10 best tripod lens mount rings

Product description

iShoot Lens Tripod Mount Ring for Sony FE 24-240mm f/3.5-6.3 OSS and other lens (see the below description),

CNC Machined Lens Collar Support Bracket Holder, Bottom is ARCA Fit Quick Release Plate for Tripod Ball Head ARCA-SWISS Type

Main features:

1. The lens support adopts lightweight design of hollow, with stainless steel screw, net weight is about 155g; positioning by the switch and bayonet. Cannot be rotated. All corners are grinding rounded, the inner diameter of the tripod ring is about 61.5mm, the width is about 18mm, with 3M film inside for protecting the lens from scratches;



2. The bottom of the lens bracket is 55mm detachable lengthening quick release plate, with 1/4? and 3/8? screw holes and stainless-steel anti-slip screws at the bottom;



Suitable for Sony Lens:

E 10-18mm F4 OSS (SEL1018)

FE 12-24mm F4 G (SEL1224G)

FE 16-35mm F4 ZA OSS (SEL1635Z)

FE 16-35mm F2.8 GM (SEL1635GM)

FE 16-70mm F4 ZA OSS (SEL1670Z) 

E PZ 18-105mm F4 G OSS (SELP18105G)

E 18-135mm F3.5-5.6 OSS (SEL18135)

FE 24mm F1.4 GM (SEL24F14GM)

FE 24-70mm F4 ZA OSS (SEL2470Z)

FE 24-70mm F2.8 GM (SEL2470GM)

FE 24-105mm F4 G OSS (SEL24105G)

FE 24-240mm F3.5-6.3 OSS (SEL24240)

FE 28-70mm F3.5-5.6 OSS (SEL2870)

FE 35mm F1.4 ZA (SEL35F14Z)

FE 50mm F1.4 ZA (SEL50F14Z)

FE 50mm F2.8 Macro (SEL50M28)

FE 85mm F1.4 GM (SEL85F14GM)

FE 85mm F1.8 (SEL85F18)

FE 90mm F2.8 Macro G OSS (SEL90M28G)

FE 100mm F2.8 STF GM OSS (SEL100F28GM)



Package Includes:

1 x iShoot Tripod Mount Ring IS-S24240FE

Note: The other items in the photos not listed here are for illustrating only, not included.

• This lens collar is tailor-made for Sony FE 24-240mm f/3.5-6.3 OSS and other lens (see the below description); the tripod mount ring is referencing to the lenses, quick release plate feature is added to the bottom, more practical than similar lens collar;
• The lens support adopts lightweight design of hollow, with stainless steel screw, net weight is about 155g; positioning by the switch and bayonet. Cannot be rotated. All corners are grinding rounded, the inner diameter of the tripod ring is about 61.5mm, the width is about 18mm, with 3M film inside for protecting the lens from scratches;
• The bottom of the lens bracket is 55mm detachable lengthening quick release plate, with 1/4? and 3/8? screw holes and stainless-steel anti-slip screws at the bottom;
• The tripod collar mount ring is made of high quality Aviation Aluminum, lightweight and solid; precisely machined by world-class high-end CNC turning center, surface anodic oxidation; appearance and exquisite workmanship is much better than similar products made by mold;
• This lens holder bottom Quick Release Plate is 39mm Arca-Swiss fit, compatible with RRS / ARCA-SWISS / PMG / WIMBERLEY / MARKINS / PHOTOCLAM / SUNWAYFOTO / BENRO / SIRUI / MARSACE / ISHOOT ball head of Arca 39mm fit, suitable for iShoot IS-JZ30 / IS-JZ50 / IS-JZ64 / IS-QJ58 / IS-QJ64-FD / IS-JZ60BK / IS-JZ70MFT / IS-JZ80BK.

User questions & answers

Question:	Is there a quick release plate that works with the ring? Mine is a universal quick release plate but it doesn’t seem to fit with the ring
Answer:	Sorry, this lens is specially designed for Canon EF 70-200mm f/4L is II USM Lens

Product description

Main Features:

1. The tripod mount ring is tailor-made for Canon EF 100mm f/2.8L Macro IS USM Lens; Can't be used with Canon EF 100mm f/2.8 USM Macro Lens. Adopt original factory standard, split structure. It is redesigned and produced by use new material and technology based the old version tripod ring TMR;



2. The inner diameter of this tripod ring is about 68mm. The surface contacting the lens is affixed with thicken flocking, the width of this contact surface is 18mm; net weight is about 142g;



3. The tripod collar bottom is added 55mm long Arca fit quick release plate feature, can be used with 39mm Arca-swiss fit tripod ball head, panoramic head and clamp directly; more practical than lens collars without QR-Plate; also reserved 1/4" screw holes and stainless-steel anti-slip screw for fixing lens to tripod directly;



4. The tripod collar mount ring is made of high quality Aviation Aluminum, lightweight and solid; precisely machined by world-class high-end CNC turning center, surface anodic oxidation; appearance and exquisite workmanship is much better than its old version and the similar products made by mold;



5. This lens support bottom is added Quick Release Plate feature of 39mm Arca-Swiss fit, compatible with RRS / ARCA-SWISS / PMG / WIMBERLEY / MARKINS / PHOTOCLAM / SUNWAYFOTO / BENRO / SIRUI / MARSACE / ISHOOT ball head of Arca 39mm fit, suitable for iShoot IS-JZ30 / IS-JZ50 / IS-JZ64 / IS-QJ58 / IS-QJ64-FD / IS-JZ60BK / IS-JZ70MFT / IS-JZ80BK.



Compatible with:

Canon EF 100mm f/2.8L IS USM Macro Lens

(Note: Can't be used with Canon EF 100mm f/2.8 USM Macro Lens)



Package Includes:

1 x iShoot Tripod Mount Ring IS-C100L Compatible with Canon EF 100mm f/2.8L Macro IS USM Lens

 

• The tripod mount ring is tailor-made for Canon EF 100mm f/2.8L Macro IS USM Lens; Can't be used with Canon EF 100mm f/2.8 USM Macro Lens. Adopt original factory standard, split structure. It is redesigned and produced by use new material and technology based the old version tripod ring TMR;
• The inner diameter of this tripod ring is about 68mm. The surface contacting the lens is affixed with thicken flocking, the width of this contact surface is 18mm; net weight is about 142g;
• The tripod collar bottom is added 55mm long Arca fit quick release plate feature, can be used with 39mm Arca-swiss fit tripod ball head, panoramic head and clamp directly; more practical than lens collars without QR-Plate; also reserved 1/4" screw holes and stainless-steel anti-slip screw for fixing lens to tripod directly;
• The tripod collar mount ring is made of high quality Aviation Aluminum, lightweight and solid; precisely machined by world-class high-end CNC turning center, surface anodic oxidation; appearance and exquisite workmanship is much better than its old version and the similar products made by mold;
• This lens support bottom is added Quick Release Plate feature of 39mm Arca-Swiss fit, compatible with RRS / ARCA-SWISS / PMG / WIMBERLEY / MARKINS / PHOTOCLAM / SUNWAYFOTO / BENRO / SIRUI / MARSACE / ISHOOT ball head of Arca 39mm fit, suitable for iShoot IS-JZ30 / IS-JZ50 / IS-JZ64 / IS-QJ58 / IS-QJ64-FD / IS-JZ60BK / IS-JZ70MFT / IS-JZ80BK.

Product description

The LMR-SM140S Tripod Mount Ring from Haoge is designed for Sigma 100-400mm F5-6.3 DG DN OS;Art 105mm F1.4 DG HSM Lens (Sony E mount Leica L mount). It features Arca-compatible dovetail which allow you attach your lens to Ball Head, Clamp or Panorama Head of Arca-Swiss standard. Reserved 1/4" and 3/8" screw holes at the bottom for attach lens to tripod directly. Built-in strap hole for carry.



Quick Release System

Designed with Arca-compatible dovetail, photographer could set up camera and lens quickly.



Improves Lens Balance

The ring secures your lens to the camera's tripod.



Thumbscrews Tighten And Loosen Ring

Having thumbscrews control the ring make it easy to adjust the tripod ring on the go.



Gives Your Camera Setup Better Balance

The ring adds stability to your camera and lens. Due to its weight, when the lens is mounted with a camera on a tripod, the center of gravity is shifted to the lens. The ring attaches to the tripod and can be shifted to adjust the balance.



Compatible with:

Sigma 100-400mm F5-6.3 DG DN OS;Art 105mm F1.4 DG HSM Lens

( Note: it can't be used for other lenses )



Package Included:

1 x Haoge LMR-SM140S Tripod Mount Ring for Sigma 100-400mm F5-6.3 DG DN OS (of sony E-Mount or L-Mount), Art 105mm F1.4 DG HSM Lens

• The LMR-SM140S Tripod Mount Ring from Haoge is designed for Sigma 100-400mm F5-6.3 DG DN OS Lens (of E-Mount or L-Mount)
• It features Arca-compatible dovetail which allow you attach your lens to Ball Head, Clamp or Panorama Head of Arca-Swiss standard.
• Reserved 1/4" and 3/8" screw holes at the bottom for attach lens to tripod directly.Built-in strap hole for carry.
• replace : Sigma TS-111 tripod mount ring
• Compatible with: Sigma 100-400mm F5-6.3 DG DN OS Lens ,Art 105mm F1.4 DG HSM (Note: it can't be used for Sigma 100-400mm f/5-6.3 DG OS HSM of Canon or Nikon mount)

User questions & answers

Question:	Will this work with
Answer:	No. The hood screws onto the outside of the lens. Filters screw on to the lens the same way, with or without a hood. Be careful - this hood is for the IS II version of this lens, which takes a 72 mm filter. If you have 67 mm filters, I suspect you have the older version of the lens wh9ich takes 67 mm filters and requires a different (ET74) hood: https://www.amazon.com/Professional-LH74T-Flower-70-200mm-Replaces/dp/B0097CZH1O/ref=pd_bp_sim_b2b_2/141-1397746-8106111?_encoding=UTF8&pd_rd_i=B0097CZH1O&pd_rd_r=76bc1e3f-5228-4a25-a726-aebd1029f869&pd_rd_w=Aq2wD&pd_rd_wg=MKaCn&pf_rd_p=bdb5d774-733c-4f04-8009-80f934b6d9ff&pf_rd_r=482KSGW8KZB1NEQVPF06&psc=1&refRID=482KSGW8KZB1NEQVPF06
Question:	Does this allow lens to be rotated into portrait mode
Answer:	It fits the 70-200 perfectly....haven’t had any issues. Don’t know the diameter....
Question:	Do you make a tripod collar for a 50-200 Olympus
Answer:	Hi, this mount ring is designed for Canon EF 70-200mm f/4L is II USM or EF 70-200mm f/4L & EF 70-200mm f/4L is. There is no your model lens for checking, so we're not sure if it can fit your lens. Sorry about that!

Product description

The JJC TR-1II Tripod Mount Ring is specially designed for select Canon lenses. The ring is secured around your lens and can be attached to a tripod or monopod via the 1/4"-20 tripod socket on the bottom. It can provide greater stability and balance when working with the heavy tele lens and shooting at the top of your tripod or monopod. Made of premium ABS material, this Tripod Mount Ring is sturdy and durable. The silicone pad on the inside also can protect your lens from unwanted scratches. JJC TR-1II replaces Canon A-2 and AII (WII) Tripod Mount Ring.



Compatibility

Canon EF 70-200mm f/4L IS II USM

Canon EF 70-200mm f/4L

Canon EF 70-200mm f/4L IS



Specification

Materials: Premium ABS

Net Weight: 3.5 ounces

Item Size: 3.5x2.8x4.5

Color: White



Warranty

1-year 100% Satisfaction Guarantee



The camera and lens are excluded.

• Compatibility: The tripod mount ring is designed for Canon EF 70-200mm f/4L IS II USM, EF 70-200mm f/4L & EF 70-200mm f/4L IS
• Replacement: To replace Canon tripod mount ring A-2. Made of durable ABS materials
• Professional Design: The Locking Knob for securing the lens tightly. And the Interior surface with silicone pad will not scratch the lens
• Function: With 1/4-20 tripod socket, mounts the lens to a tripod, and achieve better balancing on the tripod
• Flexibility: Rotating the camera will be much easier and faster

User questions & answers

Question:	Will this work with the 70-200 f/2.8 is ii
Answer:	The Baby-Tremor is a BEAST!!!! You will just need a Mixer, Mic, and Source to play the music (ie: cd player, phone, etc). The AMP on the Baby-Tremor is very effective and powerful. I have 2 and have used both 12"s and/or 15"s with them. James "DJ JC"
Question:	Will the threads on this hood accept a 67mm filter
Answer:	Using an XLR Cable, connected from the Line Input on the Seismic Audio Powered Sub you will connect that to the Line Output on your Powered Speakers (daisy chain). This will only work with Powered Speakers. Although you can run non-powered speakers through the "Satellite Output" on the Seismic Audio Sub if you are running a mixer through the Line Input on the Seismic Audio Sub. DJ JC
Question:	What is the inside diameter of the lens collar
Answer:	Hi Knebb,You could put casters on the Baby Tremor PW subwoofer. However, you would need to consider a few things before you install them. First, I would recommend installing all locking casters, as the sub will be vibrating when in use, and you do not want the casters rattling. Second, you must consider which "face" of the sub to install them on. I wouldn't necessarily install them on the bottom, as you want the sub to make contact with the floor as much as possible. If you can manage these potential issues, then you can install some casters onto your Baby Tremor PW. That said, it would probably be easier to move them with a hand truck or dolly. Also consider, modifying the Baby Tremor PW cabinets in this manner will likely void the 1 Year Manufacturer's Warranty.Thanks,Rusty
Question:	inside diameter? I got 3 inch diameter ( 76.2mm ) tamron 70-300 telephoto lens. We know this ring will not only fit those canon lens but other too
Answer:	Hi,Thanks for your interest in Seismic Audio and our selection of Pro Audio gear! Yes, the Baby Tremor PW 15" powered subwoofer would be a great addition to your DJ rig. These Baby Tremor PW will certainly provide the low end bass that your main speakers do not. It would be ideal to try and run a pair of these Baby Tremor PW, to match your pair of Main speakers. This way you can cover more area with the subs, and you would tax each sub less, and it would be a better balance of sound overall. The easiest way to connect these Baby Tremor PW would be to output from your Pioneer DDJ-SX MASTER OUT XLR Left and Right and input into the Baby Tremor PW's Left and Right XLR-1/4" combination input jacks. Then you can output from the Left and Right XLR male jacks up to your Left and Right Main speakers. If you go with a pair of these Baby Tremor PW, you can output from the DJ controller and input into the first Baby Tremor PW Left and Right, then chain over to the next Baby Tremor PW, then output from this 2nd Baby Tremor PW and input into your Left and Right Main speakers. Let us know if you have any questions.Thanks,Rusty
Question:	i want to use this for my wedding. i have the powered baby tremor sub and two satellites; what else do i need to have music and pa system
Answer:	Hello. The Really-Mini-Tremor included a power cord, but no audio cables. Have a great day!
Question:	I have the seismic audio - paio15s how would i connect this sub to my powered speakers
Answer:	Unfortunately, not. Only the 15, and 18-inch version have the satellite feature.
Question:	Has anyone tried putting casters on this sub? Would it damage it if I put casters for easier transport
Answer:	Hello, thank you for your interest in the Quake 10. It is 10 1/8" total diameter at the widest point. Have a great day!
Question:	Would this be a good addition for a couple of PYLE PPHP123MU's? Would I go master out from my ddjsx > sub > left and right speaker? 15" or
Answer:	Hello. It sounds like are looking for some "FRFR" speakers for a guitar project. Full Range Flat Response speakers are exactly what these are. I'm sure you see the other comments about how they are being used for PA and monitor systems, because that is what they are designed for. You get no additional breakup from the speaker like with a traditional "guitar" speaker. If you are setting up an amp and speaker "modelling" rig, these speakers have been used for this before and people have liked them. That is a bit of a preference situation though. Feel free to give me a call if you want a break down of how all of the speakers I make perform differently in different situations. Have a great day!! 877-347-6423

Product features

Seismic Audio 15" Powered Subwoofer Cabinet

Our powered 15-inch pro audio subwoofer cabinet delivers the low-end sounds loud and clear with a 15-inch woofer and 300 watts RMS. It doesn't matter if you are doing a DJ gig, a wedding, a church event, or a club gig, these subwoofers will deliver the deep bottom end you want! Great quality powered subs are very hard to find, especially affordably. The Seismic Audio brand was designed to make the professional musician, as well as the musician low on cash sound great. With your purchase, you will receive a powered 15" subwoofer cabinet pictured and described above. So, put it in your cart today and get ready for years of trouble-free, crystal clear sound!

Baby Tremor 15

This listing is for an 15" pro audio powered subwoofer cabinet. You will receive one powered 15" pro audio subwoofer pictured and described above. This high-performance, active subwoofer speaker system was designed with larger PA or DJ settings in mind. The Baby Tremor powered 15" subwoofer cabinet provides the power and performance you need. This powered subwoofer yields powerful deep bass reproduction and tight low end in a compact cabinet. The Seismic Audio brand was designed with the notion that every musician should have access to high-quality pro audio gear affordably.

Back Panel

The Baby Tremor PW rear panel is outfitted with two input/output XLR and 1/4" (monobalanced TRS) combo jacks as well as two power speakon and banana-clip outputs. This sub also has a low-pass filter and separate sub and satellite volume and balance controls, two-channel satellite power output (150 watts peak x2), a clip light and a power light.

Protective Hardware

Heavy-duty, rugged hardware protect our Baby Tremor PW sub cabs with a fully metal grill on front, heavy-duty metal corners, and thick, durable rubber feet. Also, the Baby Tremor PW comes with a pole mount in order to mount main speaker cabs elevated above.

Heavy-Duty Recessed Handles

In order to transport your subwoofers easily, our durable recessed handles on either side do the job. The fact that they're recessed ensure a tight profile and alignment with the sides of each cabinet.

Product description

iShoot Lens Collar Foot Tripod Mount Ring Base IS-THRF680

Compatible with Canon RF 600mm F11 IS STM & RF 800mm F11 IS STM



Bottom is 39mm ARCA Fit Quick Release Plate Feature,

Compatible with Tripod Head & Clamp of 39mm RRS / ARCA-SWISS Fit

Not Suitable for Non-39mm Arca-Swiss Fit Clamp



Main Features:

1. The tripod mount ring support base is tailor-made and compatible with Canon RF 600mm F11 IS STM and Canon RF 800mm F11 IS STM, can't be used for other lenses; the measuring volume of the replacement foot is about 91mm(L) x 38.5mm(W) x 31mm(H) (without screws), and net weight is about 95g; couldn't be put in some camera bag due to size limit;



2. The lens collar foot is made based on the lens structure, the screw holes are precisely coordinated, and the anti-skid positioning pin is designed. It is locked by spring screws, with wavy handles;



3. The lens collar stand foot bottom is added 45mm long Arca fit quick release plate feature, can be used with 39mm Arca-swiss fit tripod ball head, panoramic head and clamp directly; more practical than lens collars without QR-Plate; also reserved 1/4" and 3/8" screw holes and stainless-steel anti-slip screw for fixing lens to tripod directly?



4. The tripod collar foot surface using vibration polishing technology, grinding precision improved, multiple anodized, the fineness and uniformity of the color of the metal surface greatly improved; the appearance and exquisite workmanship is much better than similar products made by mold.



Compatible with:

Canon RF 600mm F11 IS STM

Canon RF 800mm F11 IS STM

Can't be used for other lenses



Package Includes:

1 x iShoot lens collar stand foot IS-THRF680

(Note: The other items in the photos not listed here are for illustrating only, not included)

• 1. The tripod mount ring support foot is tailor-made and compatible with Canon RF 600mm F11 IS STM and Canon RF 800mm F11 IS STM, can't be used for other lenses. The measuring volume of the replacement foot is about 91mm(L) x 38.5mm(W) x 31mm(H) (without screws), and net weight is about 95g; couldn't be put in some camera bag due to size limit;
• 2. The lens collar stand is made based on the lens structure, the screw holes are precisely coordinated, and the anti-skid positioning pin is designed. It is locked by spring screws, with wavy handles;
• 3. The tripod collar stand bottom is added 45mm long Arca fit quick release plate feature, can be used with 39mm Arca-swiss fit tripod ball head, panoramic head and clamp directly; more practical than lens collars without QR-Plate. The Lens collar base bottom reserved 1/4" and 3/8" screw holes and stainless-steel anti-slip screw for fixing lens to tripod directly;
• 4. This lens collar support base bottom's dovetail groove is 39mm Arca-Swiss standard, compatible with RRS / ARCA-SWISS / PMG / WIMBERLEY / MARKINS / PHOTOCLAM / SUNWAYFOTO / BENRO / SIRUI / MARSACE / ISHOOT ball head of Arca 39mm fit, suitable for iShoot IS-JZ30 / IS-JZ50 / IS-JZ64 / IS-QJ58 / IS-QJ64-FD / IS-JZ60BK / IS-JZ70MFT / IS-JZ80BK;
• 5. The tripod mount ring base is made of Aviation Aluminum, precisely machined by world-class high-end CNC turning center, hollow-out weight reduction design, hollowed-out work processed by Multi-Diamond Cutter finely, lightweight and solid, polished and surface anodized finish. The appearance and exquisite workmanship are much better than similar products made by mold.

Product description

Aviation Aluminum Tripod Mount Ring Lens Collar for Canon TS-E 17mm f/4L Tilt-Shift Lens 3553B002 and Canon TS-E 24mm f/3.5L II Tilt-Shift Lens 3552B002,

with Quick Release Plate for Tripod Ball Head





Main Features:

1. The tripod mount ring is made of high quality Aviation Aluminum, precisely machined by world-class high-end CNC turning center, hollow-out weight reduction design, lightweight and solid; surface polished and anodized finish, laser lettering; appearance and exquisite workmanship is much better than similar products made by mold;



2. The tripod collar is customized according to the lens. Cannot be rotated. Accurate shape design, avoided the adjustment knob and the switch of the lens, will not affect the original functions of the lens; strong and sturdy;



3. Multiple rubber sheets are embedded on the contact surface of the lens collar and the lens to protect the lens from wear, the rubber is about 0.5mm higher than the contact surface; with stainless steel screw, net weight is about 195g;



4. The bottom of the lens support is added Arca fit quick release plate, the length of the plate is about 46 mm. 1/4 and 3/8 screw holes, stainless steel anti-slip screws are reserved;



5. This lens holder bottom Quick Release Plate is 39mm Arca-Swiss fit, compatible with RRS / ARCA-SWISS / PMG / WIMBERLEY / MARKINS / PHOTOCLAM / SUNWAYFOTO / BENRO / SIRUI / MARSACE / ISHOOT ball head of Arca 39mm fit, suitable for iShoot IS-JZ30 / IS-JZ50 / IS-JZ64 / IS-QJ58 / IS-QJ64-FD / IS-JZ60BK / IS-JZ70MFT / IS-JZ80BK.





Applicable to:

Canon TS-E 17mm f/4L Tilt-Shift Lens

Canon TS-E 24mm f/3.5L II Tilt-Shift Lens





Package Includes:

1 x iShoot Tripod Mount Ring IS-TS-E1724II

 

• 1. The lens collar is tailor-made for Canon TS-E 17mm f/4L Tilt-Shift Lens and Canon TS-E 24mm f/3.5L II Tilt-Shift Lens, can't be used for other lenses.
• 2. The tripod mount ring is customized according to the lens. Cannot be rotated. Accurate shape design, avoided the adjustment knob and the switch of the lens, will not affect the original functions of the lens; strong and sturdy; net weight is about 195g.
• 3. The tripod collar bottom is added 46mm long Arca fit quick release plate feature, can be used with 39mm Arca-swiss fit tripod ball head, panoramic head and clamp directly; more practical than lens collars without QR-Plate.
• 4. The Lens support bottom reserved 1/4" and 3/8" screw holes and stainless-steel anti-slip screw for fixing lens to tripod directly.
• 5. The tripod ring is made of Aviation Aluminum, CNC precisely machined, hollow-out weight reduction design, polished and surface anodized finish. The appearance and exquisite workmanship are much better than similar products made by mold.

Product description

Specification:

Made by metal with very high quality

The UNC (Unified National Coarse Thread) is 1/4"

Ring diameter: 80mm

Ring thickness: 4.5mm

Color: black

Net Weight: 185g

Package Including:

1 x Lens Tripod Mount Ring For Nikon 80-200mm f/2.8 D

• Suitable for NIKON AF-S 80-200mm f/2.8D F2.8 D Zoom Lens
• The tripod mount ring mount on the tripod, it helps you fix and balance your tele lens which is heavy or long lens hanging off the front of camera.
• Made by metal with high quality and strong building.
• The UNC (Unified National Coarse Thread) is 1/4"
• Ring diameter: 80mm; Ring thickness: 4.5mm; Color: Black

User questions & answers

Question:	Will this focusfoto metal tripod collar mount ring 1/4 for nikon af-s 80-200mm f/2.8d f2.8 zoom lens fit the push pull model
Answer:	As I have written previously when I have been sent a question, Ido not own this bed. I purchased it for someone else who was in need of this type of equiment. That indivudal recently died so I am not in a position to provide any information about this equipment.
Question:	Will this work with a monopod
Answer:	I don't remember if it was rolled or in a flat box, but it is in a plastic enclosure and ready to use. VERY comfortable. I would recommend it for anyone using those HORRIBLE metal cot-type hospital beds that Medicare has delivered!!! They should be ashamed of themselves, giving that to an ill person or one at the end of their life!!!! This mattress makes it so much more comfortable. I saved their mattress and returned it with the bed....BOTH are HORRIBLE!!!
Question:	Will this ring fit one of those cheap 500mm/1000mm f8 telephoto lens
Answer:	It’s a twin
Question:	Would this fit a Nikon p
Answer:	same as an extra long twin

• Replaces Canon A-2 and a II (Wii) compatible with Canon EF 70-200mm f/4L lens Canon EF 70-200mm f/4L is lens Canon EF 70-200mm f/4L is II USM lens
• Silicone pad on the inside Also can protect your Lens from unwanted scratches
• Made of Premium ABS material Sturdy and durable
• Attach to a tripod or monopod via the 1/4"-20 tripod socket on the bottom
• Provide greater stability and balance

User questions & answers

Question:	Will this work for Opteka 500mm-1000mm or 650mm-1300mm lenses
Answer:	From the company.
Question:	Can it fit canon ef 70-200mm f/2.8l is ii usm telephoto zoom lens
Answer:	Our son is a kicker, so pads develop holes near foot of bed every 6-9 mos., whereas a pump lasts us a good 3-4 years. We've ordered a few different brands of each, but not that one. However, in our experience, brands don't seem to matter as long as the pump has the two side-by-side nozzles for attaching the double tube.
Question:	Will this fit the new canon 70-200 f4 is ii
Answer:	Hi Itzel, thank you for your interest in Drive Medical! Yes, this pad will work with either pump # 14002E or 14001E.
Question:	Will this fit my 70-300mm f/4.5-5.6 is usm do lens
Answer:	No. that pump is meant for pad model number 14002E.

Product features

JJC TR-1 Tripod Mount Ring Replaces Canon A-2 and AII (WII)

Compatible with:

Canon EF 70-200mm f/4L lens

Canon EF 70-200mm f/4L IS lens

Canon EF 70-200mm f/4L IS II USM lens

Product description

Tripod Mount Ring, CNC Machined RT-1 Replace Lens Collar for Nikon AF-S 70-200mm f/4G ED VR and Nikon AF-S 300mm f/4E PF ED VR Lens,

Built-in Quick Release Plate for Tripod Ball Head of ARCA-SWISS Fit





Main Features:

1. The lens collar is made of aviation aluminum, CNC precision machining, surface anodized, light weight hollow out design, with stainless steel screw. Net weight is about 160g;



2. Referencing to and modified from Nikon original standard design, structure is enhanced, details are improved, and add the function of quick release plate, more practical;



3. The inner diameter of tripod mount ring is about 68mm, using embedded flocking to increase resistance; with three marks, convenient for lens rotation and alignment; fast spring lock, convenient for quick assembly and disassembly or adjust the composition of camera body; removable quick release plate, reserved 1/4" and 3/8 " screw holes;



4. Quick release plate is AS 39mm standard, compatible with RRS / ARCA-SWISS / KIRK / WIMBERLEY / MARKINS / SUNWAYFOTO / KANGRINPOCHE / BENRO / SIRUI/MARSACE / ISHOOT ball head of Arca 39mm fit, suitable for iShoot IS-JZ30 / IS-JZ50 / IS-JZ64 / IS-QJ58 / IS-QJ64 / IS-JZ60BK / IS-JZ70MFT / IS-JZ80BK.





Applicable to:

Nikon AF-S NIKKOR 300mm f/4E PF ED VR Lens

Nikon AF-S NIKKOR 70-200mm f/4G ED VR Lens





Package Includes:

1 x iShoot Tripod Mount Ring IS-RT1

(The other items in the photos not listed here are for illustrating only, not included)

• The lens support is tailor-made for Nikon AF-S NIKKOR 300mm f/4E PF ED VR Lens and Nikon AF-S NIKKOR 70-200mm f/4G ED VR Lens;
• The lens collar is made of aviation aluminum, CNC precision machining, surface anodized, light weight hollow out design, with stainless steel screw. Net weight is about 160g;
• Referencing to and modified from Nikon original standard design, structure is enhanced, details are improved, and add the function of quick release plate, more practical;
• The inner diameter of tripod mount ring is about 68mm, using embedded flocking to increase resistance; with three marks, convenient for lens rotation and alignment; fast spring lock, convenient for quick assembly and disassembly or adjust the composition of camera body; removable quick release plate, reserved 1/4" and 3/8 " screw holes;
• Quick release plate is AS 39mm standard, compatible with RRS / ARCA-SWISS / KIRK / WIMBERLEY / MARKINS / SUNWAYFOTO / KANGRINPOCHE / BENRO / SIRUI/MARSACE / ISHOOT ball head of Arca 39mm fit, suitable for iShoot IS-JZ30 / IS-JZ50 / IS-JZ64 / IS-QJ58 / IS-QJ64 / IS-JZ60BK / IS-JZ70MFT / IS-JZ80BK.

User questions & answers

Question:	Will this collar fit nikon af-s vr zoom-nikkor 70-300mm f/4.5-5.6g if-ed lens
Answer:	You can have a try.
Question:	Does this fit nikon p
Answer:	YES! My daughter has used this steamer multiple times and makes them better than the restaurants!
Question:	Can you tell me if this fits my nikkor 55-300mm 1:4.5-5.6 g ed
Answer:	I put mine over a pot of boiling water. I can usually steam whatever I'm making in about 15 minuits. It is a bit longer than a microwave might do, but it keeps whatever I'm cooking from turning into a soggy mess.
Question:	Description says improved. How so
Answer:	I prepare a steam bath large enough for this piece to sit down in. Don't fill the bath too full, but something you need to keep checking on so it doesn't run out of water. Then I put my dumplings or pork buns in the top, put on the cover and let it cook. Gives bread items a shiny appearance.

Product description

The LMR-C137 Tripod Mount Ring from Haoge is designed for Canon EF 300mm f/4L IS USM, EF 35-350mm f/3.5-5.6L USM, EF 70-200mm f/2.8L USM, EF 70-200mm f/2.8L IS USM, EF 70-200mm f/2.8L IS II USM, EF 70-200mm f/2.8L IS III USM and EF 100-400mm f/4.5-5.6L IS USM Lens. It features Arca-compatible dovetail which allow you attach your lens to Ball Head, Clamp or Panorama Head of Arca-Swiss standard. Reserved 1/4" and 3/8" screw holes at the bottom for attach lens to tripod directly. Built-in strap hole for carry.



Quick Release System

Designed with Arca-compatible dovetail, photographer could set up camera and lens quickly.



Improves Lens Balance

The ring secures your lens to the camera's tripod.



Thumbscrews Tighten And Loosen Ring

Having thumbscrews control the ring make it easy to adjust the tripod ring on the go.



Gives Your Camera Setup Better Balance

The ring adds stability to your camera and lens. Due to its weight, when the lens is mounted with a camera on a tripod, the center of gravity is shifted to the lens. The ring attaches to the tripod and can be shifted to adjust the balance.



Compatible with:

Canon EF 300mm f/4L IS USM

Canon EF 35-350mm f/3.5-5.6L USM

Canon EF 70-200mm f/2.8L USM

Canon EF 70-200mm f/2.8L IS USM

Canon EF 70-200mm f/2.8L IS II USM

Canon EF 70-200mm f/2.8L IS III USM

Canon EF 100-400mm f/4.5-5.6L IS USM

( Note: it can't be used for other lenses )



Package Included:

1 x Haoge LMR-C137 Tripod Mount Ring for Canon Lens

• Compatible with: Canon EF 300mm f/4L IS USM
• Compatible with: Canon EF 35-350mm f/3.5-5.6L USM
• Compatible with: Canon EF 70-200mm f/2.8L USM & IS & IS II & IS III
• Compatible with: Canon EF 100-400mm f/4.5-5.6L IS USM
• It features Arca-compatible dovetail which allow you attach your lens to Ball Head, Clamp or Panorama Head of Arca-Swiss standard. Reserved 1/4" and 3/8" screw holes at the bottom for attach lens to tripod directly. Built-in strap hole for carry.

User questions & answers

Question:	What is the length of the dovetail plate
Answer:	This does not include the bed frame. The price is for just the alternating pressure mattress.
Question:	Has anyone tried this on the first gen canon 100-400mm f/4.5-5.6 is usm not the is ii usm
Answer:	Unfortunately, I bought the bed for my brother in law and he doesn't live with me so I am unfamiliar with the workings of this bed. My apologies!