11 best self powered subwoofer

Product description

The EON618S is a powered portable PA subwoofer in the EON600 series from JBL professional. It has been designed to deliver class leading performance in a variety of applications supporting EON600 and other full range systems. A lightweight, highly useful enclosure allows the speaker to be easily transported and set up wherever low frequency Reinforcement is needed. Grille : Powder coated, Obsidian, perforated steel with acoustically transparent black cloth backing

• Jbl premium transducers
• 1000W highly efficient Class-D amplification
• Maximum SPL output: 134 dB
• System Type: self powered 18” subwoofer
• 3 parametric EQs + Hi & Lo shelf gain and delay save and recall settings polarity Inversion
• Input: balanced combo ¼”/ XLR (x2); output: male XLR (x2)
• Ac input voltage: 100 – 240VAC (10%), 50/ 60Hz

User questions & answers

Question:	Is this powered by battery
Answer:	Yes, with the included push stick.
Question:	Is this 1000w RMS
Answer:	No, Designed specifically to fit the SKILSAW SPT99T table saw which is an 8 1/4" table saw.
Question:	Can these subs be daisy chained with each other
Answer:	I bought my saw two years ago and it came with the black non-diablo blade that everyone is negative about. I've cut several 100 linear feet of cedar (very soft) no issue. Also about 80 ft of brazilian rosewood decking (ild recycled), and I guess about 50ft of IPE. Also quite a lot of pressure treated dimensional lumber. The IPE is hardest on any blade. The big issue with the starter blade is that the carbidge pieces used to construct the blades cutting edge are very small. That translates I I guess either no sharpening or at best 1-2 touch ups. The Freud Diablo blade will have significantly better blade life wrt resharpening. I could close by saying the original blade is acceptable in use, but probably limited resharpening.
Question:	I want to integrate this into 4 Extreme2's in my car using bluetooth only. Can this play a signal sent via bluetooth without having to use a cable
Answer:	no side one then flip and do outher side.

Product features

JBL EON618S

The EON618S is a powered portable PA subwoofer in the EON600 series from JBL Professional. It has been designed to deliver class leading performance in a variety of applications supporting EON600 and other full range systems. A lightweight, highly useful enclosure allows the speaker to be easily transported and set up wherever low frequency reinforcement is needed.

Ergonomic and portable

Enclosure designs have been optimized for ideal acoustic resonance taking advantage of injection molding techniques and mechanical shaping of the enclosures. This results in tremendous increases in cabinet volumes which enable better acoustic performance while maintaining the same footprint. Two intelligently positioned handles make the 600 easy to carry and move around. Integrated hardware mounts, designed into the enclosures, allow each model to be flown when required. And indexed feet molded into the enclosures allow for convenient storage and transport, secure stacking for stage monitor and traditional stand up configurations, and unique acoustic configurations.

JBL waveguide technology

The EON618S’s extraordinary performance results from a breakthrough approach to waveguide design. JBL engineers examined the radiation characteristics of the EON’s high and low frequency drivers at 36 different points employing JBL’s exclusive, state of the art measurement techniques, then designed the Image Control Waveguide ensuring the sound radiation and coverage pattern match at the high frequencies, the crossover point and the low frequencies. The result is consistent response throughout its 110 degree coverage pattern. The quality and consistency between on axis and off axis response delivers uniform coverage and high intelligibility throughout the coverage area, which means the EON618S’s smooth, transparent sound is the same for the entire audience.

Bluetooth integration

Knowing that fine tuning your sound needs sophisticated yet convenient control, JBL engineers developed an iOS and Android supported Bluetooth v4.0 compliant interface for controlling master volume, adjusting the 5-way, user definable parametric EQ, and saving and recalling user presets.

Purposeful product design

The total redesign of the EON platform leverages the latest technologies in cabinet materials, acoustic science, transducer design and user friendliness that delivers the extraordinary quality of a high-end studio monitor in a fully professional, highly flexible, easy to use, portable system for today’s working musicians and sound providers.

The EON618S enclosure has been designed to maximize cabinet volume while maintaining a highly transportable footprint. This has lead to extraordinary Low Frequency production, making the EON18S the loudest, lowest, cleanest subwoofer in its class.

Product description

Add deep bass excitement and extended dynamic thrills to your music or movie sound system with the easy-to-connect and easy-to-use PSW 10. Its 10" Dynamic Balance composite cone driver and non-resonant enclosure produces deep, smooth response with superior detail and accuracy, while limiting distortion. The sub is powered by a high-current amplifier producing 50 Watts RMS/100 Watts dynamic power. A rotary volume control adjusts the volume of the subwoofer relative to the other speakers in the system and the unit offers a continuously variable low-pass filter, adjustable from 80-160 Hz. Easily accessible, professional-grade line- and speaker-level inputs, and speaker level outputs, allow easy connection to any system.

• POWERED SUBWOOFER FOR EXTRA BASS & PUNCH – A 10-inch Dynamic Balance woofer & a uniquely configured directed port provides accurate bass with added depth that brings your music and movies alive. A perfect solution for your small-to-mid size room
• LOUDER CLEARER SOUND EVEN AT HIGH VOLUME – Enjoy a thrilling yet balanced music experience with rich, deep sound, even at low frequencies. BLENDS EASILY WITH ANY SPEAKER and plays the most demanding nodes effortlessly without any distortion
• Double the amplifier power to 100 watts of dynamic power with its in-built 50-watt rms amp. Sophisticated engineering with best in class resonance-free driver materials make this sub highly durable and fit for extended use
• EASY TO INTEGRATE WITH EXISTING SYSTEMS – Hook up this sub to the receiver and upgrade your music sound instantly. Features continuously variable 80-160 Hz crossover and 40-160 Hz (-3dB) frequency response
• A sleek detachable grille on the front, speaker and line-level inputs as well as speaker-level outputs on the back, and a Phase Toggle Switch for multiple subwoofers, make this sub cohesive and complete

User questions & answers

Question:	What in your opinion is the best power setting for normal use, "on" or "auto" for this unit
Answer:	I would say depends if you use the item everyday/constantly as your sound for your surround. Or if you use surround/theater occasionally. If the latter I would use `on/off` , if you use it often or primarily the auto would be the way to go in my opinion. Plus is the sub easy to get to? Auto is great if its behind furniture or out of reach,etc.
Question:	Does this speaker have a volume control? Thanks
Answer:	Just to clarify something a previous reviewer stated: "Note: If you are using a Sub out/LFE connection from your receiver turn the Low Pass all the way up. " This does not apply to receivers with which you can specify the low-pass cutover frequency. For example, my modest Onkyo receiver has cutover settings of 80/100/120 HZ for the LFE/Sub output. If you have this option, you should consult your main speaker's manual for suggested low-pass settings or simply tune them by ear. For my setup, 120 HZ was both the recommended and best-sounding cutover frequency. 160 HZ was a little muddy :)
Question:	Can this sub be added to a Vizio 2.0 sound bar, for small to medium-sized HDTV's? If not, what should I get? For TV/Games/Music
Answer:	Like John, I too have a Vizio 2.0 sound bar and this pairs very well. I have a small theater room (10 x 20) and this one 10" fills the room. This sub is the best bang for the buck you can get.
Question:	Do I need a Y-adpater? A sound tech told me one sub wire would do the trick and just plug it into the L and ignore the R. Is this true
Answer:	Initially, used a one wire connection. Sounded OK, but .... Got a "Y" connector, attached at the rear of the amp, ran L & R wires to the PSW10: sounds amazing now and very adjustable. Need to get the PSW12 to get a one wire connection. Am very satisfied with this sub and would recommend it. Used in a 12' X 20' room, front/back/center and now the sub. Tom

Product features

Single 10" Subwoofer

• PSW enclosures are designed and engineered for perfect volume, minutely tuned for distortion-free low frequencies, and internally braced and damped to eliminate internal standing waves and other performance-robbing resonances.
• This unique configuration uses a specially tuned and directed port to more efficiently produce maximum bass impact.

100 Watts

Unique design keeps your subwoofer stable and steady even at radical volume levels, for more efficient use of power. No more "escaped washing machine" syndrome.

Laser-Based Klippel Measurement Technology

Our state-of-the-art Klippel distortion analyzer optimizes the woofer's motor structure, voice coil alignment and suspension for smooth, unimpeded movement over a broad spectrum of the lower frequencies to ensure the best, most efficient performance even at extreme listening levels.

Resonance-Free Dynamic Balance Driver Materials

PSW Series subwoofers outperform the competition with durable, resonance-free Dynamic Balance driver materials that stay stiff and move fast. You experience deep, musical low frequencies and thrilling effects with superior system blending.

Easy Connection to Any System

Inputs

• Audio Inputs: Stereo Line Level - RCA, Pair (L/R) Analog RCA.
• Speaker Inputs: Pair of Spring Terminals.

Outputs:

• Audio Outputs & Speaker Outputs.
• Pair of Spring Terminals.

Unique Design Keeps Your Subwoofer Stable

Unique design keeps your subwoofer stable and steady even at radical volume levels, for more efficient use of power. No more 'escaped washing machine' syndrome.

Product description

The JBL PRX800W series is the most advanced PA in its class. Wi-Fi technology and sophisticated DSP give you complete control over system tuning and performance via the free PRX Connect app. An efficient 1500-watt class-D amplifier and patented JBL Differential Drive technology provide best-in-class power and reduced weight. And the rugged all-wood cabinets feature a redesigned input panel and universal power supply for easy, reliable operation worldwide. Designed to deliver legendary JBL sound for bands, DJs and more, PRX800W represents the next generation in smart live sound reinforcement.

• Complete Wireless Control with the PRX Connect App
• Powerful JBL Sound, Compact Design
• Tour-Proven Reliability
• Industry-Leading HARMAN Technology
• Flexibility for Any Gig

User questions & answers

Question:	What is the return policy
Answer:	Yes you can. Please search for ASIN B005DJ7WR2. The inventory for Amazon prime is on the way. It should be available within 1 week. You can also try ASIN B005C235IA if you have 4 speakers.
Question:	Why is the fan not working when I turn on the speaker
Answer:	I'm not familiar with those speakers, but if they have a notch on back to be hung on a wall, then they may work.
Question:	It’s Bluetooth
Answer:	they should work with any speaker with a key hole mount.
Question:	Whats the difference between 825 and 835? price is same, anything i am missing
Answer:	I don't know for sure but seem to be universal speaker stands. I have sony

Product features

JBL PRX818XLF

The PRX818XLF extended low frequency subwoofer was designed and engineered to provide sub bass frequencies with accuracy and power. Used as a single sub in a sub/sat system or in multiples as part of a scalable, large-format sound reinforcement system, the PRX818XLF performs with exceptional efficiency and control. The subs are stackable and lightweight, ensuring quick set-ups and tear-downs. The addition of a polarity reverse option further enables system optimization. Due to their rugged construction, they are perfect for AV rental inventories. With the integrated stereo pass-thru this is the most powerful low-frequency complement to PRX full-range systems. PRX800 subwoofers feature a standard M20 threaded pole cup that can accept most modern subwoofer-mounted speaker poles.

1500 Watts of Power

With integrated 1500-watt Class-D power amplifiers, PRX800 is the most powerful, efficient system in its class. Patented JBL Differential Drive woofer technology reduces magnet mass while increasing power handling. Both of these features work together to make PRX800 a remarkably lightweight system capable of delivering clear, pristine audio at extraordinarily high volumes.

Wi-Fi Control

PRX800 Series is the first PA system in its class to feature complete wireless control via Wi-Fi, giving you a powerful new way to set up, configure and optimize the performance of your live sound system. With a free custom-designed app, you can set up and run your system in any room with ease. Whether you’re working in a difficult acoustic environment or making sure you have the headroom to drive your band harder, you have the tools at your fingertips to make your system sound perfect every single time.

Roadworthy and Tour Tested

All PRX800 cabinets are built from 18 mm, strong, light-weight poplar plywood made structurally sound with tongue and groove joints. All PRX800 Series cabinets are protected by JBL’s tour proven DuraFlex finish. Grilles are made from dent-resistant 16-gauge steel and handles are made from light-weight glass-filled nylon for added strength and durability. All M10 suspension points are constructed from 14- gauge steel and have been tested with a yield-strength of 1000 lbs. Each.

Product description

VPAS10 – 10″ Vega Powered Active Subwoofer

Features



CERWIN-VEGA MOBILE’S assortment of award-winning VEGA ACTIVE POWERED SUBWOOFERS provides the ultimate all-in-one Bass Solution Package without taking up any valuable trunk space. With a fully integrated amplifier encased in a cast aluminum heatsink in conjunction with the subwoofer, simple plug and play operation is achieved. The innovative Spare Tire Application Product offerings make for a custom-fit look for most vehicles.



Specifications



Power: 200W RMS @ 2Ω @100Hz, 450W MAX

Bass Boost: 0-12dB

Subsonic Filter: 35Hz

LPF Filter: 75-150Hz

Phase Switch: 0 or 180 degrees

PWM MOSFET Power Supply/Thermal Protection Circuit

Adjustable Input Sensitivity

Remote Subwoofer Control Included

RCA and High-Level Inputs

Delayed Soft Remote Turn On

Slim 10” 2Ω subwoofer

Dimensions: 13.6” X 9.65” X 2.8”(L X W X H)

345 X 245 X 72 mm (L X W X H)

Remote Bass Knob Included

• Power Handling: Peak: 550 watts RMS: 200 watts
• PWM MOSFET Power Supply/Thermal Protection Circuit Remote Subwoofer Control Included RCA and High-Level Inputs
• Delayed Soft Remote Turn On Adjustable Input Sensitivity
• Variable Bass Boost: 0 - +12 dB Variable Low-pass Filter: 85 - 150 Hz
• Constant Subsonic Filter: @ 35Hz Selectable Phase : 0 or 180 degrees
• Fuse Rating: 25A x 1 Dimensions: 13.60" L x 9.60" W x 2.60" H (approx)

User questions & answers

Question:	What are the actual dimensions in one area it has dimensions and then the other area has totally different dimensions in
Answer:	Made in China.
Question:	Dos bocinas por
Answer:	dre81, the Straight Double-X Pliers is 13.46" OAL and the 45 Degree Double-X Pliers is 13.27" OAL. Thanks, Richard Douglas Sales
Question:	Does this has an auto turn on
Answer:	If understand correctly length between center of hinge and end of pliers is 3 inches they open up to 2 and quater inches
Question:	Can this be used with a home theater by connecting it to the tv with rca cables
Answer:	No, Gear wrench is made in China. They're better than most Chinese tools but they are NOT made in USA.

• The Punch P300-12T is a universal "all in one" self-contained subwoofer enclosure with built-in amplifier for dropping Bass in any factory or aftermarket system
• The 12" high output subwoofer is impedance optimized for the built in 300-watt class-D amplifier in a slim design enclosure - Dimensions: 15" x 25.8" x 4.8" x 8.5"
• Featuring an adjustable 12db/Octave low pass crossover, on board adjustable bass boost EQ, and on board phase switch
• The enclosure can be connected via speaker level inputs for connection to factory systems, or traditional line level inputs for aftermarket systems
• Famous Rockford Fosgate build quality with a full 1-year warranty when purchased from an authorized Rockford Fosgate reseller

User questions & answers

Question:	Would this be a good birthday present for myself? Want to put this underneath the passenger seat in my truck
Answer:	I would think it would be a great birthday gift to yourself! But make sure you measure carefully to insure that it will fit under your seat. It's dimensions are 15" tall x 25.8" wide x 4.8" top depth x 8.5" bottom depth. Thanks for your interest in Rockford Fosgate!
Question:	Will this fit behind gen 2 Tacoma double cab without removing plastic compartment
Answer:	Dont know never owned a toyota ever. I know it will fit under 2013 f150 back seat.
Question:	So this is my first time getting a sub and it’s all in one which is nice what do i need exactly i got the wiring kit 8 gauge and rca adapter
Answer:	You need to run a solid copper ground wire, at least as thick AWG as the power wire (sounds like you’re using 8 AWG), from the sub’s ground input to your vehicle chassis. Make sure the ground point is good (use a multimeter to test). You may need to grind some paint off a metal surface to create a solid ground to the chassis. Run your power cable from the battery to the sub. Use a 75amp fuse on this run. Connect the fuse closer to the battery than the sub. Run an additional, very thin gauge wire (such as 18) to the amp turn on of the sub input. This wire controls power to the sub , so you don’t want it always on because that would drain your battery. You can hook up your car’s antenna 12v to this sub turn on, for example, since the car automatically turns off power to the antenna. The RCA you can either run from some existing speakers using a LOC or run the RCA connected directly to your head unit (stereo). In my Mustang, I used a LOC to connect the sub directly to my rear speakers in the trunk. I also wired the sub turn on wire directly to my antenna turn on wire because that is also conveniently in my trunk.
Question:	I was comparing the p300-12T to the same one listed on Crutchfield and the dimensions are different. Has this been redesigned
Answer:	I think it is the same sub. Crutchfield has the wrong dimensions listed for the P300-12T. It is 25.8" wide. Amazon has the correct dimensions. I received mine the other day, and I was glad to see that Amazon had the correct dimensions. Amazon also has a much better price.

Product features

All-In-One Bass With Power!

The Punch P300-12T is an "all in one" solution for dropping Bass in any factory or aftermarket system. This model features a 12" high output woofer with a 300-watt internal amplifier in a slim design enclosure that's great for universal truck applications. The enclosure features quick release input and power connectors for easy removal when extra space is required and the "Closed-loop" design ensures optimum performance between woofer, amplifier and enclosure. This "all in one" solution is great for systems that need extra Punch on the low-end of the frequency spectrum.

Sealed Enclosure

• Constructed with 5/8" MDF (Medium Density Fiberboard) for the best acoustical properties and covered with heat activated vinyl finish to resist marks
• Quick Disconnect Power/Ground connector
• Dimensions (H x W x D1 x D2): 15" x 25.8" x 4.8" x 8.5"

12" Subwoofer

• Proprietary Rockford Fosgate high output 12" subwoofer
• Specifically designed and optimized to work with the built in amplifier to produce the highest output possible
• Frequency Response: 35Hz to 150Hz

Internal Amplifier

• Integrated Amplifier with 300 Watts of RMS power for high output but minimal impact on the vehicles charging and electrical system
• Class-D topology for a high-efficiency, low current design

Switches and Knobs for All Your Tuning Needs!

The amplifier incorporates a variable gain control to adjust the ouput of the woofer to match your system as well as a crossover and boost circuit to tailor the sound to your specific taste

• Built-in 0°/180° phase switch
• Separate low level and speaker level inputs
• Built-in adjustable gain & bass boost EQ
• Adjustable 12db/Octave low pass crossover
• Intelligent auto turn on/off function
• Large AWG input terminals

Included Remote Knob for Bass at Your Fingertips!

For even more control over your bass, we include a Remote Punch Level Control with the enclosure. Simply plug it into the amplifier panel and route the cable to your desired mounting position so you can do all your fine tuning from the drivers seat

Product description

Description of RTB12A:

Introducing the Rockville RTB12A Powered Subwoofer Tube. We at Rockville just had to manufacture a high quality powered bass tube. Growing up one of my best friends bought a car and it had a powered bass tube in it. The sound that it produced was just amazing and I will never forget it. Bass tubes push out some of the punchiest bass available. I personally love punchy bass that is deep and clean. Bass is an integral part of any good audio system, and the Rockville Bass Blaster amplified subwoofer tubes will add power and impact to your car audio system. The cylindrical shape of the enclosure helps focus the motion of the bass pressure so it maximizes that punchy output from both the woofers face and the tuned rear aero port. Strong deep bass will fire through your vehicle for astounding results.

Since this is a powered bass tube, you get everything you need! This is your entire bass system. The built in power amplifier will push this tube to the max. The amp, sub and enclosure are perfectly tuned and matched to sound perfect together.

Description of RWK10: The Rockville RWK10 10 AWG (American Wire Gauge) amp kit has the following differences over other amp kits on the market at this price point.

1. Our RCA cables are 100 % copper. These are top of the line RCA cables

2. Better Resistance: The only thing that really matters with wires is the resistance rating. This is a measurement of conductivity and how much signal is loss per foot of wire. Since Rockville wires are made with around 3 times as much copper as any other wire at this price point, these wires had a much better resistance rating which means they will transfer more power to your amps than the other brands.

3. We do not cheat you on the thickness of the wire. These are standard American wire gauge thickness. This is another reason our conductivity is better than anything else at this price point. Other brands in the market place write 10 gauge.

• Package Includes: Rockville RTB12A 12" 600w Powered Subwoofer Bass Tube + Bass Remote, Rockville RWK10 10 Gauge 2 Channel Complete Wire Kit + RCA Cables.
• Features of RTB12A: Rockville RTB10A 12“ 600w Powered Subwoofer Bass Tube With Bass Remote, 600 Watts Peak/300 Watts RMS, 10“ High power woofer in vented tubular enclosure, Integrated, built-in 300 Watts RMS Rated amplifier, Rear aero vent bass system, Speaker level and RCA line-level input.
• Frequency response: 30Hz-200Hz, Sensitivity: 111 dB, Adjustable bass crossover, Dashboard adjustable bass remote control, Molded steel woofer grill, Four steel mounting brackets + two canvas straps with Velcro fasteners, Tube is covered in durable aviation grade tweed with embroidered logo, Dimensions: 12.75” x 22.83“.
• Features of RWK10: Rockville RWK10 10 Gauge 2 Channel Car Amplifier Wiring Installation Kit, 17 High Grade Twisted Pair of 100% Copper RCA Cable, 17' 10 Gauge Translucent Blue SuperFlex Power Cables, 17 18 Gauge Blue Remote Cable, 17 16 Gauge Clear Speaker Wire, 3' 10 Gauge Clear SuperFlex Ground Wire.
• Gold Plated AGU Heat Resistant Fuse Holder, 40 Amp ATU Inline Fuse, 7 Split Tube Loom, Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets , Soft abrasion proof insulating jacket allows for 100% improved flexibility, PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F.

User questions & answers

Question:	Is it waterproof?? Does anyone have one on there boat
Answer:	The SM-SH51 Cleats that the pedals come with have a 5° Float
Question:	What connector is needed for high level inputs
Answer:	I recommend another peddle which is better for regular shoes and bike shoes: Shimano PDT400 Clickr Pedal. I have had both and have fallen many times with the PD-M540 but none with the PDT400. The PDT400 also has a plastic platform around it to support regular shoes. The two have a similar design but the PDT400 is a later model and is easier to get in to and out of.
Question:	Does it come with amp
Answer:	Yes they do, there two different kinds of cleats, these are the ones that only release by rotating the heal outward. The other type of cleat releases in multiple directions, I personally don't care for them.
Question:	Do i still need to buy an amp or not for it
Answer:	Average Weight 352g (pair)Series SHIMANOPedal System SPDSPD Cleat Surfaces both surfacesSpindle Thread BC 9/16" x 20 T.P.I.Spindle Material chrome-molyCartridge Spindle yesCleat Retention Indicator yesCleat Retention Adjuster yesMud Shedding Design yesPedal Body Material aluminum / barrel finishReflector SM-PD22

Product features

Rockville RTB12A 12" 600w Powered Subwoofer Bass Tube + Bass Remote+Amp Kit

Package Includes:

• Rockville RTB12A 12" 600w Powered Subwoofer Bass Tube + Bass Remote
• Rockville RWK10 10 Gauge 2 Channel Complete Wire Kit + RCA Cables

_________________________________________________________________________________________________________________________________________________________________

DESCRIPTION OF RTB12A



Introducing the Rockville RTB12A Powered Subwoofer Tube. We at Rockville just had to manufacture a high quality powered bass tube. Growing up one of my best friends bought a car and it had a powered bass tube in it. The sound that it produced was just amazing and I will never forget it. Bass tubes push out some of the punchiest bass available. I personally love punchy bass that is deep and clean. Bass is an integral part of any good audio system, and the Rockville Bass Blaster amplified subwoofer tubes will add power and impact to your car audio system. The cylindrical shape of the enclosure helps focus the motion of the bass pressure so it maximizes that punchy output from both the woofers face and the tuned rear aero port. Strong deep bass will fire through your vehicle for astounding results.



Since this is a powered bass tube, you get everything you need! This is your entire bass system. The built in power amplifier will push this tube to the max. The amp, sub and enclosure are perfectly tuned and matched to sound perfect together.

As far as power is concerned the RTB12A is a powerhouse. The compact package features a high power 12” woofer and 600-Watt amplifier that will literally shoot deep bass waves throughout your car. You can fine-tune the subwoofer with the built-in electronic low pass crossover so that your subwoofer meshes perfectly with the rest of your audio system. The built-in bass equalizer allows you to set in the exact amount of bass boost of up to 18dB’s @ 45Hz for real ground pounding bass while the included dashboard bass control knob allows you dial in all the bass directly and conveniently from the drivers seat.



Installation is a breeze! No need for building and wiring enclosures to amplifiers. Simply power, ground remote and send signal to the bass tube and you are ready to enjoy the most incredible bass you have ever heard.



"Good things do come in small packages" Rockville Bass Tubes will fit every vehicle without taking up valuable space and provide super low-end bass response. No permanent installation is necessary, the tubes come complete with 4 mounting legs and Velcro mounting straps so your bass tube will stay put where you place it.



Rockville Bass Blaster Tubes are the ultimate in functionality, just take aim…experiment with different placement positions, corner load, rear load or front load the bass tube and you will experience incredible bass response in any vehicle configuration.



Features:

• Rockville RTB10A 12“ 600w Powered Subwoofer Bass Tube With Bass Remote
• 600 Watts Peak/300 Watts RMS
• 10“ High power woofer in vented tubular enclosure
• Integrated, built-in 300 Watts RMS Rated amplifier
• Rear aero vent bass system
• Speaker level and RCA line-level input
• Frequency response: 30Hz-200Hz
• Sensitivity: 111 dB
• Adjustable bass crossover
• Dashboard adjustable bass remote control
• Molded steel woofer grill
• Four steel mounting brackets + two canvas straps with Velcro fasteners
• Tube is covered in durable aviation grade tweed with embroidered logo
• Dimensions: 12.75” x 22.83“

_________________________________________________________________________________________________________________________________________________________________

DESCRIPTION OF RWK10

 

The Rockville RWK10 10 AWG (American Wire Gauge) amp kit has the following differences over other amp kits on the market at this price point.

1. Our RCA cables are 100 % copper. These are top of the line RCA cables

2. Better Resistance: The only thing that really matters with wires is the resistance rating. This is a measurement of conductivity and how much signal is loss per foot of wire. Since Rockville wires are made with around 3 times as much copper as any other wire at this price point, these wires had a much better resistance rating which means they will transfer more power to your amps than the other brands.

3. We do not cheat you on the thickness of the wire. These are standard American wire gauge thickness. This is another reason our conductivity is better than anything else at this price point. Other brands in the market place write 10 gauge, but cheat you on the thickness. We are honest about the thickness.

4. The Rockville amplifier installation kits feature a new soft abrasion proof insulating jacket. This rugged PVC outer jacket allows for 100% improved flexibility over standard power cables making them extremely easy to route through your vehicles interior, and it maintains exceptional resistance to grease and oil. The PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F.

The RCA signal transfer cables included in this kit feature blue and silver twisted pair technology in a clear outer jacket insulation skin. Not only do the blue and silver wires look cool but they also provide superior signal transfer with maximum noise suppression. They are 100% copper to provide absolute lossless perfect signal transfer to your receiver. This technology reduces interference, so your audio signal flows clean and pure at all power levels.

The included 7 split loom tube provides protection for your power cable from the typically harsh environment found under the hood of your car.

Audiosavings product experts have tested this amp kit against many leading amp kits on the market and were were impressed not only by the great looks but by the quality of these Rockville installation kits as well. These kits had a lower resistance rating than the other brands we compared and tested them against. What this means is that Rockville manufactures their kits with more copper than other kits at this price point, ultimately providing your amplifiers with better and cleaner DC power, so they work cooler and more efficiently. You will hear the difference a Rockville installation kit will make!



Audiosavings product experts have tested this amp kit against the leading amp kits on the market. Here are the facts from our testing. The resistance per foot of this kit is extremely low compared to any other amp kit in its range. The other amp kits we tested it against had resistance ratings that indicated they were an 8 gauge amp kit. We were more shocked than anyone about these tests, because we used to sell some of those amp kits. (We now will not sell those any more after learning that they are not up to the quality standards of our installers). The conclusion is that Rockville does a great job manufacturing amp kits while other brands are deceiving consumers.

One other last thing worth noting about our kit compared to others. Our kit cosmetically looks the best. It has blue power wire, clear ground wire, and twisted pair RCAs with matching colors. This model includes set of RCA cables.

Features:

• Rockville RWK10 10 Gauge 2 Channel Car Amplifier Wiring Installation Kit
• 17 High Grade Twisted Pair of 100% Copper RCA Cable
• 17' 10 Gauge Translucent Blue SuperFlex Power Cables
• 17 18 Gauge Blue Remote Cable
• 17 16 Gauge Clear Speaker Wire
• 3' 10 Gauge Clear SuperFlex Ground Wire
• Gold Plated AGU Heat Resistant Fuse Holder
• 40 Amp ATU Inline Fuse
• 7 Split Tube Loom
• Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets
• Soft abrasion proof insulating jacket allows for 100% improved flexibility
• PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F

Product description

Slim 2ohm subwoofer; 450W max; 200W RMS @ 2ohm @ 100Hz ; 0dB-12dB bass boost; 35Hz subsonic filter ; 75Hz-150Hz low-pass filter; 0deg /180deg phase switch; PWM MOSFET power supply; Thermal protection circuit ; Adjustable input sensitivity; RCA

• Power: 550 Watts Max/ 200 RMS
• RCA Input/High level input
• Vega bass boost: 0-+12dB
• Remote control for subwoofer level
• PWM MOSFET Power Supply/Thermal Protection Circuit

User questions & answers

Question:	What all does the Subway for come with 4 wiring
Answer:	I had it professionally installed but i think a harness was in there
Question:	Will this subwoofer fit in the trunk of a 2012 Kawasaki Voyager and is the battery on the bike sufficient to power the sub
Answer:	Did Install it on Ford ranger 2020 super crew back to the sit and it fit very good
Question:	Do you have to run a remote power wire or does it have audio sensor to turn amp on
Answer:	Hi, This item comes with a remote wire and capable of receiving either high or low input. Once you turn on your engine and head unit,this will also turning on. Thank you for asking and hope this could help.

Product description

The SS8P is an all in one solution to give you great sounding bass in your vehicle without taking up a lot of space. This sub enclosure is only 2.8" thick so that it can easily fit under your seat. The amplifier is built in, so installation and wiring is clean and simple. This is a true all in one subwoofer solution with the subwoofer built into the enclosure along with a top of the line amplifier built in as well.



We focused on making installation a breeze so we designed this unit with you the customer in mind. We added high level inputs so you can install this to an aftermarket or factory system. The high level input allows you to install this even if you have no preamp outputs available.



The smart turn-on circuit will sense that an audio signal is present and turn on the amplifier. When you turn off your music signal the amplifier built into this subwoofer system will automatically turn itself off. Something else we did to make installation quick and easy is we put all the inputs and outputs on one side. This makes wiring neater and easier. Our competitor’s models are more challenging to install.



The SS8P has 400 watts of peak power and 100 watts RMS. This has great controls so you can adjust the sound to your liking. It has a level control for the volume and subsonic filter to filter out the really low frequencies which the human ear cannot hear. This also has a low pass crossover filter, phase control, input sensitivity, and bass boost.



Included is a remote bass knob, and mounting hardware but the best thing about our model is the sound. It is slim but it sounds like a full sized subwoofer If you are not happy with it we will offer you a 90-day money back guarantee. If you don’t like the sound, we will send you a pre-paid label and refund you in full!

• Rockville SS8P 8" 400w Slim Under-Seat Active Powered Car/Truck Subwoofer Sub.
• Enclosure is made out of cast aluminum which stays cool at all times.
• Peak Power Handling: 400 Watts. RMS Power Handling: 100 Watts. Heavy Duty Mounting Feet.
• PWM MOSFET Power Supply. Low Level RCA Input. High Level Inputs with Auto Turn-On Technology.
• Adjustable Input Sensitivity. Soft Delayed Remote Turn-On. Thermal Protection Circuit, Short Protection Circuit.
• Overload Protection Circuit. Green Power/Red Protect LED. Phase Switch: 0° or 180°.
• Low Pass Filter: 50Hz - 150Hz. Bass Boost: 0 - 12dB @ 45Hz. Built in Subsonic Filter @ 20Hz. THD: < 0.4%.

User questions & answers

Question:	Is it normal for the wired remote control to get smoking hot
Answer:	The remote on my unit hasn’t gotten that hot and I've been on 6hr trips with the unit running without any issues
Question:	It will fit in a vw golf mk7 spare tire
Answer:	Dimensions: 14.17” diameter x 5.7” height. These are the dimensions of the subwoofer, check the measurements of your car.
Question:	How would you hook up two
Answer:	With a RCA splitter
Question:	What all do i need to make it work
Answer:	Amp install kit is really all you need

Product features

Rockville SS8P 400 Watt Slim Under-Seat Active Powered Car/Truck Subwoofer Sub

The SS8P is an all in one solution to give you great sounding bass in your vehicle without taking up a lot of space. This sub enclosure is only 2.8" thick so that it can easily fit under your seat. The amplifier is built in, so installation and wiring is clean and simple. This is a true all in one subwoofer solution with the subwoofer built into the enclosure along with a top of the line amplifier built in as well.

We focused on making installation a breeze so we designed this unit with you the customer in mind. We added high level inputs so you can install this to an aftermarket or factory system. The high level input allows you to install this even if you have no preamp outputs available.

The smart turn-on circuit will sense that an audio signal is present and turn on the amplifier. When you turn off your music signal the amplifier built into this subwoofer system will automatically turn itself off. Something else we did to make installation quick and easy is we put all the inputs and outputs on one side. This makes wiring neater and easier. Our competitor’s models are more challenging to install.

The SS8P has 400 watts of peak power and 100 watts RMS. This has great controls so you can adjust the sound to your liking. It has a level control for the volume and subsonic filter to filter out the really low frequencies which the human ear cannot hear. This also has a low pass crossover filter, phase control, input sensitivity, and bass boost.

Included is a remote bass knob, and mounting hardware but the best thing about our model is the sound. It is slim but it sounds like a full sized subwoofer If you are not happy with it we will offer you a 90-day money back guarantee. If you don’t like the sound, we will send you a pre-paid label and refund you in full!

Features:

Product description

Description:



Color:black

Max output power: 600w / RMS:180W

Normal impedance:4Ω

Voltage: 12V

Frequency range: 20HZ-150Hz

SNR: >90db

THD: <0.4%

High level input sensitivity: 0.9v

Low level input sensitivity: 300mV

low pass filter:50-150Hz

bass boost: 0to+12db

Subsonic filter: 20Hz

Load: 40hm

Fuse rating: 25A

Subwoofer: 8”10”inch.4ohm

Dimensions: 345x260x68mm



Package included (Red or blue wire color,ship randomly) :



1 x active subwoofer

1 x drive-by-wire

1 x Power cord

1 x grounding OFC wire

1 x Audio line

1 x Control line

1 x Subwoofer high level input line

1 x Installation package

1 x user manual

（Note: The wires color may be different, any question, pls feel free to contact us)

• Fully functional and easy to debug
• 68 mm Slim fuselage, installed under the seat, the effect is better
• 10 inch woofer speaker
• Design of high temperature resistant coil
• Black paint stainless steel mesh, no rust, no deformation

User questions & answers

Question:	Do you need an amp to run this
Answer:	No it is not necessary your new under seat low profile quality sub comes equiped
Question:	Is this unit water proof
Answer:	I do not think it is waterproof it does not look waterproof it does not advertise waterproof and it goes under the seat in a vehicle so I don’t know why it would be waterproof but now it’s not waterproof it’s not all the way sealed up and the wire connections are all on the outside of the box so therefore water would be damaging
Question:	Do I have to buy an additional adapter for stock stereo
Answer:	Yes you do
Question:	Can i hook 6x9 up to this
Answer:	No

Product description

The incredible Rockville Rmw8a Micro enclosure ported subwoofer system of its Rockville subwoofer driver into an efficient tunnel system with a

slot-ported design. The high power handling and high excursion subwoofer is all that bass comes to you in a minimal amount of space – taking up less of

Rockville Rmw8a 8" 800W tunnel slot ported powered subwoofer enclosure Class d

built in amplifier

8” high power long excursion tuned subwoofer

cea power Rated 200 Watts/ 400 watts RMS/ 800 Watts peak

1.5&Rdquo; high temperature 4 Layer kapton voice coil

70 oz magnet structure weight

talc filled polypropylene Molded cone

linear Progressive spider suspension

stitched to cone double laminated surround construction: cnc-cut high-grade mdf

steel Mesh grill

remote bass knob included

nominal impedance: 4 ohm

frequency response: 30Hz – 500hz

spl: 96db@1w/1m

dimensions (w x L x H): 5.3&Rdquo; x 19” x 11”

• Rockville Rmw8a 8" 800W tunnel slot ported powered subwoofer enclosure Class D.
• Built in amplifier. 8" High power long excursion tuned subwoofer.
• Cea power rated 200 watts/ 400 watts RMS/ 800 watts peak.
• 1.5" High temperature 4 Layer kapton voice coil. 70 oz magnet structure weight.
• Talc filled polypropylene Molded cone. Linear progressive spider Suspension.
• Stitched to cone double laminated Surround. Extended pole piece technology.
• Construction: cnc-cut high-grade MDF.

User questions & answers

Question:	Can you run 2 of these on the same system
Answer:	I’d say yes from my experience. It helps support all five fingers as it gets support from the wrist with the Velcro hugging on it. It’s very supportive and encourages heavier lifts.
Question:	Anyone buy with the built in amp
Answer:	No, I'd say a little small. I ordered the size for my hands based on the measurement indicated. I was right in the middle of the range for my size. The hand portion fit fine, but the wrist is strangling tight too small. The size guide should also provide that measurement.
Question:	Do you need a head unit
Answer:	No, the wrist straps are only that. the padded palm does cover the palm from the fingers down to the bottom of the palm.
Question:	How does the small gauge power/ground/remote wire harness supposed to connect with the 4 or 8ga I have coming from my battery
Answer:	Yes without the paycheck!
Question:	Is this a single or dual voice coil
Answer:	It is touchscreen compatible with with your thumb also. It works for me
Question:	How much power
Answer:	Size chart. But pretty accurate.

Product features

Rockville RMW8A 8" 800 Watt Ported Powered Truck Subwoofer In Slim Enclosure

The incredible Rockville RMW8A Micro Enclosure ported subwoofer system delivers incredible output and infrasonic bass extension typically only possible from much larger systems. The key to this performance lies in the precise tuning of its Rockville subwoofer driver into an efficient tunnel system with a slot-ported design. The high power handling and high excursion subwoofer converts your amplifier's power into bass you can feel. What’s most impressive is all that bass comes to you in a minimal amount of space – taking up less of your valuable vehicle storage space.

The compact design, which measures less than 5.5” wide, 19” long and 11” high, allows it to be mounted into virtually any car or even compact truck. It works well under or behind the seat of pick up trucks, in car trunks, hatchbacks or SUVs. The RMW8A is built with extensive interior bracing and extremely rigid MDF materials to maximize the enclosure's internal volume while keeping the enclosure ultra stiff and very durable. The tunnel port wraps around the exterior walls of the enclosure to reproduce extremely low frequency tuning that delivers superior bass extension and ultra smooth response. The port entry and exit are flared to further enhance sound quality and minimizes air turbulence and noises through the vent.

This subwoofer system is shipped complete with woofer installed, wired, and ready to connect via a five-way binding post terminal. The enclosure is trimmed in a carbon fiber pattern wrap and high-grade automotive carpet with a “black on black” Rockville logo embroidery on the front baffle. A grill is also included to protect the subwoofer driver.

Peak Power = Amount of power the sub can handle for a burst during the loudest point during a song. This number is not as important as the RMS power. This subwoofer has 800 watts peak which is a lot of power for a compact 8" shallow subwoofer. Program RMS Power = The RMS power the way most middle of the road brands on the market rate their products. This sub can handle 400 watts program power. So for example a 400 watt RMS Hifonics amplifier will work perfectly with one of these.

If you want the best value for a shallow mount enclosed car subwoofer system and you want a great quality product that sounds great, and you also want hassle free return policies, then we highly recommend this Rockville RMW8A.

Features:

Product description

Rockville RW10CA 10" 800 Watts Peak/200 Watts RMS Slim Powered/Active Sealed Car Subwoofer With Bass Remote. Amplifier will not power up: Check to make sure you have a good ground connection, check that the Remote Input (Turn-On) has at least 5VDC, check that there is battery power on the (+) terminal, check that there is at least 12v, check all fuse, replace if necessary, make sure that the Protection LED not illuminated. If it is lit, shut off the amplifier briefly, and then repower it.

• Rockville RW10CA 800 Watt 10" Slim Car Subwoofer.
• 800 Watts Peak / 200 Watts RMS. PWM MOSFET Power Supply.
• Low Level RCA Input. High Level Inputs with Auto Turn-On Technology.
• Adjustable Input Sensitivity. Soft Delayed Remote Turn-On.
• Thermal Protection Circuit, Short Protection Circuit.
• Overload Protection Circuit. Phase Switch: 0° or 180°.
• Low Pass Filter: 50Hz - 150Hz. Bass Boost: 0 - 18dB @ 45Hz.

User questions & answers

Question:	Does this come with everything needed for installation
Answer:	Yes
Question:	does anyone know if it will fit under the seat in an 81 gmc k
Answer:	It should. The box is not too big. It fits in my 2002 Mercedes c240.
Question:	What are the true measurements of this thing? Can someone get out there with a tape measure because owners are reporting different numbers? Thanks
Answer:	No
Question:	Can i hook this up on a harley Davidson
Answer:	It is not ported...it's a sealed unit.

Product features

Rockville RW10CA 10 inch 800 Watt Slim Low Profile Active Powered Car Subwoofer

The RW10CA has 800 watts of peak power and 200 watts RMS. This model is CEA-2006 compliant which means the ratings are approved by a 3rd party so you can be 100% sure that this item will produce the power it says it will. This is one of the only slim underseat subs on the market that is CEA compliant.

Do not get fooled by other brands who write bogus power ratings that do not comply with any industry standard. Even if another unit says 2000 watts on it, ours is better and louder. If you are not happy with any Rockville product we will take it back within 30 days of when you receive it and refund you. We know our our products will satisfy you.

The RW10CA is an all in one solution to give you great sounding bass in your vehicle without taking up a ton of space. This sub enclosure is only 2.7 inch thick so that it can easily fit under your seat. The amplifier is built in, so installation and wiring is easy and clean.