7 best car video switchers

Product description

Brand: Qiilu

We are a professional store producing high-quality Automotive Accessories,all items come with strict quality control;

We care about every quality-related issue with a REPLACEMENT or REFUND;

Please contact us at the first time if you got the defective item,we will reach out to you to your within 24 hours.

Directly shipping and fast delivery; We have strong comfidence for our products; Provide friendly customer service, solve your questions in time



Specification:

Item Type: Video Switcher

Material: ABS



Features:

1. 4 Video Inputs: Lleft-view, right-view, rear-view and front-view, each group of video inputs has a camera + 12V.

2. The output shares a video channel and outputs a power line that triggers the screen.

3. It can detect the left and right turn of the car and switch to the corresponding video channel; when out of the reversing state, the video source is switched to display front view 7s (this function can be selected according to the situation), and then returns to the default video output off state. Color definition of the line: 12V power supply positive (red line), GND negative (black line), left turn signal (white line), right turn signal (green line) and reverse turn signal (blue line).

4. The product has designed a product power supply protection circuit and a camera power supply protection circuit to protect the camera and on-board circuits.

5. The product adopts wireless remote control.

6.Wide voltage power input 8-16V, 24V to 12V need to be equipped on large car

7. Remote control battery model: CR2025 (included)

Package List:

1 x Video Switcher

1 x Remote Control

1 x Instruction

• This switcher is designed to add more video inputs for cameras when it's connected with video interface for different car models.
• Four video outputs are shared with one video channel with the same power trigger line.
• When each camera receives power from the corresponding headlight, the display can show the correct video channel by turning on the left and right indicators or backup.
• The product itself has designed the product power and the camera supply protection circuit, carries on the protection to the camera and the vehicle circuit.
• Adopt wireless remote control, which has easier operation, convenient for using.

User questions & answers

Question:	What is the response time -- the time between applying 12v to the purple wire (for example) and when the picture shows up on the monitor
Answer:	ok, so there is a review on here that lays out adapters and what not for the typical setup. (male to male, etc) I don't think you will need a timer per say, but when I wired up my front and rear cam (front on toggle switch, rear off backup lights) I had to use diodes (also found on here) to splice the power into the radio signal input. the diodes allow basically one way power, so you do not feed back to the other source, or over load your input on the radio. the rest is simply finding power sources for the cameras, and wiring them in. I ignored the 'automatic' input, because I wanted mine to show backup whenever in reverse, even if my front camera was engaged. you might want to do the same, but testing before tucking your wires away is a great idea to make sure its all setup.
Question:	Can i use this switch to go between 2 reverse cameras? I have one on my bumper and am adding a wecond camera to my headache rack to help when backing
Answer:	In an existing setup, there is already a trigger to the receiver. Inserting this device does not change that. It adds the ability, once triggered, to switch the input to one or two other sources. In my case,. I took the existing trigger (reverse) and wired a 3 way on-off-on switch to enable camera view 2, 1, or 3, depending on whether I wanted front, back, or bed view. I then took a second, and wired 12v and reverse to the head unit reverse wire so I can turn on the camera, turn off the camera, or have it on when in reverse...
Question:	I want to inputs to for turn single and backup camera as i turn/backup. What do i need to make this happen? small digital timer - parts/list/help plz
Answer:	Yes. Once you connect to the Panda Wireless Express Router, you use a web browser to go into the management interface of the router and then change the password. Please send an email to [email protected] if you have any question about the Panda Wireless Express Router.
Question:	Is there a single trigger output that will cause the reciever to turn on the Video input? Otherwise, what tells the receiver to show the video
Answer:	If your Mac is connected to your Airport express and Panda Express router is connected to your Airport Express in the other room using Ethernet cable (not in WiFi Repeater mode), you can stream the music to your stereo via Panda Express router.

Product description

This high quality 2-way video Switcher includes a dedicated pass-through for one existing video source, and two additional selectable video inputs. The video inputs are triggered by a positive 12V Input.

• Video switcher
• Composite video RCA input
• Composite video RCA output
• Unique dedicated pass-through for existing video source
• Positive 12V input trigger

User questions & answers

Question:	Possible to switch between blind spot cameras and reverse camera with turn signal and back up trigger into oem system
Answer:	The input trigger switches the video inputs. The output trigger is activated when one of input trigger is triggered. The output trigger is connected to a monitor trigger display the video that comes from the VTSW4. In case of stereo with a camera input, it is connected to camera trigger input. Usually, the camera trigger input wire is purple color or purple with a white stripe.
Question:	Will this unit merge all 4 video together and display in single video
Answer:	Yes there are 4 trigger input wires to trigger each video input for display output.
Question:	I see the input trigger wires. Where is the trigger for the output video feed
Answer:	It is pretty quick. Mine runs a few cameras. Pop into reverse and its on the display.
Question:	Is there a trigger out for the video output
Answer:	Yes. A diode may assist with the radio trigger wire

Product description

Specification:

Condition: 100% Brand New

Item Type: Camera Converter

Material: Zinc Alloy

Color: As picture shown

Operating Voltage: 9-16V

Operating Current: <10mA

Operating Temperature: -10℃ - 70℃

Relative Humidity: ≤ 95%

Voltage Output: DC12V

Wiring Instructions:

Red Wire: ACC power positive pole.

Black Wire: ACC power negative pole, ground wire.

Blue Wire: Reverse light.Application:As long as the car with a display (such as for android navigation, rearview mirror display, and the factory's own screen needs to be decoded before use), and with a reverse camera, all can be used, the ordinary display only one reversing camera signal input, after installing the switcher can be an additional front camera signal input, it had no effect on the original screen.

Package List:

1 x Camera Converter 4 x Power Cable1 x Insruction

• Great and practical role: Widely used, suitable for vehicles with monitor and reversing camera, it has no impact to oringal monitor.
• Practical and useful: When the engine is started, the system activates the monitor and the front camera to check the front view for 8 seconds, then turn it off.When reversing, the system automatically activated rear view camera, and switches to the front view of the video camera in 15 seconds, then stops.
• Features: Push the control switch to enter the front mode, in this mode, the system will monitor and activate the front of the camera at all times. Exit the mode by pressing the control switch again.
• Easy to Install And Alternative Use: Simple installation, no complicated tools required.
• Purchase Notice : We value the shopping experiences and satisfaction of each customer, so we provide technical support. If the product install or quality have any problem, please contact us in time.We will solve it as soon as possible.

User questions & answers

Question:	If there is constant power will this function as essentially an A/B video switch to switch between 2 video sources without shutting off after 15 secs
Answer:	No, this unit only shows one input at a time.

Product description

Specification:

Material: Plastic & Metal

Color: Black

Package Size: 15 * 10 * 4cm / 5.91 * 3.94 * 1.57in

Package Weight: 132.1g / 4.66oz



Package List:

1 * Video Switcher

1 * Remote Controller

1 * User Manual

• This switcher is designed to add more video inputs for cameras when it's connected with video interface for different car models.
• Four video outputs share with one video channel with the same power trigger line.
• When each camera gets power supply from the corresponding car lamp, the display could show the correct video channel by turn on left and right indicator or back up.
• The product itself has designed the product power and the camera supply protection circuit, carries on the protection to the camera and the vehicle circuit.
• It adopts wireless remote control.

User questions & answers

Question:	Can this work with a car radio
Answer:	If no light on remote check battery or make sure the plastic piece they ship it with (so the battery stays disconnected in transit) has been pulled out
Question:	If all the video inputs have constant power will it function as a way to switch between video sources manually
Answer:	No it cannot.
Question:	Is there a remote pairing process? The remote will not switch cameras and the light does not flash on the unit when i press the remote
Answer:	Dear customer, This Car Front View Camera Switcher will essentially an A/B video switch to switch between 2 video sources without shutting off after 15 secs.
Question:	Can it display 2 cameras at the same time
Answer:	This switch has 4 triggers with 4in - 1out configuration. If you fed output into an OEM system - with two of inputs being a blind spot cameras, you can trigger either one to be displayed on your oem system.

• 🚗 【 Video output of Car Camera 4 Way Switch】 Two videos output, one for car monitor, the other for car DVR.Front view camera power: supplied by control box system.
• 🚗 【 Post-test 】 When the ACC power is turned on, the system will enter the self-test without the reverse trigger, so that the rear and front cameras are illuminated for two seconds in sequence, and finally enter the front view display. After 6 seconds, no other trigger will automatically turn off all the lights. camera. In the process of self-test, if there is a reverse trigger, the self-test will be automatically terminated and the corresponding trigger function will be displayed.
• 🚗 【 Rear view camera power of Car Camera Control Box 】Supplied by control box system, or could be supplied by reverse lamp power.Left / Right side view camera power: supplied by control box system.
• 🚗 【 Front and rear mode 】A. When the reverse gear is engaged, the display is displayed behind, leaving (without delay) the display for the first 6 seconds, and automatically closing after 6 seconds.           B. Press the button once, open the front view normally open mode, and then press the button to close the front view. Trigger priority order Press the button function to open the front view normally open mode, and then press the button to close the front view.
• 🚗 【 Switch function 】 Press for less than 1 second: Side View mode. Front View mode Press for 2seconds (in Front mode): Front View always working / Front View turn off.Cameras are not included. 1 year warranty.Please note it only display one interface,not four interface at the same time. It doesn't includes camera.If you want to make this function,you should have installed 3 360degree camera and 1 rearview camera.

User questions & answers

Question:	Theres no stereos that support left and right cameras they all have front and back camera inputs
Answer:	Hi friend, The camera output voltage is 9-14V,and the maxim current from each camera connection is 0.25mA. Please see the power supplied as following: Video output: Two videos output, one for car monitor, the other for car DVR. Front view camera power: supplied by control box system. Rear view camera power: supplied by control box system, or could be supplied by reverse lamp power. Left/Right side view camera power: supplied by control box system. Thank you. Best regards Favoritecardvd
Question:	can this supply enough current for 12 volt, 500 ma cameras
Answer:	Yes,friend,please make sure your stereo supports to see front,left and right camera. Thank you. Best regards Favoritecardvd
Question:	What is camera output voltage and max current from each camera connection? Thanks
Answer:	Yes, i have mine hooked up to a Jensen double din radio with 7 in. screen.
Question:	So can i use my back up camera input on my pioneer 4200 nex to plug this products yellow rca into my stereo says its only for a back up camera
Answer:	Yes exactly, i use 1cam on my truck and 3cams on my travel trailer ,and it works great

Product description

Features: - 4-Ch. Video Splitter Controller - Digital Picture Video Signal Switcher - Quad View Display, See All 4 Cameras On-Screen - Selectable Viewing Modes: 1 / 2 / 3 / 4 Cameras - Mirror Image Function for Backup Camera System Support - Real-Time Video Display Viewing - Simple & Hassle-Free Operation - Button Control Panel - RCA Type Video Inputs - Monitor / Display Screen RCA Type Video Output - Integrated Mounting Bracket Chassis - Compact Size for Universal Panel Installation - PAL/NTSC Auto Adapting - LED Indicator Lights - Used in Car, Bus, Truck, Trailer, Van & Mobile Vehicle Applications - For Backup Cameras, Cam Systems, Security Surveillance, CCTV, Panel Monitor Display Screens What’s In The Box: - 4-Ch Video Splitter - Remote Control - DC Power Cable Technical Specs: - Splitter Type: 4-Channel Video Switch - Connector Type: RCA Video - Video System: PAL/NTSC - Video Resolution (PAL/NTSC): 720x576 / 720×480 - Frame Rate (PAL/NTSC): 100FSP / 120 FPS - Video Frame Refreshing Rate: 30 FPS - Operation Temperature: Up to 140°F / 60°C - Power Voltage Input: DC 5V-12V - Remote Control Battery: x CR-2025 Button Cell, Included - Dimensions (L x W x H): 4. 92’’ x 1. 97’’ x 0. 79’’ - inches

• SUPPORT 4 CAMERAS: The Pyle vehicle video switcher allows multiple cameras to be connected and displayed onto a quad-channel monitor. Each camera can be displayed one by one onto the monitor when pressing the corresponding key mode
• SELECTABLE CAM VIEW MODES: The car video switcher features real-time video displaying viewing and mirror image function with selectable viewing modes for backup camera system support powered by PAL and NTSC video resolution of 720x576 / 720/480
• QUAD VIEW KEYS: The car video switcher allows you to view various pictures and can be displayed onto the monitor depends on the mode key. Each key will show you various picture mode and will be shown one by one, each press will change another mode
• UNIVERSAL DESIGN: The video multiplexer is designed for vehicles. Features a universal design making it compatible w/ vehicle types such as a car, truck, RV, SUV and more! It has a convenient video source control allowing you to view real-time display
• CONTROLLABLE VIDEO SPLITTER: Equipped w/ a button control panel & power led indicator. Features 5V -12V DC power supply, Up to 140°F / 60°C operation temperature & measures 4.92” L x 1.97” W x 0.79” H, the compact & mini size allows easy installation

User questions & answers

Question:	I have three cameras. Does this have the ablity to show one camera view on top and two on the sides.? Has to stay on this view everytime I start car
Answer:	Hi, you can connect all 4 cameras using video port. Short press the Quad Key on the remote control ( Manual page 2). You may check other details of the unit by visiting our website pyleaudio.com. Type the model number on the search box PLVSPLT41 for more details. Thank you.
Question:	How 4 camera can enable? If I need to connect side camera to blinker will it show that 1 video or have to connect all camera to 1 trigger
Answer:	Hi, yes but you have to use an adapter. Our PLVSPLT41 model is using RCA port while the PLCMTRS77 is using a 3 pin connector. You may check other details of the unit by visiting our website pyleaudio.com. Type the model number on the search box for more details. Thank you.
Question:	When connecting side view cameras,to the pulsating wire,do the video blink also
Answer:	There are aftermarket video switches that support left and right turn signals and can be routed into either camera input on the HU.
Question:	Is this compatible to the model Pyle Plcmtrs
Answer:	Hi friend, The unit can't supply power for cameras.The cameras has own power,and it's supplied by the rearview light or the ACC of the car. Thank you. Best regards Favoritecardvd

Product description

Would you like to add multiple cameras to your car, truck, SUV, UTV or side by side? but you only have space for 1 monitor? the Crimestopper vsmc-400 4 channel quad view switcher is the solution. It can display up to 4 images on any OEM or aftermarket monitor at the same time see what you need to see, when you need to see it with the Crimestopper vsmc-400

• Multi-camera capable
• Displays up to 4 images simultaneously on 1 monitor
• 4 video inputs, 1 video output

User questions & answers

Question:	Does this have selectable multi-camera views? The description suggests displaying 4 feeds simultaneously
Answer:	Yes
Question:	Will this work on 2007 tahoe factory radio
Answer:	mygig radio? not much sure, maybe you can try
Question:	Will this work on the new Eonon android 10 head unit
Answer:	No, not for boss
Question:	I have a mygig u-connect style touchscreen stock radio/dvd/cd in my 2013 challenger. will this work
Answer:	Hi, yes you can put view one camera on the top of the unit and the rest of the camera is playing on the bottom part. There is a button on the remote control for that. You may check other details of the unit by visiting our website pyleaudio.com. Type the model number on the search box PLVSPLT41 for more details. Thank you.
Question:	Will this work with a boss be7acp head unit in a 2012 ram
Answer:	Hi, you can connect all 4 cameras using video port. Short press the Quad Key on the remote control ( Manual page 2). You may check other details of the unit by visiting our website pyleaudio.com. Type the model number on the search box PLVSPLT41 for more details. Thank you.