10 best monopod with removable

Product description

Description:

This tripod monopod is made of Aluminum Alloy with durable and solid construction.

It is great and helpful for shooting when you travel outdoor, and also can be used as alpenstock.

15 degree tilt of stand base can help monopod achieve 360 degree panoramic rotation.

5-position leg adjustment system provides flexible shooting (25-22-19-16-13mm).

The included stand base can support monopod well, and offers great convenience to adjust different angles when you are shooting.

With its light weight, it is easy to carry when travel outdoor.

Specifications:

Material: Aluminum Alloy, Rubber Pad (Three feet of stand base)

5 section tube Diameter:25-22-19-16-13mm

Load Capacity: 11 lbs/5 kg

Net Weight:1.3 lbs/0.6 kg

Maximum Height: 66"/168 cm

Minimum Height: 20.5"/52 cm

Monopod Top Connection Screw: 1/4"

Monopod Bottom Screw Thread: 3/8"

Package Contents:

1 x Monopod

1 x T222 Stand Base

User questions & answers

Question:	Can this take a fluid head
Answer:	Yes
Question:	What is the purpose of the feet? They cant hold s csmera up
Answer:	The feet are to keep the support upright while you mount the camera. If it didn't have feet you would have to lean it against something. There are monopods that have sharp ends to push into the ground, if you are hiking and want to push into soil but I preferred the one with feet because I might use it in other places.
Question:	I have a panasonic lumix fz-300, but don't see it mentioned in the list of cameras for this monopod. any reason the lumix wouldn't work
Answer:	I don’t even know why there would be a list of cameras, yes it will work
Question:	Is it stable enough to support a small 360 camera at maximum extension without any help
Answer:	yes, although if the ground is not level it is a challenge.

Product description

Note: Camera is not included.

Description:

This monopod is made of carbon fiber with durable and solid construction.

It is great and helpful for shooting when you travel outdoor, and also can be used as alpenstock.

15 degree tilt of stand base can help monopod achieve 360 degree panoramic rotation.

5-position leg adjustment system provides flexible shooting. (Tube diameter: 25-22-19-16-13mm).

The included stand base can support monopod well, and offers great convenience to adjust different angles when you are shooting.

With its light weight, it is easy to carry when travel outdoor.

Specifications:

Monopod Material: Carbon Fiber

Number of Leg Sections: 5

5 Section Tube Diameter: 25-22-19-16-13mm

Net Weight: 1.3 lbs/0.6 kg

Maximum Height: 66 inches/168 cm

Minimum Height: 20.5 inches/52 cm

Folded Length: 19.68 inches/50cm

Monopod Top Connection Screw: 1/4-inch

Monopod Bottom Screw Thread: 3/8-inch

Maximum Load: 11 pounds/5 kilograms

Package Contents:

1 x Monopod

1 x Tripod Stand Base

1 x Wrist Strap

1 x Wrench

• SOLID CONSTRUCTION: Kit includes a carbon fiber camera monopod and a 3-leg tripod base, durable and solid; Note: Camera is NOT Included
• EXTENDABLE MONOPOD: The monopod can be extended to 66 inches/168 centimeters, folded to 19.68 inches/50cm; Max load weight is 11 pounds/5 kilograms for optimal performance
• SHOOTING AT DIFFERENT ANGLE AND HEIGHT: 15 degree tilt of the tripod support base can help monopod achieve 360 degree panoramic rotation; 5-section leg adjustment system provides flexible shooting at different height
• PORTABLE AND EASY-USE: With its light weight, it is easy to carry when travel outdoor; Can also be used as an alpenstock; 1/4-inch screw on the mounting plate to install your camera; 3/8-inch screw hole at the bottom allows you to install a mini tripod
• COMFORTABLE and ULTR-STABLE: Foam hand grip for comfort holding and stability; Wrist strap included

User questions & answers

Question:	Does the one with the base come with a bag
Answer:	We are awfully sorry for the experience. We stand behind our product with a warranty. As reimbursement, we would be happy to offer you a free replacement unit OR a full refund without the original item being returned. You may please email us at [email protected] to confirm the offer or let us know if there is everything else we can do to make things right for you. Best Regards, Lina from BSCstore on Amazon
Question:	Are the mounting screws both top and bottom, hollow or solid? Thanks
Answer:	No. The case is formed in such a way that the shape of the oasis is still there. So, just as you hold the oasis in your hand, the case takes the same shape.
Question:	Can I place a Godox Ad200 flash on top of it
Answer:	No, it doesn;t. It is only a protective case for the tablet. It does put the Oasis to sleep by opening or closing the cover, but there is no extra battery in the cover.
Question:	Can you lock the base so it is free standing
Answer:	I would not take it in water. The case seems like it is a pressed cardboard and the interior is a felt like material. It will definitely be ruined by water.

• EXTENDABLE MONOPOD: The monopod can be extended to 66 inches/168 centimeters, folded to 20.5 inches/52 centimeters; Max load weight is 11 pounds/5 kilograms for optimal performance
• SOLID CONSTRUCTION: Kit includes a monopod and a 3-leg tripod base which are made of Aluminum Alloy, durable and solid; Note: Camera is NOT Included
• SHOOTING AT DIFFERENT ANGLE AND HEIGHT: 15 degree tilt of the tripod support base can help monopod achieve 360 degree panoramic rotation; 5-section leg adjustment system provides flexible shooting at different height
• PORTABLE AND EASY-USE: With its light weight, it is easy to carry when travel outdoor; Can also be used as an alpenstock; 1/4-inch screw on the mounting plate to install your camera; 3/8-inch screw hole at the bottom allows you to install a mini tripod
• COMFORTABLE and ULTR-STABLE: Foam hand grip for comfort holding and stability; Included 3-leg tripod base can support monopod well

Product features

A one-legged tripod?

Sturdy monopod tripod

This monopod is made of aluminum alloy, which is sturdy and durable. It is lighter and stronger than ordinary tripods. It is suitable for long exposure and keeps the camera stable.

Easy and portable

This is not a bulky monopod tripod kit. The Nicama monopod tripod kit is ultra-portable, so you will be light on the road. The portable travel tripod can move freely. It is lightweight and easy to set up, and allows interchangeable accessories to be added.

Multi-function monopod

It is great when you are traveling outdoors, it is very helpful for shooting, and can also be used as a trekking pole, which is a must for bloggers or vlogger families who want to capture images anytime, anywhere.

Flexible structure

The 5-position leg adjustment system can provide flexible shooting. The 15-degree tilt of the tripod base can help the monopod achieve 360-degree panoramic rotation, panning and tilting movements, so as to achieve any angle required by the user.

Suitable for indoor or outdoor

The rubber feet hide the metal spikes used for sturdy outdoor terrain, but cover them to ensure indoor floor safety. Looking for a multifunctional monopod? The monopod expands the shooting possibilities, which is an ideal stabilization solution for capturing clear images and smooth videos with a compact camera.

Specifications:

• Maximum Load: 7kg
• Number of Leg Sections: 5
• Three Feet Support Stand A1: size :22*22*22CM
• Three Feet Support Stand connection screws is: 3/8"
• Monopod top connection screws : 1/4 - 3/8"screw
• The thread at the bottom of the monopod is: 3/8"screw
• Monopod Max Height: 163cm /64 inch Monopod + Three Feet Support Stand Max Height :165cm / 65inch
• Monopod + Three Feet Support Stand Folded Length: 50cm / 19.5 inch
• Legs diameter :Φ25,Φ22,Φ19,Φ16,Φ13mm
• Monopod + Three Feet Support Stand Net weight: 0.62kg

Product description

The video carbon fiber monopod kit is lighter and has a larger load, the weight is only 6lb/2.7kg and max load is 13.23lb/6kg. It is perfect for sporting events, travel and outdoor shooting.







Specificaions



Brand: INNOREL



Material: Aluminum Alloy(body), Carbon Fiber(tubes)



Mounting Platform: 1/4", a spare 3/8" screw



Sections: 4



Max. Height: 72in/1820 mm



Min. Height: 28in/720 mm



Max Load: 13 lb/6 kg



Weight: 6 lb/2.7 kg



Tilt range: -70° to +90°



Pan range: 360°



Tube diameter: 32mm/29mm/26mm/22mm







Packing List



1. Monopod bag*1



2. VM75CK*1



3. Pan bar*1



4. Allen key*3



5. Warranty card & manual*1



6. 3/8"-1/4" adapter*1

• 【High Quality】--The video monopod is made of high quality aluminum alloy. Leg tubes are made of genuine 10 layers carbon fiber, which is stronger and lighter. The fluid head rotates smoothly and without noise which can perfectly meet wide working range needs.
• 【Strong Compatibility】--There is a 3/8" screw hole in the hydraulic fluid head which can be used with most popular equipments,such as a magic arm, so that you can make the telescope and mobile phone shoot at the same time.
• 【Multifunctional Tripod Base】--The base of VM75CK monopod can be easily switched from vertical mode to horizontal, it helps you deal with complex shooting environment. The removable base can be used as a Mini table-top tripod too.
• 【Hydraulic Fluid Head】--Excellent details everywhere can be seen everywhere. Featuring pre-set counterbalance, 360°rotation, -70° ~ +90° tilt and CNC technology make the hydraulic fluid head a wide range of motion and smooth damping.
• 【Guarantee & Specifications】Limited 5-Year Warranty | Max Load: 13.2lb/6kg | Height Range: 28 in to 72 in | Material : Carbon Fiber (Tubes) Aluminum Alloy (Body) | Tube diameter: 1.3in/1.1in/1.0in/0.9in

User questions & answers

Question:	Are the feet all metal or are there plastic parts? thanks
Answer:	The main feet of VM70K are made of metal which is very stable and durable.
Question:	Does this monopod stand on its own
Answer:	Yes, there is a tripod base of VM70K, it can stand on the plane without manual support.
Question:	Can you use manfrotto 501 quick release plates
Answer:	Yes, the fluid head can fit Manfrotoo quick release plates.
Question:	Can the fluid head be removed and use a ball head for photography purposes? i want to use this monopod both for video & photography works
Answer:	Of course you can. Don't worry, it can fit with fluid head and ball head.

Product description

Specifications:

Material : Carbon fiber

Monopod top connection screws : 1/4 - 3/8"

The thread at the bottom of the monopod is: 3/8 screw

Max Height :168cm (66inch)

Folded Length: 50cm (19.5inch)

Number of Leg Sections: 5

Legs diameter :Φ25,Φ22,Φ19,Φ16,Φ13mm

Net weight: 0.56kg /1.23lbs

Maximum Load: 7kg / 15.4lbs

Three Feet Support Stand A1:

size :22*22*22CM

Three Feet Support Stand connection screws is: 3/8"

Packaged : 

Carbon fiber monopod x 1 

Tripod Support Base x 1

Metal spikes x 1

Pocket x 1

hex wrench x 1

monopod bag x 1 

• ★ Monopod made of high-density lightweight 8-layer 100% carbon fiber for added strength,high-efficiency shock absorption, better heat resistance and corrosion resistance. Lightweight and Durable.Heavy only:0.56kg / 1.23lbs, it is the best choice for outdoor travel photography.
• ★ 5-section monopod, the folded length is 50cm/19.5inch, the maximum extended length can reach up to 168cm / 66inch, space saving and easy to carry.
• ★ Universal Mounting Plate with Reversible 1/4"-20 & 3/8"-16 screw of the Monopod with feet is matched to a variety of Ball Head as well as any professional camera and DSLR cameras, which can be directly installed
• ★The maximum diameter of the monopod is 25mm, maximum weight capacity can reach up to 7kg/15.4Ibs,also can be used as a hiking stick when necessary.
• ★ The tripod support base can help the monopod achieve 360 degree panoramic rotation and tilt of 20 degrees. The removable base can be used as a mini table tripod.

User questions & answers

Question:	When i turn to left it unscrews rather than panning. There is no way to tighten the screw? I have to glue it
Answer:	No, I’m right handed but shoot with a left handed bow because I’m left eye dominant. It is based on eye dominance and not hand orientation.
Question:	Can it support a full length telephoto w/SLR
Answer:	Hi! thanks for reaching out to Keshes Archery with your question. 1.You want to know if you can use our takedown recurve bow for archery competitions, yes our recurve bow archery set is perfect for competition and its perfect for any other way and place you want to shoot, in addition you can to take in mind that with keshes you get a takedown bow including our keshes stringer tool which will help you that can always take apart and have it compacted till you get to your game which makes it much easier to carry and travel and just set it up on the field in under a minute using the stringer.2. Our keshes bow as of now is only left handed bow, which means that you hold the bow with your right hand and and draw with your left hand, however we will post our keshes right handed bow very soon should hopefully be ready in the next month you can look out for it on out amazon page.Thanks again for contacting Keshes Archery. I hope that I was able to clarify all your questions, please feel free to reach out to us for any questions you have.
Question:	Are the feet all metal or are there plastic parts? thanks
Answer:	Hi, and thanks for reaching out to us before you buy to assure that you will get your accurate bow. Your first question on what size arrow you should get, this is all depending on each person which means that you will have to measure your draw length first and then you add to that about 2 inches that should be the total size of your arrow. Let me explain how to do that. in general the way to measure your draw length is by measuring your arm span by stretching out both arms like a T and you measure the length from one end to the other, then you divide this amount by 2.5, this should be your total draw length now you can about 2 inches to this number and this is your arrow length size the average person has a arm span of 70 inches divided by 2.5 is total 28 inches draw length so this guy has to buy a 30 inch arrow length. Your second question of what size bow to get for a beginner? i think that your choice of the 20lb. draw weight is a very good choice for a beginners level its always best to start with low weight and then grow it with your experience. if you still have any other questions please feel free to reach out to us again. we will be happy to help you. Lori, At Keshes Archery
Question:	How much does it weigh
Answer:	30 to 31 inch arrows.

• 【Lightweight & Sturdy】Made of 8 layers of carbon fiber, MOMAN C65L monopod weighs only 0.68lbs/0.31kg but possesses 25mm large diameter and 11lbs/5kg payload, keeping your DSLR cameras steady and effectively shock-proof.
• 【5 Sections & Quick Lock】The 5-section integrated monopod can be adjusted from 18”-65”/45cm-165cm height, catering for different shooting needs. The anti-slip & dustproof Quick-Locking System allows you to rotate 1/4 circle to tighten/loosen and increases working efficiency.
• 【1/4” & 3/8” Thread Mount】The ergonomically-deigned platform with reversible 1/4” and 3/8” screw accepts almost all kinds of DSLR and professional ball head mounts.
• 【Multifunctional Tripod Seat】The included strong and steady tripod seat built with 3/8” screw can be connected with monopod well or directly installed with a ballhead mount. With angle adjusting knob, it allows 360-degree rotation for panoramic shooting.
• 【Comfortable Grip & Stable Design】The non-slip soft foam grip and wrist strap ensure a safe & warm hold and prevent accidental dropping of your devices. The replaceable rubber foot and nail are adaptive to all flooring and terrain e.g. grass, sand and more.

Product description

CD324 monopod + Fluid Head + 3-leg unipod holder to give you a versatile still or video camera support system.



★Features:



1.The CD324 Carbon Fiber 4-section monopod is able to extend to 71.25" fully and featured with a removable 3-Leg support stand, which allows for smooth pan and tilt movements due to a ball joint that can be locked with a wingnut-style locking collar. The monopod loading plate adopts a reversible 1/4" - 3/8" mounting screw to make it suitable for most DSLR cameras.

2.Separate locks for pan and tilt functions, a built-in bubble level indicator.

3.Interchangeable pan bar handle, with angular adjustment, allows both right and left-handed use.

4.Four-section leg with flip locks, allows you to adjust the height of the monopod from 27.55" to 71.25".

5.The collapsible 3-leg support base featured with vertical lock knob, allow the kit incline 15° and revolve 360° around the fulcrum.

6.Wrist strap and hand grip for comfortable hold and insulation.



★ Fluid Head



Quick Release Plate: Yes, with a 1/4" screw and one spare 3/8" screw

Tilt range: -70° to +90°

Pan range: 360°

Friction Control: Fixed

Bubble level: Yes

Tilt Lock: Yes

Pan Lock: Yes

Pan Handle: Yes

The pan bar handle can be used either left and right of head for needed.



★CD324 Monopod



Leg Material: Carbon Fiber

Mounting Platform: a reversible 1/4" - 3/8" screw

Max. Tube Diameter: 1.3" /32.5mm

Sections: 4

Max. Operating Height: 71.25"/1810mm

Min. Operating Height: 27.55"/700mm

Folded Length: 27.55"/700mm

Loading Capacity: 13.2 lbs / 6kg

Net Weight: 5.9 lbs /2.7kg



★ Package listing:



1x CD324 Carbon Fiber monopod

1x fluid head

1x table tripod

2x QR Plate

4 x Hex Keys

1x Carrying bag

• ☑Lightweight & Compact:Supporting loads up to 13.2 lbs, folded to 27.55", good for travel and hiking
• ☑Fluid head with removable pan bar, gives you smooth shot horizontally and vertically
• ☑Carbon Fiber leg in 4 sections with flip locks enable fast and fumble-free set-up. Extend to 71.25 inches.using a supplied Y-style key, the user can tighten the screw on each spring-loaded flip lock to safeguard their continued reliable performance
• ☑The collapsible 3 feet support base featured with patent vertical lock knob, allowing the monopod to incline 15° and revolve 360° around the fulcrum
• ☑Adjustable height: 27.55" to 71.25" | Tilt range: -70° to +90° | Pan range: 360° | Max Load: 13.2 lbs | 6-Year Warranty |Please don't leave the monopod standing alone but always keep it with your hand

User questions & answers

Question:	how long is just the monopod if you remove the fluid head and feet
Answer:	You will want to use the feet, and the head. This is a phenomenal little monopod for the price; it's lightweight, I've used it on events as well as wedding and sports events. I use it in conjunction with my tripod made by the same company, they work great.
Question:	Can you adjust the fluid head pressure
Answer:	I didn’t see any adjustment. If you’re interested in this for the fluid head then it should be noted that the handle that pivot and moves the fluid head does not lock in. It rotates and moves freely which may be problematic for video.
Question:	Does this monopod stand on its own
Answer:	Yup, it can stand on its own. The 3 legs have 2 stances that it can stand on, a flat and mid-level one.
Question:	Will it hold a Canon 80d wih a 70-300mm usm II lens
Answer:	Yes. I have use the Avella with a 90D and a 7D mk2. I’ve used a Tamron 70-200 and a 18-400, both heavy lenses, with the Avella. The Avella holds both steady.....however I have not used to mono-tripod on uneven ground (i.e. hiking). I love the mono-tripod and use it almost exclusively. I am looking forward for taking it on hikes when spring time comes.
Question:	Does the one with the base come with a bag
Answer:	Yes
Question:	Are the mounting screws both top and bottom, hollow or solid? Thanks
Answer:	I'm not sure what you mean by "hollow." They're both solid. The top one is half 1/4-20 and half 3/8-16. The tripod at the bottom can be replaced by a point or a rubber tip. This is a very good design, and a very versatile unit.
Question:	Can I place a Godox Ad200 flash on top of it
Answer:	This has a screw at the top like Tripod legs. It’s designed for a head of some sort but you can buy a stud adapter that screws on and you can mount your Godox to that.
Question:	Can you lock the base so it is free standing
Answer:	Yes but it’s not very sturdy

Product description

Specifications:

Material : Aluminum 

Monopod top connection screws : 1/4" - 3/8"

The thread at the bottom of the monopod is: 3/8"

Monopod + Three Feet Support Stand Max Height :160cm / 63inch

Monopod + Three Feet Support Stand Folded Length: 47cm / 18.5inch

Number of Leg Sections: 5

Legs diameter :Φ32,Φ28,Φ25,Φ22,Φ19, (mm) 

Maximum Load: 10kg/22lbs

Monopod + Three Feet Support Stand Net weight: 0.93kg / 2.05lbs

Package weight: 1.21kg / 2.66lbs

Three Feet Support Stand A2 base:

Size : 28x28x28CM

Three Feet Support Stand connection screws is: 3/8"

Packaged : 

koolehaoda K-338A monopod x 1 

Three Feet Support Stand x 1

3/8 "metal spikes x 1

monopod bag x 1 

Pocket x 1

• ● Reversible 1/4"-20 & 3/8"-16 screw on the mounting plate.
• ● Extends to height of 63-inches , 5-section screw leg-locking system for secure height adjustment.
• ● Use this Monopod for digital, video and film cameras .Foam hand grip for comfort and stability ,Lightweight and Durable.
• ● Monopod can be used to alpenstock . It is light and convenient, also give you other choice.
• ● Monopod is Large diameter design,The maximum diameter is 32MM, the bearing capacity is strong, and the maximum load can reach 10kg /22lbs

Product description

Specifications:

Model: MP-325L+ M3 (Black)

Material: Aluminum Alloy

Monopod Max Height: 166cm / 65.3 inchs(Max.)

Monopod top connection screws : 1/4 - 3/8"screw

The thread at the bottom of the monopod is: 3/8"screw

Number of Leg Sections: 5

Legs diameter :Φ31, Φ28, Φ25, Φ22, Φ19MM

Monopod + Support Base Folded Length: 50cm / 20 inchs

Monopod + Support Base Extended Length: 173cm / 68inchs(Max.)

Load Capacity: 10kg /22lbs

Monopod + Support Base Weight: 1kg /2.2lbs

Package Size: 54 * 7 * 7cm / 21.3 * 2.8 * 2.8in

Package Weight: 1.33Kg / 2.92lbs

--------------------------------

Name: Tripod Base

Material:  Aluminum Alloy & Rubber Pad

Connecting Screw Diameter: 3/8"

Moving Ability:  /- 20° Tilting, 360° Panning

Folded Length : 15.5cm / 6.1in

Net weight: 420g / 0.92lbs

Load Capacity : 25kg/55lbs

Package List:

1x MP-325L Aluminum Monopod

1x Tripod Base

1x Carrying Bag

1x Rubber spike

1x Metal spike

1x Allen wrench

1x Instruction manual

• ★The monopod is made of high-quality aluminum alloy with a metal tripod base to increase strength, increase load capacity and reduce vibration. Ultra-long rubber locking knob design,makes the hand feel more comfortable, and the locking force is stronger. Weighs only 1kg / 2.2lbs.
• ★5 extendable sections ,The monopod can be extended to 68inch/173 cm, folded to 20inch/50cm; Leg Maximum diameter: Φ31mm;Max load weight is 10kg / 22pounds for optimal performance.
• ★Universal Mounting Plate with Reversible 1/4"-20 & 3/8"-16 screw of the Monopod with feet is matched to a variety of Ball Head as well as any professional camera and DSLR cameras, which can be directly installed.
• ★ The tripod support base can help the monopod achieve 360 degree panoramic rotation and tilt of 20 degrees. The removable base can be used as a mini table tripod.
• ★ Monopod with rubber feet and metal spike for added stability. Suitable for shooting in various scenes and ground. Monopod can be used to alpenstock . It is light and convenient, also give you other choice.

User questions & answers

Question:

Is it invisible i’m wanting to use it for virtual tours with my 360 camera i know i’ll have to manually remove the feet but what about the monopod

Answer:

DON'T EVER BUY SAFETY GEAR FROM AMAZON! I never reviewed or bought this product but Amazon is asking for my feedback. I did buy roof racks and they snapped and twisted like a curly pasta noodle after less than 4 months of use. Flying across 4 lanes of freeway traffic was my new kayak in the middle of the cold rainy night. I had them professinally installed but the rack themselves are what failed. I had a lightweight kayak and it couldn't handle it. Don't trust any roof racks or safety equipment from Amazon. They don't care if the product is completely unsafe and will not offer any assistance if the product fails dangerously. They didn't bother to read the details of a highway incident related to roof racks sold on their website. They sent back a scripted reply. I had to point out to them how a serious accident or death might have occurred. They wrote a gee we are sorry note and did nothing. The roof racks are still on their website. Money is the only concern. Human lives are secondary. Bezos sucks!

Product description

MONOPED64 is the latest monopod launch from Davis & Sanford and comes with a lineup of features at an extraordinary price. The maximum height will take you to 64" and a minimum height of 24" giving you perfect amounts of flexibility when a tripod is not practical. The MONOPED64 also features a folding base which has a built-in pivoting ball to easily position or angle your monopod when you need to create the perfect shot. There is no head with the MONOPED64 giving you the freedom to choose from a list of Davis & Sanford heads available on Amazon including the latest FX13 Video and Stills head with selectable counterbalance.

• Lightweight, compact 64” monopod is ideal solution when a tripod is not practical
• Sturdy folding aluminum leg base adds extra support
• 12 pound capacity
• Folding base has built-in pivoting ball to easily position or angle your monopod
• Mounting stud: 1/4"-20 and 3/8”-16

User questions & answers

Question:	Is this monopod compatible with Ricoh Theta Z
Answer:	realistically ... no . the corners will pop off as you stated. the design has a flaw . i fixed that by running a thin rope across the seats between the upright and the bottom base. this anchors it ant the corners remain grabbed. as far as the product itself its very well worth the price. it is a water proof class material. im very pleased with it. its difficult to design a universal seat cover for the vast different types of seats there are. this one works very well it just needs a center anchor . a thin rope did the trick.fred
Question:	Does the feet stand still? And what is the max weight it can support
Answer:	This mat is great to keep dogs in place. Their claws do grip this material which is like a thick mesh. My only complaint is that is moves up from the edge of the seat. It has elastic grips along the front edge but since my seats are leather as well, it doesn't hold on the front edge. This is not a huge problem for my dogs since they are all small . Hope this helps.
Question:	Do you have the adapter
Answer:	It has repeled water and dirt well. Doesn't stink up but I havent had the need to wash it. But I don't see there being a problem when I decide to do so. Great product
Question:	Can you lock or tighten the base ballhead so that it won't tilt or move
Answer:	More close to a Bakelite product. Let's say, a very very very strong plastic.😊I absolutely love it!