10 best behringer headphone splitters

Product description

If you're tracking more than one musician at once, or if everyone in a group wants to listen to a playback, you need a monitor distribution system. The compact, flexible HA400 can power up to four pairs of headphones and up to four independent volumes.

A Simple Solution

Grab this super-compact amp during your sessions to power practically any headphones--four of them at the same time, to be exact. This allows four people in your studio to listen to the main mix while recording, and each listener can determine their own volume level using the dedicated output level controls.

Quality Amplification

The HA400 contains 4 high-power stereo amplifiers that maintain the highest sonic quality even at maximum volume levels. These ultra-low-noise 4580 operational amplifiers are included for outstanding audio performance--the same op amps found in "full-size" audio equipment.

What's in the Box

Behringer HA400 4-Channel Stereo Headphone Amp, Power Adapter, User's Manual

• Ultra-compact headphone amplifier system for studio and stage applications
• 4 independent stereo high-power amplifier sections
• Highest audio quality with virtually all types of headphones even at maximum volume
• Phones Level control per channel
• DC 12 V adapter included

User questions & answers

Question:	Does this just split the audio, or does it actually "drive" headphones? If so, how many Ohms can it handle
Answer:	No. This is an 8 channel headphone amp. It simply increases the response of multiple headsets used at one time, to boost the output of each headset in a recording studio setting.
Question:	How do I use this with my laptop? I got male extensions but it doesn't seem to be working
Answer:	We use inputs on the front of the panel and at the same time use some of the ins on the rear panel and it works fine. No issues with volume. Overall a good product for the small amount of money we paid for the item.
Question:	is this just for volume control, or does it actually amplify bass, highs, lows, etc
Answer:	Yes. Just run ear buds with an adapter
Question:	does it come with the extender cord? compatible with M-Audio fast track - cord from the existing headphone jack to amp
Answer:	Hello, to the best of my knowledge, a 220v version is not available in the US. I could not find a specification in the amplifier. A lot of power amps use universal power supplies that allows a voltage from 110 to 220 @ 60 or 50 Hz to be allowed. Usually that specification is marked on the amplifier at the AC input. I don’t see that on the power amplifier images. Hope this helps.

Product features

Behringer Microamp HA400 Ultra-Compact 4

MICROAMP HA400:

If you're tracking more than one musician at a time, or if everyone in the group wants to listen to the playback, you’re need a monitor distribution system. A distribution system allows everyone to listen in, and control the volume of his or her own headphones. The compact and flexible HA400 can power up to 4 pairs of headphones and up to 4 independent volumes, with outstanding audio quality – even at maximum volume!

Altogether Now:

You can use this super-compact stereo headphone amplifier with practically any headphones – four of them at the same time, to be exact! Let up to 4 different people in your studio listen to the main mix while recording, and each listener can determine their own preferred volume level using the dedicated output level controls. The HA400 contains 4 high-power stereo amplifiers that maintain the highest sonic quality even at maximum volume levels. Ultra low-noise 4580 operational amplifiers are employed for outstanding audio performance – these are the same op amps found in “full-size” audio equipment – plus, a dedicated 12-Volt DC adapter is included.

Great Sound, Great Value:

When a recording session calls for everyone's heads – and ears to be in the game, the HA400 is the perfect solution – and a real money-saver! Let your ears guide you by checking out the amazing HA400 at a BEHRINGER dealer near you – or get yours online today.

Product description

• Ultra-compact 4-channel line mixer
• Highest sonic quality even at maximum output level
• Input Level control for each channel
• Power adapter included
• Behringer Micromix MX400 Ultra Low-Noise 4-Channel Mono Line Mixer; 3-Year Warranty Program*

User questions & answers

Question:	How would i use this? i have a behringer mixer and behringer amp. shure mics. do i plug into the mx400 and then into the mixer
Answer:	Yep works just fine, just remember its only a 40w with no extras for sound.
Question:	Is the output of this balanced, or unbalanced? ***I know it's a mono 1/4 plug***, but is it standard unbalanced 1/4, or a balanced 1/4-TRS
Answer:	1/4 inc h
Question:	could it be used to mix 4 cctv mics
Answer:	No. The amp is 110 volt ac.
Question:	I would like to listen to music on my phone and listen the sound of my game on pc, through same pair of headphones. Is this possible
Answer:	yes it does

Product features

MICROMIX MX400

Despite its ultra-compact size, the MICROMIX MX400 4-channel line mixer is really big on features! Providing the highest sonic quality at all output levels vs. the competition, the MX400 features ultra low-noise 4580 operational amplifiers for outstanding audio performance – the same chips as the ones found in its much bigger brethren.

Connections

Expanding on the capabilities of standard-size mixers is where the MX400 works its magic, for instance when it is used as a sub-mixer. If you are running short on available channels on your 'big' mixer and need to add 3 more keyboards to your mix, just connect them to the MX400, dial-in the mix – and connect MX400’s output to a single input on your main mixer. This is just one example of how the MX400 can add versatility to your current setup – just imagine the possibilities!

Small and Superb

The MX400 is the ideal solution for mixing multiple line-level signals on a budget. Sure, it’s as cute as a button – but you’ll want to own one because of what it brings to your performance. And the MX400 is so very affordable. Check one out at your Behringer dealer, or place an online order today!

Product description

Expand your headphone monitoring capabilities with the addition of this 4-channel Headphone Amplifier from Monoprice! This amplifier features four 1/4; (6.35mm) amplified headphone outputs, each with its own independent volume control. It features an extremely clean amplifier circuit, which produces a signal-to-noise ratio greater than 98dB. It accepts line-level audio input over the stereo RCA jacks on the back or headphone level through the optional 1/4; TRS jack. A switch on the back allows you to choose a mono or stereo output. The amplifier is powered by the included 12 VDC/500mA AC adapter. Specifications: Inputs: 2x RCA and 1x 1/4; (6.35mm) TRS Input Impedance: 100 K-ohms (unbalanced) Outputs: 4x 1/4; (6.35mm) TRS Output Impedance: minimum 10 ohms per channel Maximum Output Level: +22dB Maximum Gain: 20dB per channel Signal to Noise Ratio: > 98dB

• 35mm) amplified headphone outputs each with its own independent volume control
• It features an extremely clean amplifier circuit which produces a signal-to-noise ratio greater than 98db
• It accepts line-level audio input over the stereo RCA jacks on the back or headphone level through the optional 1/4 TRS jack

Product description

Note: The mixer is NOT included.

Description:

The Stereo Headphone Amplifier is specialized for sound reinforcement, studio, stage, choir and personal recording.

It features ultra low noise, premium sonic quality and wide frequency response.

If you're tracking more than one musician at once, or if everyone in a group wants to listen to a playback, you need a monitor distribution system.

The compact, flexible amplifier can power up to four pairs of headphones and up to four independent volumes.

It can maintain premium sonic quality even at maximum volume levels.

Warm Reminder:

1. Plugging 1/4-inch mono plug into headphone output may cause permanent damage to the unit, please use only stereo plug.

2. Disconnect power sources after using can prolong the product service life.

Specifications:

Dimensions(LxWxH): 1.8x2.3x4.1 inches/4.7x5.7x10.4 centimeters

Weight: 9.6 ounces/270 grams

Frequency Response: 20Hz-20kHz

Size: 4.2x2.4x1.8 inches/10.5x6x4.5 centimeters

• 4 Independent Stereo High-Power Amplifier Sections: Can power up to 4 pairs of headphones and up to 4 independent volumes; Suitable for all types of headphones
• Wide Frequency Response: 20Hz-20kHz
• Premium Sonic Quality: Maintain premium sonic quality even at maximum volume levels
• Ultra Low Noise: Offer you outstanding audio performance
• Compact and Portable Design: With a mini size of 4.2x2.4x1.8 inches/10.5x6x4.5 centimeters; Weighs only 9.6 ounces/270 grams, easy to use and carry

User questions & answers

Question:	is this a knock off or black market version of the Behringer Microamp Ha
Answer:	Hi, yes you can connect different devices using the RCA and Guitar input port. You may check other details of the unit by visiting our website pyleaudio.com. Type the model number on the search box PAD12MXUBT for more details. Thank you.
Question:	is this a knock off or black market version of the Behringer Microamp Ha
Answer:	Hi, yes you can connect different devices using the RCA and Guitar input port. You may check other details of the unit by visiting our website pyleaudio.com. Type the model number on the search box PAD12MXUBT for more details. Thank you.
Question:	Is the input mono or stereo
Answer:	Hi, you can only connect devices with active Bluetooth feature to this unit and headphone is not included. Thank you.
Question:	Can I plug a 3.5 m jack into this
Answer:	Nope, this item is independent. Microphone in, audio out. You can definitely use it with a digital recorder, but since the Neewer output is an XLR connector, you may need an adaptor if your recorder inputs are RCA or 3.5mm (“headphone jack”) size.

Product features

Neewer Super Compact 4-Channel Stereo Headphone Amplifier with DC 12V Power Adapter, Features Ultra Low Noise

• If you're tracking more than one musician at once, or if everyone in a group wants to listen to a playback, you need a monitor distribution system.
• The compact, flexible amplifier can power up to four pairs of headphones and up to four independent volumes.
• It can maintain premium sonic quality even at maximum volume levels.
• Weight: 9.6 ounces/270 grams
• Frequency Response: 20Hz-20kHz
• Size: 4.2x2.4x1.8 inches/10.5x6x4.5 centimeters

Product description

FIFINE Headphone Amplifier

• 【Share a Single Stereo Source】Amplifier 4 channel with separate volume knob for each of up to four outputs: No audio crackle,minimal distortion at highest volumes.No loss of signal when all four headphones are connected.Headphone amplifier 4 channel would be excellent for up to four people monitoring the mix for tracking,live uses and listen to the TV with earbuds while working out.
• 【Fantastic Stereo Audio Quality】Mini stereo amplifier with 4X 1/4'' Stereo Headphone TRS Output Connector Jacks,1/4'' TRS Source Input Connector Jack.◆Stereo ◆:You must use the 1/4” TRS stereo audio cable male to male connectors for input and output connection.◆Mono◆: 1/4” TS male to male connectors for input and output connection.■■TRS/TS cable is not included in package■■
• 【Compact and Portable】Solid metal build construction headphone mixer, tight connections, smoothly operating knobs. Quality components and exceptionally rugged construction ensure long life.Ultra-compact headphone amplifier system for studio and stage applications
• 【Used for Applications】Features a durable and compact design headset amplifier perfect for both on-stage and in-studio performances or application that requires multiple headphone connections.Convenience to use if two or more audio setups on your computer or using stereo amplifier to listen to music or watch TV works great.
• 【What You Get】--Ultra low noise headphone amplifier provides you outstanding audio performance. 12V DC power adapter included, with light for indicating power on.1 Year Warranty for FIFINE Headphone amplifier. if you have questions, please contact us directly to get the service

User questions & answers

Question:	can this be used on an electric guitar
Answer:	I don’t know, my speakers and headphones sound great on this splitter and I don't notice a difference from before using it.
Question:	If I plug my electric guitar (w/ cord no amp) into the input and headphones in the output, would I be able to hear myself play
Answer:	Theya are great!!!
Question:	Can you connect this to my mixer and use the outs on the splitter to connect speakers using
Answer:	No, when we used it to share a tablet for watching movies both headsets received left and right audio.
Question:	What is the amp power output
Answer:	Great product. 100% happy with product. Well constructed and works beautifully.

Product description

• Ultra-compact monitor headphone amplifier for studio and stage applications
• Personal ''more me'' mixer – mix a mic plus a monitor signal and hear them via headphones
• Flexible Mic In and Mic Through connectors plus Ground Lift switch
• Stereo Monitor input with dedicated Monitor Level control and Mono/Stereo switch
• High-power headphone output on 1/4'' and 1/8'' jack connectors

User questions & answers

Question:	Has anyone used this with a DI box in front of this unit and then plug in to this unit? For example, guitar->di box->this unit, if so did it work
Answer:	@guitar->di box->this unitLate to the party here, but other potential buyers might want to know...A DI box basically converts the unbalanced instrument level signal to a balanced mic level signal. So this should work using the Micromon's xlr input.. not the 1/4". So in this situation you may use the Micromon's xlr thru-put out to a mixer channel. Furthermore you could also use the DI box's parallel 1/4" jack to feed a guitar amp... but in that case why do you need to hear it in a pair of headphone's or iem's as others have pointed out).BUT what this unit is intended to do is let to run your mic thru (in and out of) it for extra "just me" monitoring while also receiving a normal monitor/aux send mix from the mixer into the Micromon's 1/4" input. There are other, creative uses for this unit but just know that you results may very when you use any piece of equipment in a way in which it was not intended. And yes, you likely do need to monitor an acoustic guitar if you are on a noisy stage with drums, electrics etc. The ambient sound from the guitar alone is rarely enough in a "band" situation. But at the end of the day, imo, you'll get better results and keep things simpler if you just use a simple stage monitor/wedge. Hondo.
Question:	Does this serve the same purpose as the Behringer MX400 Micromix 4 Channel Line Mixer in a way if I can get the signal to be stereo? thanks
Answer:	You can get stereo output. Inputs however are one balanced 1/4" and the second is XLR. It's a great personal mixer and I use it every time I play live. I run the board mix into the 1/4" and then direct from my Line6 X3 Live into the XLR (Mic) input.
Question:	I want to know if these would be good for all of my players in my praise and worship band. We play new style of worship
Answer:	I don't use mine for playing out just for practice but the worship team at church uses two, lead guitar and drums.Mine works great for practice also.
Question:	Can wireless headphones be used with this amp
Answer:	I'd say any type of headphone can go into this amp. It has a quarter inch as well as 3.5mm jacks. All you need to do is plug it up properly and you'll have sound.

Product features

Micromon MA400

The ultra-compact Micromon MA400 is the ideal personal monitor mixer for the performer who is always asking for 'more me.' Featuring a flexible Mic In and Mic Thru connectors and Ground Lift switch, as well as stereo Monitor input with a dedicated Monitor Level control and Mono/Stereo switch, the MA400 has everything you need to satisfy even the most-demanding performer on stage.

Connections

The MA400 features XLR Thru jacks and provides superb noise-free operation. Just connect to the Mic Input and send a line from the Mic Thru to your main mixer. You can even use studio-grade condenser mics, as the MA400 will pass +48 V phantom power, if your mixer is so equipped. The Phones jacks accept both ¼ " and 1⁄8" headphone and earbud connections, making the MA400 ideal for hardwired IEM (in-ear-monitor) applications, such as singing drummers and keyboardists. The MA400 comes with a dedicated 12 V DC power supply and an LED to indicate when it is powered up.

Masterful Monitor Mixing

Capable of either stereo or mono operation, the MA400 is a powerful little mixer that allows you to control two independent sources, such as a microphone and the monitor feed from your main mixer. Simply adjust the MA400‘s Monitor Level control.

Small and Superb

The MA400 is an ideal cure for the 'more me' syndrome – both onstage and in the studio. With its flexible routing options and a high-powered headphone output – the MA400 makes an excellent studio tool. Small enough to fit in your pocket with a price tag to match! Check out the Micromon MA400 at your Behringer dealer, or get yours online today – everyone in the band will thank you!

Product description

The Behringer POWERPLAY P16 system is the easy, affordable way to give your musicians and vocalists what they really want - "more me!" P16-M Personal Mixers lets each performer take control of what they hear, allowing the engineer to concentrate on providing the audience with the best possible listening experience. Fast and easy to set up, a basic system can be installed and configured in a matter of minutes - and the system can be expanded to adapt to changing needs. Tech-Free Zone. The P16-M's simple user interface makes it easy for even non-techies to dial-in the perfect monitor mix. For example, let's say the electric guitar is too loud in the lead vocalist's mix; they simply press the appropriate channel button (the one labeled E. GTR) and turn the Volume control to lower the guitar level in their mix. They can also adjust Pan (left to right mix), EQ (Bass, Mid with sweepable Freq control and Treble), and much more. All of these adjustments can be made without affecting anyone else's personal mix. Easy Installation A basic installation consists of one P16-I Input Module, which connects to the main mixing console, and up to six P16-M Personal Mixers, creating a system big enough to equip a typical recording studio, a small to medium-sized band, or a worship team. You'll also need a few standard audio and CAT5 cables. The optional P16- MB mounting bracket allows the P16-M Digital Personal Mixer to be attached to any standard microphone, music or drum stand. The system can easily be expanded via the P16-D Digital ULTRANET Distributor, six of which can be combined to drive up to forty-eight P16-M Personal Mixers. Extraordinary Value. The POWERPLAY P16 puts total control of the monitor system where it belongs - in the hands of the performers, freeing up the engineer to sculpt the perfect front-of-house mix. The POWERPLAY P16 system is the easy, affordable way to tame runaway stage volume and give your musicians and vocalists what they really want - "more me!"

• 16-channel digital stereo mixer to create your personal monitor mix
• Ultra-intuitive "analog" operation with total recall and 16 presets for custom mixes
• State-of-the-art 24-bit D/A converters for premium audio quality
• 16 Channel Select buttons with dual LEDs for perfect overview
• Level and Pan/Spread control per channel with LED meter

User questions & answers

Question:	How does this compare to aviom or other brands? i'm looking for a monitor system for 6 band members and i want really good quality for what i buy
Answer:	All mine (8) came with a cat5 cable
Question:	can't i do the same thing with a wireless tablet
Answer:	We are using this system to eliminate - as much as possible - the use of floor wedges/monitors. So, yes. Each musician needs a P16-M. They then dial in which of the inputs they need to hear more or less of in their personal ear-buds. NOTE: As "RY" noted in their response - you CAN, and we DID start out with two singers sharing a P16-M by using a splitter out the headphone jack to enable two sets of in-ear buds. But it was pretty disastrous. For one thing, no two people have the same "ears" and preferences. And each singer wanted more of themselves, etc.
Question:	Does is come with cat5 cable
Answer:	The Mixer built-in bluethooth, you can try it on iPad pro as input.
Question:	Does each muscian need one
Answer:	Yes, the mixer can be used to hook up turntables a mixer and a sb3 dj controller.

Product features

POWERPLAY P16-M

The POWERPLAY P16 system is the easy, affordable way to give live or recording musicians/vocalists what they really want – “more me!” The P16-M Personal Mixer lets each performer take control of his/her own monitor mix, whether on the stage or in the studio – and allows the engineer to concentrate on creating the best mix possible.

Fast and easy to set up, a basic system can be installed and configured in a matter of minutes – and the system can be expanded to adapt to changing needs. Read on to find out how the P16-M Digital Personal Mixer can improve your performance!

Tech-Free Zone

The P16-M’s simple user interface makes it easy for even non-techies to dial-in the perfect monitor mix. They can not only adjust the Volume for each of 16 input signals, but also set the Pan (left to right mix), EQ (Bass, Mid with sweepable Freq control and Treble) – and much more. And the best part, these adjustments can all be made without affecting anyone else’s personal mix. After you’ve dialed-in the perfect mix, it can be stored in one of 16 presets for instant recall at your next performance or session.

ULTRANET – Seamless Integration

The world-renowned engineers at KLARK TEKNIK, MIDAS, TURBOSOUND and BEHRINGER have all come together to create something truly innovative that will change live and studio workflow forever – ULTRANET. This revolutionary technology seamlessly transmits up to 16 independent channels of 24-bit digital audio and control data via a single CAT5 cable between compatible digital devices – including mixers, I/O stage boxes, powered loudspeakers and personal monitoring systems. Advantages realized through ULTRANET digital networking, versus traditional analog methods: audio signals are impervious to Radio Frequency Interference (RFI); signal crosstalk is eliminated; and ease of setup translates directly into significant time saved during installation. ULTRANET effectuates a powerful digital eco-system that gives you unparalleled control over every element of your audio production environment from one convenient location.

Easy Installation

A basic installation consists of one P16-I Input Module, which connects to the main mixing console and up to six P16-M Personal Mixers, creating a system big enough to equip a typical recording studio, small to medium-sized band or worship team. You’ll also need a few standard audio and Cat 5e cables. The optional P16-MB mounting bracket allows the P16-M Digital Personal Mixer to be attached to any standard microphone, music or drum stand. As many as six P16-D Digital ULTRANET Distributors can be added to your system to accommodate up to forty-eight P16-M Personal Mixers.

Features Galore

Not only is the P16-M easy to use, but it’s also big on quality. You’ll enjoy audiophile-grade sonic performance, 16 storable presets for custom mixes, 16 Channel Select buttons complete with dual LED indicators for quick and easy visual reference, and so much more. Need to hear just one element of your mix – just hit the Solo button. Someone playing out of time – select the Mute button for that input. Additionally, the global EQ and “drummer-proof” output level control ensure you’ll hear your perfect mix, in all its pristine glory.

Extraordinary Value

The POWERPLAY P16 Personal Monitoring System puts total control of the monitor system where it belongs – in the hands of the performers, freeing up the engineer to sculpt the perfect front-of-house mix. By putting dynamic control over virtually all elements (Volume, Pan, Solo & Mute) of up to 16 input signals within each performer’s reach, the P16 Personal Monitoring System provides the easy and affordable way to give them exactly what they want – “more me!” Check the P16-M out today – and experience the ultimate in live and studio personal monitoring.

You Are Covered

We always strive to provide the best possible Customer Experience. Our products are made in our own MUSIC Group factory using state-of-the-art automation, enhanced production workflows and quality assurance labs with the most sophisticated test equipment available in the world. As a result, we have one of the lowest product failure rates in the industry, and we confidently back it up with a generous 3-Year Warranty program.

Product description

The ultra-compact HM-4 4-way headphone amplifier features a 1/4” stereo input and four 1/4" headphone outputs with individual level controls. Perfect for studios or even at home when up to four people want to listen together.

• Share a single stereo source with up to 4 pairs of headphones
• Individual level control for each output
• Powered via the included 12V AC adapter
• Built-like-a-tank construction

User questions & answers

Question:	do the mackie hm-400 bass, treble and balance pots have a detent
Answer:	I dint know. I obliterated have the 4-user version, which does not have any sort of adjustment aside from volume... and there's is no detente.
Question:	Does this work in reverse, i.e., can I plug 4 stereo (line level) inputs and mix them to a single stereo output
Answer:	No, it is one input only, it's not designed (nor will it work) in the opposite direction
Question:	What is the amplification amount of this device? I am going to connect to tv out with low sound level and need to increase the sound output for 2 peop
Answer:	Its definitely enough for two people. I use it to play electronic drums along with music tracks and it works well. Tv would probably require less volume and be equally acceptable.
Question:	Does the mackie hm-4 come with a 1/4" to 1/4" tsr cable in addition to the included 12v power supply
Answer:	Hi, no it comes with HM-4 and the 12 VDC Power Supply, that's all,. Typically manufacturers don't give cables like that since it adds to the cost for them, and many people already have tons of cables. Please let us know if you have any other questions, thank you

Product features

Excellent sound quality

Premium analog circuitry and design delivers an ultra-low noise floor and high headroom.

Ultra-flexible

From a simple yet effective way to split a single stereo signal out to four pairs of headphones to robust headphone distribution, the HM Series offers a wide range of options to suit your needs.

Built-like-a-tank

With a heavy-gauge steel chassis, long wear potentiometers and switches, the HM Series is built to last.

HM-4 4-Way Headphone Amplifier

Share a single stereo source with up to 4 pairs of headphones.

Individual level control for each output.

Powered via the included 12v AC adapter.

Built-Like-A-Tank construction.

HM-400 4-Channel Headphone Amplifier

L/R Main stereo inputs plus L/R stereo outputs.

7-segment LED metering per channel plus Main.

3 headphone outputs per channel.

Aux input on each channel with balance control to mix main and aux signal.

Mute and stereo/2-ch mode switches per channel.

12 total headphone outputs.

Built-Like-A-Tank construction.

HM-800 8-Channel Headphone Amplifier

2 discrete main stereo inputs with separate level control plus stereo outputs.

7-segment LED metering per channel plus Main.

2 headphone outputs per channel.

8 independent Aux inputs for up to 8 individual stereo mixes.

Input Select and Stereo/Mono switches per channel.

16 total headphone outputs.

Built-Like-A-Tank construction.

Product description

4-Channel Stereo Headphone Amplifier, 1/4" Connectors

Compact Control Unit

Stereo Headphone Output Level Adjustment

Independent Channel Rotary Volume Controls

1/4'' Stereo Headphone TRS Output Connector Jacks

1/4'' TRS Source Input Connector Jack

Power On LED Indicator

Power Supply Included, DC 12V/150mA

Dimensions (W x D x H): 4.07'' x 1.18'' x 2.24''



If you're tracking more than one musician at once, or if everyone in a group wants to listen to a playback, you need a monitor distribution system. The compact, flexible PHA40 can power up to four pairs of headphones and up to four independent volumes. Grab this super-compact amp during your sessions to power practically any headphones--four of them at the same time, to be exact. This allows four people in your studio to listen to the main mix while recording and each listener can determine their own volume level using the dedicated output level controls. The PHA40 contains 4 high-power stereo amplifiers that maintain the highest sonic quality even at maximum volume levels. These ultra-low-noise operational amplifiers are included for outstanding audio performance.

• POWERS 4 HEADPHONES: The Pyle Stereo Headphone Amplifier is a monitor distribution system that powers practically any headphones - up to four pairs at the same time. This allows four people in your studio to listen to the main mix while recording
• INDEPENDENT VOLUME CONTROLS: Each listener can determine their own volume level using the dedicated output level controls. Features independent channel rotary volume knob control for each listener’s convenience. Also features a power ON LED indicator
• ¼” TRS OUTPUT JACKS: This 4-channel headphones splitter is equipped w/ 4 ¼” stereo headphone TRS output connector jacks which allow you to control up to 4 headphones at once. Also equipped w/ ¼” TRS source input connector jack for your Pyle Pro mixer
• SUPERIOR AUDIO QUALITY: The PHA40 contains 4 high powered stereo amps that maintain the highest sonic quality even at maximum volume levels. These ultra-low noise operational amplifiers are included for outstanding audio performance
• COMPACT SIZE: The professional integrated headphone receiver features a mini compact size and measures 4.07” x 1.18” x 2.24”, easy to carry and use on the road. Perfect for both on-stage and in-studio performances or applications

User questions & answers

Question:	Can this be used to amplify the sound coming from microphones in an auditorium (I will be using headphones
Answer:	I very much doubt it. This is a "line level" amplifier. Line level voltage is much higher than the voltage coming from a microphone. This amp is not designed to amplify a microphone.
Question:	Can i sub the power supply for a 12vdc usb cable? would usb sufficiently power this unit
Answer:	USB ports supply 5V, not 12V, so, no, you can't power this thing with a USB cable.
Question:	could this device be bridged like a car amp
Answer:	If you mean could you listen to headphones in the car with this, it is possible if you are a good technician or if your car unit has a “pre” or “pre-amp” output. Trouble is the device has a wal-wart that wants alternating current and concerts it to direct current but you could look around for a CLA with the proper output voltage and tip. So with a pre-amp output, the proper cabling, (rca l/r to 1/4” stereo or trs) and the appropriate power supply this will power headphones in your vehicle. CAUTION: Using headphones while driving is illegal in many jurisdictions- check your state or local traffic codes. This will not drive speakers well by the way... the output power is too low. Good Luck!!
Question:	Are the individual outputs amplified beyond normal "line-level" voltages? In other words, if the input is at max volume, will the output be louder
Answer:	The amplifier circuit has a maximum voltage gain of 10 (20dB). However, the actual gain you can get will depend on the impedance of the headset you plug into any given channel. The design calls for a 47 Ohm output resistor for each channel, but the two I received were manufactured with 470 Ohm resistors installed, so the output impedance was ten times what it was supposed to be. People getting units assembled with this error will see far lower gain than they should. Beware!

Product features

4-Channel Stereo Headphone Amplifier, 1/4" Connectors

This compact Headphone Amplifier can hold 4 high-power stereo headphones & maintain the clarity of sound even at maximum volume levels. These ultra-low-noise operational amplifiers are included for outstanding audio performance. It allows up to 4 people in a music session to listen to the mix making each capable of adjusting to their volume level preference.

• 【Audio Sharing】JSAUX Headphone Splitter adapter converts a single 3.5mm stereo jack to two 3.5mm stereo jacks. This Y type design enables you to share your favorite music, movies and games with your families and friends from one device.
• 【Unparalleled Sound Quality】Built with dual-shielding gold-plated connector and oxygen copper wire core making it less susceptible to outside interference, it offer the clear and clean stereo sound in both outputs.
• 【Outstanding Durability】15000+ bend lifespan & double-braided nylon exterior make headphone splitter adding to the durability and tangle free, which is different from the normal PVC Materials in market.
• 【Excellent Connection】This 3.5mm jack headphone splitter can transfer audio from your Smartphone, MP3 players, CD players, laptops, tablets to 2 output devices including headphones, speakers and more.
• 【What You Get】JSAUX Stereo Y Splitter [Nylon-Braided, 0.9ft/0.28m], our worry-free 18-month warranty and high standards of customer service.

User questions & answers

Question:	Does the sound level get lost by using this
Answer:	Yes, the cord delivers 2 channel strereo to each of the two connetions.
Question:	Why do you have specials on jumpsend that you're not honoring
Answer:	Yes it will.
Question:	Does this splitter reverse the left and right audio
Answer:	Dear WilliamThanks for your inquiryOf course, it does't debase the sound level, It allows you to share music with your family or friends through headphones from the same source. So it a perfect product for lovers to sharing music. Thanks for your all support to Ugreen. Any quesition, please kindly contact with [email protected] for more information.UGREEN GROUP LIMITED
Question:	Will this work for ps4 controller for two sets of headphones
Answer:	If you are talking about connecting two pairs of powered speakers, this adapter can split the audio signal to both pairs of stereo speakers. It you connect 2 individual powered speakers to this adapter, you will get the same signal from both speakers (left channel only), meaning that you will be missing all of the sound that should be coming from the right channel. If your setup is the latter situation that I just described, then you want a stereo to 2 mono splitter. This splitter is stereo to 2 stereo splitter.

Product features

Premium Sound Quality Hi-Fi Stereo Performance

Metal shell of this Headphone Splitter provides reliable performance and reducing signal loss. Enameled Oxygen-free copper wires seamlessly transmits stereo audio for high quality sounds.

Stereo sound from both outputs

Constructed with high-end materials, your Y Splitter has equal sound output through both sides.

Super Durable & Flexible

0.9ft/28CM double-braided nylon cord prevents tangling and adds another layer of durability, life is 5 times greater than original audio cables, will not bending or twisting wherever you take it.

Easy to take

This 0.9ft/0.28m Stereo Y Splitter takes up very little space in your laptop bag, you can take it wherever you are.