13 best ar scope mounts

• Dual ring scope mount for mounting standard 1 inch tube rifle scopes
• Slim profile design offers the weight of lightweight scope rings with the added rigidity and convenience of a one piece mount
• Mounts to any flat top Picatinny rail equipped rifle
• 2 inches of forward extension allows extra flexibility for optimum eye relief and shooting position
• 5 ounces in weight and 5 inches in total length, with a base of 3 inches and 2.5 inches of spacing between the rings

User questions & answers

Question:	Work for m1a eye relief
Answer:	If you want to do a durability test to see how many times you can send a pellet down range before it refuses to hold zero, you can use it on a magnum air rifle. If it is a variable pump, non-magnum (Below 1000 FPS) inert gas, springer (any speed below 700 FPS) or a PCP air gun the answer will be yes. Otherwise if you do expect to use it on a spring piston(springer) or magnum speed rifle of any make the answer will be you can try but your durability will suffer. I have killed 4 scopes over the last 2 years putting them on my pellet rifles(Barksa, Centerpoint, Simmons and Gamo). Now I use magnum airgun rated scopes (Cabela's Brand the best so far and UTG/Leapers).
Question:	Will this fit on a chiappa m
Answer:	Yes, I put it on my 30+ year old Marlin model 60 with the included rings and it not only bolted right on, but I was on paper at 50 yards with the first shot group - only about 4" off target with no pre-sighting at all!
Question:	Would this mount be strong enough for use with a shotgun
Answer:	The rings that come with this scope will not securely attach to the dovetail on either a Marlin XT-22 or a Marlin 795. There is a lot of the scope creep. For the XT-22 I bought weaver scope bases, for the Marlin 795 I ended up buying a UTG air rifle base with integral rings. The scope is great, the rings that come with it are subpar though.
Question:	What is the height from top of rail to bottom of ring
Answer:	I have it mounted on my 10/22 takedown. Fits in the carrying case when mounted, but barely. Great scope for that rifle imo

Product description

Vortex Cantilever Ring Mount for 1-Inch Tube w/ 2in Offset, 1. 59in/40. 39mm, Black CM-102, Matte, 2" Offset (1. 59" / 40. 39mm)v 2. 5" Between Rings

• Included Components: Set Of Rings

User questions & answers

Question:	Will these work for my vortex crossfire ii 3-9x50 riflescope w/ v-brite reticle(.270 rem adl rifle) ty
Answer:	Yes. It will fit any firearm that has a Pic rail.
Question:	How sturdy is this mount with a scope on it is it very secure
Answer:	I too am losing sight in right eye (currently have 60-70% vision and im right handed. I shoot with my left eye right handed for my handguns and left handed left eye for my rifles. Best advice....learn to adapt, i did.
Question:	Will this provide enough clearance to mount a 50mm objective NightForce Scope on top of an AR
Answer:	Definitely aluminum. The fasteners may be made of steel, but the mount itself is aluminum.
Question:	Will this work on a Ruger precision rifle with the 20 moa base with the vortex viper pst 6-24x50 with the sunshade
Answer:	NO! The rings are spaced too far apart to be able to fit the Nikon P-223, keep in mind the P-223 is a very short scope, the rings overlap where the scope flares for the lenses by about .5 inch or so. I would suggest getting the Nikon mounts or individual rings.

• Dual ring scope mount for mounting standard 1 inch tube rifle scopes
• Mounts to any flat top Picatinny rail equipped rifle
• 2 inches of forward extension allows extra flexibility for optimum eye relief and shooting position
• Lightweight 6061 grade aluminum construction
• All Monstrum Tactical optics mounts come with a lifetime guarantee

User questions & answers

Question:	Will this fit my panzer arms ar
Answer:	You can press fn and Q to turn off the backlights, press them again to turn on the backlights.
Question:	I lost my sight in my right eye and would like to shoot right handed with my left eye. What kind of an off-set system do you have that I can do this
Answer:	After you turn it on, backlights is just single color. You can press "fn" + Q or "fn" + lamb key on the right side of the space bar to open the rainbow color. If you want to change different rainbow colors, you can press "fn"+RGB to change different rainbow colors.
Question:	I see a comment below that says it is made of steel, not aliminium, which is it really
Answer:	Yes, these keys works well with original apps from Apple.
Question:	Will this work with a Nikon P
Answer:	There’s two little circles on the bottom corners that you rotate outwards and it’ll let your iPad come right out

Product features

Weighs in at a mere 9 ounces!

Crafted from 6061 Aircraft Grade Aluminum. At a weight comparable to a set of lightweight rings, it provides the added rigidity and convenience of a one piece mount.

Built specifically for 1 inch scopes.

The mount is built for standard 1 inch tube scopes for mounting to any standard Picatinny rail equipped rifle.

The mount is 5.75 inches in total length. The base is 3 inches long with the mounting bolts spaced 2 inches apart, a minimum of 3 inches of rail space is required to install.

Heavy Duty Lockdown

The 12 hardened steel torx bolts allow you torque down your scope mount to specifications without worrying about stripping the screws like competitors.

The offset design provides an additional 2 inches of forward extension, allowing extra flexibility for optimum eye relief and shooting position.

Product description

Bestsight Rifle Scope Mount Rings 1 inch/ 30mm Cantilever for 20mm Picatinny Rail Dual Ring Adjustable Shooting





Specifications:



Material: Aluminum Alloy

Color: Black

Ring Diameter: 30mm (1.2”)

Reducer Diameter: 25.4mm (1”)

Product weight: 0.5lbs.

Package dimensions: 7.0 inch x 2.5 inch x 2.56inch





Package includes:

1 x Dual Ring Scope Mount

2 x Plastic ring diameter 1 inch(25.4mm)

1 x Wrench

• Fits 20mm picatinny weaver rails and for both 30mm and 25.4 mm (1 inch) body tube rifle scopes.
• [More Stable]Use of 6 screws in total is more stable and secure than 2 screws on standard mounts
• [Easy to Operate]Scope mount with two round buttons for easy detach.
• [Suitable for High Recoil]Hold up under heavy recoil sustained fire in the most extreme shooting circumstances.
• Defect: Whether it is installed or disassembled, you need to remove 12 screws

User questions & answers

Question:	Will this work on my cva scout v2 .45-70 govt
Answer:	Go with a mount with no forward cant. This is to push the scope forward and still be able to mount to the receiver.
Question:	do the screws holding the scope need to be torqued to specific amount
Answer:	It will work on any firearm regardless of caliber as long as the firearm has a mil spec 1917 picatinny rail or equivalent on top. Since you asked 7.62x54r, I'm going to guess Mosin Nagant. You'll need an adapter to mount this. Also, you might be better served with scope rings instead as they allow for a lower scope placement. This mount was designed for AR style weapons so it rests quite high.
Question:	Can this be mounted on gamo 6110017154 varmint air rifle .177 cal
Answer:	This item will fit on a Ruger Precision Rifle, but is designed to push the scope forward for more eye relief. I believe the standard model or the extended version would be a better fit on a bolt action rifle than this SPR mount.
Question:	what is the ring height from base of the mount to bottom of the ring? Will this fit a 54 mm objective lens scope on a flat top pictanny rail
Answer:	This is made in the USA at their factory in Tacoma, WA.

• Double scope ring mount for Picatinny/ Weaver Rail (21mm).
• Design in hollowed-out configuration between the ring and the bottom of the base, to release heavy duty when clamping your scope.
• Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately.
• The ring is for most scopes which are in 1 inch / 25.4mm scope tube. High profile, 0.71 inch gap from base of mount to bottom of rings. ( Item height: 2 inch)
• With 1 rail clamp screw and 2 scope clamp screw per side, ensure mount any 1 inch scope firmly, just twist off the nut and mount the base on the 21mm rail easily.

User questions & answers

Question:	Can you advise pls approximate height from rail to center of ring
Answer:	Did this mount work for your scope? I just bought that exact scope for my T/C Ventire 270win and wanted to know if u cleared ur barrel? Thanks
Question:	Tall enought to clear a scope with a 50mm front lens
Answer:	The mount is very sturdy. I use it with a Nikon P-300 mounted on a 300BLK rifle. I've never had any problems. Make sure to use locktite on screws.
Question:	Will this fit my benjamin nitro piston
Answer:	I have the 1.5" version of this in top of an AR10 (similar mount) and it's too low to clear my 50mm objective crossfire. You want this one. I'll post again after I get it mounted, but I only need another .25" so I'm confident this will resolve my problem.
Question:	Will these fit a 40mm scope
Answer:	If you have to ask that question, you don’t deserve that rifle...

Product features

Double scope rings mounts

• Design in hollowed-out configuration between the ring and the bottom of the base, to release heavy duty when clamping your scope.
• Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately.
• The rings are for most scopes which are in 1''/ 25.4mm scope tube. They are mounted on the 21mm Picatinny and Weaver Rail easily.
• With 1 rail clamp screw and 2 scope clamp screw per side, ensure mount any 1'' scope firmly.
• Install and remove by tightening or loosen nuts or screws with a wrench.

Product description

Nikon new p-tactical riflescopes provide the features you need to maximize your shooting experience-regardless of the platform you mount it on. Fully multicoated optical systems housed in rugged, one-inch, aircraft-grade aluminum main tubes brighten even the most dismal environments and unforgiving conditions.

• The BDC 600 reticle offers Shooters unique open circle aiming points and hash marks from 100 to 600 yards
• One inch body tube
• Spring loaded instant zero resets turrets
• Elevated windage and elevation turrets
• Generous consistant Eye relief

User questions & answers

Question:	What mount would this yse for a smith and wesson mp
Answer:	Nikon .5 moa mounts
Question:	Is it polyner ir aluminum
Answer:	It is aluminum
Question:	Was it made in China
Answer:	No Philippines, glass is priority
Question:	How to lock the turrets after doing zero
Answer:	No need to "lock." To adjust to zero you pull up on the turret, turn to zero and release. The turret snaps back down. Now you can turn the turret to adjust for elevation (or windage) without losing zero. I am constantly adjusting elevation depending on brand and type of ammo, or, of course distance..

Product features

NIKON P-TACTICAL SCOPES

Nikon’s P-TACTICAL scopes provide the features you need to maximize your hunting experience — regardless of the platform you mount it on. Fully multicoated optical systems housed in rugged, one-inch, aircraft-grade aluminum main tubes brighten even the most dismal environments and unforgiving conditions. The versatile 3x zoom ratio (on variable models) provides the field of view at the low end and the detail at the high end to satisfy most shooting demands. P-TACTICAL’s hash-marked MK1-MOA or MK1-MRAD reticles are matched to ergonomic turrets with directional indicators to make every come-up-or down — both simple and intuitive. Dedicated caliber models — including rimfire — match the reticle to your preferred caliber. When used in conjunction with Nikon’s free Spot On Ballistic Technology, all reticles offer exact holdover points or elevation adjustment for any long-range engagement.

Bright, Fully Multicoated Optics

Fuly multicoated optical systemshoused in rugged, one-inch, aircraft-grade aluminum main tube brighten even the most dismal environments.

Spring-loaded Instant Zero-reset Turrets

Windage and elevation turrets are clearly marked for quick adjustments. Rugged, aircraft-grade aluminum main tube.

Quick Focus Eyepiece

Smooth-turn aluminum ring with rubberized eye guard allows crisp reticle focus and quick target acquisition. Spring-loaded windage and elevation knobs can be reset to “zero” after sighting-in for easy reference when making field adjustments.

Waterproof/Fogproof/Shockproof

O-ring sealed to prevent moisture from entering body and nitrogen purged for total reliability against thermal shock. Shockproof construction shrugs off hard recoil and rugged use.

BDC 600

The P-TACTICAL line offers models with the newly designed MK1-MOA and MK1-MRAD reticles, as well as the platform-based, caliber-designated BDC 150, BDC 600, BDC 800, BDC SuperSub and BDC Carbine.

MK1-MOA

The MK1 reticle’s asymmetrical design allows for additional holdover and can be used to estimate range, target size, elevation holdover and wind-drift at the designated magnification.

BDC Carbine

The BDC reticles can be optimized with Spot On Ballistic Technology at NikonSportOptics.com/SpotOn

• Fits 20mm Picatinny Weaver rails
• Front ring top and both side feature picatinny for mounting laser flashlight and compact red dot and so on accessories.- 1" Rings
• Heavy duty - Scope Mount Weight about 8.38oz
• Mount provides 2" of forward scope positioning on the .223 flat top platform
• Riser Mount for Rifles with Picatinny/Weaver Rail, Ring bases are milled as a single, tough unit, and rear ring tops feature Picatinny tops for mounting additional accessories

User questions & answers

Question:	What is the distance between the two mounting bolts, from internal front edge of the first bolt to the internal front edge of the second
Answer:	Worked on my ar10 with vortex viper pst 5x25x50 so yes it should
Question:	I have a Bushnell 4.5-18x40 scope. Will this mount have enough back and forth adjustment for eye relief? mounting on flat top ar
Answer:	Yes it should work.
Question:	What aluminium is made of: 6061 or
Answer:	Man don’t want to give bum info I used this to mount a vortex Diamondback tactical 12x40 on a SIG 716 , I would suggest you call vortex they give awesome customer service
Question:	Can I turn this around and have the scope extend rearward over the stock for closer eye relief
Answer:	With the flat top that I have it works because it moves the scope forward to get my eye relief. I have a very small area to mount a scope, without this feature I wouldn’t be able to mount one.

Product features

1 inch Rings Heavy duty Cantilever Rifle Scope Mount

The mount is built for standard 1 inch tube scopes for mounting to any standard Picatinny rail equipped rifle.

Ring top feature picatinny for mounting laser flashlight and compact red dot and so on accessories

The mount is 5.3 inches in total length. The base is 3 inches long with the mounting bolts spaced 2 inches apart, a minimum of 3 inches of rail space is required to install.

• 6061 T6 Extruded Aluminum Construction
• Anodized Black
• Mil-Spec 1913 Picatinny Rails Upper Receiver
• 15 In-Lbs Screw Torque
• Standard Scope Mount Profile
• Included components: Scope mount, Torx screws

User questions & answers

Question:	Will this fit a hk
Answer:	XL
Question:	Will this work on a weaver rail
Answer:	M
Question:	Does this cowitness with a standard FSB
Answer:	Im 5'11", 204lbs, waist 36 and i had to get 2xl to fit me right. the shirt sleeves are short but i roll mine so it doesnt matter.
Question:	does the rail attachment screw thread into the aluminum
Answer:	That totally depends on the local environment. If you play in the desert you need camo with more tans and browns, in woods, more greens....

Product description

Designed for AR-style rifles, our SPR (Special Purpose Rifle) mounts are ultra-durable with minimal weight and bulk. Their specialized, sleek design delivers optimal height with a forward cantilever for AR platform rifles. They are constructed of lightweight, strong, aircraft-grade,6061-T6 aluminum with a durable, black matte anodized finish. Two models are available, designed for 1-inch or 30mm tubes.

From the Manufacturer

Designed for AR-style rifles, our SPR (Special Purpose Rifle) mounts are ultra-durable with minimal weight and bulk. Their specialized, sleek design delivers optimal height with a forward cantilever for AR platform rifles. They are constructed of lightweight, strong, aircraft-grade,6061-T6 aluminum with a durable, black matte anodized finish. Two models are available, designed for 1-inch or 30mm tubes.

• Thumb nut bolts for Turning leverage
• Optimal height and forward cantilever for all AR platform rifles
• Sleek design for low-profile mounting
• Thumb-nut bolts for turning leverage
• Optimal height and forward cantilever for AR platform rifles
• Sleek design for low-profile mounting
• Four-hole ring design for added gripping power
• Rugged cross-lock base design for ultimate gripping strength

User questions & answers

Question:	Will this mount fit the Marlin 336 factory drilled holes
Answer:	Tough question. Are your levi's really 32? Levis shrink when washed. I wear 32" 5.11. When I snap the waist and measure it's really 36" because of elastic. Amazon is very good about returns if they don't fit. Have fun.
Question:	Will this fit a remington 760 gamemaster? Or is this a picitinny only mount
Answer:	A very generous 16 inches. Perfect to fit over any work or military boot
Question:	Can any post the actual height from the center of the rings to the rail
Answer:	May be a tad long as you are a "31/32," but I've found that the sizes for these pants are pretty accurate. I'm 6.0 feet tall and take a 32/33 inseam; the 32 fits me fine.
Question:	Has anyone tried this mount with the Nikon P-223 BDC Carbine scope
Answer:	I wore mine for the first time yesterday on two separate hikes, the first was 8 miles, outside temp was 80 degrees F, the total elevation gain was 1900+ vertical feet, hiking with about 20 pounds of gear/water in my pack. By the time I reached the summit the crotch was soaked with sweat, seriously it looked like I peed my pants. I'm used to hiking in hot weather and have a variety of hiking pants from lightweight to fleece-lined for different conditions, these were hotter than I anticipated. The second hike was later in the day, at a higher elevation, and with cooler temps, during this hike, the pants finally dried out and were quite comfortable from then on. I think they'd be a perfect early/late season pant. My primary purpose for getting these was the ripstop material and to use them while bushwhacking through dense underbrush. They held up well in the overgrown trail I was on. My solution to the 'breathability' issue will be to add a series of 4 small grommets in the gusseted crotch area to allow for some air circulation, it's an easy fix to an otherwise solid pair of pants. I'll definitely be getting another pair as I like all the pockets, the heavy-duty belt loops, and the durability of the material.

Product features

Weaver Thumbnut Spr 1" Mount

Designed for AR-style rifles, our SPR (Special Purpose Rifle) mounts feature a specialized, sleek design to deliver optimal height with a forward cantilever for AR platform rifles. INTREGRAL RECOIL LUG BASE DESIGN FOR IMPROVED ACCURACY AND RETURN-TO-ZERO CAPABILITY.

• Optimal height and forward cantilever for AR-style rifles
• Integral recoil lug base design for improved accuracy and return-to-zero capability

• Dual ring scope mount for mounting standard 1 inch tube rifle scopes to Picatinny equipped rifles
• Slim profile design offers the weight of lightweight scope rings with the added rigidity and convenience of a one piece mount
• Attaches and detaches easily via integrated quick release mechanism, without additional tools or tightening
• 2 inches of forward extension allows extra flexibility for optimum eye relief and shooting position
• 5 ounces in weight and 5 inches in total length, with a base of 3 inches and 2.5 inches of spacing between the rings

User questions & answers

Question:	I have the Vortex crossfire 6 - 18 x 44. Will this help the front of the scope clear the rail
Answer:	It should fit anything with a picatinny rail on top
Question:	Will this mount onto a Ruger
Answer:	yes it will mine is a weaver rail taken several land sharks with mine
Question:	Will this fit a nikon p-223 3-9x40mm? it utilizes a 1 inch tube, but i'm worried about the spacing between the rings. thanks
Answer:	Yes
Question:	Will this mount be tall enough on a flat-top ar for a scope with 50mm objective? a 'precision' ar for longer distance shooting
Answer:	There are screws that thread in and hold the side against the rail. This model has 3 screws. Pretty standard for this style of mount. Plenty sturdy too. No problem handling the recoil of my 458.

Product description

UTG new Gen. 1" integral offset ring mount, Aircraft grade UTG ace-sync 1" high profile 50mm offset Pica tinny scope ring mount, Aircraft grade aluminum, precision cut inner ring, single mount utilizes locking torn screws and integral Pica tinny recoil stops for a secure zero hold, 100mm base, 22mm saddle heir.

• Included Components: Screw,Allen Wrench T20 Trox

User questions & answers

Question:	what do these fit a 1 inch tube or 30mm tube, your information is misleading in the listing, the number cross ref to leapers 1 inch tube
Answer:	It's 50mm.
Question:	Is this mount for a 1" tube
Answer:	I cant be 100% sure but i believe it will cause you can slide back and forth quit a bit, plus i guess if you had to ,you could turn it around. All my ar's have scopes and havnt had a issue yet, only issue is i had to get a charge handle extension. Hope this helps.
Question:	Any ironsight recommendation to use with this scope mount? They would need to be low enough to view through the base of the scope mount
Answer:	It never said on the package that I recall. My guess would be 6061 but I really don't know.
Question:	Will this work with a 50mm scope on an AR
Answer:	I'm not sure I have not turned one around but I don't see why it wouldn't work

Product features

UTG ACCU-SYNC30mm Integral Picatinny Rings

Detail Information:

• UTG ACCU-SYNC 30mm High Profile 37mm Offset Scope Rings, Comes in a Pair and Designed for a Precise Fit on MIL-STD-1913 Picatinny Rails
• Precision CNC Machined from Aircraft Grade Aluminum and Finished in a Matte Black Anodize
• Significant Lightening Cuts to Massively Reduce Weight Without Compromising Durability
• Radiused Edges and Corners to Prevent Snagging, Scratching, or Tearing of Other Gear and for Effortless Access to Scope Windage and Elevation Turrets
• Utilizes Locking Torx Screws and Square-shaped Integral Recoil Stops For a Secure Zero Hold
• 22mm Saddle Height, 37mm Offset Distance, 33mm Base Length, Fits 30mm Tube Optics with up to a 73mm Outer Objective Diameter
• Includes a T20 Torx Wrench for Simple and User Friendly Installation

About Us

We set un-compromised high standards for all of our business operations. Our goal is to provide a total solution for any line of products we offer. We pay close attention to industry trends with a focus on making the products available for hunting, shooting and outdoor enthusiasts like you.

In 2009, we made an important decision to start our Made-In-the-USA Manufacturing Operation. We will continue to follow our vision for U.S. made products, to be innovation-driven.

• Highly designed for the toughest situations
• Quality Machined with precision and accuracy
• Mounts that will be used for any environment
• Places your optic at the Ideal Height for MSR and similar platforms

User questions & answers

Question:	Is this a 1” tube
Answer:	Yes. Scope has 30mm tube and mount is 30mm. The scope has 4.0 inch eye relief which is plenty if installed on an AR.
Question:	Why does it say 40mm Mount? Once it was purchased
Answer:	The person that said the Crossfire II has a 1" tube is not necessarily correct. I bought a Crossfire II 1-4x24 and it is absolutely a 30mm tube. The larger magnification Crossfire IIs may likely have a 1" tube. Check the specs of the scope you have before ordering your mount!
Question:	So am i getting a 30mm or the 40mm it adds to my cart need a 30mm
Answer:	If you have a .50bmg you have enough money to get a actual Giselle or American defense lol. But on a serious not do not put a 30 mount on a .50 bmg
Question:	What is the height of the center of the ring from the rail, will a 50mm lens scope clear the rails alright
Answer:	Mine lock down. If yours don't they are not adjusted correctly.

Product description

With a rear ring that's positioned 1" forward, the Aero Precision Ultralight Extended Scope Mount offers better eye relief without unnecessary bulk. It features a cross-slot keyway that provides top-notch recoil protection. Designed for upper receivers with Mil-Spec 1913 Picatinny rails. Rugged 6061 T6 extruded aluminum construction with anodized black finish. "Ultralight" design delivers 1 of the lightest mounts in the industry. Scope ring: 1".

• For receivers with Mil-Spec 1913 Picatinny rails
• Rear ring pushed 1" forward for better eye relief
• 6061 T6 extruded aluminum + anodized black finish
• Department Name: Unisex-Adult

User questions & answers

Question:	How high is the centers of the rings seat above the rail
Answer:	It is not drilled for mounting. It needs to sit on a Picatinny rail.
Question:	what rise would I need for a 50mm objective
Answer:	Picitinny rail only but if you can mount a picitinny rail on the 760 it will work. Although the cheek weld wold be nonexistent.
Question:	What does the opening between the 2 clamps measure from inside to inside? Want to make sure the apra 210400 scope mount fits my Nikon P-300w/bdc scope
Answer:	1.5”
Question:	The picture shows 3 different scope mounts. Which one is it
Answer:	I have the Nikon P-223 3x32 BDC Carbine scope and this mount does NOT fit that scope. The distance of the outer edges of the rings are too far apart to fit the short carbine scope. Great mount but I had to return mine.

Product features

Manufacturing

'At Aero Precision we’re known for two things: superior engineering & machining, and the ability to get the customer what they need, when they need it. Our products have been recognized across the country by members of the military and law enforcement communities for a simple fact - they work better.'

Aero Precision’s roots are deeply tied to aerospace, and our drive for clean, perfect engineering and machining stems from that. When you’re building something that will fly in the air, there is no margin for error. We take that same approach in the firearms industry. Not every manufacturer will have razor thin tolerance levels. Not every manufacturer will personally oversee the development, design and machining of every part that comes off the line. We’re not every manufacturer.