8 best inch car subwoofers

Product description

These monster bass drivers rule in speed, sound quality, and SPL. Armed with a U.S.-made massive 3.25-inch aluminum Voice Coil former with a Flat wire wrapped edge wound style, it easily uses 2000 Watts RMS. With a 3-inch tall winding on the 12-inch Subzero, each of these have an astounding 4 inches of peak to peak travel, with the winding in the magnetic gap at all points of travel. The SubZero also boasts its TCT (Turbine Cooled Transducer) Coil and pole cooling technology, plus the PSP terminal block that allows stereo and mono impedance changes just by flipping fuses. You can now have the perfect combination of looks, performance, reliability, longevity, and ease of installation

• 12-inch car audio subwoofer - handmade in the USA
• 1000 Watts RMS, 2000 Watts Max
• Military-grade 3.25-inch aluminum, flat wire voice coil with 3-inch winding height
• Massive four inches of peak-to-peak cone travel
• TCT Technology (Turbine Cooled Transducer) for high efficiency output, plus exclusive 8-gauge PSP terminals

User questions & answers

Question:	What size amp should i to push two of them
Answer:	Looks like about 10 feet from USB to fuse box then about 3 feet from fuse box to end of pig tail. It is long enough for hidden installation in my full size truck.
Question:	Also will my ssl evolution 3000w mono push this sub? its a 1 ohm stable amp
Answer:	It is always on inpark mode. It does start recording whe someone or sonething get too close or it is bumped. It use very little power. You do need to changed you recording card to 32 or more.
Question:	I have the boss 5k watt amp if I hook all of them up to it will I blow the speakers
Answer:	Good afternoon Their is a special Cable you need to get from GARMIN that you would install that provides power from the Car when the ignition is in the off position. The on board GARMIN battery will not support the park mode If you have the Parking mode cable installed, and assuming that your car battery is in good shape you should have no issues with your car battery discharging. Hope this helps Be Well and Safe
Question:	How many Ohms is this
Answer:	No Assumes that your car battery is in good order. It works by monitoring movement and turns on when needed to record intrusion. However if I were going in a 2 week vacation I would turn it off just in case, as some of the newer cars have a number of systems that weight for your return etc. Hope this helps Have a happy and safe Christmas and a great 2018 .

Product features

Earthquake Sound SubZero-12

The Earthquake Sound SubZero Subwoofers are monster bass drivers that rule in speed, sound quality, and SPL. Armed with a U.S.-made massive 3.25-inch aluminum voice coil former with a flat wire wrapped edge wound style, it easily uses 2000 Watts RMS. With a 3-inch tall winding on the 12-inch SubZero, each of these have an astounding 4 inches of peak to peak travel, with the winding in the magnetic gap at all points of travel.

The SubZero also boasts its TCT (Turbine Cooled Transducer) Coil and pole cooling technology, plus the PSP terminal block that allows stereo and mono impedance changes just by flipping fuses. You can now have the perfect combination of looks, performance, reliability, longevity, and ease of installation.

• Two NEW **ROCKFORD FOSGATE P3D2-12** 12" 2400 Watt 2-Ohm DVC Car Audio Subwoofers
• 1200 Watts MAX per sub (2400 watts per pair)
• 600 Watts RMS per sub (1200 watts per pair)
• Anodized aluminum heat sinking cone and dust cap
• High temp voice coil with spun laced Nomex insulating reinforcement collar

User questions & answers

Question:	Does this come with the grills
Answer:	I’m 5’ 11” and it fits me. It might be too small for 6’ 6””.
Question:	What is the mounting depth
Answer:	Bonded leather
Question:	What is the best amp to use with both of the speakers hooked up? I bout them but i know nothing about them
Answer:	Yes. But it is very simple and I believe all tools are included it’s a perfect table for my 2yr old
Question:	Whats the mounting depth
Answer:	The set I purchased has 4 different primary colored chairs. The table has a clear protective finish.

Product description

SOUNDSTREAM T5.124 12" TARANTULA 2000 WATTS MAX DUAL 4-OHM SUBWOOFER BASS SPEAKER NEW In recent years, Tarantula subwoofers have evolved to meet various performance and placement goals, keeping our, the Soundstream fanatic, suggestions in mind. However, more often than not, we hear your calls to bring back a legend. For 2015, we're proud to re-introduce the old favorite, Tarantula T5. For this next generation, we made a few changes and several improvements. Improvements include direct connect wire leads, over saturated 12mm top plate and t-yoke and double-stitched cone to high density polyether foam surround for improved sound quality. Key components that you expect from T5 still remain; big ass 1,000w 3" voice coil, triple-stack magnet structure, high density Spruce pulp sub-cone, and the iconic black-on-black Soundstream spider.

• Overcompensating Motor Structure for Increased Magnetic Strength | 12mm T-Yoke and Top Plate Improve Low Frequency Dynamics | Vented T-Yoke and Frame Reduces Voice Coil Heat Build Up
• Non-magnetic Non-resonate Die-Cast Aluminum Frame | 3" 4-Layer Voice Coil with Direct Connect Wire Increases Power Handling | High Temperature Tolerance Adhesives Resist Thermal Failure
• Non-Transfer Spruce Pulp Cone with UV and Chemical Protection | Stitched and Glued Surround/Cone Joints for Strongest Bonding | Extended Excursion Polyether Foam Surround with UV and Chemical Protection | Dual Poly-Cotton Suspension Dampen Accelerations
• 1-pc Gasket / Trim Ring with Concealed Mounting Holes Included | RMS Power Handling: 1,000W | Max Power Handling: 2,000W | Voice Coil Impedance: 4-Ohm + -Ohm
• Mounting Depth: 7.25" | Optimum Sealed Box Volume: 1.50ft3 | Optimum Ported Box Volume: 2.50ft3

User questions & answers

Question:	Best amp to match with these? Want to make sure they get enough power
Answer:	Not yet, I haven’t owned this unit long enough, nor has it been hot enough of a weather here to cause such a thing.
Question:	What amp would you recommend for 2 subwoofers
Answer:	The Unit may fit your car/truck. However, you may need three aftermarket accessories to complete your installation: · Dash kit · Wire harness (Connects car wiring to stereo wiring) · Antenna adapter You will want to use MetraOnline's vehicle fitment guide to find the part numbers you will need. Metra has all these products for sale on Amazon.
Question:	What would be a great porter box for this
Answer:	The Unit may fit your car/truck. However, you may need three aftermarket accessories to complete your installation: · Dash kit · Wire harness (Connects car wiring to stereo wiring) · Antenna adapter You will want to use MetraOnline's vehicle fitment guide to find the part numbers you will need. Metra has all these products for sale on Amazon.
Question:	Tengo un monoamp jl audio 500/1. es suficiente potencia para 1 de estos
Answer:	103db which is pretty good. THD tends to be so low it is insignificant in brand name amplifiers. Power is 150W x 4ch.
Question:	What amp will work with two 12s
Answer:	I used size #4
Question:	Is this a shallow mount sub
Answer:	This is an AB class amp. If you want to run subs you should buy an D class amp.
Question:	I'll install sub with a mono amp. What's the difference between 2 ohms and 4 ohms sub? Can I use it with my amp
Answer:	I got it on a qpower chuchero two 10s with 2 tweeters, 1 channel for the 10s and the other for the tweeters regular nothing bridge and it overheats and goes on protection. No external fan btw. With the fan all day no problems.
Question:	What is the mounting depth
Answer:	1
Question:	Have a 13 Jeep Wrangler does this connect to the factory stereo without any problems. I have the sub in the back but looking for additional punch
Answer:	This will fit standard 8" boxes which should fit in your Explorer
Question:	Does this unit have good deep bass or more thump
Answer:	I would give these more than 250 rms a piece. If ur looking to connect 2 of them at 2ohm u should be good. If your connecting 2,500 ms should be good. And try to avoid wiring these at 1ohm. They will sound really good for about 1 hour or 2 then they will blow. I went thru 2 pairs before finding a good amount of wattage. If ur budget is 50 dollars per speaker. Try the skarix or the jbl gt series.
Question:	I have 14' jeep wrangler 2dr. Will this kit fit under the seat? and do I need to get the amp to install this
Answer:	short answer yes, long answer no. first, they are not marine subs, so there will be corrosion. second, they are not as stiff suspension as free-air/ ib subs, so for mechanical reasons, power handling is greatly reduced, especially in the lower frequencies, and should include the use of a ssf and eq slope. and last, any noise in the engine bay will be transferred through the cone. better off building a wakeboard rack style encolsure and a smaller sub, for more output.
Question:	It shows the power cable and fuse does it really come with these wires or will I need an amp kit
Answer:	Not sure. I wouldn't put it in anything honestly. This is the second planet audio radio with a screen and both have been junk. Wouldn't waste your money when you can get something twice as good for 50-100$ more
Question:	Can iconnect this to my Rockville rpg 10 inch bluetooth speaker
Answer:	I had the same question. Went to a couple other sites, and they all say Single DIN in both the title and description. My only thought as to why it would say Double Din in the description, assuming that it's not just wrong, is that because the faceplate is so large and hangs down below the rest of the deck, it would take up as much space as a Double DIN player would.
Question:	Will a 1100 watt monblock on 2 of these be ok
Answer:	no it can not the only way u can watch movies is by dvd and if u wanna watch while driving need to ground out the e break wireto chasis
Question:	I want to buy the box to replace the subwoofer for pyle 1000 watt and my question is if the box is compatible with my pyle 1000 watt
Answer:	Yes
Question:	Would a 2100 watt amp blow it
Answer:	Yes max rms on these subs are 500rms at a 1 ohm load so make sure you wire them at 1 ohm. The amp you specified has 1000rms at 1 ohm load so evenly distributes 500 to each. Just make sure you wire them correctly.

Product features

Pyle PLQB10 10-Inch 500 Watt Bandpass

• One 10'' High Power 4 Ohm Subwoofer
• Blue Polypropylene Cone
• Specially Treated Black Rubber Edge Suspension
• 2'' Aluminum Voice Coil
• Bandpass Alignment For Extra Deep Bass
• Plexiglass Front Window
• 500 Watts Max Power Handling
• Frequency Response: 30Hz-700k Hz
• Dimensions: 12''H x 12''W x 17''D

Product description

Pyramid PW1048USX 10-Inch 500 Watt High Performance 8 Ohm Subwoofer

• 500 WATT POWER: This high powered audio projection subwoofer system has a maximum power output of 500-watt peak power / 250 watt RMS so you can play your favorite tracks as loud as you want and with style
• NON-FATIGUING RUBBER SUSPENSION: The high-performance car woofer speaker has a non-fatiguing rubber suspension along w/ bumped & vented motor structure that completes your woofer enclosure system. Features 4.21” mounting depth for easy installation
• 2” KAPTON VOICE COIL: This car speaker has 2” high-temperature Kapton voice coil, 85.6 dB SPL and 8ohm impedance rating that compensates the undersized wire found in most cars. Ultimately reduces distortion so you can enjoy a crisp & clear sound
• 10 INCH PAPER CONE: Pyramid follows the standard size for most car stereo systems & created this 10" black strong non-pressed paper cone driver perfect for new speaker construction, replacing worn or blown speakers in your favorite loudspeaker cabinet
• 60 OZ MAGNET STRUCTURE: This subwoofer speaker has a 60 oz magnet structure. The heavy-duty housing along w/ the stamped steel basket that provides a strong foundation. It is also super easy to install to your vehicle's sound system

User questions & answers

Question:	Does this mean 2 subwoofers or
Answer:	If u do that the sub will take the power of the front and rear channel making your 4 door speakers weak and the bass will still over power your highs plus that amp is only really pushing out 5-600 rms
Question:	Will this work as a replacement for the Logitech Z-5500 sub
Answer:	Depends on the wattage of each speaker. Add the RMS(root means square) wattage of each speaker together, that will let you know of this amp will work for you. If the RMS is equal or less, this amp will work and is pretty awesome. If its higher the 2400.4 would work well. If you only have max wattage, subtract 20% of the max wattage value. That will get you in the ballpark of the RMS If you only have peak wattage, subtract 40% of the peak wattage value RMS is the most stable operating wattage for the speaker, getting close will give you max life and max sound quality at higher volume
Question:	are the speakers sold in pairs? is price listed ($30) for each? or for two
Answer:	Max 4 6×9 for good and louded audio or 6 6x9 for regular audio loud
Question:	Is this for sure 8 ohm? The picture says 4 ohm on the back of the magnet
Answer:	The Unit may fit your car/truck. However, you may need three aftermarket accessories to complete your installation: · Dash kit · Wire harness (Connects car wiring to stereo wiring) · Antenna adapter You will want to use MetraOnline's vehicle fitment guide to find the part numbers you will need. Metra has all these products for sale on Amazon.

Product description

Kicker 43CVT104 10 700 Watt 4-Ohm Car Stereo Subwoofer with Single Voice Coil

• 400 Watts RMS
• 800 Watts Max
• Unilateral,, system redirects heat away from motor structure
• Perimeter Venting
• Stamped Steel Basket

User questions & answers

Question:	What is the proper box size and air space for this sub. Air volume
Answer:	Dear sf, The camera plate is only sold in the kit. The complete kit is the 60195VA. If you have any more questions please call 1-800-835-0129 M-F, 8-5 CST. Thanks.
Question:	How many cubic feet required for a sealed enclosure
Answer:	Yes, the camera will install on just about any vehicle.
Question:	Is this spec for each speaker ( Impedance: 4 Ohm 150 Watts RMS/300 Watts Peak Overall) or total for the pair(which would be 75RMS/150 peak ea
Answer:	The monitor is to be wired so it only goes on when vehicle in backup gear. This dies work well for me. I have also noted that my camera turns on once in awhile briefly showing static and snow and then shuts back off. I didn't contact the company but guess I could have. It doesn't really bother me and feel it had to do with how the wiring was installed. I know I am not much help but at least you know you are not alone. My was installed by a car dealership.
Question:	Will they work without a amplifier
Answer:	2.4 wireless transmitter and receivermonitor:screen size: 4.3 inchesuniversal mount monitor back up camera screen system sits on your dashtft-lcd color monitorvideo color system: ntsc/palvideo sense input- turns on when video sognal is recievedcontrast: 350:1reverse camera priorty for signal sense power supply: dc12vcamera:super slim bar style camera420 line horizontal resolutionbuilt-in distance scale linelow luxresolution: 420 tv linesviewing angle: 170 degree auto white balancewaterproof (ip68) fog resistantvideo output: 1.0v pp-75 ohmpower supply: dc 12v** camera attaches to license plate***
Question:	How low of hertz can it receive
Answer:	I would also add to "GOne 2 WYD" great answer that its highly recommended to use zipties securing the line and tape on connections along with loom if the wires are exposed under your vehicle i.e. a pickup truck install. If you dont have a tail light wiring schematic, a simple DC volt meter can tell you which wire is "Ground" and which wire is "Reverse Positive".1. Engage your E-brake. 2.Turn your vehicle's key to "ignition power engine off". 3. Move shifter to reverse. 4. Test reverse light bulb harness at tail light assembly Once wires are identified (there's only 2 so its hard to mess up) put your vehicle back in park, power off, then splice connections. Either butt connections or a "poke and wrap" as described in "Gone 2 WYD" answer.

Product description

Lanzar Model : MAXP104D

Max Pro 10'' 1200 Watt Small Enclosure Dual 4 Ohm Subwoofer

• Black Non-Pressed Paper Cone

• Specially Treated Foam Edge Suspension

• Stamped Steel Basket w/Hex Key Input Terminal

• Bumped Vented Motor Structure

• Custom Designed Rubber Magnet Boot

• 2'' Dual Layer High Temperature Kapton Voice Coil

• 60 + 60 oz. Heavy Double Stacked Magnet Structure

• 1200 Watts Peak Power

• Dual 4 Ohms Nom. Impedance

• Fs: 50Hz, Qms: 4.92, Qes: 0.84, Qts: 0.72, SPL: 85(dB), Vas: 4.908(Cuft)

• Mounting Depth: 5.12"

Lanzar's MAX PRO-series speakers are designed with the professional in mind - and they'll push your audio to the MAX! This 10' small-enclosure sub with dual voice coils will add extra punch to your low-end and give you that huge sound you want. The sound is produced by a 2' dual-layer high-temperature Kapton voice coils with two 60 oz. heavy double-stacked magnets, pushing 1200 watts MAX power. It's all housed in a stamped steel basket with hex key input terminal for heavy-duty stability. And your booming sound is enhanced by the wide, non-fatiguing rubber suspension, specially designed rubber magnet boot, and the bumped and vented motor construction. Dual 4 ohm impedance.

From the Manufacturer

• 1200 WATT POWER: This car subwoofer has 1200 Watt peak power that will produce high sound resonance. It also has 60 + 60 oz. heavy double stacked magnet structure, hex key input terminals and dual 4 Ohm impedance
• FOAM EDGE SUSPENSION: Made with a specially treated foam edge suspension to keep equipment safe. Designed with bumped and vented motor structure for durability and easy installation.
• NON-PRESSED PAPER CONE: It is a clean-cut car subwoofer that boasts a black non-pressed paper cone. It will enhance car stereo by producing a powerful audio and keep equipment safe at the same time
• KAPTON VOICE COIL: The speaker subwoofer comes with a 2.5” dual layer high-temperature Kapton voice coil to resist corrosion. It has a stamped steel basket as well, with a sensitivity of 85dB and a special designed rubber magnet boot
• 5.12” MOUNTING DEPTH: Easy to install with its 5.12” mounting depth and fits most audio system for cars, boats or RVs. Included are the necessary cables, installation template and manual

User questions & answers

Question:	What box do u recommend. Sealed or ported
Answer:	They honestly sound horrible. I tried replacing my Sony speakers with these, and that was a huge mistake. They have very low sound quality and medium bass.
Question:	i have a 1000 watt mono Fosgate p1000..wld it be safe to run 3 of the 15's on it
Answer:	They’re 2 ohms but i have 4 in a grand marquis on a 2000 watt amp music is crisp
Question:	I have 2 of the 2000 watt max 15" and a planet audio vx4002 should i wire them in series for a 2 ohm load on both subs and amp
Answer:	I believe the Frontier accepts 5.25" or 6.5". Not 100% on this though. Nonetheless, be warned: these speakers weigh about 6 lbs. They're much heavier and deeper than many stock speakers. Modifications may have to made to accommodate the speakers so they don't interfere with the window track. and other parts in the door.
Question:	if i buy 2 of these speaker what amp would i recommend getting to put out some power
Answer:	Great product

Product description

Adventure around town accompanied by high-quality tunes. Bump up your current audio system with this Memphis Audio Power Reference Series 10-Inch 250-Watt RMS Dual Vehicle Subwoofer. The convenient design mounts into a 5-inch-deep area and is surrounded by treated paper cone with rubber surround for added protection. There's nothing better than a carefree cruise in your car with your favorite songs. Upgrade your car audio system to this high-performance dual 10-inch subwoofer. Feel the bass boom powered by peak 500 watts with 250 watt RMS power for reliable service. The 2-inch 4 ohm voice coil configuration improves efficiency diaphragms and includes magnet structures for optimal performance. Take your car audio to the next level with Memphis Audio Power Reference Series 10-Inch Dual Subwoofer. With proven performance and reliability, this subwoofer is built to last for years to come.

• DUAL SUBWOOFER: Upgrade your audio system to this high-performance amplified dual 10-inch subwoofer speaker
• RELIABLE SERVICE: Powerful peak performance offers reliable service at 500 watts and 250 watt RMS
• OPTIMAL PERFORMANCE: Equipped with 2-inch 4 ohm voice coil configuration for improved-efficiency diaphragms and magnet structures for optimal performance
• EXTRA PROTECTED: Treated paper cone with double-stitched butyl rubber surround with reinforced spider shoulder adds protection to subwoofer
• SHALLOW DESIGN: Features shallow design compatible with 5-inch mounting depth

User questions & answers

Question:	Mounting depth
Answer:	Although it doesn't specifically say anywhere on here, I do know that a darker material, and the tighter the weave (and these are solid silicone) means a higher protection.. So you are most likely as protected as you would be wearing a baseball cap..

• SOLD INDIVIDUALLY | GREAT SOUND BUILT FOR COMPETITION: Large Double Stacked 180oz High Energy Magnets, Die Cast Basket with Black Textured Finish, Kevlar Fiber Enhanced Non-Pressed Paper Cone with Textured Paint Finish and EROM Foam Surround with Red Stitching. The KILOX Series Subwoofers are the perfect choice for audio enthusiasts that demand high performance at low frequencies with only moderate power consumption.
• HIGH PERFORMANCE SUBWOOFERS: Dual 2 Ohm Impedance, Enhanced Cooling T-yoke Design with Black Anodized Finish, Kevlar Fiber Enhanced Non-Pressed Paper Cone with Textured Paint Finish, EROM Foam Surround with Red Stitching, Fiberglass Woven Dust Cap and 10 Gauge Power Cable with Direct Lead Connection.
• AMAZING DEEP BASS FOR ITS SIZE: the KILOX 12 Inch Subwoofer Car Audio Speaker will massively improve the sound quality of your car audio system. This 12" Subwoofer features 1000 Watts RMS Dual 2 Ohm to 2000 Watts MAX, 3 Inch 4-Layer Hi-Temp Voice Coils. It's truly a Great Car Audio Sub at an affordable price!
• CRANK UP THE VOLUME: Are you looking to upgrade your Factory Subwoofer? With our Enhanced Cooling T-yoke Design with Black Anodized Finish, 3.0" 4-Layer Hi-Temp Voice Coil, Double Stacked 180oz High Energy Magnets, Double Black Poly Cotton Spiders with Mirror Image Layout, Customized Rubber Gasket and Magnet Boot, it's guaranteed to impress.
• MASSIVE AUDIO QUALITY GUARANTEED: Since 1999, Massive Audio has been an industry leader in high performance audio products. Massive Audio laid its roots in high quality audio reproduction through in-house engineering and a dedication to customers. Buy today, risk-free!

User questions & answers

Question:	will a Rockford fosgate2500 be a good amplifier for a pair of kiloxx122 or
Answer:	I assume you mean the T2500-1bdCP but if not let us know what amp you have. Those are 2500 Watts RMS at 1 ohm so you would want 2 of the KILO Dual 4 ohm (2000 Watts RMS @ 1ohm) and yes that would power them with some head room.

Product features

KILOX SERIES SUBWOOFER

The KiloX122 is Dual 2 Ohm, 1000 Watts RMS 2000 Watts MAX and uses Black Anodized 3" 4-Layer Hi-Temp VC, 180oz Double Stacked Magnet, Kevlar Fiber Enhanced Non-Pressed Paper Cone with Textured Paint Finish. *Sold as each

Wattage

The MAX wattage is 2000 Watts for Burping and 1000 Watts RMS for Daily Driver.

Kevlar Fiber

Kevlar allows for a light weight yet durable cone which leads to higher SPL, sensitivity and more accurate tone.

Ohm

Dual 2 Ohm impedance lets you wire each subwoofer to a 2 or 8 ohm load / or for a Pair 1 ohm or 4 ohm final loads.

Great Sound Quality

Great Sound Quality: High quality materials and construction lead to amazing sound pressure levels with clear tonality.