Product description

Lanzar Model : HTG157

3000 Watt 2 Ohm Stable Mono Block Mosfet Amplifier

1 x 650W RMS @ 4 OHMS

1 x 1250W Peak @ 4OHMS

1 x 1500W RMS @ 2 OHMS

1 x 3000W Max @ 2 OHMS

Electronic Crossover Network

Bass Boost Circuit

2 Ohm Stable

Nickel RCA Inputs

Line Outs for Left and Right Channel

Low Pass Filter Controls

Power and Protection LED Indicators

Soft Turn-on/Turn-off

THD: <0.01%.

S/N Ratio: >90dB

Freq. Response:10Hz~45KHz

LPF Freq. Response: 50Hz-250Hz

HPF Freq Response:80HZ

Fuse: 40A x1

Dimensions:12.99''(L) x 2.24''(H) x 8.81''(W)

• AUDIO EVOLUTION: This amplifier car audio features excellent frequency response rates and crossover network that place these amps in a class of their own
• SOUND SPECIALIZATION: This high-powered Power Amplifier is cutting edge technology at its finest Nickel-plated RCA connectors and speaker screw-down terminals ensure a secure connection between amplifier and speakers that allow distortion-free sound
• INTELLIGENT DESIGN: The amplifier monoblock features include power and protection LED indicators; soft turn-on/off; and 1 channel amp design
• RCA JACKS: The Line-Out jacks allow you to build multiple amplifier systems without having to use splitter cords to distribute the signal This makes it easier to bring one set into the first amp, then use the line out jack as the feed to the next amp
• GREAT DEAL: Often a monoblock amp comes with a high price tag Yet the Lanzar mono amplifier is budget friendly with all the features, reducing crosstalk between channels

User questions & answers

Question:	Can I use this for my
Answer:	Yes, 2 fuse
Question:	Will this push 2 12" kicker comp r at 2 ohm
Answer:	Bought it a year ago and it sat in my closet. Never opened and went to install it. It didnt work. This is crap
Question:	do it have any fuse
Answer:	Yes
Question:	i have no sound.how do you get it to work
Answer:	….if the amp actually worked, yes. Sadly mine did not, nor did the replacement.

Product features

Lanzar Amplifier Car Audio, Amplifier Monoblock, 1 Channel, 3,000 Watt, 2 Ohm, MOSFET, RCA Input, Bass Boost, Mobile Audio

• 1 x 650W RMS @ 4 OHMS
• 1 x 1250W Peak @ 4OHMS
• 1 x 1500W RMS @ 2 OHMS
• 1 x 3000W Max @ 2 OHMS
• Electronic Crossover Network
• Bass Boost Circuit
• 2 Ohm Stable
• Nickel RCA Inputs
• Line Outs for Left and Right Channel
• Low Pass Filter Controls

• Power and Protection LED Indicators
• Soft Turn-on/Turn-off
• THD: <0.01%.
• S/N Ratio: >90dB
• Freq. Response:10Hz~45KHz
• LPF Freq. Response: 50Hz-250Hz
• HPF Freq Response:80HZ
• Fuse: 40A x1

Product description

Lanzar's Heritage Series Amplifiers provide high-performance sound reinforcement for all of your mobile audio equipment. The versatility enables compatibility with frequency dividing crossover networks and other audio processors to improve virtually any vehicle's customized system configuration. Amplifier features include variable high and low pass filters, RCA inputs, bass boost variability, and plenty more features to evolve your audio.

Features:

• Electronic Crossover Network
• Bass Boost Circuitry
• 2 Ohm Stereo Stable
• RCA InputsLine Output (L/R) Channels
• Low + High Pass Filter Controls
• Power + Protection LED Indicators
• Soft Turn ON/OFF
• 1 x 650 Watt RMS @ 4 Ohm
• 1 x 1250 Watt Peak @ 4 Ohm
• 1 x 1500 Watt RMS @ 2 Ohm
• 1 x 2000 Watt Max @ 2 Ohm
• T.H.D.: <0.01%
• S/N Ratio: >90dB
• Freq. Response: 10Hz - 45kHz
• HPF Freq. Resp.: 80Hz
• LPF Freq. Resp.: 50Hz - 250Hz
• Fuse: 40A x 1
• Dimensions (L x H x W): 13.0'' x 2.4'' x 8.8''
• Sold as : 1

• AUDIO EVOLUTION: This amplifier car audio features excellent frequency response rates and crossover network that place these amps in a class of their own.
• SOUND SPECIALIZATION: This high-powered Power Amplifier is cutting edge technology at its finest. RCA connectors ensure a secure connection between amplifier and speakers that allow distortion-free sound.
• INTELLIGENT DESIGN: The amplifier monoblock features include power and protection LED indicators; soft turn-on/off; and 1 channel amp design.
• RCA JACKS: The Line-Out jacks allow you to build multiple amplifier systems without having to use splitter cords to distribute the signal. This makes it easier to bring one set into the first amp, then use the line out jack as the feed to the next amp.
• GREAT DEAL: Often a monoblock amp comes with a high price tag. Yet the Lanzar mono amplifier is budget friendly with all the features, reducing crosstalk between channels. Please update the listing's title, description, & bullets.

User questions & answers

Question:	I have two infinity refrence subwoofer's. peaks at 2400 watts and 2.4 ohms for each speaker. so 4.8 ohms. think this amp will push it
Answer:	It'll push them but it'll over heat... I have two 15s that peak at 2000, with a nice size capacitor but it still had a hard time performing and kept shutting off... I bought another one, put one on each sub and BOOM BOOM BOOM is all my neighborhood hears when I drive down the street... Plus I changed my alternator to a higher amperage alternator and added a secondary dry cell battery...
Question:	My sub is a kicker cvr 12 4 ohm, 50-400 watts rms (200 watts per coil), can this work
Answer:	Yes, I was running 2 kicker 12s, then went to the 3000 wat version.
Question:	My subs are 4ohm will this work
Answer:	No
Question:	Will it do well without over heating with a 1400 watt pioneer sub
Answer:	I think it depends on the box you go with

Product features

Lanzar Amplifier Car Audio, Amplifier Monoblock, 1 Channel, 2,000 Watt, 2 Ohm

• Electronic Crossover Network, Bass Boost Circuitry
• 2 Ohm Stable, RCA Inputs
• Line Output (L/R) Channels, Low + High Pass Filter Controls
• Power + Protection LED Indicators, Soft Turn ON/OFF
• 1 x 350 Watt RMS 4 Ohm, 1 x 1250 Watt Peak 4 Ohm
• 1 x 900 Watt RMS 2 Ohm, 1 x 2000 Watt Max 2 Ohm
• T.H.D.: <0.01%, S/N Ratio: >90dB
• Freq. Response: 10Hz - 45kHz, HPF Freq. Resp.: 80Hz
• LPF Freq. Resp.: 50Hz - 250Hz, Fuse: 30A x 1
• Dimensions (L x H x W): 13.0'' x 2.4'' x 8.8''

Product description

Lanzar's Heritage Series Amplifiers provide high-performance sound reinforcement for all of your mobile audio equipment. The versatility enables compatibility with frequency dividing crossover networks and other audio processors to improve virtually any vehicle's customized system configuration. Amplifier features include variable high and low pass filters, nickel-plated RCA inputs, bass boost variability, and plenty more features to evolve your audio.

Features:

• 2 x 500W RMS @ 4 OHMS
• 2 x 1000W Max @ 4 OHMS
• 1 x 2000W Max @ 4 OHMS Bridged
• 2 x 650W RMS @ 2 OHMS
• Electronic Crossover Network
• Bass Boost Circuit
• Bridgeable at 4 Ohms
• 2 Ohm Stereo Stable
• Nickel RCA Inputs
• Line Outs for Left and Right Channel
• Low Pass Filter Controls
• High Pass Filter Controls
• Power and Protection LED Indicators
• Soft Turn-on/Turn-off
• THD: < 0.01%.
• S/N Ratio: > 90dB
• Channel Separation: > 65dB
• Freq. Response: 10Hz~45KHz
• HPF Freq. Response: 80KHz
• LPF Freq. Response: 50Hz-250Hz
• Subwoofer Level Control
• Fuse: 40A x 1
• Dimensions: 12.99''(L) x 2.24''(H) x 8.81''(W)
• Sold as : Unit

• AUDIO EVOLUTION: This car speakers amp features regulated MOSFET Pulse Width Modulated that maintain rated power over a wide range of battery voltage. Excellent frequency response rates place these amps in a class of their own.
• SOUND SPECIALIZATION: This high-powered Power Amplifier is cutting edge technology at its finest. Nickel-plated RCA connectors and speaker screw-down terminals ensure a secure connection between amplifier and speakers that allow distortion-free sound.
• INTELLIGENT DESIGN: The car audio amplifier 2 channel safety features include power and protection LED indicators; soft turn-on/off; and thermal, overload, and speaker-short protection.
• RCA JACKS: The Line-Out jacks allow you to build multiple amplifier systems without having to use splitter cords to distribute the signal. This makes it easier to bring one set into the first amp, then use the line out jack as the feed to the next amp.
• POWER INPUT: The mosfet amplifier connections are for input power, chassis ground,& remote turn-on function. Use 8 gauge wiring for power & ground connections. The terminals will handle up to 4 gauge wiring with no negative effect or distortion of audio.

User questions & answers

Question:	Would this particular amp b ideal for 2 6.5s and 2 4x6s
Answer:	Would be more than enough, I use the 1000 watt version to run my 4 6x8's.
Question:	will this be good for 2 12 mtx termenior 400 rms
Answer:	This amp is almost 150 w rms. It is poor in power. I sold mine. In less money than the amount that I pay. Becouse it is poor.
Question:	Is this amp enough for 2 12 kicker cvr
Answer:	I highly doubt youll get 400w out of this amp let alone what it clams. I recommend an apcl15001d if you want real power for cheap. This isnt worth it
Question:	hi, i am looking an amplifier to conect 2 coaxials speakers, two tweeters and a subwoofer ¿how many channels should the amp have
Answer:	Seperate your amps for better sound comtrol the four channel will run your coaxial speaker and run your tweeters then run a mono block single sub amp

Product description

Lanzar Model : VCT2610

6000 Watt 2 Channel High Power MOSFET Amplifier

3000W x 2 Output at 4 Ohms

6000W x 1 Bridged Output at 2 Ohms2 Ohm Stable

MOSFET Power Supply

Variable Hi-Pass : 40 Hz-250 Hz

Variable Low-Pass : 40 Hz-250 Hz

Variable Input Level (Gain) Control : 6V-200mV

Variable Bass Boost : 0-18dB

Variable Subsonic Filter : 10Hz~100Hz, 24dB/Octave

Sub Sonic Switch

Thermal / Overload / Short Circuit Protection

Soft Turn On/Off

Power & Protection LED Indicator

Low Level RCA Input : 10K Ohms

Line Level RCA Output

Frequency Response : 15 Hz-30K Hz

Signal to Noise Ratio: >95dB

THD:0.1 %

2x60 Amp Maxi Type Fuse

Slim Size Amplifier Design For Easy Installation

Dimensions: 10.63''W x1.78''H x 21.97''L

The Lanzar 6000 WATTS 2 Channel MOSFET Amplifier by Lanzar is a quality product designed and engineered to give you many years of uncompromised musical service. VECTOR series amplifiers are designed with the latest technology available, which provides headroom for even the most demanding peaks and dynamic ranges found on modern CDs and recordings.

• 3000W RMS / 6000W MAX POWER: The Lanzar 6000 watt 2 channel high power MOSFET amplifier is perfect for your car stereo entertainment system. It can give 3000W x 2 output at 4 ohms or 6000W x 1 bridged output at 2 ohms for a high quality audio
• FULL RANGE CROSSOVERS: This product features a low / high pass variable crossover for versatility and precise control by being able to fine tune your music. The speaker / subwoofer terminals are to guarantee high conductivity and minimum signal loss
• MOSFET POWER SUPPLY: This powerful amplifier is equipped with metal oxide semiconductor field-effect transistors to quickly switch from full to non-conduction for high efficiency output
• SHORT CIRCUIT PROTECTION: This 2 ch amp is also equipped with a 2x40 amp maxi type fuse to protect the amplifier and the electrical system of your car from thermal / overload / short circuit conditions
• SLIM SIZE DESIGN: Measuring only 10.63''W x1.78''H x 21.97''L, this amplifier has a slim size design and comes complete with all required mounting hardware for easy installation

User questions & answers

Question:	What wattage do these actually do
Answer:	4 ga is the biggest to fit, the amp has the crummy tab plates and is NOT 1 ohm stable. 4 15's will kill this amp
Question:	Will this amp run 2 1200 watt (10”) audiobahn downfire subs
Answer:	This amp over heats to much. Get yourself a class D amp
Question:	What wire gauge for this amp i pushin
Answer:	Hi, you may use a 6.5 sub or speaker as long as it is a below the wattage of this amp ( 3000 watts) at 2 to 8 ohms.
Question:	Can this amp power 2 12-inch Power Acoustik 2500W subwoofers
Answer:	I wouldn't recommend it because the app doesn't like to put out its peak power or even when measured it gave about 3000 Watts peak and when that's converted into RMS it's approximately 1767w rms add two speakers I have a peak of 1200 watts and RMS of about 1696.8w you'll be pushing max power transfer. Which is good unless your subs are rated more then that. What ever peek is x .707 gives you RMS so take that and work it in

Product features

2-Channel High Power MOSFET Amplifier

The Lanzar 6000 WATTS 2 Channel MOSFET Amplifier by Lanzar is a quality product designed and engineered to give you many years of uncompromised musical service.

• 3000W x 2 Output at 4 Ohms, 6000W x 1 Bridged Output at 2 Ohms 2 Ohm Stable
• MOSFET Power Supply, Variable Hi-Pass : 40 Hz-250 Hz
• Variable Low-Pass : 40 Hz-250 Hz, Variable Input Level (Gain) Control : 6V-200mV
• Variable Bass Boost : 0-18dB, Variable Subsonic Filter : 10Hz~100Hz, 24dB/Octave
• Sub Sonic Switch, Thermal / Overload / Short Circuit Protection, Power & Protection LED Indicator, Low Level RCA Input : 10K Ohms
• Line Level RCA Output, Frequency Response : 15 Hz-30K Hz
• Signal to Noise Ratio: >95dB, THD:0.1 %
• 2x60 Amp Maxi Type Fuse, Slim Size Amplifier Design For Easy Installation

Product description

Lanzar Model : HTG668BT.5

4000 Watt 6 Channel Mosfet Amplifier with Wireless Bluetooth Audio Interface

• 6 X 250W RMS @ 4 Ohms
• 6 X 350W RMS @ 2 Ohms
• 3 X 1,000W MAX @ 4 Ohms Bridged
• 6 X 500W MAX @ 4 Ohms
• Wireless Bluetooth Audio Interface
• Bass Boost Circuit
• Bridgeable at 4 Ohms
• 2 Ohm Stereo Stable
• Chrome RCA Inputs
• Stereo Line Outputs for Left and Right Channel
• Low Pass Filter Controls
• LPF Freq. Response: 40Hz-250Hz
• High Pass Filter Controls
• HPF Freq. Response: 40Hz-250Hz
• Band Pass Filter Controls
• BPF Freq. Response: 40Hz-3KHz
• Power and Protection LED Indicators
• Soft Turn-on/Turn-off
• THD: <0.01%
• S/N Ratio: >90dB
• Channel Separation: >65dB
• Freq. Response: 10Hz-45KHz
• Fuse: 25A X 3
• Dimensions: 19.29''(L) X 2.24''(H) X 8.81''(W)

Upgrade your audio system with Lanzar's next generation power handling and distribution amplifier technology. New for 2014, Lanzar introduces the innovative Heritage Series Bluetooth Amps that combine high-performance audio processing power with Bluetooth wireless streaming capability! With built-in Bluetooth, you'll be able to wirelessly stream audio from virtually any Bluetooth device -- quick and easy. Instantly stream your favorite tracks from your smartphone or tablet; you can also stream your favorite internet radio providers like Pandora, Spotify, iHeart, etc. Engineered to perform and packed with versatile sound specialization, the Heritage Series Amps also feature MOSFET efficient power processing, bass boost circuitry, 2 Ohm stereo stability, bridge-ability and plenty more features to amplify and satisfy. Join the trend of Bluetooth and sound amplifying power with Lanzar Heritage (HTG) amps.

• AUDIO EVOLUTION: This car speakers amp features regulated MOSFET Pulse Width Modulated that maintain rated power over a wide range of battery voltage. Excellent frequency response rates place these amps in a class of their own.
• RCA JACKS: The Line-Out jacks allow you to build multiple amplifier systems without having to use splitter cords to distribute the signal. This makes it easier to bring one set into the first amp, then use the line out jack as the feed to the next amp.
• SOUND SPECIALIZATION: This high-powered Power Amplifier is cutting edge technology at its finest. Chrome RCA connectors and speaker screw-down terminals ensure a secure connection between amplifier and speakers that allow distortion-free sound.
• BLUETOOTH: With built-in Bluetooth, you'll be able to wirelessly stream audio from virtually any Bluetooth device. Instantly stream your favorite tracks from your smartphone or tablet, or favorite internet radio providers like Pandora, Spotify, iHeart.
• INTELLIGENT DESIGN: The car audio amplifier 6 channel safety features include power and protection LED indicators; soft turn-on/off; and thermal, overload, and speaker-short protection.

User questions & answers

Question:	Hi, what class of amplifier is this
Answer:	It looks like High Qulaity Class D at
Question:	Can this amplifier works with a 4 speaker only
Answer:	Hi, yes you can connect 4 speakers (up to 4000 watts) to this unit. You may check other details of the unit by visiting our website pyleaudio.com. Type the model number on the search box HTG668BT for more details. Thank you.
Question:	Would this push a 3200w 18inch sub
Answer:	yes because channels 1 through 4 are stereo and 5 and 6 is mono block
Question:	Is this CEA 2006 certified
Answer:	Hi, we have our own in house safety testing laboratories, and we make sure that all the power supplies and internal components that we use in our products meet the strictest safety certifications and standards. All our products must pass the North American standard in safety testing before being approved by our Research and Development team for sales to the public. We only hire third-party testing agencies when necessary so that we can guarantee the lowest prices and the safest products.

Product description

Upgrade your audio system with Lanzar's next-generation power handling and distribution amplifier technology. New for 2014, Lanzar introduces the innovative Heritage Series Bluetooth Amps that combine high-performance audio processing power with Bluetooth wireless streaming capability!. Engineered to perform and packed with versatile sound specialization, the Heritage Series Amps also feature MOSFET efficient power processing, bass boost circuitry, 2 Ohm stereo stability, bridge-ability and plenty more features to amplify and satisfy. Join the trend of Bluetooth and sound amplifying power with Lanzar Heritage (HTG) amps.

Features:

• 4 X 250W + 1 X 650W RMS @ 4 Ohms
• 4 X 350W + 1 X 1,500W RMS @ 2 Ohms
• 2 X 1,000W MAX @ 4 Ohms Bridged
• 4 X 500W + 1 X 2,000W MAX @ 4 Ohms
• Wireless Bluetooth Audio Interface
• Bass Boost Circuit
• Bridgeable at 4 Ohms
• 2 Ohm Stereo Stable
• Chrome RCA inputs
• Stereo Line Outputs for Left and Right Channel
• Low Pass Filter Controls
• LPF Freq. Response: 40Hz-250Hz
• High Pass Filter Controls
• HPF Freq. Response: 40Hz-250Hz
• Band Pass Filter Controls
• BPF Freq. Response: 40Hz-3KHz
• Power and Protection LED Indicators
• Soft Turn-on/Turn-off
• THD: <0.01%
• S/N Ratio: >90dB
• Channel Separation: >65dB
• Freq. Response: 10Hz-45KHz
• Fuse: 30A X 3
• Dimensions: 19.29''(L) X 2.24''(H) X 8.81''(W)
• Sold as : 1

• AUDIO EVOLUTION: This car speakers amp features regulated MOSFET Pulse Width Modulated that maintain rated power over a wide range of battery voltage. Excellent frequency response rates place these amps in a class of their own.
• SOUND SPECIALIZATION: This high-powered Power Amplifier is cutting edge technology at its finest. Chrome RCA connectors and speaker screw-down terminals ensure a secure connection between amplifier and speakers that allow distortion-free sound.
• INTELLIGENT DESIGN: The car audio amplifier 5 channel safety features include power and protection LED indicators; soft turn-on/off; and thermal, overload, and speaker-short protection.
• RCA JACKS: The Line-Out jacks allow you to build multiple amplifier systems without having to use splitter cords to distribute the signal. This makes it easier to bring one set into the first amp, then use the line out jack as the feed to the next amp.
• BLUETOOTH: With built-in Bluetooth, you'll be able to wirelessly stream audio from virtually any Bluetooth device. Instantly stream your favorite tracks from your smartphone or tablet, or favorite internet radio providers like Pandora, Spotify, iHeart.

User questions & answers

Question:	Can I run a chuchero and a subwoofer
Answer:	BT1.2 if I remember... NFI about AptX. In any event, it's really a crap item. Some Chinese company bought the Lanzar name; it's not the quality it was. At all.
Question:	Can I run 2 midrange speakers and a subwoofer
Answer:	Hi, it is a class D amplifier. Thank you.
Question:	Bluetooth version? AptX features
Answer:	yes. it comes with an external microphone.
Question:	Is it monoblock? Class d? Class a? class a/b? Class b
Answer:	please select shipping from JOINLGO not amazon, then we will send the kit to you from China via DHL fast shipping. please leave order message "needs 9" screen", then we will send the kit with a 9" monitor. thanks,

Product description

Lanzar Model : VCT2210 2000 Watt 2 Channel High Power MOSFET Amplifier 1000W x 2 Output @ 2 Ohms 2000W x 1 Bridged Output @ 4 Ohms 2 Ohm Stable MOSFET Power Supply High/Low/Full Crossover Switch Variable Hi-Pass : 40 Hz-250 Hz Variable Low-Pass:40 Hz-250 Hz Variable Input Level (Gain) Control : 6V-200mV Bass Boost Selector : 0/+18dB Thermal / Overload / Short Circuit Protection Soft Turn On/Off Power & Protection LED Indicator Low Level RCA Input : 10K Ohms Line Level RCA Output Frequency Response : 15 Hz-30K Hz Signal to Noise Ratio: >95dB THD:0.1 % 2x40 Amp Maxi Type Fuse Slim Size Amplifier Design For Easy Installation Dimensions: 10.63''W x1.75''H x 12''L The Lanzar 2000 WATTS 2 Channel MOSFET Amplifier by Lanzar is a quality product designed and engineered to give you many years of uncompromised musical service. VECTOR series amplifiers are designed with the latest technology available, which provides headroom for even the most demanding peaks and dynamic ranges found on modern CDs and recordings.

• 1000W RMS / 2000W MAX POWER: The Lanzar 2000 watt 2 channel high power MOSFET amplifier is perfect for your car stereo entertainment system. It can give 1000W x 2 output at 2 ohms or 2000W x 1 bridged output at 4 ohms for a high quality audio.
• FULL RANGE CROSSOVERS: This product features a low / high pass variable crossover for versatility and precise control by being able to fine tune your music. The speaker / subwoofer terminals are to guarantee high conductivity and minimum signal loss.
• MOSFET POWER SUPPLY: This powerful amplifier is equipped with metal oxide semiconductor field-effect transistors to quickly switch from full to non-conduction for high efficiency output.
• SHORT CIRCUIT PROTECTION: This 2 ch amp is also equipped with a 2x40 amp maxi type fuse to protect the amplifier and the electrical system of your car from thermal / overload / short circuit conditions.
• SLIM SIZE DESIGN: Measuring only 10.63''W x1.75''H x 12''L, this amplifier has a slim size design and comes complete with all required mounting hardware for easy installation.

User questions & answers

Question:	I'm hooking up a second amp does this amp have RCA out so i can run the rca into the the other amp
Answer:	This bag was designed for men, but we invite anybody to enjoy its style.
Question:	How would this be on a power acoustik 12, dual 2 ohm 3500 watt peak 1750 rms
Answer:	The Buckner Top Zip Workbag weighs around 1.26 kg.
Question:	Hi,will this push my 15in skar zvx in a custom 32 htz box
Answer:	I'm not sure. The material seems water resistant but I can t say for sure. I feel confident that if you spill a liquid it wont go thru but cant say what will happen if you leave it out in the rain.
Question:	Is this really a 2 channel amp the photo shows it as a 4 channel
Answer:	My laptop is 16 3/8" x 11" x 1 1/4" and doesn't leave much room to spare. Not 100% sure with that extra 3/4" you have that the bag will close properly...but it will be close.