9 best absolute car woofers

Product description

Absolute Strike Series ST-1500 1000-Watt 10" Dual 4-Ohm Strike Series Car Subwoofer

• 1000-Watt 10" Dual 4-Ohm Strike Series Car Subwoofer
• 1000 Watts
• Dual 4 Ohms

Product description

Slim 2ohm subwoofer; 450W max; 200W RMS @ 2ohm @ 100Hz ; 0dB-12dB bass boost; 35Hz subsonic filter ; 75Hz-150Hz low-pass filter; 0deg /180deg phase switch; PWM MOSFET power supply; Thermal protection circuit ; Adjustable input sensitivity; RCA

• Power: 550 Watts Max/ 200 RMS
• RCA Input/High level input
• Vega bass boost: 0-+12dB
• Remote control for subwoofer level
• PWM MOSFET Power Supply/Thermal Protection Circuit

User questions & answers

Question:	What all does the Subway for come with 4 wiring
Answer:	I had it professionally installed but i think a harness was in there
Question:	Will this subwoofer fit in the trunk of a 2012 Kawasaki Voyager and is the battery on the bike sufficient to power the sub
Answer:	Did Install it on Ford ranger 2020 super crew back to the sit and it fit very good
Question:	Do you have to run a remote power wire or does it have audio sensor to turn amp on
Answer:	Hi, This item comes with a remote wire and capable of receiving either high or low input. Once you turn on your engine and head unit,this will also turning on. Thank you for asking and hope this could help.

Product description

Skar Audio designed the SDR-1X12D2 loaded subwoofer enclosure package for those who seek ultimate performance in subwoofer-bass fidelity. This package offers a simplified option to add a competition-grade subwoofer system, without the guesswork involved in designing it from scratch. The custom enclosure features one, SDR-12 D2 subwoofer, which is pre-loaded and wired up inside of a custom single 12" vented enclosure. We also include the perfect amplifier in this package to power your new subwoofer with the Skar Audio RP-800.1D, which comes with a premium 4 gauge amplifier wiring kit to make installing the amplifier hassle free. This custom enclosure used in this package was engineered by Skar Audio specifically for the subwoofer that is loaded in it, ensuring perfect sound and compatibility. Every subwoofer is different, and it is so critical when buying a subwoofer to ensure that the subwoofer and enclosure are an ideal match, or you will lose sound quality and output. The enclosure features a unique kerf port design, allowing for extreme levels of bass output. Furthermore, the enclosure is finished in premium grade black carpet for a sleek appearance and features the Skar Audio logo in white on the top surface of the box. The subwoofer comes pre-wired and loaded inside of the enclosure allowing for an easy and hassle free installation. The dual 2-ohm woofer is wired up inside of the enclosure so that the final impedance load is configured for 1-ohm at the terminals.

• All-in-One Complete SDR Series Loaded Subwoofer Complete Bass Package
• Peak Power: 1,200 Watts, RMS Power: 600 Watts
• Includes x1 Skar Audio SDR-1X12D2 Single 12" Loaded 1,200 Watt Vented Subwoofer Enclosure
• Includes x1 Skar Audio RP-800.1D Class D 800 Watt Monoblock Amplifier
• Includes x1 Skar Audio SKAR4ANL-CCA 4 Gauge Complete Amplifier Wiring Kit

User questions & answers

Question:	Would this fit somewhere in my 2004 Chevy Silverado 2500hd duramax without taking up more than one seat
Answer:	Yes
Question:	How many channels does the amp have
Answer:	I’d say anywhere for 18 to 20 gauge it’s very thin but haven’t had a problem with this kit
Question:	Does this include a remote subwoofer volume control
Answer:	No, you have to have a large gauge crimper.
Question:	Does this fit in my 2015 Honda Accord
Answer:	I know this post is from 2 months ago. But you need to figure everything in RMS wattage. Not Peak. I have a SKAR 1200.1. 1200 watts RMS but it hits abt 2500 peak on the amp Dyno@1ohm. This kit is adequate for my setup. This kit is OFC. 2500 watts RMS no but if your amp is 2500 peak. Yes this is enough. Also depends if your amp is class B or a Class D amp. Class D Amps are abt 75% efficient Total RMS wattage divided by 0.75 then divided by 13.8 gives your total current draw of your amp. If you have a class A/B change that number to 0.50 and do the same calculation. A good rule of thumb. Take the fuse ratings on your amp and add them up. Multiply by 10 and that’s usually your real RMS not what is advertised on the amp. If it has no onboard fuse the owners manual will tell you the recommended fuse size and multiply that by 10. I’d say this 17 foot kit would be fine 1200-1500 Watts RMS. If it’s closer to 1500 watts just buy a 150 AMP fuse for this kit on amazon for 4-5$ and you should be good. Always rake distance into account too. 16-18ft of 4 gauge OFC is fine. But if you go over 18ft you need 2 gauge or 0 gauge.

Product description

The PPA10 expels the extra bump at up to 600 watts. Mid-sized and rigged with a steel basket, it's durable and light. With a cloth-edge suspension, don't be afraid to pump it all the way up.

• 600 WATT POWER: This high powered audio projection woofer system has a maximum power output of 600-watt peak power / 200 watt RMS so you can play your favorite tracks as loud as you want and with style
• 50Hz - 5kHz FREQUENCY RESPONSE: This high-performance car woofer speaker has a frequency response of 50Hz - 5kHz that will complete your current car woofer enclosure system for full-range stereo sound reproduction
• 1.5” KAPTON VOICE COIL: This car speaker has 1.5” high-temperature Kapton voice coil, 89.2 dB SPL and 8ohm impedance rating that compensates the undersized wire found in most cars. Ultimately reduces distortion so you can enjoy a crisp & clear sound
• 10 INCH PAPER CONE: Pyle Pro follows the standard size for most car stereo systems & created this 10" woofer strong black paper cone driver perfect for new speaker construction or replacing worn or blown speakers in your favorite loudspeaker cabinet
• 50 OZ MAGNET STRUCTURE: This woofer speaker has a 50 oz magnet structure. The heavy-duty housing along w/ the stamped steel basket & cloth edge suspension provides a strong foundation. It is also super easy to install to your vehicle's sound system
• 10"/600 watts
• Stamped Steel baskets

User questions & answers

Question:	can this work in a car
Answer:	Looks like lead based paint. Im scared
Question:	would this make a good replacement subwoofer for home audio use
Answer:	Wouldn’t know since I got them all broken up had to return them
Question:	are these for low bass or mainly for midbass or fullrange
Answer:	They are made in China.
Question:	Is this a 4 or 8 ohm speaker
Answer:	I don't know, because everyone has different fingers, my husband has big fingers and they fit nicely. I have small fingers and love them also.
Question:	Calculated volume on this box to be only .458 ft3 with a material thickness of 5/8 as indicated on the makers website. Can anyone confirm
Answer:	it is set of 6, DOWAN gradient tea mug is just one
Question:	Hi Folks, three questions about this enclosure. Is the exterior painted particle board material? Also does any one know the hole diameter
Answer:	No, they do not get hot in the microwave. I’ve used these in the microwave many times to reheat my coffee and the handles for not get hot. On average, I probably put the cup in on high for about 45 seconds as a reference.
Question:	will this box fit a "normal" sub, or does it need a shallow sub
Answer:	I would consider it an ivory. It's not stark white (when I compare it to a white mug I have) but it's not too far off.
Question:	What is the size of the box in height and width, thanks
Answer:	With the "right" content, yes. The key is "right content". Have another big orange drink!

Product description

The Skar Audio DDX-10 D4 is a competition grade, 10-inch, dual 4-ohm, car subwoofer. The DDX line-up was engineered by Skar Audio to be an SPL grade woofer that could also be utilized in daily system applications, allowing non-competitors to use the same subwoofers as those competing in the lanes. Every component used in the design of these woofers is of the highest quality for reliability and increased performance. Conservatively rated at a 1,500 watts peak power and 1,000 watts RMS power, this subwoofer was engineered to be extremely loud. Featuring a massive double stack motor (202 oz), 2.5" pure copper high temperature voice coil, and a competition grade pressed paper cone stitched to the high roll foam surround, the woofer comes equipped ready to handle serious amounts power. Dual 4-ohm voice coil configuration. Specifications - Peak power: 1,500 Watts, RMS power: 1,000 Watts. Sensitivity (SPL): 83.6 dB, Frequency Response: 40 - 500 Hz, Fs: 48 Hz, Qts: 0.53, Qms: 4.6, Qes: 0.59, Bl: 27.1 n/a, Vas: 8.7 L. Subwoofer Mounting Depth: 6.10", Subwoofer Cut-Out Diameter: 9.25".

• 10-inch Dual 4 Ohm Competition Grade Car Subwoofer
• Peak Power: 1,500 Watts | RMS Power: 1,000 Watts
• Massive Double Stack Magnet & High Temperature 2.5" Copper Voice Coil
• Competition Grade Paper Cone Stitched to High Roll Foam Surround
• Advanced Air Flow Cooling Design | Fs: 36.2 Hz
• Frequency Response Range: 28 Hz - 300 Hz | Sensitivity (SPL): 83.6 dB

User questions & answers

Question:	What is the best amp i can use for a pair of these sub
Answer:	No it is not
Question:	What kind of amplifier would I need for to the speakers
Answer:	I had no issues pushing the stock sub ..
Question:	Can 2 ddx 12s dual 2 ohm handle my 4000w amp? and what ohm should i wire them
Answer:	Subwoofer. I have it pushing 2 JL Audio 12"s.
Question:	I have a 1600watt mono pioneer amp and im looking to get 2 of these. Will they handle 1ohm
Answer:	Yes

Product features

Product Specification

• Dual 4 Ohm Voice Coil Configuration
• Peak Power: 1,500 Watts
• RMS Power: 1,000 Watts
• Competition Grade Pressed Paper Cone
• Stitched High Roll Foam Surround
• Advanced Air Flow Cooling System
• 2.5" High Temperature Copper Voice Coil
• Motor Weight: 202 oz
• Frequency Response: 28 - 300 Hz
• Sensitivity: 83.6 dB

Product description

Give your vehicle's audio system an upgrade with the SSL LOPRO10 Class a/b 10"" Low profile amplified subwoofer. This powerful amplified subwoofer Features 1200 watts Max power with a MOSFET power supply to take your music to the next level. With high and low level inputs It can be hooked up to just about any In-Dash stereo. At a height of just 3"", it's perfect for fitting into tight spaces, including under the seat of many vehicles. Customize the sound with the variable low Pass Crossover, bass boost, subsonic filter, phase control and remote subwoofer control. Gear up and get your music thumping with the sound storm LOPRO10. For further product details, please scroll down.

• Built-in amplifier: with a MOSFET power supply you get improved switching speeds, better performance with less power from the driver, lower gate-to-drain feedback capacitance, lower thermal impedance for higher switching frequencies
• VARIABLE LOW-PASS FILTER: A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
• High level inputs: speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the LOPRO10 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
• Low level inputs: line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the LOPRO10 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
• Variable bass boost: variable bass boost allows you to adjust the low bass within the boost Range to just the way you like it
• Dimensions: 15” x 9. 75” x 3”. If you are short on space, This is a great solution for you. The combination of amplifier and subwoofer all into one, makes this ideal for spatially challenged vehicles
• : sound storm provides a powerful 3-year Platinum online dealer so long as the purchase is made through . We strongly encourage Professional installation of this product to ensure proper and safe functionality

User questions & answers

Question:	Is this subbwoofer water resistant, for use on a boat
Answer:	Not waterproof. You would have to put it in a waterproof enclosure.
Question:	Would this do a good job in a mini van? Not looking to entertain the neighboring car, but would like to enjoy the bass and keep it out of sight
Answer:	I think it would work very well in a mini van. I put this behind the backseat of my 2004 Frontier Crew Cab and because the cabin is relatively small and I can barely turn it on without being overwhelmed. I think it would work perfectly well in a much larger vehicle. Honestly, I'm blown away by how well this simple sub performs and how small/thin it is. Never would have believed it if I hadn't bought it.
Question:	What hardware or tools I need for the installation of the Sound Storm Laboratories LOPRO10 LoPro Series Low Profile Amplified 10-Inch Subwoofer
Answer:	You will need an inexpensive amp wiring kit, I used the 4 guage kit available here and wire strippers or a razor knife would work and a cable end crimper or even some pliers would work just fine for crimping wire ends on. the amp itself comes with everything to mount it two different ways, the easiest way especially if you are mounting it to carpet is the adhesive backed Velcro tape, that's how I mounted mine, I have two of them installed in the rear hatch floor of a fiat 500, the Velcro is very effective or you can use the metal screws that are also included.
Question:	Can someone say what are the actual measured dimensions of the product and fuse amperage please
Answer:	Actual dimensions of the unit are 15x12x3. The box it comes in is 18x14x5.

Product features

Deep Bass Low Profile

Enjoy the rich sound of Bass in just about any vehicle with the SSL LoPro10 Class A/B 10 inch Low Profile Amplified Subwoofer. With 1200 Watts Max Power and MOSFET power supply and High and Low Level Inputs, this Amplified Subwoofer can be hooked up to just about any in-dash stereo. With a height of just 3 inch, it's a perfect solution when space is an issue as it can easily fit under the seat of most vehicles. Customize the sound with the Variable Low Pass Crossover, Subsonic Filter, Phase Control and Remote Subwoofer Control.

Break Your Subwoofer In

This process involves subjecting the subwoofer to no more than low-to-medium volume levels for a number of hours in the enclosure. 3-4 hours is generally sufficient for the subwoofer’s suspension to loosen enough to prevent the voice coil(s) from overheating and causing failure. The break-in period is also effective in extending subwoofer life.

Built-In Amp and High and Low Level Inputs

Systems with a built-in amplifier do not require the addition of an external amp. They already have the power to play louder.

High-level inputs accept speaker output signals and low-level inputs accept pre-amp output signals to allow for the addition of amps and processors to standard factory or aftermarket source units.

MOSFET and Class A/B

Metal Oxide Semiconductor Field-Effect Transistors quickly switch from full to non-conduction for high efficiency output.

Our Class-A/B amplifiers feature specific linear circuitry that increases sound quality and power output while reducing distortion and improving efficiency.

Variable Low Pass Filter and Subsonic Filter

Variable low-pass filter gives you control over the frequencies that pass through to the subwoofer.

Subsonic filter restricts low-frequencies below the specified setting for better subwoofer protection and performance.

Subwoofer Level Control and Bass Boost

A wired remote lets you easily control the subwoofer level for customized output and superior sound.

Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.

Short Protection

Automatic shut-off protects the amplifier if it gets too hot or if speakers fail causing a short.

Phase Control

Phase control lets you switch the speaker phase with the amp if your speakers or subwoofer are hooked up 'out of phase'.

Low Profile

Low-profile subwoofers are a great choice for space-constrained areas without compromising on power and performance.

Variable Input Control

The Variable Input Control allows the amplifier input to match the output signal from the head unit to achieve optimum performance when adjusted properly.

Product description

Absolute VEGS12 Box Series 12" Single Slot Vented Subwoofer Enclosure

• Absolute VEGS12 Box Series 12" Single Slot Vented Subwoofer Enclosure
• 12-inch Single Vented Enclosure
• MDF Construction
• Completely Carpeted Enclosure
• 1-inch Speaker Baffles Screwed Down Terminal Cups

Product description

Infinity Kappa 1200W 12" 1200 Watt Car Audio Subwoofer

• Power rating:
• Peak: 2000 watts
• Rms: 500 watts

User questions & answers

Question:	Mounting depth
Answer:	Yes, but it wouldn't zip into the lid section like its designed for on the carry-on model. You could basically use it as a separate packing organizer in the main compartment of the 25".
Question:	Is this series a Dual Voice Coil
Answer:	It''s pretty large. It'll fit most 15.6" laptops.
Question:	Does anyone else have issues with the sub not working in the cold
Answer:	To set the 3-Dial TSA Combination Lock, 1.) Dial should be on 0,0,0. 2.) Slide release button towards dial to confirm lock will release 3.) Use a pointy object and insert into reset button, do not hold it in 4.) Set the dial to desired number ie. 1,2,3 5.) Push release button towards the dials to confirm code is set. If set correctly the reset button should click and release 6.) Test combination code by turning the dials to numbers other than preferred number, then push release buttons. (dials should not release) 7.) Use your preferred number then push release button to verify code is set. Button should release. 8.) Insert zipper tabs into slots while preferred number is displayed, tabs should release.
Question:	What is the recomended box volume? Id rather know before i buy
Answer:	In china, like everything else in this world...for now.

Product features

Infinity Kappa 1200W 12" 1200 Watt Car Audio Subwoofer, Black

Looking for a more moving audio experience? Take Infinity car audio for a ride. You can expect extreme output from Kappa subs, so be prepared for accuracy and detail that will simply blow you away. The Kappa Series subwoofers feature SSI (Selectable Smart Impedance), a HARMAN-exclusive impedance selector that lets you choose a 2- or 4-ohm impedance at the flip of a switch. Our proprietary aero-cooling design keeps the voice coil cool while optimizing power handling and long-term reliability. Finally, the acoustically damped glass-fiber cones have been engineered to minimize distortion and unwanted artifacts. More performance and flexibility: you get both when you step up to an Infinity Kappa subwoofer.

Know What's In The Box

• 1 x subwoofer
• 1 x foam mounting gasket
• 1 x [3mm] hex wrench
• Owner’s manual

Features

SSI (Selectable Smart Impedance)

Car audio system designs call for 2- or 4-ohm impedance. Kappa Series subwoofers put the choice in your hands. A proprietary HARMAN technology, SSI lets you reconfigure your system by simply flipping a switch.

Aero-cooled voice coil

The Kappa Series voice coil employs a two-sided, ducted airflow design that cools the voice coil, increases power handling and improves reliability. This aero-cooling design is unique.

Acoustically damped glass-fiber cone

Kappa subwoofer cones incorporate glass-fibers for exceptional accuracy and detail. Inherently non-resonant, the glass-fiber cones eliminate distortion so your music—and nothing but your music—comes through loud and clear.

Premium screw-down terminals

Power is the lifeblood of any subwoofer. The terminals on the Kappa subwoofers accommodate up to 8-guage wire (8.37mm 2 cross section), which transfers low-resistance, low-loss power to the woofer, even over long wire runs.

Product description

This 15" Super Deluxe subwoofer from Q Power is the highest quality subwoofer ever produced by Q Power. This dual 4 ohm car subwoofer can handle 4000 watts of peak power and boasts a massive 3" voice coil. The magnet on this subwoofer is absolutely huge, and it is built with the highest quality of engineering. The cone diameter is 320mm, and the subwoofer has Xmax of 14mm. It will hit frequencies between 25Hz-200Hz and has SPL numbers of 89dB. Purchase two and you can wire them down to 1 ohm for optimal amplifier performance. Q Power is known for creating high quality car electronics at incredibly affordable prices.

• Q Power QP15 15 Inch Super Deluxe Subwoofer
• 4000 Watts Max
• Dual 4 Ohm Voice Coils (DVC)
• 3 inch voice coil
• Cone diameter: 320mm

User questions & answers

Question:	of these or 2 power acoustik bamf subs on 6000 watts max amp
Answer:	I've had 4 of these bad boys in my truck before and they were great! I'd definitely go with these if you're talking about longer lasting and if you're wanting some loud bass.
Question:	do you know what's the rms
Answer:	2000 watts rms
Question:	Whats the rms on these subs
Answer:	Yez they can handle the 1000rms I'm not sure bout the max but I have run the skar rp2000 & sundown 2000 but would need a way bigger amp to test the max of these subs but I'd say if you can supply a true 500/750rms you be very happy but stay away from pretty fab boxes I say get one from Qpower or building a custom my box is bout 8 cube and tune to 28hz and people are amazed when they here or see the shaking
Question:	What is the minimum cubic feet you can get away with with this sub and still have good sound quality
Answer:	2.4 sealed 3.0 ported. I bought 6 of them