12 best dual powered subwoofers
Dual powered subwoofers are a type of subwoofer speaker system commonly used in car audio and home audio setups. These subwoofers are known for their powerful bass output and built-in amplification. Here's what you should know about dual powered subwoofers:
Subwoofer Type: Dual powered subwoofers are typically component subwoofers, which means they are designed specifically for reproducing low-frequency audio (bass). They are not full-range speakers but are dedicated to handling deep, powerful bass frequencies.
Built-in Amplification: One of the key features of dual powered subwoofers is their built-in amplifier. This amplifier is designed to provide the necessary power to drive the subwoofer, ensuring that it can produce strong and accurate bass tones without relying on an external amplifier.
Size and Power: Dual powered subwoofers come in various sizes, typically measured in inches for the diameter of the speaker cone (e.g., 10-inch, 12-inch, 15-inch, etc.). The size of the subwoofer can impact its bass output. Larger subwoofers generally produce deeper and more powerful bass, but they may also require more space in your vehicle or audio setup.
Enclosure Type: Dual powered subwoofers can be housed in different types of enclosures. Common enclosure types include sealed (for precise and tight bass), ported (for louder and more boomy bass), and bandpass (a combination of sealed and ported for specific sound characteristics). The choice of enclosure type affects the subwoofer's sound quality and output.
Wiring and Connectivity: These subwoofers typically come with wiring options for connecting to your car's audio system or home audio receiver. They often have RCA inputs, speaker-level inputs, and controls for adjusting settings like volume, crossover frequency, and phase.
Installation: Installing a dual powered subwoofer in a car audio system may require some expertise in wiring and positioning. In-home audio setups, installation is generally more straightforward.
Frequency Response: Dual powered subwoofers are designed to reproduce low-frequency sounds, and their frequency response typically ranges from around 20 Hz to 200 Hz or higher. This wide range allows them to handle a variety of bass frequencies.
Sound Quality: The quality of sound produced by dual powered subwoofers can vary depending on factors such as the subwoofer's construction, amplifier power, and enclosure type. High-quality models can deliver deep, clear, and impactful bass, enhancing the overall audio experience.
Use Cases: Dual powered subwoofers are commonly used in car audio systems to enhance the bass output of the vehicle's sound system. They are also used in home audio setups, home theaters, and professional audio environments where powerful and accurate bass reproduction is desired.
In summary, dual powered subwoofers are specialized subwoofer speaker systems that come with a built-in amplifier. They are designed to reproduce deep bass frequencies and are commonly used in car audio and home audio setups to enhance the overall audio experience by delivering powerful and impactful bass. The choice of subwoofer size, enclosure type, and amplifier power should be based on your specific audio preferences and installation requirements.
Below you can find our editor's choice of the best dual powered subwoofers on the marketProduct description
The KS212C subwoofer represents the world’s first-in-class single-box active cardioid subwoofer solution for highly portable entertainment and installation applications. A breakthrough in innovation and design, The 3, 600 Watt KS212C subwoofer uniquely provides all the benefits of cardioid deployment in a single, compact enclosure. “Keeping bass in its place” for mobile entertainers, AV production and rental professionals, as well as modestly-sized performance venues, The KS212C subwoofer is unparalleled in its ability to manage low frequencies on the stage, or any application where undesirable low frequency energy needs to be minimized.
- A first-in-class single-box active cardioid subwoofer solution for highly portable entertainment and installation applications
- A breakthrough in innovation and design, the 3, 600W KS212C subwoofer uniquely provides all the benefits of cardioid deployment in a single, compact enclosure
- “Keeps bass in its place” for mobile entertainers, AV production and rental professionals, as well as modestly-sized performance venues
- Excellent in its ability to manage low frequencies on the stage, or any application where undesirable low frequency energy needs to be minimized
- Powered by a 3, 600W Class D amp, processed with the latest DSP tech, and featuring dual 12" long excursion drivers arranged in a 6th order band pass chamber
- These components all combine seamlessly to produce a staggering 15 dB more output at the front of the cabinet than at the rear
- Features comfortable aluminum handles and four rear-mounted casters, as well as two M20 sockets that accept a 35 mm loudspeaker pole in either horizontal or vertical orientation
User questions & answers
Question: | Listing shows weight at 90 lbs but item weight at 209.lbs. How can this be |
Answer: | Yes, the computer soundbar speaker has a control button to control the LED light independently. |
Question: | Hhow to use this sub with passive full range speakers |
Answer: | Hi,thanks for your question,the wired soundbar speaker have built-in microphone and headphone function make it handy for late-night movies or gaming. |
Question: | When plugged into the wall how many sos from the wall are required to power at full range ? Ac120v |
Answer: | I have three different units that I have used this mount with and it works for each of them. I have not tried it with the Hook 2-5, but I don't know why it wouldn't. The mount is the same width as the standard permanent metal bracket. I hope this helps. |
Question: | Has anyone compared this to the K Sub? Any thoughts |
Answer: | This is a suction cup. As such, movement of the boat at speeds greater than drifting usually pulls it off. Works best when at anchor. |
Product features
QSC KS212C
The KS212C subwoofer represents the world’s first-in-class single-box active cardioid subwoofer solution for highly portable entertainment and installation applications.
A breakthrough in innovation and design, the 3,600 Watt KS212C subwoofer uniquely provides all the benefits of cardioid deployment in a single, compact enclosure. “Keeping bass in its place” for mobile entertainers, AV production and rental professionals, as well as modestly-sized performance venues, the KS212C subwoofer is unparalleled in its ability to manage low frequencies on the stage, or any application where undesirable low frequency energy needs to be minimized.
Features
Powered by a 3,600 Watt Class D amplifier, processed with the latest DSP technology, and featuring dual 12-inch long excursion drivers each arranged in a 6th order band pass chamber, these components all combine seamlessly to produce 15 dB more output at the front of the cabinet than at the rear. Highly portable, the cabinet features comfortable, aluminum handles and four, rear-mounted casters.
Product description
Add a Tower of Bass to your home theater system! This Monolith THX Ultra Certified subwoofer sets the standard for bass output, low distortion, and affordability. With chest thumping bass that plays down to well under 16Hz, the Monolith THX Ultra Dual 15in Subwoofer unleashes cinema level volume with the ability to convey and articulate the subtle nuances of music.
- THX Ultra Certified: Add a Tower of Bass to your home theater system! This Monolith THX Ultra Certified subwoofer sets the standard for bass output, low distortion, and affordability. With chest thumping bass that plays down to well under 16Hz, the Monolith THX Ultra Dual 15in Subwoofer unleashes cinema level volume with the ability to convey and articulate the subtle nuances of music.
- Dual 15in woofers: The Monolith 15in driver was developed from the ground up, with a design focus on achieving output, accuracy, dynamics, and linearity, while minimizing distortion. It is enclosed in an HDF cabinet with massive internal bracing. The cabinet features a large, slot-shaped port at the bottom, which can closed using the included foam plug to run the subwoofer in full sealed mode.
- 2000-Watt amplifier: The 2000-watt (RMS)/3600-watt (peak) amplifier is built around a Texas Instruments 48-bit data path (with 28-bit filter coefficients) DSP engine. Each amplifier's transfer function, power output limiting, and thermal protection are monitored to the millisecond and are customized for each individual driver. The high efficiency Class D amplifier modules are based on a proven topology that has been continuously refined over the past 4 years. The amplifier has vast reserves of
- THX Ultra Certified products bring the cinematic experience to large home theaters (3000 cubic feet) with a viewing distance of 12 feet or greater from the screen.
- The Monolith subwoofer amplifier has an extraordinarily high power output of 2000 watts RMS (3600 watts peak), which can deliver massive amounts of power when needed. Each Class D amplifier is built around a Texas Instruments 48-bit data path (with 28-bit filter coefficients) DSP engine, allowing virtually unlimited design flexibility with the assurance of no signal degradation. Each amplifier's transfer function, power output limiting, and thermal protection are monitored to the millisecond and
User questions & answers
Question: | Can't I be placed horizontally |
Answer: | The total power of the pc speakers is 6W, each one is 3W. |
Question: | Has anyone listened to both this and the svs pb16? i've seen the numbers but i'm curious how they compare in real life |
Answer: | Simply plug in the USB port for power and plug the pink cable for mic and the green cable for headphone.Dial the knob for turn on the speaker and the speakers ready to work. It does not support Bluetooth or wireless connection. |
Product features
Monolith M-215 Dual 15" THX Ultra 2000-Watt Powered Subwoofer
Add a Tower of Bass to your home theater system! This Monolith THX Ultra subwoofer sets the standard for bass output, low distortion, and affordability. With chest thumping bass that plays down to well under 16Hz, the Monolith THX Ultra Dual 15" Subwoofer unleashes cinema level volume with the ability to convey and articulate the subtle nuances of music.
Cabinet and Internal Bracing:
THX Ultra
Add a Tower of Bass to your home theater system! This Monolith THX Ultra subwoofer sets the standard for bass output, low distortion, and affordability. With chest thumping bass that plays down to well under 16Hz, the Monolith THX Ultra Dual 15" Subwoofer unleashes cinema level volume with the ability to convey and articulate the subtle nuances of music.
Dual 15" Woofers
The Monolith 15" driver was developed from the ground up, with a design focus on achieving output, accuracy, dynamics, and linearity, while minimizing distortion. It is enclosed in an HDF cabinet with massive internal bracing. The cabinet features a large, slot-shaped port at the bottom, which can closed using the included foam plug to run the subwoofer in full sealed mode.
2000-Watt Amplifier
The 2000-watt (RMS)/3600-watt (peak) amplifier is built around a Texas Instruments 48-bit data path (with 28-bit filter coefficients) DSP engine. Each amplifier's transfer function, power output limiting, and thermal protection are monitored to the millisecond and are customized for each individual driver. The high efficiency Class D amplifier modules are based on a proven topology that has been continuously refined over the past 4 years.
15-inch Driver
Every part of this driver has been developed from the ground up and customized to deliver high output, low distortion, and accurate bass. Our unique hybrid cone combines long fiber pulp and fiberglass, taking advantage of the pulp's superior stiffness with the additional rigidity and lightweight properties of fiberglass, to deliver a driver of massive durability and excursion. The result is a cone that achieves optimal motion at all frequencies it is asked to produce and beyond.
Lower Suspension: FEA (Finite Element Analysis) modeling and Klippel laser based optimizations were used to design a cone that is capable of astounding >90mm peak-to-peak excursions.
Spider and Cone Venting: The spider is made from multiple layers of NOMEX with integrated tinsel leads hand stitched in place for low mass with high strength and durability. The purpose of these vents are twofold -- first, they allow convective air flow to cool the voice coil and, second, they reduce asymmetrical compliance due to air compression under the cone/spider, which would appear as unwanted distortions.
Woofer Surround: FEA (Finite Element Analysis) modeling and Klippel laser based optimization were utilized to create this durable, high profile surround that’s made from a unique formulation of NBR (NITRILE RUBBER-acrylonitrile-butadiene copolymer).
Motor Structure: The motor is made of CNC milled low carbon steel in the modified undercut "T" pole assembly to focus the magnetic flux. Dual aluminum shorting rings are used to cancel eddy currents, further stabilizing the magnetic flux and significantly lowering distortion.
Product description
This Package Includes SB-1000 300 Watt DSP Controlled 12" Ultra Compact Sealed Subwoofers SB-1000 300 Watt DSP Controlled 12" Ultra Compact Sealed Subwoofer Like a stick of dynamite the SB-1000 300 Watt DSP Controlled 12" Ultra Compact Sealed Subwoofer is easy to conceal but its impact is hard to ignore. It's the most SVS bass that can be condensed into a 13" package. When it's time to party your music comes to life bass lines are tight and drums are never muddy. Elegantly finished in premium black ash gloss piano black or gloss piano white it fits with any dcor. And yet it's small enough to tuck in a corner if you need to keep it out of the way. To maximize the slam and impact of your home theater (with a minimal footprint) two SB-1000s can be paired one on either side of the room. For big movie and music enjoyment in a small package go with the SB-1000. Sledge Amplifier STA-300D The Sledge STA-300D amplifier packs technology and sophistication not found anywhere else at this price point. This amp features a highly advanced DSP processor offering unmatched control over the subwoofer at all drive levels for the ultimate in refined behavior. The control knobs are actually digital actuators for precise and noise-free adjustment. SVS 12" High Output Driver With SVS compact and affordable doesn't mean compromising on performance. The 12" driver in the SB-1000 pumps out loads of deep and powerful bass with low distortion for smooth and accurate performance on music and movies. FEA-optimized motor for low distortion Long-throw suspension for high output at deep frequencies High-power voice coil for excellent thermal management Lightweight 12" cone for enhanced sensitivity and transient response Rubber surround for durability and long life What's in the Box SB-1000 300 Watt DSP Controlled 12" Ultra Compact Sealed Subwoofers 6 foot power cords Specifications SB-1000 300 Watt DSP Controlled 12" Ultra Compa
- SB-1000 300 Watt DSP Controlled 12" Ultra Compact Sealed Subwoofer (Premium Black Ash)
User questions & answers
Question: | It is a pair (2 subs) right |
Answer: | Not sure. At no point does this product weigh 209 |
Question: | is this 220-240v |
Answer: | This sub has a built in crossover, so your main out would go into this sub, then out to your amp for your passive speakers. |
Question: | where is it made |
Answer: | Sorry I do not have answer for you. |
Question: | How is it paired with Vanatoo T1's |
Answer: | I used to own a KSub - these are *far* better. |
Product features
SB-1000: Impressive deep, clean SVS-bass in an inconspicuous 13 inch cabinet.
Like a stick of dynamite, the SB-1000 is easy to conceal—but its impact hard to ignore. It’s the most SVS-bass that can be condensed into a 13 inch package. Pumping out loads of fast, clean, bottom end—action-scene punches hit you right in the gut. When it’s time to party, your music comes to life—bass lines are tight and drum beats never muddy. Elegantly finished in premium black ash or gloss piano white, it fits with any decor. And yet, it’s small enough to tuck in a corner, if you need to keep it out of the way. To maximize the slam and impact of your home theater—with a minimal footprint—two SB-1000s can be paired—one on either side of your room. (Special discount available.) For big movie and music enjoyment, in a small package, go with the SB-1000.
Sledge Amplification – Intelligent & Sophisticated Power
Our Sledge STA-300D amplifier packs technology and sophistication simply not found anywhere else at this price point. Conservatively rated at 300 watts (720 watts peak dynamic), this amp features a highly advanced DSP processor offering unmatched control over the subwoofer at all drive levels, for the ultimate in refined behavior.
SVS 12 inch High Output Driver
With SVS, compact and affordable doesn’t mean compromising on performance. The 12 inch driver in the SB-1000 pumps out loads of deep and powerful bass with low distortion, for smooth and accurate performance on music and movies.
Premium Finishes, Handsome Styling, Versatile Placement, Easy Integration
With attractive premium finishes of black ash, piano gloss black and piano gloss white with color-matched cloth grilles, the SB-1000 has the styling to match its remarkable performance. At 13 inch on all sides, the compact SB-1000 is incredibly easy to integrate into any living space.
Product description
A full suite of User Controllable DSP driven by the SRX800 Series powerful onboard 400MHz Sharc DSP includes 20 PEQ’s, 2 seconds of delay, signal generators, Input mixing, amplifier monitoring, and 50 User Presets. In addition, the system can incorporate V5 JBL Tunings providing compatibility with our flagship Vertec and VTX touring systems. An integrated LCD screen supports fast setup and configuration.
- Premium JBL Transducers
- Rugged, versatile enclosures
- Tunings available for Crown amps and DBX signal processors
- Fully supported in Audio Architect
- Power Handling: 3200W Peak, 1600W Program, 800W Continuous
User questions & answers
Question: | What kind of wheels casters do you need for those speakers |
Answer: | Pretty sure it's made in the USA. Here is their customer service number: 877.626.5623 |
Question: | Will this work with Bose 802 system |
Answer: | Sounds great. Very tight and powerful bass because they are not ported. The Vanatoo's sound great by themselves, but with a sub like this they really rock. |
Question: | What kind of electrical prong does it use? Can't really see in the pic |
Answer: | This can be placed horizontally. |
Question: | Can I use this for my home stereo, in 14’ by 25’ living room |
Answer: | I apologize for your inconvenience. We do not have that information. |
Product features
JBL SRX828SP
SRX828SP is a portable, self-powered, two-way, 18” subwoofer for a variety of uses. It has been designed to deliver class leading performance in a variety of applications including small and medium-sized installations and tours. When used in conjunction with the SRX800 full range systems and other SRX800 subs, SRX828SP is an integral part of a high performance, fully configurable loudspeaker system. Tunings and presets are available for Crown ITech HD and XTI 2 amps as well as dbx VENU360 signal processors.
Built to last
With best-in-class 18mm wooden enclosures, 14-gauge steel grilles, and JBL's Patented DuraFlex finish, SRX800 speakers are built to last and withstand a lifetime of hard tour use.
Purposeful design
Every detail in the SRX800 Series was purposefully designed and thought through with full consideration for its intended use. Ergonomically designed handles support an easy, non-fatiguing grip for streamlined handling. M10 suspension points, indexed feet, and pole/tripod mounts support a wide, flexible array of configurations.
Transducer technology
JBL’s patented Differential Drive Technology ferrite drivers incorporate 3” voice coils with lower mass ferrite magnets for reduced weight, increased power handling, exceptionally low distortion and extended low frequency response. JBL’s 2432H is the only neodymium 3” voice coil compression driver in this class, delivering very high power levels and smooth, crystal clear sound.
Product description
The BassLink line includes everything you need for great bass in your car, with no hassle. This system includes a round 10-inch woofer, a round 10-inch passive radiator and a 200-watt Class D amplifier, plus all the controls you need to integrate its sound with your existing system. It can be mounted vertically or horizontally for easy placement in any car.
![]() Everything you need for great bass in your car, with no hassle. Click to enlarge. |
![]() Remote level control included. |
![]() Mount BassLink vertically or horizontally. Click to enlarge. |
Designed to deliver low frequencies in virtually any car audio system, BassLink truly has universal appeal. Small in size but big in output, BassLink requires a mere .75 cubic feet of trunk space yet produces enough bass to wake up the neighborhood.
BassLink consists of a 10-inch subwoofer, 10-inch passive radiator and a 200-watt Class D amplifier housed in a rigid polymer enclosure, all carefully engineered to work together as a unique, integrated system. The extremely versatile BassLink accepts both speaker- and line-level inputs, and it provides an internal low-pass filter, proprietary signal processing and abundant amplification.
The BassLink system features a servo-control circuit that continually monitors the voice coil's position in the magnetic gap and prevents the distortion that occurs when a conventional woofer is overdriven. By integrating cone-excursion information with the instantaneous demands of the music, BassLink can extract loud and deep bass from an enclosure smaller than any before.
BassLink includes a fixed, 2nd-order, high-pass filter that eliminates the possibility of over-excursion below Fb, the resonant (tuned) frequency of the vented box. This allows the excursion-monitoring circuit to focus on the excursion at the more meaningful frequencies at and above Fb. The result is a significant increase in bass output.
User-adjustable controls allow listeners to set the system's response to achieve optimum performance based on the vehicle's cabin gain or transfer function. These controls include: a 0- or 180-degree phase switch; a continuously variable electronic low-pass filter that is adjustable between 70 and 100Hz; variable input sensitivity; and Bass EQ that provides for adjustments between +3 and -6dB. BassLink's frequency response in a typical vehicle is 20 to 100Hz (+/-3dB), but this varies according to the vehicle and user adjustments. At maximum gain, the system can accept inputs as low as 250mV.
BassLink can accept up to four channels of input--to provide nonfading bass--either from line-level signals through four RCA jacks or from high-level signals through a pair of Molex connectors, allowing BassLink to be easily connected to OEM systems. If using the speaker-level inputs, an audio-sense circuit will turn on the amplifier whenever a signal is present. If the RCAs are used, a 12-volt, remote-turn-on lead is required. The system has barrier strip connections for power, ground and remote turn-on.
What's in the Box
Infinity Basslink 200-Watt Powered Subwoofer System (Black), Bass level control, Wiring harnesses, Mounting feet, Mounting bolts, Instructions
- Powered subwoofer with onboard 200-Watt Class D amplifier
- Variable electronic crossover (50Hz to 120Hz), sensitivity, and bass-boost
- 10-Inch subwoofer and 10-inch passive radiator
- Variable Bass EQ (+3db to -6 db at 45Hz)
- Includes Basslink LC remote bass-level control
User questions & answers
Question: | What size amp wire are you using? Thanks |
Answer: | Standard 3 prong plug in. Nothing special. And they Rock !! |
Question: | What are the actual demisions of this unit |
Answer: | This is designed more for a 140' by 250' living room.... I'm guessing that, if you have 2 grand to spend on a sub, and have to ask this question... Return the stolen money. |
Question: | Would it still sound good if put in a trunk or would i want something more powerful |
Answer: | Thanks very much for your question. Yes, this listing is for a pair of the SB-1000 subwoofers. World Wide Stereo is 40 years old and a proud, authorized SVS dealer. |
Question: | Does it hit |
Answer: | No. It’s a 120v plugs right into your wall outlet in your home. |
- [Shake up the Sound] A powerful 8” dual-woofer subwoofer that delivers stunning bass to home theaters and media/gaming rooms
- [Up to 300W of Power] Handles up to 300W of power for bass that is powerful, smooth, and extremely accurate
- [Dual Woofer Design] Unique dual woofer design includes an active and passive woofer to maximize sound performance
- [App-controlled DSP] App-controlled Digital Sound Processing enhances bass and ensures extremely low distortion
- [Efficient Sonic Purity] Consumes less than 0.5 Watts in standby while gold-plated inputs ensure the highest quality sound transfer
User questions & answers
Question: | can you plug this in a vizio sound bar |
Answer: | for a trunk you need more powerful,for an open cabin its fine. its a great clean sub, it will never allow itself to distort , for a bass boost use this, if you need earth shaking, move on, however, for me this is swimmingly great |
Question: | If you use the speaker level in and outs, is the crossover still Variable |
Answer: | Depends on how you define a "hit" I guess. I don't listen to much rap or bass-masters type of music, but I do listen to progressive hard rock and heavy metal along with pop and top 40. The new Queensryche has some excellent lows as do a couple Ozzy tunes. "Rain" by Madonna is what took out my other sub that I'd had for years as it's just a steady rumble, that's the type of stuff I like. I have 2 12"s in my wrangler with 500watt bridged amp and they aren't nearly as tight and clean sounding and I probably spent 3x the money on them. |
Question: | I purchased the PS12 12inch what is the correct break-in for this subwoofer and how long will the break-in take |
Answer: | 098765 is the squ 79.99 |
Question: | Seems like these reviews are for every sub that osd makes. does anyone have their ss-8 low-profile sub? how do you like it? any rattles |
Answer: | Is it an 802 series 2, 3, or 4 ?? |
Product features
Variable Size Range
We want you to have options, and with multiple size ranges from Single 8”, Dual 8”, and up to 12”, we have the right size subwoofer for your needs.
In-Wall to Floor Standing Designs
Some customers would rather hear than see their subwoofer, which is why we offer sub options from a discreet trimless in-wall to powerful floor standing designs.
Bold Deep Bass
Enjoy deep, smooth, low bass to deliver extreme sensory pleasure to your Home Theater, Media Room, or 2 Channel Stereo System.
High-Power Handling
Our subs offer efficient high-power handling for optimal sound output. Improve otherwise thin-sounding speaker setups with spine-tingling bass notes.
OSD Audio 8" Dynamic Powered Subwoofer 300W
OSD Audio’s Nero DualX8DSP is a powered stand-alone subwoofer that reproduces extremely realistic bass for home theaters, media rooms, high-end listening spaces, and gaming rooms. Operating with 300 Watts of dynamic power, the Dual X8 DSP includes one 8” active woofer and one 8” passive woofer for optimal sound as well as the latest Digital Sound Processing technology that can be controlled through a smartphone or tablet.
Product description
The Rockville Ground Pounder is what we believe to be the loudest powered car subwoofer on the market. In addition, it is fully loaded with all the best features.Power that will shake the ground!The Ground Pounder is extremely powerful! It puts out 800 watts peak and 200 watts RMS! But more importantly, then the watts is the high-efficiency woofer. This Subwoofer system is engineered for high SPL output. Although very musical at lower volumes, at higher volumes this system will be vibrating your mirrors with bass you can truly feel.A full edge surround is used on the subwoofer integrating it into the enclosure so there is no wasted space. This leads to more cone space and thicker surroundings resulting in more excursion and higher SPL! The enclosure has 2 x 10.5” woofers built-in. One main woofer and one passive radiator. The woofer has a 2” voice coil and a 55 Oz magnet.Integrated AmplifierThe subwoofer enclosure has a built-in integrated class A/B amplifier. Class A/B gives the purest sound quality when compared with class “D” or any other type of amplifier.Bolt-down mounting system with quick-disconnectIncluded in the box is all the mounting hardware and screws you will need so you can bolt down and secure the subwoofer into your trunk. The quick disconnect system allows the subwoofer to easily disconnect from the mounting kit if trunk space is needed.Compact Die-cast aluminum enclosure:This is one of the only subwoofers on the market that comes pre-mounted into an aluminum enclosure! The aluminum enclosure makes this system extremely durable. The compact size compared to the power this system delivers is truly a game-changer. Now you don’t need to sacrifice as much trunk space in order to deliver ground shaking bass!Easy to integrate:We included standard low-level RCA inputs for use with an aftermarket car stereo that has RCA outputs.
- Includes: Subwoofer, Remote, Installation mounting bracket, Hardware connection screws, Manual
- Features: Rockville Ground Pounder 800w Powered Dual 10" Car Subwoofer in Aluminum Enclosure, Size: Dual 10.5” woofers, Peak Power: 800 Watts, RMS Power: 200 Watts, Die-Casting Aluminum Housing, 10.5” Subwoofer, 10.5”Passive Radiator Subwoofer, Single 2 Ohm
- 2” CCAW Voice Coil, Foam Surround, Full edge surround gives more surface area to support more excursion and higher SPL, Subwoofer is integrated into the enclosure rather than being 2 separate units. This is engineered to give you ground pounding bass, Includes an easy to install bolt-down mounting kit, Polypropylene Cone, Polypropylene Dust Cap, Matte Black Custom Molded Metal Grille, 55 oz Ferrite Magnet
- Class AB Amplifier Produces Amazing Sound Quality, High Speed MOSFET Power Supply, Low Level &High Level Inputs, Auto turn on (on/off selectable), Input mode: Select either Low level RCA inputs or High speaker level inputs, Easily detaches from the mounting kit if you need extra cargo space, Phase switch: 0 to 180 degrees, Gain control: 100mV to 4V with line input and 250mV to 10V with speaker level input, Bass equalizer: from 0 to +12 dB (centered at 50 Hz)
- Adjustable crossover frequency: (variable from 50 Hz to 150 Hz @ 12 dB/octave), Frequency Response: 30Hz - 150Hz, Sensitivity: 93dB @1W 1M, THD :90dB, Input sensitivity: Low Level : 0.1 V , High Level:0.25V, Power (Blue) &Protect (Red) LED Indicators, 25A Fuse, Dimensions (H x W x D): 10.7” x 13.4” x 8.74” (271 x 340 x 222 mm)
User questions & answers
Question: | If I’m connecting to a factory radio, do I need a line out converter |
Answer: | My 8 inch subs toke about 2 weeks |
Question: | Does this play audio as well or just bass |
Answer: | I have the 8” mounted behind a shallow above refrigerator cabinet. It’s not optimal for acoustics but it’s purpose is to add bass to Yamaha 8” ceiling speakers that lost bass due to ceiling enclosure in my kitchen. For the task.... they are more than capable. The bass is really nice but this is just a review for listening to music. I have the gain set at like 40% For only 95hz and below freq. The bass is good enough that I’ve added the sub to my 1st floor whole home audio group and the sub adds bass to all the google google assistant speakers on the same floor without the Yamaha ceiling speakers running. This sets a nice ambiance for entertaining. I am actually considering two of these under my sofa for my theater setup to replace a single 10” big box sub. |
Question: | Where do the the RCA cables hook up at i dont see anywhere in the pictures |
Answer: | 10 ga. is enough for the sub with the length of run I'm doing, but I have REAL 8ga copper (not CCA-Copper Clad Aluminum) cable running from the battery to a distro block under the passenger seat, then splitting 8 ga. to the Alpine amp and this powered unit. Same with the ground. Beware of that crap cable you see selling cheap here, eBay, etc... |
Question: | Are there any wire kit or where do I get a wiring kit for this product |
Answer: | According to the Infinity BassLink Owner's Manual - 14-1/2" x 12-1/2" x 8-1/2" (369mm x 318mm x 216mm) |
Product features
Rockville Ground Pounder 800w Powered Dual 10" Car Subwoofer/Aluminum Enclosure
Includes of GROUND POUNDER:
- Subwoofer
- Remote
- Installation mounting bracket
- Hardware connection screws
- Manual
Product description
Planet Audio AC10D Car Subwoofer - 1500 Watts Maximum Power, 10 Inch, Dual 4 Ohm Voice Coil, Easy Mounting, Sold Individually
- CONE: Made from Polypropylene, the AC10D 10-inch car subwoofer provides a resilient and durable material that can offer great sound with the advantage of long-lasting subwoofers
- SURROUND: Foam is very flexible, providing the subwoofer with higher efficiency. This also translates to better excursion. (How far the cone of a speaker linearly travels from its resting position)
- VOICE COIL: Our voice coils are able to withstand high temperatures yet maintain its strength and fatigue properties. making our voice coils with this material, gives our speakers the advantage of longer play times with lower weights
- STAMPED BASKET: The stamped basket offers a strong and rigid platform allowing the listener to hear clean and clear music output
- SPECIFICATIONS: Resonant frequency - 39 Hz, Sensitivity SPL (1W/1m) - 87 Db, Depth 11” x Width 11” x Height 5.3”
- WARRANTY: Planet Audio provides a powerful 3-year platinum online dealer warranty so long as the purchase is made through Amazon.com. We strongly encourage professional installation of this product to ensure proper and safe functionality
User questions & answers
Question: | How many does this item come with 1 subwoofer?? Or 2 subwoofers |
Answer: | This speaker has high and low level inputs. High level inputs meaning speaker wire input and low level input meaning rca connections. In the box there is a wiring harness for the subwoofer. That harness has power, ground, remote, and speaker wires. Depending on your installation you can just tap into your rear speakers wires and run the new wires to the high level inputs (which are the speaker wires in the harness) or you can use the rca connectors (these came in my box it's speaker wire on one end which you tie into the speaker wires in the harness and a single rca on the other end. So either way you're good to go and honestly this subwoofer is impressive. I put this in a 2013 explorer and it pounds! Super clear too! Very easy to install! |
Question: | Will this fit a 2002 explorer |
Answer: | The wiring kit is solid separately. Get something that can handle a 800 watt peak capable kit. Rockville does sell amp wiring kits off their website, you can look it up off Amazon's site via part number. I went to Walmart and got a kit that can handle it for 25 bucks. |
Question: | What is the true rms? looking to hook it up to a pioneer 1000watt 300rms amp |
Answer: | What type of outputs does the soundbar have? If they're RCA and labeled something along the lines of "sub out" then you can. |
Question: | can these subs be mounted Open Air and still have decent sound? I need somw subs for my boat, they would mount on the engine hatch |
Answer: | Yes. That's realistically the only reason you would use speaker-level inputs, to have an adjustable crossover for situations where the upstream electronics don't offer it. |
Product features
ANARCHY AC10D
A new subwoofer must go through a short but important process of 'break-in' before it is run under harsh conditions. This will ensure the performance as it has been designed to. The process involves subjecting the subwoofer to no more than low-to-medium volume levels for a number of hours in the enclosure. This will loosen the suspension to prevent the voice coil from overheating. Over-driving the woofer before it has been broken-in, will result in premature failure and poor performance.
- Features of RG212CA v2: Rockville RG212CA v2 Dual 12" Slim Vented Powered Car Subwoofer Enclosure, Complete all in one system includes built in amplifier, top quality enclosure, and dual 12” subs, Vinyl finished enclosure with side vents tuned to 40Hz, Enclosure is built with ¾” MDF and is ribbed and braced, 2000 Watts Peak power output, 500 Watts RMS, 12“ Super-Slim Subwoofer, Ultra-Stiff Composite Pulp Cone with Kevlar Reinforcement, 3D Molded Acrylic Dust Cap, Expanded & Rolled Steal Basket
- High Density Laminated Rubber Surround, High Power Strontium Magnet with Ultra Saturated High BL Motor Structure, Vented Core Magnet Motor Structure, 2” High Temperature Aluminum Voice Coil, 8 mm Washer & Yoke Plates, 13.6 mm Peak-to-Peak X-Max, 40 oz. Magnet, Slim Vented MDF Enclosure Design, Impedance: 4-ohms, Frequency response: 30Hz-500Hz, SPL @ 1w/1m: 89dB, Dimensions: 29.52" Length x 15" Height 4.37" Top Depth x 6.65" Bottom depth, Unit Weight: 40.12 Lbs
- Amp Features: Built-in 500 Watts RMS / 2000 Watt Mono Block Amplifier, 2 Ohm stable amplifier, Class D amplifier, Extruded aluminum heatsink stays cool even at high volumes, 200mV – 5V Variable Input Level
- 12dB Low Pass Crossover Frequency 50Hz-200Hz, Low Level RCA Inputs, Remote level attenuation: 0 to -32.2 dB, 3.7 second turn on delay, High Level Speaker Level Input with Auto Start Music Sense, RJ11 Jack for Dash Mounted Bass Remote
User questions & answers
Question: | Dose this come with everything |
Answer: | No it doesn't you need to get power wire. Ground wire. REMOTE wire. Rca wire. And a fuse holder |
Question: | Will it ruin the speakers and/or sub if I connect the remote to the amp while using the high level input connection |
Answer: | Yes, twice in the wiring guide it states WARNING: Do not use Remote Turn-on (REM) when using High Level inputs. The guide also says use either High Level inputs or RCA inputs. NEVER USE BOTH! |
Question: | Would this system drain to much power from my 2020 civic sedan |
Answer: | No its only a 40w fuse pulls about 250w I have it in my chevy s10 pickup and I have a 90w alternator and RUNS fantastic |
Question: | Can they be laid on the back to go under a bench seat |
Answer: | I guess you could lay it on it’s back but note that the amp heat sink is on the back and would be covered up if laid down. The amp does get warm to the touch with good airflow around it. |
Product features
Rockville RG212CA Dual 12" Slim Vented Powered Car Subwoofer Enclosure 2000 Watt
Product description
This MTX RT8PT is a 8" single amplified tube that is rated 240 watt MAX. The RT8PT can fit into any space and features butyl rubber surrond, built in amplifier, vented enclosure design, comes with mounting straps and wired bass control. This subwoofer will hit bass notes from 35Hz 250Hz. The vented design increases bass output on the enclosure. Thunder Bass, Hard hitting, hard working MTX subwoofer Convenient Size, Small size, but giant bass! Easy installation, Mounts quickly in most trunks and SUVs
- Amplifier Power Output: 120 Watts RMS
- 8" High performance subwoofer in a carpeted, vented enclosure
- High Level and RCA inputs for easy connection in any system set up.
- External Bass Control is included for convenient control of volume from front of vehicle.
- The RT8PT is the perfect solution for enthusiasts that want to put some bass in their system without having to put two 12 inches in the truck
User questions & answers
Question: | Could I pus these on a monoblock amp? Or would I have to bridge them myself |
Answer: | Yes they can be put on mono block, that's what I have set up. Just don't bridge it, it's only 2ohm stable not 1. |
Question: | Does anyone have the BOSS 1100 watt riot amp with these? If so how do you like? Does it hit hard |
Answer: | I've used it temporarily on the sealed enclosure version of these. BOSS amps are cheap for a reason though. Poor sound quality and it doesn't push anywhere near the 1000 watts these can handle. If you want a cheap amp that actually sounds good I'd recommend the Power Acoustik rzr1-2500d it's not 1000 watts RMS but it'll do 700+ on good electrical & sounds Way better than the boss amp |
Question: | anybody had these subs for awhile do they last |
Answer: | I have had these subs in the box 4 going on 6 years with a 3000 watt competition massive amp pushing 800 watts RMS bridged making it 200% overpowered I paid $122 for them six years ago and they are still thumping to this day |
Question: | Is this just the enclosure or is it the two 12" subwoofers and the enclosure in one deal |
Answer: | Everything you see, you get...no speaker wires though... |
Product description
The Rockville RV12.2B Dual 12" 1200 Watt Vented subwoofer enclosure is one of the best bass all-in-one subwoofer packages we ever carried. This package is better than others on the market. This system includes a top of the line ported enclosure which gives you more punchy and better sounding bass. The vents were strategically placed on the bottom of the enclosure and then the enclosure is placed at a 15 degree angle to fire the bass out hard and give you amazing sound quality. This package also includes a mono block bass amplifier vs. Most packages that have a 2 Channel stereo amplifier. This mono amplifier is built just for loud bass. The amplifier is CEA-2006 compliant so you can be 100% sure you will get the power you expect. This is one of the only packages on the market that is CEA-2006 compliant. Most brands are unable to do this because they inflate their power ratings.
- Rockville RV12.2B 1200W dual 12" Car Subwoofer Enclosure amplifier+amp kit
- Rockville RV12.2B Dual 12” bass enclosure system with matching mono block amplifier. 1200 watts peak power/ 400 watts RMS cea-2031 rating. Dual 12” bass enclosure system with matching mono block amplifier. Quasi transmission Line cabinet design.
- Angled at 15% for near perfect in vehicle bass alignment. Exterior: high quality aviation grade tweed Carpet. Oversize Rockville Shield embroidery. Mono, Gold-plated push style, speaker terminal. Dual, high-power, high-efficiency 12" Subwoofers.
- 1200 watts peak power. Power output: 200 watts RMS cea-2006 power @ 4-Ohm and 97DBA (Reference: 1Watt into 4 ohms). Frequency Response: 15Hz - 20Khz (-3Db). RMS power: 400 watts @ 2 ohms. 4 ohm mono-block class A/B.
- 17" High grade twisted pair 100% Copper RCA cables. 17' 8 gauge translucent Blue Super flex Power cable. 3' 8 gauge clear super flex ground wire. 17' 18 gauge Blue remote cable. 17' 16 gauge speaker wire. Gold Plated anl heat resistant fuse holder
User questions & answers
Question: | Are they wired series or parallel |
Answer: | Series |
Question: | can i use the amp with 2 Dual 12 inch speakers |
Answer: | Yes you can. Just ensure that the amp is mounted where it can get some flow of air |
Question: | Will it work with a 2002 Toyota Highlander with stock stereo |
Answer: | Of course any system can work with a stock stereo just make just you know how to install or get a professional |
Question: | I plugged and wired everything up correctly and it doesn’t work!!! Can someone please help me |
Answer: | did you test it before you put everything back in? after you wire everything you should just hook the speakers up and test them to make sure you're good... if you aren't getting any power i would check your wiring and make sure the ground is good.. and everything is up to par.. if your stereo doesn't have power either then you should make sure it's connected properly to the harness.. Make sure your wires are color matched properly.. make sure you have the right wiring harness for your car... ask the question again with more details if you haven't already fixed it.... installed these and they work beautifully |
Product features
Rockville RV12.2B 1200w Dual 12" Car Subwoofer Enclosure+Mono Amplifier+Amp Kit
The Rockville RV12.2B Dual 12" 1200 watt vented subwoofer enclosure is one of the best bass all-in-one subwoofer packages we ever carried. This package is better than others on the market. This system includes a top of the line ported enclosure which gives you more punchy and better sounding bass. The vents were strategically placed on the bottom of the enclosure and then the enclosure is placed at a 15 degree angle to fire the bass out hard and give you amazing sound quality. This package also includes a mono block bass amplifier vs. most packages that have a 2 channel stereo amplifier. This mono amplifier is built just for loud bass. The amplifier is CEA-2006 compliant so you can be 100% sure you will get the power you expect. This is one of the only packages on the market that is CEA-2006 compliant. Most brands are unable to do this because they inflate their power ratings. CEA-2006 compliant means that these are tested and rated by the same industry standards used by other famous brands like Kenwood, Sony, Kicker, etc. The subwoofers in this package are of superior quality. They feature high power 1.5" aluminum 4-layer voice coils with bumped and vented magnet motor structures among other features.The distinct advantage of the Rockville Bass Packages are that our systems from the woofers to the enclosures and amplifiers were all designed and engineered from scratch to work specifically together as a system. We tested these for months to ensure these met our rigorous quality standards. The final result is a super efficient bass response with loud, deep and clean sound.
Product description
Keep the bass bumping in your ride with the Kicker 10-Inch Dual Subwoofer Enclosure. This quality enclosure is built with heavy MDF construction and thick black carpet for durability. The dual 10-inch subwoofer enclosure works best with 600 watts of power, and recommended for use with rap or music with rumble bass. It features 2-ohm impedance and 98.4 dB of sensitivity. Get more out of your music and ride in style with the Kicker subwoofer enclosure.
- 10-INCH SUBWOOFER ENCLOSURE: Kicker Dual 10-Inch 1200 watt vented subwoofer enclosure is factory-tuned and vented for deep, thunderous bass
- 1200-WATT POWER: 1200 Watts Max, 600 Watts RMS power
- SENSITIVITY: 2 ohm impedance and 98.4 dB sensitivity
- FEATURES: Features spring loaded speaker terminal, custom port design, heavy MDF construction and thick black carpet to protect the enclosure
- SPECIFICATIONS: Compact to use in very little trunk space or in a SUV; Dimensions: 28 x 14 x 13.44 / 16.38 inches (W x H x Top Depth / Bottom Depth)
User questions & answers
Question: | Hey is 3000 watt amp good for this? if i remember correctly it's a gravity 3000 amp, never heard of em tho |
Answer: | I would give these more than 250 rms a piece. If ur looking to connect 2 of them at 2ohm u should be good. If your connecting 2,500 ms should be good. And try to avoid wiring these at 1ohm. They will sound really good for about 1 hour or 2 then they will blow. I went thru 2 pairs before finding a good amount of wattage. If ur budget is 50 dollars per speaker. Try the skarix or the jbl gt series. |
Question: | When running @ peak performance, can this be installed using factory battery & alternator without issues |
Answer: | short answer yes, long answer no. first, they are not marine subs, so there will be corrosion. second, they are not as stiff suspension as free-air/ ib subs, so for mechanical reasons, power handling is greatly reduced, especially in the lower frequencies, and should include the use of a ssf and eq slope. and last, any noise in the engine bay will be transferred through the cone. better off building a wakeboard rack style encolsure and a smaller sub, for more output. |
Question: | I have a 800w amp is it too powerful or what |
Answer: | No. RCA, and line inputs are in the supplied harness. |
Question: | Is it good for a truck |
Answer: | bass only |
Latest Reviews
View all
Compression Knee Sleeves
- Updated: 26.02.2023
- Read reviews

Hello Kitty Karaokes
- Updated: 22.02.2023
- Read reviews

Hue Slipper Socks
- Updated: 07.05.2023
- Read reviews

Pigeon Baby Straw Cups
- Updated: 07.04.2023
- Read reviews

Ninja Can Crushers
- Updated: 03.06.2023
- Read reviews