14 best depth and fish finder

Product description

The striker Plus 5cv Fishfinder with a bright 5” display and built-in GPS features Garmin CHIRP traditional sonar, Garmin CHIRP Clearly scanning sonar and Quickdraw Contours map drawing software, which stores up to 2 million acres of content with 1’ contours. The built-in GPS lets you mark and navigate to waypoints and shows your boat's speed.

• Includes transducer for built-in Garmin CHIRP traditional sonar plus CHIRP ClearVü scanning sonar
• Built-in Garmin Quickdraw Contours mapping software lets you create and store maps with 1’ contours for up to 2 million acres
• Built-in GPS lets you mark waypoints, create routes and view boat’s speed. Frequencies supported : Traditional: 50/77/200 kHz
• Bright, sunlight-readable 5” display and intuitive user interface
• Rugged design for every fishing environment. Display resolution: 800 x 480 pixels

User questions & answers

Question:	How long is the cord from the transducer to the unit itself
Answer:	On my Sun TRACKER 16 foot easily reaches from the battery to the display. Transponder on the front reaches to the counsel.
Question:	Does this gps have a chip slot
Answer:	No again you need too buy a different model....
Question:	Will this work on a Kayak, will the transducer fit through the scupper holds
Answer:	You only need to run the transducer wire and plug up through your scupper hole to and plug it into the back of the unit. No need to fit transducer through scupper.
Question:	Con que accesorios viene este gps
Answer:	transductor y kit de instalacion

Product features

Garmin Striker Plus 5cv with Transducer, 5" GPS Fishfinder

The STRIKER Plus 5cv fishfinder with a bright 5” display and built-in GPS features Garmin CHIRP traditional sonar, Garmin CHIRP ClearVü scanning sonar and Quickdraw Contours map drawing software, which stores up to 2 million acres of content with 1’ contours. The built-in GPS lets you mark and navigate to waypoints and shows your boat’s speed.

Garmin Quickdraw Contours

Nobody knows the waters you fish better than you and your fellow fishermen. While you are trolling the shorelines and the depths, Quickdraw Contours mapping software creates HD fishing maps of the places you’ve been. No special knowledge is required.

Product description

The worlds easiest fish finder, HOOK2-4x Bullet offers simple menus, easy access to key functions and Auto tuning sonar Powered by proven Lawrence performance, HOOK2-4x features wide-angle, Broadband sonar coverage Just plug it in and fish Yes, it's that easy

• EASY TO USE: The Lowrance HOOK2 4x Fish Finder features auto-tuning sonar and phone-like menus giving you more time to spend fishing and less time dealing with settings.
• WIDER SONAR COVERAGE: The HOOK2 4x offers a wide-angle sonar cone giving you double the coverage of traditional fish finders.
• EASY SETUP: A single transducer can be mounted on the transom, inside the hull, on the trolling motor or through a scupper hole.
• TRANSDUCER INCLUDED: The included Bullet Skimmer transducer gives you traditional 2-D sonar (fish arch) views.

User questions & answers

Question:	Does it do well on pontoon boats
Answer:	Thank you for your inquiry. The Hook2 4X unit will work well on a pontoon boat. You can contact us at [email protected] for mounting tips. We will be happy to assist you.
Question:	Does this come with a cover
Answer:	My unit didn't come with a cover .
Question:	Hola Mide la profundidad en metros
Answer:	Thank you for your inquiry. The Hook2 4X does have the ability to change the units of measure to meters instead of feet. We hope this information is helpful.
Question:	Does it record
Answer:	To my knowledge it does not record

Product features

Solarmax Display

Get crisp and clear views of fish and fish-holding structure with the excellent clarity and daylight visibility of a high-resolution Solarmax display.

Autotuning Sonar Settings

You will spend more time fishing and less time dialing in your sonar with HOOK2 Autotuning sonar. Just plug it in and fish. It doesn't get any easier.

Built-In Mapping*

Easily find depth changes, roadbeds or your favorite fishing spot on the built-in, high-detail U.S. map in HOOK2, featuring 1-foot contours or more than 3,000 lakes.

*Not available on X models.

Micro SD Slot*

Save your waypoints, routes and trails to a microSD card or upgrade your mapping with an optional chart card.

*Not available on X models.

Product description

Humminbird Helix 7 Fishfinder. The 7", ultra-wide display gives you ample room to view the many pre-loaded split screen view options. New to HELIX 7- Mega Down Imaging: Get unprecedented underwater clarity with coverage down to 125 feet below your boat. You'll unlock new details with up to 3x more output than standard Down Imaging sonar. Dual Spectrum CHIRP: Before you cast, know what's down there thanks to long, well-defined fish arches, and a clear view of fish-holding structure and the bottom. Powered by our proprietary, Low Q CHIRP transducer, Dual Spectrum offers two ways to search: wide mode for maximum coverage and narrow mode for maximum detail. Switchfire sonar: take command of how your sonar returns appear. With two display modes, you can add or remove detail, account for water depth, temperature and turbulence, even watch lure presentations - all at the push of a button. Lakemaster compatible: upgrade to the unrivaled accuracy and detail of Humminbird LakeMaster maps. From easy-to-read contours, to highlighted depth ranges, to scrollable lake lists, you'll have all the tools you need to make every moment count. Includes transducer and mounting hardware, power cable, gimbal mounting bracket.

• 7-Inch screen with 800H x 480V resolution color TFT display
• MEGA Down Imaging: Get unprecedented underwater clarity with coverage down to 125 feet below your boat. Not a Minn Kota i-Pilot Link Compatible
• Powered by our proprietary, Low Q CHIRP transducer, Dual Spectrum CHIRP offers two ways to search: wide mode for maximum coverage and narrow mode for maximum detail
• With two display modes, you can add or remove detail, account for water depth, temperature and turbulence, even watch lure presentations
• Includes transducer and mounting hardware, power cable and gimbal mounting bracket.Watts RMS: 500

User questions & answers

Question:	Do they all helix 7's have the same transducer? i am wondering if i wanted to upgrade my power head if i need to install another transducer
Answer:	I have used my MEGA G-3 unit with the transducer that came with my G-2 unit. It works fine but needs to be identified in the settings. I have also used it with he transducer that came with the MEGA G-3 unit. It has what they call MEGA capabilities which do improve the image quality some.
Question:	Is it possible to use this unit in Japan
Answer:	I doubt it, Japanese fish are to stealthy.
Question:	what's the difference between G2N and G
Answer:	G3 in the latest model. G2n has networking capabilities with other g2n humminbirds.
Question:	Does this unit have the gps,says it does but didn't mention it under description
Answer:	Yes, this unit does include GPS. Humminbird HELIX 7 G3 - CHIRP MEGA DI Fishfinder/GPS Combo w/ Transom Mount Transducer

Product description

Following in the success of the Striker fish finder series, Garmin is proud to announce the new Striker fish finders with ClearVu technology. These devices are designed to allow you to mark your favorite fishing spot and easily navigate back to it tomorrow, saving you time and money. Striker series fish finders are available in 3.5-, 5- and 7-inch display sizes. Display resolution: 480 x 320 pixels.

• Clear Vu scanning Sonar shows you more of what is in the water around your boat; This high frequency sonar gives near photographic images with detailed representations of objects, structure and fish
• The power of simple offers a keyed interface with dedicated buttons; The device is easy to use and easy to install; Available in 3.5, 5 and 7 inch display sizes; Water rating IPX7
• Waypoint map: Use the way point map to easily view, mark and navigate to locations such as brush piles, stumps and docks; Maximum depth 1,600 feet freshwater, 750 feet saltwater; Current draw at 12 volt: 0.23 Ampere
• Chirp Sonar sends a continuous sweep of frequencies which provides a wider range of information; Chirp Sonar is able to create crisper fish arches with better target separation
• Built in flasher: View your sonar data in the classic flasher format; Ideal for ice fishing or vertical jigging. Display size: 1.9 x 2.9 inches (4.9 x 7.3 centimeter); 3.5 inches diagonal (8.7 centimeter)

User questions & answers

Question:	Does this come with a transducer
Answer:	Yes mine came with a transducer. It came with everything needed to set up and be ready to go as if you never had a fish finder before. Although the two wire clamps to hold your cable for the transducer are fragile, I recommend getting new ones
Question:	Does this unit also give depth readings of the water
Answer:	Yes! Depth, temperature, speed you're moving, time of day etc. this is an awesome unit for the price
Question:	does the power source (12 volt i've read) come with the package, or do i need to purchase that
Answer:	Yes you can and I have done just that. You can get it all here on Amazon. There are plenty info doing just this on the internet. Just assemble these parts. Here is what I have. When done I have it mounted via Scotty #141 Kayak/SUP Transducer Mounting Arm with Gear-Head https://www.amazon.com/gp/product/B0174X6T5A/ref=oh_aui_search_detailpage?ie=UTF8&psc=1 Battery is https://www.amazon.com/gp/product/B006LO9XHA/ref=oh_aui_search_detailpage?ie=UTF8&psc=1 The box it fits in is https://www.amazon.com/gp/product/B011ZB4NLO/ref=oh_aui_search_detailpage?ie=UTF8&psc=1 Switch is https://www.amazon.com/gp/product/B011ZB4NLO/ref=oh_aui_search_detailpage?ie=UTF8&psc=1 Uxcell a12110200ux0689 Waterproof Connector Cable Gland is https://www.amazon.com/gp/product/B00AOBGQ26/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
Question:	Does it has map of Middle East Kuwait
Answer:	yes but its top secret

Product features

STRIKER 4

3.5-inch CHIRP Fishfinder with GPS.

Navigate Easily with Waypoint Map

Since the STRIKER fishfinder series includes high-sensitivity GPS, you can see your position in relation to waypoints you have marked. Use the waypoint map to easily view, mark and navigate to locations such as brush piles, stumps and docks. It’s also a great tool for finding your way back to the boat ramp.

Check Your Speed on Screen

You can quickly and easily see your boat’s speed on the screen of your STRIKER fishfinder. It’s a great tool to make sure you are trolling at the right speed for the lure you’re using and for a particular fish species. It’s also a good way to tell if you are going the right speed in wake-controlled areas.

Take Your Fishfinder Anywhere

A portable kit is available to protect and carry your STRIKER fishfinder with GPS, so it’s perfect for kayak, canoe or ice fishing. It includes a sealed, rechargeable battery with charger, built-in transducer cable management and storage and suction cup transducer mount and float.

Experience the Clarity of CHIRP

STRIKER 4 fishfinder includes a Garmin CHIRP (77/200 kHz) transducer, which provides a visibly higher level of clarity and detail for fish and structure than traditional 77/200 kHz transducers.

Instead of sending just 1 single frequency, CHIRP sends a continuous sweep of frequencies, ranging from low to high, then interprets them individually upon their return. Since the frequencies provide a wider range of information, CHIRP sonar technology can create crisper fish arches with greater target separation.

You also can upgrade to high-performance Garmin CHIRP technology, which provides crystal-clear sonar images with even more remarkable target separation and resolution from shallow to deeper depths. For better fishing, bottom contours are more visible, even at higher speeds, and signal noise can be suppressed at greater depths to provide a more timely interpretation of what’s below.

Product description

At Hummingbird, innovation is the core of everything we do. The new HELIX Series is no exception-delivering our full array of technologies, including the intuitive REFLEX interface, precise Broadband CHIRP, incredible Imaging SONAR and the mapmaking power of Auto Chart Live. Fueled by DNA that is unmistakably Hummingbird, the HELIX Series also features a jaw-dropping industrial design. From top to bottom, it's plain to see that finding fish runs in this family. HELIX 5 CHIRP GPS G2 HELIX 5 Series 410210-1 ​The HELIX 5 CHIRP GPS G2 with our new user interface and operating system, features ​a brilliant 800H x 480V, 5" 256 color display with backlight. CHIRP Dual Beam PLUS sonar with 4000 watts PTP power output, Precision Internal GPS Chart plotting with built-in Anima cartography with a micro SD card slot for optional maps or for saving waypoints. Maximize your angling experience with the Hummingbird HELIX 5 CHIRP GPS G2 fish finder system. ​CHIRP Frequencies (Out of Box Transducer)83 kHz:  75-95 kHz200 kHz:  175-225 kHzMaximum Depth:  1500 feetCHIRP Frequencies (Optional Purchase Transducer)Low: 28-75 kHzMed: 75-155 kHzHigh: 130-250 kHz83/200: 75-155/130-25050/200: 28-75/130-250Maximum Depth:  2500 feet

• 5-Inch Color WVGA Display
• CHIRP Dual Beam PLUS Sonar. Power Output RMS : 500 Watts. Power Draw : 615 mA
• Precision Internal GPS Chart plotting with built-in Anima cartography
• Micro SD card slot for optional maps or for saving waypoints
• Target Separation - 2.5 Inches

User questions & answers

Question:	Does this come with a screen cover
Answer:	No it doesn't come with a screen cover.
Question:	This shows that smart strike is included with this unit. Where do I find that option
Answer:	Go to the hummingbird web site or contact the help site by phone
Question:	what is a SD card? where do you get them? and why do i want one
Answer:	SD card is the same card you used in camera a few years back. they store information and slide into a slot on many things like computers and fish finders. they are about 3/4 inches by 1 inch in size and costs about $10.
Question:	How long is the transducer cable? I want to put this on my 20 ft pontoon boat
Answer:	I don't know the specific length, you would need to check the specifications or with the manufacturer. I did install it on my 21' pontoon and it was just long enough to reach the console mounted unit.

Product features

Humminbird HELIX 5 G2 Series Fish Finders

There’s no such thing as 'too early' or 'too far.' High expectations go with the territory. The HELIX 5 Series answers the call with an uncompromising widescreen color display. Available on select models, Humminbird CHIRP Digital Sonar and Imaging Sonar reveal the lake bottom, while GPS mapping, AutoChart Live and Humminbird Basemap show you the way.

Feature for feature, it has what it takes to win the day. Do you? No doubt.

Includes transducer and mounting hardware, power cable and gimbal mounting bracket.

2D Sonar

If your goal is to locate and see fish more clearly, start here. Humminbird’s 2D sonar offerings are far from two-dimensional. Whether you’re fishing freshwater lakes, coastal waters or the ice, you’ll find the right solution for your environment and prey.

SwitchFire

SwitchFire lets you control the way your returns appear. With two display modes—Max Mode and Clear Mode—you can choose how much detail, including fish, structure and thermoclines, you want to see or un-see.

Dual Beam

With a wide beam for more search area or a narrow beam for more precision, DualBeam shows you fish and the bottom. DualBeam Plus lets you combine the two beams for even more detail.

Digital CHIRP

CHIRP stands for 'Compressed High Intensity Radar Pulse.' That’s a fancy way of saying it can show you fish that other forms of 2D sonar can’t. How’s that? CHIRP scans the water for fish similar to the way the seek function on your truck’s radio scans the airwaves for FM stations. By covering a wide range of frequencies, CHIRP produces more accurate, more detailed returns of fish, structure and the bottom.

Imaging - It's all in the details

Amazing Humminbird Imaging sonar shoots high-frequency beams below the surface to reveal structure, cover and contours with crystal clarity.

Side Imaging - Nowhere to Hide

Gain an unprecedented, side-to-side perspective on the world below the surface with Side Imaging. In an instant, the ultra-thin beam scans the area to the left and right of your boat location. The return image for each slice is then added to the images taken immediately before and after to build an incredible view of the lake bottom. (image displays MEGA Side Imaging)

Down Imaging - Look Out Below

Get a fish-eye’s view of what’s happening below your boat with Down Imaging. These incredible images are created with high-frequency sound waves emitted in ultra-thin slices. The sonar returns from these waves produce a 'portrait.' As you patrol the water, you’ll watch timber, brush, bridge pilings, rocks and any other structure pop with stunning detail. (image displays MEGA Down Imaging)

Built-In Basemap - Ready to fish, right out of the box

We’ve enhanced our standard Basemap to deliver more detail and a superior angling experience. The Humminbird Basemap is built into all SOLIX Series and GPS-equipped HELIX Series G2/G2N models. Based on freshwater data from LakeMaster and NOAA, the most-trusted saltwater source, these accurate maps provide you with a clear view of underwater terrain. Identify buoys, daymarkers, hazards, marinas and countless other navigation aids and points of interest with our comprehensive icon system. You’ll also see contours, depth markings and, for coastal areas, spot soundings. On the water, confidence is key. And the Humminbird Basemap delivers.

Autochart Live - Create your map-sterpiece (On select models)

Build richly detailed maps of your favorite fishing spots in real time with Humminbird AutoChart Live, available on the SOLIX Series and all GPS-equipped HELIX Series models. Map the water as you drive the boat, with eight hours of built-in recording time. Once your map is live, view it with vegetation, bottom hardness and depth contours to locate the best fish-holding areas. Also, use it with i-Pilot Link Follow and other patented Humminbird LakeMaster features. The future of digital charting has arrived. Better get on board.

Navigation - Built-In GPS

Get unparalleled GPS technology out of the box. Many Humminbird fishfinders have our powerful Precision GPS/WAAS receiver built right in and provides fast position fixes accurate within 2.5 meters. For those models without it, there are several options: Add the Humminbird Precision GPS/WAAS receiver for permanent GPS capability on your boat. Use Humminbird’s adapter and the NMEA output on your own handheld GPS unit, or use Humminbird’s InterLink to allow two fishfinders to access one GPS receiver.

• ◆ Fishes and bottom contour readout: LUCKY fish finder portable detects and displays water depth, approximate fish location, short & tall weeds, sand & rocks on bottom. Fish finder portable design gives you another option to hang it around neck.
• ◆ The kayak fish finder suits for variety fishes fishing environments: It can be used for off shore fishing, kayak fishing, ice fishing, lake fishing, sea fishing and so on. You can also use handheld fish finder on the moving kayak with speed below 5mph.
• ◆Depth readout: The fish finder portable detector range is in a 45°cone underwater. The detection of depth range is from 3ft(1m) to 328ft (100m) below fishing sonar transducer. The water depth can be shown either in feet or meter. The fishing sonar sensor is with 25 ft cable and removable transducer float.
• ◆ Small portable fish finder with powerful functions: 5 modes sensitivity options; battery save mode; backlight mode; fish and fish school alarm. Normally fishing depth finder supports 4-5 hours continuous working with brand new batteries. Open battery save mode can be working even longer.
• ◆ Warranty Policy: We offer 12 months warranty for LUCKY fish finder portable. It will be one of your best fishing kayak accessories. Any questions before or after purchase, please feel free to contact us via Amazon message (response within 24 hours every day online).

User questions & answers

Question:	Please i need a trasceduser cable replacement. How much will it cost me
Answer:	no, you will need a big one. Jack-Hammer would be best.
Question:	It works in salt water
Answer:	I'am not sure about basalt rock but to give you a example it was slow braking 8" concreat but did the job.I have used it on many projects it works very well.
Question:	can you mount the transistor in side the kayak
Answer:	If it is a steel rod, then most likely. This thing will easily break rocks. You will need some kind of driver bit to fit it. If the rod is very long it may be difficult to lift the tool above the rod to get it started.
Question:	Does it work well for ice fishing
Answer:	Some type of cast metal, not plastic.

Product features

Function

• Well understand the water depth and fish location by the portable fish finder.
• The fish finder portable gives you alerts when fish and fish schools passing by.
• 5 modes sensitivity options enable you to use the kayak fish finder in different fishing environments.
• The kayak fish finder can be used in different ways, such as on ice, fixed to kayak, put it into a hole or float it on water surface.
• You can understand the composition of the bottom contour. Sands, rocks and weeks will be shown on the LCD display.

Specification

• 2inch TN/ANTI-UV LCD Display.
• Blue LED Back lighting.
• Measurement Unit: FT/M
• 1.81inch diameter transducer sensor.
• Detect Depth Range: 3ft~328.08ft (0.6m~100m) under sensor.
• Sensor coverage range: 45 degrees beam angle in 200Khz.
• Sensor Operating Temperature: 14°F to 122°F(-10°C-50°C) .
• Cable Length: 25ft (7.62m)
• Powered by: 4 x AAA batteries (not included)

For Kayak Fishing

1. Attach the Side-Scan Adapter to the boat hull using the mounting tabs.
2. Break though the hull of a boat. Place the fishing sonar sensor against the hull bottom 1 inch underwater.
3. The moving speed of kayak should be below 5mph.

For Ice Fishing

1. You should clear the snow on the ice layer. Make sure the surface is smooth enough. Put the LUCKY fish finder portable directly on ice layer to detect fish distribution in purpose of selecting a place to drill a hole.
2. There should be no air between the sensor and the ice and no air between ice layer and the underwater either. Otherwise, the portable fish finder will not work properly.
3. Cut a hole through the ice and put the fishing sonar sensor directly in the water. Enjoy the fishing gear

For Shore Fishing

1. Fixed the removable float on the cable.
2. Cast the fishing sonar transducer into water as far as you can.
3. You can cast the fishing sonar transducer either by your hand or by the fishing rod.

• 【Fishes and Contour Readout】The ice fish finder portable detects and displays water depth, fish group，fish size, temperature. The depth data will be updated four times per second at a depth of 2.5 to 300 feet (0.8 to 90 meters).
• 【Suitable for Various Fishing Ways】It can be used for off shore fishing, kayak fishing, ice fishing, lake fishing, sea fishing , river fishing, and so on. It will be one of your best fishing accessories.
• 【Water Resistance and Durable】 Water Resistance, durable and rugged, the water-resistant construction withstands splashing. It is 100 feet (30 meters) waterproof, allowing you to use it as a range finder or target for snorkeling or diving.
• 【Attracting Fish Lamp】 The depth finder has a two-color lure fish lamp,the default is on. Slide the switch twice quickly can turn on and off the lights. The attracting fish lamp only work on some of the light sensitive fish.
• 【Perfect Gift for Fishing Enthusiast】: This portable fish finder is designed stylish and lightweight, the small size is perfect for fishing. It is the perfect gift for the friend or family member that loves fishing and the outdoors!

User questions & answers

Question:	Is it possible to have a read out in feet instead of meters
Answer:	Yes! The unit can be switched. You can pull the switch and hold for 5s, until the current units of measure blink, release the switch. It’s very easy.
Question:	What is its detectable depth range
Answer:	In standard environment, it's from 0.8 - 90m (2.6 - 295ft). This fish finder is very functional and portable. I am satisfied with this purchase.
Question:	Is it possible to read depth from solid ice
Answer:	Yes, you can. The device has advanced sonar capabilities and can read depth from solid ice.
Question:	I wonder how many manifestations of fish will be in the display
Answer:	Hi, it will display 3 types: small fish, big fish and fish group.

Product features

RICANK Ice Fish Finder

Who We Are

RICANK focus on creating wonderful experience.

Our mission：We can keep youth.

Why Choose RICANK Ice Fish Finder?

RICANK Ice Fish Finder is designed for the fishing lovers. The unit can be used in rivers, lakes,or sea.

It uses sonar to locate and define structure,bottom contour and composition, as well depth directly below the transducer.

The transducer sends a sound wave signal and determines distance by measuring the time.

How to Use

1.Clear the snow and expose the ice.

2.Put a small amount of liquid water on the ice and put the sonar sensors on the water .

3.Start the depth detection function.

4.Place the product vertically above the water to get the correct depth reading.

5.After getting the correct reading, move the product around in a scanning manner (similar to using a flashlight). Obtain depth readings while side - scanning sonar. Signal must point to a solid surface within 300 feet (90 meters) to work normally. You need to aim the device at the bottom of the range.

Depth Model

1. Put the sonar sensor side into the water.Use your hand to position the product vertically on the water, otherwise reading will be inaccurate.

2. Turn the toggle switch on the fish finder.

3. Display current depth.

•when the fish finder is in depth mode, the depth data will be updated four times per second at a depth of 2.5 to 300 feet (0.8 to 90 meters).

•If the probe can't get an accurate depth reading, or off the water, "- - -" will show up.

4.If the correct reading is not obtained, the device will automatically shut down after 30 seconds.

Switching The Reads

1. Turn the unit on by sliding the switch towards the battery compartment and releasing.

2. Slide the switch towards the battery compartment and hold for 5 seconds.

3. The current units of measure will blink, release the switch

4. Pull and release the switch to change between the settings (FT/ F M/C)

5. No action for 10 seconds, save the last setting (depth or temperature) and exit the unit setting.

Product description

PIRANHAMAX 4 - Sharper image. Sharper teeth. With modern styling and large, 4.3" color LCD, the new MAX 4 will give you a fresh perspective on what’s below your boat. Thanks to a redesigned, even easier-to-use interface, unlocking the power of optional Down Imaging, Fish ID+, fish alarms, depth alarms and zoom has never been simpler. Feature for feature, it packs a technological chomp that no fish finder in its class can match.



​​FEATURES: Dual Beam Sonar: Choose from a narrow and a wide beam for great detail or a generous coverage area, helping you identify fish, structure and contours. Down Imaging: Get a clear view of what's happening below your boat with Down Imaging. As you patrol the water, you'll watch timber, brush, bridge pilings, rocks and any other structure pop with great detail.

Tilt and Swivel Mount: Quickly adjust your viewing area angle.

SPECIFICATIONS:

• Display Size Diagonal - 4.3"  

• Display Pixel Matrix - 480 V x 272 H  

• Unit Size - 3.9" W x 6.8" H x 3.6" D  

• Display Color Grayscale - 256 colors  

• Sonar Standards - Dual Frequency and Down Imaging (DI model only)  

• Target Separation - 2.5"  

• Power Output RMS - 300 Watts  

• Power Output Peak-to-Peak - 2,400 Watts  

• Depth Capability - 320' (DI) & 600'

• Display Size Diagonal - 4.3-Inch
• Dual Beam Sonar
• 2400 watts PTP/300 Watts RMS
• Depth Sonar 320 ft (20) 455 kHz, 600 ft (20) 200 kHz
• Sonar Coverage 28° & 16° @ -10dB

User questions & answers

Question:	Does the unit turn left/right on it's mount as well as up and down
Answer:	i had to change the mount set up alittle but yes i got mine to spin about 180 degrees
Question:	Can i confirm the meaning of inside hull or transom? does inside hull mean it can be mounted amidships through hull
Answer:	This is for Kayak users. Inside Hull of Kayak or transom mounted outside.
Question:	Is the humminbird 410150-1 water proof
Answer:	Yes. Fishing in Central Florida it seems it is getting wet all the time. Go for it. . . . .
Question:	Does this come with transducer
Answer:	Yes :) Flush Mount transducer, 20’
Question:	Please i need a trasceduser cable replacement. How much will it cost me
Answer:	Usually we didn't sell the transducer alone. If you already bought fish finder from us before, please contact us through amazon message and we will give you the offer for the transducer alone.
Question:	It works in salt water
Answer:	Yes,this Lucky fish finder can work well in salt water. It is suitable for ocean、lakes and rivers. Hope this helps.
Question:	can you mount the transistor in side the kayak
Answer:	Usually people will fix the transducer on the hull of the kayak (the outside). Because the transducer can only be working when it touches the water.
Question:	Does it work well for ice fishing
Answer:	Yes it works well for ice fishing, although you must drop the transducer below the ice in order for it to read depth accurately. I also found that it has the potential to mis-detect large tube jigs as a fish, but I actually don’t mind that as it tells me how deep my bait is. I also use this with my kayak mounted with the bracket, so I get double duty. Battery life is fantastic even in below zero temps. I’ve been out with it on several outings below freezing and I’m still on the same set of batteries! I would recommend this product.

Product features

Function

• Well understand the water depth and fish location by the portable fish finder.
• The fish finder portable gives you alerts when fish and fish schools passing by.
• 5 modes sensitivity options enable you to use the kayak fish finder in different fishing environments.
• The kayak fish finder can be used in different ways, such as on ice, fixed to kayak, put it into a hole or float it on water surface.
• You can understand the composition of the bottom contour. Sands, rocks and weeks will be shown on the LCD display.

Specification

• 2inch TN/ANTI-UV LCD Display.
• Blue LED Back lighting.
• Measurement Unit: FT/M
• 1.81inch diameter transducer sensor.
• Detect Depth Range: 3ft~328.08ft (0.6m~100m) under sensor.
• Sensor coverage range: 45 degrees beam angle in 200Khz.
• Sensor Operating Temperature: 14°F to 122°F(-10°C-50°C) .
• Cable Length: 25ft (7.62m)
• Powered by: 4 x AAA batteries (not included)

For Kayak Fishing

1. Attach the Side-Scan Adapter to the boat hull using the mounting tabs.
2. Break though the hull of a boat. Place the fishing sonar sensor against the hull bottom 1 inch underwater.
3. The moving speed of kayak should be below 5mph.

For Ice Fishing

1. You should clear the snow on the ice layer. Make sure the surface is smooth enough. Put the LUCKY fish finder portable directly on ice layer to detect fish distribution in purpose of selecting a place to drill a hole.
2. There should be no air between the sensor and the ice and no air between ice layer and the underwater either. Otherwise, the portable fish finder will not work properly.
3. Cut a hole through the ice and put the fishing sonar sensor directly in the water. Enjoy the fishing gear

For Shore Fishing

1. Fixed the removable float on the cable.
2. Cast the fishing sonar transducer into water as far as you can.
3. You can cast the fishing sonar transducer either by your hand or by the fishing rod.

PiranhaMAX 4

Sharper image. Sharper teeth. With modern styling and larger 4.3" color LCD, the PiranhaMAX 4 will give you a fresh perspective on what's below your boat. Thanks to a redesigned, easier-to-use interface, unlocking the power of Fish ID+, fish alarms, depth alarms and zoom has never been simpler.

Features

Dual Beam Sonar: Choose from a narrow and a wide beam for great detail or a generous coverage area, helping you identify fish, structure and contours.

Tilt and Swivel Mount: Quickly adjust your viewing area angle.

Simply. Clearly. Better.

For over 40 years Humminbird has operated with one goal in mind: create difference-making days for anglers out on the water. Day-after-day, year-after-year, we've done just that.

• Patented sonar fish identifier technology
• LED beacon
• Rechargeable battery and charge status indicator light
• 10+ hrs battery life.Syncs with iOS (Apple) 10.0 and later operating systems and Android 4.3 or later that use Bluetooth Smart (4.0)
• Accurate sonar readings down to a depth of 135'
• 2 Snap swivel connections for use as bobber or as remote fish finder
• Free app on iOS and Android

User questions & answers

Question:	can you cast this by its own with no hook on one pool and cast a compleat ring with another pool. That way the ibobber scans and gives me readings
Answer:	I am considering a release clip on the I bobber to a separate line. It won't work for casting but if you are letting it out in a current it may be neat to see the fish hit the bait. But I would hate to lose it on a fish.
Question:	Can I use it as a simple depth finder white 5mph trolling ? ANd what is minimum depth
Answer:	You may find it tough to troll with it if not impossible. I just use it on my Kayak while paddling and it loses total accuracy. It skips bottom detail and depth is completely inaccurate. It tends to "artifact" on the screen. Also, the 3' minimum is pretty close although at times I've wondered exactly how accurate the depth is.
Question:	does this work with Amazon fire OS
Answer:	I got it working on my 2018 Kindle ...wouldn't know about older or newer models
Question:	Anyone compare the iBobber to the very similar (but 2x more expensive) Deeper portable fish finder
Answer:	Yes. I had the Deeper first, but lost the device in a rainstorm. I decided to get the iBobber as a replacement to the Deeper. The Deepers hardware and software is much more detailed than the iBobbers. The iBobbers only has a 90 degree scan, as opposed to the Deepers 90 degree, and 120 degree scans. The Deeper shows 4 different sizes of fish, along with several types of "fish" alarms. Both offer a 15 minute sonar scan replay.Please note that both sonar bobbers require re-syncing upon each and every use. As the sonar bobbers only turn on when in the water or charging. The Deeper has quicker syncing time than that of the iBobber. If I had to buy another sonar ball, I might first look at the sonar scanners available in a RC boat package. The RC option seems much easier to get the sonar scans "where" you want them, and less water noise when casting your sonar bobbers out. If I had to get another sonar "bobber" I would recommend the Deeper.Does this justify Deepers cost of roughly 2X the iBobber? What the iBobber brings to the table is simple easy to use scanning. The Deeper offers much more than the iBobber in regards to hardware and software

Product features

iBobber Wireless Fish Finder

The mobile fish finder and app that you can bring with you wherever you fish. The iBobber was designed with portability and flexibility in mind so anglers of all skill levels and types could take the latest in portable sonar fish finding technology with them on the go. Using an iPhone or Android mobile device anglers can mark fish, map depth contours and underwater structure, save water temp, weather and location, species, photos and hot spots and choose to share on social media directly if desired.

The iBobber is one of the best personal fish finder on the market for fishing from shore and docks, and is ideal for kayak, raft or canoe fishing and for bottom sounding areas not accessible by boat. It works in saltwater and freshwater, and is very effective at locating fish and structures on ponds, lakes, streams, and rivers. It even works for ice fishing.

The free app syncs via Bluetooth Smart to the iBobber device, and allows you to map waterbeds, mark spots, log water temps and depth, add lures, species, and photos in the trip log. The built-in LED beacon, and the strike and fish alarms, are great for ice fishing, carp, and night fishing. The high contrast design and the app’s anti-glare setting increases visibility in bright outdoor lighting.

Fishing Gifts

Do you have an angler or outdoors lover in the family for whom you'd like to buy some fishing gear for but don’t know what to get? Are you an angler worried that your spouse is going to spend a bunch of money on some gear you don’t need or already have? In either case we have a great solution for you. The iBobber portable fish finder and app is a great fishing gift for the angler on the go, the young angler just getting into fishing and even the seasoned pro with all the gear imaginable. There are several reasons why we think the iBobber makes a great fishing gift at the holidays, on birthdays, Father’s Day or Mother’s Day. The relatively low price and high quality are immediate advantages and even for the fisherman who has everything, including a fishing boat and lots of gear, chances are they don’t have a portable fish finder in their tacklebox.

A lot of anglers are very picky about their gear, especially rods, reels and lures and the iBobber is a great new piece of tackle that they most likely don’t already have. The iBobber is a personal sonar device that helps anglers catch fish in a wide variety of situations and will augment anyone’s individual fishing style. Plus, it’s cool and uses the latest in sonar and mobile phone technology and anyone who loves tech will enjoy using the iBobber. You can think of it as an iPhone fish finder or Android fish finder and it even works with the Google Watch and iWatch.

If your favorite angler loves ice fishing it makes a great Christmas / Holiday season gift because they will be able to go out and use it immediately. The iBobber and app are ideal tools for ice fishing due to the light weight and portability, making it easy to bring along on the ice, but also for the ice fishing features like the fish alarm, when fish are present, trip log to save your favorite spots, water temps, depths and species caught and GPS marking for future trips.

The app is free and so it’s especially useful for sharing with others like when camping or at a house on the water where lots of people come and fish and folks take out rafts, canoes, kayaks, rowboats, jonboats etc. The light weight and portability are features that make it perfect for camping, RVing and hiking trips and for times when using a boat is not practical or allowed. If the angler in your family has their phone, the ultralight iBobber and their current fishing gear they can find fish anywhere they go.

Shore Fishing

Catching more fish from shore requires some preparation and using a castable fish finder is a great way to figure out what the bottom looks like. The iBobber is one of the lightest of the portable fish finders that can be cast long distances to map the bottom contours and locate schools of fish or structure, ledges and holes where the big ones lurk. You can GPS mark spots, laydowns (trees that have fallen), weed beds, dropoffs and other underwater structure where fish might be lying in wait to ambush baitfish.

Dock and Pier Fishing

The iBobber is great addition to your tackle bucket for pier fishing. You’ll have the advantage over all the other anglers who don't know where the fish are. Whether in freshwater or at the ocean, just cast out to map the waterbed, mark fish and save GPS locations and you’ll catch more and larger fish every time. Use the iBobber fishfinder feature to locate and warn you when schools of fish gather under docks and piers and use the fish alarm to let you know when they are biting.

Kayak and (SUP) Fishing

Portable watercraft fishing is the fastest growing segment in the fishing industry and for good reason. Whether fishing in saltwater for redfish or freshwater for large or smallmouth the appeal of these craft is obvious, especially when many great fishing waterways don’t allow powered watercraft. There’s something primeval about getting closer to nature and your targets and doing battle with a big fish from a small boat. The iBobber is one of the perfect kayak accessory as a fish and depth finder that doesn’t require permanent installation and allows for reach beyond the hull.

Ice Fishing and Night Fishing

If your favorite angler loves ice fishing it makes a great Christmas / Holiday season gift because the recipient will be able to go out and use it immediately. The iBobber and app are ideal tools for ice fishing due to the light weight, portability and the fish finder and fish alarms, that let you know when fish are present and when they bite. Also use the trip log to save your favorite spots, water temps, depths and species caught and GPS marking for future trips.

• Find Accurate Fishing Location: Wireless fish finder will catch the action of the fishes, and show information on the kayak fish finder. You can use it to track the right place, to confirm the location and depth of fishes. Cast the handheld fish finder out to water or tie it to your boat, the ice fish finder will update information to your boat fish finder. Testing the place before catching fishes will be helpful to improve the efficiency and fun
• The Wireless Depth Finder: The wireless fish finder operation distance is 393ft(120m). Compared to other portable fishfinder, it gives you greater range for fishing. Meanwhile, it will shut down when operation distance is beyond 393ft. Tether kayak transducer sonar to the line or rod, then cast it into water as far as you can. Ice sonar transducer would work automatically as soon as it touches the water.
• LCD Depth Display: The wireless fish finder can detect and display water depth, rocks, short & tall weeds and bottom contour. It also displays approximate fishes location. You can freely choose water depth measurement unit either in meter or in feet. Fish alarm setting will alert you when schools of fish appear. The LCD backlight allows you to see the screen clearly, day or night. It would be more useful when you go fishing on boat or kayak.
• Portable Fishing Sonar: The size of the shore fish finder is 6.6*12cm, you can easily put it in your pocket, or hang it around neck. It is so convenient to carry on for go out and comfortable to use. The portable depth finder would be useful for ice fishing, sea fishing, and so on. The fish finder sonar would lead the newest way for everyone.
• Wide Application: The ice fish finder can be used on boat, canoe, kayak and float tube. The sonar transducer will be useful for bank ice fishing. When you on a moving boat using your fish finder, the speed of the boat should be below 5 mph. It is also a good choice for boat kayak turbid and river fishing. If you have any questions, please contact us, we will definitely reply within 24 hours and provide the satisfactory solution.

User questions & answers

Question:	How do you change it from meters to feet
Answer:	comes with template and instructions
Question:	Can the wireless sonar be hung over the kayak as long it touches the water
Answer:	Yes it does
Question:	Will it denote brush piles
Answer:	No. Only hook2 4x
Question:	Minimum water water depth
Answer:	Nope

Product features

Functions of LUCKY Fish Finder

• Anti-UV Color LCD Display: The screen is easy to read in day and night.
• Sensitivity Adjust: 5 modes sensitivity options enable you to use this portable fish finder in different fishing environments.
• Wireless Sonar:The transducer of portable fishing sonar is wireless,you can attach the portable fishing sonar to the fishing line and cast it into the water.The 392ft operation distance of portable fishing sonar will make more convenient for fishing.
• Fish Alarm: The kayak fish finder will remind you when it detect fishes.
• Backlight: You can turn on the backlight when night fishing.
• Battery Save: Open battery save mode would make sure the ice fishing fish finder work longer time.
• Bottom Contour:The portable fish finder would detect approx fish location,water depth, short & tall weeds, sand & rocks.
• Fish Location Indicator:It will show approx fishing location on your portable fish finder.

Wireless Fish Finder

Wireless fish finder operation distance is 393ft(120m). Compared to the other fish finder, it will make the longest operation distance.And this portable fishing sonar provide the more accurate fishing information such as approx fishing location,water depth, rocks, short & tall weeds and bottom contour. This will be the good choice for depth finder in every fishing environments.

For Boat/Kayak Fishing

Attach the Side-Scan Adapter to the boat hull using the mounting tabs. Place the sonar sensor against the hull bottom 1 inch underwater.

For Ice Fishing

Dig a hole on the ice. Put the sensor transducer into hole and make sure two poles of sonar touches water. Portable fishing sonar will be the helpful tool for ice fishing,it would be ice fishing fish finder

For Shore Fishing

Attach sonar sensor to your fishing line then cast it into water Sonar sensor is attached to fishing line on fishing rod and cast sensor into water.

• 【Wireless and Portable】 The wireless fish finder has maximum 120m(394ft) operating range. The handheld sonar fish finder is portable for fishing.
• 【2.2 inch LCD display】 Wide and clear display can show you Water Depth, Water Temperature, Battery Strength, Sensitivity, Zoom Range, Bottom Contour, Fish Icon with Depth. LED backlight design allows you to read clearly at night.
• 【90º Detect Angle】 This fish finder supports 90º sonar detect angle with depth detection range from 2.3ft( 0.7m)to 147ft(45m).
• 【Wide Use in Fishing】Two small holes on the sonar sensor portable allow you to tether with your fishing line and cast it into water as far as you want. Suitable for shore fishing, kayak fishing, ice fishing, sea fishing, boat fishing, etc.
• 【4xAAA Batteries needed】4xAAA batteries are needed when you use the wireless fish finder. Warm tip: the batteries are not included in the package.

User questions & answers

Question:	Will the unit show depth in feet and temperature in degrees F
Answer:	Dear Amazon Customer, It's Lucky fish finder which has a single sensor that is only compatible for Lucky monitor software. So the corded sensor is not compatible for this type Lucky fish finder with the wireless sensor.
Question:	Will this detect your jig going down under the ice
Answer:	The wireless sensor uses a button battery that lasts for about 40 hours.
Question:	Will the same sonar transducer on all 77 series receivers
Answer:	yes you can use fishfinder for ice fishing
Question:	Does it tell you the fish size
Answer:	It does come with everything included in the black box with detailed instructions.

Product features

90° Detect Angle

The wireless sonar sensor can detect the depth up to 45m(147ft) with 90° detect angle.

You can read the water depth, water temperature, fish size, fish depth, bottom contour and battery life on the screen.

Come with a 3V CR2032 Button Cell Battery for the wireless transducer.

Parameters You May Concern

Display Size: 41 (W) x 48 (D) mm (1.61\' x 1.89\' inch)

Wireless Frequency: 433 MHz; 125 kHz sonar frequency

Depth Range Max/Min: 147 feet (45 meters)/2.3 feet (0.7 meters)

Wireless Fish Finder Operational Range: 394 feet (120 Meters)

Memory: Built-in memory stores sonar setting when the unit is turned off

Operating Temperature: 14°F to 122°F(-10°C to 50°C).

Battery life of Wireless Sensor: 6-8 hours in water usage

Controller: 4 x AAA Alkaline Batteries (not included)

Ice Fishing

Sea Fishing

Shore Fishing

• Waterproof : The handheld fish finder is waterproof in rains. No need to worry the splashes makes the display damaged any more. Even though the handheld fish finder dropped into the river or lake, the fish finder would be floating on the water surface. You just need to put the portable fish finder in open air after fishing to avoid water vapor generated inside display because of the temperature differences.
• Water Depth & Fish Location : You can easily get to know the water depth when the sonar transducer fully in the water. If you attached the sonar transducer to the hull of your boat or kayak, you will know the water depth distribution of a specific area when the boat or kayak is moving. It will be easier to find a good position for fishing. Meanwhile, you could also know the approximate fish location and fish size by the handheld fish finder display.
• Wireless & Wired : The fish finder supports max 328ft wireless operation and max 147ft water depth detection for wireless mode. The depth detection range can be up to 328ft in when you switch to wired mode. There is a 25ft/7.62m extension cable and an anti-fish bite plastic float comes with the wired transducer. The handheld fish finder is USB rechargeable design by a built-in lithium battery.
• Sonar Transducer with Attractive Lamp : The sonar transducer works with 125Khz in a 90 degrees beam angle. The wireless fish finder will alerts when the sonar ball detects fish or fish schools. Even more, you will get alarm when it detects shallows. You can put the replacement transparent cap on the sonar ball which will be glowing in the dark, so you will easy to know where the sonar ball is when night fishing.
• Ideal for Fishing : LUCKY ice fish finder is widely applied in ice fishing, kayak fishing, boat fishing and bank fishing. The fish finder and its sonar transducer can be working for 5~6 hours continuously after fully charged. Once the battery save mode is turned on, it could be working even longer than 10 hours.

User questions & answers

Question:	Does it have gps
Answer:	Hi there,this wirelss fish finder waterproof doesn't have the function of GPS.
Question:	Does the wireless automatically connect to the hand held
Answer:	Yes, once you select the wireless option when you turn on both the handheld unit and the wireless transducer.
Question:	can you point it twards shore and see what is between shore and boat
Answer:	Yes, as long as the distance between you and the shoreline is within the maximum radius of the transducer (believe it’s 100 feet?)
Question:	The product image shows a stowage case however its not listed under retail contents. What all comes with this
Answer:	The package of this handheld fish finder would include the stowage case just like the image.The package include fish finder,wireless sonar ball,transducer with 25ft cable,USB charging plug and cable,car charger,side-scan adapter,stainless bolt and wing nut,glowing cap & swivel snaps,also include the stowage case.

Product features

Advantages

• The display of the handheld fish finder is waterproof against rains or splashes. Even thought it was dropped in the water, the display will not be damaged.

Wired & Wireless Design

• The fish finder can be freely switched to wired mode or wireless mode based on the different fishing environment.
• Side-Scan Adapter
• Stainless Bolt and Wing Nut

Anti-corrosion Material

• The portable fish finder can be used either in freshwater or saltwater. You just need to dry it in open air after fishing,and it will prolong the life time of this fishing gadgets.

Ice Fishing

Kayak Fishing

Boat Fishing

Bank Fishing

Product description

This amazing fish finder is specially designed for amateur and professional fishermen to find fish location, depth and bottom contour of water, perfect to be used in the sea, river, lake and fantastic for detecting schools of fish in any particular area,suitable for Ice Fishing, Kayak, Boat and Shore Fishing.



Specifications:

Material: Plastic

Display: 3.5" TFT LCD

Resolution: V320 * H240

Front Lighting: White LED

Depth Range: 0.6m-300m / 2ft-984ft

Sonar Frequency: 200/83KHz dual beam

Language: English / Russian/ French / Japanese / Finnish / Polish / German / Italian / Spanish / Dutch / Korean / Swedish / Greek / Danish

Input Power: DC 10-18V

Operation Temperature: -20~+70°C

Item Size: 16 * 10.2cm / 6.30 * 4.02in

Item Weight: 388g / 13.69oz

Package Size: 18 * 11.7 * 17.2cm / 7.09 * 4.61 * 6.77in

Package Weight: 977g / 2.15lb



Package List:

1 * Fish Finder

1 * Transducer

1 * Power Cable

1 * User Manual (English)

• This amazing fish finder is specially designed for amateur and professional fishermen to find fish location, depth and bottom contour of water, perfect to be used in the sea, river, lake and fantastic for detecting schools of fish in any particular area.
• Display type: 3.5" 18bit TFT V320XH240 sunlight readable. Depth reading from 1.8 to 984ft (0.6-300m) in 1/10th precision. Bottom contour and water temperature indicator. 100 levels of sensitivity setting and multi-level depth range.
• Auto zoom bottom tracking and quick manual zoom. "Stop chart" at any time. Multi-language menu settings (English / Russian/ French / Chinese / Japanese / Finnish / Polish / German / Italian / Spanish / Dutch / Korean / Swedish / Greek / Danish). Big/small fish identification and fish depth indicator.
• User selectable feet or meter reading. User selectable sonar chart mode. Clear fish icon. Depth compensation. Audible fish and depth alarm, depth alarm 3-99ft.
• 200KHz/83KHz duel beam sonar frequency. Anti-interference from the grass when used in lake. Display different bottom (grass, sand, rock) in the sea. 800 watts maximum output power; 100 watts RMS power. Battery strength indicator. Perfect for ocean, river, lake fishing, etc.. 800 watts maximum output power; 100 watts RMS power. Battery strength indicator.

User questions & answers

Question:	Can you order new wires for this
Answer:	I’m sorry I can’t answer your question. I bought this item as a gift for a friend in Ecuador. I don’t know anything about it c
Question:	what is the warranty on the FF688C Phiradar fish finder
Answer:	I don't know this was a gift to my stepson
Question:	Does this finder have gps
Answer:	Hello, It does not have GPS, its only a sonar for fish finding and depth.
Question:	What type of battery can I use
Answer:	12v, boat battery

• Waterproof : The portable fish finder is waterproof in rains. No need to worry the splashes makes the display damaged any more. Even though the portable fish finder dropped into the river or lake, the fish finder would be floating on the water surface. You just need to put the handheld fish finder in open air after fishing to avoid water vapor generated inside display because of the temperature differences.
• Water Depth & Fish Location : You can easily get to know the water depth when the sonar transducer fully in the water. If you attached the sonar transducer to the hull your boat or kayak, you will know the water depth distribution of a specific area when the boat or kayak is moving. It will be easier to find a good position for fishing. Meanwhile, you could also know the approximate fish location and fish size by the portable fish finder display.
• Stable Sonar Transducer : The sonar transducer of the portable fish finder is working stable and reliable both in freshwater and saltwater. It offers a 45° beam angle underwater in 200Khz which supports maximum 328ft/100m water depth detection. There is a 25ft/7.62m extension cable and an anti-fish bite plastic float comes with the sonar transducer. The portable fish finder is USB rechargeable by a built-in lithium battery.
• Data Display : The fish finder displays water depth and temperature on the left top. The measurement unit can be freely changed in FT/M and ℉/℃. Besides water depth and fish location, you can also choose a particular underwater area to watch the size and location of the fishes.
• Ideal for Fishing : LUCKY waterproof fish finder is widely applied in ice fishing, kayak fishing, boat fishing and bank fishing. The portable fish finder can be working for 5~6 hours continuously after fully charged. Once the battery save mode is turned on, it could be working even longer than 10 hours.

User questions & answers

Question:	What is the warranty on this product
Answer:	Hello, we provide one-year warranty for this product. If there are any quality problems with the product, please contact our customer service team directly via Amazon email.Hope this helps.
Question:	So this cant be attached to the bottom of a pontoon?! Based on the description, Thats why we bought this. But after receiving, this is just a bobber
Answer:	Usually, the fish finder could be attached to the hull of the kayak directly, because there usually be a hole on the hull of kayak. However, if you can't attach the transducer to the bottom of your pontoon, please contact our customer service through amazon message, and we will help you out with your problem.
Question:	will this mount under a kayak from walmart
Answer:	Yes, this fish finder is suitable for kayaking fishing, you can fix the sonar transducer to the hull of the kayak or by LUCKY transducer arm mount.
Question:	I know this will pick up fish and bottom topographical image's. Will it show your bait so you know how far down you are
Answer:	Hi,this waterproof fish finder could detect your bait if your bait keep moving and the sensitivity of your fish finder be adjusted to full.

Product features

Advantages

• The display of the portable fishing finder is waterproof against rains or splashes. Even thought it was dropped in the water, the display will not be damaged.

Anti-corrosion Material

• The portable fish finder can be used either in freshwater or saltwater. You just need to dry it in open air after fishing,and it will prolong the life time of this fishing gadgets.

Anti-fish Bite Sonar Transducer

• We choose polymer plastics for the float instead of the foam. The surface of the sonar transducer is much more smooth, and it is difficult for the fish bite.

Ice Fishing

1. Clear the snow and put the sonar transducer on the smooth ice layer. Then the fish distribution under the ice layer could be displayed on the portable fish finder host.
2. There should be no air between the sensor and the ice and no air between ice layer and the underwater either. Otherwise, the portable fish finder will not work properly.
3. Cut a hole through the ice and put the sonar transducer directly in the water and enjoy the ice fishing

Kayak Fishing

1. Fix the sonar transducer to the hull of the kayak or by LUCKY transducer arm mount.
2. Put the sonar sensor submerged completely in the water and you will get useful fishing data on your portable waterproof fish finder.

Boat Fishing

1. Attach the Side-Scan Adapter to the boat hull using the mounting tabs.
2. Break though the hull of a boat. Place the fish finder transducer against the hull bottom 1 inch underwater.
3. The moving speed of kayak should be below 5mph.

Bank Fishing

1. Fixed the removable float on the cable.
2. Cast the fishing sonar transducer into water as far as you can.
3. You can cast the fishing sonar transducer either by your hand or by the fishing rod.