11 best marine gps accessories

Product description

The RAM-B-111U consists of a double socket arm, 2.5" diameter round base and 6.25" x 2" rectangle base. The round base contains pre-drilled holes, including the universal AMPS hole pattern. The rectangle base contains different combinations of pre-drilled holes which will match up to many electronic devices and mounts, including Marine GPS, CB Radios, Ham Radios, Gimbal Brackets and more.

• Complete flat surface, drill-down mounting solution with an overall height of 5"
• RAM Mounts ball and socket technology allows for near-infinite adjustability
• Made of power-coated, marine-grade aluminum for durability and reliability in the most demanding marine environments
• Backed by a lifetime warranty
• Compatible with Garmin GPSMAP 162,Garmin GPSMAP 168,Garmin GPSMAP 175,Garmin GPSMAP 180,Garmin GPSMAP 180C,Garmin GPSMAP 182,Garmin GPSMAP 185,Garmin GPSMAP 188,Garmin GPSMAP 232,Garmin GPSMAP 238,Garmin Striker 5 Series,Garmin Striker Plus 5cv

User questions & answers

Question:	Will this work with a garmin striker 7sv
Answer:	Not sure if you are meaning fully st up in fishing mode the specs are listed for that at 75.5"L x 52.5"W x 59"H. It has plenty of room for one person no matter your size. Roomy inside and seat is comfy but as others have stated is very heavy with the mount. That is the only negative I had to say
Question:	This Ram mount can use for hds7and
Answer:	I have two rod cases, a small cooler, two buckets, buddy heater, vexlar, and seats in the sled. I usually lay my auger across the top. There is plenty of space in the sled but the one issue as with all shacks is the weight. Can get really heavy but I usually drive out.
Question:	Would this one work for my lowrance hook 2 4x
Answer:	Yes the 3265 is insulated and I went fishing with it for the first time for 3 day and has so much room you will not believe it
Question:	Will this work with garmin Chirp
Answer:	No cover.

• Socket technology allows for multiple adjustment angles and articulation of device
• Rubber coated tips will hold device firm and stable
• Spring loaded holder expands and contracts for perfect fit of your device
• High strength composite and stainless steel construction
• Powder Coated Marine Grade Aluminum, Marine Grade Stainless Steel Components & High Strength Composite
• Powder Coated Marine Grade Aluminum, Marine Grade Stainless Steel Components & High Strength Composite
• 1" Rubber Ball "B" Size

User questions & answers

Question:	I also see a similar item listed on here - RAP-B-166-2-UN7U - is there a difference
Answer:	So that you can align the phone vertically or horizontally as needed
Question:	What's the total length of the suction cup and arm assembly? I'm trying to figure out how far from my windshield it can position my phone
Answer:	I will suggest you Metal arm
Question:	Will this work with the Galaxy Note
Answer:	Yes, this mount would be a good choice for that phone in a case.
Question:	Will this work with the iPhone 6 Plus
Answer:	I am using it with an IPhone 6 Plus in a case that is a bit smaller than an otter box but there’s still enough space. I would say it fits. Great product: have two myself

Product features

Step 1: Thoroughly Clean Surface

Using glass cleaner and a microfiber cloth, thoroughly clean the desired area you wish to install the mount.

Step 2: Push Suction Cup Onto Surface

Push the suction cup base onto the surface and push against the glass while holding the twist lock to the OFF position. It is crucial you hold the base firmly and flush against the glass to ensure proper suction.

Step 3: Twist to Lock

While continuing to hold the suction base flush against the glass, use your thumb and index finger to twist the lock to the ON position. Tug on the base a little to make sure it is suctioned to the surface and not loose

Step 4: Attach Socket Arm & Holder

Attach any B size socket arm to the base and your desired device holder to complete your mount installation.

• 🐟 IMPACT-RESISTANT HARD SHELL 16" CASE - Features customizable foam for GPS fish finders, marine GPS chartplotters, boat depth finders and accessories. External dimensions: 16 x 13.5" x 6.5”
• 🐟 CUSTOMIZABLE FOAM INTERIOR - This case's pre-diced, impact-absorbing foam interior allows you to create custom compartments for fishfinders and depth finders for boats.
• 🐟 WATERPROOF, AIRTIGHT CONSTRUCTION - This durable travel case features a waterproof, airtight liner that will protect your fish finder with gps or boat depth finder from splashes and moisture.
• 🐟 SPACIOUS INTERIOR - The interior of this case can be customized to fit marine sonar fishfinders, mounts, transducers, cables, adapters and more. Maximum internal dimensions: 14" x 9.5" x 4.5"
• 🐟 FITS MOST POPULAR MODELS - Fits Garmin Striker 4, Lowrance, Humminbird Helix 5 Chirp, PiranhaMax, Raymarine Dragonfly, Simrad GO7, HawkEye, Ricank and more. PLEASE CHECK SIZING AGAINST CASE.

User questions & answers

Question:	Will i be able to fit both a helix 9 and helix 8 in this case safely? If not what size would i need
Answer:	I have a helix 8 and a lowrance that is only 3" x 5" and they fit pretty tight so I don't believe there would be enough room for a helix 8 and 9. Not sure what would hold both.

Product features

CASEMATIX - Protecting your stuff is our business.

With the CASEMATIX Waterproof Fish Finder Case you can keep your fish finder, power adapter, and other marine accessories protected at all times in a rugged, completely waterproof carrying case. The exterior is constructed from crushproof, hard polymer composite plastic and the interior of each case is lined with a mix of foam to provide maximum impact protection for your electronics. You spent a lot of money on your fish finder and marine electronics - invest in a case that's worthy of carrying them. Invest in CASEMATIX.

Body Armor for Your Fish Finder - Crushproof Blow-Mold Exterior

Each case's hard shell exterior is constructed from ultra-durable hard polymer composite plastic, offering maximum impact protection for your fish finder and accessories. Sure, you could toss your unit in a backpack or soft case - but if you want 360 degree protection for your marine electronics then a CASEMATIX hard case is the way to go.

External dimensions: 16" x 13.5" x 6.5”

Shock-Absorbing, Customizable Foam Interior

Our CASEMATIX Marine Electronics Case features a thick egg-crate foam top and includes a layer of dense, customizable foam that has been pre-diced to allow for easy compartment creation. Simply remove foam squares to create custom compartments for your devices.

Internal dimensions: 14" x 9.5" x 4.5"

Waterproof and Airtight with Locking Seal

This case was designed with a waterproof o-ring liner that will keep your marine electronics fully protected from water, moisture and dust. An integrated pressure release valve allows for the release of air when changing altitudes.

Heavy-Duty & Easy-Open Latches

In order to maintain the case's airtight and waterproof seal, we utilize a heavy-duty latching system. Just because our latches are rugged and reinforced doesn't mean they should be a chore to open up, though - so our latches have also been designed with easy-open functionality. You should be able to access your fish finder easily when you need it AND feel secure that your case is going to stay closed when you don't.

Comfortable Folding Carrying Handle

This case is ideal for travel with its briefcase-style design and built-in folding carry handle. Whether you're traveling in your boat, in a car, or just need a safe storage solution for your fish finder and marine accessories CASEMATIX has got you covered.

Padlock Rings for Added Protection

Worried about traveling with your valuable fish finder and other marine electronics? No problem - this premium case features molded padlock rings so you can toss locks (not included) directly onto the case and travel with the confidence that your electronics are protected from spying eyes and sticky fingers.

Ultimate Protection for your Fish Finder and Marine Electronics

The CASEMATIX Travel Fish Finder Case helps keep your valuable marine electronics safer, cleaner and more readily accessible. We understand your accessories are important, so invest in a case designed from the ground up to protect them

Protects your device from:

• Dirt
• Dust
• Grime
• Impacts
• Scratches
• Water
• And More!

Product description

Featuring a bright 2.6-Inch LCD color display with built-in basemap and high-sensitivity GPS receiver, the GPSMAP 78 series takes recreational navigation to a whole new level. All three models are waterproof, and include a built-in microSD card slot for loading additional maps and a dedicated MOB (man over board) button.

• Marine-friendly handheld with high-sensitivity GPS receiver and 2.6-inch color TFT display
• Perfect for boating/watersports--waterproof to IPX7 standards; floats in water
• Built-in BlueChart g2 U.S./Bahamas coastal charts with shorelines, depth contours, navaids, harbors, marinas, and more
• Built-in 3-axis tilt-compensated electronic compass and barometric altimeter for heading/altitude/weather
• Share your waypoints, tracks, routes and geocaches wirelessly with other compatible device user

User questions & answers

Question:	Does the 78sc include the Great Lakes coastal areas
Answer:	Hi Thomas,Since I just have the 78 I'm not sure. With the 78 I bought the micro card that gives me maps of all US, Canada, some Bahamas and Mexico. The original GPS without the card gave only a no detail sketch of landmasses. with the card, it does show depths and boys of the great lakes areas. According to the west marine catalogue, the SC comes with the chart I bought preloaded, which is a really good deal. Had I realized I would be buying the chip, it would have made more sense to get the SC. I'm thinking about adding the chip with topographic features for land travel. http://www.westmarine.com/buy/garmin--gpsmap-78sc-marine-handheld-gps-receiver-with-compass-and-barometer--11553609
Question:	how do i remove the trip odometer from the main navigation screen? It is overshadowing 1/4 of the screen at the top
Answer:	Hello,I would try this 1. From a main page, press MENU2. Select CHANGE DATA FIELDS3. Select a data field4. Press ENTER 5. Follow the on-screen instructionsThis menu should allow you to customize the Data fields shown etc.. Hope this helps thanks again
Question:	Gpsmap 78sc comes with bluechart g2 u.s./bahamas coastal charts. would that include inland rivers like the stjohnsriver in florida
Answer:	GPSMAP 78sc comes with built-in BlueChart® g2 coastal charts and a worldwide basemap with imagery — perfect for all your outdoor pursuits. Map detail includes shorelines, depth contours, navaids, harbors, marinas and more for the U.S. and Bahamas.I hope this helps.
Question:	Is there a clip on the back of the device
Answer:	No clip, but there is a lanyard.

Product features

Garmin GPSMAP 78sc Handheld GPS

For boaters and watersports enthusiasts who want to run with the best, the rugged GPSMAP 78sc includes preloaded U.S. coastal charts and features a 3-axis compass, barometric altimeter, crisp color mapping, a high-sensitivity receiver, new molded rubber side grips, plus a microSD card slot for loading additional maps. And it floats!

Explore Coastal Waters

GPSMAP 78sc comes with built-in BlueChart g2 coastal charts and a worldwide basemap with imagery perfect for all your outdoor pursuits. Map detail includes shorelines, depth contours, navaids, harbors, marinas and more for the U.S. and Bahamas. And, like the rest of the 78-series, 78sc is water resistant and even floats in water.

Share Wirelessly

With GPSMAP 78sc you can share your waypoints, tracks, routes and geocaches wirelessly with other compatible device users. Now you can send the location of your favorite fishing spot to a friend to find. Sharing data is easy. Just press “send” to transfer your information to similar units.

Product description

CASEMATIX Airtight Waterproof Marine Electronics Travel Case for Garmin Striker GPS Fishfinders and Accessories

This hard shell case's exterior is made of High-density polymer for superior external protection against blunt forces, drops and other unforeseen mishaps. Additionally, the case is fitted with an air-tight sealing gasket which locks out water and air to add the highest level of protection to your electronics. Interior protection consists of two customizable cubed foam Foam Cores (2.2" thick), a Dense Flat Foam Base(Bottom, .25") and a Convoluted Egg-Crate Foam Lid(Top , 1.5"). With a highly durable exterior and dense foam interior, you can be sure your equipment has reliable storage and protection.

Safely Transport Your Fishfinder and Accessories on All your Fishing Adventures

Keep your accessories organized and safely stored when traveling with your valuable equipment. The carry handle makes this case perfect for transport and to keep by your side. As well, there are dual padlock holes for added security. This case 10.5’ x 10.5” x 4.75” in exterior dimensions, and internally fits fishing and boating equipment and accessories with maximum customizable internal space of 8" x 6" x 3.25".

Customizable Pre-cut pluckable Interior Foam To Create Custom Compartments for Fishfinders and Accessories

The foam layers included inside of this hard case provide superior protection to your Electronics. The two middle 2.75" thick Customizable Foam Core is easily customizable to provide a snug cushion around your fishfinder and accessories. This prevents your equipment from moving within the case and provides impact protection from all angles. Create custom compartments for your fish finder and accessories by removing the amount of foam desired.

• CASEMATIX Ruggged Waterproof Fishfinder Carry Case For Garmin Striker 4 , Striker 4cv , Striker 5cv and Compact Fishing Accesories
• Ultra-Durable exterior made of High-Density polymer to withstand significant impacts . Includes Internal foam cushioning with customizable pre-cut cubed foam layer to absorb bumps and shock
• Customizable Foam interior allows you to design custom fit compartments for Your Fish Finder and Accessories
• Ideal for transport and storage of portable fishfinders for ocean fishing , lakes and more
• Water-proof and airtight seal ; Sturdy carrying handle ; Thick Polymer plastic ; 4x protective foam layers

User questions & answers

Question:	I’m planning on a float trip, can I count on this to keep phones and emergency supplies safe and dry
Answer:	Yes this keeps everything dry inside. Make sure the knob on the front is tight and you shouldn't have any worries.
Question:	Can I put a transducer battery in here and use this in my kayak to keep the battery safe and dry
Answer:	Yes
Question:	Does this work for jjrc bellwether 2 drone
Answer:	You will need one size case larger. As the dimensions of this case are: 10.5 x 10.5 x 4.8 inches. Your drone Bell 2 dimensions are 12.79 x12.79 x 4.3 inches.
Question:	What are the interior measurements
Answer:	GOOD QUESTION! With no side foam and no room for the waterproof seal screw, it JUST fits my device which measures 8.5×7.2×2.5″ with about 1/3 inch on each side

Product description

Garmin GPSMAP 78. Garmin international is pleased to announce the next generation in marine handhelds: the GPSMAP 78 series. Incorporating a sleek, new design and must-have features, these rugged units are a great fit in Garmin's best-selling lineup of color marine handhelds and they float! Featuring a bright 2.6-inch LCD color display with built-in basemap and high sensitivity GPS receiver with HotFix, the GPSMAP 78 series takes recereational navigation to a new level. All three models are waterproof, include a built-in microSD card slot for loading additional maps and have a dedicated MOB (man over board) button. If you're looking for the ultimate high-performance marine handheld, take your pick from the GPSMAP 78 series. Features:. High-sensitivity, WAAS-enabled GPS receiver and HotFix Floats Rugged, waterproof (IEC 60529 IPX7) Worldwide built-in basemap with shaded relief 1.7 GB of internal memory, plus microSD card slot for optional mapping and data storage Bright 2.6" LCD sunlight readable color display (160 x 240 pixels) Up to 20 hours of battery life, battery type: 2 AA (not included) NiMH or lithium recommended Weight: 7.7 oz with batteries. Package Includes:. Unit, USB cable, wrist strap and quick start manual

• battery: 2 aa batteries (not included); nimh or lithium recommended
• memory: 1. 7 gb
• display resolution: 160 x 240 pixels
• "display size: 1. 43" x 2. 15"; 2. 6" diagonal"
• "physical dimensions: 2. 6" x 6. 0" x 1. 2"
• marine-friendly handheld with high-sensitivity gps receiver and 2. 6-inch color tft display
• perfect for boating/watersports-waterproof to ipx7 standards; floats in water

User questions & answers

Question:	Is this model the 78sc
Answer:	as per the picture of this model it does NOT look like it is the sc model. i have the 78sc and it is labeled that way on the front of the unit
Question:	hi again, morning. does the gamin model 78 have build in compass? thanks
Answer:	In spite of the large number of "yes" answers, the answer is NO. The 78 has no compass, but you can select the more expensive 78s, near the top of the listing. It and the even more expensive 78sc DO have a compass (and a barometer/altimeter). You don't really need a compass with a GPS, since walking a few feet in any direction can produce a track on the screen, which shows you the direction you're moving. A GPS is much more useful than a compass. To be clear, the 78 does have a compass "page" which can show you which way you're moving, but if you stop it doesn't work. It can also show your altitude, but without an altimeter the altitude estimate averages about twice the error as the location estimate, so it might not be too useful.
Question:	Does theGarmin GPS78sc come with already downloaded marine charts or not? I need one for the greater Puget Sound area, but and need charts for it
Answer:	Direct from garmin site on 5/15/16 ....For boaters and watersports enthusiasts who want to run with the best, the rugged GPSMAP 78sc includes preloaded U.S. coastal charts and features a 3-axis compass, barometric altimeter, crisp color mapping, a high-sensitivity receiver, new molded rubber side grips, plus a microSD™ card slot for loading additional maps. And it floats!Explore Coastal WatersGPSMAP 78sc comes with built-in BlueChart® g2 coastal charts and a worldwide basemap with imagery - perfect for all your outdoor pursuits. Map detail includes shorelines, depth contours, navaids, harbors, marinas and more for the U.S. and Bahamas. And, like the rest of the 78-series, 78sc is IPX7 waterproof and even floats in water.
Question:	what is the difference between 78 and 78sc
Answer:	78sc = Sensors and Charts78s= Sensors , no charts78= no sensors, no chartsSensors are Barometer and Compass
Question:	Can this be used as a chart plotter
Answer:	Yes, this unit comes pre-loaded with Bluechart g3 maps. Mike, Garmin
Question:	can bluechart g2 maps be loaded on to the device
Answer:	It has BlueChart® g3 Coastal Charts already on it. Mike, Garmin
Question:	Does it have talk to text
Answer:	No. Mike, Garmin
Question:	Is the gpsmap 86sci handheld compatible with activecaptain
Answer:	At the time of my order it did not, but there was an update a few days ago for autopilot... so maybe it works now.

Product description

The GPS Speedometer is a drop in replacement for your current speedometer to match your existing instrument dash. GPS information is gathered from an internal GPS antenna. No external antenna required. The Faria GPS Speedometer uses a highly accurate 48 channel GPS receiver. You can be sure that the Faria GPS Speedometer is giving you the most accurate GPS information available on the market today.

• No external GPS antenna required
• Available in multiple Speed ranges (15-120 MPH, 25-200 KPH and 15-100 Knots)
• Premium LED back-lit dials
• Available LCD displays Compass Rose heading and Actual heading (COG)
• Ultra fast Satellite acquisition time (TTFF) 1 second from Hot start

User questions & answers

Question:	What size diameter is this Speedometer
Answer:	Fits 3 1/4 hole, 3 3/4 face
Question:	what color is the back lighting
Answer:	No color--- plain glass light bulb.
Question:	What is the refresh rate of this speedo? As in, if I accelerate or decelerate quickly will it sweep smoothly or will it jump
Answer:	Sorry have not put the boat in the water yet . But the techs at Fariabede told me that it’s a smooth transition when I called them about buying the gauge . Those guys are great with the tech help .
Question:	Does this gps speedo have the same look as the faria white kit i ordered
Answer:	Yes it does.

Product description

Perimeter lighted White dial with stylish blue and black graphics. Polished stainless steel bezel. Contoured black pointer and domed glass lens. Measurements in standard and metric units with icons.

• Product Type:Auto Accessory
• Item Package Weight:0.68 Pounds
• Item Package Dimension:12.7 cm L X13.97 cm W X15.875 cm H
• Country Of Origin: United States

User questions & answers

Question:	How well does it work in remote places? Like where there is no cell service
Answer:	It works off satellite not cell service so as long as your not under a bridge, in a building or under alot of heavy tree coverage it should work good.i bought it for my boat and it works great
Question:	What are the deminsions of this speedo.... i have an 02 cc ski nautique with a 3.5" faria speedo - thanks
Answer:	Yes 3.5 will work , mine works great you have to follow the wiring, but not bad any questions they have a # no you can call for a tech.
Question:	What are the dimensions of the gauge
Answer:	The website says 5.5 X 5 X 5.5 and 10.9 ounces. It's the same size as the larger speedometers and tachometers. Very accurate and never has a pitot tube to clog up. I've had it for two seasons and needs no external antenna and works good at BOTH high speed and slow speed.
Question:	q #2: this ad states, "compass rose heading and actual cog", but i don't see it on the gauge's face, only the speedometer. how is this displayed
Answer:	There is no compass on mine. It looks exactly as shown on the photo. FWIW it has worked flawlessly for 2 seasons so far.

Product description

The Cobra MR F77 is a truly unique VHF radio with its large LCD display and an integrated GPS receiver making the radio ready out of the box to be a complete life saving solution. If a user sends a vessel Distress, their EXACT position will be sent to the rescue authorities.

• Built In GPS Receiver – Simply power on and your VHF radio will instantly know your location for sending signals in moments of distress. When it comes to safety and emergency readiness out on the water, the Cobra MRF77 GPS radio sets the standard.
• Maximum Coverage – This VHF marine radio allows operation of channels in the US, Canada, and internationally at 1 or 25 watts with dual output power for optimal short and long range communication.
• Replay Missed Calls – The rewind-say-again feature automatically records the last 20 seconds of incoming transmissions, optimal in noising conditions to make sure you never miss important information from you boat.
• Easy Communication – Communicate with boaters around you with the Public Access external speaker function and communicate through the noise canceling microphone which blocks background noise.
• LCD Display – The Signal Strength Meter shows incoming signals on the large illuminated LCD display. Navigate the various features of this emergency radio easily with the illuminated function keys, and use TriWatch to scan three channels at once.

User questions & answers

Question:	does this radio come with an antenna cable
Answer:	There is 2 chips in the box, 1 standard card and a micro sd, the micro should work in the hook.
Question:	What do you do with the ancillary wires if not used ie those for the external and public address systems and the Cobra Positionion System Plug
Answer:	NO
Question:	can i get channel 0 on the mrf57we radio
Answer:	I believe so. Go to the Navionics website and check the compatibility list for your specific plotter.
Question:	Can radio be used to connect with a walkie-talkie
Answer:	Hi Daniel,This chart includes the Columbia River which has the shipping lanes.

Product features

Instant Channel 16/9

Instant access to channel 16 and channel 9 for emergency situations.

Memory Scan

Scan channels programmed in memory to find conversations in progress.

All NOAA Weather Channels

Instant access to national hazards and weather information, 24 hours a day.

Selectable Power Setting

Produces 1, 3 or 6 watts of output power for near or distant calling.

Submersible

Designed to IPX8 (JIS8) standards for water submersion.

Emergency Weather Alert

Alerts you to weather emergencies with a tone on a weather channel you can select for your area.

Product description

The Uniden BC-GPSK provides a simple solution to connecting a GPS to your Uniden location-based scanner or other NMEA-compatible device. The included cable plugs directly into a DB-9 RS-232 port. The optional Uniden GPS adapter cable (BWZG1844001) easily connects to Uniden handheld scanners and the HomePatrol-1. The compact GPS design includes a magnetic base to easily secure to your vehicle. Its weatherproof design lets you mount the unit outside, for best satellite signal reception. It also works with the BCT15X and BCD996XT.

From the Manufacturer

• Use for Automatic Reporting Systems (APRS)
• Compatible with many Marine Radios for position plotting and reporting
• Waterproof housing
• SIRF III Chipset for rapid satellite acquisition

User questions & answers

Question:	How long is the interface cable from the GPS pod that goes outside to the scanner
Answer:	Don't know exact size but easily makes it from the center shift console to the inside of the windshield on a 1996 JEEP GRAND CHAROKEE LARADO
Question:	can it be used with bcd436hp scanner(uniden
Answer:	Yes I use it on both. There is a serial adapter that comes with it so you can plug it into the handheld. Works perfect when traveling even automatically changing scan of nearby. I have used it on a 500mile trip in the car with no issues
Question:	The photo shows the gps without a serial connection. Why do i need a serial connection for my bcd436hp
Answer:	Trust me on this one because description is confusing. I ordered a serial port & did not need to do so. Everything you need is included.
Question:	Is there an extension cable available for the gps pod that mounts outside? as i understand the existing antenna cable is only 4-6 ft long
Answer:	Just use a straight through serial cable or PS2 cable extension.

• 【Size】: Fits all standard 1-inch marine antennas. Base measures 3.62x 2.52 inch.
• 【316 Stainless Steel】:TINGZHIGO Marine VHF Antenna Mounts are made of 316 stainless steel. In humid air or high-temperature weather, compared with 304 stainless steel or iron material, 316 stainless steel has stronger anti-rust, abrasion resistance.
• 【Dual Swiveling Ratchet Design】Dual swiveling ratchet design, the marine VHF antenna mounts have two adjustable ratchets that can be easy to adjust mounting on slanted or level surfaces.
• 【Easy for installation】Upper ratchet: When the handle is set upright, you can adjust upper ratchet, it has an adjustable angle of 270 degrees. Once you have determined the angle you want, pull the handle down to hold it in place. Lower ratchet: First, you loosen the screw in lower ratchet and you can adjust it to the angle you want. The lower ratchet has an adjustable angle of 180 degrees. Finally, you have determined the angle you want, tighten the screws in lower ratchet.
• 【Packaging】: 1x Marine VHF Antenna Mount,4x Screws,4 xBolts,4x Nuts . We provide screws for you to install. You can choose the screws according to your actual situation. (Screws are made of 316 stainless steel). Before delivery, we will carefully check each product to ensure the quality of our products, make sure that there will be no deformation and fading will occur. Please feel free to buy it. If there is any problem, please contact us, and we will try our best to solve your problem.

Product features

Easy for installation

1. Upper ratchet: When the handle is set upright, you can adjust the upper ratchet, it has an adjustable angle of 270 degrees. Once you have determined the angle you want, pull the handle down to hold it in place.

2. Lower ratchet: First, you loosen the screw in the lower ratchet and you can adjust it to the angle you want. The lower ratchet has an adjustable angle of 180 degrees. Finally, you have determined the angle you want, tighten the screws in the lower ratchet.

316 Stainless Steel

TINGZHIGO Marine VHF Antenna Mounts are made of 316 stainless steel. In humid air or high-temperature weather, compared with 304 stainless steel or iron material, 316 stainless steel has stronger anti-rust, abrasion resistance.

Dual Swiveling Ratchet Design

Dual swiveling ratchet design, the marine VHF antenna mounts have two adjustable ratchets that can be easy to adjust mounting on slanted or level surfaces.

316 Stainless Steel Screws

4x Screws,4 xBolts,4x Nuts. You can choose the screws according to your actual situation. (Screws are made of 316 stainless steel).