10 best motor alarm with remotes
A motor alarm with remotes, also known as a car alarm system, is an electronic security device designed to protect vehicles from theft or unauthorized access. This device falls under the category of electronics and is commonly used in the automotive industry.Here are the key points to know about motor alarms with remotes:
Purpose: The primary purpose of a motor alarm system is to deter theft and break-ins of vehicles. It achieves this by sounding an alarm when certain security triggers are activated.
Components: A typical motor alarm system consists of several components, including:
- Control Unit: The brain of the system that processes signals from sensors and remote controls.
- Sensors: These include various types like shock sensors, proximity sensors, and motion detectors, which detect unauthorized access or tampering.
- Siren: A loud audible alarm that activates when a breach is detected.
- Remote Controls: Small handheld devices that allow the vehicle owner to arm, disarm, and control the alarm system.
- LED Indicator: A visible indicator often mounted on the vehicle's dashboard to show the alarm status.
Functionality: When the motor alarm system is armed, it continuously monitors the vehicle for any suspicious activities or security breaches. If it detects any such events, such as an attempt to break a window or open a door, it triggers the alarm.
Remote Control: The remote control allows the vehicle owner to arm or disarm the alarm system remotely. It may also include additional functions like locking and unlocking doors, popping the trunk, or activating panic mode.
Panic Button: Many motor alarm remotes have a panic button that, when pressed, activates the alarm, sounding the siren and flashing the vehicle's lights. This is useful in emergency situations.
Sensitivity Adjustment: Some motor alarm systems allow users to adjust the sensitivity of the sensors to reduce false alarms caused by minor vibrations or movements.
Visual Deterrent: The presence of a visible alarm system, such as a blinking LED indicator or a prominently placed siren, can act as a deterrent to potential thieves.
Integration: Modern motor alarm systems can be integrated with vehicle security and immobilization features, such as engine immobilizers and GPS tracking, to enhance vehicle protection.
Installation: Motor alarms can be installed by professionals or as aftermarket products. It may require electrical wiring and expertise for proper installation.
Benefits: Motor alarms provide peace of mind to vehicle owners by offering an additional layer of security. They can help lower the risk of theft and may also lead to reduced insurance premiums.
In summary, a motor alarm with remotes is an electronic security system designed to protect vehicles from theft and unauthorized access. It consists of various components, including sensors, a control unit, a siren, and remote controls, allowing vehicle owners to arm, disarm, and control the alarm system remotely. This technology serves as a deterrent and offers added security to vehicles.
Below you can find our editor's choice of the best motor alarm with remotes on the marketProduct description
Description:
1.High power Transmitter Control
Channel: 1 CH
Encode: Fixed code, soldering
Frequency:433 MHz
Power Supply: 1 X 9V Battery
Specification:
Working Voltage: AC/DC 9V-85V12V-48V 12V 24V 36V 48V
Working Frequency: 433MHz
Max Current: 30A
Contact Capacity: 30A/250VAC; 30A/30VDC
Operating Temperature: -40'C~ 80'C
Output State: Momentary/Toggle/Latched adjusted freely by the Jumper on the receiver.
Size: 65*37*17mm(PCB Board ,not included the cover)
Size with Cover: 5.6X4.2X3 CM
Receiver Sensitivity: -105dBm
Code: Learning code
Working ways:
Toggle/Self-Lock: Press->On; Press again->Off
Latched/Inter-Lock: Press->On; Press other button->Off
Momentary/Jog: Press and hold->On; Release->Off
Keep pressing one button is working /ON. loosen your finger is stop/OFF.
The work model can free change in mode pin(self lock default set)
Learn code and Remove Code
1. Learn: Press the learning code, the indicator from on to off, loosen your finger, press any button of the remote control, the indicator flash 2 times and off. It means you learn it successfully.
2. Remove: Press the learning button about 8 seconds, the indicator turn on to off, it means the Code had been removed successfully.
Package:
1/2X Remote Control transmitter (Battery included)
1X 9V-85V receivers Switch (With cover)
1X Manual
- Wireless Remote Switch with Long Range Voltage 9V/12V/24V/48V/72V/85V
- Switch for Anti-Theft Alarms Door Motor Cycles Smart light switch Universal Relay switch Model
- 30A relay of receiver , which can load high-power electrical appliances to ensure long-term stability control.
- Extremely easy to setup, learn, relearn and control. Stable and reliable performance, high receive sensitivity.Configuration of 2 remote controls,more flexible use.
- Wide Application:It is mainly used in 12V-72V (industrial control and security fields, such as light, motor, remote controller, wireless security alarm, wireless door alarm, wireless controller, etc.)
Product description
Product parameters:
1. Vibration alarm (alarm range: 1500m)
2. Suspension mode (optional)
3. Automatic assembly (433,92 MHZ)
4. Manual or automatic transmission
5. Programmable start temperature motor
6. Programmable turbine timer
7. Programmable remote alarm mode (vibration, sound or both)
8. Programmable bypass impact sensor
Remote start and engine preheating
10. Motor starts automatically under temperature setting and alarm clock
Remote start engine for gasoline/diesel vehicles
12 hours a day screen and alarm clock
Voltage and temperature display on the car remote control
Two-way automobile alarm LCD display
Hd bidirectional LCD monitors your car's safety 24 hours a day in real time.
From the engine to
Remote engine start allows the car to pre-cool or warm up in hot/cold climates.
Warning vibration sensor
If the car is invaded illegally, the burglar alarm will be activated immediately.
The timer starts the motor
Turbo timer mode protects your engine and extends its service life.
Emergency mode/location search vehicle
Open emergency/search mode to locate your car accurately and easily.
- Remote engine start allows the car to pre-cool or warm up in hot/cold climates
- Turbo timer mode protects your engine and extends its service life.
- If the car is invaded illegally, the burglar alarm will be activated immediately.
- Hd bidirectional LCD monitors your car's safety 24 hours a day in real time
Product description
General Motors 20873623, Remote Control Transmitter for Keyless Entry and Alarm System
- Genuine General Motors OEM product
- 110V/60Hz AC Motor with built-in control unit. Gear Rack Driven.Total 13.12ft racks includes.
- For the gate, with restriction of 1350lb maxium weight and 26ft maxium length.
- SECURITY -- When the motor keeps working over about 15 minutes,reach to 120℃,it will stop for safety.
- REMOTE CONTROL -- Single button mode,one same button on the remote control to circularly control the main engine OPENS/STOP/CLOSE/STOP. Support for adding & delete remote controls, at most 25 remote controls can be learned.
- INFRARED CONNECTION -- In this closing process, when infrarad ray of the infrarad sensor is covered, the gate will open immediately, to protect user and property security.
- AUTOMATIC CLOSE TIME SETTING -- 12s, 24s, 36s and no automatic close function.
User questions & answers
Question: | can I put one on the left side of the opening and one on the right side and have them work in sync to open the gates one slides left and the other hal |
Answer: | The box displayed in the item listing was inside of a generic brown Amazon box or generic white Amazon envelope (don't remember which, but it definitely had an outer layer of packaging). I didn't verify every bit of text on the labels on the outer packaging, but believe it's just a generic Amazon label w/ possibly order number. I don't remember seeing anything listing contents. |
Question: | Does this opener have option to connect with a WiFi device from Pearok or alike to open/close the gate with a mobile phone |
Answer: | No |
Question: | I have a 20 feet opening. How/where do I order more rack |
Answer: | The xtra long cord on this massager is 65 inches long. Thank you for shopping with us. ~Vert Delivery |
Question: | Where was this product made |
Answer: | The infrared lights create a slight warming near the massager after a few minutes. The body gets a little warm after 45 minutes of use. Thank you for shopping Vert Delivery! |
Product features
Technical Parameters:
Model: DK1350
Power Supply: 110V/60Hz
Motor Power: 280W
Output Torque: 16N.m
Output Shaft Height: 46mm
Gate Moving Speed: 36-42ft/min
Maximum Gate Weight: 1350lb
Maximum Gate Length: 26ft
Limit Switch: Magnetic limit switch
Driving Mode: Gear
Feature:
- 1.DK1350 is with a gear rack driven system, in a high quality.
- 2.AC motor with buit-in control unit.After the power is cut off, the clutch can be released and the gate can be opened manually, manual release key design for emergency purposes.
Note:
- Please make keep the rails from any debris to ensure the smooth operation of the gate.
- The distance between photocell receiver and photocell emitter should be not less than 6.56ft , otherwise will affect the induction of the photocell.
- 🎄 Mini Size: 65mm*45mm, Compact with creative design.
- 🎄 Waterproof: PC material shell, IP55 waterproof, can use for outdoor.
- 🎄 Super Loud Burglar Alarm: 113db, will be a great deterrence. 7 level adjustable sensitivity. Not only design for Bicycle, Motorcycles, can also works with e-bike, scooter, door and winodow.
- 🎄 Easy Operation & Installation: With Remote Control, it's convenient to arm, diarm alarm, One-key find vehicle. Remote control distance up to 20m. Two install methods, paste it with double-sided sticker or tie it with straps.
- 🎄 Expandable: If you need extra remote controls for family member or just for spare. Just order "More Remote Control" in the "Special offers and product promotions".
User questions & answers
Question: | Is it still like so loud it is an alarm already just activating |
Answer: | Yes the alarm is loud and resets after 30 seconds you can adjust the volume but I don't recommend it. |
Question: | Can one remote be setup to operate two alarms at the same time |
Answer: | Not entirely sure on that because they come wireless and would be a problem if other peoples remote can unlock it also |
Question: | can you download your own preferred sound |
Answer: | Hi, there are 6 bell sound available, I am sorry that the bell cannot be customized. Any questions or demand, feel free to contact me anytime. Mengshen |
Question: | do u have to pair it up each time u put new batteries in it |
Answer: | No. Put the batteries in, test the system, and you’re ready for action. It will always be paired. I have done this numerous times. |
Product features
Mengshen Anti-theft Bicycle/ Motorcycle/ Door Window Alarm - Z08
Thanks for coming, you deserve the best! This is Mengshen's Anti-theft Bicycle/ Motorcycle/ Door Window Alarm - Z08
113db Super Loud Burglar Alarm
Remote control operation - simple & convenient
Easy Installation
Installation accessories: 2 * Mounting Strips, 2 * Double-sided sticker
There are also installation holes and interface on the back of the alarm, so it is very easy to install the alarm on your bicycle or motorcycle.
Spare remote control
1) For extra remote control, you can search "Mengshen AR01" to order it,
2) The extra remote control need to pair with the host alarm before using
How to pair?
Long press the ringtone key(the forth key) of the old remote control until hear sound "Bi", then press the arm or disarm key of the new remote control, the host alarm will ring "BI...Bi" to remind the pair is successful, you can use the new remote control now.
Wide Application
With strong durable PC housing, it is waterproof and dust-proof, very suitable for outdoor use.
It is widely used on bicyle/ e-bike/ motorcycles/ self baslancing scooter, door and winodow.
Power Supply:
Host battery: 3*AAA alkaline batteries (Included)
Remote control battery: 12V/27A alkaline battery (Included)
- SUPER LOUD 113DB - Vibration triggering loud alarm to scare away thieves.Prevent Robbery and Door Prying.
- ADJUSTABLE SENSITIVITY - High sensitive vibration sensor,7 level from gentle touch to push or beat.Adjustable volume.
- EASY OPERATION - Control with remote, searching vehicle and fall for help SOS function.
- EASY INSTALLATION FIRM AND WATERPROOF - No wiring, no screw,provide super strong adhesive tapes and cable tie for installation.IP55 waterproof design, can use for outdoor.
- MINI SIZE - 3.7"*1.6"*0.8" exquisite and compact design, easy to hide and install, suitable for bike/car/motorcycle/door/moped anti-theft alarm.
User questions & answers
Question: | can the remote for the alarm be used to activate the alarm to scare a dog in my garden from inside my house |
Answer: | Yes, you can. |
Question: | can i use this on top my car to scare off birds |
Answer: | Yes, it fit my 2019 YXZ1000R SS perfectly. |
Question: | I have an electric car. Could I put this in the trunk, set at it lowest level of sensitivity, and use the remote to sound it to alert a pedestrian |
Answer: | I have the pro FXT ranch edition and it works just fine |
Question: | How do i get my alarm to turn off if i lost my keyfob |
Answer: | I would have to assume so I used it on my Kawasaki Mule even though it is a Yamaha part and it plugged right in. |
Product features
vibration sensor alarm
A light touch on a bicycle or door or window triggers an alarm.
It can be used as touch alarm, glass break sensor alarm,prevent intruders and robberies.
Updated remote
Arm key: Press it once, host alarm will go into "Arm mode", 5s later, alarm will ring "Bi". Alarm will be triggered and ring if a vibration or shake is detected.
Disarm key: Under "Arm mode", press this key, alarm will drop out "Arm mode" and return to "standby mode".even if the host alarm is triggered, the alarm sound will stop at once when you press this key.
Tone Selected: Press this key to select ringtone, 6 voice are available.
Vehicle Finder: alarm will ring the selected ringtone if you press this key, so it's easy to find your bicycle.
adjusting touch sensitivity
Long press disarm key of the remote until the LED light of remote long bright, then press arm key, the sensitivity will adjust from high level to low level.
There are 7 different kinds of tones (do re mi fa sol la si ) corresponding to different sensitivity levels. "Do" is the highest sensitivity level.
traditional vehicle alarm
Traditional vehicle alarms require a lot of wiring and accessories, which is time-consuming and laborious.
installation diagram
As a bicycle alarm, it can be installed under the seat cushion or on the frame.
package and install tool
Two zip ties for installing motorcycle alarm and two double-sided tapes were randomly presented, as well as screwdrivers and pry open case for replacing batteries.
second remote ASIN: B084VTYF51
installation method and location
Tie your bike by the strap through the holes or paste the back of the alarm with double-sided sticker to your bike.
Product description
😊Remote control Learning Code
The first remote control code learning method: At first,
remove the host batteries and install back after 30 seconds.
Long press remote control [Vehicle Finder ] key to enter the
code learning mode. After the host produces once “Bi” sound,
press ARM or DISARM key with twice “Bi..Bi..”sound, you should
able to use new added remote control already.
- 👉【Applicable Onvian Alarm B08BYH2LBP】Remoter controller for Onvian motorbike/bicycle anti-fheft alarm ( Asin: B08BYH2LBP/B07MFBV7TW )
- 👉【Remote Control】Wireless remote control operation, remote control range up to 20M/66FT.
- 👉【With Battery】The controller need a CR2032 (3V) button battery ( included ).
- 👉【IPX5 Waterproof】The remote controller designed with IPX5 waterproof function, it can be used in any weather day.
- 👉【Durable Battery】Durable & power low-consumption design, battery life over 1 year(Assume: 5 times usage/day), dimensions: 2.56*1.38*0.59 inch.
User questions & answers
Question: | Will this work on any alarm |
Answer: | Hi my friend, It depends on what speed you have it on. Overall, it is quiet. Have fun. |
- 【Multipurpose Bike Alarm】Act as a great bike theft deterrent. Vibrationaly triggered alarm suitable for bicycle, motorcycle, electric bike, electric scooter and so on. You can also use for doors and windows alarm vibration sensors.
- 【Super Sensitive to Motion】7 level adjustable sensitivity from gently touch to push or beat, you can easily set it according to your need. Wireless remote control operation, remote control range up to 20M/66FT.
- 【Extremely Loud 113dB】Onvian bike security alarm can make a loud sound to draw people's attention. 113dB Loud can effectively scare thieves away, can also be used as SOS emergency alarm.
- 【Easy Installation and Waterproof】This motorcycle bicycle burglar alarm Installation by pasting with double-sided sticker or tieing it with strap. No wiring, no screw. Water resistant rated to IP55 - Can use for outdoor.
- 【Mini Size】3.7"*1.6"*0.8" exquisite and compact design, easy to hide and install, 3 kinds bell sound can operate by remote control, easy to find the vehicles position.
User questions & answers
Question: | How loud is this. Would you hear it inside a closed windowed house a 6 feet away |
Answer: | It is supposed to be around 113db, but every now and then, I pull out my remote to arm/disarm it and I am "lucky" to hear it activate from about 10 feet away. It has become a running joke for some "brain dead" individuals to often knock it over on its side! The bad actors don't appear to be bothered by the racket, but I have run into one person who takes his own chances setting it back upright. He told me that he worried that he might be hassled by the police for doing the right thing! I just told him Thank You to him! Park it as close to your home as you can, be sure to have open windows! Was this of any use for you? YW. |
Question: | How can I synchronize 3 alarms to function with the same remote |
Answer: | Sorry, it can not support the function. It just support 1 alarm to pair up to 8 remotes. |
Question: | how long does battery last if not triggered but set every night |
Answer: | 6 months for the alarm. The remote battery is still good after 6 months. |
Question: | How could the alarm be triggered? If the alarm is triggered, does it automatically turn off after a certain time |
Answer: | Alarm is triggered by motion / vibrations. If u move what ever you have it attached to it'll give you a warning alarm 2 seconds, if it still detects touch or knock in next 2-12 seconds, it will alarm 30 seconds |
Product features
Onvian 113dB Wireless Anti-Theft Motorcycle Bicycle Vibration Alarm Waterproof Bike Security Alarm with Remote
Specifications:
- An alarm need 3 AAA alkaline batteries ( included ) standby for 6-10 months
- A remote need a CR2032 button battery ( included ) standby for over 1 year
- Wireless range: 10-20 meters
- Working environment temperature: -20~60 degree
- Working environment: <80%
- Storage temperature: -30~70 degree
Features:
- Arming and Disarming
- Adjusting Touch Sensitivity
- 3 Levels Adjustable Volume
- 3 Ringtones for Your Choice
- SOS Functions
- Battery Low Indicate (Longer stanby time)
- Wireless Remote
Adjust 7 level touch sensitivity
Long press disarm key of the remote until the LED light of remote long brights, then press arm key, the sensitivity will adjust from high level to low level
There are 7 different kinds of tones (do re mi fa sol la si ) corresponding to different sensitivity levels. "Do" is the highest sensitivity level
Remote control operation
Arm: Press it once, host alarm will go into "Arm mode", 5s later, alarm will ring "Bi". Alarm will be triggered and ring if a vibration or shake is detected.
Disarm: Under "Arm mode", press this key, alarm will drop out "Arm mode" and return to "standby mode".
Even if the host alarm is triggered, the alarm sound will stop at once when you press this key.
Tone Selected: Press this key to select ringtone, 3 voice are available.
Vehicle Finder: Alarm will ring the selected ringtone if you press this key, so it's easy to find your bicycle.
Wide Application
Vibrationaly triggered alarm suitable for bicyle/ e-bike/ motorcycles/ self baslancing scooter, door and winodow.
Pair up to 8 Remotes at Max
Press disarm key of the first remote, then long press the ringtone key. After the alarm sounds “Bi”, press the arm key of the new remote, the alarm will sound“Bi..Bi”. Done.
Small Size
3.7"*1.6"*0.8" exquisite and compact design, easy to hide and install, easy to find the vehicles position.
Product description
Specification:
Color: Black (The cables are colorful)
Size:The high power siren device: 6.0 x 4.9 x 2.6cm
Built-in Shock Sensor: 6.4 x 6.0 x 1.8cm
Netweight:187g
Working power:9-15V
Working current:<500MA
Alarm decibel:105-125dB
Working frequency:315-316MHZ
Compatible Models:
Suzuki, Honda, Yamaha, Kawasaki, Harley Davidson and all Other Motorcycles
How to use:
The installing way:
The Red wire: connects the anode of the storage battery.
The Black wire: connect the cathode of the storage battery (Ground)
The two Yellow wires: separately connect them with the Left/Right turn light's control line (generally, baby blue and orange)
The Pink wire and Gray wire control the flameout of motorcycle. You can cut off the original flameout cable of motorcycle; connect the Pink wire to the top of the original flameout cable and the Gray wire to the bottom of the original flameout cable.
The Orange wire is connected to the anode cable of the electric door or the anode cable of brake switch.
The Blue wire is forward start cable which is generally connected to the yellowish red wire of starting relay
Note:
This kind of wiring way is generally suitable for the motorcycle with AC ignition. The different motorcycle has different ignition mode and the wiring way is possibly different.
What is included:
1 x Connection cables
2 x Remote Controllers
1 x High Power Siren (105-125dB)
1 x Foam glue for High Power Siren
1 x Brain Module System Built-in Shock Sensor
1 x Foam glue for Brain Module System Built-in Shock Sensor
- 1.Work with any motorcycle with 12 Volt batteries.
- 2.This electronic Anti-theft Alarm with remote controller can let your motorbike keep away from thieves.
- 3.Automatic remote engine start; Adjustable Shock Sensor.
- 4.Remote Arming/Disarming (Flashing lights warning/105-125db powerful siren warning).
- 5.Emergency alarm: Anti-Hijacking by Cutting off Power Supply.
User questions & answers
Question: | how to stop chimes when locking & unlocking |
Answer: | Yes, but only a set. |
Question: | Que tiempo de vida tiene la bateria del mando y donde la puedo conseguir |
Answer: | There is no phone app to let you know that the alarm is going off. You can hear the alarm if you're outside but if you are inside your home you probably will not hear the alarm going off. |
Question: | I have an older version that came with my bike... how or why is this one labeled "upgraded |
Answer: | It should work on any vented disc brake |
Question: | Can someone please share the steps to change the sensitivity of theft alarm- I lost the instruction manual |
Answer: | As long as your bike has brake rotors it ought to work fine... |
- [Multipurpose Bike Alarm]Motion sensor bike alarm has great bike anti-theft function. Vibration trigger alarm is very suitable for bicycle, motorcycle, electric bike, electric scooter and so on. You can also install a vibration alarm for your door or window, which will trigger the alarm when someone tries to open it.
- [7 Levels Adjustable Sensitivity and SOS Emergency Alarm ]The 7 levels of sensitivity adjustable from gently touch to push or beat, you can be easily set according to your needs. This bicycle burglar alarm also has SOS emergency alarm.
- [3 Levels Adjustable Volume and IP55 Waterproof] Motorcycle bicycle anti-theft alarm has up to 113lb LOUD alarm, scare off potential thieves effectively and attract people's attention. it also has a three-level volume adjustment function, so you don't have to worry about the volume being extremely loud or not loud. IP55 waterproof, very suitable for outdoor use.
- [Wireless Remote Control ] SuperInk bike security alarm wireless control by remote, strong wireless range up to 20M/66FT. Vehicle search function, easy to find your vehicles in parking lot, 3 kinds of bells for your choice(Not available in ARM mode).
- [Easy to Install & Use]The bike vibration alarm come with double-sided sticker and strap, which can be installed by pasting or tieing. No screws or wiring are required. The 3.7" * 1.6" * 0.8" exquisite and compact design is easy to hide and install.
User questions & answers
Question: | Can it be used to alert someone you are aproaching |
Answer: | Sorry, it can't. Only vibration will trigger the alarm. If you need item use to alert someone when aproaching, you can order these alarm. ASIN: B0799KJVW8/ B07CNZNTHK |
Question: | Instructions say do not attach near metal but the picture shows it attached to metal seat post |
Answer: | Instructions reminds not install the bike alarm in an enclosed space surrounded by metal on all sides, it will definitely affect the remote control effect in a metal box. It not mean do not attach near metal,it can attached to metal seat post. |
Question: | Will one remote control, handle the functions for two or more alarms |
Answer: | Per section 2.2.5.2 of the instructions, an alarm can be paired with a second remote. However, some people have reported problems doing this. It's possible radio signals from other devices that occur during the remote/alarm pairing process may interfere with the pairing. You may need to move away from other possible sources of strong signals at least WHILE you perform the pairing. This may include things like WiFi routers, cellphone, computer with WiFi/Bluetooth, and so on. It MAY even be possible for a second alarm unit to interfere with the pairing if like me, you bought this 2 alarm+2 remotes package deal. I don't know exactly how these devices "talk" to each other so if the second remote was already paired with a second alarm unit...and the second alarm unit is nearby it may try to respond to the second remote while you are trying to pair the second remote with the first alarm unit. In this case, instead of moving away from the second alarm unit, it could be easier to simply remove the batteries from the second alarm unit unless or until you have use for it. |
Question: | If I need more remotes in case I lose one or need to give to family member - where can I buy extra remotes only |
Answer: | You can purchase the remote separately, ASIN: B08CRV1N7K |
Product features
SuperInk Wireless Motorcycle Bike Anti-Theft Burglar Vibration Security Alarm Waterproof Adjustable Volum Super Loud 113dB Remote Control Bell
- Features:
- Adjustable Volum from 96dB, 105 dB to 113dB,detering thieves effectively.
- 7 level djustable sensitivity from gently touch to push or beat, suitable for more application.
- Vehicle search function,easy to find your vehicles by 6 kinds of bells
- SOS function ,it can sound SOS remind other for help when the accident was happened.
- Battery low indicate
Specification
- An alarm need 3 AAA alkaline batteries ( included ); A remote need a 12V/27A alkaline battery ( included )
- Noted: There are the test battery, it may not have a lot of power, please replace it with a new battery when it is used up.
- Remote wireless range: up to 66 ft (20 meters) IP55 Waterproof PC material shell, suitable for outdoor.
- Working environment temperature: -20~60℃, Working environment: <80%, Storage temperature: -30~70℃
Latest Reviews
View all
Micro Sdxcs
- Updated: 06.07.2023
- Read reviews

Flea Treatments For Dogs
- Updated: 20.07.2023
- Read reviews

Nutro Puppy Foods
- Updated: 20.07.2023
- Read reviews

Pocket Sharpening Stone
- Updated: 26.03.2023
- Read reviews

Clarion Marine Radios
- Updated: 30.06.2023
- Read reviews