• Protective Grill - Keeps your subwoofers safe and sound
• Optimized for Infinite Baffle (Free Air) applications or 1.3 cu ft sealed enclosure
• RMS watts each: 300 Watts
• Peak Wattage: 600 Watts
• Two Year Wet Sounds Warranty

• Dimensions: Width 51" x Front Height 9-3/4" x Rear Height 7-1/4" x Depth 13-1/2"
• Install Location: Under Rear Seat (Down Firing)
• Install Notes: No Modifications Required
• Mounting Depth: 5-3/4 Inches
• Air Space: 0.95 Cubic Feet

User questions & answers

Question:	Do you need shallow subs or can I use normal subs
Answer:	100% USA madeMiter and dadoo constructionHeavy duty staplesUSA laborUSA glue45 degrees Bracing insideYes will hold upThank you
Question:	Will this box extend beyond the edge of the seat in a crew cab even at the bottom edge
Answer:	Hello Cameron, we only have the green camo look right now in stock. We have had the Marpat look before but at the moment we do not.Thanks for the question and we hope to help you again.
Question:	Will JL W3 fit
Answer:	Hello Cody, the full dimensions are listed here below, thank youWidth 33Height 18.75Depth 17Vent Width 2.75Vent Height 17.149 Vent Depth 16Gross Cubic Feet Per Side 5.95Net Cubic Feet Per Side 4.15HZ 38
Question:	Can I get this for a 2017 titan crew cab? Or will this one fit my
Answer:	According to what I found those have a 13.83" cutout.. This box has a 14.06" cutout so it should fit in the box fine... It is recommending a 4.25 Cu Ft box though and this box is only 3.0 cu ft.. That doesn't mean it does not work it just means it is not the ideal box for it.. The one with that type of volume is the SPL-15DV from Atrend... It is not as cool looking as this one but is 1" MDF.. It is also huge..

Product description

Atrend Bbox A152-10CP Dual 10” Sealed Subwoofer Enclosure Fits 1999-2007 Chevrolet / GMC Silverado / Sierra Extended Cab

From the Manufacturer

1997 - 2007 GM Extended Cab Dual 10-Inch Down Firing Subwoofer Enclosure

• Accu-Tuned 10” Dual sealed subwoofer enclosure designed for optimum bass response and low frequency reproduction which is ideal for lower profile sound quality subwoofers.
• 2.42 Cubic Feet Net Volume internal air space(.93 per sub) is ideal for tight accurate bass reproduction. Subwoofer Mounting Depth is 7” which is ideal for lower profile subwoofers.
• OEM-Fit is designed and engineered specifically for the 1990-2007 Chevrolet / GMC trucks to ensure an OEM fit without impeding the operation of the back seat. High-Grade MDF for Ultimate structural rigidity and no-flex construction.
• Specially Formulated Aliphatic Wood Glue to ensure an airtight seal between all MDF parts with a second application of glue around all internal joints after final assembly. Premium OEM Grade Carpeting for factory look and durability.
• Dimensions Sub cut out: 9.125”, mounting depth:7”, front height: 9.25”, rear height: 6.75”, width: 51.25”, front depth: 14.75”, rear depth: 13.13

User questions & answers

Question:	What is the box volume
Answer:	1 can. Don't buy it. Just go to Autozone. This seller is trying to scam buyers out of their money.
Question:	Will kicker cvr 124 fit in this box
Answer:	Cherry but be warned I must have purchased a bad batch because they we're all dry. Needless to say I was upset.
Question:	Will it fit in my 2002 Chevy avalanche
Answer:	Yes!
Question:	Will this fit my 2 12inch comp Rs
Answer:	No, you can use one mold. It'll be half the number of holes. So the 6 hole mold will make 3 bombs.

Product features

Vehicle Specific Applications

Atrend has been an industry leader since 1996, continually extending the boundaries of customer satisfaction and striving to raise the bar at every opportunity.

We proudly introduce the Bbox line of Vehicle Specific Enclosures for a wide variety of applications.

High Quality Construction Techniques

All Bbox Vehicle Specific Enclosures are made from High Quality MDF featuring fully glued & braced assembly. Each Vehicle Specific Enclosure is designed to meet and exceed even the harshest conditions while offering superior sound and build quality.

Unsurpassed Fit and Finish

All of our Vehicle Specific Enclosures are engineered with a near perfect factory fit in mind. We strive to maintain the maximum usable space in a vehicle while delivering the best performing subwoofer enclosure. Most enclosures are available in either a Premium Carpeted or durable, Tough Guard bedliner finish.

Product description

Pyramid Model : BNPS102

Dual 10'' 1000 Watt Bandpass Speaker System w/Neon Accent Lighting

Built-In Neon Accent Lighting

Two 10'' High Power 4 Ohm Sub-Woofers

Silver Polypropylene Cone

Specially Treated Black Rubber Edge Suspension

2'' High Temperature Aluminum Voice Coil

Bandpass Alignment For Extra Deep Bass

Plexi-Glass Front Window

4 Tuned Ports

1000 Watts Peak Power

Frequency Response: 35Hz-1K Hz

Dimensions: 14''D x 28.5''W x 13''H

The BNPS102 from Pyramid Car Audio features two 10-inch woofers in a custom-built band-pass box. This drop-in system is designed to create some serious bass, with a monster 1,000 watts of power handling and its bandpass design. As an added bonus, the built-in neon accent lighting gives it an attractive custom look.

High-Powered Subs

The BNPS102 comes loaded with two 10-inch high-powered Pyramid subwoofers. They feature a silver polypropylene cone for rigidity with good internal damping, to deliver more accurate and well-rounded low-end. Polypropylene is also known for its weather resistance, which is ideal for the temperature extremes common to automobile applications.

A specially treated rubber surround is also ready for a beating, and the 2-inch aluminum voice coil can handle high temperatures, for all-around performance no matter how hard you're hitting it.

Bandpass Design

Bandpass enclosures give you the best of both worlds. In this case, the two 10-inch subs are mounted inside a sealed chamber, which then deliver sound to the ported chamber through four specially tuned ports and into your vehicle. The result is a narrow frequency range with tons of volume, without sacrificing efficiency.

A Little Flash . . .

Sound may be everything, but a little bit of visual appeal never hurts. The BNPS102 features a plexiglass front window and built-in neon accent lighting with that in mind.

Two-Year Limited Warranty

Get some added peace of mind with your purchase thanks to Pyramid's two-year warranty.

BNPS102 Specs

What's in the Box

Pyramid BNPS102 enclosure and user's manual.

• SILVER POLYPROPYLENE CONE: This is for rigidity w/ good internal damping, to deliver a more accurate & well-rounded low-end. It is also known for its weather resistance, which is ideal for the temperature extremes common to automobile applications
• EXTRA DEEP ALIGNMENT: Car Subwoofer Bandpass Speaker System has a bandpass with an alignment of extra deep bass. It was made with extra deep bass to be able to produce a loud sound that makes you feel the vibrancy and have fun listening in your car
• RUBBER EDGE SUSPENSION DESIGN: This speaker system was designed a specially treated black rubber edge suspension, so the only vibrations you’ll be hearing will come from your music. A specially treated rubber surround is also ready for a beating
• BANDPASS DESIGN: Bandpass enclosures give you the best of both worlds. The two 10-inch subs are mounted inside a sealed chamber, which then delivers sound to the ported chamber through four specially tuned ports and into your vehicle
• 1000 WATTS PEAK POWER: This drop-in system is designed to create some serious bass, with monster 1,000 watts of power handling and its bandpass design. As an added bonus, the built-in neon accent lighting gives it an attractive custom look
• 1,000-watt subwoofer enclosure features two 10-inch subs in a custom bandpass box
• Subwoofers feature silver polypropylene cones, rubber surround, and high-temperature aluminum voice coil

User questions & answers

Question:	This is for toyota corolla
Answer:	Dear Customer, Welcome to HIGOGOGO Store. The HIGOGOGO floor pillow is made in China. This seat cushion has good rebound effect, breathable and comfortable, relaxing your hips. Hope for the cooperation with you. HIGOGOGO Service Team.
Question:	Would these fit in my 1999 pontiac grand am
Answer:	Dear customer, Welcome to HIGOGOGO store. This cushion is about 22x22 inch. It is not 18x18 inch. But there may be a little size difference due to manual meature and compressed packaging. The seat cushion will restore after you take it out from the compression bag for a few hours. Hope you like it. HIGOGOGO Service Team.
Question:	how thick is the plexiglass
Answer:	Dear Customer, Welcome to HIGOGOGO Store. You can wash the floor cushion by hand, then put the floor cushion in the ventilated place. The filling will be more fluffy after exposing in the sunlight for a few hours. Best Wish. HIGOGOGO Service Team
Question:	how do i install the light and gain control panel to the box i cant find a place to plug it in can u please tell me where i am suppose to attach it
Answer:	Hmmm. I knew I was just getting the case & the listing did say what size pillow. The case size should be sufficient to fig’r our pillow size.

Product features

1000W Dual Bandpass Speaker System

• Built-In Neon Accent Lighting, Two 10'' High Power 4 Ohm Sub-Woofers
• Silver Polypropylene Cone
• Specially Treated Black Rubber Edge Suspension
• 2'' High Temperature Aluminum Voice Coil
• Bandpass Alignment For Extra Deep Bass
• Plexi-Glass Front Window
• 4 Tuned Ports
• 1000 Watts Peak Power
• Frequency Response: 35Hz-1K Hz
• Dimensions: 14''D x 28.5''W x 13''H

Product description

Adding bass to a truck can be a very complicated problem to tackle, especially when building a box! We offer pre-built enclosures that are ready to be dropped into your 99-06 Chevy Silverado / GMC Sierra truck that offer unbeatable performance and sound quality that simply cannot be matched. This is a dual 12" down firing model, why down firing? This style enclosure actually increase the SPL output of your subwoofers forcing the sound waves to travel up in down inside the cab before reaching the listener. The woofers are spaced off the floor so it's not possible for them to hit the floor while playing. It also keeps the subs out of view for security concerns. Overall you cannot find a better fitting or sound box at this price! Our boxes are made from precision cuts of MDF. They are then liquid nailed, nailed and completely sealed. We then wrap them with high quality carpet that matches most vehicle interiors. All Boxes feature high grade spring loaded terminal cup(s) for the absolute best connection possible. All the custom series enclosures are made to fit precisely into your Chevy Silverado 99-06 Extended Cab to the get the max performance from every extra inch of wasted space. We guarantee you will not only see a difference in the quality of the boxes we build, but you will hear the difference and that is what is it is truly all about.

• Dimensions: Width 51" x Front Height 9-3/4" x Rear Height 7-1/4" x Depth 13-1/2"
• Install Location: Under Rear Seat
• Install Notes: No Modifications Required
• Mounting Depth: 5-3/4 Inches
• Air Space: 0.95 Cubic Feet

User questions & answers

Question:	Can the rear seat fold down as normal
Answer:	Yes the seat will operate normally or at least mine did
Question:	Will it fit in a 95 z70 Chevy Silverado
Answer:	I don’t think so
Question:	Anyone put boss phantom 12s in this or will they fit
Answer:	I ordered this box said it was going to fit my GMC and it doesn't even come close to fitting inside the truck. As far as the subs I would check the sub depth and make sure they fit the Box
Question:	My subs are 6-1/2" deep from the back of the mounting ring to the back of the magnet. Will these fit in your box
Answer:	I had to make an extra 3/4 ring for mine to fit

Product description

We finally have a custom fit enclosure available for the new body style 07-12 Chevy Silverado / GMC Sierra extended cab truck! This dual 10" enclosure is designed to fit under the rear bench seat and is a down firing model. Why down firing? Not only does it help improve the overall SPL output of the subwoofers but it also keeps the subs out of view for security reasons. This enclosure is compatible with a wide range of sub brands and model but entry level and flat piston subwoofers tend to work best. Our boxes are made from precision cuts of MDF. They are then liquid nailed, nailed and completely sealed. We then wrap them with high quality carpet that matches most vehicle interiors. All Boxes feature high grade spring loaded terminal cup(s) for the absolute best connection possible. All the custom series enclosures are made to fit precisely into your 07-12 Chevy Silverado Extended Cab to the get the max performance from every extra inch of wasted space. We guarantee you will not only see a difference in the quality of the boxes we build, but you will hear the difference and that is what is it is truly all about.

• Dimensions: Width 55-3/4" x Front Height 8-3/4" x Rear Height 5" x Depth 14-3/4"
• Install Location: Under Rear Seat
• Install Notes: No Modifications Required
• Mounting Depth: 6 Inches
• Air Space: 0.60 Cubic Feet

User questions & answers

Question:	Will my skar d4's have enough clearance to not hit the carpet
Answer:	yes! my sandisk ssd is 7mm and it fits into an 12.7mm and 9.7mm hdd caddy.
Question:	Will a speaker with 6.1 inch mounting depth fit
Answer:	I am using a 1TB WD Black hard drive with no issues. 500GB was probably the most it was tested with.
Question:	Can this fit in my 2014 silverado LT crew cab
Answer:	I'm not, but you could if you wanted to. The way I have my set up is I replaced the standard HDD with an SSD and installed OSX on that. Then I transferred the original HDD to this product and now use it as my storage drive.
Question:	How much clearance is there from the front of the woofer to the floor once installed? Can you/should you use grills for added protection
Answer:	Thickness of your original hard disk drive is the main issue. The other dimensions are standards. Take the drive out of your notebook computer and measure the thickness with a metric ruler. There are three thicknesses: 12.5mm, 9mm, and 7mm. Smaller should fit a larger thickness bay, but you may have to add some padding to make up the difference. Larger than your bay will, of course, not fit. So order a size small if you are unsure or if there's a great deal on a 7mm drive and you have a 9mm drive installed. You can just put some foam or a bit of cardboard in there to take up the slack. In short, the only really crucial factor is not to buy a drive THICKER than your computer can accomodate.