13 best satellite tv splitters

• 1x2 HDMI SPLITTRE DUPLICATE/MIRROR ONLY - Powered HDMI Splitter can distribute one HDMI input signal to two HDMI displays, transmit video and audio simultaneously, no loss, no lag (NOTE: just Duplicate/Mirror screens, Not Extend)(the unit does comes with a USB-micro USB cable, But does not come with a 110v power source)
• PORTABLE - 4K HDMI Splitter 1 in 2 out, size: 2.5x2.1x0.5 inches/ 6.3X5.3X1.2 cm ( L X W X H ), easy to use and carry, travel friendly. USB cable included(it needs to be powered via usb), no need external driver, safety and Eco-friendly (Seller recommend 25ft long hdmi cable(max))
• 4K ULTRA HD RESOLUTION - HDMI Splitter for dual monitor support 4K, 3840x2160p, 3D, and 480i@60Hz/ 480p@60Hz/ 576i@50Hz/ 576p@50Hz/ 720p@50/ 60Hz/ 1080i@50/60Hz/ 1080p@50/60Hz/ 1080P 24Hz 3D/720 60Hz /4K@30HZ [For 4K resolution, the frequency can't above 30Hz].NOTE:Not Compatible With HDCP2.2.
• SUPPORT - 4K HDMI Splitter one input to two outputs support HDMI v1.3/1.4, HDCP compliant ( version 1.2). Support deep color 30 bit/36 bit. Support audio format: DTS-HD/Dobly-true HD/LPCM7.1/DTS/Dobly-AC3/DSD/HD(HBR)
• PACKAGE INCLUDED - 1 * [ 1 in 2 out HDMI Splitter], 1 * [USB cable(usb power adapter not included,Please plug the usb into a wall outlet,not a cable box etc...)],1*High Speed HDMI Cable.

User questions & answers

Question:	Do you need to charge this device
Answer:	I think the question is incorrectly worded. It should have asked "Do you need power this device?" The answer is "Yes". The HDMI Splitter comes with with a USB-micro USB cable but not with a USB power supply. Any old USB-phone charger will do the job.
Question:	I want to connect both my roku and receiver to my tv. is that possible
Answer:	Dear customer, Thankyou for asking question for this 1 hdmi to 2 hdmi adapter for dual monitors. I felt so sorry our product not support connect audio device. It's one hdmi input and two hdmi ouput splitter, it only support you connect one hdmi input source like roku to two TV/Projector/Monitor. Any other problem you have please contact me freely. Thanks
Question:	Is it possible to extend not mirror displays with this device on a pc
Answer:	No, all a "Splitter does is "Mirror" the input into two outputs.
Question:	Hi - Does the cable only mirror screens? Can the cable now show two different images on the different screens
Answer:	Hello customer, Thankyou for asking question on this hdmi 4k splitter. Our hdmi 4k splitter 1 in 2 out will duplicate or "mirror" a single HDMI source on two HDMI displays. Both displays will show the same video and audio simultaneously. Not support extend. Any problem you have please contact us. Thankyou

Product features

Two ouput with same image

HDMI Input compatible with any HDMI device: such as PS4/Roku/Fire TV/Blu-ray players/Apple TV/Xbox/ Nintendo Switch/PS4 Pro/ Xbox 360/ Xbox One X/PS3/Beamer/Laptop and other HDMI signal source.

HDMI Output: Monitor, TV, Projector.(Not support HDMI audio device)

Notes:

1. Only mirror/duplicate screen, not support extend! each screen will shows same pictures.

2. If Your HDMI input device (like XBox one x, PS4 Pro) supports 4K@60hz, please set the resolution to 4K@30Hz or below to make this HDMI splitter work properly.

Plug & Play, Easy to set up

This 4k HDMI splitter is easy to install & operate, Just connect your HDMI devices and the USB charger cable (Does not come with adapter) to enjoy.

Maximum 4K@30hz

Support up to 4k@30hz, HDTV deep color and 3D video are supported as well. You can enjoy high quality movie at home or build your own home theater.

Suit for Various Occasions

Best choice for various occasions. It is ideal for trade show, conference room, bedding room, living room, kitchen room and backyard.

Product description

Expand your entertainment viewing options with the GE-branded Pro™ Digital 2-Way Coax Splitter. Whether you access your entertainment through a TV antenna, cable or satellite subscription or other device, this handy splitter lets you easily deliver the digital signal to multiple TVs for the best in high-definition entertainment. This coax splitter is designed to evenly distribute one digital signal to support TVs, DVRs, Blu-ray™/DVD players, cable boxes and more. It transfers audio and video for all brands of electronics using F-type connectors and is capable of handling frequencies of 5-2500MHz. Installation is easy. Simply use the clearly labelled, screw-on input and output jacks. Screw the coax connector from the signal source that you wish to distribute, such as your TV antenna, cable or satellite connection, onto the coax jack labeled “in” on the splitter. Screw in the coax connectors for the cables running to the TV or other device to any of the coax jacks labeled “out.” The compact design fits easily in tight spaces and integrates seamlessly with existing hardware. Experience greater entertainment with the GE-branded Digital 2-Way Coax Splitter.

• MULTI PURPOSE – This digital coax splitter is designed for use with HD TV signals, Satellite TV, and High Speed Internet Modems as well as Cable TV, Amplified Antennas, Amplifiers, and other coaxial devices.
• FREQUENCY RANGE – Distributes a digital signal of 2.5 GHz (5-2500 MHz) frequency range
• 2 OUTPUTS – Splits a single digital signal to up to 2 devices, balanced, and with power pass through on all ports.
• GOLD PLATED CONNECTORS – Allows for optimal connectivity, corrosion resistance, and compatible with RG59 and RG6 coax cable.
• U.S.-BASED TECHNICAL SUPPORT – Backed by a limited-lifetime replacement pledge and free U.S.-based technical support that is available Monday – Friday, 7AM-8PM, Central Time to assist with any questions or issues.

User questions & answers

Question:	Would this allow inserted dc on one output port for antenna amp to appear on second output port? wouldn't this be dangerous to other connected tvs
Answer:	No. It doesn’t but it does fold in half if that helps.
Question:	Is each OUT port protected by a diode
Answer:	Hi, our beam body is made of wood+high density EVA, and beam lege is made of high density steel, beam leg is all welded, weight capacity for our beam is more than 300lbs. Could i know your gymnastics level? Then we could recommend you the right item. If any questions please let me know, we are all here for you. Marfula Service Team
Question:	does it have a male end
Answer:	hi, this type of balance beam could not be connected, could i know the length you need? then we can customize it for you. As you know, we are factory, design and produce them by ourselves, many gymnastics coach like our gymnastics equipment. If you have any requirement, please feel free to contact us, we will try our best to do the best suitable equipment for you.
Question:	what is the signal loss on this? 3.5 db or 7 db
Answer:	hi, number 6 is tan, it is one popular color for gymnast, and the leg of this type of balance beam is with wheel, move easily.

Product features

GE Digital 2-Way Coaxial Cable Splitter

Distributes a digital signal to multiple TVs

• 1 Input 2 Outputs (balanced)
• Distributes digital signal of 2.5 GHz : 5-2500 MHz
• Power Pass All Ports
• Compatible with RG59 and RG6 coaxial cable
• Gold plated connectors for corrosion resistance

Distribute one signal to two TVs

Compact for easy and out of the way installation

Works with all TVs and TV Antennas - regardless of brand

All RG59 & RG6 Coaxial Cables - all brands

Product description

The Antronix VRA series provides full compatibility with all cable TV services. The VRA900B provides an alternative to the higher priced Electroline FT08300 and PCT VC9U, while providing some additional capabilites that other products cannot provide. The VRA900B provides a full set of 8 amplified output ports. Each port carries the exact same signal level as the input port carries - in both the forward and reverse directions. This unique design makes the VRA900B a true lossless splitter in both directions, allowing you to connect virtually any cable TV device and enjoy worry-free operation. All 8 ports can be used for any type of device including a cable modem. The VRA900B also provides a Modem Bypass port. The bypass port allows you to connect any device to the amplifier (usually a cable modem or VoIP phone device) and insure operation of that device in the event of a power failure.The amplifier is surge protected and waterproof. It also has a unique mounting design that allows the amplifier to be mounted either horizontally or vertically with two separate sets of mounting brackets. This provides you with the best options for mounting the amplifier anywhere inside or outside your home. Supports operation from -40 degrees to +140 degrees Fahrenheit. The amplifier can be powered from any location using an optional (not included) power inserter. Power supply and F59 Terminators are included. Connection cables not included.

• Compare to Electroline EDA-FT08300 or PCT VC9U. Provides 8 amplified output ports with Active Return.All ports are LOSSLESS both forward and reverse. This is a true lossless 8-port splitter.
• MODEM port provides a connection point for VoIP equipment, so that a power failure will not affect services. Compatible with all standard and digital Cable TV services, including the "Triple Play" phone service.
• All models equipped with CamPort auto seizing F-ports.The all ports facing down configuration provides clean wiring in any orientation.
• 6 kV Surge Protection and PTC Short-Circuit Protected UL Listed Adaptor - Unique surge protection provided on all RF ports. Self-resetting circuit protection provides safe protection against short-circuits.
• Powder Coated Aluminum Housing - Provides the most corrosion resistant protection against salt fog and rust. 5-year manufacturer warranty on amplifier only - not power supply. Does not include connection cables. Includes three F59 terminators.

User questions & answers

Question:	May I use this product to split an fm signal from an antennae and send it to my recveivers and equipment which uses a coaxial cable
Answer:	I don't see why not, the fm frequencies use the same antenna as vhf and as long as you have an antenna with that capability I believe so. The splitter/booster just distributes the signal equally between each connection so there is no signal loss from too many splits. Yes,it can be used for this purpose
Question:	If this amp is not compatible with a tv broadcast rf/rx antenna, could you recommend a good one
Answer:	this device is compatible with pretty much all service providers of COAX tv service like comcast, spectrum and verizon
Question:	Can this be mounted outdoors
Answer:	If mounted outdoors it should be in a sheltered, dry location - preferably in a telecom enclosure. The power supply is rated for INDOOR USE ONLY.
Question:	Can two be daisy-chained successfully? I have one already but need more than 8 outlets in my home
Answer:	No. Daisy chaining has a high probability of failure, and is strongly discouraged. If you need more that 8 ports it is better to use a 2-way splitter to feed 2 separate amplifiers.

Product description

Orei HD-102 1x2 HDMI Splitter

This reliable splitter will take any HDMI signal(rev 1.3b) and duplicate the signal, sending the same high definition signal to 2 displays simultaneously. Product Features: -Excellent Quality-The heavy-duty cool metal enclosure protects the insides and keeps the unit cool by aiding in quick heat absorption and dissipation.-2 x HDMI Outputs supporting up to v1.3b and 1440p-1 x HDMI Input supporting up to v1.3b and 1440p-Supported Audio: LPCM,Dolby-AC3, DTS7.1, DSD/Dolby TrueHD/DTS-HD master audio-Essentially all available audio options are supported-Video Format: Deep Color 480i/ 576i/ 480p/ 576p/ 720p/ 1080i/ 1080P/ 1440i/ 1440p-EIDI Duration: 6 seconds Specifications: -Product Type: HDMI 1x2 Splitter-Interface Type: 1 HDMI in, 2 HDMI out-Color: Black-Power Supply: 5V DC USB cable (power adapter not included)-Dimension: 10 X 6.1 X 2.6 cm-Weight: 0.09KG Package included: HDMI 1x2 Splitter x 1-DC power supply to USB cable (adapter not included) x 1 -User Manual x 1 HDCP COMPLIANT - WILL NOT BYPASS HDCP SIGNAL

• THIS UNIT DOES NOT EXTEND MONITORS - ONLY Split one HDMI input signal to two HDMI output signals identical to the input signal
• Fully Compatible with any HDMI 1.4/ 1.3/ 1.2 version, support HDCP 1.4(NOTE: Will Not BYPASS HDCP), Easily Split Signal for devices with standard HDMI interface. Input: Computer, XBox 360, XBox one, PS3, PS4 Pro, Fire Stick, Blu-Ray DVD player, Satellite Receiver, Route Roku, Chromecast, PC, Projectors etc. Output: Apple TV, HD-Ready, Full HsD TVs, HD Monitors, Samsung TV, and more
• Maximum HDMI Cable Use - 30 Feet. For Best Picture quality do not use with cables over 30 Feet. The heavy-duty cool metal enclosure protects the insides and keeps the unit cool by aiding in quick heat absorption and dissipation. Operating temperature is 0°C ~ 40°C / 32°F ~ 104°F
• Full Video format 3D, 4K x 2K@30hz, 1080P @30hz, 1080P @60hz. Deep Color 4K @ 30Hz / 480i/ 576i/ 480p/ 576p/ 720p/ 1080i/ 1080p/ 1440i/ 1440p eidi duration 6 seconds. DOES NOT SUPPORT HDCP 2.0 & 2.2
• Package includes - 1 - 4K 1x2 Splitter, 1 - USB Power Cable, 1 - User Manual (Power Adapter not Required) If you have any questions regarding our splitters please feel free to contact us through support

User questions & answers

Question:	Does this splitter still work to bypass HDCP
Answer:	I don't need to return it, for this reason I don't know
Question:	Is there any audio degradation when using this splitter? Do both signals maintain the same audio quality
Answer:	Yes you can watch 4 tvs at one time with the 1x4
Question:	Will this work while one of the displays is off? (Some other HDMI splitters only work if both displays are on and have the HDMI input selected
Answer:	THis item is splitter, not swither, can not switch different signal to one same display. it only can split onesignal to four same signal at same time.
Question:	My kitchen tv has only one HDMI port. I want to split the signal to a Tivo Roamio and a Roku. Will this do it
Answer:	Some HDMI devices have insufficient current output, please connect Micro USB 5V power supply, and the USB converter current output is greater than 500MA. If you have any doubt or need any assitance, please don't hesitate to contact us.

Product features

1 Input 2 Output

Orei brings you yet another multi-practical accessory for your home or business. The OREI HD-102 HDMI Splitter splits one HDMI input signal to two HDMI output signals identical to the input signal.

Just connect the HDMI splitter to the adapter and connect the HDMI source with the desired TVs. The simple plug and play design requires no additional installations or complications.

Note:

- It will not work with HDMI cables over 30 Feet.

- It will not Extend Monitor Screens

- This unit is not a switcher, it will not let you screen multiple HDMI source on 1 TV

Supports Full HD & 3D

The Orei HDMI splitter is certified to support the transmission of Full HD Video and 3D. This means that you can easily play 3D or Full HD movies from 1 HDMI Source (Blu-ray or PC) to two or more TVs.

Note:

- It will not work with HDMI cables over 30 Feet.

- It will not Extend Monitor Screens

- This unit is not a switcher, it will not let you screen multiple HDMI source on 1 TV

Keeps the HQ sound

Enjoy highest sound quality on both TVs or sound systems as the HDMI splitter Essentially all available audio options are supported. The HDMI splitter supports LPCM, Dolby-AC3, DTS7.1, DSD/Dolby TrueHD/DTS-HD master audio, and similar audio options.

Note:

- It will not work with HDMI cables over 30 Feet.

- It will not Extend Monitor Screens

- This unit is not a switcher, it will not let you screen multiple HDMI source on 1 TV

Full Support

Highly responsive OREI team for any queries you may have. Our high-quality HDMI splitter is backed by full support. Get quality, excellent support, and convenience from a reputable brand.

Note:

- It will not work with HDMI cables over 30 Feet.

- It will not Extend Monitor Screens

- This unit is not a switcher, it will not let you screen multiple HDMI source on 1 TV

Product description

BAMF splitters were designed by 2 cable technicians who were frustrated by the lack of access the general public had to high quality components for their cable setups. BAMF splitters were built to give an improved experience for the end user. Please Read further to see more specific specs! VERY HIGH QUALITY, solid built 2-way coax cable splitter designed for CATV or satellite services. Used frequency spectrum 5-2300 MHz for optimal performance on all devices. Whether you are using cable (internet,TV or phone), satellite TV or antenna system we have you covered. Works great with MoCA systems. Zinc die-cast housing with nickel plating, f-type connector, low insertion loss, high isolation, max passing current 0.5A, DC 24V, multi-outputs, and bandwidth of 5-2300MHz. These splitters are made to connect to any size of coaxial cable, which includes newer RG6 cable or older RG59 cable and will support any device that works with coaxial connection.

• 5-2300 MHz (2.3GHz) RF bi-directional digital coax/coaxial cable splitter for CATV, satellite and MoCA configurations
• Internal circuit board for better reliability/durability
• Low signal loss of 3.5db on each output port improving performance and speeds
• All ports are power passing for easy connection to satellites, amplifiers, and cameras
• High shielding structure lowers digital noise and improves signal quality

User questions & answers

Question:	How exactly does this work & do i need it for my Bolt
Answer:	Should work just fine
Question:	Can I use this to split one Directv signal into two? In other words, get the same dtv signal on 2 different tvs
Answer:	Thank you for the question. You can use the splitter outside, but it's recommended to use it in a house box or premise box to keep from getting water inside. Grounding is recommended, however, the splitter will work without grounding. The purpose is to keep your wires from damage, and potential fire damage in the event of a surge.Keep in mind, your cable system only needs 1 grounding point. So, if you have an established ground before the 3 way that's in place, that's all you need. (Don't add a 2nd ground) If you are unsure about grounding, it's best to have a professional look at it.If you have other questions, feel free to contact us directly through the buyer messaging system.Thank you
Question:	Will this splitter work to connect coax cable to modem and connect to tv for cable at the same time
Answer:	You don't need to connect anything to the input if you are just using the splitter for MoCa, but we recommend terminating the port with a 75 ohm terminator.
Question:	Someone els has asked this question and I'm curious what the outcome was ??? Can you use this in reverse to connect two antennas to one coaxial cable
Answer:	No. What you are looking for is called a diplexer, and you will need two to accomplish what you are attempting to do.

Product description

Bam splitters were designed by 2 highly experienced cable Technicians who were frustrated by the lack of access the general public had to high quality components for their cable setups. Bam splitters were built to give an improved experience for the end user very high quality, bi-directional, high performance Solid built, 4-Way coax cable splitters designed for CATV, satellite, or antenna services. They use frequency spectrum 5-2300 MHz for Optimal performance on all devices. Whether you are using cable internet (broadband), TV or phone, satellite TV, or antenna system We have you covered. Works great with Mocha systems. Zinc die-cast housing with nickel plating, F-type connector, low insertion loss, high isolation, max passing current 0.5a, DC 24V, multi-outputs. These splitters are made to connect to any size of coaxial cable, which includes newer RG6 cable or older RG59 cable and will support any device that works with a coaxial connection. Unlike some cheaper splitters, which contain thin soldered wires to connect each port, bam splitters house A much more durable and reliable circuit board for passing signal from port to port. The shielding improves signal quality for internet and VoIP devices improving speeds and lowering packet loss.

• 5-2300 MHz (2.3Ghz) RF bi-directional digital Coax/ coaxial cable Splitter for CATV and satellite and great for Mocha
• Internal circuit board for better reliability/durability. Outside is weather resistant design for keeping elements out
• Low signal loss of only 7dB on each output port improving performance and speeds
• All ports are power passing for easy satellite Connection
• High shielding structure lowers digital noise and improves signal quality, reducing packet loss for modems, and for all other devices

User questions & answers

Question:	I want to hook this up to my direct tv dish for the signal and run two boxes with two separate wires. Is this what I need
Answer:	Yes, it should not give you any problems.
Question:	Can I use this outside my house to split my Comcast cable? The current 3 way splitter they are using is not grounded. Do I need to ground this 4 way
Answer:	It is my understanding that there will be about 7db of signal loss on each port. The more you split the signal, the weaker it gets. This is not usually a problem unless you are starting with a weak signal and then splitting it multiple times. If you need a stronger signal, you can put a signal amplifier as close to the source as possible.
Question:	Do I need to actually plug anything into the input on this? I just want to link multiple moca 2 devices on existing home wiring
Answer:	These devices are passive with no "active" electronic circuitry. As such they essentially perform a resistive "split" taking and input signal and splitting it to 3 outputs, each with a lower "output" signal than the "input". BUT, since the device is passive, signals can go both ways from the "outputs" back to the "input", again with some reduction in signal levels for the input and other outputs. It's a bit complicated so you might think of it as a major 2 lane roadway as the signal "input", but with 3 additional smaller single lane secondary roadways that permit signal "traffic" to either exit to them from the main roadway, or have smaller roadways provide "signal traffic" back to the main highway with no one-way roads, stop signs or traffic lights to impede the signal "traffic" flow.
Question:	Can i use this device to add an ota signal from an attic antenna to the cable from my catv service and then separate the signal at the rear of my tv
Answer:	You'll need an adapter (transformer or balun) that goes from a 300 ohm ("old screws") to 75 ohm F-Connector (pushpins). You can likely find one at Home Depot or Lowes. Failing that, Amazon has them for about $7- here: https://www.amazon.com/dp/B07FFNTNQV/ref=sxts_kp_tr_2?pf_rd_p=8778bc68-27e7-403f-8460-de48b6e788fb&pd_rd_wg=gnveX&pf_rd_r=CACFYS8SY3ZC0AX3DFDE&pd_rd_i=B07FFNTNQV&pd_rd_w=go4gS&pd_rd_r=f0993bb1-701f-451b-9271-7e563935a8bb&ie=UTF8&qid=1546465511&sr=2

• ⏪5-2500MHz (2.5GHz) Coax Splitter:Tolmnnts digital coaxial cable splitter is designed for CATV, Satellite TV,Antenna System, Internet and MoCA Configurations.
• 🔼Premium Quality Coaxial Splitter: Zinc die-cast housing with nickel plating and F-type connector, which are weather resistance, rust-proof and more stable.Get your premium quality, long life span.
• 🔼Low Signal Loss:Internal circuit board,high shielding structure for better performance. Which can lowers digital noise and improves signal quality, reducing packet loss for Modems, and for all other Devices.
• 🔽Easy to Use:All coaxial ports are power passing, which can make your satellite connection much easier.
• ⏬What's Included in the Package:1x Coaxial Splitter, 2x Screws,2x Screws Plug,1x User Manual .

User questions & answers

Question:	Will this splitter work to split the cable signal between cox contour and a cable modem
Answer:	Yes it is. You can read it on the description: 5-2300 MHz (2.3GHz) RF Bi-Directional Digital Coax/ Coaxial Cable Splitter for CATV and Satellite and great for MoCa. Also, it says ALL PORTS POWER PASS.
Question:	Would this allow inserted dc on one port for antenna amp to appear on second output port? wouldn't this be dangerous to other connected tvs
Answer:	Will work fine
Question:	Will this coaxial splitter work outside
Answer:	Not to familiar with types of satellites out there but I have the one you put in your window. So I run a cable in to BAMF 8 way and it gets distributed through out the house. I can watch different stations on different TVs. Please note that my satellite cama with an amplifier, I noticed that it helps a lot to push the signal through out the house.
Question:	Is it possible to connect two antennas to one tv with this splitter
Answer:	Yes but you will need to split at the main source. A cable splitter divides the original signal into equal segments. An 8 way splitter will give you 1/8 of the original signal to each outlet. Use the smallest splitter possible for your needs.

Product description

This 2/ 3 / 4 / 6 / 8 - way Signal Splitter splits a coaxial video signal from cable TV, antenna or a VCR for connection to different devices.

• 5-2300 MHz 75Ohm TV F Splitters, Bi-Directional
• Accepts coaxial 'F' Type fittings
• Epoxy-sealed back-cover anti-corrosion plating
• Allows for a couple units to be operated from one source
• Internal circuit board for better reliability/durability. Outside is weather resistant design for keeping elements out

User questions & answers

Question:	Would this worl for multiple RF video game systems like atari and colecovision
Answer:	Although only the house-hold A.C. power block is supplied, the tip injects 12.0Volt D.C. into this TV, so grab a radar detector cord and insert the "wine cork" end to a battery bank that runs car/truck items.
Question:	Can this be used in reverse? I.e two inputs; one output
Answer:	no
Question:	Will this allow power from a control box to antenna for rotating the antenna
Answer:	No,they are not rechargeable.
Question:	Anyone know what db drop per port these are for the 6 port
Answer:	no

Product description

The BDA Broadband Telecommunications Drop Amplifier is a two-way 1Ghz Amplifier. Its is designed for Customer Amplification. The Arris BDA-42-4-PR-R is a 4-Port Amplifier that can be used to compensate for long drops and excessive splitting losses. The BDA-42-4-PR-R is housed within a robust aluminum die cast housing and utilizes the Arris FFT Auto-Seize F-Connector for maximum reliability. The BDA has built-in duplex filters for two-way operation. A Passive Return Path is provided for continuity and enables the use of multiple (up to 4) broadband devices. The BDA-42-4-PR-R is and upgrade and replaces the former S-4 4-Port Signal Amplifier.

• The BDA-42-4-PR-R is a Bi-Directional Cable TV Amplifier and over-the-air (OTA) HDTV amplifier designed for use in homes. Boosts signal by 5x in the forward path.
• Compatible with all standard and digital Cable TV services. The amplifier should be installed BEFORE splitters and long cable runs for best results. 1-year warranty.
• Meets all applicable IEEE surge standards for all output ports, which enhances system reliability. Weather seal and protective coating allow use of the amplifier for indoor or outdoor applications. 36" White connection cable and PCT-TT installation tool included.
• NOT FOR USE WITH SATELLITE DISH SYSTEMS. It will block the signal between the dish and receiver. NOT FOR USE WITH AMPLIFIED ANTENNAS. Using with an amplified antenna may cause total loss of OTA signals. If you antenna comes with any type of power cord, it is amplified.

User questions & answers

Question:	Can just help with poor internet signal
Answer:	Sorry, If dvd player attached to Surround AV Receiver
Question:	It does work analog and digital antenna
Answer:	No you do not need more cables. The HDMI cable has both sound and video. You are going to have to trouble shoot each item starting with the cable. And work your way by eliminating each item. Is the cable new and have you used it before with any other device? My blue-ray worked straight out of the box however I had a dvd player already hooked up with HDMI so I simply used all of the same wires. If you had to test the blue-ray player then see if you can hook up some rca jacks the red yellow white ones to the audio portion of the player and the tv. That way you can at least see if you get sound from the blue-ray player. If you have a different device to use the hdmi cable with I would test that but if you have used the cable before and you know it works then yes, you need to start checking settings on the box or even the tv.
Question:	will this work with my outdoor digital antenna
Answer:	Samsung BD-H6500 vs. BD-J7500 BD-H6500 (2014 model) versus BD-J7500 (2015 model)BD-H6500 may be the best choice1) Considerably lower price2) Same user features, i. e., 3D, UHD passthrough & upscaling, etc.3) BD-6500 has excellent reviews4) Both have dual core processors for fast load speedMajor consideration is in your current entertainment system:1) BD-J7500 is a better choice for those with older HDTV's that do not have 4K UHD pass-thru as it includes (2) HDMI out. That allows connecting (1) to the HDTV and the second to an older HDMI equipped audio receiver to achieve digital audio pass-thru It also includes 7.1 analog connections for older style audio receivers.Read full review
Question:	I currently have hdtv antenna but i have keep moving it because my local channel keeps pixilating or too low of a signal. will this help me
Answer:	If you have a 4K TV, it will display the signal it's fed. If you don't have a 4K blu-ray disc then it will upconvert as best as possible but unless you have a 4K player with a 4K blu-ray disc will your 4K TV be able to put out all true 4K in all it's glory. Some blu-ray players enhance or shall we say upconvert the reg blu-ray disc better than others but I'm sure you won't be too disappointed. As time goes by, 4K discs and more 4K movie content will become more abundant and you'll be ready for the future.

• 【HDMI Splitter 1 in 2 out】The HDMI splitter distributes video and audio signal form 1 HDMI source to 2 HDMI displays simultaneously. No signal loss, no lag and create impressive high-definition picture.
• 【4K Ultra HD Resolution】The 4K HDMI splitter supports HD resolution, including 3D, 4K x 2K@30hz, 1080P. You can enjoy the most luxurious movies or games with your friends or families.
• 【Easy to use】The 1x2 HDMI splitter plug and play, you just need connecting the 4K HDMI cable to your devices and allow you duplicate the screen to different rooms. Input cable distance ≤ 5m (1080P resolution), Output cable distance ≤ 10m (1080P resolution). (Not support extend monitors).
• 【Wide Compatibility】Compatible with HDMI V1.4 and HDCP1.3 (Will not bypass HDCP Signal). It can connect to most devices with HDMI interface such as Blu ray players, Xbox, PS4, PS5, PC, DirecTV and more.
• 【You will get】1* HDMI splliter 1x2; 1* HDMI cable; 1*5V Power Adapter. And come with one-year best After-sale service. If you have any questions please do not hesitate to contact us, We will try our best to solve problem for you.

User questions & answers

Question:	I have a desktop computer with one hdmi port. i want to run 2 monitors in extended view. can this product do that or only mirror
Answer:	Dear Customer, Thank You for Your Advice. This TV has its Own Antenna.
Question:	What is the highest resolution
Answer:	No I use my smartphone ear buds
Question:	does this work to split video and audio coming from comcast cable box to video from my projector and audio to my soundbar (both hdmi
Answer:	The coax cable must be connected and the cable service must be active and sending a signal. Be sure you have the input correctly selected.
Question:	Can i output to one tv at a time
Answer:	ningún bluetooth, ningún wifi

Product features

Support 4K,3D

NEWCARE 4K HDMI splitter supports different resolutions display up to 4k, including 3D, 4K, 1080P @60hz, 1080P @30hz. In order to get the Highest resolution of this HDMI splitter, We recommend to use a high quality HDMI 2.0 standard cable to connect.

Wide Compatibility

Works with all devices fitted with an HDMI port.

such as: PCs, laptops, gaming consoles ,XBox, PS3/4, Blu-Ray DVD player, Satellite Receiver, Route Roku, projectors, TV receivers , HD-Ready, Apple TV, Samsung TV and more.

Have More fun

Connect one HDMI source to play simultaneously on two HDMI TVs or Monitors.

Both displays will show the same video and audio simultaneously. Sharing the most luxurious signal with your friends and family.

(Package includes: 1* HDMI spliter 1x2 + 1* HDMI output cable + 1*5V Power Adapter)

Product description

The ANTOP 3-ways Splitter AT-706 splits a single incoming coaxial signal, such as satellite signal, over-the-air HD (digital TV) antenna signal, into three outgoing signals.



Precision zinc die-cast with 18K gold-plated chassis for maximum signal transfer, corrosion resistance, and reliable connectivity.



All ports DC Power Passing enables DC power from all outputs to pass the power to the input (or in the opposite direction). Thus all satellite receivers can supply LNB power, while all amplified outdoor antenna or masthead amplifier can be powered from the interior power supply devices. Care should be taken to ensure the input of a receiver will not be damaged by power from another receiver. Reverse powering protection is provided in many receivers and systems.



Product Information

l  All ports female F connector 75 Ohm

l  All ports DC power pass

l  Light weight and compact size

l  Zinc die-cast with 18K gold-plated

l  Low insertion loss, high return loss and isolation for satellite and over-the-air HDTV signal

l  Two pieces of screws attached



Technical Specification

l  Screening factor:5-300MHz≥75dB,300-470MHz≥75dB,470-1000MHz≥65dB,1000-2050MHz≥55dB

l  Insertion Loss: 6.5dB(5-47MHz),7.5dB (47-1000MHz), 8.5dB (1000-1750MHz), 9.5dB (1750-2050MHz)

l  Isolation:20dB (5-2050MHz)

l  Return Loss:10dB (5-47MHz)

l  Receiving Range: TV/SAT.

l  Impedance:75Ω

l  All Port DC Pass: 24V/200mA (max.)

• ⚙Low insertion loss, high return loss and isolation for better performance on TV and satellite signal
• ⚙Splits a coaxial cable signal source (cable/satellite/antenna) to three destinations
• ⚙5-2050MHz (2GHz) frequency range for compatibility with all digital ready RF signals
• ⚙Precision zinc die-cast with 18K gold-plated chassis for maximum signal transfer and corrosion resistance
• ⚙High shielding structure for lower digital noise and higher signal quality

User questions & answers

Question:	Are the 3 outputs balanced? ...what is their signal loss
Answer:	Two holes for screws it appears
Question:	I have an antenna that has a power box to it. regular digital splutters do not work. we are trying to hook up 4tvs to the antenna. any suggestions
Answer:	Under normal circumstances, plugging in the USB interface will work normally.
Question:	Is there any effect on image resolution
Answer:	The TV only receives and parses the ATSC digital broadcast signal. For cable TV signals, and satellite signals can't be processed, but if you are transmitting ATSC digital broadcast signals then you can use them normally.
Question:	Are these made in USA
Answer:	With USB interface

• 1.Type: 3-way F-Type Combiner Splitter,satellite TV splitter,tv signal splitter
• 2. TV Cable Splitter Allows 2 units to be operated from one source like cable television (CATV), VCR, DVD, HD-TV, Satellite receiver, cable box, or antenna into multiple outgoing signals,and all other home theater audio/video equipment.
• 3. Designed to split a single coax cable such as cable television, satillite receiver etc. into multiple signals.
• 4.F Coax Cable Splitter Easy to assemble and disassemble,High shielding structure lowers digital noise and improves signal quality, reducing packet loss for Modems, and for all other Devices
• 5. Package Included:2pcs * 3-way F-Type Combiner Splitter，Gold plating resists corrosion and provides rigidity

Product features

TV Cable Splitter Allows 2 units to be operated from one source like cable television (CATV), VCR, DVD, HD-TV, Satellite receiver, cable box, or antenna into multiple outgoing signals,and all other home theater audio/video equipment.

Designed to split a single coax cable such as cable television, satillite receiver etc. into multiple signals.

Easy to assemble and disassemble,High shielding structure lowers digital noise and improves signal quality, reducing packet loss for Modems, and for all other Devices Package Included:2pcs * 3-way F-Type Combiner Splitter，Gold plating resists corrosion and provides rigidity

• The gold plated balanced coaxial cable splitter 2 way splits an incoming coaxial signal from cable television (CATV), VCR, satellite receiver, cable box, or antenna into multiple outgoing signals
• Convenient and cost-effective 2-pack coax splitter 2 way provides spare or replacement units to use on different devices, including a MoCA adapter
• Gold plated MoCA splitter ensures a corrosion free connection and increases durability for the antenna splitter
• Precisely constructed zinc cast housing is radio frequency shielded to reduce insertion losses between 5-2450 MHz
• The splitter is also referred to as coaxial splitter, coax splitter, coax cable splitter, RG6 splitter, RG6 cable splitter, F type splitter, cable TV splitter, TV signal splitter, RF splitter, F pin splitter, coaxial video splitter, and coaxial digital splitter

User questions & answers

Question:	Will these used together work as a diplexer for ota and satellite (directv) splitting both over one cable
Answer:	I tried and it worked but I had an issue where my directv signal strength dropped about 20%. I then used the product bellow and the Splitter at the TV side separating back one cable to the tv rf in the other to the satellite receiver with minimum signal loss I just had to switch it. https://www.amazon.com/Wideskall-Plated-5-900-Coaxial-Switch/dp/B0199FSMGK/ref=mp_s_a_1_4?adgrpid=58903143587&gclid=CjwKCAjwzJjrBRBvEiwA867byq-f_3TrzpXHozoJBxmKaFRmhkbx58hGXb0y6ya3uwZ3IX4YQAPQSBoCsDMQAvD_BwE&hvadid=274680352971&hvdev=m&hvlocphy=9009992&hvnetw=g&hvpos=1t2&hvqmt=e&hvrand=15553942612325185371&hvtargid=kwd-303364360040&hydadcr=19223_9665532&keywords=2+in+1+out+coax+splitter&qid=1567037655&s=gateway&sr=8-4
Question:	can 1 output go to fios tv box and the other output to fios internet router/modem
Answer:	I connected the cable to the single side, then both the frontier (formerly FIOS) internet router/modem and my TV's cable box on the double output side. Both my computer, wifi and tv work great.
Question:	It work for cable tv
Answer:	yes it does
Question:	i want to put 2 over the air antennas into one cable, will a splitter do that, and will there be spoitter that will boost my single in the prosess
Answer:	You need a combiner, not a splitter. I have that setup already on my home and I had to get a special one that combines the signals and also allows power pas through to both antennas so you can put a pre-amp on each antenna.

Product features

2 Way Coaxial Cable Splitter

The Cable Matters Gold Plated Coaxial Splitter splits a single incoming coaxial signal from a cable television (CATV) line, VCR, satellite receiver, cable box, or antenna into multiple outgoing signals. Gold plating ensures a corrosion-free connection. Convenient and cost-effective 2-pack of coaxial splitters can be used on a variety of devices like TVs, cable modems, and more.

Complete the Connection

The coaxial splitter is a critical gateway for home entertainment and connectivity. Expand a single cable line into multiple lines to support all of your entertainment and networking accessories: A cable modem, cable boxes, networking hardware, and more.

Coaxial Compatible

• Cable television (CATV)
• VCR
• Satellite receiver
• Cable box
• Antenna

Instant Coax Cable Connection

• Instantly connect a coax cable to your TV
• RG6 coaxial cable compatible

Reliable Signal Transmission

1. Precisely constructed zinc cast housing
2. Gold-plated F-Connector housing