12 best ir remote extenders

• STREAMLINE your entertainment center by hiding your cable box, receiver, amp, Roku & other IR controlled devices hidden behind closed doors. No more boxes sitting out on the shelf or leaving cabinet doors open when your watching TV just so you can use your remote control! Give your living space a more refined, more streamlined look! CONTROL 1 to 4 devices using our kit depending on which model you choose. We have models to cover 1, 2 or 4 devices. Choose the model that best suits your setup for
• COMPATIBLE with all IR controlled devices! We have tested our IR repeater kits with thousands of IR devices to make sure that they work and work well with all frequencies of IR dual band included. No matter the make/model of your devices, as long as they use an IR remote control, our IR extender kit will work with it. Compatible with: Charter, Cisco, DirecTV, Dish Network, Marantz, Motorola, Onkyo, Roku, Scientific Atlanta, Sony, Spectrum, U-Verse, Yamaha, & more! Still uncertain? Contact BAFX!
• SIMPLE, EASY & COMPACT setup with our all-in-one cable IR repeater / remote control extender kit. Plug the USB into your TV, set top box or other device for power (you may also use a wall adapter - sold separately), then paste the emitter using it's own adhesive over the IR receiver on the device you wish to control. Lastly, place the IR receiver end in the line of sight of your remote control (no further than 28' from remote control) and that's it! You're all set!
• RESISTANT to interference from stray infrared sources such as plasma TV's & CFL lightbulbs! Worried that your plasma TV or CFL bulbs will cause interference with this IR repeater just like your old IR repeater you bought years ago? Worry no more! With our new plasma resistant technology nearly all of these trouble causing stray IR signals are filtered out! No more randomly changing channels or flashing lights caused by your TV or lightbulbs!
• EXCELLENT MANUFACTURER WARRANTY from BAFX Products. Even though this is extremely inexpensive, BAFX Products stands behind everything we sell or we won't sell it. Your all-in-one IR extender is covered by our 1 year warranty against manufacturing defects and is super easy & simple to claim should the need arise! We also extend Amazon's normal 30 day return period with our 60 day, no hassle, no questions asked return policy. Miss the return window from Amazon? No problem. Just contact BAFX!

User questions & answers

Question:	Is this compatible with a tcl riki tv
Answer:	I am assuming you mean a TCL Roku TV correct? I just purchased this for mine and it works like a charm. With one caveat, if you power it with the USB from the TV, you have to manually turn the TV on to activate power to the USB. If you power it will and external USB power supply you will be able to turn the TV on and off. Also keep in mind the TV's IR receiver is on the bottom of the screen in the middle in a whitish plastic area below the screen.
Question:	Does the transmitter portion need to be directly over the device to be controlled, or can it be a few feet away in line of sight
Answer:	As long as in line of sight.
Question:	Which is the receiver and which is the emitter?? One is larger than the other
Answer:	The picture depicts from left to right the receiver, the emitter and the USB. The receiver is the larger one.
Question:	Where exactly do you put the emitter on the cable box? Only the volume and power are working on the remote
Answer:	I reviewed this item as junk; the emitter being the issue. You need to look through (use a flash lite) the (usually red) cover on the cable box and find its emitter. You then need to place the "all in one' emitter DIRECTLY over it. Good luck getting it to work.

Product description

Now with greater dual band compatibility our kit will work with ALL IR controlled devices!

Want to place the cable box or other A/V devices out of sight yet be able to control them from in front of your TV? Our IR Repeater (aka remote control extender) kit allows you to do just that!

How it works: The kit will relay the IR signal, through wires, from where you are using the remote control to the end device. The IR receiver of the kit (eye) is placed within sight of (within 25’) of where you will use the remote control from. The emitter from the kit is placed over the IR receiver on the device being controlled & each receiver & emitter wire is plugged into the distribution block. Now, when pressing a button on the remote control, the signal will be amplified & sent through the system to your devices!

Kit includes:

1 Distribution block

1 IR Receiver (5’ long tip to tip)

4 Dual head IR emitters for up to 8 devices (Cables are 8.5’ long)

1 Power adapter

Manual

Link to a setup video

1 Year Manufacturer Warranty

Specs

IR receiver cord is 5' long - receiving range up to 25’

Emitter cables are 8.5’ long – emitting range 2-4”

Receiver & emitters can be extended using a 3.5mm Stereo AV extension cable

Distribution block measures approx. 1.9"x4.3"x0.87" & has slots for mounting

Distribution block can be powered by a USB printer cable (NOT included)

Expandable to 3 IR receivers & 6 emitter cables

*IMPORTANT* PLASMA TV’S Plasma TV's emit infrared signals that can interfere with the IR receiver of the repeater (Not applicable to LCD or LED). This can be fixed by placing the IR receiver slightly further away from the plasma TV

• BUILD – Create the A/V setup of your dreams with the help of our Infrared repeater kit. Our kit allows you to place any IR controlled device out of sight of the remote control and still be able to control it. Put the cable box, DVD player & Roku in a closet hidden from view, close the door and STILL be able to use the remote control.
• IMPROVED! Now compatible with ALL IR controlled devices with better performance, no lag & better ease of use. Now also compatible with Marantz devices! Compatible with all brands of components such as: Uverse, ATT, Cisco, Scientific Atlanta, Yamaha, Sony, Logitech, Verizon, LG, Apple & more!
• WARRANTY & SUPPORT – BAFX Products offers a 1 Year Warranty against manufacturing defects with a simple & super easy claims process. Not to mention our friendly and knowledgeable USA based support who are ready to help answer your questions and assist in getting you setup!
• COMPACT – A smaller footprint than many other kits on the market allows the main block to placed just about anywhere along with a new and smaller IR receiver for a more discreet look. With the addition of mounting tabs on either side it can even be affixed to a wall, cabinet or ceiling!
• CONTROL – With the provided components you can control up to 8 infrared devices (Expandable to 12 devices) from one location with the included IR Receiver (Expandable to 3 receivers). Extra Receivers and transmitters may be purchased separately.

User questions & answers

Question:	I currently require two remotes to control all my audio/TV equipment. I cannot get them all onto one master remote. Do I need two systems
Answer:	No you do not need two systems. This unit simply relays IR signal(s) sent from any remote to your devices hidden away. You stick one of the four IR blasters coming out of the unit on the IR eye of each of your devices and the IR receiver on the edge of your TV. Then you point any remote at TV and press button. The signal will leave your remote to the IR receiver and through the cord the unit. From there the unit will replay the signal to all 4 IR blasters that are placed on the IR eyes of your devices (STB, DVD, AV Receiver, etc...)
Question:	This item can work with my logitech harmony one remote
Answer:	Yes. The way this system is designed it will basically pick up any remote using IR technology, which is what the Logitech remote uses. Cheers!
Question:	Can anyone say with certainty this WILL work with directv dvr and directv genie plus other components? Seems there are several conflicting opinions
Answer:	I have this BAFX Repeater, and I also have the DTV HR54-700 satellite box. The repeater does NOT work at ALL with this satellite box. The IR signals come from my Philips Pronto TSU7000 - AND the repeater works FINE with all other connected devices Such as my Sharp Aquos TV, the LED Bias Lighting module on the back of that, a Denon receiver, RCA receiver, and a Philips DVD player The Pronto works intermittently with the satellite box by itself - as long as it is NOT too close to the satellite box As soon as I put the BAFX emitter over the IR receiver window - - IR stops working. I've put up to 6 layers of painters tape over the window - - NOTHING. And Yes - - I have verified (watching with a digital camera: NOT an iPhone) - the emitter sends an IR signal when the BAFX system receives one. - SO - - My thoughts: DTV may be using a different IR light wavelength than what is transmitted by the BAFX. The question of course is - - WHY would DTV do that ?? Answer is ea$y to figure out. It's $o you can't u$e an all-in-one remote - - you have to RENT one of their$
Question:	What is the length of the receiver cable
Answer:	The receiver cable length is about 5 feet. You can buy a CAT5 extender setup which allows you to go much further here: https://www.amazon.com/dp/B016VEFI00/ref=cm_sw_em_r_mt_dp_U_GsokEbPHY5B42

Product features

How the IR Repeater Kit works

The setup is very is simple.



You will simply place the included distribution block in a location near where you wish to keep the devices you need to control with your remotes. From this block, you will run the provided IR receiver cable (or the eye of the kit) from the distribution block and place it in a location where you can point the remote control at, this may be on the bezel of the TV, on a shelf ledge, the wall or other such locations. You will need to place this IR receiver no further than 30' from where you will be using the remote control.



Now, plug one of the emitter cables into the distribution block and run that cable to where you have your devices being controlled located. You will place one emitter head from this cable over the IR receiver on the devices being controlled.



Lastly, simply plug the repeater kit into power using the supplied power adapter and you're ready to go!

Compaitibility

Many people wonder if our kit is compatible with a particular device.



Our repeater kit will work with all IR controlled AV devices. This includes but is not limited to devices such as: Logitech, Uverse, Onkyo, Sony, Pioneer, Yamaha, Cisco, Scientific Atlanta, Marantz, Denon, LG, Philips, Verizon Fios, Roku, Charter, Dish Network, DirecTV, Epson & More!



Should you have any troubles getting the BAFX Products IR repeater kit to work with these or any other IR controlled devices the BAFX Products Support team will be more than happy to assist you!



Important note: The repeater kit will NOT work with RF or Bluetooth remote controls

 

Kit Includes

• 1 Distribution block

• 1 IR Receiver cable

• 4 Dual head IR emitters for up to 8 devices

• 1 Power adapter

• Manual

• Link to a setup video



Specs



• IR receiver cable is 5' long tip to tip

• Emitter cables are approximately 8.5' long

• Distribution block measures 1.9" x 4.3" x 0.87"

• Has slots on sides for mounting

• Expandable for more 2 more emitter cables & 2 more receivers

• Dual band compatibility

• Distribution block can be powered by USB printer cable & wall adapter (not included)

• Emitters & Receiver may be extended using standard STEREO headphone extension cables

 

Additional Important Notes

Plugging directly into IR ports on devices: On some devices you may notice IR in/out ports. You MAY be able to use a Male to Male cable to connect our kit with such devices. We cannot promise that this will always work. It will depend on whether the device manufacturer has wired their port the same was as our kit and also handles the signal in the same manner. We have verified that many Onkyo & Denon devices do work with this but cannot make promises as to this.



Plasma TV's: Plasma TV's emit stray infrared signals. In some rare cases these stray signals may interfere with operation of the kit. In such cases simply moving the IR receiver slightly further from the TV will resolve this issue. LED & LCD TVs do not have this problem.



Extending via CAT5 lines: For this we offer a prepackaged CAT5 adapter kit that may be purchased separately. The parts may also be obtained individually on their own as needed.

• IR remote control cable extends the signal to a video source like a Blu-ray player so it can be controlled from your TV; Blue LED in IR Receiver bulb verifies the signal transmission
• Home theater accessory repeats the IR signal to a DVD player, STB box, Receiver or other A/V source with an IR sensor; Route the infrared remote control extender cable out of sight with a wall mounted TV; Install the IR Transmitter end in a concealed equipment closet to hide a CATV box and control it remotely
• Simple installation of this lightweight IR cable; Locate the IR Blaster near the source sensor to repeat the signal to the source; Place the IR Receiver in a convenient location with line of sight of your hand-held remote; IR Tx and Rx cables have adhesive circles on the back for mounting
• USB powered IR extension cable has an integrated 6 foot Y-cable to receive 5V USB power; USB cable on the IR remote extender cable connects to a TV USB power port or to a USB wall charger
• Universal compatibility of IR extender cable with most A/V equipment with infrared sensors (not RF); 30 degree IR Receiver angle provides plenty of leeway to get the right angle with your remote

User questions & answers

Question:	Will this work with newest Spectrum Arris device
Answer:	It works with my new Arris DCX3510M HD DVR box. However the IR reception range is only 7-8 ft max. And you will need a separate USB power supply because the Arris USB ports only work when the box is on.
Question:	How close does the IR emitter need to be to the device receiving the signal
Answer:	The smallest one needs to be right on point to work. You will need a second person to help while you adjust and they try the remote.
Question:	Does it have to be Synced to the remote
Answer:	No. This is a simple device that simply passes on the infrared signal. Whatever the remote shoots into this device's receiver will be transmitted to the other end. It took only minutes to set this up. We put cable box behind the TV screen. Attached the receiver end to the underside of the TV, near current remote sensor just so it is the same target area you are used to, the other end of the extender gets aimed at the cable box on the other side. The cable box has USB so that was used for the power. Amazing product
Question:	What does 10feet mean
Answer:	Means 10 feet long from starting to end.

Product features

Remote Control Solution

The Cable Matters Infrared Extender Cable is the perfect solution for controlling a Blu-ray player, CATV box or another video source from your TV. Use your TV remote even when a soundbar is blocking access to the IR sensor. Connect to home theater components that are concealed in a cabinet or nearby closet.

Important Notes

• Test the cable before attaching with the adhesive backing
• Check that the USB TV port provides 5V USB power or use a USB wall charger
• Not compatible with a set-top box using (RF) radio frequency signals
• Bright sunlight or CFL light bulbs can cause interference

USB Power Boost

• Power with a 1-amp USB wall charger
• USB Y-cable length = 6 Feet

IR Compatibility

• 30-60 KHz receiving frequency
• CFL bulbs or bright light can cause interference

Lightweight Extender Cable

• Flexible wire is easy to secure
• Coil any excess wire with a cable tie

Product description

To set up a professional looking, clean home theater (especially set-ups with wall-mounted HDTVs) you will usually want to move your Blu-Ray players, DVD players, TIVOs, and other video equipment out of sight. Since your remote controls rely on line-of-site communication to control your equipment, you won't be able to use them unless you can send this signal (known as infrared or IR) to your equipment with an extender.

• This product is not compatible with the following models of the AT&T U-verse cable box: Cisco Explorer 4642HDC, IPN 4320, IPN 330HD and the Motorola VIP series, there are other models of the U-verse that are also likely to be incompatible with the BlastIR
• Provides one IR receiver input and six IR emitter outputs
• Works with practically all brands of Audio/Video IR remote controls

User questions & answers

Question:	I can't figure out where the connections (V+/G/ST/IR) go from the wall receiver to the main unit (+12VDC/GND/Status/Signal) - help pls
Answer:	not exactly. but if they work in jf cruiser
Question:	Does this work with FIOS 7xxx HD DVRs
Answer:	Not sure ones I bought fit a Mazda
Question:	What is the maximun length of cable that the BlastIR can support? Will it reach over 150ft Cat5e cable to send it's repeated signal
Answer:	I didn't feel like it fit my car well and I have a Nissan Rogue sport. I would not recommend for leather seats either
Question:	can I operate 2 televisions off of 1 cable box
Answer:	Yes. Mine is a Volvo 2016 S60

Product features

BlastIR Classic + Wall Plate Receiver kit

Since remote control IR signals need "line-of-sight" to work, you will need this extender if the equipment you're trying to control is hidden out of sight such as in a closet or cabinet.

Troubleshooting and Support

Troubleshooting: If you're having trouble setting up your BlastIR PRO, it is very easy to troubleshoot. The videos on Sewelldirect will show you how easy it is to set up and troubleshot your BlastIR.

Please Note : This product has been known to have compatibility issues with certain U-verse, Motorola VIP, and Cisco Explorer cable boxes.

Product description

Multizone: Protect from Interference Most IR extenders are programmed to pass any signal that is sent through the receiver. Sometimes this may disrupt your setup as a few devices in your closet run on a similar IR frequency and cause interference with one another. The Multizone feature protects your devices from interference from other devices. This gives you the ability to have certain devices controlled only from specific areas in your setup. This has been a requested feature from many of our customers as they have extended IR signals but unintentionally were controlling two devices located in the same space. Cable boxes have especially been a pain since multiple cable boxes are easier to have based in the same area. Now with the BlastIR Wireless Multizone you are able to ensure you will only control the box that is attached to one of your TVs and not the other. The Channel IR System The Multizone feature works on a 10-channel system, this system gives you the ability to interact with your devices without needing to worry about your Wireless Extenders interfereing with one another. The system also gives you the option of using any number of transmitters or receivers on any given channel. This gives you complete freedom of choice for where your displays and devices can be placed without having to complicate your setup. The BlastIR Wireless Multizone Receivers will only communicate with the BlastIR Wireless Multizone Emitters that are set to the same channel. If you happen to own the classic BlastIR Wireless, this product will also work with it. Channel 0 on this product will allow IR signals to be sent between the two diffferent versions.

• NOTE Some devices us RF instead of IR for remote control. The Blast IR Wireless Pro only works with IR devices.
• 10-channel system that gives you the ability to interact with your devices without needing to worry about your Wireless Extenders interfering with one another
• Included USB and AC power cables, extra IR cables, mounting adhesive, and rubber feet
• Known compatibility issues with: Yamaha HTR 6140 and Arris DCX 3520E-M
• Control any IR device from a distance. Blu-Ray Players, Cable and DVR Boxes, AV Receivers, Logitech Harmony Devices, Anything else that uses an IR signal!

User questions & answers

Question:	I can't figure out where the connections (V+/G/ST/IR) go from the wall receiver to the main unit (+12VDC/GND/Status/Signal) - help pls
Answer:	They connect from from the receiver to the main unit via standard telephone cable (CAT3) not supplied. V+ is +12VDC, G is GND(or the minus side of the power supply), ST is the status LED and IR is the signal.
Question:	Does this work with FIOS 7xxx HD DVRs
Answer:	It works perfect with va comcast DVR. So I magazine other DVRs will work. You'll have to find the right spots to place the 2 sensors for best performance. The only device that the infrared device doesn't work well with is an older Sony reciever I have hooked up. I only get volume control with this.
Question:	What is the maximun length of cable that the BlastIR can support? Will it reach over 150ft Cat5e cable to send it's repeated signal
Answer:	Yes.
Question:	can I operate 2 televisions off of 1 cable box
Answer:	I have a TV and cable box in my man cave and HDMI ran overhead to a TV in adjoining exercise room. I have an HDMI splitter in the man cave. I want to simply be able to use the cable remote from the man cave TV to change channels from the exercise room, going through one wall. I'll just take the remote to whichever room I'm in. Do I need anything else other than this item. I couldn't ask all this in the questions, maybe someone will see this answer, sounds similar. I'm already operating 2 TVs off a single cable box with a splitter but want to use the remote in both rooms.

Product features

Multi-Zone Control

The BlastIR Wireless Pro supports up to 10 zones with independent sending/receiving frequencies. (kind of like different channels on a walkie-talkie). You can change the zone by using a very small rotating switch located at the bottom of the receiver and emitter pucks. The Receivers will only communicate with the Emitters that are set to the same zone. You can also purchase extra Emitters, or Receivers individually if you do not need an extra full pair.

All-to-All

The BlastIR Wireless Pro can be set to send the signal from All Receivers To All emitters by setting all the units to the same "Channel" or "Zone"

Zone-To-Zone

The BlastIR Wireless Pro can be set to only send the Signal from one Receiver to specific emitters.

Troubleshooting and Support

Troubleshooting: If you're having trouble setting up your BlastIR PRO, it is very easy to troubleshoot. The videos on Sewelldirect will show you how easy it is to set up and troubleshot your BlastIR.

Please Note : This product is NOT Compatible with the Yamaha HTR 6140, Arris DCX 3520E-M, or the OSD ATM-7 Speaker Selector.

Product description

This newly designed 38-56 kHz Wideband STB IR Receiver Extender is made and sold exclusively by Inteset Technologies. It will work with nearly all Cable Set Top Boxes and DVRs that have an active IR IN port. Previously you had to choose either the 38 kHz or the 56 kHz model. This product eliminates having to make that choice but it will not work with all A/V devices. Please check compatibility below.



This allows you to hide your STBs and DVRs behind closed doors in a cabinet or closet. The small receiver bud (1 1/4"L x 7/8"W x 5/8"H) will handle all of the same functions as if your device was out in the open. It comes with self stick tape on the back of the IR bud for easy installation. Be sure to mount the bud with a straight line-of-sight to your remote.



It will work with most Comcast Xfinity and Verizon FIOS boxes as well as other cable providers that use Arris, Cisco, Scientific Atlanta and Motorola boxes except those noted below.



It will NOT WORK with AT&T Uverse STBs, Motorola DCT or DCH Series, QIP2500, QIP6000 Series, DISH or DirectTV boxes. These models and some models specific to particular cable providers either do not have an IR IN port or that port is not active. The 4250 HDC is one of those. It also will NOT WORK with A/V Receivers, Amplifiers, TVs or IR Repeater Systems as the connectors are usually wired differently. If you have any questions about compatibility, contact us before you buy any extender.



If you have any questions or issues you can contact us at: "universalremotes.net"

• WORKS ONLY w/CABLE Set Top Boxes (STB). Please check your device to be sure you have an active 3.5 mini input port labeled "IR IN". Contact us if you have any questions about compatibility before you buy.
• 20-25 ft range from remote control to IR receiver. High Immunity to ambient light and noise
• Highly Reliable with high sensitivity for wide range. Works great with our INT-422 Remote
• 6 ft shielded cable, 3.5 mini plated stereo plug. Tip-VCC 5V, Center-Data, Lower-Ground
• Works with all Universal Remotes and most Cable Boxes with an active IR IN jack

User questions & answers

Question:	Does this work with arris ipc1100 box
Answer:	A better choice is below but this will also work. https://www.amazon.com/dp/B00YFC2IQ8?ref=myi_title_dp
Question:	What is the length of the cords
Answer:	Cable is 6 feet but can be extended to over 50 feet with a standard extender cable.
Question:	Does this fit for charter spectrum box
Answer:	Hi, that is what I used it for (Charter Spectrum Cable Box). It works fine, but note that you should have the cable box pluged in and turned on before you install the IR receiver/extender into the IR port on the back of the cable box.
Question:	Will this work for Harmony hub
Answer:	This is a receiver and the Harmony hub doesn't have a IR Input port, so this isn't a product that can be used with Harmony. What you need is an emitter.

Product description

1. IR Repeater Kit comes with 1 receiver and 5 dual emitters that could be able to control up to 10 home theater devices kept behind closet doors or in a closed cabinet with IR Infrared Remote Control Extender Repeater System.

2. IR Repeater System allows you to control A/V equipment with your existing IR remote controller, such as: receiver, amplifier, TV, home theatre system, cable box, stereo receiver, Satellite TV receiver, CD player, DVD player, Blu-ray player, Etc.

3. Plasma displays emit IR frequencies during use and may cause interference.

4. It is advised to distance the IT receiver from any plasma TV or display ability to control multiple appliances at various locations up to 10 m1.

5. Connect IR receiver to any of the 3.5 mm ports on the IR transceiver,IF 2 or more IR receiver are connected, the distance between 2 IR receiver should not be less than 6 m to avoid interference.

6. CFL friendly: this unit can be installed in an area with compact fluorescent lighting and work in the most lighting environments.

7. Remote indication lights on IR receiver:green being power connected while flashing red indicates the signal is being sent.



Package Content:



1x Distribution block

1x Power plug

1x IR Receiver (Length: 5 Ft)

5x Dual IR Emitters (Length: 10 Ft)

1x Manual

• Infrared Repeater Kit controls your IR remote controlled devices that are hidden behind doors or in other rooms. Kit controls up to 10 devices - Expandable to 12 devices
• IR Repeater controls up to 10 home theater devices kept behind closet doors or in a closed cabinet with IR Infrared Remote Control Extender Repeater System. This product allows you to control A/V equipment with your existing IR remote controller, such as: amplifier, cable box, stereo receiver, Satellite TV receiver, CD player, DVD player, Blu-ray player, Etc
• IR Repeater Kit comes with broadband remote control, it is compatible with almost all the electronics appliances in the market with its wide frequency range. IR remote control repeater ( transceiver) is a product which amplifies the IR signal of your appliances, you may be able to conceal your appliances such as in your TV console or cabinet
• High sensitivity, Real time transmission without any delay with its high sensitivity sensor. Remote indication lights on IR receiver:green being power connected while flashing red indicates the signal is being sent. CFL friendly: this duafire unit can be installed in an area with compact fluorescent lighting and work in the most lighting environments
• Note: plasma displays emit IR frequencies during use and may cause interference. It is advised to distance the IT receiver from any plasma TV or display ability to control multiple appliances at various locations up to 10 m1. Connect IR receiver to any of the 3.5 mm ports on the IR transceiver,IF 2 or more IR receiver are connected, the distance between 2 IR receiver should not be less than 6 m to avoid interference

User questions & answers

Question:	when it is receiving an ir signal from the hand-held TV remote? Does remote sensor have a led to indicate
Answer:	Yes, everything was fine and very fast. Whenever it detects an IR signal from any source then the indicator is blink.
Question:	What is length of this receiver cable
Answer:	The length of receiver cable is 5ft
Question:	Is there an extension available for the receiver module? 5' isn't long enough for my setup
Answer:	I have used these for years where the receiver may not be right at the cabinet or closet location. I normally extend the cable using an shielded 2 conductor cable. I have also used non shielded with no issues, but i believe the included cable has a shield. I have not tested the length it would be good for, but i have gone at least 50' this way.
Question:	Does this product work with the sony str-dn1050 receiver
Answer:	It works with any device that uses an IR remote.

Product description

Comply with U.S safety certified ---This IR-repeater have been approved by FCC, CE and RoHS,don't need to worry about accidents.



For all kinds of location---Suitable for home, hotel and bar!



With 20-60KHz frequency to the remote controller and long range 700 feet between the receiver and the emitter , you can remotely control your DVD and speaker with this product to enhance your product experience!



New champion! ---Creative design takes up close to ZERO storage space.



Quality Control---The material and whole manufacturing process are meet with the industry requirements, which is with feature of high- temperature resistance and fire resistance, as well as high strength and toughness.



Specification:



1 x Wireless IR Receiver



1 x Wireless IR Emitter



1 x IR Receiver Extension Cable



1 x IR Emitter Extension Cable



2 x AC power adapters



2 x USB Power Cables



1 x User Manual



2 x 3M Adhesive



Note:Please refer the user manual carefully for installation. If you have any questions, please email to our customer service in time, we will reply to you within 24 hours!

• ▶▶Wireless Repeater- The Best Choice for Fashion：This is an creative product to hide the components which is controlled by the infrared remote controller,suitable for families, companies, hotels, etc. The people who are tidy and fashional,can use this artifact to hide their A/V components in an entertainment system cabinet or wardrobe to get more clean.
• ▶▶Wide Compatibility :Both the infrared emitter and the receiver's frequency is 20-60KHz, compatible with most infrared-equipped devices such as DVD players, cable boxes, satellite receivers, audio/Hi-Fi stereo systems, etc.
• ▶▶The Best Distance and Technology: 700 feet long range between the infrared emitter and the infrared receiver, and the infrared receiver can cover your remote controller with 30 feet long distance and 90 degrees. Only use the extension cable if needed.
• ▶▶Hassle-free Installation and Instant Transmission:Highly sensitive modules provide a real-time signal transmission without delay. Built-in LED indicator ,the repeater will illuminate if it receive a signal .Please keep in mind to place the extension cables in line-of-sight of the source IR sensor no further than 2 inches for best signal.
• ▶▶12 MONTHS WARRANTY, 100% SATISFYING GUARANTEED:Contact us with any questions.One year warranty of the product from the date of purchase.Any issue just don’t hesitate to contact us.

User questions & answers

Question:	I have 6 (Hitachi) projectors and need a receiver for each in a planetarium setting. Can individual receivers be purchased
Answer:	They connect from from the receiver to the main unit via standard telephone cable (CAT3) not supplied. V+ is +12VDC, G is GND(or the minus side of the power supply), ST is the status LED and IR is the signal.
Question:	When using IR emitter bud, will emitter transmit through the bud and the main emitter unit at the same time or the signal only goes through the bud
Answer:	It works perfect with va comcast DVR. So I magazine other DVRs will work. You'll have to find the right spots to place the 2 sensors for best performance. The only device that the infrared device doesn't work well with is an older Sony reciever I have hooked up. I only get volume control with this.
Question:	How to attach the emitter bud
Answer:	Yes.
Question:	Do you know id this would be compatible with a Hitachi projector
Answer:	I have a TV and cable box in my man cave and HDMI ran overhead to a TV in adjoining exercise room. I have an HDMI splitter in the man cave. I want to simply be able to use the cable remote from the man cave TV to change channels from the exercise room, going through one wall. I'll just take the remote to whichever room I'm in. Do I need anything else other than this item. I couldn't ask all this in the questions, maybe someone will see this answer, sounds similar. I'm already operating 2 TVs off a single cable box with a splitter but want to use the remote in both rooms.

Product description

Designed and sold Exclusively by Infrared Resources.Designed in the USA. 9 feet long with 3.5mm end plug. IR receiver is 38~56kHz

This compact (.53 x 1.12 × .43 ) 1/2 inch wide, 1 inch long and 1/2 inch tall. IR Receiver truly is universal. It works with ALL of the major Cable Set Top and DTA (Digital Transport Adapter) Boxes. Including VERIZON FiOS, Comcast, S/A Scientific Atlanta Explorer ,Except the box models listed below in the Will Not Work list.

Allows you to hide your equipment and operate the equipment remotely. Simple plug and play. Unplug the power from the cable box then plug the IR receiver into the IR IN port. Plug in the power for the box.

NOTE: Not for use in TV (Smart) IR port. The IR port on TV monitors are IR OUT not IR IN

The front IR sensor on the Cable box will disable once the IR receiver is plugged in. RNG models front IR sensor does not disable.

Works With: Samsung STB SMT-H4372,Scientific Atlanta Explorer 46xxHDC Series, 9865HDC,8742HDC Explorer (with IR IN port on the back panel) Comcast X1 RNG Set Top Boxes VERIZION HD DVR QIP 7xxx series and VM1101 model Cisco CHS435HDC,CH335HDC HD DVR, LG LST-4600A HD PACE DC551P,DC55 PACE/ DC700X Apache. Comcast X1, RNG110, PACE/CiscoRNG150, RNG100, PACE TDC787X HD, PACE TDC 575D DVR, DC50X, DCH100, DCX3300, DCX3220e, DCX3400M, DCX700, DCX3416, DCX3425, DCX3432, DCX3501, DCX3600, MVIX 760 HD Media Player. DTA50,DTA250 and other DTA models

Will Not Work With: Motorola DCT or DCH Series, QIP2500, SA Explorer 4200, 4200HDC,4240 HDC4250,4250HD,8240HDC,8260HDC,8200 series 8300, 8300HD , Series,DC60xu. 2100DHCT, 3100DHCT,3250HD, Verizon QIP 6416-2 , 6000 series Motorola DCX3200-M, DCX3400, DCX3510M, DISH, Direct TV, AV STEREO RECEIVERS(Harmon Kardon etc) OR IR REPEATER SYSTEMS,or directly plugged into TV’s.

. All trademarks are the property of their respective owners.

• AVOID RETURNS: USE ONLY WITH CABLE BOXES WITH AN ACTIVE IR IN PORT LABELED IR IN OR EXT. IR (NOT SERIAL) LOCATED ON THE BACK OF THE CABLE BOX. LOOK UP YOUR MAKE AND MODEL NUMBER USER GUIDE ONLINE. REFER TO THE BACK PANEL PAGE. PLEASE EMAIL OR CALL US IF YOU REQUIRE OUR ASSISTANCE. All units are bench tested and working before leaving the factory. Refer to the trouble shooting section on the original package if need be.
• Works with VERIZON FiOS, Comcast, Scientific Atlanta Explorer,Cisco,PACE,Motorola,Arris, and DTA Set Top Boxes Will NOT work with SA 4000HDC series,4200/HDC,4240,4250/HDC,8300/HD,8240/8260HDC box, A/V Receivers,TVs or IR Repeater kits
• LOOK AT SIDE PICTURES TO COMPARE SIZE OF COMPETITORS. Ours is only 1/2in wide. Thinnest available! Perfect size to blend into current flat screen frames.Hide your cable box in a cabinet, down in the basement or A/V rack or room using this small (.53 wide x 1.12 long x .43i tall )IR receiver with 9 ft lead to 3.5mm gold stereo plug.
• REPLACES Cisco/Scientific Atlanta IR Extender 1004648,4029013,4022323
• 25 Years Experience Manufacturing And Supplying The Cable And Hospitality Industry

User questions & answers

Question:	States it works with 9865hdc but is not. is this supposed to
Answer:	It should work. Try unplugging the power from the box for 30 seconds while keeping the IR receiver plugged in. The box will reboot.
Question:	Will this work with Cisco explorer 8640hdc
Answer:	when plugged into the IR port on the Cisco Explorer 8640hdc will the the IR on the front of the 8640 also still work?
Question:	Will this emitter work with an Xantech connecting block
Answer:	It will not work with Xantech. They have a different pin out and the block also requires 12v as ours is 5v. We do offer our IRP repeater kits if interested.
Question:	how it works? do I need to buy two? one goea do cable box and the other to the tv
Answer:	What is the cable box model number? You only nee one to plug into the IR IN port on the back of the box. The receiver is placed on or near the TV frame

• ✅ High sensitivity: Remote control signal receiving real-time response to fast forward without delay
• ✅ Allows IR signals to pass through solid doors or walls, line-of-sight to the components is not required Confirmation LED built-in to the IR receiver acknowledges receipt of IR commands
• ✅ Easy Setup: This IR Repeater System is easy to use and sets up in minutes
• ✅ 5V USB Power Supply(Adapter not included)
• ✅ Control Audio Video Components in Entertainment Cabinets or Equipment Closets using Existing IR Remote Controls

Product description

HI Speed chip sets works MHZConvert existing IR remote to digital RF by replacing 1 battery in a remote with the battery transmitterControl 2 same-brand components independently from anywhere in the houseWorks with most AA and AAA remotesReceiver has built-in chargerAvailable in 433 MHz frequencies. Includes single-eye IR emitter and 2 2/3 AA specially sized rechargeable batteries

• refer the FAQ below for troubleshooting
• Go room-to-room and control your components from up to 100 feet away
• Specially designed 2/3 AAA batteries are rechargeable in base station
• 433.92 MHz base unit emits IR signal to your nearby devices
• Convert as many remotes as you like with extra battery transmitters

User questions & answers

Question:	distance
Answer:	Wanted this for Dish network remote. It doesn't work period. Maybe on other remotes but not Dish
Question:	Does this device work with verizon fios HD DVR QIP
Answer:	I use it in master bedroom on fios hd box. remote is in sitting room on another floor. I can then use remote to access box upstairs and don't need second fios hd box.
Question:	does this work with TIVO
Answer:	TIVO doesn't NEED it! My Tivo Roamio works fine though walls without the Nextgen. But my Time Warner/Frontier box needs it.
Question:	I see no purpose or application for the 2/3 rechargeable AAA. Is anyone using this and if so, please describe exactly how. TX
Answer:	The 2/3 rechargeable AAA is essential ... otherwise there is nothing to power the special sleeve (which makes the 2/3 battery in a full AAA battery). There is no other way to power the RF transmitter.

Product description

Infrared External Receiver for Verizon FiOS cable boxes. Simple plug and play. Plugs directly into the IR IN port on the back of the cable box. The IR receiver mounts on or near your TV . It will work with QIP7000 series, VMS1100, IPC1100,,IPC4100CHS335,CHS435, DTA271, DTA50 etc. Will not work. QIP2500 or QIP6000 series, SA 4000HDC series,4200/HDC,4240,4250/HDC,8300/HD,8240/8260HDC box , AV Stereo receivers, IR Connecting block Repeater kits, or TV sets. Copyright 2017 Infrared Resources LLC All rights reserved

• AVOID RETURNS: USE ONLY WITH CABLE BOXES WITH AN ACTIVE IR IN PORT LABELED IR IN OR EXT. IR LOCATED ON THE BACK OF THE CABLE BOX. If the box is listed as compatible but does not work when plugged in try unplugging the power from the cable box for 30 seconds while keeping the receiver plugged into the back of the box. The box will reboot. All units are bench tested and working before leaving the factory.
• COMPATIBLE with Verizon Fios Cable boxes model QIP 7000 series, CHS335 and 435, IPC1100 and 4100 with SA 4000HDC series,4200/HDC,4240,4250, VMS1100,DTA271, DTA50 etc.
• NOT COMPATIBLE WITH HDC,8300/HD,8240/8260HDC box, (or port on the back of any box stating Serial). Uverse , A/V Stereo Receivers, IR Repeater connecting blocks, or Smart TV's
• LOOK AT SIDE PICTURES TO COMPARE SIZE OF COMPETITORS. Ours is only 1/2in wide. Thinnest available! Perfect size to blend into current flat screen frames.Hide your cable box in a cabinet, down in the basement or A/V rack or room using this small (.53 wide x 1.12 long x .43in tall )IR receiver with 9 ft lead to 3.5mm gold stereo plug.
• Operating distance 38kHz up to 40 feet, 56kHz up to 25 feet.25 years experience manufacturing for the Hotel and Cable industry.

User questions & answers

Question:	By using an IR Receiver, do i still need to have an hdmi cable running between my tv and cable box
Answer:	The device has nothing to do with and does not interface with the HDMI cable which I assume you are using to transmit the video signal from the STB/receiver to the TV/Video output device. So if you want to TV to both change channels/volume AND show a picture, you will need the device AND the HDMI cable. Or, you can replace both of them with a Stargate PN25 flux capacitor running at 25 to30 MHz through any model Magic Bullet.
Question:	Will this work with Motorola DCX
Answer:	It didn't work with mine
Question:	Will it work for a Verizon Fios remote control P265v
Answer:	Please note that it does NOT work with all boxes that have an IR IN port. Mainly SA Explorer boxes. We do list compatible and non compatible boxes in the product description section. Check with us before you buy. [email protected]
Question:	Will this work with a Samsung 6350 TV and the Verizon QIP7232 box
Answer:	The TV model is irrelevant as long as your box is currently operating it correctly. As to the STB, your question is answered in the device's description: "It will work with QIP7000 series, VMS1100, IPC1100,CHS335,CHS435, all Verizon set top boxes except QIP2500 or QIP6000 series ."