Product description

Get the most out of you car stereo system with the Pioneer 4” 2-way speaker system. The 150W peak power handling makes this speaker ideal for the car stereo enthusiast. The wide frequency range from 45Hz to 14kHz provides deep bass and crystal clear vocals.

• POWERFUL SOUND - 150W MAX peak power handling makes this speaker ideal for the car stereo enthusiast and brings the power of Pioneer speakers into your vehicle for high quality sound.
• PIONEER QUALITY - 2 way speakers combine the highs and lows of a tweeter and subwoofer all in one.
• HD AUDIO - The wide frequency range from 45Hz to 14kHz provides deep bass and crystal clear vocals.
• AFFORDABLE - Get the most out of you car stereo system with the Pioneer 4 2-way speaker system at a fraction of the price.

User questions & answers

Question:	How wide are the mounting hole dimensions
Answer:	About the same size of the previous
Question:	How do the covers attach to the speakers? Snap on
Answer:	S Yes sir
Question:	Can these be top or bottom mounted
Answer:	I'm pretty sure they can b both as long as ur hole is the right size
Question:	What is the depth of speakers
Answer:	Measuring from the front of the speaker mount to the back of the magnet is 1.750"

Product description

The R14X2 is a 4” 2-way full-range speaker rated at 30 watts RMS for a new generation of factory replacement speakers. Kit includes two speakers with grilles, integrated high-pass crossovers and mounting hardware.

• The R14X2 is a 4” 2-way full-range speaker rated at 30 watts RMS for a new generation of factory replacement speakers. Kit includes two speakers with grilles, integrated high-pass crossovers and mounting hardware.
• Vacuum Polypropylene cone, Rubber surround, Stamped steel basket, Silk dome flush mounted tweeter, Integrated tweeter crossover, Grilles and mounting hardware included, 1 Year Standard Warranty.
• Midrange Depth (in/mm): 1.72" (43.6 mm), Tweeter Diameter (in/mm): 0.50" (12.7 mm)
• Nominal Impedance (Ohms): 4-Ohm, Frequency Response (Hz): 100Hz - 20kHz
• Sensitivity (dB @ 1W/1M): 85, Crossover: Tweeter High-Pass (HP): 6dB/octave

User questions & answers

Question:	Other reviewers recommended buying these w/ a sub woofer. Would it make that much of a difference in sound quality to purchase them without the sub
Answer:	It will absolutely make a huge difference without a sub woofer. I have these in my Jeep Grand Cherokee rear doors and they have very little bass. Clear sound for the price and I would buy them again but very little low end.
Question:	Do these come with the rockford fosgate grills
Answer:	Did not come with grills.
Question:	Out of the box, do these come with a speaker harness already attached/assembled or should I buy them when I order a set
Answer:	These come with a set of wires with spade terminals on them. The end of the wires are tinned and setup to be installed directly to an amp.or soldered to an existing wire. If you don't want to cut factory wiring a harness adapter or quick splice will be needed.
Question:	What is the distance between the screw holes? Just making sure they would fit
Answer:	I'm not sure but I'm sure they will fit. If they screw holes are off you can always make new ones

Product features

Rockford Fosgate R14X2 Prime 4-Inch Full Range Coaxial Speaker

The R14X2 is a 4” 2-way full-range speaker rated at 30 watts RMS for a new generation of factory replacement speakers. Kit includes two speakers with grilles, integrated high-pass crossovers and mounting hardware.The 4" Prime full-range speakers offer Rockford Fosgate sound quality at a fantastic value. Perfect for replacing factory speakers, they feature polypropylene cones and a silk dome tweeter. Includes grilles so they look as good as they sound.

ICC Crossover

The Integrated Concealed Crossover hides the crossover inside the basket, creating a cleaner look and easier installation.

• Features EVC technology for improved woofer performance
• Includes 2 4-inch coaxial speakers with 0.5-inch tweeters for rich sound detail
• Neodymium tweeter magnets let you ramp up the volume at high frequencies
• UV-treated polyester woofer surround resists heat and sunlight
• Made to fit most cars

User questions & answers

Question:	Can these go in a 1up modded arcade? Will they rattle? Send static to my screen
Answer:	Will they rattle? I doubt it. Fairly solid and good sounding speaker. It will not produce much bass due to its size. As far as your screen goes, any non-shielded speaker will interfere with certain screens using cathode ray. Most modern LED and LCD screens should not be affected by magnets.
Question:	Are these water resistant enough to use on a Honda Goldwing
Answer:	No, they are not water resistant. I would not expose them to wet environment
Question:	What’s the cutout size
Answer:	4 inches
Question:	Is that 50w rms for the pair or per speaker
Answer:	Per speaker

Product features

KICKER CS Speakers

The CS-Series delivers remarkable performance and ultra-clean bass, utilizing a heavy-duty motor/magnet structure with EVC (Extended Voice Coil) for even deeper lows. Polypropylene cones and ribbed, UV-treated surrounds work together for excellent reliability and precise acoustic control.

4 Component Options

• 6x9" 4 Ohm - model: 46CSS694
• 6x8" 4 Ohm - model: 46CSS684
• 6.75" 4 Ohm - model: 46CSS674
• 6.5" 4 Ohm - model: 46CSS654

8 Coaxial Options

• 3.5" 4 Ohm- model: 46CSC354
• 4" 4 Ohm- model: 46CSC44
• 4x6" 4 Ohm- model: 46CSC464
• 5.25" 4 Ohm- model: 46CSC54
• 6.5" 4 Ohm- model: 46CSC654
• 6.75" 4 Ohm- model: 46CSC674
• 6x8" 4 Ohm- model: 46CSC684
• 6x9" 3-Way 4 Ohm- model: 46CSC6934

3 Tweeter Mounting Options

• Flush
• Surface
• Angled

Product description

New Reference speakers are designed to deliver Infinity’s signature sound in more vehicles. They feature edge-driven textile tweeters for smooth, clear highs and the larger models offer an adjustable tweeter output level control for high-frequency optimization based on installation location or the listener's preference. Oversized Plus One woofers offer more surface area for higher bass output and enhanced midrange performance. Plus our newly engineered baskets are optimized to fit most factory speaker locations. In The Box: 1 pair of coaxial speakers Foam mounting tape Owner’s manual Description - 4" (87mm) coaxial car speaker Power Handling - 35W RMS, 75W peak Sensitivity (@ 2.83V) - 92dB Frequency Response - 75Hz – 21kHz Impedance 3.0 ohms The audiophile-grade tweeters used in Infinity's new Reference speakers deliver smooth, non-fatiguing sound even at high output levels. Harman’s patented (US patent #7,548,631) Plus One cones provide more overall speaker-cone area than other cones in its class — the result is higher sensitivity, increased low-frequency output and accurate music reproduction. Reference speakers provide step-up Infinity sound at mainstream prices.

• Edge-driven textile tweeters for smooth, clear highs.
• Oversized Plus One woofers offer more surface area for higher bass output and enhanced midrange performance.
• Newly engineered baskets are optimized to fit most factory speaker locations.
• Competitive pricing - Reference speakers provide step-up Infinity sound at mainstream prices.

User questions & answers

Question:	do they have bass blockers
Answer:	These speakers are shipped with a crossover in the box with them. We highly recommend that they are used to give the speakers the longest life possible.
Question:	Do they come with grill guards or is it just the speakers
Answer:	No.
Question:	Is it a pair of speakers or not
Answer:	It’s for a pair of speakers. I used them in my Jeep JL Wrangler. Sound good.
Question:	what's the depth of the speaker (mount Depth
Answer:	Depth is 1 7/8 I am pleased with the sound. About 1/2 cubic foot box with 2. Tweeters can be tapped to attenuate.

Product description

Pyle Model : PL42BL

4'' 180 Watt 2-Way Speakers

4'' 180 Watt Two-Way Speakers

One Pair 4'' Two-way Speaker Systems

Power Handling: 90 Watts Rms / 180 Watts Max

Non-fatiguing Butyl Rubber Surround

3/4'' High Temperature ASV Voice Coil

Standard 4'' Size Fits OEM Locations

Blue Poly Injection Cone

20 oz Magnet Structure

1/2'' Neodymium Film Dome Tweeter

Impedance: 4 Ohm

Sensitivity: 88 dB

Frequency Response: 110Hz - 20Khz

Mounting Depth: 1.95''

Pyle's Blue Label series speakers don't just sound great - they look great, too. Feast your eyes upon the azure curves of Pyle's Blue Label series and you'll agree. They're great replacements for your vehicle's factory speakers - you'll hear the difference immediately. Included in this package is a pair of round 4' two-way 180 watt speakers - carrying both the high and low end for a fuller range sound. The non-fatiguing butyl rubber surround keeps your speakers secure as well as extending the life of the product. A ¾' high-temperature ASV voice coil provides the richest sound, ensuring low distortion and providing an open sound stage. The blue poly injection cone looks great and allows your music to resonate with full power. The 20 oz. magnet structure and ½' neodymium film dome tweeter are what power these speakers and allow for a 110 Hz - 20 kHz frequency response. Trust Pyle to provide quality sound at a competitive price.

• 110Hz - 20Khz FREQUENCY RESPONSE: Pyle, 4” two way sound speaker system has a 20 oz magnet structure, 1/2'' neodymium film dome tweeter and frequency response. This car speaker is pack with exceptional 88dB (1w/1m) decibel sensitivity
• 4-OHM IMPEDANCE: This car speaker has 4-ohm impedance rating that compensates the undersized wire found in many of today’s cars. The blue poly injection cone also looks great and allows your music to resonate with full power
• 3/4'' ASV VOICE COIL: Pyle car sound speaker system is capable of 3/4'' high-temperature ASV voice coil. It will increase performance and efficiency of heavy-duty play time through lower weight and higher operating temperatures
• 90W RMS AND 180W PEAK: This 4” car speaker can provide up to 90 watts RMS or 180 watts peak power because it is 20 oz magnet structure. A pair of round 4’’ 180 watt speakers - carrying both the high and low end for a fuller range sound
• LOUD AND CLEAR: Pyle car speaker were carefully combined to reproduce sound clearly with outstanding responsiveness. The non-fatiguing butyl rubber surround keeps your speakers secure as well as extending the life of the product
• 3/4" high temperature ASV voice coil
• 1/2" neodymium film dome midrange
• Includes grills, wires and mounting hardware

User questions & answers

Question:	will these fit my '05 silverado
Answer:	Yes, they should. But I don't recommend these speakers, I put them in my '90 Chevy 2500 P/U with a Kenwood KDC-152, and these speakers get distorted on low volume, and have little to no bass. (even the desirable type). But that's just my feelings toward it.... but yes. these should ft your '05 Silverado.
Question:	What is this "Mounting Hardware"? I got these and only got the speakers and the wires
Answer:	i think this person ment were its the mounting harwdware... u should have got 8 screws with it.
Question:	Do these speakers glow or is the background color just blue
Answer:	They do not glow. The blue is just the color of the speaker cone and wouldn't be seen any ways once speaker cover is installed.
Question:	Some Of the higher end speakers like have lower watts with better sound Why
Answer:	There is a big difference from the specs you see on the box to what you here in person. Coaxial/Triaxial speakers use mF(micro-ferrad) capaciters to crossover the mids and tweeters, thus removing lower frequency's that will destroy each separate component of the driver. Where speakers tend to sound different, better or worse has to do with a few things. Quality of materials, the capacitors mentioned above can take a high quality speaker and make it sound like garbage, respectively they can make a low quality speaker sound great. Also just the way the engineering teams voice the speaker can be totally different. Kicker tends to be boomy with the mids stuffed down and the highs bright. This can cause a problem at high volumes where the tweeters becomes piercing and loud. I've noticed that Dual speakers tend to be uncontrollably loud at 1.5-3 khz (again, the capacitors used are most likely what cause this). Two way speakers with a fabric dome tweeters tend to be less harsh then a cheaper driver with a plastic coned mid and piezo tweeter set All in all, I don't recommend buying speakers online without first auditioning them in person. On the more expensive end, you could be setting your self up for a let down. And if you pay 25 or less for speakers... Well, you got what you paid for. Now specs. The almighty MAXX WATTAGE! this number for any speaker is a joke. It's intended for you to be dumb enough to blow them up in 10 minutes by overdriving the amplifier (wheather from a head unit or amp). What's probably more important is it's rated efficiency. When going off wattage specs, only use the RMS specs. You will notice MAXX wattage of 450, while the RMS is sitting at 35. Because when you drive the head unit to that 50W max x 4 and are only getting 18 x 4, you turn it up even louder and turn clean power into dirty power. This dirty power overheats your speakers coils then they blow out. Because that 72 Watts destroyed a 450 Watt speaker set! Make sense yet? The more important chooch factor that releases sound, would be the sensitivity rating. 1watt @1meter. The closer to 100 this number is, the more efficient the speaker is. The better speakers will be 90/91db.

Product features

Pyle 4'' x 6'' Three Way Sound Speaker System

Pyle's Blue Label series speakers don't just sound great - they look great, too. Feast your eyes upon the azure curves of Pyle's Blue Label series and you'll agree. They're great replacements for your vehicle's factory speakers - you'll hear the difference immediately. The blue poly injection cone looks great and allows your music to resonate with full power. Trust Pyle to provide quality sound at a competitive price.

Product description

4" G-Series 2-Way Car Speakers Power Handling: Peak: 420 watts per pair / 210 watts each RMS: 60 watts per pair / 30 watts each Injection molded polypropylene with mica cone Rubber coated cloth surround 1-3/16 Balanced dome tweeter Progressive Flex Suspension System spider gives extra support to the voice coil Ferrite magnet motor structure Top-mount Depth: 1-3/4" Cutout Dimensions: 4-1/4" 4 ohms impedance Frequency Response: 35 - 27000 Hz Sensitivity: 87dB

• Power Handling: Peak: 420 watts per pair / RMS: 60 watts per pair
• Injection molded polypropylene with mica cone
• Rubber coated cloth surround / 1-3/16 Balanced dome tweeter
• Top-mount Depth: 1-3/4" / 4 ohms impedance
• Frequency Response: 35 - 27000 Hz / Sensitivity: 87dB

User questions & answers

Question:	yhese do come with covers
Answer:	Yes
Question:	yhese do come with covers
Answer:	Yes
Question:	How do u wire these 2 a left/right option amp... which wire is positive ? White or black n white
Answer:	It don't make any difference. they will work unless your wiring for surround sound
Question:	How is this quality
Answer:	Quality is quite good. I installed these as replacement of the original speakers in the doors of my truck.

Product features

P.F.S.S. Spider

Progressive Flex Suspension System supports the voice coil effectively by dampening the large cone vibration and enhancing linearity of sound reproduction. Its soft part makes movement smooth and reproduces clear sound and at excessive input, its hard part controls excessive vibration and prevents movement error.

Product description

Light-up your ride with new Boss Audio Systems rage Series speakers. The rage Series line-up features a Blue led-illuminated cone design that is sure to add that "just-right" custom look for any system application.

• Cone - Made from polyurethane, the BE423 4 inch car speakers provide a resilient and durable material that can offer great sound with the advantage of long-lasting speakers
• Voice Coil - Our voice coils are able to withstand high temperatures yet maintain its strength and fatigue properties. This gives our speakers the advantage of longer play times with lower weights
• Surround - Rubber has the ability to endure much punishment without any sign of damage. It complements the whole structure of the speaker by allowing constant abuse where it is most needed, without the wear and tear
• Basket - The stamped basket offers a strong and rigid platform allowing the listener to hear clean and clear music output
• Tweeter - A piezoelectric tweeter is more resistant to overloads and can be used without a crossover due to its’ electrical property
• Specs - Impedance: 4 Ohms, frequency: 100 Hz to 18 kHz, dimensions: 4” x 4” x 2.25”, mounting depth: 1.75”, mounting hole: 3.67”, weight: 2.6 Lbs. (Pair)
• Warranty - BOSS Audio Systems provides a powerful 3-year platinum online dealer warranty so long as the purchase is made through Amazon.com. We strongly encourage professional installation of this product to ensure proper and safe functionality

User questions & answers

Question:	How do you control volume on these speakers
Answer:	If it is in a car, and wired properly, you control the volume from the stereo deck inside your car. In my case I installed them inside of an arcade build, and you need to have an amp to give them power and control volume. I used a Mini Kinter amp (they are like $10-15), and that has a built in volume controller (the Kinter amp is good if you want to hook them up at your desk, or inside of a build you intend). Hope this helps.
Question:	I only got one set of wires. Do these speakers come with two sets of wires
Answer:	Yes
Question:	How to get wire diagram for bose 600W bluetooth motorcycle speakers
Answer:	On the speakers it shows -for negative and +positive. If you need the diagram for your vehicle check with the manufacture or obtain a repair guide for your vehicle. Or check the wires/plug with a volt meter to see which wire is positive.
Question:	Are these speakers waterproof, want to install on my GL1500 goldwing
Answer:	Hello, The BE423 is not waterproof, and we do offer water-resistant speakers in 6.5 inches such as MRGB65B. Thank you.

Product features

Rage BE423

Light-up your ride with new BOSS Audio Systems RAGE series speakers. The RAGE series line-up features a blue LED-Illuminated cone design that is sure to add that 'just-right' custom look for any system application.

Product description

4-Inch Dual Cone Replacement Speaker, Individually Packaged In Clamshell

• Impedance: 4 Ohms, Frequency Response: 100 Hz - 18 kHz, Sensitivity: 82 dB
• Cone: Polypropylene, Voice Coil: 1 Inch Aluminum
• Surround: Foam, Basket: Stamped
• Dimensions: Depth 4.1” x Width 4.1” x Height 1.8”, Weight Per Pair: 1 Lbs.
• 3 Year Platinum Online Dealer Warranty

User questions & answers

Question:	What the the bolt hole center to center dimension of the BRS65 speakers
Answer:	We use the industry standard for 6.5" speakers mounting holes.
Question:	Is it a pair of speakers or just one speaker
Answer:	Just one at a time. So you really have to order 2 of them if you need a pair. Sold at unit.
Question:	is it important to use the plastic mounting ring
Answer:	Not if the speaker fits without them. I installed them in the front doors in my old Escort without them and they work fine.
Question:	What is the ohm rating on these speakers
Answer:	4 ohm's

Product description

The Skar Audio TX4 are 4-inch, high-performance, 2-way coaxial speakers engineered and designed for the audiophile seeking sound perfection. The elite series of TX speakers are extremely powerful and efficient, delivering an unrivaled listening experience at the loudest volumes. Engineered for sound excellence, these 4" speakers utilize a high quality 1.25-inch copper voice coil as well as a premium ferrite magnet, providing more than enough power to bring your music alive. The glass fiber cone coupled with the premium TPE surround of the mid-range portion of these coaxial speakers allow them to be extremely responsive across a wide range of frequencies. Furthermore, the TX4 coaxial speakers feature 1-inch high fidelity silk dome tweeters that deliver incredibly rich, high frequency sounds, with audiophile grade clarity. Sold as a pair. Impedance: 4 ohms. Frequency Response: 60 Hz - 21 kHz, Sensitivity: 87 dB. Peak Power: 120 Watts (Pair), RMS Power: 60 Watts (Pair). Mounting Depth: 1.96", Speaker Grilles are Included with this Set of Speakers.

• 60W RMS per pair
• 1.25" copper voice coil
• TPE surround
• Fiberglass cone

User questions & answers

Question:	Does the 4" come with grills
Answer:	Yes, mine did.
Question:	hows the bass
Answer:	My son said 4 stars out of 5 !
Question:	will these fit in the dash 07 jeep grand
Answer:	you will have to measure the application and see if the specs will fit. There are no auto specific guides.
Question:	will `this fit 1996 geo tracker
Answer:	Measure and compare to specs

Product features

Technical Specifications

• RMS Power: 60 Watts (Pair)
• Max Power: 120 Watts (Pair)
• Impedance: 4 Ohms | Sold as a Pair
• 1" (25.4mm) High Grade Silk Dome Tweeter
• Glass Fiber Cone
• 1.25" Copper Voice Coil
• Frequency Response: 60 Hz - 21,000 Hz
• Sensitivity: 87 dB
• Mounting Depth: 1.96"
• Cutout Diameter: 3.85"

Product description

Brand New ROCKFORD FOSGATE R142 4" Prime Series 2 Way 100 Watt (Pair) Full-Range Car Speakers Features: 1/2" (13mm) mylar balanced dome tweeter Foam surround Mica-injected polypropylene cone Stamped steel basket

Product description

High-sensitivity design. High quality product. Manufactured in Mexico. The product is of good quality.

• High-sensitivity design
• High quality product
• Manufactured in Mexico

User questions & answers

Question:	What's The Power Watts on them
Answer:	These will handle up to 50 watts per channel.
Question:	What is the RMS watrage for each speaker
Answer:	It's actually 50w according to the jbl website.
Question:	How is the bass quality/range? Looking for something with good mid range to compliment a subwoofer. Thanks
Answer:	These speakers have a tight bass, and I think they would be a good compliment to a sub. I’m driving them with a Kenwood head unit, but think they could use a bit more power, however they are very efficient.
Question:	does this come with brackets and screws
Answer:	Yes. Has brackets for mounting if speaker does not align with your vehicles existing opening. Also comes with screws but I purchased better quality as the ones included were not very good. These are excellent speakers and I have them installed in Dodge RAM 2500 Rear door panels.Make sure you buy the speaker wire adapters for your vehicle model. Makes wiring easier.

• The Punch P142 is an impressive 2-way full-range speaker designed for fanatics who need a high quality factory replacement in an easy to install package
• The P142 4.0” 4-Ohm black speakers come as a pair, have a power handling of 30 Watts RMS/60 Watts Max and include mounting hardware and OEM adapter plate
• Featuring a PEI dome tweeter with built-in crossover and injection molded mineral filled polypropylene cone with butyl rubber surround that provides high output and accurate frequency reproduction
• FlexFit basket design utilizes slots instead of single screw sized holes that allow for a slight adjustment of the speaker when aligning with OEM mounting holes for a better fit
• Famous Rockford Fosgate build quality with a full 1-year warranty when purchased from an authorized Rockford Fosgate reseller

User questions & answers

Question:	Should I get an amp for these
Answer:	If you are using the stock head unit without a subwoofer I would say No Amp. I did not install an amp and the sound quality is great! Way louder than my facoty speakers.
Question:	does it come in pairs
Answer:	Yes brand new in the box each pair comes with 2 speakers
Question:	Do you need an amp for these speakers or are they fine without one
Answer:	They will work and give pretty good sound without one, depending on the watts of your head unit. But they definitely sound better with an amp
Question:	About how many ohms do these speakers need
Answer:	They are 4ohm speakers

Product features

Audio Fanatics Upgrade their Factory Sound with Rockford Fosgate!

The P142 is a pair of 4” 2-way full-range speakers rated at 30 watts RMS and designed for audio fanatics needing a quality factory replacement. The P142 offers a Flex Fit basket to ensure compatibility with odd shaped factory speaker locations and an ICC (Integrated Concealed Crossover), eliminating the need to mount any black boxes. The PEI dome tweeter provides accurate frequency reproduction as well as high volume output. The P142 is exactly what you need to replace your OEM factory speakers with, impressive sounding speakers built with high quality materials in an easy to install package.

The P142 Includes:

• 1 Pair of 4" 2-way Full-Range Speakers
• Mounting Hardware
• Adapter Plates: 4"x6" & 6"x8"

Flex Fit Basket Design

The slot mounted frame pattern of the Flex Fit basket utilizes slots instead of single screw sized holes. This allows for a slight adjustment of the speaker when mounted for a better fit.

Injection Molded Cone

Our high strength injection molded polypropylene cone is rigid and lightweight to minimize any cone flex during use, improving the speakers overall sound quality while reducing potential distortion

Integrated Crossover

The Integrated Concealed Crossover hides the crosssover inside the basket, creating a cleaner look and easier installation. It also ensures the right frequencies are sent to the proper driver for the best quality sound with maximum protection.

Product description

-

• 240 WATT POWER: Pyle offers a pair of car speakers with a power of 120 Watt RMS to 240 Watt peak with 4 ohm impedance that will produce high-quality sound resonance. Play your favorite tracks as loud as you want and with style
• 4 INCH SPEAKERS: A clean-cut automotive speaker that boasts the size of 4.02” x 4.02” x 2.09” black high-quality poly injection speaker cone. Enhances car stereo by producing powerful audio sound. Also has 20oz high-density rubber magnet boot
• 1/2 INCH DOME TWEETERS: These speakers for the car are made entirely of massive butyl rubber surround for durability. The two-way coaxial speaker system introduces ½” neodymium film dome tweeter in each speaker that ensures low distortion
• ASV VOICE COIL: The voice coil in this coaxial speaker is a dual ¾” high-temperature ASV to resist corrosion. Designed w/ non-fatiguing rubber suspension to keep equipment safe. These speakers are vehicle door & side panel mount compatible
• 1.81” MOUNTING DEPTH: Easy to install with its 1.81” mounting depth and fits most audio system for cars, boats, motorcycles or RVs. Included are the necessary cables, speaker grills, and mounting hardware for a quick and hassle-free setup

User questions & answers

Question:	will it fit a jeep jku
Answer:	Hi, the diameter of the unit will fit your vehicle. However, you have to measure the mounting depth so we can easily fit the speaker there. Thank you.
Question:	Can this fit a 2012 Toyota yaris
Answer:	Hi, yes this answer is correct "If u installed an aftermarket radio and have the RCA plugs in it u sure can" Thank you both.
Question:	Can this work on my 2004 nissan y11 ad wagon
Answer:	Hi, our sincere apologies but we don't have accurate information here about your car. The Product Dimension: 4.02'' x 4.02'' x 2.09'' inches and the mounting depth is1.81'' inches. Thank you.
Question:	Will these fit my 2006 Toyota tundra
Answer:	you will need an adapter, The whole's don't line up.

Product features

2-Way Universal Car Stereo Speakers

These speakers for the car are made entirely of massive butyl rubber surround for durability. The two-way coaxial speaker system introduces ½” neodymium film dome tweeter in each speaker that ensures low distortion

ASV VOICE COIL

The voice coil in this coaxial speaker is a dual ¾” high-temperature ASV to resist corrosion. Designed w/ non-fatiguing rubber suspension to keep equipment safe. These speakers are vehicle door & side panel mount compatible

240 WATT POWER

Pyle offers a pair of car speakers with a power of 120 Watt RMS to 240 Watt peak with 4 ohm impedance that will produce high-quality sound resonance. Play your favorite tracks as loud as you want and with style

EASY TO INSTALL

The Pyle 2-Way Universal Car Stereo Speakers are easy to install, mounting hardware materials are included

Product description

JBL Stage3 speakers bring patented technologies, world-class engineering and JBL pro sound heritage together to create a powerful line of car audio loudspeakers. Focusing on performance and fitment, they bring unrivaled sound performance to your vehicle. The high output 2 ohm DCR design extracts every watt of power from the amplifier or head unit enabling the patented Plus One woofers to deliver high output and solid deep bass performance. Our rigorous OEM-level reliability testing provides peace of mind when it’s time to crank it up for that inimitable JBL adrenalin surge.

• JBL Premium Sound Quality at an Affordable Price
• Plus One Woofers Cones provide a larger surface area which results in an increase in overall efficiency by up to 2dB. This provides superior output and performance when used as an upgrade to a factory system
• Edge-driven Dome Tweeter deliver broader and smoother high frequency response
• Engineered to Fit
• Vented basket Frame design help to cool the voice coils making for a reliable speaker

User questions & answers

Question:	One of the reviews said they received the speakers, but they came without grills. Is that correct
Answer:	Our JBL Stage 3527 comes with grilles for each speaker.