10 best mount kit for dell projectors

Product description

QualGear PRO-AV QG-KIT-TA-3IN-B projector mounting kit includes a professional grade QG-PRO-PM-50-B projector mount, QG-PRO-PM-TCA-B truss ceiling adapter, and a QG-PRO-PM-3IN-B 3 inch 1.5-inch NPT threaded pipe in black. Easy installation with color installation manual and presorted hardware. Compatible with 1.5-inch NPT threaded pipe and suitable for mounting to round, square, or rectangular trusses up to 3" wide and 3.5" high. For details about each component of this mounting kit, please look up their model number.

• Suitable for truss ceilings
• 1. 5" Npt thread compatible
• Color installation manual
• Professional quality
• 5 Year limited

User questions & answers

Question:	Will this work with epson 2150 home cinema
Answer:
Question:	Can i mount a nec px750u projector with this bracket
Answer:
Question:	Does this work with a Mitsubishi xd3200u model projector
Answer:
Question:	Can i turn this over and mount it on top of speaker stand pipe
Answer:

Product features

Flat Ceilings

The following models support flat ceilings and installing to wood beams, concrete slabs, and metal beams. They are available in two colors as follows. White: QG-KIT-CA-3IN-W. Black: QG-KIT-CA-3IN-B.

Cathedral / Vaulted / Sloped Ceilings

The following models support angled ceilings and installing to wood beams, concrete slab, and metal beams. They are available in two colors as follows. White: QG-KIT-VA-3IN-W, Black: QG-KIT-VA-3IN-B.

Drop / Suspended Ceilings

The following models support suspended ceilings and installing via steel wire. They are available in White color and two ceiling tile configurations as follows. 2' x 2' Tile: QG-KIT-S2-3IN-W. 6" x 2' Tile: QG-KIT-S-3IN-W.

Truss

The following model supports installing to truss beams. It is available in Black color as follows. Black: QG-KIT-TA-3IN-B.

User questions & answers

Question:	I have a need to mount 10" from the roof. Would this work
Answer:	There were two different answers about how many socks are in the package. How many socks are in the package?
Question:	Will this work for drop ceilings
Answer:	The prices are going up on everything,regardless of better quality or not. I still like my Hanes socks,though. They’re always a comfortable fit and they last longer than other brands I’ve bought in the past. So whether they’re of better quality,I really can’t say. To me they’re still the best socks around for the money.
Question:	How do you know if you need an extension
Answer:	The ones I bought didnot have Hanes written across the bottom. But they are very thin. I don't like the thick ones, living in Houston you don't need them anytime of the year. Plus the thin ones just feel better. Mine came in a three pack.
Question:	I ordered the 2040 instead of the 2045 in error. Will it still fit
Answer:	These are true to size. I would recommend 8 to 12 if you like "loose fitting". I prefer snugger and would go with 5 to 9.

Product features

Aircraft Aluminum Design

• The base plate is made from aircraft grade aluminum.
• It is lightweight and ounce per ounce stronger than steel.
• It is over 3mm thick for extra rigidity.

Easy Installation and Adjustments

• The mount comes Fully Assembled
• There are nylon spacers between the axis movements.  This allows for smooth adjustments.
• The screws tightness is preset at the factory.  This allows for adjustments by aiming the projector and releasing it.  The preset tightness ensures your projector will not drift after you release it.

Aluminum dissipates heat 5X faster than steel

• Our aluminum mounts dissipate heat 5X faster than steel mounts.
• Aluminum runs cool while steel runs hot.
• Our aluminum mounts keep your projector running cool.  This increases the life of the lamp as well as the projector.

Dependable Mounting Solutions

• Proudly Made in the U.S.A.
• Manufacturing projector mounts since 2001
• Overbuilt to ensure a safe, secure and sturdy install.

Quick Detach Easy Adj.

• ​Detaches quickly by removing only one bolt.
• There is only one bolt to tighten, the other 2 axis are preset at the factory.
• Simply aim the projector with you hands and let go.

Rolls Side to Side

• Tilts from side to side

Rotates

• Rotates 360 degrees

Tilt

• Tilts up and down

• NON VESA MONITOR ADAPTER – These adapter arms allow mounting non-VESA monitors to VESA monitor mount desk and wall mounts. Designed to fit any VESA monitor mount with 75x75 and 100x100mm mounting holes, and includes all required screws and other hardware for assembly
• UNIVERSAL VESA MOUNT KIT – Designed for Dell, Samsung, HP, Acer, Asus, AOC, Viewsonic monitors that do not have a standard bolt hole pattern. Adjustable monitor arm adapters can be placed in many positions to accommodate varying sizes and shapes of monitors
• WIDE COMPATIBILITY - Fits screen thickness of 1 inch to 2.75 inches and bezel height from 10.5 inches to 16.25 inches. Arms can be rotated up and down to adapt to different monitor sizes. NOT RECOMMENDED FOR CURVED MONITORS
• HEAVY-DUTY - Powder coated steel design is heavy duty and can carry up to 17.6 Lb monitors. Attach this well constructed monitor mount kit to your current VESA mount to securely hold your non-vesa monitor
• EASY INSTALLATION - Includes all required screws and other hardware for easy assembly. Attach these non VESA monitor arms to your current VESA monitor mount and improve your workspace and get back to work in no time.

User questions & answers

Question:	Will this fit a monitor with the outside measurements of 20" x 12" x
Answer:	Six pair but I agree with Bonnie S. ...they are quite tight on the calves. My calves aren’t super thick (14 1/2” at the thickest) but these really cut in. Disappointing as I’ve worn Hanes socks for a looooong time.
Question:	Will this fit a 21.5" Apple iMac
Answer:	They are paper thin. 70% poly and 27% cotton. They advertised it backwards. The fit was fine though
Question:	I have a rca tv and its vesa mount is 100x75mm. i bought a mount that supports 75x75 or 100x100. will this adapter let me mount the tv on the mount
Answer:	Extended sizes are for shoe sizes larger than 9 as I wear a 10 and it helps with the room. If you like to have more room you can still purchase the extended size socks
Question:	Will it work on a vesseless monitor? i have the mx259h
Answer:	20

Product features

Mount-It! VESA Mount Adapter Mounting Kit for Non-VESA Monitors, 13 to 27 Inch LCD LED Screens, VESA 75 and 100 Compatible

Not all monitors on the market come with bolt holes at the back that would allow them to mount VESA compatible monitor desk mounts and stands. These monitors cannot be mounted to an ergonomic desk stand or to a wall, preventing them to be used in cleaner set ups and more productive and ergonomic multi-monitor set ups. No need to worry. Mount-It! VESA Mount Adapter Mounting Kit attaches to your non-VESA monitor and allows it to connect to industry-standard monitor desk mounts and stands.

VESA Mount Compatible

Designed to fit any VESA monitor mount with 75x75mm and 100x100mm mounting holes.

Screen Size

Safely supports most 13 to 27 inches monitors.

Screen Thickness

Adjustable arms securely grips monitors with screen thickness of 1 to 3 inches.

Weight capacity

Constructed of durable steel with maximum loading capacity of 17.6 pounds.

Product description

The Universal Projector Drop-In Ceiling Mount removes the hassle from projector mounting. This patented design replaces a standard 2' × 2' ceiling tile. Installation is easy and takes less than 1 hour! Featuring a reinforced steel plate and cast aluminum mounting head, this lightweight mount can support projectors up to 30 lbs. The mounting head is designed to dissipate heat for longer lamp life. Additionally, the plate includes cutouts and covers for 2 standard outlets for mounting additional equipment or electrical components.

• Load Capacity: 30 lbs (13.61kg)
• Mounting Pattern: Universal Spiral Mount
• Ceiling Plate Size: 2' × 2'
• Rotation: 360°

User questions & answers

Question:	Will this work with the Optoma HD
Answer:	Keep checking online. Got mi e from Amazon be doing multiple searches.
Question:	Will this fit optoma uhd
Answer:	Not sure if they are long enough. But the size is about right.
Question:	Can the mount be moved forward or back on the plate (to adjust the projector distance to the screen)? Or is it in a fixed position
Answer:	This listing is for size large only
Question:	Will this work with the epson powerlite 3020 model, and is the arm a different color then the plate? Im looking for all white
Answer:	Thick! Like a sweat pants material!

Product features

Custom Placement

2' x 2' Reinforced steel lay-in ceiling plate has 5 mounting points for easy adjustment & alignment. Shown in middle placement. Rotate tile and/or use one of the other 4 placement choices. Additionally, the plate includes cutouts for 2 standard outlets for mounting additional equipment or electrical components.

Universal Design

Its unique design, array of drop extensions, and cable management allow the mount to adapt to almost any installation.

Small projectors - use 3 arms instead of 4 provided If mounting points are smaller than universal spider, simply rotate the arm(s) under the universal spider plate.

Large projectors - use 4 arms provided Simply rotate the arms to suit.

Very Large projectors (with mounting points over 12 inches apart) - use the optional extension arms (AMRP10057) to extend the arms from 12 inches up to 15.7 inch reach.

High Quality Engineered

Featuring a reinforced steel plate and cast aluminum mounting head, this lightweight mount can support projectors up to 30 lbs. Its cast aluminum construction provides a strong, lightweight, heat-dissipating platform that is perfectly suited for mounting any A-V projector in a suspended ceiling.

Cable Management

Easy management to ensure that all cables are tucked away for an aesthetic appeal.

Tools and Fitment

​No need to buy extra parts in order to mount your projector! All screws, washers, tools are included in order to ensure perfect fitment.

Flexible Alignment

​180˚ pitch & yaw, 360˚ rotation with lock-down for perfect A-V projector alignment

Includes clips, safety support cable, mounting hardware, and tool kit

2x4 Foot Ceiling Grid

Have a 2x4 foot ceiling grid? Convert it to a 2x2 with our AMRTBAR 2 foot T BAR for suspended ceiling (sold separately)

Optional Poles Adjust

Choose from any extension tube or combination that's right for you. Available in white, silver, and black color variations:

AMRE5003(B) 3" extension

AMRE5006(B) 6" extension

AMRE5012(B) 12" extension

AMRE5024(B) 24" extension

AMRE5048(B) 48" extension

AMREADJ1626(S)(B) 16-26" adjustable extension pole

Tubes allow internal cable management and can be combined to form lengths. eg. 6 inch +12 inch = 18 inch tube.

Product description

This easy to install video projector mount can support up to a 20-pound projector from the T-Bar framing of a suspended drop ceiling. Projector drop from the ceiling is either 10 or 18 inches. It fits all larger projectors with 3 to 4 mounting screw holes weighing up to 20-pounds, but for projectors over 2 pounds, we recommend reinforcing the T-bar frame with a support wire that attaches to the true ceiling; fits Epson, Optoma, Benq, Viewsonic and most other projectors. The maximum spider mount leg span is 12 inches (mount hole to mount hole); angling the legs will slightly reduce maximum leg span. The simple assembly includes all metal parts and a comprehensive kit of assembly screws and hardware. The two axis locking tilt adjust with about 25 degrees pitch makes installation fast and stable. The suspension rod is either 8 or 16 inches long and the mounting bracket is Includes an American written installation manual. Video Projector is not included, it is shown for demonstration purposes. NOT COMPATIBLE WITH ViewSonic PJD7820HD projector.

• Mount fits all larger projectors with 3 to 4 mounting screw holes weighing up to 20-pounds, but for projectors over 2 pounds, we recommend reinforcing the T-bar frame with a support wire that attaches to the true ceiling; fits Epson, Optoma, Benq, Viewsonic and most other projectors
• Easy to install on a drop ceiling with 1 inch wide T-Bar frame, with scissor clamp and two 8 inch aluminum suspension rods; the two axis locking tilt adjust with about 25 degrees pitch makes installation fast and stable. With the typical drop ceiling, a medium to heavy projector a small amount of movement or sway will occur when touching the projector. We recommend using a remote control where possible. Using the included support wire will provide for a very safe install.
• Includes American-written installation manual with illustrations and photos; simple assembly includes all metal parts and comprehensive kit of screws and hardware
• The suspension rod is 8 or 16 inches long and the mount bracket is gunmetal gray; projector drop from the ceiling is either 10 or 20 inches
• Projector is not included, it is shown for demonstration purposes only; includes an installation guide (see link below under "Technical Specification")

User questions & answers

Question:	Can I have the mount with shorter rod ? Instead of 8 up to 16 be 4 up to
Answer:	No Lights Flashing and no noise
Question:	Will this work with Epson powerlite
Answer:	To turn on voice activation... Switch to ON position- hold down the minus button until the light goes out. Switching to On position and holding down the plus button until light goes out would put it in continuous recording.
Question:	Where can someone buy the extension rods that are compatible with this mount
Answer:	This recorder is easy to operate if you refer to instruction carefully
Question:	Will this fit an epson projector? It's the only mount I can find with scissor clamp
Answer:	Yes,it record automatically,but be aware if there are no sounds over 5 seconds,it stop recording until sound again.

Product description

This easy to install video projector mount can support up to a 20-pound projector from the T-Bar framing of a suspended drop ceiling; it fits all larger projectors with 3 to 4 mounting screw holes weighing up to 20-pounds, but for projectors over 2 pounds, we recommend reinforcing the T-bar frame with a support wire that attaches to the true ceiling. The simple assembly includes all metal parts and a kit of assembly screws and hardware. The two axis locking tilt adjust with about 25 degrees pitch makes installation fast and stable. Attaches to your projector with 3 or 4 legs of the gimbal spider mount. The maximum spider mount leg span is 12 inches (mount hole to mount hole); angling the legs will slightly reduce maximum leg span. Typical mounting screws are supplied with this mount but with some projectors, you may need to use the mounting screws included with your projector. Fits Epson, Optoma, Benq, Viewsonic and most other projectors. Projector drop from the ceiling is only 10 inches. Includes an American written installation manual. Accessory 8 inch extension rods can be added to lower the projector. Video Projector is not included, it is shown for demonstration purposes. NOT COMPATIBLE WITH ViewSonic PJD7820HD projector.

• Mount fits all larger projectors with 3 to 4 mounting screw holes weighing up to 20-pounds, but for projectors over 2 pounds, we recommend reinforcing the T-bar frame with a support wire that attaches to the true ceiling; fits Epson, Optoma, Benq, Viewsonic and most other projectors
• Easy to install on a suspended drop ceiling with a 1-inch wide T-Bar frame, with 25 degrees pitch; projector drop from the ceiling is 10 inches, and accessory 8-inch extension rods can be added to lower the projector. With the typical drop ceiling, a medium to heavy projector a small amount of movement or sway will occur when touching the projector. We recommend using a remote control where possible. Using the included support wire will provide for a very safe install
• Includes an AMERICAN WRITTEN installation manual with illustrations and photos
• Includes scissor clamp and one 8 inch aluminum suspension rod, and screws; maximum spider mount leg span is 12 inches, mount hole to mount hole
• Projector is not included; it is shown for demonstration purposes only

User questions & answers

Question:	Does it come with an 8 inch extention rod? Where can I buy them
Answer:	yes
Question:	I really want to buy this product but I need to know if this will fit on an Epson ex
Answer:	Not easily. The 8' drive belt is replaced in the extension kit with a belt for a 9' door. You would have to make other manual changes.
Question:	Can the projector be aligned left or right when mounted
Answer:	If you buy any retail garage door opener you will also need to be sure that there is a compatible 10’ extension kit to lift 10’ of door. My suggestion for this would be a chamberlain belt drive opener with the 10’ extension kit sold separately. B750 is a great model or b970 if you need battery backup. 7 years as garage door tech.
Question:	Is the drop bar adjustable so the device can be pushed up when not in use
Answer:	The tracker will work in any vehicle with an OBD2 port. All vehicles manufactured since 1996 have an OBD port (and some prior to that year).
Question:	Will it fit optoma uhd51a projector
Answer:	hi ,we have not the video,and you can search the steps on google.
Question:	I ordered this thinking i was going to purchase a uhd51 ulv. i have now decided on the benq tk800. will this mount fit non-optoma projectors
Answer:	no
Question:	Will this work with the UHD
Answer:	no ,thanks.
Question:	does this fit the UHD 51a
Answer:	I don’t know it came with a SIM card, first 3 months are free

Product description

Projector ceiling mounts from Projector Ceiling Mounts Direct (PCMD) LLC. offers the consumer a quality ceiling mount at a fraction of the cost of others on the market. This projector ceiling mount can be rotated 360 degrees, and pitched and rolled in any direction; +/- 35 degrees. The mounting plate is CNC machined for precise fitment and made from 6061-T6 aircraft grade aluminum. Unlike universal ceiling mounts, our projector ceiling mounts are specifically designed for your projector. This ensures proper hanging of the projector by utilizing minimal projector coverage as well as leaving adequate space for heat to escape. All the necessary hardware is included to install the ceiling mount onto your drywall ceiling or wooden beam and projector. Detailed instructions are also included for a quick and easy installation. This mount style sets the projector approximately 4 inches from the ceiling.

Not intended for drop/false ceilings

Actual mounting plate may differ from picture

Projector not included

THE PCMD ADVANTAGE:

Customer Service

Have a question? We respond to customer questions promptly and professionally. We strive to make your purchase the easiest it can be.

Made in the USA

Our mounts are proudly designed and manufactured in Ohio.

Industry Leading Warranty

We back up our mounts with a Lifetime Warranty and 100% Money Back Guarantee!

FREE Mount Exchange Program

Buy a new projector? Upgrade your mount for FREE! Our competitor charges their customers "$14.99 + S&H"

S&H:

Orders will be shipped within 24 hours, Monday through Saturday.

RETURN POLICY:

We believe you will be 100% satisfied with the form, fit, and function of your projector ceiling mount that we will extend a LIFETIME WARRANTY on all of our projector ceiling mount kits!

Buyer pays return shipping and is not refundable.

• CNC machined aircraft grade aluminum mounting plate
• Fully adjustable 360 degree swivel mount
• All the necessary hardware included
• Detailed instructions for easy and quick installation
• Sets the projector approximately 4 inches away from the ceiling

User questions & answers

Question:	Will this fit a hime cinema
Answer:	Please check if the frequency of your garage door opener is 310 MHz. If yes, our remote control should work with your model.
Question:	Will this bracket work for the Epson powerlite home cinema
Answer:	No, this remote doesn't work with your opener.
Question:	Will this fits on a powerlite 96w epson
Answer:	Hello there, we recommend you to use this Universal 2-Button Garage Door Remote SM24 (Link: https://www.amazon.com/gp/product/B08RSDQKM9?th=1). Thanks
Question:	Will this mount fit Espon1450 model
Answer:	They work with my 7055's

Product description

The VideoSecu projector ceiling mount is attractive and light weight. Durable black finish comes with the latest design in safety, flexibility and value for many of today's most popular LCD projectors for home or office. This projector mount is weight tested at 22lbs and designed with adjustable arms to fit most projector brands with mounting ranges less than 16". The PJ1B is 5.5 inch height. The mount features include +/-20 degree tilt, 45 degree pan, 90 degree swivel and +/-15 degree roll. How can I determine if this mount will fit my projector? Projectors may have 3 or 4 threaded holes for ceiling mount. First make sure that the projector does not exceed the 22lb weight limit. Next, find out the maximal diagonal of the holes. It should not be over 16". In other words, if the maxim distance of any 2 holes (especially diagonally) is not more than 16", then the mount should fit fine.

• VideoSecu projector mount for flat ceiling and vaulted ceiling
• Steel construction; Maximum loading 22 lbs (10 kgs); The height is 5.5"
• The projector mount can tilt +/-20 degree, pan 45 degree, Swivel 90 degree and roll +/-15 degree
• The Adjustment arm (16 inch Max arm distance) fit most projectors; Easily release and lock
• Standard hardware required to fasten the mount to your ceiling and your projector included

User questions & answers

Question:	Can you use a mini projector on this
Answer:	I am sorry but it will not.
Question:	Will this fit dbpower t
Answer:	The type of ceiling required it
Question:	What is an exact bolt size that holds the projector
Answer:	yes, it will fit.
Question:	Can anyone tell me the dimensions of the bracket that actually screws onto the wall? The flat surface mount part... Thank you
Answer:	Hello, after our inquiry, the frequency of your garage door opener is not in our compatible list, so it should not work with your opener. We suggest you can install a universal radio receiver kit so that you can continue to operate your older model Overhead Door garage door opener with a remote control. Thanks.

• 【UNIVERSALLY COMPATIBLE】 - SCREENPRO ceiling projector mount fits most mainstream home projectors on the market. The adjustable base arms can be extended or retracted from 3.7inch to 13.4inch to can be used in various projector mounting patterns.
• FULL MOTION ADJUSTABLE MOUNT- SCREENPRO ceiling projector mount's retractable aluminum column provides height adjustment for various installation requirements, it can be tilted back and forth by 30 degrees, left and right by 10 degrees, 360 degrees rotation adjustment, hitting all possible viewing angles.
• 【EASY TO INSTALL】- SCREENPRO ceiling projection mount is a quick assembly with common mounting hardware and can be set up in a few steps with quick release hooks that attach and detach by tightening and loosening mounting bolts.(A plier might be used to tighten the knob to fix the angle better)
• 【HEAVY-DUTY CONSTRUCTION】- Made of ThickeningФ45mm steel pipe provide a reliable projector mount, anti-rust and durable, elegant appearance run cable through pipeline by hidden inside with a maximum support of 22 lb.
• 【2-YEAR WARRANTY】- SCREENPRO ceiling projector mount promises 2 years warranty on products and service, Please let us know if you have any problem! We will try our best to serve our dear customers!

User questions & answers

Question:	What are the exact dimensions of the ceiling plate
Answer:	I'm using it on hp's 22". They should do the job just fine once you adjust it. Just keep in mind that this things are made for Non vesa monitors, so that you may mount on a stand or dual stand as the one I use.
Question:	Correct me if I am wrong, but it looks like if you mount it to a sloped/vaulted ceiling, the pole will not be plumb, but rather hang at an angle. Why
Answer:	You typically buy this mount if you don't have any vesa connectors. But, yes this would work to hold your tv as long as it's within the height tolerances. This mount free-holds the whole tv. Good luck. -John.
Question:	What is the distance between the holes on the ceiling mounting plate
Answer:	I'm not sure about the thickness of your monitor but I can tell you that I mounted a 27" HP all-in-one monitor and the mount is very adaptable. It worked great!
Question:	How wide is the projector ceiling mount, not the part that screws into the projector, but the ceiling
Answer:	no, this mount will only lower the projector 5" below the ceiling. We do sell other mounts that come with extension and will lower the projector 10" below the ceiling.

Product description

Low profile universal ceiling mount, fits most Optoma projectors but excludes TX783/TX783L/EX330/EW330/EP7155/TX7155/EP1691. UPC Code: 796435041212. 90-Day Warranty.

• Low Profile Universal Ceiling Mount
• Fits Most Optoma Projectors (Excludes: TX783/TX783L/EX330/EW330/EP7155/TX7155/EP1691)
• Color: White. Load capacity 15kg
• UPC Code: 796435041212
• 90-Day Warranty

User questions & answers

Question:	Does this fit the optoma hd29darbee
Answer:	It has many install options. It should work as long as your unit has 3 or 4 (threaded) screw holes in the bottom
Question:	Does it fit Uhd 60 4K uhd projector
Answer:	we have a choice of 16 and 8 extension rods at Alzo Digital
Question:	Can you provide a picture of this mounted to an optoma hd27? i need to see where the post is located and how the arms are configured
Answer:	Ok here is my experience with this product. Let me preface this by saying that I did return the item. I have an optoma projector which only has 3 mounting holes on the underside. Most have 4 and this product has 4 legs. Each leg is quite customizable (notice I say quite, so not 100% but close. Personally, had some trouble). So if your projector has 4 mounting clamps, it will attach to the underside well. The problem however, is the weight balance. The problem with the scissor clamp is that the frame of the dropped cieling is not very sturdy. It will hold it fine, but if your projector is heavier on one side or if the weight of the projector is not evenly distributed, then the projector will lean on one side as it hangs. Because of that, I returned the product. I ended up removing a square from the dropped cieling, attaching a standard mount to a 2x4 and hanging it through the dropped cieling frame. You can then build the rest of the cieling around it if you wish. There are also other options that will replace an entire panel of the dropped cieling with a mount. So personally, unless you have a perfect balanced projector, from the point of the mount, I wouldn't recommend it. But to answer your question, it will most likely work on an Epson. ...maybe this should've been a review and not an answer
Question:	does this fit a hd26 and close the ceiling is it
Answer:	yes it will i have asus 24 inch fitted