2 best boss audio car woofers

Product description

Shift your audio experience up a gear with the Boss Audio Riot R1100M Class A/B Monoblock Amplifier. This powerful 2-Ohm stable amplifier features 1100 Watts Max Power with a MOSFET power supply to rock your tunes. Customize the sound with Variable Low Pass Crossover and Bass Boost. Tweak the Bass and feel the vibes with the Remote Subwoofer Control. Amplifiers in the Riot Series are perfect for first time car audio buyers looking to add Bass, enhanced sound and performance to their system at an affordable price. Drive up the beat with the Boss Audio R1100M.

For further product details, please scroll down.

• Installation - Connect Power/ground to the closest point of chassis of the vehicle. Keep ground wire less than 39” (100 cm) in length. Use 8 gauge or heavier wire. A Mobile Electronics Certified Professional is recommended for installation & safety
• Power - Maximum Power Output of 1100 Watts at 2 Ohms into one channel. Max power output of 550 Watts at 4 Ohms into one Channel. This amplifier is designed to run your subwoofer(s) giving them the power that they need to perform as they were meant to
• High Level Inputs - Speaker level inputs are commonly referred to as high-level inputs. Speaker level inputs will be used to connect the R1100M to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
• Low Level Inputs - Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the R1100M with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
• Low Pass Crossover - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
• Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it
• Specs - Dimensions: 9.1” x 0.4” x 2.3”, It can be installed in a variety of different places due to its’ slim and compact design, Weight: 4.43 Lbs. Amplifier Car Audio. Monoblock amplifier
• Warranty - BOSS Audio Systems provides a powerful 3-year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.com. We strongly encourage professional installation of this product to ensure proper and safe functionality

Product features

Boost your Bass

Ramp up the bass with the Boss Audio Riot R1100M Class A/B Monoblock Amplifier. With 1100 Watts Max Power and MOSFET power supply, this amplifier takes your vehicle's audio system to the next level. Customize the sound with Variable Low Pass Crossover, Bass Boost and Remote Subwoofer Control. Amplifiers in the Riot Series are perfect for first time car audio buyers looking to add bass, enhanced sound and performance to their system at an affordable price.

MOSFET and Class A/B

Metal Oxide Semiconductor Field-Effect Transistors quickly switch from full to non-conduction for high-efficiency output.

Our Class-A/B amplifiers feature specific linear circuitry that increases sound quality and power output while reducing distortion and improving efficiency.

2 Ohm Stable and High and Low Level Inputs

2-Ohm stable comfortably powers speakers or subwoofers when in use at 2-Ohms, resulting in more power and volume.

High-level inputs accept speaker output signals and low-level inputs accept pre-amp output signals to allow for the addition of amps and processors to standard factory or aftermarket source units.

Variable Low Pass Filter

Variable low-pass filter gives you control over the frequencies that pass through to the subwoofer.

Switchable Bass Boost

Switchable Bass Boost allows you to boost the low bass +18db.

Subwoofer Level Control

A wired remote lets you easily control the subwoofer level for customized output and superior sound.

Short Protection

Automatic shut-off protects the amplifier if it gets too hot or if speakers fail causing a short.

Variable Input Control

The Variable Input Control allows the amplifier input to match the output signal from the head unit to achieve optimum performance when adjusted properly.

Illuminated BOSS Logo

The BOSS logo is backlit in a cool blue on this Riot Series Amplifier.

Product description

BOSS Audio Systems CXX10 Car Subwoofer - 800 Watts Maximum Power, 10 Inch Subwoofer, Single 4 Ohm Voice Coil, Sold Individually

• Sensitivity SPL (1W / 1m) 87 dB, Resonant Frequency 36 Hz
• Polypropylene Cone, High Temperature Voice Coil, Rubber Surround
• Sealed Enclosure Internal Volume: .65 Cubic Feet, Ported Enclosure Internal Volume: 1 Cubic Feet
• 3.5 Inch Round Inch Port Circumference, 10 Inch Port Length, 38 Hz Port Frequency
• 4.6 Inch Mounting Height, 9.2 Inch Mounting Hole Diameter
• Dimensions: Depth 11” x Width 11” x Height 4”
• 3 Year Platinum Online Dealer Warranty

User questions & answers

Question:	Can you run this with out a box and how tall is the sub
Answer:	It fit perfecty in the spot of the old sub. I don't use a box. My stereo is extremely adjustable . If my stereo was basic it might not work. I love it and it goes well wih my 4 inch speakers. Its like I have a comcert in my car . Unbeatable price for what the sound it puts out
Question:	This is only one sub right? Or two
Answer:	The CX122 is sold as a single subwoofer.
Question:	will this fit in my 06 honda civic, sone models come with subwoofers made in the rear window and mine happen to be one but my woofer is busted
Answer:	Hello, The CX8 should be a great fit being it matches the 8-inch dimension of your current speaker. Thank You!
Question:	Can this sub replace the OEM sub to a 2002 yukon
Answer:	A friend got mine into my 2000 Chevy Tahoe for me. So I assume it will work in your 2002 Yukon. Speakers are great and give good base and sound. Great quality for the price!

Product features

Break Your Subwoofer In

A new subwoofer must go through a short but important process of “break-in” before it is run under harsh conditions. The “break-in” process will ensure the subwoofer is able to perform as it has been designed to. This process involves subjecting the subwoofer to no more than low-to-medium volume levels for a number of hours in the enclosure. 3-4 hours is generally sufficient for the subwoofer’s suspension to loosen enough to prevent the voice coil(s) from overheating and causing failure. The break-in period is also effective in extending subwoofer life. Over-driving the woofer before it has been properly broken-in will usually result in premature failure and poor performance.

Cone: Polypropylene

Commonly called just PP, this plastic has various forms. It is a resilient and durable manufactured material that can be used in thousands of applications across virtually all fields. It can be used for tubes, car trims, and bags. In the specific case of our cones, this material allows for maximum give that produces great sounding speakers lasting you a long time.

Surround: Butyl Rubber

Butyl Rubber is a synthetic (man made) rubber and is valued for its chemical inertness, impermeability to air and the ability to endure or resist exposure to the many types of weather fronts. Butyl rubber has many different applications. Anywhere from Sports equipment to automotive parts, the medical industry and more. We use them for the Surrounds that connect the cone to the basket

Voice Coil: High Temperature

Our voice coils are remarkable for their low density and ability to resist corrosion. They have the ability to perform under stress in both high tension and high compression environments.