic transparent side panel offers a full view inside
• Body depth height: Can support normal size ATX power supply
• Front magnetic design dust filter with open perforated front, top and bottom for high air performance
• Extra space behind the motherboard tray for hidden cable management

User questions & answers

Question:	Will the asus geforce gtx 1060 3gb dual-fan oc fit in this case
Answer:	According to the Asus website, the dimensions for that card are 24.2 x 13 x4.3 Centimeter I'm currently using a Zotac 1060 6GB AMP! Edition, whose dimensions are 210mm x 121.8mm x 37mm The ASUS card is about an Inch longer, but there is WAY more than enough room in the case to fit the ASUS card.
Question:	can it fit a normal ATX power supply
Answer:	Absolutely will fit any ATX power supply. I'm using thermaltake smart series 500w rgb.
Question:	I've seen photos of the handle (from a Q300P) being attached to the center of the top panel of this case. Is this possible
Answer:	You can remove the plastic bit that has the cooler master logo on it and install handles on the case like the Q300P
Question:	Is this case wide enough to support a cooler master hyper 212 evo
Answer:	I know what the official CM specs are, but I think it will fit. This guy installed a taller cooler with its cover and it fit. https://www.vortez.net/articles_pages/cooler_master_masterbox_q300l_review,8.html

Product features

MasterBox Q300L

The MasterBox Q300L is your straightforward option in the MasterBox Q-series from Cooler Master, a series that might be small in size but excels in functionality, modularity, and thermal performance. The combination of a practical design and the unique customizable aesthetic makes the Q300L the perfect choice for office and home use.

System Flexibility

6-orientation I/O panel—both sides: front, top, and bottom.

Edge-to-Edge Acrylic Side Panel

Show off your build through the full-size transparent side panel.

Clean Routing Space

28 mm of open space for hidden cable management.

Small Form Factor, ATX PSU Support

Despite the Micro-ATX form factor and the body depth/height of only 370 x 370 mm, the Q300L can accommodate a normal ATX PSU.

Product description

Two front panels, two 200mm ARGB fans, and a handle to grip onto when the adrenaline kicks in. The MasterCase H500 is established as the go-to ATX PC chassis for high performance airflow. Now, with 200mm ARGB fans, its legacy is upgraded with premium lighting. Each choice of front panels decide whether the build will excel at ruthless airflow performance or head-turning aesthetics. Of course, the mesh is the ideal choice for providing the pre-installed fans with high volumes of fresh air. The transparent panel, on the other hand, parades those fans in crystal clear view. With the included accessories, substantial ventilation, and iconic H-Series design elements, the MasterCase H500 retains all of the advantages of the original while adding ARGB fans for good measure.

• Mesh and transparent front panel – Both the mesh and transparent front panel are included for maximized airflow and offering a crystal-clear view of the fans
• Dual 200 millimeter ARGB fans – The iconic, addressable RGB fans are the core of the H-series in design and function, capable of operating quietly while moving high volumes of air due to their size
• ARGB lighting system – The pre-installed ARGB fans can be managed by either the motherboard or an included controller, connected by the included splitter, to create a comprehensive ARGB lighting system
• Tempered glass side panel – Gaming hardware, custom-loop cooling, and the pure pride of the builder is shown in panoramic view through an edge-to-edge tempered glass side panel
• Optimized airflow – Filtered ventilation on the top panel provides additional thermal support while also offering mounting options for future cooling upgrades

User questions & answers

Question:	Does the power button click when you push it regardless of power
Answer:	HE Smart on iPhone
Question:	can you turn the fan lights off
Answer:	Top
Question:	Is there place for a top fan
Answer:	I had to get my own drain custom fitted. I don't feel this unit does a very good job. I would not buy again, or recommend. I called to get things addressed and they didn't act like they knew what unit I had.
Question:	How loud are the 200mm front fans
Answer:	The label on the dehumidifier says “Made in China.”

Product features

MasterCase H500 ARGB

Both the mesh front panel and transparent panel are included with the MasterCase H500 ARGB to offer a choice between maximum airflow and aesthetics. Each of the front panel options compliment the industrial design of the MasterCase H500 ARGB in their own method.

Two 200mm ARGB fans come pre-installed with an included ARGB controller And splitter. The lighting system can also be controlled by the reset switch to cycle through color and mode.

Mesh & Transparent Front Panel

Both the transparent and mesh front panels are included for maximized airflow and offering a crystal-clear view of the fans.

Dual 200mm ARGB Fans

The iconic 200mm ARGB fans capable of operating quietly while moving high volumes of air due to their size.

Optimized Airflow

Filtered ventilation on the top panel provides additional thermal support while also offering mounting options for future cooling upgrades.

ARGB Lighting System

The pre-installed ARGB fans can be managed by either the motherboard or the included controller and splitter, to create a comprehensive

ARGB lighting system.

Tempered Glass Side Panel

Gaming hardware, custom-loop cooling, and the pure pride of the builder is shown in a panoramic view through an edge-to-edge tempered glass side panel.

Hidden Handle

A built-in handle is implemented on the top panel for easier transport to gaming events or for LAN parties.

Product description

The MasterBox MB311L ARGB is a Micro-ATX airflow PC case pre-installed with two ARGB fans and made to be built with the latest gaming hardware. The front panel’s façade is made entirely of Fine Mesh, placed between two honeycomb vents on either side to maximize airflow. Since running the latest games, smoothly, means keeping the latest hardware efficiently cooled, top panel ventilation offers the option to add even more cooling hardware—if nothing is mounted, the top panel acts as passive ventilation. The internal layout was engineered for a high compatibility for the latest gaming hardware while also accounting for future upgrades. Following in the principles of the award-winning MB Series, versatility is paired with presentation to ensure that any gaming system built inside the MasterBox MB311L ARGB looks as good as it performs. I/O Panel - 2x USB 3.2 Gen 1 (formerly USB 3.0), 1x 3.5mm Audio Jack, 1x 3.5mm Mic Jack, 1x ARGB 2-to-3 splitter, 1x ARGB Controller (only for the S02 versions).

• Fine mesh front panel: Cooler Master’s Fine Mesh design on the front panel is proven to provide proficient airflow while filtering out dust.
• Mesh intakes: Large, mesh intakes span each side of the front panel to provide additional airflow to system.
• Dual ARGB fans: Dual pre-installed 120mm ARGB fans with splitter can be managed by the motherboard, to create a customized ARGB lighting system. Motherboard support - Micro ATX, Mini ITX
• Tempered glass: Hardware, custom-loop cooling, or the pure pride of showing off the build in panoramic view through an edge-to-edge tempered glass side panel.
• Adaptable drive cage: The drive cage is movable, able to shift toward the front to accommodate for PSU space, backwards to provide additional radiator space, or even completely removed.
• Versatile cooling options: Support a total of 6 120 millimeter fans, front, top and rear radiator placement to ensure no compromise on cooling performance.

User questions & answers

Question:	what does it come with in box
Answer:	HEN70ETFP
Question:	How do i control the rgb fans
Answer:	Yes
Question:	How to connect the argb fan to asus b450m-plus
Answer:	3/8th inch, inside diameter. Works well
Question:	Does it come with everything
Answer:	Yes it does come with the drain tube.

Product features

Cooler Master MasterBox MB311L ARGB

The MasterBox MB311L ARGB is a Micro-ATX airflow PC case with two ARGB fans and made to be built with the latest gaming hardware. The front panel’s façade is made entirely of Fine Mesh, placed between two honeycomb vents on either side to maximize airflow. Since running the latest games, smoothly, means keeping the latest hardware efficiently cooled, top panel ventilation offers the option to add even more cooling hardware—if nothing is mounted, the top panel acts as passive ventilation.

Mesh Front Intakes

Open Airflow design fine mesh, and a mesh intakes spanning each side of spanning the front panel.

Dual ARGB Fans

Dual 120mm ARGB fans with splitter can be managed by the motherboard, to create a customized ARGB lighting system.

Tempered Glass Side Panel

Hardware, custom-loop cooling, or the pure pride of showing off the build in panoramic view through an edge-to-edge tempered glass side panel.

Roomy Interior

The spacious interior fits all standard ITX and Micro-ATX motherboards configuration.

Optimized Airflow

Airflow is optimized by a collaboration between the front Fine Mesh and Mesh Intakes, with additional top panel ventilation, and rear exhaust.

Product description

The sleek and aggressive K500L is proof that your fix for the latest performance and looks doesn’t need to come at a great price.

With a partial mesh front panel, 400mm of graphics card space, support for six 120mm fans, and front and rear water cooling support, there’s nothing budget about the benchmarks you can reach.

And to keep everything clean and crispy, take advantage of generous cable routing clearance, full black coating, and a PSU cover.

Set Contains:

Coolermaster Case and Accessory

• Amazing Lighting Effects/ EXCELLENT THERMAL PERFORMANCE/ Versatile cooling options/ fits all standard motherboards
• ATX, Micro-ATX, Mini-ITX/ USB 3.0 x 2, Audio In/ Out
• Supports CPU-Coolers up to a height of 160mm, Graphic Cards up to a length of 400mm, and Power Supplies up to a length of 180mm

Product features

AMAZING LIGHTING EFFECTS

The pre-installed red LED Fans and red lighting make a sleek and aggressive feeling, Come to show off your gaming build with MasterBox K500L.

EXCELLENT THERMAL PERFORMANCE

Optimized airflow due to the semi-meshed front panel and ventilation holes on top of the case.

VERSATILE COOLING OPTIONS

The front supports up to three 120mm or two 140mm fans and up to a 280mm radiator. The Rear supports a 120mm fan or radiator.

The MasterBox K500L comes with two pre-installed 120mm LED fans in the front and a single 120mm fan in the rear.

MAIN COMPONENTS CLEARANCE

The MasterBox K500L supports CPU-Coolers up to a height of 160mm, Graphic Cards up to a length of 400mm, and Power Supplies up to a length of 180mm.

The spacious interior supports ATX, Micro-ATX, and Mini-ITX form factor motherboards.