10 best raymarine fish finder for kayak

Product description

The striker Plus 5cv Fishfinder with a bright 5” display and built-in GPS features Garmin CHIRP traditional sonar, Garmin CHIRP Clearly scanning sonar and Quickdraw Contours map drawing software, which stores up to 2 million acres of content with 1’ contours. The built-in GPS lets you mark and navigate to waypoints and shows your boat's speed.

• Includes transducer for built-in Garmin CHIRP traditional sonar plus CHIRP ClearVü scanning sonar
• Built-in Garmin Quickdraw Contours mapping software lets you create and store maps with 1’ contours for up to 2 million acres
• Built-in GPS lets you mark waypoints, create routes and view boat’s speed. Frequencies supported : Traditional: 50/77/200 kHz
• Bright, sunlight-readable 5” display and intuitive user interface
• Rugged design for every fishing environment. Display resolution: 800 x 480 pixels

User questions & answers

Question:	How long is the cord from the transducer to the unit itself
Answer:	On my Sun TRACKER 16 foot easily reaches from the battery to the display. Transponder on the front reaches to the counsel.
Question:	Does this gps have a chip slot
Answer:	No again you need too buy a different model....
Question:	Will this work on a Kayak, will the transducer fit through the scupper holds
Answer:	You only need to run the transducer wire and plug up through your scupper hole to and plug it into the back of the unit. No need to fit transducer through scupper.
Question:	Con que accesorios viene este gps
Answer:	transductor y kit de instalacion

Product features

Garmin Striker Plus 5cv with Transducer, 5" GPS Fishfinder

The STRIKER Plus 5cv fishfinder with a bright 5” display and built-in GPS features Garmin CHIRP traditional sonar, Garmin CHIRP ClearVü scanning sonar and Quickdraw Contours map drawing software, which stores up to 2 million acres of content with 1’ contours. The built-in GPS lets you mark and navigate to waypoints and shows your boat’s speed.

Garmin Quickdraw Contours

Nobody knows the waters you fish better than you and your fellow fishermen. While you are trolling the shorelines and the depths, Quickdraw Contours mapping software creates HD fishing maps of the places you’ve been. No special knowledge is required.

Product description

The STRIKER Plus 4 fishfinder with a bright 4.3” display and built-in GPS features CHIRP sonar for crystal-clear images and Quickdraw Contours map drawing software, which stores up to 2 million acres of content with 1’ contours. The built-in GPS lets you mark and navigate to waypoints and shows your boat’s speed.Display resolution: 272 X 480 pixels

• Includes dual-beam transducer with Garmin Chirp traditional sonar for crystal-clear images and remarkable target separation
• Built-in Garmin quickdraw contours mapping software lets you create and store maps with 1’ contours for up to 2 million acres
• Built-in GPS lets you mark waypoints, create routes and view boat’s speed
• Bright, Sunlight-readable 4.3” display and intuitive user interface
• Rugged design for every fishing environment. Frequencies supported: Traditional: 50/77/83/200 kHz, Transmit power: 200 W (RMS)

User questions & answers

Question:	Does this Garmin fish finder comes installed with maps (Marine maps
Answer:	There is no way to put any maps on this unit but it does have storage to make your own maps. It has a mapping feature so you can map the depths of your favorite lake. The specs says it will hold 1 million acres of lake maps. Granted, you have to be on a boat and troll to do the mapping but it does work and it works rather well.
Question:	For in hull transducer mounts for a fiberglass boat, Garmin suggested putting the transducer in a container full of antifreeze. Any other methods
Answer:	I can’t speak to fiberglass as I use mine on kayak. However I do use my transducer shooting thru hull attached with duct seal that forms a reservoir around transducer and then I add water. That works perfectly! Duct seal is $3 at Lowe’s or Home Depot.
Question:	What's the difference between this and the "garmin striker 4 with transducer, 3.5" gps fishfinder with chirp traditional transducer
Answer:	This one has a feature where you can contour maps the bottom of any lake or river you're in.
Question:	how many holes do i need to drill to install the transducer
Answer:	Don't drill holes in your boat. Find an old 3/8-1/2" plastic cutting board and cut a 4x4 piece out of it and using 3m sticky tape mount it to the transom and use short screws to mount the transducer to the piece of cutting board. Did that back in 1979 and has never come loose.
Question:	Whats the maximun depth that it can read
Answer:	It’s in the description I believe. Otherwise YouTube has this information
Question:	Will this work in shallow waters? What is the minimum depth it will read accurately? Read a review where it was said to lose use under 10 feet
Answer:	I know from experience it can read depths as shallow as 1 foot but I don’t know the exact limitations or specs. The problem that renders this and any fish finder useless in shallow water is the amount of vegetation and its direct proximity. In shallow water with dense vegetation reaching the surface you’re most likely only going to see screen noise displayed which may effect the abilities to properly gauge water depths. If there is no vegetation and the ground is of solid structure then this will work fine in water 10’ or less.
Question:	Can the transducer be mounted on the trolling motor
Answer:	Yes it’s come with all the hardware needed to install you might have to change some things depending on your trolling motor
Question:	Will I be able to see the screen with polarized sunglasses
Answer:	Yes you can because I am using as well the polarized glasses with a light yellow tint

Product features

Garmin STRIKER Plus 4 With Dual-Beam Transducer

The STRIKER Plus 4 fishfinder with a bright 4.3” display and built-in GPS features CHIRP sonar for crystal-clear images and Quickdraw Contours map drawing software, which stores up to 2 million acres of content with 1’ contours. The built-in GPS lets you mark and navigate to waypoints and shows your boat’s speed.

Garmin Quickdraw Contours: While you are trolling the shorelines and the depths, Quickdraw Contours mapping software creates HD fishing maps of the places you’ve been.

CHIRP Sonar Clarity: The STRIKER Plus 4 fishfinder includes Garmin CHIRP technology for a higher level of clarity and detail that you have come to expect from Garmin. Crystal-clear sonar images provide remarkable target separation and resolution in shallow and deeper water. Bottom contours are more visible, even at higher speeds, and signal noise can be suppressed at greater depths for a timely interpretation of what’s below.

• ☀ The portable fish finder, with updated 2.4inch TFT color LCD screen(more clear to display), can detect and display underwater contour, water depth, water temperature and fish size(big/middle/small) and fish depth. It has two user modes: TRANSDUCER/SIMULATION. Try all functions in simulation mode and go fishing in transducer mode.
• ☀ Lucky fish finder portable provides you 26FT wired operating distance and 328FT depth detection. Kayak fish finders has 45° beam angle with 200Khz in detection.
• ☀ The fish finder portable is rechargeable. Come with USB cable for charging. The fish depth finder can work continuously about 5 hours with full charge. The brightness of the display can be adjusted. Read the data either at night or in the sunlight easily.
• ☀ Various features settings: Lucky portable fish finder is with updated underwater contour display(3 kinds of display. You can choose, more clear and professional). Also, set up sensitivity, screen brightness, depth range, zoom, depth alarm, fish alarm, fish icon, units(FT/M ℃/℉)alter and language by yourself.
• ☀ Go fishing with the fish depth finder in different ways, such as ice fishing, river fishing, sea fishing, shore fishing, kayak fishing, etc. The bracket allows you to attach the sensor transducer to your boat or kayak.

User questions & answers

Question:	any body use this for ice fishing or jigging
Answer:	You can use it for ice fishing. Just dig a hole and put the transducer in the water under the ice.
Question:	does it work in water that in not clear
Answer:	Yes, sonar works in any water conditions. The lake I usually fish is sometimes muddy and this unit works well all the time. I use this in a kayak and have been very happy with the purchase.
Question:	Can you cast it
Answer:	Yes but but it only goes as far as the cord about 50 ft. Its easily tossed but I just let it float and the water pulls it out. Great screen well worth thr price.
Question:	Can it be powered from a 12V boat battery, or only internal AA batteries
Answer:	It has an internal battery that's charged via mini USB. If you have a 12v utility plug or know how to wire one up than yes can be charged o. The boat.

Product features

Wired Sonar Sensor Transducer

• The kayak fish finders comes with a wired sonar transducer.
• The wired transducer operating distance is about 26FT.
• The transducer depth detection range of the fish depth finder is from 2.3ft(0.7m) to 328FT(100m).
• Cast the transducer of the kayak fish finders either by your hand or by fishing rod.

Colored and Clear Display

• With more professional display--colored and clear. The lucky portable fish finder shows you the bottom contour under the water.
• The kayak fish finders displays the water depth, water temperature, fish size, fish location and underwater contour in details.
• Easy to set the portable fish finder. It is a indispensable fishing gear in your tackle box.

Specifications

1. Display:2.4inch TFT color LCD, pixels:240Vx960H
2. Depth Capability:328feet(100m)
3. Sonar Coverage:45 degrees beam angle in 200Khz
4. Power:3.7V rechargeable lithium batteries
5. Waterproof design:level-4(spray-water-proof)
6. Operational Temperature:14°F to 122°F(-10°C to 50°C).

For Ice Fishing

1. You should clear the snow on the ice layer. Make sure the surface is smooth enough. Put the fish depth finder directly on ice layer to detect fish distribution in purpose of selecting a place to drill a hole
2. There should be no air between the sensor and the ice and no air between ice layer and the underwater either. Otherwise, the portable fish finder will not work properly.C
3. ut a hole through the ice and put the sonar transducer directly in the water. Enjoy the fishing gear.

For River & Sea Fishing

1. Fix the sonar transducer to the boat hall if fish by kayak or boat.
2. Fix the sonar transducer by the removable float if you choose to cast the transducer into water.

Product description

Cruise 5 US Coastal with 83/200 Transom Mount Transducer

Simrad Cruise is the most intuitive, easy-to-use chartplotter available. Everything you need for simple and straightforward GPS navigation is right inside the box - sunlight viewable display with US coastal charts, mounting bracket and a sonar transducer. Simrad Cruise can display charts, navigation and sonar in split-screen view, or separately in full screen. Rotary dial and keypad controls make navigating through menus, creating routes and accessing temperature, speed, depth readings and battery voltage effortless.

Smooth Navigation Between Menus

Simrad Cruise features intuitive menus, so you can quickly find the information you need, when you need it, and rotary dial and keypad controls make navigating from screen to screen effortless. Put away the instruction manual; with Simrad Cruise, you simply turn on your display and go!

Always on course

Know where you are and where you are going! Pre-loaded with a US coastal map and worldwide basemap, Simrad Cruise comes complete with all the charts you need to enjoy your day on the water. Want more detail? Choose from a wide range of enhanced charts from C-MAP and Navionics, and enjoy advanced features like C-MAP Easy Routing for a true navigation experience.

Everything in view

See the details you want the way you want them! Simrad Cruise offers both full and split-screen views, so you can easily display the information you need. Plotting your course? Select full screen charts for a maximum view of your surroundings. Not sure what's underneath you? Choose full screen sonar for a clear view of the bottom and automatic depth tracking. Want to see it all? Use the split-screen option for the perfect combination of chart and sonar data.

Stay informed

Simrad Cruise gives you access to the information you need for a safe and enjoyable time on the water. Depth readings, position, battery voltage and other critical boat in

• CRUISE CONFIDENTLY: Simrad Cruise is the most intuitive, easy-to-use chartplotter available. Everything you need for simple and straightforward GPS navigation is right inside the box.
• ALWAYS ON COURSE: Preloaded with a US coastal map, Simrad Cruise comes complete with all the charts you need to enjoy your day on the water. Supports enhanced charts from C-MAP and Navionics.
• EFFORTLESS CONTROL: Intuitive menus let you quickly find the information you need, when you need it. Rotary dial and keypad controls make navigating from screen to screen effortless.
• STAY INFORMED: Depth readings, position, battery voltage and other critical boat information, can all be monitored on your screen for quick reference and situational awareness.
• CHIRP SONAR TRANSDUCER: Included 83/200 transducer provides excellent automatic depth tracking for worry-free operation without the need for fine tuning or pre-programming.

User questions & answers

Question:	Is the simrad cruise 5 chartplotter waterproof? will it handle a hard rain
Answer:	Will find out after this storm is done to night
Question:	does it come with a sun cover
Answer:	Thank you for your inquiry. The Cruise-5 unit does come packaged with a sun cover. We do hope this information is helpful.
Question:	Can it be used on a 32 ft sailboat? looking for an entry level chartplotter. i already have a is20 windy display. just need a gps and depth indicator
Answer:	Probably. No cover though.
Question:	Are the maps of the Chesapeake bay pre loaded? Does it show all day markers and everthing you could run into at night
Answer:	I’m in Florida and all the channel markers are clearly seen nice gps oh and maybe you should use a spot light as well to be a little safer

Product description

Find more fish using the ECHOMAP™ UHD 74cv combo with a bright, sunlight-readable 7” touchscreen with keyed assist. The included GT24 transducer provides Ultra High-Definition Clearly scanning sonar, so you get a crystal-clear image of what is below your boat, and Garmin high wide CHIRP traditional sonar delivers remarkable target separation. This combo comes preloaded with BlueChart® G3 coastal charts with the best of Garmin and Navionics® data. It features a quick-release bail mount, making it easy to remove and take with you. Nmea 2000® and NMEA 0183 network support provides you with engine data, sensor Connection, autopilot integration and more. Echomap™ UHD 74cv is even compatible with the force™ trolling motor for full control of the motor from the screen plus the ability to route to waypoints, follow tracks and more.

• Bright, Sunlight-readable 7” touchscreen with keyed assist
• Includes GT24 transducer for ultra High-Definition clearer scanning sonar and Garmin high wide CHIRP traditional sonar
• Preloaded bluechart G3 coastal charts with integrated Navionics data
• Supports Panoptix all-seeing sonar, including Panoptix live Scope sonar
• Sonar sharing capabilities with other ECHOMAP Plus, ECHOMAP UHD and ECHOMAP Ultra units
• Included Components: ECHOMAP UHD 74cv with BlueChart g3 for U.S.; GT24UHD-TM transducer; Power/data cable; Tilt/swivel mount with quick release cradle; Flush mount; Protective cover; Hardware; Documentation

User questions & answers

Question:	Does this come with all cables and mounting bracket
Answer:	Yes, comes with everything needed to install and use.
Question:	can i use the gps without mounting the transducer ? I'm taking a trip and don't have time to install it
Answer:	Yes, it will work fine as a gps without the transducer mounted or connected
Question:	Will this work in international water or the U.S only
Answer:	It will work anywhere on earth.
Question:	Can i mount the transducer to shoot through the hull? my garmin echo 500c is set up that way now
Answer:	No, these transducers include sidevu which will not work shooting through a hull.

Product features

Garmin ECHOMAP UHD 74Cv With GT24UHD-TM Transducer

SONAR SUPPORT

This chartplotter supports a variety of Garmin transducers (sold separately), including the Panoptix LiveScope scanning sonar system, which lets you see all around your boat in real time.

INCLUDED TRANSDUCER

This chartplotter comes with a GT24 transducer for Ultra High-Definition ClearVü scanning sonar, which shows you a crystal-clear image below your boat. Plus, you get Garmin high wide CHIRP traditional sonar for remarkable target separation.

PRELOADED CHARTS

Experience unparalleled coverage and detail with preloaded BlueChart g3 coastal charts featuring integrated Navionics data. Charts cover the coastal U.S., including the East and West coasts, Gulf of Mexico and the U.S. and Canadian sides of the Great Lakes.

• 【Fishes and Contour Readout】The fish finder portable detects and displays water depth, approximate fish location, fish size, short & tall weeds, sand & rocks on bottom.
• 【Suitable for Various Fishing Ways】It can be used for off shore fishing, kayak fishing, ice fishing, lake fishing, sea fishing , river fishing, and so on. It will be one of your best fishing accessories.
• 【Depth Readout】 The fish finder portable detector range is in a 45°cone underwater. The detection of depth range is from 3ft(1m) to 328ft (100m) below fishing sonar transducer. The fishing sonar sensor is with 25 ft cable and removable transducer float. Water depth shows by meters/feet.
• 【Powerful Functions】5 modes sensitivity options; battery save mode; backlight mode; fish alarm; unit of measure. Normally fishing depth finder supports 4-5 hours continuous working with brand new batteries. Open battery save mode can be working even longer.
• 【Durable EVA Case】Hard EVA case is handy and comfortable hand carry strap. Enjoy your next trip and adventure together with your important gadget, very organize and spot it within seconds and easy to carry too, your device will perfectly fit inside ad our protective and specialized storage just for your device.

User questions & answers

Question:	Hi, can you mount the transistor in side the kayak
Answer:	I usually fix the transducer on the hull of the kayak (the outside). Because the transducer can only be working when it touches the water.
Question:	is the fish finder waterproof, meaning if it falls into the water will it still work
Answer:	No it's not waterproof.
Question:	Is there a longer cable or extension
Answer:	Not yet
Question:	How long does the battery last
Answer:	According to my experience, you can use it for about 4 hours continuously If you put in brand new batteries

Product features

Features:

1. Sonar beam: 200KHz sonar beam with stable signal, effectively prevent signal disturbance.
2. Fish alarm: Allow you to instantly capture the fish without watching the float for a long time.
3. Selectable sensitivity: Easy to select the information of fish according to your different needs.
4. Powerful functions: Battery save mode, Fish depth scale and fish size distinguish, Parameter setting memory
5. Underwater structure displays: Deliver the information and environment of beneath the surface and help identify fish targets.

Ice Fishing

1. You should clear the snow on the ice layer. Make sure the surface is smooth enough. Put the fish finder portable directly on ice layer to detect fish distribution in purpose of selecting a place to drill a hole.
2. There should be no air between the sensor and the ice and no air between ice layer and the underwater either. Otherwise, the portable fish finder will not work properly.
3. Cut a hole through the ice and put the fishing sonar sensor directly in the water. Enjoy the fishing gear

Kayak Fishing

1. Attach the Side-Scan Adapter to the boat hull using the mounting tabs.
2. Break though the hull of a boat. Place the fishing sonar sensor against the hull bottom 1 inch underwater.
3. The moving speed of kayak should be below 5mph.

River Fishing

1. Place the transducer and float in your hand, and toss underhand.
2. Use a pole to guide the transducer to a desirable position.
3. Add a float kit on the cable to allow the cable to float on top of the water.
4. Neatly wind up the excess cable.

Shore Fishing

1. Fixed the removable float on the cable.
2. Cast the fishing sonar transducer into water as far as you can.
3. You can cast the fishing sonar transducer either by your hand or by the fishing rod.

Attention:

1. It will turn off automatically if the depth display reads "---" continuously for 5 minutes.
2. The transmitter is waterproof, but the receiver (unit with screen) is not waterproof, so please do not submerge or spray the fish finder screen with water.
3. It can not be used to detect bait fish(motionless) or fish that is smaller than 10cm.
4. When use this fish finder on moving boat, please make sure the moving speed is slowly (lower than 5 mph).
5. Extremely cold weather will impact the performance of the product. It is suggested that you keep the unit in temperatures above 0 degrees during operation.
6. Strong waves, suspended matter and muddy water,will affect the performance.

Package Included :

1. Fish Finder Display
2. Sonar Sensor (Transducer) with 25ft cable
3. Removable Transducer Float with Rubber Stopper
4. Transducer Side-Scan Adapter
5. Stainless Bolt and Wing Nut
6. Neck Strap
7. Operation Manual
8. Hard Travel Case

Product description

Humminbird Helix 7 Fishfinder. The 7", ultra-wide display gives you ample room to view the many pre-loaded split screen view options. New to HELIX 7- Mega Down Imaging: Get unprecedented underwater clarity with coverage down to 125 feet below your boat. You'll unlock new details with up to 3x more output than standard Down Imaging sonar. Dual Spectrum CHIRP: Before you cast, know what's down there thanks to long, well-defined fish arches, and a clear view of fish-holding structure and the bottom. Powered by our proprietary, Low Q CHIRP transducer, Dual Spectrum offers two ways to search: wide mode for maximum coverage and narrow mode for maximum detail. Switchfire sonar: take command of how your sonar returns appear. With two display modes, you can add or remove detail, account for water depth, temperature and turbulence, even watch lure presentations - all at the push of a button. Lakemaster compatible: upgrade to the unrivaled accuracy and detail of Humminbird LakeMaster maps. From easy-to-read contours, to highlighted depth ranges, to scrollable lake lists, you'll have all the tools you need to make every moment count. Includes transducer and mounting hardware, power cable, gimbal mounting bracket.

• 7-Inch screen with 800H x 480V resolution color TFT display
• MEGA Down Imaging: Get unprecedented underwater clarity with coverage down to 125 feet below your boat. Not a Minn Kota i-Pilot Link Compatible
• Powered by our proprietary, Low Q CHIRP transducer, Dual Spectrum CHIRP offers two ways to search: wide mode for maximum coverage and narrow mode for maximum detail
• With two display modes, you can add or remove detail, account for water depth, temperature and turbulence, even watch lure presentations
• Includes transducer and mounting hardware, power cable and gimbal mounting bracket.Watts RMS: 500

User questions & answers

Question:	Do they all helix 7's have the same transducer? i am wondering if i wanted to upgrade my power head if i need to install another transducer
Answer:	I have used my MEGA G-3 unit with the transducer that came with my G-2 unit. It works fine but needs to be identified in the settings. I have also used it with he transducer that came with the MEGA G-3 unit. It has what they call MEGA capabilities which do improve the image quality some.
Question:	Is it possible to use this unit in Japan
Answer:	I doubt it, Japanese fish are to stealthy.
Question:	what's the difference between G2N and G
Answer:	G3 in the latest model. G2n has networking capabilities with other g2n humminbirds.
Question:	Does this unit have the gps,says it does but didn't mention it under description
Answer:	Yes, this unit does include GPS. Humminbird HELIX 7 G3 - CHIRP MEGA DI Fishfinder/GPS Combo w/ Transom Mount Transducer

• 【Fishes and Contour Readout】The fish finder portable detects and displays water depth, approximate fish location, fish size, short & tall weeds, sand & rocks on bottom.
• 【Suitable for Various Fishing Ways】It can be used for off shore fishing, kayak fishing, ice fishing, lake fishing, sea fishing , river fishing, and so on. It will be one of your best fishing accessories.
• 【Depth Readout】 The fish finder portable detector range is in a 45°cone underwater. The detection of depth range is from 3ft(1m) to 328ft (100m) below fishing sonar transducer. The fishing sonar sensor is with 25 ft cable and removable transducer float. Water depth shows by meters/feet.
• 【Powerful Functions】5 modes sensitivity options; battery save mode; backlight mode; fish alarm; unit of measure. Normally fishing depth finder supports 4-5 hours continuous working with brand new batteries. Open battery save mode can be working even longer.
• 【Package Included】1. Fish Finder Display 2. Sonar Sensor (Transducer) with 25ft cable 3. Removable Transducer Float with Rubber Stopper 4.Transducer Side-Scan Adapter 5. Stainless Bolt and Wing Nut 6.Neck Strap 7.Operation Manual.

Product features

RICANK Portable Fish Finder

RICANK Portable Fish Finder This portable fish finder is suitable for ice fishing, kayak fishing, shore fishing and sea fishing. It is one of the best fishing kayak accessories to your friends or family members. It detects and displays water depth, approximate fish location, weeds and rocks on seabed. They will be surpised of how many fishes they get by this fish finder.

Features:

1. Sonar beam: 200KHz sonar beam with stable signal, effectively prevent signal disturbance.
2. Fish alarm: Allow you to instantly capture the fish without watching the float for a long time.
3. Selectable sensitivity: Easy to select the information of fish according to your different needs.
4. Powerful functions: Battery save mode, Fish depth scale and parameter setting memory
5. Underwater structure displays: Deliver the information and environment of beneath the surface and help identify fish targets.

Ice Fishing

1. You should clear the snow on the ice layer. Make sure the surface is smooth enough. Put the fish finder portable directly on ice layer to detect fish distribution in purpose of selecting a place to drill a hole.
2. There should be no air between the sensor and the ice and no air between ice layer and the underwater either. Otherwise, the portable fish finder will not work properly.
3. Cut a hole through the ice and put the fishing sonar sensor directly in the water. Enjoy the fishing gear

Kayak Fishing

1. Attach the Side-Scan Adapter to the boat hull using the mounting tabs.
2. Break though the hull of a boat. Place the fishing sonar sensor against the hull bottom 1 inch underwater.
3. The moving speed of kayak should be below 5mph.

River Fishing

1. Place the transducer and float in your hand, and toss underhand.
2. Use a pole to guide the transducer to a desirable position.
3. Add a float kit on the cable to allow the cable to float on top of the water.
4. Neatly wind up the excess cable.

Shore Fishing

1. Fixed the removable float on the cable.
2. Cast the fishing sonar transducer into water as far as you can.
3. You can cast the fishing sonar transducer either by your hand or by the fishing rod.

Attention:

1. It will turn off automatically if the depth display reads "---" continuously for 5 minutes.
2. The transmitter is waterproof, but the receiver (unit with screen) is not waterproof, so please do not submerge or spray the fish finder screen with water.
3. It can not be used to detect bait fish(motionless) or fish that is smaller than 10cm.
4. When use this fish finder on moving boat, please make sure the moving speed is slowly (lower than 5 mph).
5. Extremely cold weather will impact the performance of the product. It is suggested that you keep the unit in temperatures above 0 degrees during operation.
6. Strong waves, suspended matter and muddy water,will affect the performance.

Package Included :

1. Fish Finder Display
2. Sonar Sensor (Transducer) with 25ft cable
3. Removable Transducer Float with Rubber Stopper
4. Transducer Side-Scan Adapter
5. Stainless Bolt and Wing Nut
6. Neck Strap
7. Operation Manual

• Lucky New Arrival Fishing Fish Finders: This portable fish finders detects and shows fish location with water depth, short & tall weeds, sand & rocks. The color LCD display of the kayak fish finder is visible under sunshine. Backlight enable the fishing sonar for night fishing.
• Muti Functional Fish Finders: Five assistant settings are available on this portable fish finders. Adjustable sensitivity; battery save mode; backlight mode; fish and fish school alarm and battery indicator.
• Detecting Depth: The portable fish finders works with wired transducer with a 25ft cable wire. The detecting depth range of the fishing sonar is from 3ft(1m) to 328ft (100m) with 45°detecting degree. The depth unit can be switched from “M” to “FT” if long press enter button for 5 seconds.
• Long Working Time Fishing Fish Finder: This portable depth finder uses 4 AAA batteries. Normally this fish finders for kayaks can continue working for 4-5hours with brand new batteries. If you select battery saving mode, the kayak fish finder will keep working more time.
• Wide Applications Portable Depth Finder: This fish finder for kayaks is designed to be omnipotent. You can use this portable depth finder for various fishing occasions like boat fishing, kayak fishing, sea fishing, ice fishing and so on.

User questions & answers

Question:	Is it able to detect the thermocline
Answer:	No, the portable fish finders are unable to detect the thermocline.
Question:	Will it detect a single fish or does it have to be more than one to be detected
Answer:	I will detect a single fish, but it may look like multiple fish as they scroll to the left.
Question:	What is the accuracy of fish By that I mean. Has anyone actually had proof that there were fish down where it said there were
Answer:	It tells me all the time that there's fish around but I don't ever get a bite
Question:	does this detect your lure as its going down
Answer:	Hello, this fish finder detects by reflection of sound waves. If your lure is within the detection range, when the sound wave encounters it, the display screen can indicate the depth of the water layer where it is. Hope this helps.

Product description

The STRIKER Plus 7sv fishfinder with a bright 7” display and built-in GPS features Garmin Quickdraw Contours map drawing software, which stores up to 2 million acres of content with 1’ contours. Garmin CHIRP traditional sonar provides crystal-clear images with remarkable target separation. Get nearly photographic images of what passes below and beside your boat with CHIRP ClearVü and CHIRP SideVü scanning sonars. Use built-in Wi-Fi to pair with the ActiveCaptain app for smart notifications, access to Quickdraw Contours Community data and more. Includes Garmin's protective cover.

• Includes transducer for built-in Garmin CHIRP traditional sonar plus CHIRP ClearVü scanning sonar
• Built-in Garmin quickdraw contours mapping software lets you create and store maps with 1’ contours for up to 2 million acres
• Built-in Wi-Fi for access to ActiveCaptain app so you can receive smart notifications, access Quickdraw Contours Community and transfer waypoints and software update notifications
• Built-in GPS lets you mark waypoints, create routes and view boat’s speed
• Bright, Sunlight-readable 7” display and intuitive user interface

User questions & answers

Question:	Does the provided mounting hardware tilt and swivel 360 degrees
Answer:	Not this unit
Question:	Does it come with mounting hardware and have trolling motor mount
Answer:	Mine is hooked to a deep cycle marine battery that is charged by the boat motor. As for what comes in the box, you get the head unit, transducer, wiring harness and mounting bracket.
Question:	Is it possible to install steadycast heading sensor to this
Answer:	Yes
Question:	How deep will the sonar reach
Answer:	Pretty sure this model doesn’t have maps, u can only write your own
Question:	Does it have inland lake maps
Answer:	I believe that it is.
Question:	what type of battery do you use? What comes in the box
Answer:	It does. Both halves of the YakAttack ParkNPole Link will float independently from each other as well as when assembled.
Question:	Does it have a swivel mount
Answer:	7/8"
Question:	How can I update maps
Answer:	You could use it for that if it reaches the bottom. It’s main use is a push rod while standing. I use it as a anchor spot at times. I’ve seen people push it through the drain plugs also