4 best pyle audio crossovers
Pyle Audio crossovers are electronic components used in car audio systems and other audio setups to divide and route audio frequencies to different speakers. Crossovers are an essential part of high-quality sound reproduction, ensuring that each speaker receives the appropriate range of frequencies to produce clear and balanced audio. Here's what you need to know about Pyle Audio crossovers:
Frequency Division: Crossovers are designed to split the incoming audio signal into different frequency ranges, typically high, mid, and low frequencies. This division is crucial for directing specific frequencies to the appropriate speakers in a multi-speaker audio system.
Speaker Protection: Crossovers play a significant role in protecting speakers from damage by preventing them from receiving frequencies they cannot handle.For example, subwoofers are designed for low frequencies, while tweeters are meant for high frequencies. Sending the wrong frequencies to a speaker can cause distortion or even permanent damage.
Types of Crossovers: Pyle Audio offers various types of crossovers, including passive and active crossovers.
Passive Crossovers: Passive crossovers are the most common type and are often used in car audio systems. They are installed between the amplifier and the speakers and require no external power source. Passive crossovers use passive components like capacitors and inductors to filter frequencies.
Active Crossovers: Active crossovers require an external power source and are typically used in more advanced car audio systems or home audio setups. They provide greater control over frequency division and are often favored by audio enthusiasts for their flexibility and precision.
Crossover Points: Crossovers have adjustable crossover points, which determine the frequency range each speaker handles. Users can often fine-tune these settings to achieve the desired sound quality and balance.
Compatibility: When choosing a Pyle Audio crossover, it's essential to ensure compatibility with your speakers and amplifier. Crossovers should match the impedance and power handling capabilities of your audio components for optimal performance.
Installation: Installing a Pyle Audio crossover involves connecting it correctly in the audio signal path. Passive crossovers are usually installed between the amplifier and the speakers, while active crossovers require a more complex installation with power connections.
Sound Quality: Properly tuned crossovers can significantly enhance sound quality by directing frequencies to the appropriate speakers, reducing distortion, and improving clarity and balance.
Additional Features: Some Pyle Audio crossovers may come with additional features such as equalization controls, phase adjustments, and subwoofer level controls, allowing users to further customize their audio setup.
Car Audio and Home Audio: While Pyle Audio crossovers are often associated with car audio systems, they can also be used in home audio setups, particularly in multi-channel speaker systems or home theaters.
Pyle Audio crossovers can be a valuable addition to your audio system, helping you achieve a more immersive and high-quality audio experience by ensuring that each speaker is handling the right frequencies. Proper installation and tuning are essential to maximize the benefits of these crossovers in your audio setup.
Below you can find our editor's choice of the best pyle audio crossovers on the market
4 Channel Car Stereo Amplifier - 4000W High Power 4-Channel Bridgeable Audio Sound Auto Small Speaker Amp Box w/ MOSFET, Crossover, Bass Boost Control, Silver Plated RCA Input Output - Pyle PLA4478
Product description
Maximum Power Output 4 x 1000W - Bridgeable RMS Power @ 4 Ohms: 2 x 2000W - 4 Channel Bridgeable MOSFET Amplifier - Frequency Response 20 Hz-50kHz (±3dB) - Output Power @ 14.4v DC, 50Hz - 2 Ohm Stable - MOSFET Power Supply - PWM ( Pulse-Width-Modulation ) System - Glass Epoxy PCB - Silver RCA Inputs - Custom Terminal Block for Speaker Connection - Thermal / Overload / Short Circuit Protection - Input Impedance: 47K Ohms - Soft Turn On/ Off - Advanced Protection Circuitry - S/N Ratio: >90dB - Dimensions:10.24"W x 2.21"H x 17.72"L
From the Manufacturer
- 4000 WATT POWER: The Pyle 4 Channel Car Amplifier is perfect for your vehicle's sound system. Gives you up to 4000W bridgeable output. Features switchable bass boost, variable gain control, configurable electronic crossover network
- SILVER-PLATED RCA PORTS: The RCA ports are silver-plated for eliminating signal loss. The subsonic filter allows low-end interference to be cut so your speakers will always deliver the highest quality audio
- MOSFET PULSE: The MOSFET pulse width modulation power supply allows for a clean distortion-free signal to your compact speakers providing you with crisp and clear audio for an outstanding music experience. Also features pulse width modulation system
- THERMAL PROTECTION: To keep both your car and the stereo amp safe, this model is equipped w/ thermal, overload and short circuit protection. Has been specially designed from the bottom up to provide safe and high quality sound in a sturdy form factor
- SLIM SIZE DESIGN: This box amp's small size makes installation a breeze, you'll have no trouble finding a spot for this little yet powerful device. Additional features include LED indicators, RCA output, soft turn-on circuit, glass epoxy PCB and more
User questions & answers
| Question: | i havee 2 subwoofer 1000watt each one 2coil can i bridge 2 channels to get 1000 watts 1 nd bridge the one too |
| Answer: | I’m sorry, I can’t tell you. My jar arrived in a flimsy envelope, broken and leaking. |
| Question: | Can this amp power the 2 power acoustik mofos-12d4 12" dual 4 ω 1200w rms subwoofer |
| Answer: | I know that the ones that have Bacon listed in the name of the product (Hot Pepper Berry Bacon Jam for example) do list bacon in the ingredients. So, if Bacon is not in the name or in the list of ingredients it seems like you would be safe to assume no bacon. |
| Question: | Can I run this amp on 2 2000w pioneer champion series pro subs |
| Answer: | It has a 'Best By' date not a expiration. Of course that date will change when we order more, but for now that is the, "Apple Maple Bacon Jam," has a 'Best By' date of 05/23/21. Thank for showing an interest in our products, please do let us know if we can answer any more questions. Thank you |
| Question: | What guage of wire should I use with this amp |
| Answer: | Not open but could have popped in transit? |
2-Way Car Stereo Speaker System - 360W 6.5 Inch Universal Pro Audio Car Speaker OEM Quick Replacement Component Speaker Vehicle Door/Side Panel Mount Compatible w/Crossover Network - Pyle PL6150BK
Pyle
Product description
-
- 360 WATT POWER: Pyle offers a pair of car speakers with a power of 180 Watt RMS to 360 Watt peak with 4 ohm impedance that will produce high-quality sound resonance. Play your favorite tracks as loud as you want and with style
- 6.5 INCH SPEAKERS: A clean-cut automotive speaker that boasts the size of 6.5” x 6.5” x 2.52” black high-quality poly injection speaker cone. Enhances car stereo by producing powerful audio sound. Also has 25oz high-density rubber magnet boot
- ¾ INCH PIEZO TWEETERS: These speakers for the car are made entirely of massive butyl rubber surround for durability. The two-way speaker system introduces ¾” piezo tweeters, and 0.5” neodymium PEI dome midrange in each speaker
- ASV VOICE COIL: The voice coil in this coaxial speaker is a dual 1 inch high-temperature ASV to resist corrosion. Designed w/ non-fatiguing rubber suspension to keep equipment safe. These speakers are vehicle door & side panel mount compatible
- 2.32” MOUNTING DEPTH: Easy to install w/ its 2.32” mounting depth & fits most audio system for cars, boats, motorcycles or RVs. Includes 2 midwoofers, 2 tweeters, 2 crossover network, cables, grills & mounting hardware for a quick & hassle-free setup
User questions & answers
| Question: | Do they come with speaker covers cages or whatever you want to call it |
| Answer: | Hi, the unit comes with the following items listed below. (2) Midwoofers (2) Tweeters (2) Crossover Network Grilles Wires Mounting Hardware Thank you. |
Product features
Two-Way Component Speaker Systems
A pair of car speakers with a power of 180 Watt RMS to 360 Watt peak with 4 ohm impedance that will produce high-quality sound resonance. Play your favorite tracks as loud as you want and with style
2 Inch Car Speaker Tweeter - Heavy Duty 700 Watt High Power Super Titanium Audio Tweeter System w/ Die Cast Aluminum Frame, 2kHz-25 kHz Frequency, 112 dB, 4-8 Ohm, Crossover Capacitor - Pyle PDBT78
Pyle
Product description
Pyle has been in business for over 35 years, and their manufacturing experience and expertise is easy to see - and hear. Pyle Drivers are all manufactured with a close attention to detail, and maintain tight manufacturing tolerances, which are both necessary to produce a quality product. Pyle Tweeter Drivers are second to none, and feature solid construction and accurate power handling ratings.
- 700 WATT POWER: This high powered audio projection tweeter system has a maximum power output of 700-watt peak power / 350 watt RMS so you can play your favorite tracks as loud as you want and with style
- 2kHz - 25 kHz FREQUENCY RESPONSE: This car tweeter speaker has a frequency response of 2kHz - 25 kHz that will complete your current car woofer enclosure system for full-range stereo sound reproduction
- 4-8 OHM IMPEDANCE: This car tweeter has 112dB/w/m sensitivity and 4-8 ohm impedance rating that compensates the undersized wire found in most cars. It ultimately reduces distortion so you can enjoy a crisp and clear sound
- 2” KAPTON VOICE COIL: Pyle Pro follows the standard size for most car stereo systems and created this 2 inches super titanium car audio tweeter speaker with 2” high-temperature Kapton voice coil. Additional feature includes mylar crossover capacitor
- 20 OZ MAGNET: This tweeter has a 20 oz magnet structure w/ heavy-duty housing that provides a strong foundation. Also, feature a diamond chrome cutting finish & die-cast aluminum frame. Easy to install to your vehicle’s sound system w/ 3” mounting depth
- Die cast aluminum frame
- Diamond Chrome Cutting Finish
User questions & answers
| Question: | Can this be use for voices in car system |
| Answer: | Can be used anywhere, only - if sound quality is important, not volume - a divider filter should be used, at least 3 layers, preferably 4, no non-polar electrolytes should be used, coils only without ferrite cores and sufficient - about 10cm apart.All connections only soldered . You can already with the included capacitor, but the speaker is very sensitive, so it will be a completely different sound with sibilants, because the curve for filtration will be too flat. If only a capacitor is used, then around 1mkf, or even smaller, which will reduce the range but also the sound distortions |
| Question: | Crossover Capacitor what frequency? so i know where to set my midrange |
| Answer: | Set your mid range at about 5k |
| Question: | What frequency is the capasitor crossover |
| Answer: | The frequency range for the tweeter is 2k... so i believe the capacitor should be in that range |
| Question: | is this driver 4ohm or 8 ohm, why does it saw 4-8ohm? thanks |
| Answer: | 8 ohm |
Product features
2 Inch Car Speaker Tweeter
This high powered audio projection tweeter system has a maximum power output of 700-watt peak power / 350 watt RMS so you can play your favorite tracks as loud as you want and with style
2” KAPTON VOICE COIL
Pyle Pro follows the standard size for most car stereo systems and created this 2 inches super titanium car audio tweeter speaker with 2” high-temperature Kapton voice coil. Additional feature includes mylar crossover capacitor
700 WATT POWER
This high powered audio projection tweeter system has a maximum power output of 700-watt peak power / 350 watt RMS so you can play your favorite tracks as loud as you want and with style
EASY TO INSTALL
2 Inch Car Speaker Tweeter - Heavy Duty 700 Watt High Power Super Titanium Audio Tweeter are easy to install, mounting hardware materials are included
2Way Custom Component Speaker System 6.5” 400 Watt Component with Electroplated Steel Basket, Butyl Rubber Surround & 40 Oz Magnet Structure Wire Installation Hardware Set Included Pyle PLG6C
Pyle
Product description
Pyle Model : PLG6C
6.5'' 2Way Component Speaker System
6.5'' 400 Watt 2Way Custom Component System
Get in gear with the Pyle Gear series These speakers are designed to provide the best quality sound for the budgetminded enthusiast. You'll be blasting your tunes and rocking the block with this component speaker kit. It includes one pair of 6.5' midbass speakers, one pair of 0.5' tweeters, one pair of passive crossover devices, a wiring kit, grills, and installation hardware it's a perfect way to upgrade and expand the range of your factory system. The midbass speakers pump with 400 watts of power and fit in most OEM locations. The 100watt, 0.5' silk dome tweeters have three mounting options and a frequency response from 1.3 to 22 kHz. Use the passive crossover networks to separate the signal from your headunit between the midbass and tweeter speakers for a richer, more accurate sound. You'll hear everything you were meant to hear with Pyle Gear.
Part of Pyle's Gear series, this component kit is designed to provide the best quality sound for the budget-minded. Includes one pair of 6.5-inch mid-bass speakers, one pair of 0.5-inch tweeters, one pair of passive crossover devices, a wiring kit, grills, and installation hardware--it's a perfect way to upgrade and expand the range of your factory system.
6.5-Inch Mid-Bass Speakers
These mid-bass speakers pump out 400 watts of power, and with standard 6.5-inch sizing, will fit in most OEM locations. A brilliant yellow poly injection cone provides great rigidity and resistance to harsh weather conditions. A non-fatiguing butyl rubber surround and high-temperature aluminum voice coil mean you'll get years of performance without the wear and tear. The speakers are housed in electroplated steel baskets, and boast a 40-ounce magnet.
1/2-Inch Tweeters
The included 100-watt 0.5-inch tweeters have three mounting options and a frequency response from 1.3 to 22 kHz. The neodymium magnet and silk dome construction help enable clear, well-defined high-end. Choose from flush, surface, or angle mounting to optimize your vehicle's mounting locations and get the best possible treble focus.
Passive Crossover Networks
Also included are a pair of passive crossover networks, with a 12 dB octave slope, to separate the signal from your head unit between the mid-bass and tweeter speakers for a richer, more accurate sound.
Easy Installation
A full wiring kit and all the installation hardware you'll need to add this system to your vehicle are included, along with a wiring diagram.
About Pyle Audio
Pyle Audio's legendary car audio products have acquired devoted fans worldwide. With the recent rapid developments in mobile video technology, Pyle has been on the forefront, making quality systems available at affordable prices. We have also expanded our product scope to include neon and LED lighting accessories, as well as vehicle security systems.
Historically, Pyle Audio has been strictly a car audio manufacturer. This is no longer the case, thanks to our increasingly popular and successful Pyle Pro division. In just a few short years, Pyle Pro has come to be recognized as THE source for professional audio equipment at reasonable prices. We have proven that professional products and exorbitant pricing are not necessarily synonymous.
PLG6C Specs
What's in the Box
Pair of 6.5-inch mid-bass speakers, pair of 0.5-inch tweeters, pair of passive crossovers, grills, wiring kit, installation hardware, and wiring diagram template.
- 6.5” Mid Bass Speakers: The 6.5 inch woofer features an eye catching yellow color poly injection cone; Non fatiguing butyl rubber surround keeps your speakers secure and ensures that the product will last for a long period of time
- High Quality Sound: Listening to good music while on the road has never been this good; The component audio speaker has high temperature ASV voice coil which provides the richest sound, ensuring low distortion and providing an open sound stage
- Heavy Duty Component:The 40 oz magnet structure, special electroplated steel basket, and 0.5” silk dome tweeter are what power these speakers and allow for a 90 Hz to 20 kHz frequency response; It features Standard 6.5” size that fits OEM locations
- Multiple Mounting Options: Allows 3 mounting Options flush, surface or angle; This 4 ohm component also features a mounting depth of 2.65”, ensuring your speakers will stay in place
- Wiring Kit Included: This audio speaker compensates the undersized wire found in many of today’s cars; Includes grills, wires and mounting hardware; Midrange tweeter helps to provide smooth & loud sound
- 400watt 2way custom component system includes pair of woofers, tweeters, and crossovers
- 6.5inch woofers with yellow poly injection cones and butyl rubber surrounds
User questions & answers
| Question: | i will be installing these in my Toyota scion TC do i need to install these little cross over things or can i rock with out them please help |
| Answer: | Hello friend the unit support Carplay and Android Auto, if your car is Android system ,it will suitable and please note this unit is International Standard Double DIN , as long as your car is 2 DIN. It will fit very well. |
| Question: | I might pair these with boss ch6530 chaos series 6.5-inch 3-way speakers. which ones should i put in the front door |
| Answer: | Hello friend the unit is 7 Inch double din, it support Android auto and Carplay, if your car is double dDin, it will suitable regards Jacky |
| Question: | it states free shipping yet the item was $35.54..yet my total was $44.96 ????? where did the $9.42 go to |
| Answer: | On the description of the radio they list the Iphones that are compatible.. |
| Question: | will they fit in a Harley davidson sattle bag |
| Answer: | It works with my iPhone 11 |
Product features
2Way Custom Component Speaker System 6.5” 400 Watt Component with Electroplated Steel Basket
Get in gear with the Pyle Gear series These speakers are designed to provide the quality sound for the budget-minded enthusiast. You'll be blasting your tunes and rocking the block with this component speaker kit. It includes one pair of 6.5' mid-bass speakers, one pair of 0.5' tweeters, one pair of passive crossover devices, a wiring kit, grills, and installation hardware - it's a perfect way to upgrade and expand the range of your factory system. The 100-watt, 0.5' silk dome tweeters have three mounting options and a frequency response from 1.3 to 22 kHz. Use the passive crossover networks to separate the signal from your headunit between the mid-bass and tweeter speakers for a richer, more accurate sound. You'll hear everything you were meant to hear with Pyle Gear.
Latest Reviews
View all
Heat Lamp Bulb
- Updated: 31.01.2023
- Read reviews
Apple Cordless Drills
- Updated: 26.03.2023
- Read reviews
Organic Fertilizer For Corns
- Updated: 26.01.2023
- Read reviews
Lipton Iced Tea Bags
- Updated: 09.02.2023
- Read reviews
Hunter Quality Fans
- Updated: 27.04.2023
- Read reviews