14 best mtx car amplifiers

Product description

If you're looking to beat out your friends, then the MTX 12 inch subwoofer kit is for you. This MTX Terminator series subwoofer system includes 2 subs, sub enclosure and a car amp. With 1200 max power, it gives off super deep bass sounds, while keeping maximum sound quality. All you need to complete this subwoofer package is an amp wiring kit. Install your car audio right at home with all the right pieces at your fingertips with the Soundstorm 8 Gauge Complete Amplifier Wiring Kit with RCA. The 8 Gauge amplifier installation kit has everything you need to install your amplifier in your car. The amp kit features a 20 foot 8 gauge red power cable, competition high quality fuse holder, 3 feet of 8 gauge black ground cable, 16 feet of 18 gauge blue turn on wire, a 20 foot high performance RCA interconnect, 30 feet of speaker wire, 20, 4 inch wire ties, 3, rubber grommets, a Number 10 ring terminal, a 5/16 inch ring terminal, and a 1/4 inch ring terminal. Get more performance with your car audio and get it done yourself with the Soundstorm 8 Gauge Complete Amplifier Wiring Kit with RCA.

• ADD BASS: Add some bass to your car with the MTX 2 x 12 subwoofer Party Pack; The enclosure designs delivers bass that exceeds expectation; Each subwoofer can handle 200-watts RMS power (400-watts RMS for entire enclosure)
• HIGH QUAILITY: Enclosure is constructed with extra strength 5/8 inch medium density fiberboard to ensure the enclosure contains low frequency sound waves generated by subwoofer without problem
• MONO BLOCK AMPLIFIER: Includes a 250-watt mono block amplifier that easily connects to any source, including factory radios; Designed for use with TNE212D enclosure
• AMPLIFIER INSTALLATION KIT: Features a 20 foot 8 gauge red power cable, competition high quality fuse holder, 3 feet of 8 gauge black ground cable, 16 feet of 18 gauge blue turn on wire, a 20 foot high performance RCA interconnect, 30 feet of speaker wire, 20, 4 inch wire ties, 3, rubber grommets, a Number 10 ring terminal, a 5/16 inch ring terminal, and a 1/4 inch ring terminal
• SPECIFICATIONS: Subwoofer enclosure: Max power: 1200 watt; RMS power: 600 watt; Single 4 ohm voice coils per sub (pre wired down to 2 ohm load); Frequency response : 37 150Hz; Dimensions (HxWxD) : 13.875 x 29.625 x 13.875 inches

User questions & answers

Question:	Will this fit a 2011 dodge avanger
Answer:	Yes
Question:	Will this work in my 2006 chevy equinox
Answer:	Yes if you have aftermarket radio or the adapter to hook the amp up to factory radio
Question:	What are the dimensions of the subwoofer box
Answer:	The dimensions given in the description are for the amp. When I contacted the seller the informed me to contact the manufacturer, who has gotten back to me yet. So if anyone has the actual dimensions for the speaker enclosure that would be very helpful.
Question:	So does this come with the wire or not
Answer:	Just got it today. Mine didn't come with the wiring. Very disappointed

Product description

Get the most out of your entire car audio system with a small footprint amplifier that packs a big punch the MTX 500 Watt Mono D Bass Amplifier. This high quality MTX amplifier is designed to work with an assortment of subwoofers and is capable of delivering up to 1000 watts of peak power and 500 watts RMS in an incredibly small package. This monster amp features a high efficiency, class D topology. This type of circuit is preferred for driving subwoofers due to its ability to minimize power loss to heat when you rock all night long. To top it all off, this unit was designed to be installed in almost any vehicle thanks to its small chassis size.

• Class D Topology
• Variable LPF
• Selectable Bass Boost
• Small Foot Print Design
• Surface Mount PCB

User questions & answers

Question:	I have the mtx 12 in terminator subs and this amp, but I'm not sure what cords I need to get
Answer:	If your speakers are 4ohm speakers then hook up one speaker to each channel. And place wherever it won't matter. If your speakers are 8 ohm speakers like mine are wire two speakers to a channel. In my application I wired two speakers to channel 1, and two to channel 2 placed the speakers and sound good.
Question:	Will this work with my 2 mtx 7500 series 15's
Answer:	There should be a yellow RCA cord and a reverse wire that is located on the back of the stereo and a red (RCA STYLE) jack/cord attached to the camera. The yellow RCA cord needs to be attached to the yellow RCA jack on the camera (simple). The red (RCA STYLE) jack/cord AND reverse wire both need to be connected to a +12v wire that ONLY provides power when the vehicle is in reverse (example. reverse light). The left over black wire to the camera needs to be connected to chassis ground. *NOTE* the yellow RCA cord has a red lead on the beginning and the end that can be used to transfer power to the camera but, is NOT needed if utilizing the reverse light for power or CAN be used to eliminate the need to run both RCA and reverse (behind stereo) wire by connecting the reverse wire (behind stereo) to the red lead on the RCA cord. For someone who isn't an car audio installer this can be a bit confusing. Basically the stereo needs a wire to communicate the need to switch the screen display from default to camera feed (reverse signal wire) and the camera needs power (red and black wires) and a way to transfer information to the stereo (Yellow RCA cord).
Question:	We just got this hooked up and it's drawing .03 amps when it's off is anyone else having this problem
Answer:	Yes, it does.
Question:	Was just wondering if anyone knew if this sub would work well to push the mtx terminators
Answer:	No special card is need and you cannot use google maps

Product description

300W 4-Channel Class-AB Car Audio Amplifier

• 300W 4-Channel Class-AB Amplifier
• 4 Ohm: 60 watts x 4 ch. | 2 Ohm: 90 watts x 4 ch. | 4 Ohm Bridged: 180 watts x 2 ch.
• Frequency Response: 20Hz - 20,000Hz
• High Pass Filter (Variable): 40Hz - 250Hz 12dB/Oct
• Low Pass Filter (Variable): 40Hz - 250Hz 12dB/Oct

Product description

1500W Monoblock Class-D Car Audio Amplifier

• 1500W Monoblock Class-D Amplifier
• 4 Ohm: 650 watts x 1 ch. | 2 Ohm: 1100 watts x 1 ch. | 1 Ohm: 1650 watts x 1 ch.
• Frequency Response: 20Hz - 250Hz | Low Pass Filter (Variable): 40Hz - 250Hz 12dB/Oct
• Subsonic Filter (Variable): 20Hz - 50Hz 12dB/Oct | Bass Boost (0 - 12dB): 45Hz
• Includes Remote Bass Knob

User questions & answers

Question:	what is the peak power on this amp
Answer:	This product need to be connected manually for the first time, then it will automatically connect as long as the Bluetooth on the phone was turned on.
Question:	Would 2 mtx audio 7512 work ok
Answer:	Definitely Yes to both.
Question:	hello, everybody; any idea of dimensions
Answer:	Motion Man is incorrect. You can see in the photo, as expected, since this is for a MARINE installation, that you need 12V (car/boat battery) connected to it. You CANNOT plug this into 120vac outlet!!!
Question:	Will this amp push 2 12 MTX 9500 subwoofers
Answer:	The sound is good but in my opinion the volume is not loud enough for a party

Product description

Marine Audio describes audio components that are utilized in environmental conditions where water, humidity, or element exposure is prevalent. These tough MTX Audio products work great mounted in boats and pleasure craft as well as off road vehicles and toy haulers.

• Small Chassis
• Conformal Coated Circuit Board
• Surface Mount Technology

User questions & answers

Question:	Is this 100% waterproof
Answer:	Mine does activate Google Assistant (paired with Pixel 3)
Question:	can this be used to power 1 12" sub
Answer:	Works for Android as well
Question:	What is warranty
Answer:	The micro USB port is the charge port, you should have gotten the charge cord with the unit. You don't need to keep it plugged in but I suppose you could. The charge I think lasts a good 8 hours. Hope that helps.

Product description

1000W Monoblock Class-D Car Audio Amplifier

• 1000W Monoblock Class-D Amplifier
• 4 Ohm: 450 watts x 1 ch. | 2 Ohm: 775 watts x 1 ch. | 1 Ohm: 1100 watts x 1 ch.
• Frequency Response: 20Hz - 250Hz | Low Pass Filter (Variable): 40Hz - 250Hz 12dB/Oct
• Subsonic Filter (Variable): 20Hz - 50Hz 12dB/Oct | Bass Boost (0 - 12dB): 45Hz
• Includes Remote Bass Knob

Product description

500W Monoblock Class-D Car Audio Amplifier

• 500W Monoblock Class-D Amplifier
• 4 Ohm: 225 watts x 1 ch. | 2 Ohm: 375 watts x 1 ch. | 1 Ohm: 550 watts x 1 ch.
• Frequency Response: 20Hz - 250Hz | Low Pass Filter (Variable): 40Hz - 250Hz 12dB/Oct
• Subsonic Filter (Variable): 20Hz - 50Hz 12dB/Oct | Bass Boost (0 - 12dB): 45Hz
• Includes Remote Bass Knob

Product description

Terminator TNA201 mono amplifier: 100 watts RMS x 1 at 4 ohms (200 watts RMS x 1 at 2 ohms) variable high- and low-pass filters (50-250 Hz, 12 dB/octave) variable bass boost (0-18 dB boost at 40 Hz) preamp- and speaker-level inputs fuse rating: 20A x 1 8-gauge power and ground leads recommended — wiring and hardware not included with amplifier 11-3/4"W x 2"H x 10-1/2"D

• Terminator Series Class D Monoblock Car Amplifier
• Replacement Amp for TNP112D Systems - Comes in plain white box - No manual or spec sheet included
• 400 Watts Peak x 1, 120 Watts RMS x 1 @ 4 Ohms, 200 Watts RMS x1 @ 2 Ohms
• Both RCA and High-Level Inputs w signal sensing for automatic turn-on
• Variable low and high pass filters / Preamp RCA outputs to daisy chain multiple amps

Product description

The dB15 is a class D monoblock high power amplifier with 6,000 watts peak output, 3,000 watts RMS output, and 1500 watts CEA-2006 rated power. All of the mono amplifiers in the dB series are 2 ohm stable. They are all CEA-2006 compliant, which makes it easy to compare this amplifier to other CEA compliant amps on the market. Here at Rockville we offer the best value in car audio. We therefore want to make it easy for you to compare our products to any brands on the market. So we provided 3 ratings for all of our car amplifiers. We provided a CEA compliant rating, which you should use to compare this amplifier to other premium brands that make CEA compliant products such as Kicker, Rockford Fosgate, Kenwood, Pioneer, etc. We also supplied an RMS rating that is not CEA compliant, but has become standard in the industry. You should use this rating when comparing with ratings from brands such as Hifonics, Earthquake, DB Drive, etc. Lastly, we also supply a peak rating which almost all brands in the industry provide. This peak power is the amount of power the amp puts out at the loudest moments during a particular song.



One of the tricks to determine the real power of a car amplifier is to multiply the fuse rating by 10 to determine the true RMS power. This formula almost always works within 20 %. The dB15 features a Maxi fuse with a rating of 150 Amps. Although we rate these conservatively at 1500 watts CEA @ 2 ohms, this amplifier puts out more power than this!



This amp has a fully adjustable 12dB/Octave crossover with differential circuitry. Other features include a subsonic filter, a fully adjustable bass equalizer, mute and delay soft start technology, a phase control switch, and a dashboard subwoofer control for added convenience. The dB15 is protected by a full IC controlled circuit and has professional peak limiter circuitry guaranteeing distortion free music playback at all levels.

• Includes: Amplifier. Bass Remote. Birth sheet with tested power. Owner’s manual. Mounting Screws. Warranty.
• Rockville dB15 6000 Watt/3000 Watt RMS Mono Class D 2 Ohm Car Stereo Amplifier With Optical Coupler Technology. CEA Compliant Power Ratings (Rated at less than 1 % distortion) (Use these CEA ratings when matching and comparing with other CEA compliant brands such as Kicker, Rockford Fosgate, etc.). 2 Ohm: 1500 Watts x 1 Channel <1% THD+N. 4 Ohm: 900 Watts x 1 Channel <1% THD+N.
• RMS Power Ratings: (Use these RMS ratings when comparing with great brands such as Hifonics, Earthquake, Soundstream, etc.). 2 Ohm: 3000 Watts x 1 Channel. 4 Ohm: 1800 Watts x 1 Channel. Peak: (The amount of power the amplifier can produce for a split second at the loudest part of a song. 2 Ohm: 6000 Watts x 1 Channel. 4 Ohm: 3600 Watts x 1 Channel.
• High-Speed MOSFET Power Supply . Optical Coupler Class “D” Technology. Fully Adjustable 12dB / Octave Crossover with Differential Circuitry. Low Pass Filter: 50Hz - 250Hz. Subsonic Filter: 15Hz - 55Hz. Phase Control Switch. Full IC-Controlled Protection Circuitry. Remote Dashboard Subwoofer Control. Fully Adjustable 12dB Bass Equalizer. Mute and Delay Soft Start System.
• RCA Preamp Line Output. 8 Volt Preamp Circuitry. Status Mode LED Indicator. Minimum THD at Rated Power: 90dB. Under Voltage Protection at 10V. Over Voltage Protection at 16V. Frequency Response: 15Hz - 250Hz. Damping Factor: >150 @ 100Hz. 150 Amp Maxi Fuse. Dimensions: (W x H x L)9˝ x 2.4˝ x 17.8˝.

User questions & answers

Question:	Should i run 2 of power acoustik gw3-10 10" dual 2 ω 1000w rms subwoofer's on the rockville db15 6000 watt/3000w rms mono class d 2 ohm amplifier
Answer:	Yes, when you tune the same frequency between FM transmitter and the car radio,and connect Bluetooth from your phone, then it will play your YouTube music.
Question:	Can i use this amp for a 12 rockford fosgate p
Answer:	/Duration -:-Loaded: 0%Stream Type LIVESeek to live, currently playing liveLIVERemaining Time -0:00 Playback Rate1xChaptersChaptersDescriptionsdescriptions off, selectedCaptionscaptions off, selectedAudio TrackFullscreenThis is a modal window. .noScriptDisplayLongText { display : none; } .noScriptNotDisplayExpander { display : none; } .noScriptDisplayLongText { display : block; } Yes, it works with the Siri （Please active the Siri on your phone at first). Please see the video.
Question:	will this make 2 2000watt 10inch boss subs hit
Answer:	Nope
Question:	Will this amp be able to my two 12inch alpine type r
Answer:	No

Product features

Rockville dB15 6000 Watt Peak/1500w CEA RMS Mono 2 Ohm Amplifier Car Audio Amp

Description:

The dB15 is a mono amplifier with 6,000 watts peak output and 1500 watts CEA-2006 rated power. Here at Rockville we offer the best value in car audio. We therefore want to make it easy for you to compare our products to any brands on the market. The peak rating can be used to compare with brands who use peak ratings such as Boss and Power Acoustik while the CEA rated RMS rating can be used to compare with brands who rate their items using the CEA standard such as Kicker, Rockford, Alpine, etc.

One of the tricks to determine the real power of a car amplifier is to multiply the fuse rating by 10 to determine the true RMS power. This formula almost always works within 20 %. The dB15 features a Maxi fuse with a rating of 150 Amps. Although we rate these conservatively at 1500 watts CEA @ 2 ohms, this amplifier puts out more power than this! This amp has a fully adjustable 12dB/Octave crossover with differential circuitry. Other features include a subsonic filter, a fully adjustable bass equalizer, mute and delay soft start technology, a phase control switch, and a dashboard subwoofer control for added convenience. The dB15 is protected by a full IC controlled circuit and has professional peak limiter circuitry guaranteeing distortion free music playback at all levels. The RCA input accepts both balanced and un-balanced inputs. If there is potential inference in the car, the balanced input signal is less susceptible to noise. The dB amps by Rockville use the top parts and components recommended by Rockville’s very own engineer. These amps are the best sounding out of any series we have ever created. They perform more efficiently resulting in even dB of sound. We created them to be 2 ohm stable just like the world’s most famous amps by Rockford Fosgate, Kicker, etc. If you compare our amp to the most famous amps you will find our amp can compete and, in my opinion, surpass the performance of anything in its class.

Product description

MTX MUD50-2 50 Watt RMS 2-Channel Powersports Amplifier The MTX MUD50 .2 is the most compact amplifier that MTX has ever made. This unit features full range class D topology that delivers exceptional sound quality and excellent thermal efficiency. The unit includes 2 channels that are capable of delivering 50 watts of RMS power per channel. The entire unit is weather resistant including a conformal coated circuit board and control covers that prevent damage from moisture intrusion. The unique design includes a pigtail that contains all of the wiring necessary to connect power, ground, and signal without having to make a connection directly at the amplifier. This pigtail keeps moisture, dirt, and other hazards from harming the internal components of the unit, ensuring you can enjoy your music wherever the trail takes you. The compact nature of the amplifier and its excellent efficiency make it ideal for a variety of applications including UTV's and motorcycles. The amplifier footprint fits on most OEM motorcycle radios and its resistance to radio frequency interference make it the perfect choice for upgrading the stereo on any motorcycle. FEATURES: Compact Design - The small footprint chassis allows for installation in space challenged vehicles Conformal Coated Circuit Board - Protects against corrosion or circuit deterioration due to exposure to moisture or salt conditions Fixed Crossover - High and Low Pass Crossovers Allow Use with Full Range Speakers or Subwoofers High and Low Level Inputs - Allows connection to both Speaker and RCA Input signals SPECIFICATIONS: Description: 2-Channel 4Ω RMS Power Output: 25W x 2 Channels 2Ω RMS Power Output: 50W x 2 Channels 1Ω RMS Power Output: NA Topology: Full Range Class D Frequency Response: 11Hz - 40kHz Crossover: Fixed HPF @ 80Hz, 12dB/Oct Max Sensitivity: 200mV Maximum Input Signal: 5V Height: 3.64" (92.5mm) Width: 2.85" (72.5mm) Depth: 1.73" (43.9mm)

• Compact Design - The small footprint chassis allows for installation in space challenged vehicles
• Conformal Coated Circuit Board - Protects against corrosion or circuit deterioration due to exposure to moisture or salt conditions
• Fixed Crossover - High and Low Pass Crossovers Allow Use with Full Range Speakers or Subwoofers
• High and Low Level Inputs - Allows connection to both Speaker and RCA Input signals
• 4Ω RMS Power Output 25W x 2 Channels 2Ω RMS Power Output 50W x 2 Channels

Product description

700W 5-Channel Class-AB + D Car Audio Amplifier

• 700W 5-Channel Class-AB + D Amplifier
• 4 Ohm: 60 watts x 4 ch. + 275 watts x 1 ch. | 2 Ohm: 90 watts x 4 ch. + 450 watts x 1 ch. | 4 Ohm Bridged: 180 watts x 2 ch.
• Frequency Response: 20Hz - 20,000Hz (Main Channels) + 20Hz - 250Hz (Subwoofer Channel) | High Pass Filter (Variable): 40Hz - 250Hz 12dB/Oct | Low Pass Filter (Variable): 40Hz - 250Hz 12dB/Oct
• Subsonic Filter (Variable): 20Hz - 50Hz 12dB/Oct | Bass Boost (0 - 12dB): 45Hz
• Includes Remote Bass Knob

Product description

The MTX MUD100.2 is the most compact amplifier that MTX has ever made. This unit features full range class D topology that delivers exceptional sound quality and excellent thermal efficiency

• Package Dimensions: 31.496 cms (L) x 13.97 cms (W) x 5.334 cms (H)
• Package Quantity: 1
• Product Type: Car Audio Or Theater
• Country Of Origin: China

User questions & answers

Question:	Can you hook two of these amps together to run a subwoofer
Answer:	If the radio has an AUX plug-in chances are it will - mine still works fine (2009 Impala) - Norm Mahoney
Question:	will this run 4 speakers
Answer:	The volume control is on your car's radio/sound system. You have to sync this gadget with an completely free FM band on your radio. then you can play music or take calls through the bluetooth connection on the gadget and your phone. This gets channeled to the FM station you've synced with the device. You have to turn on your radio to get the sound and control the volume
Question:	Is this a 2 channel amp
Answer:	There are two mics. One is on the left side of the FM frequency, the other is on the below the LED lights.

Product description

Add some oomph to the sound system on your ATV, UTV, or motorcycle with the MTX Mud Series 400-Watt 4-Channel Amplifier. This compact class D amplifier features a full range topology that delivers exceptional sound quality. This powersports amp has 4 channels that are capable of delivering 100 watts of RMS power per channel. More than enough power to drive a single or dual full-range speakers per channel. The entire mini amplifier is weather resistant including a conformal coated circuit board and control covers that prevent damage from moisture intrusion. The unique design includes a pigtail that contains all of the wiring necessary to connect power, ground, and signal without having to make a connection. The compact nature of the outdoor amplifier and its excellent efficiency make it ideal for a variety of applications including UTV's and motorcycles. The amplifier footprint fits on most OEM motorcycle radios and its resistance to radio frequency interference makes it the perfect choice for upgrading the stereo on your motorcycle. The MTX Mud Series 400-Watt 4-Channel Amplifier is the perfect amplifier for building or upgrading the sound system on your outdoor recreational vehicle.

• INSTALL IN THE TINIEST OF SPACES: Compact design and small footprint chassis allows for installation in space challenged vehicles
• WEATHER-PROOF DESIGN: Conformal coated circuit board is protected against corrosion or circuit deterioration due to exposure to moisture or salty conditions
• WIDE RANGE OF ABILITY: Fixed high and low pass crossovers allow use with full-range speakers or subwoofers
• HIGH AND LOW-LEVEL INPUTS: High and low-level inputs allow for connections to both speaker and RCA input signals
• CONVENIENT PIGTAIL CONNECTION: Includes a pigtail that contains all of the wiring necessary to connect power, ground, and signal without having to make a connection directly at the amplifier

User questions & answers

Question:	Does this come with the pig tail adapter to wire up speakers
Answer:	I'm unsure why you would purchase this item if your vehicle has blue tooth. I purchased this because my vehicle doesn't have blue tooth. So hands free option for the phone , plus listening to Pandora is like having all the modern conveniences without buying a new car
Question:	Does this come with the mounting bracket
Answer:	Yes it is compatible with iPhone 8. I bought this when I first purchased my iphone 8. At that time iPhone 8's were not working well with some car bluetooth systems. I found this unit connected pretty easily. Unfortunately the microphone didn't work very well though. It worked great for music but not for phone calls, which is why I got it.
Question:	Can this amp be used for 2 tower speakers and a subwoofer
Answer:	Thanks for your inquiry, there are two options regarding your questions after your bluetooth connection between this car kit and your smart phone. 1. If you receive the phone call from this BK03 car kit, it will use this BK03 microphone. 2. If you use your smart phone speaker to receive the phone call, it will use your smart phone microphone. Note: if your smart phone is iPhone, you will use the phone speaker to receive the call if you press the call button from the iPhone. If you want to use the BK03 car receiver to receive the call, please press the " call button" of this BK03 receiver. Any further assistance, please contact us via e-mail: [email protected]. Thanks.
Question:	Has this amp ever been dyno tested for true rms power
Answer:	No. The clip is separate. Not sure how it attaches cuz I didn’t use it. I used the dbl face tape to attach to my dash.

Product description

XTHUNDER125.4 500W RMS 4-Channel Class A/B Amplifier by MTX Audio

Thunder Speaker Power

The XTHUNDER125.4 four channel amplifier powers high wattage speaker systems with room to spare, and without added distortion or over-heating during long hours of loud play.

The XTHUNDER125.4 utilizes class A/B amplifier topology to deliver the highest sound quality possible. Capable of delivering 125W RMS power per channel into a 2Ω load, the XTHUNDER125.4 is ideally suited to power MTX Signature Series and THUNDER series speakers. Customization includes variable high and low pass filters

XTHUNDER 125 Key Features:

• Class A/B Topology
• Low Profile Design
• Variable High Pass Filter
• Cast Aluminum Top Cover

Built To Drive Powerful Speaker Systems

The unit features a dual sided circuit board wiith increased copper traces that maximize electrical transfer and minimize power lost before it gets to your speakers.

Features

Class A/B Topology Delivers Excellent Sound Quality

Low Profile Design Allows for Installation Anywhere

Cast Aluminum Top Cover Efficiently Dissipates Heat

Variable High Pass Crossover

Variable Butterworth Crossover 12dB/Oct

Fixed Bass Boost Is Ideal for Use with Subwoofers

Thermal, DC Offset, and Short Circuit Protection Circuitry

Tech Specs

• 4 Ohm RMS Power Output 90 Watts x 4
• Signal to Noise Ratio >70dB
• 2 Ohm RMS Power Output 125 Watts x 4
• THD <0.2%
• Frequency Response 20Hz - 20kHz
• Maximum Input Signal 5V
• Max Sensitivity 100mV
• High Pass Filter Variable, 40Hz - 250Hz, 12dB/Oct Front/Rear
• Bass Boost 12dB @ 45Hz
• Topology Class A/B
• Depth 8.9" (226.7mm)
• Length 14.2" (359.9mm)
• Height 2.03" (51.5mm)

• Class A/B Topology Delivers Excellent Sound Quality
• Low Profile Design Allows for Installation Anywhere
• Cast Aluminum Top Cover Efficiently Dissipates Heat
• Variable Butterworth Crossover 12dB/Oct
• Fixed Bass Boost Is Ideal for Use with Subwoofers