11 best 12v power supply

Product description

12V 2A Switching Power Supply Adapter 2 Pack,

5.5x2.1mm DC Power US Wall Plug

Input Voltage: 100-240V AC

Output Voltage: 12V DC 2000 mA

Idea for CCTV Camera, Audio Amplifier, HUB, Router and Low Voltage Single Color 3528/5050 LED Strip Lights

Please note that maximum total watt of this adapter should not exceed 48 watts



How to find the correct power adapter for your electrical device

The only thing you need to know is the device’s Voltage / Volts (V) and Amperage / Amps (A), this adapter is 12 Volt / 2 Amp. Make sure your device's power supply is DC 12V 2A too

• 12V 2A Switching Power Supply Adapter 2 Pack
• Input Voltage: 100-240V AC; Output Voltage: 12V DC 2000 mA
• Plug Type : 5.5x2.1mm DC Power US Wall Plug
• Idea for CCTV Camera, Audio Amplifier, HUB, Router and Low Voltage Single Color 3528/5050 LED Strip Lights
• 3 Foot Long Cable and 2 Years Warranty

User questions & answers

Question:	What are the green connector things called
Answer:	As the Amazon ad states it is 3 feet long.
Question:	Is there a delay once this is powered on? Previous question has both Yes and No answers
Answer:	no, only one end with plug needs a power source
Question:	Do they get very hot say burn to a fast touch
Answer:	No, it is just a few cases. It looks decorative and light color is also yellow during the day
Question:	How long is the cable
Answer:	I was able to dim these just fine. Make sure you have a dimmer for LED. I purchased “Lutron Credenza C.L Plug-In Lamp Dimmer for dimmable LED, Halogen and Incandescent Bulbs, TTCL-100H-WH, White” off of amazon and it works just fine with these lights.

• LED power supply widely used for LED strip lights, and any 12V DC led lights
• New upgraded Low fever & No Noise | Full Wattage 60 W | Long Lifespan
• Easy installation, save time and more securer cable connection(4.92ft)
• Full protection of over Voltage, over Current, short Circuits and over temperature
• 5 year warranty. High quality commercial grade AC to DC power supply adapter

User questions & answers

Question:	Will this work for a cpap machine
Answer:	Japan
Question:	can this adapter be used to charge a handheld Stanley Fatmax spotlight
Answer:	Yes it does. If you need a coupon for additional savings, please text us at 609.491.2844
Question:	Is it 5 amp or 3 amp? title and description says 5amp; about this item says 3amp? which is true
Answer:	not sure....if u mean does it come off that clip, yes
Question:	How long is the cord
Answer:	The mic does not have power built in. The AT8531 power module is included. There are several versions of this mic - if you need it without a power supply to work with an XLR input, select this one: https://www.amazon.com/dp/B00ZCOPH1Q and if you want one that plugs into a minijack, then you would want this one: https://www.amazon.com/dp/B01M8FXWVD

Product features

Stable Output

Built-in advanced synchronous rectifier smart chip and EMI filter, convert fluctuating voltage to stable voltage, effectively reduce electromagnetic interference, ensure stable voltage output.

High-Quality Cable

Thickened copper wire can bear more voltage and current. It prevents wires from over hot and causing fires.

Superior Safety

Flame-retardant exterior shell and built-in safeguards to protect against overheat, overload, over-charging, short-circuit provide ultimate protection for you and your devices.

Flexible & Durable

• With new flame retardant / anti riot sun / antioxidant / anti-aging PVC plastic which is flexible and durable.
• Heavy-duty quality with 43 x 0.14mm pure copper strands inside one cable brings the reliable, secure connection and rapid transmission. 18AWG DC Power Pigtail Cable provides a more safer DIY solution for DC power connectivity, work with a power adapter or a power supply box.

High Rating

• Current Overload Cut-off | Automatic Thermal | Short Circuit Protection | High Efficiency | 40 x 0.15mm 100% Copper Power Cord with USA 2-prong Plug | Easy Install | 12 V Constant Voltage | Low fever & No Noise | Full Wattage 60 W | Long Lifespan | High Quality Shockproof Retail Packing Box | Secure Black Plastic Case with LED

Safety Certification

• Low Quality Switching Power Supply Charger Easily Cause Fire or Other Disaster, We Suggest to use LEDMO Secure AC-DC Adaptors

Product description

Features:

* Power 30 Watt, Input Voltage 110 -260 Volt

* Output Voltage 12V DC

* Width 41 mm or 1-5/8"

* Length 200 mm or 8"/ Height 26 mm or 1

Specifications:

* Wattage: 30W

* Short-circuit protection: automatic recovery

* Over-load operating range: 33W

* Over-pressure protection range: 130V

* Over-heat protection range: 85℃

* Product Dimensions: 9.1 x 2.7 x 1.7 inches

* Material: Aluminum,Crome

* Thickness: 1.70 inches

* Power Source: corded-electric

* Temperature Range: -20 - 50℃

* Plug Format: 3-prong Plug

* Waterproof grade: IP67

Package Including

1 X Power Supply

• 【30W 12V 2.5A Converter】Convert 110V AC to 12V DC power supply low voltage transformer driver with 3-prong plug, safe to use.
• 【Safe Power Adapter】Automatic protection design such as:short circuit, overload, over voltage, over current, low temperature.
• 【IP67 Waterproof】Durable Aluminum Alloy metal housing and filled fully with silica gel never trigger the Tire. 100% IP67 Waterproof rate for outdoor use.
• 【Widely Used】Wide input voltage range, steady and precise output voltage. Great power transformer for electronic equipment, Led Lighting, home appliance and more.
• 【High Quality】Pass CE,ROHS test. strict quality checking and long working life. We offer 1 year replacement assurance.

User questions & answers

Question:	how long is the cord
Answer:	It is 5
Question:	How many 5m led strips can this unit power
Answer:	55.7 inches

• ✔【INPUT&OUTPUT】: 100-240V AC input 50/60HZ, DC 12V 2Amp output, 24 Watt max wattage
• ✔【WIDE APPLICATION】: Convert 100-240V AC to 12V DC, widely use for SMD2835 3528 5050 RGB LED strip lights, LED string, wireless routers, ADSL Cats, HUB, switch, security camera, Audio/Video power supply
• ✔【KINDLY NOTE】: Please be kindly informed that the total wattage of LED strip lights should not exceed the max wattage（24 Watt) of this adapter
• ✔【PACKAGE INCLUDES】: 1 x 12V 2A 24W power supply with 3.3ft power cord, 1 x 5.5/2.1 DC female barrel connector to screw adapter
• ✔【HIGH QUALITY】: With 1 year warranty, and our seller support team always stand behind our products in any way, so please contact us for solution if you have any quality problems

User questions & answers

Question:	Can this be used for lighting a dollhouse
Answer:	Here is the manual online. I had lost mine too. https://www.manualslib.com/manual/947339/Sylvania-Sp230.html
Question:	I have a 12 volt 10 watt water fountain pump, that will run approx. 12 hours daily. Will this transformer be adequate
Answer:	I bought it for use with a Sylvania under-the cabinet kitchen radio. Could never get it to work. Got NO help from either Sylvania or Amazon; couldn't even figure out how/where/to whom to return it. Total lemon. Gave it Goodwill. I hope someone at Sylvania or Amazon reads this...
Question:	I purchased the unit to power a 16' 12v 24w led strip, but the adapter is running at 170f. is this normal/safe
Answer:	Sylvania portable Bluetooth speaker has 6 watts.
Question:	Can it work for cctv Cameras
Answer:	Yes it will, I have a service truck and do all my work outside in Ohio and mine gets down into the coldest temps and it works great

Product features

Product Specifications:

• DC Jack Type: 5.5 * 2.1mm male
• Plug Type: US two prong
• Input Voltage:AC 100-240V
• Input Frequency Range: 50/60Hz
• Output Voltage: DC 12V
• Output Current: 2Amp
• Output Voltage: 24Watt
• Wire Length: 20 Awg, 100cm long at outlet end.

Kindly Note:

• This item is power adapter (transformer) of DC 12V Low Voltage, use for LED Strip Light, CCTV Camera and so on.
• Please be kindly informed that the total wattage of LED strip lights or other items should not exceed the max wattage (24W) of this adapter.
• And we suggest it to be de-rated 10%-20% when using to prevent overheating.

Warnings:

• Don't open or modify the led power supply
• Please leave children, kids far away from high voltage power source
• Please use it under professional electrician's guides

Product description

12V 2A 24W AC/DC Car Power Converter, transform 110-240V AC from Wall Plug into 12V DC for Car charger or Car lighter Plug in, bring your car appliances back home to use conveniently, which means you can save many money.

Best solution for low power power with international safety certification.



Tips:

Works perfectly with any vehicle electronic products with rated power less than 2A 24W, No More Than 24W, 2A! ! !



The Consequences of Using Products with an Electricity Exceeding 2A:

1.Our product is a low-power converter. If a product exceeding 2A is connected, the electricity will be too large, which will cause the circuit to burn out.

2. The total power of the connected appliances exceeds the rated power. If the actual power is greater than the rated power, the appliance may be damaged.



NOTE!!!!

1. Bundling the wires during use may cause abnormal overheating and easily lead to safety accidents.

2. Blocking the heat emission hole during use, the blockage of the heat emission hole causes the product to fail to dissipate heat normally, and excessive temperature may also cause problems.



WORKS WELL WITH CAR ELECTRIC DEVICE UNDER 24W

Car Dash Cam

Car Charger

Car MP3 player

Car Bluetooth FM Radio Adapter

Car Air Purifier

Car Humidifier & Car Diffuser

Car Telephone

Automotive Razor



Specifications:

Input voltage: 100-240V

Frequency: 50 / 60HZ

Output voltage: 12V

Output current: 2A

Output ripple: 100mVp-p

Work efficiency: 83%

Operating temperature: 0 ℃- 50 ℃

Storage temperature: -20 ℃- 85 ℃

Output line length: 1.2 meters

Output connector: cigarette lighter, car head



Package include:

1 x Car Converter Adapter

• AC/DC Power Socket adapter transform 110-240V AC from Wall Plug into 12V DC, works perfectly with any vehicle electronic products with rated power less than 24W, the maximum current is 3.8A
• With ABS shell manufacturing, includes safeguard features against incorrect voltage, short circuit, internal overheating, safe to use
• 1.2M extended total cord convenience to use, just insert it into any power outlet at home, you can use any electronic equipment that has cigarette lighter plug
• Input voltage: 100-240V; Output voltage: 12V, Output current: 2A; Frequency: 50 / 60HZ; Wattage: 24W, for Car charger or Car lighter Plug in, bring your car appliances back home
• Work perfectly with ANY car powered devices under 24W, like Car Diffuser, RV refrigerator, Car TV, Vacuum cleaner, Power amplifier portable Cooler/Warmers, Air compressor, Electric Seat Warmer, Vacuum cleaner and other DC appliances

User questions & answers

Question:	I bought a 12v air pump for car/bike. but i want to use 110v to use it at home. can i buy this to use the 12v air pump
Answer:	My experience says No. I purchased this item to use on my 6 volt air compress which has a plug in end for my car. I thought I could use the air compressor for my kids pool toys but I had to convert it to plug in some how. I bought this item and it barely powers the Compressor and doesn't even put out any air at all. Just to confirm it was the plug we plugged into car first then this adapter plug. It doesn't have enough power to completely power my 6v Compressor at all. I went to home depot and purchased a Husky 120 volt inflator for 20.00 which has a plug end.
Question:	Anyone use it to power their laptop? My laptop came with a car charger so i was wondering for travel in case i needed an outlet
Answer:	I’ve tried to power a portable air pump and it DID NOT provide enough power, it would be a trickle charger for a laptop meaning that the power would discharge slower but it’s not enough to maintain or charge the laptop if in use.
Question:	Can i use this to plug 12 vdc charging adapter to charge mobile power 400 6 in 1 power supply
Answer:	I do not know what a "mobile power 400 6 in 1 power supply" is, but this AC to DC Converter could not handle a simple portable automobile tire inflator. The power was insufficient to inflate my tires, so I had to go back to plugging the inflator into the car's cigarette lighter socket. So expect the unit to deliver significantly less AC than DC voltage.
Question:	Will this work to inflate tires
Answer:	The output current of this power adapter is 2A. please check the output current of your products before you buy the ac to DC converter. many of the buyers bought the wrong item and said our converter couldn't work. please check your items that you use before buying the converter. thanks

Product description

Ul approved switching power supply. Input voltage: 100-120V input voltage range: 100V-120V input voltage frequency: 50Hz, 60Hz Output voltage: 12Volts output voltage range: minimum 11.4V, maximum 12.6V Output current: 1Amp cord length: 56inches connector: 5.5mm outside diameter, 2.1mm inside diameter, 10mm long, center positive. Minimum efficiency: 77.75% @ 115VAC Input and output at full load. Over-current/short output protection: the power supply will withstand a continuous output short. Normal operation will resume when the short is removed. Lead free & RoHS Compliant note: standard power supply tip sizes are (OD - outside Diameter, id - inside diameter): 5.5mm OD/2.5mm ID, 5.5mm OD/2.1mm ID this power supply comes with a 5.5mm OD/ 2.1mm ID tip. Trademark: R-Tech registration# 4777168 dve UL listed E135856

• Input: 100-240V ~ 50/60Hz 0.5A; output: 12V 1A (1000MA)
• Output voltage range: 11.4V Min./ 12.6V max.
• Cord length: 56in./ connector size: 5.5mm x 2.1mm (10mm long)
• Minimum efficiency: 77.75-Percent at 115 VAC input and full output load
• Trademark: R-Tech registration# 4777168 dve UL listed E135856

User questions & answers

Question:	Could you confirm the input voltage range
Answer:	Only under load. I pull 40-50W and the fan runs on and off non-stop..
Question:	is the center positive and outside negative or the opposite
Answer:	to the left of the terminal strip is a variable resistor for adjusting voltage, I have 2 of these units, each goes from around 10.5v up to 14.8v per my DMM.
Question:	I would like to order 100 of these do you have a listing for such
Answer:	CE (China Export)
Question:	Is this suitable for powering an LED light strip
Answer:	Those lugs are where you insert your 110/120v power. The N is for the neutral side or the white wire, and the L is for the load side, the black wire. If you are using a grounded wire power connection, which in my opinion you should use, the ground would go on the lug just to the left of the N connection, between the -V and the N. I am not an electrician, so if you have further questions, it is recommended that you seek an answer from a licensed electrician.
Question:	Does the fan run constantly, or only under load
Answer:	It is about 1 meter.
Question:	How do i adjust voltage to 13.8V DC? I see a small variable resister to the left of the V+ terminals
Answer:	Only one.
Question:	Is this supply UL or RU listed
Answer:	Please confirm whether the power of your cpap machine exceeds 60W. This Power Adapter supplies 12V 5A (60W) max.
Question:	what does the N & L stand for above the 120v input
Answer:	Thank you for your question. Before you buy this product, please confirm the power of your product

Product features

Efficient

Featuring high-quality components and a UL rating, the adapter as able to provide up to 77.75% efficiency at full load with 115VAC input.

Standard Plug Size

The standard plug tip (2.1mm inside diameter, 5.5mm outside diameter) allows for comprehensive compatibility with DC12V devices.

5-Pack

A 5-pack of adapters means you'll be able to power a multitude of DC12V devices, and not worry about overpaying for individual adapters.

Lifetime tech support

Our technicians are ready to help by phone 9:00AM to 5:00PM Central Standard Time (Monday through Friday), and via Amazon message during after-hours and weekends.

Manufacture based standard warranty

In addition to the 30-days no-questions-asked refund policy, we also offer a US-based standard warranty that covers replacement.

• ▲HIGHER PRECISION WITH DATA HOLD FUNCTION - It is more precise to switch between coarse and fine tuning only by pressing one adjusting knob lightly from 0 to 30V, 0 to 5A. To press two knots 3 seconds simultaneously for holding a set of values and then press 3 seconds to release
• ▲4 DIGITS READINGS WITH BACK-LIT LED DISPLAY - With a 0.01V and 0.001A resolution, 4 digits provide more accurate and clearer visible readout for the voltage and current value only via two knobs, extremely durable and easily visible even in low-light usage, meeting the needs of most people, ideal for small labs or the hobbyist at home
• ▲HIGH-QUALITY WITH ESSENTIAL SAFETY - Grounding wire, thermal protection, voltage overload and short-circuit protection ensure the safety; The built-in fan reduce the operation noise, prolonging the life of product effectively
• ▲CONSTANT VOLTAGE & CURRENT OPERATION MODE - Easy to dial in the desired voltage with the encoded-controlled fine and coarse adjustment knob, can easily see the amperage and voltage change as circuit components are switched in and out
• ▲WHAT YOU GET - 1 x MDC01 Power supply host , 1 x Output power cord , 1x Input power cord, 1 x User manual ,(If you received items with signs of damage or wear during the shipping, please feel free to contact us and we promise help you solve the problem or resend.)

User questions & answers

Question:	Is there any manufacturer warranty for this product
Answer:	Yes, It can. I use it to charge my e-bike's 10s5p battery pack (that is 10 in series, and 5 in parallel (50 batteries)). It works wonderfully.
Question:	Hi I cannot see the switch for 200v at the back. Are you sure it exists
Answer:	There's a switch in the back of theunit marked 110v /220v , slide the switchto the right for 110v and to the left for220v, you can use your finger nail to do it.Hope this helps.
Question:	Does it work with 230V In the description it says yes, but in some questions it says no
Answer:	The unit I received is 11" x 5" x 6" without the power cord installed.
Question:	Dimensions given dont seem to match pictures of the case. Actual height
Answer:	For copper plating the formula is ~0.07-0.2A per 1 square inch of the surface, though in most cases you'd use about 0.1A per sq inch. That means with the supply that provides up to 5A you'd be able to work with up to 50 square inches of the surface. I imagine a coyote skull must be more than that even if you only plate the outer surface of it. I'd say 5A should be enough to plate a skull of cat (outer and inner sides) without having to struggle with the base layer (that's done at higher current settings) not being tough enough. For a skull size of coyote's you'd probably need a 10A power supply. Hope that would help others who might have similar question

Product features

Light Weight and Portable

• Compared with other linear DC Power Supply, Tacklife MDC01 DC Power Supply is more compact, lighter, portable and easy to carry.
• Specifications: Input voltage: 110V/60Hz (setting switch at the back) Output voltage: 0-30V Output current: 0-5A Relative humidity: <80% Relative humidity: <70%
• Constant voltage state:Voltage stability: <0.01%+3mV Load stability :< 0.01%+5mV Ripple & noise : <1.0mVrms Temperature coefficient: < 300PPM/0C
• Constant current state: Current stability: < 0.2%+3mA Load stability :< 0.2%+3mA Ripple & noise :< 3mArms

4 Digits Display, High Precision

• The easy to read 4 digit LED is used to display the voltage and current values, displaying more accurate value than other DC Power Supply, and are extremely durable and easily visible even in low-light usage.

• With the encoded-controlled fine and coarse adjustment button, the single multi-turn pot is far more convenient than the more typical course/fine adjustment knobs, you can tweak the settings easily for fine control as needed.

Multiple Protection

• Well-made with all the essential safety features.
• The built-in fun protect the main body from high temperature, when the temperature reaches 60 degree, the over temperature protection starts to control the temperature, effectively prolong the life of product.
• The grounding wire ensure the safe operation.
• The encoded-controlled fine and coarse adjustment button make the adjustment more easier and convenient.
• Note:
• Do not operate in humid environment.
• Do not operate in flammable and explosive environment.
• Keep the product surface clean and dry.

• Input: 100V-240V 50/60Hz; Output: DC 12V 5A max; Output adaptor jack size: 5.5mm x 2.1mm
• Safety features: Automatic overload cut-off, over Voltage cut-off, automatic thermal cut-off, short circuit protection.
• Voltage consistency: There is no voltage fluctuations at power on, during transmit, receive, or at power off. It will protect your electronic products from destruction.
• It comes with a free female DC connector. So you can easily connect wires on it without soldering.
• Great for LED Strips, 3D Printer, ham radio transceiver, CCTV cameras，car subwoofer amp, audio amplifier, wireless router, ADSL Cats, HUB, audio/ video power supply. Indoor use only!

Product features

Product Specification:

• Input: AC 100V~240V 50/60Hz
• Output Voltage: DC 12V ( constant voltage )
• Output Current: Max 5A
• Output Wattage:Max 60W
• DC connector: 5.5mm x 2.1 mm (inside"+", outside"-")
• Safety Compliance: FCC / CE/ RoHS / CCC
• Package List: 1x 12V 5A power supply adapter ; 1x AC input power cable; 1x DC female connector

Superior Safety

Flame-retardant exterior shell and built-in safeguards to protect against overheat, overload, over-charging, short-circuit provide ultimate protection for you and your devices.

Stable Output

Built-in advanced synchronous rectifier smart chip and EMI filter, convert fluctuating voltage to stable voltage, effectively reduce electromagnetic interference, ensure stable voltage output.

High-quality Cable

3x 0.75 mm²(18AWG) copper conductors, individual wire insulation and flexible flame -retardant PVC jacket provide you a safe and reliable cable with better conductivity.

Durable Design

Robust casing protects against scratches,bumps, drops, withstands pressure and keeps internal components safe during emergencies enhanced longevity.

Broad Compatibility

Max 5A ouput means it can supply with amperage less than 5A. ---such as 1A, 3A,5A. If your device draws 4A, 4A will be supplied. But if draws more than 5A, only 5A will be supplied.

Expanded Application

We especially add a female terminal connector in the package. You can screw wires onto it to power the devices that have no female DC socket. This will greatly expand its applied range.

Professional Advice

The max use should be no more than 80% of the full loads. Otherwise, power supply's service life will be shortened. We recommend to use 60W PS to power devices less than 48W.

Product description

The Thermaltake Toughpower Series is a premium line of PSUs certified to the 80 PLUS Gold standard Incorporating components of the high quality it delivers stable performance and Gold rated efficiency TPD 1500W Gold which uses a semi-modular design ultra-quiet fan strong single 12V rail with all flat all black cable routing for a professional look to support your system today and tomorrow.





P/N: PS-TPD-1500MPCGUS-1

WATTS: 1500W

RGB FAN: No

FORM FACTOR: ATX

MODEL: TP-1500AH5CEG

TYPE: Intel ATX 12V V2.3 & EPS 12V standards

MAX. OUTPUT CAPACITY: 1500W

PEAK OUTPUT CAPACITY: 1550W

COLOR: Black

PFC (POWER FACTOR CORRECTION): Active PFC

POWER GOOD SIGNAL: 100-500 msec

HOLD UP TIME: 17msec (minimum) @ 75% of maximum load at 100V - 240V AC input.

INPUT CURRENT: 18A - 9A

INPUT FREQUENCY RANGE: 60 Hz - 50 Hz

INPUT VOLTAGE: 100 Vac- 240 Vac

OPERATING TEMPERATURE: 0℃ to +40℃

OPERATING HUMIDITY: 10% to 90%,non-condensing

STORAGE TEMPERATURE: -10 ℃ to +50 ℃

STORAGE HUMIDITY: 5% to 95%, non-condensing

COOLING SYSTEM: 135mm double ball-bearing fan, 1700±10%R.P.M.

EFFICIENCY: 87-92% efficiency @ 20-100% load

MTBF: 120,000 hrs minimum

SAFETY APPROVAL: UL/ CB+Baurt mark/ CE/ FCC/ CCC/ GOST certification

PCI-E 6+2PIN: PCI-E 6+2pin x 10

• 80 PLUS GOLD Certified
• High Quality Japanese Capacitors
• Continuous Power Design
• Cooling System : ultra quiet 135mm double ball-bearing fan, 1700±10%R.P.M.
• 5 Year Warranty

Product features

Thermaltake Toughpower Power Supply

The Thermaltake Toughpower Series is a premium line of PSUs certified to the 80 PLUS Gold standard. Incorporating components of the highest quality, it delivers stable performance and unbeatable efficiency with semi-modular design. An ultra-quiet fan delivers silent cooling and a dual strong 12V rail flexibly routes the maximum available power to the CPU, enabling peak performance of the computer system.

Ultra Quiet Fan

The Toughpower adopts a 135mm (850W, 1000W, 1200W, 1500W) / 140mm (750W) cooling fan with intelligent RPM control. This guarantees superior cooling performance and silent operation.

80 PLUS Gold Certified and Kaby Lake-Ready

The Toughpower Gold Series saves energy through its high energy efficiency up to 90% and is certified to 80 PLUS Gold. In addition, the Toughpower Gold Series is designed to meet the demands of Intel’s new, Seventh-generation Kaby Lake processor.

High Quality Japanese Capacitor

High-quality Japanese capacitor produces supreme performance with low impedance characteristics. This delivers stable operation over extended periods of time, as well as excellent reliability.

Massive and Dedicated +12V Output

Equipped with powerful dual +12V rail.

• Input: 100V-240V 50/60Hz; Output: DC 12V 10A 120W max; Output adaptor jack size: 5.5mm x 2.5mm, compatible with 5.5mm x 2.1mm.
• Safety features: Automatic overload cut-off, over Voltage cut-off, automatic thermal cut-off, short circuit protection.
• Voltage consistency: There is no voltage fluctuations at power on, during transmit, receive, or at power off. It will protect your electronic products from destruction.
• Works with all devices that draw less than 10A, such as 1A, 2A, 3A,4A, 5A, 6A, 7A, 7.5A, 8A, 9A,10A,etc. We recommend to use 80% (8A) of the full load.
• Great for LED Strips, 3D Printer, ham radio transceiver, CCTV cameras, car subwoofer amp, audio amplifier, wireless router, ADSL Cats, HUB, audio/ video power supply. Indoor use only!

User questions & answers

Question:	Does the 10a version come with a terminal adapter to screw wires into
Answer:	Hello, This power supply can output 120W maximum @ 12V. If all of the 8 cameras are 12V and the total power is less than 120W. Then yes. We have biger 12V 15A 20A and 30A power supply module brick. Please check. https://www.amazon.com/dp/B078RTV41D?ref=myi_title_dp https://www.amazon.com/dp/B06XJVYDDW?ref=myi_title_dp
Question:	Description says 100-240 vac input. can i use an adapter (not transformer) to plug it into 220vac
Answer:	Just aware this Ac to DC adapter has 24V/1A DC output on 5.5x2.1 mm male plug, it needs a match female connector with options of how to mount it and the wiring, these are available at Amazon but be sure to get the right one.
Question:	My led lights needs 21.6 amps, to power up 108watts, is this enough
Answer:	I didn't measure the on load power dissipation but since it is only a 24watt supply it would have to be very small. I wouldn't worry about it. The output was very close to 24V.
Question:	Can this give power to 8 security cameras
Answer:	Plug about 3.5" lengh and it's widther then normal plug, hard to use in tight outlets.

Product features

Product Specification:

• Input: AC 100V~240V 50/60Hz
• Output Voltage: DC 12V ( constant voltage )
• Output Current: Max 10A
• Output Wattage:Max 120W
• DC connector: 5.5mm x 2.5mm, compatible with 5.5mm x 2.1mm (inside"+", outside"-")
• Safety Compliance: FCC / CE/ RoHS / CCC
• Package List: 1x 12V 10A power supply adapter ; 1x AC input power cable; 1x DC female connector

Superior Safety

Flame-retardant exterior shell and built-in safeguards to protect against overheat, overload, over-charging, short-circuit provide ultimate protection for you and your devices.

Stable Output

Built-in advanced synchronous rectifier smart chip and EMI filter, convert fluctuating voltage to stable voltage, effectively reduce electromagnetic interference, ensure stable voltage output.

High-quality Cable

3x 0.75 mm²(18AWG) copper conductors, individual wire insulation and flexible flame -retardant PVC jacket provide you a safe and reliable cable with better conductivity.

Durable Design

Robust casing protects against scratches,bumps, drops, withstands pressure and keeps internal components safe during emergencies enhanced longevity.

Broad Compatibility

Max 10A ouput means it can supply with amperage less than 10A. ---such as 2A, 5A,10A. If your device draws 8A,8A will be supplied. But if draws more than 10A, only 10A will be supplied.

Expanded Application

We especially add a female terminal connector in the package. You can screw wires onto it to power the devices that have no female DC socket. This will greatly expand its applied range.

Professional Advice

The max use should be no more than 80% of the full loads. Otherwise, power supply's service life will be shortened. We recommend to use 120W PS to power devices less than 96W.

Product description

Features: - Linear/ regulated power supply design - AC-to-DC Power conversion (12V DC) - provides constant source of DC voltage - simple electronic plug-in operation - hassle-free screw terminal connectors - eliminates the need of battery or external power source - fuse protected with auto-reset - electronic overload & short circuit protection - used for component & device equipment testing, operation & performance - Rugged & Durable Housing Construction, cabinet heatsink - built-in cooling fan - power on/ off switch - Pyramid compact hobby power supplies safe for tabletop placement technical Specs: - Amperage: 12. 0 amp (constant), 14. 0 amp (Surge) - Connectors/hardwire terminals: red positive (+), Black negative (-) - Power Output: 13. 8V DC - power input: 115V AC, 60Hz (270 watt) - Dimensions (L x w x H): 7. 9'' X 7. 2'' X 4. 7'' -Inches

• CONVERTS AC TO DC: The Pyramid Bench Power Supply features linear/regulated design. Provides convenient and reliable AC-to-DC power conversion (12V DC) w/ constant source of DC voltage. Works w/ cellular phones, CB radio, scanner, HAM radio, etc
• SCREW-TYPE TERMINALS: Features universal hardwired screw-type connection terminals that ensure compatibility with a wide range of devices, equipment, and components. Used for component and device equipment testing, operation and performance
• PLUG-IN OPERATION: The simple plug-in operation provides a constant source of DC voltage, allowing for quick and consistent power conversion. Switch-activated power control eliminates the need for an external battery or additional power source
• SHORT-CIRCUIT PROTECTION: Equipped w/ built-in electronic overload and short circuit protection to ensure the safety of the operator and any connected electrical devices. Also, fuse protected w/ auto reset. Perfectly safe for tabletop or desktop placement
• BUILT-IN COOLING FAN: The power converter features a cabinet heatsink and a built-in cooling fan to prevent the device from overheating. Constant amperage is 12A and surge is 14A w/ power output of 13.8V DC and 115V AC 60Hz 270W power input

User questions & answers

Question:	Are you 100% sure this unit has a cooling fan
Answer:	Yes
Question:	What is the benefit of the 14kx over the 9kx as far as bench testing a car stereo that requires 12v dc
Answer:	No
Question:	Will this work for a cb radio from President electronics
Answer:	Definitely it is not 12x12x12. PC itself about 6.75" diameter by about 6" height. The package dimension is approximately 6.5x13x8.
Question:	Will this power a fuel pump
Answer:	Yes, it does and very well. GREAT buy for sure.